Hyundai IBT L19A00001 19" LCD Monitor User Manual ATT E MANUAL

Hyundai IBT Corp. 19" LCD Monitor ATT E MANUAL

Users Manual

FCC ID : PJIL19A00001 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI, BUBAL-EUP, ICHEON-SI, KYOUNGKI-DO, 467-701, KOREA TEL:+82 31 639 8517 FAX:+82 31 639 8525 www.hct.co.kr Report No. : HCT-FO5-0905 1/1 ATTACHMENT E. - USER’S MANUAL -
NEXTUser’s GuideType No. L17A00000 / L19A00000Model. L17T/L19TTFT LCD Color Multi Function Monitor
U.S.A.U.S.FEDERAL COMMUNICATIONS COMMISSIONRADIO FREQUENCY INTERFERENCE STATEMENTINFORMATION TO THE USERNOTE : This equipment has been tested and found to comply with the limits for aClass B digital device pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmfulinterference in a residential installation.This equipment generates, uses, and can radiate radio frequency energy and, ifnot installed and used in accordance with the instructions, may cause harmfulinterference to radio communications.However, there is no guarantee that interference will not occur in a particularinstallation.If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user isencouraged to try to correct the interference by one or more of the followingmeasures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet of a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for assistance.Changes or modification not expressly approved by the party responsible forcompliance could void the user's authority to operate the equipment.Connecting of peripherals requires the use of grounded shielded signal cables.
WE Hyundai ImageQuest CO., LTD.Ami-ri Bubal-Eub Ichon-Si Kyungki-Do467-860 KOREAdeclare under our sole responsibility that the product:to which this declaration relates is in conformity with thefollowing standard(s) or other normative document(s)following the provisions of the Low Voltage Directive 73/23/EEC,93/68/EEC and the EMC Directive 89/336/EEC.KOREA / September. 09, 2005 BYUNG SUHN, AHN(Place and date of issue) (Name and signature of authorized person)DECLARATION OF CONFORMITYKind of equipment : LCD MONITORType-Designation : L17A00000 / L19A00000Safety : EN60950-1:2002EMC : EN 55013:2001+A1:2003EN 55020 :2002+A1:2003EN 55022 :1998+A1:2000+A2:2003 EN 55024 :1998+A1:2001+A2:2003EN 61000-3-2:2000EN 61000-3-3:1995+A1:2001Accredited testlaboratory:TÜV RheinlandAm Grauen Stein51105 Köln
L17T/L19TTFT LCD Color Multi Function MonitorContents 1. Introduction ...................................1/352. Safety Information ........................1/353. Installing the monitor ...................4/353-1. Packing List .........................................4/353-2. Selecting a suitable location ..............5/353-3. Connecting the monitor .....................5/353-4. Connecting the TV ..............................5/353-5. Setting the refresh rate ......................8/35Preset Timing Table ............................9/353-6. User’s Environment ...........................10/354. Adjusting the picture(Monitor) .12/354-1. Using the On Screen Display ...........13/354-2. Direct access buttons .......................13/354-3. OSD Adjustments .............................14/355. Adjusting the picture(TV) ...........17/355-1. Direct access buttons .......................17/355-2. OSD Adjustments .............................18/356. TV Functions ................................21/357. Display power management ......29/35Reducing power consumption ..............29/358. Troubleshooting ..........................31/359. Specifications ..............................34/35
L17T/L19TTFT LCD Color Multi Function Monitor1. Introduction2. Safety Information1/35This manual contains instructions for installing and operatingHyundai ImageQuest L17T/L19T.Hyundai ImageQuest L17T/L19T is a highly ergonomic color display unit.• 17"/19” viewable SXGA LCD• High quality screen re-scaling capability• 100-240V AC input voltage, DC 12V 3.5A Adapter• VESA DPMS (Display Power Management Signaling)• VESA DDC1/2B compatibility• Advanced digital On-Screen-Display controls• Fast and accurate auto adjustment • Most advanced image scaling• Supporting VESA Flat Panel Monitor Physical Mounting InterfaceThis Monitor has been engineered and manufactured to assure your safety. You can prevent serious electrical shock and other hazards by keeping in mind the following:Do not place anything wet on the monitor or the powercord. Never cover the ventilation openings with anymaterial or touch them with metallic or inflammable materials.
