Hyun Won DAH220 MP3 PLAYER (WITH FM RADIO) User Manual EMISSION TEST REPORT

Hyun Won Inc. MP3 PLAYER (WITH FM RADIO) EMISSION TEST REPORT

USERS MANUAL

Test Report No.: GETEC-E3-03-030 FCC Class B Certification APPENDIX H : USER’S MANUAL EUT Type: MP3 Player FCC ID : PCMDAH220
USER S MANUALDAH-220MP3&WMA PlaybackFM Radio
Welcome To The DAH-220 ExperienceDAH-220 HARDWARE OVERVIEWSoftware CD ContentsSOFTWARE INSTALLATIONCONNECTING THE PLAYERTO A PC USING A USB CABLEFILE DOWNLOAD/UPLOADUSB CABLE SEPARATIONFORMATTINGOPERATING THE DAH-220 (Stand-alone with headphones)Inserting the DAH-220 into a Cassette DeckDAH-220 Cassette DECK OperationVoice recording, music recording FunctionHANDLING AND STORING INSTRUCTIONSBATTERY AND CHARGER(AC AND DC CHARGER) USAGETROUBLESHOOTING PROBLEMSINSTALLING THE USB DRIVERRemote controller functionWARRANTY SERVICEwarranty from246791112131415161719202123242627CONTENTS 1
The following components are included with your DAH-220 :A. AC Battery ChargerB. DC Battery Charger (Option)C. DC line-in Cable(Option)D. Ni-MH Rechargeable BatteriesE. Software CDF. USB Connection CableG. Carrying CaseH. EarphonesI. Owner's ManualJ. Digital Encoding Cable(option)K. LCD Remote Controller(option)Note : Accessories and optional items are subject to change. Please checkhttp://www.mobiBLU.com for the latest in DAH-220 accessories andsoftware upgrades.INCLUDED WITH YOUR DAH-220 The following PC specifications are required for DAH-220 compatibility:Microsoft Windows 98, ME, 2000, or XPMacintosh OS 9.x -- iTunes 1.1 and higherCD-ROM Drive with digital audio extraction supportPentium (or compatible) 200MHz or higher processor32MB RAM (64MB for Windows®ME or 2000) or greater32MB free Hard Disk Space (more for digital audio file storage)Sound cardUSB port capabilityPC SYSTEM REQUIREMENTS3Congratulations on your purchase of the DAH-220 portable digital player - the only player on themarket specifically designed to play digital music on any standard analog cassette deck with highfidelity sound and without the need for cumbersome and inconvenient wired adapters. The DAH-220contains 64 / 128 / 256MB of on-board memory that is easily expandable to 96/ 128 /160 / 192 /320MB or more via the MultiMedia Card (MMC) slot. The DAH-220 was designed with aprogrammable, upgradeable Digital Signal Processor (DSP) to support new audio formats and digitalrights management systems. Please check the Hyun Won Inc. website at http://www.m-any.com forthe latest software upgrades and accessories. You are now ready to enjoy the world of digital audiowith the most versatile digital audio player on the market today.WELCOME TO THE DAH-220 EXPERIENCE 2
Removable Memory Card The DAH-220 is compatible with MultiMediaCardTM(MMC) (soldseparately), which enables your DAH-220 to expand its memorycapacity and store more audio content. When inserting or removing aMMC card, make sure the DAH-220 is OFF or the memory card maybe damaged. MultiMedia Cards are inserted completely into the unitwith the gold contacts facing downward and positioned facing the backof the player.Note :When an MMC card is not used, the MMC cover that comes with the unit must be used and fullyinserted into the player to prevent damage to the internal MMC slot.If there is an error reading the MMC card (such as error code 4), briefly remove the MMC card, checkthat it is oriented properly (gold contacts facing the back of the player and down) and then re-insert itinto the player while the player is still connected to the PC.DAH-220 HARDWARE OVERVIEW 5Front PanelG. Volume + Button : Press once to increase Play Volume one step. H. Volume - Button : Press once to decrease