L17T/L19TTFT LCD Color Multi Function Monitor2/35Avoid operating the monitor in extreme heat, humidity or areas affected by dust. Temperature : 5~35°CHumidity : 30~80RH Be sure to turn the monitor off before plugging thepower cord into the socket. Make sure that the powercord and the other cords are securely and rightlyconnected.Overloaded AC outlets and extension cords are dangerous, as are frayed power cords and broken plugs, which may cause electric shock or fire. Call your service technician for replacement.Do not use sharp tools such as a pin or a pencil near the monitor, as they may scratch the LCD surface.Do not use any solvent, such as benzene, to clean the monitor, as it will damage the LCD surface.
L17T/L19TTFT LCD Color Multi Function MonitorCleaning and Maintenance• To avoid risk from electric shock, do not disassemble the cabinet of the unit.The unit is not user-serviceable. Remember to unplug the unit from the poweroutlet before cleaning.• Do not use alcohol (methyl, ethyl or isopropyl) or any strong dissolvent. Do notuse thinner or benzene, abrasive cleaners or compressed air.• Do not wipe the screen with sponge/cloth that could scratch the surface.• To clean your antistatic screen, use water and special microfiber-screen-cleaning tissue-used in optical lens cleaning, or a lightly dampened piece ofsoft, clean cloth with water or mild detergent.• If the instructions above do not help in removing stains, contact an authorizedservice agent. 3/35
L17T/L19TTFT LCD Color Multi Function Monitor4/35The following items should be found in the package.The power cord above can be changed upon different voltage areas. Pleasecontact your dealer if anything is missing or damaged.Other power cord’s except the original packed in the product especially cardslonger than 3m may affect EMC of the product in operating condition.3. Installing the monitor3-1. Packing List!UKAmerica/CanadaJapanAustraliaKoreaEuropeSouth Africa1203475869MUTEP-CH EDIT PRE,P – CHPCS-VIDEOVIDEOTVSOURCEINFOAIR/CABLESEARCHVOLEXIT P-CHANNELAUTOBRIGHTNESSCONTRASTPOWERTTX/MIX LIST/FLOFSTOREHOLDSIZEREVEALSUB PAGEINDEXMENUPower CordSignal CableAudio Cable Compact DiscRemote Conrtol wuthBatteries(AAA x 2) InstallationGuideAC/DC Poweradapter
L17T/L19TTFT LCD Color Multi Function Monitor5/353-2. Selecting a suitablelocation3-3. Connecting the monitor• Place the monitor at least 30cm from other electrical or heat-emittingequipment and allow at least 10cm on each side for ventilation.• Place the monitor in a position where no light shines directly onto or isreflected on the screen.• To reduce eye strain, avoid installing the display unit against a brightbackground such as a window.• Position the monitor so that the top of the screen is no higher than the eye level.• Position the monitor directly in front of you at a comfortable reading distance(around 45 to 90cm) Before you start cabling your monitor, check that thepower is off on all units. To avoid any possibility ofelectric shock, always connect your equipment toproperly earthed outlets.1. Insert the other 15-pin signal cable connector into the 15-pin VGA connectionon your computer and screw it.2. Plug the power cord connection to the connection on the monitor.3. Plug the other end of the power cord to your computer's main supply or to a100V-240V earthed electrical outlet.4. Turn on the monitor using the power switch and check that the power LED ison. If not, repeat steps 1,2,3 and 4 or refer to the Troubleshooting section ofthis guide.5. Turn on the power of the computer. The picture will appear within about 10seconds. Adjust the picture to obtain optimum picture quality. See sectionAdjusting the picture in this guide for more information.!!