Play Volume one step. I. Play/ EQ Setting Button : Power ON, Press to start Play. Press again to change EQ setting when playing.J. LED Indicator : When LED is flashing green, this indicates song is playing. Red LED indicates initial booting orUSB communication or when ADP file is playing. K. Rew Button : Press to select previous file or Search. L. F.F. Button : Press to select next file or Search.M. Stop/Bookmark Button : Power OFF, Press to Stop, Pause Play/Bookmark or Power Save Mode.N. Head Control : Slide control to adjust tape head alignment for optimal sound quality and compatibility in cassettedecks.J. LED IndicatorK. Rew ButtonL. F.F. ButtonM. Stop/Bookmark/Pause Button PowerOFFG. Vol + ButtonH. Vol - ButtonI. Play/EQ SettingButton Power ONN. Head ControlFront PanelTop and Side PanelA. Battery Cover : Slide the cover on top of the unit away from the control buttons to open, and theninsert your rechargeable DAH-220 battery.B. Memory card slot : A removable MultiMedia Card (MMC) (Sold Separately)enables yourDAH-220 to expand its memory capacity and store more audio files. MMCmemory cards are inserted completely into the unit with the gold contactsfacing downward and positioned facing the back of the player.C. Slide Switch : Powers your DAH-220 On and Rec as well as enabling the Hold feature, whichdisables the on-board controls.D. Earphones Audio Output : Connects your earphones for stereo output.E. Remote Control / Direct Encoding Slot :Connects the remote control and enablesthe use of the direct encoding cable. F. USB Port Connector : Connects your DAH-220 to your computer for fast, efficient file transfersat speeds up to 2.5 Mbps.G. DC Line-in Connector : The DC charger and cable allow users to play DAH-220 when battery isdischarged.DAH-220 HARDWARE OVERVIEW 4A. Battery CoverG. DC Line-in ConnectorF. USB Port ConnectorD. Earphones Audio OutputE. Remote Control / Direct Encoding SlotC. Slide Switch(HOLD/REC/ON)B. Memory Card SlotYour DAH-220 has the following hardware features : Top and side panel
67Application Function M-any Loader Express Transfer digital audio files to/from DAH-220Windows Media Player Manage audio files and link to DAH-220*Audible Manager Download, playback of and transfer ofAudible.com content to DAH-220*** You can use Windows Media Player to transfer audio files to DAH-220. Note : When converting your personal audio CDs into WMA digital audio filesusing Windows Media Player, it is important to disable the PersonalRights Management System within Windows Media Player. This willallow you to transfer and play the WMA files on your DAH-220. Followthese instructions to disable the Personal Rights Management SystemBEFORE copying CDs to your computer:1. Open Windows Media Player, then click on Tools.2. In the menu that opens, click on Options.3. In the new window that opens click on the CD Audio tab.4. In the CD Audio tab, make sure the box next to "Enable Personal RightsManagement" is UNCHECKED.5. Click Apply at the bottom of the tab and then OK to exit the menu.6. You may now encode your personal audio CDs into WMA digital audiofiles and transfer them for playback on your DAH-220.** Requires latest version Audible Manager software downloaded viaincluded software CD and Internet download. Connect to the Internet,insert the Software CD, then select "Audible Manager" from the softwareinstallation menu.SOFTWARE CD CONTENTS SOFTWARE INSTALLATION1. When you insert the installation CD in the CD-ROM drive, the following screen appears. 2. When the following screen appears, select the folder you wish the program to be installed in and click [next] button. Click!Click!Click!Click!