L17T/L19TTFT LCD Color Multi Function Monitor6/353-4. Connecting the monitor- Connecting External A/V Devices• Connect RCA (Yellow) or S-Video cables to an appropriate external A/V devicesuch as VCR, DVD or Camcorder.• Connect RCA audio cables to “Audio (R)” and “Audio (L)” terminals and the otherends to corresponding audio out terminals on the A/V device.- Connecting TV/CATV• Connect an antenna or CATV cable to the antenna terminal on the back of themonitor.ANTENNAAUDIOVIDEOS-VIDEOD-SUBDC 12 VRCA VIDEO Yellow-CableS-VIDEO Cable (Option)RCA(Left) AUDIO White-CableRCA(Right) AUDIO Red-Cable
SpeakerL17T/L19TTFT LCD Color Multi Function Monitor• Audio system7/35!!This monitor has an audio system including two micro loudspeakers. Each of twomicro loudspeakers has an 2Wrms (typ.) output power. This system also supports aheadphone output jack.This system has been tuned to get a best tone quality which an audio inputlevel is under 300mVrms. if the input level is more than 600mVp-p, you musttune down the audio input as the audio output tone may be distorted.When the monitor is turned on, audio is always set up as off mode. Please useAUDIO direct access button on the front cover or On Screen Display to putaudio on.
L17T/L19TTFT LCD Color Multi Function Monitor8/353-5. Setting the refreshrate Follow the instructions below to set your refresh rate in Windows 98/ME/XP/2000.1. Go to the configuration window(Start-Settings-Configuration window).2. Double click on the ‘Display’ icon.3. Click on the ‘Settings’ tab.4. Click on the ‘Advanced’ button.5. Click on ‘Adapter’ and select 60Hz from the list.6. Click on ‘Apply’ to accept the selected value.Power SwitchLED Indicator
L17T/L19TTFT LCD Color Multi Function MonitorPreset Timing TableIf the signal from the system doesn't equal to the preset timing mode, adjustthe mode with reference to the user guide of videocard because the screenmay not be displayed.The recommended setting is a resolution of 1280x1024 and a refresh rate of 60Hz.9/35!No.1234567891011121314Resolution720 x 400640 x 480640 x 480 800 x 600800 x 600800 x 600800 x 600832 x 6241024 x 7681024 x 7681024 x 7681152 x 8641280 x 10241280 x 1024Horizontal Frequency31.5 KHz31.5 KHz37.5 KHz35.2 KHz37.9 KHz48.1 KHz46.9 KHz49.7 KHz48.4 KHz56.5 KHz60.0 KHz67.5 KHz63.9 KHz80.0 KHzRefresh rate70 Hz60 Hz75 Hz56 Hz60 Hz72 Hz75 Hz75 Hz60 Hz70 Hz75 Hz75 Hz60 Hz75 Hz
L17T/L19TTFT LCD Color Multi Function Monitor3-6. User’s EnvironmentKensington Security(Locking) SlotRecommended Ergonomic User’s Environment• Viewing angle of the monitor should be between 0~20 degree.• This display unit supports a Kensington-type security device to secure yourmonitor. Kensington lock is not included.• To purchase and install the Kensington locking device, please refer to thefollowing contact information.* Kensington Technology Group· Address : 2000 Alameda de las Pulgas 2F san mateo, California 94403-1289· Tel : +1 650 572 2700 · Fax : +1 650 572 9675 · Web-site : www.kensington.com10/3520oKensington security slot
L17T/L19TTFT LCD Color Multi Function MonitorVESA MOUNT’G• This unit supports VESA FPMPMI standard for 75mmx75mm screw mounting bygiving 4 screw holes inside the base stand of the unit.• For buying VESA Flat Panel Monitor Mounting Devices, please contact thefollowing .Only M4 x10 size screw must be used for proper mounting.(Using wrong size screw may cause damages to the device)* Ergotron, Inc.· Address : Ergotron Europe Kuiperbergweg 50 1101 AG Amsterdam The Netherlands· Tel : +3 1 20 696 60 65 · Fax : +3 1 20 609 04 59 · E-mail : info.eu@ergotron.com11/35Desk MountWall Mount!
L17T/L19TTFT LCD Color Multi Function Monitor4. Adjusting the picture12/35You can adjust the screen display by using the buttons located below thescreen.1280X1024V:60.0/H:63.9
L17T/L19TTFT LCD Color Multi Function Monitor13/351. Push the MENU button to call the OSD to the screen. The resolution andfrequency are displayed at the top of the menu box for your information.2. Push the or button to choose the item you want to adjust. The selecteditem is highlighted.3. Push the SELECT button to adjust the highlighted item. 4. Use the or button to adjust the selection.5. Push the MENU button to return to the previous menu if you are in a submenu.6. The display unit automatically saves the new settings in 1 second after yourlast adjustments and the menu disappears. You can also push the MENU buttonto make the menu disappear.AUTO ADJUSTAt first, a full screen such as Window's back ground will be displayed.Push the SELECT(AUTO) button to adjust the shape of the screenautomatically.VOLUMEUse the VOLUME button to select the volume adjustment.Adjust with or button.4-1. Using the On ScreenDisplay 4-2. Direct access buttons
L17T/L19TTFT LCD Color Multi Function Monitor14/354-3. OSD AdjustmentsThe OSD adjustments available to you are listed below.BRIGHTNESSAdjusts the brightness of the screen.CONTRASTAdjusts the contrast of the screen.COLOR CONTROLColor temperature affects the tint of the image. With lower color temperatures the image turns reddish and with higher temperatures bluish.There are three color settings available: BLUISH, REDDISH or USER.With the USER setting you can set individual values for red, greenand blue.MISCELLANEOUSRECALL Recall the saved color data.OSD TIMERYou can set the displayed time of OSD Menu window on the screen byusing this adjustment.
L17T/L19TTFT LCD Color Multi Function Monitor15/35OSD POSITIONAdjust the OSD menu's horizontal or vertical position on the screen.AUTO COLOROptimum color setting is auto programmed for user’s convenience.AUDIOVOLUMEAdjust the audio volume level.SOUND OFFThis menu is used to choose audio on / off.TREBLEEmphasize high frequency audio.BASEEmphasize low frequency audio.AUTO ADJUSTYou can adjust the shape of the screen automatically at the full screenpattern.LANGUAGEYou can select the language in which adjustment menus are displayed.The following languages are available : English, French, German, Italian,Spanish, Swedish, Finnish, Danish, Portuguese, Dutch (Option Russia,Korean, Japanese, chinese)
L17T/L19TTFT LCD Color Multi Function MonitorH/V. POSITIONH POSITIONAdjust the horizontal position of the entire screen image.V POSITIONAdjust the vertical position of the entire screen image.CLOCK PHASEPHASEAdjust the noise of the screen image.CLOCKAdjust the horizontal size of the entire screen image.SOURCENo function. (Only supportable by the optional appliance.)16/35
L17T/L19TTFT LCD Color Multi Function Monitor5. Adjusting the picture(TV)5-1. Direct access buttonsUse this button to change the video sourceVideo sources are changed in the following order :PC → S-VIDEO → VIDEO → TVUse this button to select the volume adjustment.Then, adjust with the Up or Down button.Open the On-Screen-Display and select the highlighted function.17/35POWER SWITCHLED INDICATOR/Receive window forRemote controller
L17T/L19TTFT LCD Color Multi Function Monitor5-2. OSD AdjustmentsSelect a function on the OSD.Moves the selector right or left on the OSD.Increases or decreases the values of the selected function.Increases or decreases the channel number.The OSD adjustments are listed below.BRIGHTNESSAdjust the brightness of the screen.CONTRASTAdjust the contrast of the screen.IMAGE ADJUST SATURATIONAdjust the color saturation of the video image.TINTAdjust the color Tint of the video image.SHARPNESSAdjust the sharpness and softness of the video image.18/35
L17T/L19TTFT LCD Color Multi Function MonitorMISCELLANEOUSRECALLRecall the saved color data.OSD TIMERYou can set the time. The OSD Menu window will be displayed on the screen by using this adjustment.OSD POSITIONAdjusts the OSD menu's horizontal or vertical position on the screen.L19T TTX LANGUAGE(OPTION) AUDIOVOLUMEAdjusts the audio volume level.SOUND OFFThis menu is used to turn the choose audio on /off.TREBLEEmphasizes high frequency audio.BASEEmphasizes low frequency audio.LANGUAGEYou can select the language in which adjustment menus are displayed.The following languages are available : English, French, German, Italian,Spanish, Swedish, Finnish, Danish, Portuguese and Dutch.19/35