SOFTWARE INSTALLATION3. Click [Finish] button to complete installation.Finish!Finish!4. When the following screen appears, click [OK] in order to reboot the system. OK!OK!CONNECTING THE PLAYERTO A PC USING A USB CABLE101. Connect one end of a USB cable to one of the USB ports on the back of the PC, and connect the other end to the player.The digital audio turns on when connect USB USB port.NotePlayerDATA In/Outport (USBPORT)USB cableBe careful with thedirection of insertion USB PORTnote: The LCD displays USB Connected Ready”2. The system will automatically install the required driver with a message saying it is searching for new device. In Windows XP, click as shown in the following picture.Click!Click! Click!Click!89
CONNECTING THE PLAYERTO A PC USING A USB CABLEIn order to assure smooth operation of the product, connect the USB cable directly to the USB port behind the PC. Connecting the USB cable to the frond-side USB port or through USB hub may cause connection problems.Using Player simultaneously with other USB peripheral devices such as a digital camera or a scanner may cause communication errors with its software, so please try not to use them together.NoteClick!Click! Click!Click!3. After installation is completed, the device information shows as follows. Please refer to “start -> setting -> control panel -> system -> device manager”FILE DOWNLOAD/UPLOAD1. Connect Player to the PC.2. Execute Windows Explorer. 3. Select the file you wish to download/upload, then store the file in the folder selected using “Copy -> Paste” or Drag & Drop.Note LCD display shows “WRITING” during file downloading. Unplugging the cable while still downloading/uploading may causemalfunction of the product.At one s discretion, don t amend or delete the file settings.dat from thememory as it is a system file.Maximum display file size is 256 characters.Caution10 11
USB CABLE SEPARATION2. Select the USB device to be separated, then select the [Stop] button.Click!Click!Click!Click!1. Before separating the USB cable from the PC, double click on the “Unplug or Eject Hardware” icon on the toolbar located at the bottom right of the Windows screen.Separating the USB cable from the PlayerAfter completing file transfer, please remove the USB cable using the following method:Dubble Click!Dubble Click!FORMATTING1. To format using Player program: After connecting the player to the PC using a USB cable, select and exeute “Hyunwon inc DAH900 Mp3 Player -> DAH900 Format” from “Start -> Programs”. Push the Start button to proceed. Be cautiousas all files will be deleted and cannot berestored after the formatting.2. To format using the Windows Explorer: After connecting the player to the PC using a USB cable, select the removable disk from the Explorer, then select the “Format” option by right-clicking.12 13
15OPERATING THE DAH-220 (Stand-alone with headphones)INSERTING THE DAH-220 INTO A CASSETTE DECKThe following is the correct way to insert the DAH-220 into a cassette deck.1. Initialize the DSP on the DAH-220 by moving the Slide Switch to the On position andthen press the Play button more than 2 seconds.2. Due to potential variances in the volume of encoded audio files, the cassette audio output of theDAH-220 is adjustable. When the unit is first turned on, the volume is set to a medium level ofoutput. You may adjust the output to a cassette deck by pressing Play (note that the indicator lampshould be flashing), then adjusting the volume either up (+) or down (-) to suit the desired output tothe cassette deck. Note : It is possible to adjust the output volume high enough to cause distortion during cassetteaudio playback on some cassette decks. Avoid distorted output by matching the volume ofthe DAH-220 playback with the FM tuner volume, such as on a car cassette deck.3. Insert the DAH-220 into the cassette deck, making sure the side marked Front (the side with theoperating buttons) is inserted upward or forward.4. You may adjust head control switch to ensure optimal tape head alignment. Typical indications ofimproper tape head alignment is audio playing only on one side, significantly reduced volume, orsignificant extraneous noise coming from player.5. If no sound is played from the cassette deck or if adjusting tape head control does not improveaudio quality significantly, change the play direction with the auto-reverse button (if applicable)and flip the DAH-220 cassette so it is facing down.14OPERATING THE DAH-220 (Stand-alone with headphones)OPERATING THE DAH-220 (Stand-alone with