L17T/L19TTFT LCD Color Multi Function MonitorSOURCEThis menu is used to choose the desired input signal source.There are four signal sources available :- Analog RGB : 15 pin D-sub, Analog signal- S-video : MINI DIN, Separate video signal- Composite Video : RCA Jack, Composite video signal- TV : Antenna or CATV signalTVCH SEARCHINGThis Function is to scan the broadcasting channels in your location.PR(CH) EDITYou can change the channel or PR No with this function. CH FINE TUNETo make the video image as clear as possible.TV INPUTSelect a channel system : Air or Cable.20/35
L17T/L19TTFT LCD Color Multi Function Monitor6. TV Functions21/351 203475869MUTEP-CH EDIT PRE,P – CHPC S-VIDEO VIDEO TVSOURCE INFO AIR/CABLE SEARCHVOL EXIT P-CHANNELAUTO BRIGHTNESS CONTRASTPOWERTTX/MIX LIST/FLOF STORE HOLDSIZE REVEAL SUB PAGE INDEXMENU1. POWER ON/OFF2. PROGRAM EDIT3. S-VIDEO MODE4. PC MODE5. SELECT INPUT SIGNALS; PC,S-VIDEO, VIDEO, TV6. DISPLAY CURRENT STATUS7. MOVE LEFT/RIGHTVOLUME UP/DOWN8. DISPLAY OSD MENU ON SCREEN9. VOLUME UP/DOWN10. AUTO ADJUSTMENT (IN PC MODE)11. ADJUST THE BRIGHTNESS12. SOUND ON/OFF13. NUMERIC KEYPADS (CHANNEL ACCESSIN TV MODE) 14. PREVIOUS PROGRAM15. VIDEO MODE16. TV MODE17. CHANNEL SEARCH18. TV INPUT SELECT19. MOVE UP/DOWNPROGRAM UP/DOWN TELETEXT PAGE UP/DOWN20. PROGRAM UP/DOWN21. TURN OFF THE OSD22. ADJUST THE CONTRAST23. BUTTON FOR TELETEXT(OPTION)
L17T/L19TTFT LCD Color Multi Function Monitor• Channel Search - PAL• Auto PrIn order to watch TV, Multimedia Kit shall be installed to your monitor. Following instructions are based on using remote controller, and MENU(↵) buttonin remote controller is compatible with SELECT button of the monitor.You can scan for the frequency ranges available in your country.1. Press the MENU(↵) button and select TV icon.2. Select CH SEARCHING and you can see country list. 3. Choose your country by +/- key, then press MENU(↵) button to go to PRSEARCHING. If your country is not listed, contact the distributors or servicerepresentatives. This function is to search the channels automatically. Select AUTO PR and press MENU(↵) button for automatic channel search. Scanned channels are automatically allocated to each PR No.22/33BACKNEXTGER EST DEN SWE FINESP+FRAFRAITAGBRAUSNZLRUSIRLCHNUSA KORJPN
L17T/L19TTFT LCD Color Multi Function Monitor• MANUAL PR •PR EDIT(PROGRAMME EDIT) This function is to store the channels manually. a. Select MANUAL PR. b. Select TV CH by +/- buttons, then press MENU(↵) button.You can see at channel number. c. Change the channel by +/- buttons or numeric buttons, andpress EXIT. d. If you choose CH FINE TUNE and press MENU(↵), you cansee at the number. e. You can tune the TV screen by +/- buttons, then press EXIT. f. If you select PR and press MENU(↵), you can change the PRnumber by +/- buttons. Then press EXIT. g. You can save or delete above changes by selectingSTORAGE or DEL button by pressing MENU(↵) button. When storage or delete is finished, you can see YES in the menu, then press EXIT. The PR EDIT allows you to change the program numbers of stored channels.23/35
L17T/L19TTFT LCD Color Multi Function Monitor1. Press the MENU(↵)button and select TV icon.2. Select PR EDIT and press MENU(↵)button, then you can see the current PR list. *If you want to move to other pages, move the cursor PAGE +/- and pressMENU(↵)button. Then you can move to the other page by pressing +/- button3. Move the cursor to the PR number you want to change, then press MENU(↵)to go to the sub menu.4. Select TV CH, then press MENU(↵)button. You can see at the channelnumbers. 5. Change the channel by +/- buttons or numeric buttons, and press EXIT. 6. If you choose CH FINE TUNE and press MENU(↵), you can see at thenumber. 7. You can tune the TV screen by +/- buttons, then press EXIT.8. You can save or delete these changes by selecting STORAGE or DEL button bypressing MENU(↵)button. When storage or delete is finished, you can see YES in the menu, press EXITto go back to the previous menu. 24/35
L17T/L19TTFT LCD Color Multi Function Monitor• L19T Only TELETEXT (Optional)• Other Functions You can display teletext information from TV channels.– Displaying teletext information 1. Press TTX/MIX button to display teletext mode. 2. To see the actual broadcast simultaneously with the teletext page, press TTX/MIXbutton again.3. Press TTX/MIX button again to exit from the teletext mode. *If you press MENU(↵) when you watch teletext information, you can go back tothe top page. 1. HOLD :If the selected page is linked with several secondary pages, the secondary pagesare displayed in sequence. To freeze the display on a given page, press HOLD button.When this button is pressed, the stop symbol is displayed at the top left corner ofthe screen and the automatic page change will be inhibited. If you press HOLD button again, the automatic change resumes. 2. REVEAL :To see the hidden text (answers like quiz games), press REVEAL button. 3. LIST/FLOF :To select between LIST mode and FLOF mode. 25/35
L17T/L19TTFT LCD Color Multi Function Monitor4. FLOF mode :In FLOF mode, press the colored button corresponding to the topic that you wish toselect. (The available topics are listed on the status information line) the pagedisplayed with additional color-coded information that can be selected in the sameway. a) RED button : If you want to go to the previous page, press RED button. b) Green button : If you wan to go to the next page, press GREEN button. 5. STORE :In LIST mode, you can store teletext pages with following step. a. Select LIST mode, and you can see four 3-digit numbers are displayed in differentcolors at the bottom of the screen. b. Press the colored button corresponding to the page that should be replaced. c. Enter the new page number using numeric buttons. d. Repeat steps b. c. for each page to be stored, using a different colored buttoneach time. e. Press STORE button until the corresponding blocks blink. 6. SIZE :Press SIZE button once, the letter size of upper half of the screen will be doubled. Press SIZE button twice, the letter size of lower half of the screen will be doubled. Press SIZE button three times, the letter size gets normal. 7. SUB PAGE :If there are secondary pages in current teletext information, you can go tosecondary pages by pressing SUB PAGE and enter its 4-digit number. 26/35
L17T/L19TTFT LCD Color Multi Function Monitor• Channel Search - NTSC TV INPUTFirst of all, you can select the Air or Cable before setup the Channel Searching. 1. Press the MENU(↵) button and select TV icon. 2. Move cursor to TV INPUT using the +/- buttons.3. Press the MENU(↵) to Select TV INPUT, then select AIR or CABLE by using the +/-buttons.4. Press the EXIT button to go back to the previous menu.You can scan for the frequency ranges available in your country.27/35
L17T/L19TTFT LCD Color Multi Function Monitor• Channel Edit• Channel Fine Tune1. Press the MENU(↵) button and select TV icon.2. Select CH SEARCHING and you can see country list. 3. Choose your country by +/- key, then press MENU(↵) button to go to CHSEARCHING. If your country is not listed, contact the distributors or servicerepresentatives. . Select CH EDIT by +/- buttons, then press MENU(↵) button. You can save or deleteabove changes by selecting DEL or ADD button by pressing MENU(↵) button. 2. If you choose CH FINE TUNE and press MENU(↵), you can see at thenumber. 3. You can tune the TV screen by +/- buttons, then press EXIT.1. Select CH FINE TUNE by +/- buttons, then press MENU(↵) button. You can adjustCH FINE TUNE value by +/- buttons.2. Press the EXIT button to go back to the previous menu.28/35
L17T/L19TTFT LCD Color Multi Function MonitorIf the power management function of your computer is enabled, your monitorturns on/off automatically. You can control power management features from yourcomputer.Your computer may have power management features which enable the computeror monitor to enter a power saving mode when the system is idle. You canreactivate the system by pressing any key or moving the mouse.The power button does not disconnect the monitor from the mains. The onlyway to isolate the monitor completely from the mains supply is to unplug themains cable.29/357. Display power managementReducing powerconsumptionPower consumption40 WL17T : 3.5 W L19T : 5 W 0 WModeNormaloffUnpluggedLEDGreenOrangeNot illuminated!
L17T/L19TTFT LCD Color Multi Function Monitor8. Troubleshooting(TV)If this product is not functioning properly, you may be able to solve the problem byby the following below ;30/35ProblemColor defectsNo channelsearchingBlue screen/No signalThe remote controldoes not work.Possible solutionIf the screen color is not suitable for viewing.You can select “Recall” button in the OSD menu.This function returns to the initial factor setting values. (Page 4)If it could not find channels please check it again according to thefollowing steps.• The cable connection must be secure.• TV input (Air/CATV)• Country selection must be correct.You should select the appropriate country to your location.(PAL : Page 22, NTSC : Page 27)If the screen shows only blue color or No signal message, Pleasecheck whether you have selected the right signal source.-Analog RGB, S-video, Composite-video, TV (page 6)If the remote control does not operate well.Please check the batteries.• Batteries are correctly inserted according to and marking.• Batteries must be replaced if dead.
L17T/L19TTFT LCD Color Multi Function Monitor6. Troubleshooting(Monitor)31/35ProblemBlank screenError message:Video mode notsupportedThe display does not enter power managementmodePossible solutionIf the power LED is not lit, push the Soft power switch or check theAC cord to turn the monitor on. If the unit is powered through thecomputer, check that the computer is switched on.The unit might be in standby mode. Push one of the keyboard keys.Check that the keyboard is properly connected to the computer.Check that the signal cable connector is properly connected and thatthe connection pins are not bent or damaged. If the connector isloose, tighten the connector's screws.Check that the power cable is correctly connected to the unit and tothe power outlet. Check the resolution and the frequency on the video port of yourcomputer.Compare these values with the data in the Preset Timing Table.The video signal from the computer does not comply with VESADPMS standard. Either the computer or the graphics adapter is notusing the VESA DPMS power management function.If this product is not functioning properly, you may be able to solve the problem byby the following below ;
L17T/L19TTFT LCD Color Multi Function Monitor32/35Possible solutionCheck that the signal cable connector is properly connected and thatthe connection pins are not bent or damaged. Try another colortemperature. Adjust the picture characteristics as described in the section OSDAdjustment(4-3).A problem with your graphics adapter or display unit. Contact yourservice representative.Check that the resolution and frequency from your PC or graphicadapter is an available mode for your monitor.In your PC, you can check through Control panel, Display, Settings.If the setting is not correct, use your computer utility program tochange the display settings.Check that the signal cabel connector is properly connected and thatthe connection pins are not bent or damaged.If the connector is loose, tighten the connector’s screws.Check that the computer is switched on.To enter a power saving mode. You can reactivate the system bypressing any key or moving the mouse.ProblemColor defectsSize, position,shape or qualityunsatisfactoryDuplicatedimagesImage is notstableMessage : No signalThe power LED isa orange color
Possible solutionLED Indicator can be orange color on changing of video mode orInput Signal.Check the resolution and the frequency on the video part of yourcomputer. Compare these values with the data in the Preset TimingTable.ProblemThe power LED isa orange colorL17T/L19TTFT LCD Color Multi Function Monitor33/35Contacting serviceIf the above troubleshooting hints do not help you find a solution to the problem,contact an authorized service agent. If the monitor is sent for service, use theoriginal package if possible.Unplug the unit from the power outlet and contact a service agent when:• The monitor does not operate normally according to the operating instructions.• The monitor exhibits a distinct change in performance.• The monitor has been dropped or the cabinet has been damaged.• The monitor has been exposed to rain, or water or liquid has been spilled ontothe monitor.
L17T/L19TTFT LCD Color Multi Function Monitor34/3517"viewable, Diagonal, A-Si TFT0.264 x 0.264mm337.920 x 270.336 mm16.2MilHorizontal : 31.0 to 80.0KHz, Vertical : 56 to 75Hz135 MHz1280 x 1024@75Hz 1280 x 1024@60HzDC 12V 3.5A40WVESA DPMSVESA DDC 1/2BMONITOR : BRIGHTNESS, CONTRAST, COLOR CONTROL,MISCELLANEOUS, AUDIO, AUTO ADJUST, LANGUAGE,H/V. POSITION, CLOCK-PHASE, SOURCETV : BRIGHTNESS, CONTRAST, IMAGE ADJUST,MISCELLANEOUS, AUDIO, LANGUAGE, SOURCE, TV2ch x 2watts75 x 75 mm screw mountingTCOFCC Class B, CE, cTÜVus, TÜV-GS5 ~ 35O C4.5Kg unpacked, 6.0Kg packed372 X 395 X 185 mmLCDPixel pitchDisplay areaNumber of colorFrequency rateMaximum bandwidthMaximum resolutionRecommanded resolutionInput voltagePower consumptionPower managementPlug & PlayOSD menuBuilt in SpeakerVESA FPMPMIErgonomics,Safety and EMCOperating TemperatureWeightDimensions (W X H X D mm)• Specification is subject to change without notice for performance improvement.9. Specifications• L17T
L17T/L19TTFT LCD Color Multi Function Monitor• L19T35/3519"viewable, Diagonal, A-Si TFT0.294 x 0.294mm376.32 x 301.056 mm16.7MilHorizontal : 31.0 to 80.0KHz, Vertical : 56 to 75Hz135 MHz1280 x 1024@75Hz 1280 x 1024@60HzDC 12V 3.5A40WVESA DPMSVESA DDC 1/2BMONITOR : BRIGHTNESS, CONTRAST, COLOR CONTROL,MISCELLANEOUS, AUDIO, AUTO ADJUST, LANGUAGE,H/V. POSITION, CLOCK-PHASE, SOURCETV : BRIGHTNESS, CONTRAST, IMAGE ADJUST,MISCELLANEOUS, AUDIO, LANGUAGE, SOURCE, TV2ch x 2watts75 x 75 mm screw mountingTCOFCC Class B, CE, cTÜVus, TÜV-GS5 ~ 35O C4.9Kg unpacked, 6.8Kg packed420 X 441 X 185 mmLCDPixel pitchDisplay areaNumber of colorFrequency rateMaximum bandwidthMaximum resolutionRecommanded resolutionInput voltagePower consumptionPower managementPlug & PlayOSD menuBuilt in SpeakerVESA FPMPMIErgonomics,Safety and EMCOperating TemperatureWeightDimensions (W X H X D mm)• Specification is subject to change without notice for performance improvement.

Navigation menu