headphones)FOR EQUALIZER FUNCTIONS (while audio is playing)Desired Operation Buttons Function When PressedPower onPlay (hold Play for > 2 sec)Powers the player on.Power offStop (hold Stop for > 2 sec)Powers the player off.Play audio file Press Play Begins to play audio/Restarts frompause.Pause audio fileStop (press stop for < 1 sec)Pauses audio playback.Increase Volume Vol + Increases the audio Volume.Decrease Volume Vol - Decreases the audio Volume.Previous Track Rew Plays previous audio file.Next Track F.F. Plays next audio file.Rewind audioRew (hold Rew for > 2 sec)Rewinds audio at 4X speed aslong as the button is depressed.Fast Forward Audio F.F. (hold F.F. for > 2 sec)Advances audio at 4X speed aslong as the button is depressed.Key LockMove Slide Switch to the HOLD Locks the button functions whenpower is on.Desired OperationButtons Function When PressedChange Equalizer Play/EQToggles equalizer mode whileaudio Mode is playing. (Flat,Rock, Latin, Dance, Jazz)The DAH-220 functions can also be controlled by a remote control with an LCD display.(optionalitem)Pause/Power Save ModeThe DAH-220 features a Power Save mode that allows the player to automatically conserve itsbattery power when not in use. When the user presses the Stop button for more than 2 seconds,and/or if the player senses it is not used for 5 minutes, it will automatically enter Power Save mode.To resume play if the Slide Switch is left in the "On" position, press the Play button twice.Note : The DAH-220 will resume play from the exact point in the audio track that was playingwhen the stop button was pressed. The volume and EQ setting are also memorized. To deletethe previously set Bookmark press VOL+ and VOL- buttons simultaneously while SlideSwitch is in the "REC" position. position
17VOICE RECORDING, MUSIC RECORDING FUNCTIONRecording time1) Direct MP3 recording : about 120 minutes based on 128MB memory2) Voice Recording : 520 minutes based on 128MB memoryRecording format1) Direct MP3 recording : MP32) Voice recording : ADPCMRecorded files display1) Direct MP3 recording: E001.MPE, E002.MPE, etc2) Voice Recording: A001.ADP, A002.ADP, etcRecording is not possible in following cases1) Battery charge is not enough.2) The free memory is not enoughRecording stops automatically in following cases1) Battery gets discharged.2) Memory becomes full during recordingNOTE1) Recording can be done on on-board flash memory ONLY, not on MMCmemory2) All ADPCM and MP3 files can be deleted directly from the device. Please see instruction on page 20.16OPERATING THE DAH-220 (Stand-alone with headphones)DAH-220 CASSETTE DECK OPERATIONDesired OperationButtons Function When PressedPower onPlay (hold Play for > 2 sec)Powers the player on, enablingit to be inserted for use in acassette deck.Play MusicUse cassette deck Play controlBegins audio playback. Pause MusicUse cassette deck Pause controlPauses audio playback. Stop/BookmarkUse cassette deck Stop controlStops playback and thenbookmarks audio.Increase VolumeUse cassette deck Volume controlIncreases audio volume. Decrease VolumeUse cassette deck Volume controlDecreases audio volume. Next TrackPress cassette deck F.F. forSkips forward to the next less than 2 second and Playtrack.Previous TrackPress cassette deck Rew for Begins audio playback of less than 2 second and Playthe previous track.Rewind audioPress and hold Rew for Rewindsaudio at 4X speedmore than 2 second and Playas long as depressed.Fast Forward audioPress and hold F.F. forAdvances audio at 4X more than 2 second and Playspeed as long as button isdepressed.Power Save Mode in Cassette Deck PlaybackThe DAH-220 features a Power Save mode that allows the player to automatically conserve itsbattery power when not in use. When the player senses it is not use for 5 minutes, it enters a PowerSave mode. To resume play when in a cassette deck, eject the DAH-220 from the deck and press theplay button. Re-insert the DAH-220 into the deck and the unit will resume play from the exact pointin the audio track that it was last stopped. This will also occur if the battery is replaced during play. Note: The DAH-220 will resume play from the exact point in the audio track that was playing whenthe stop button was pressed. The volume and EQ setting are also memorized. To delete apreviously set Bookmark press the VOL+ and VOL- buttons simultaneously while the SlideSwitch is in the "REC" position. *Note: Results may vary in different cassette decks.
19HANDLING AND STORING INSTRUCTIONSThe DAH-220 was designed for everyday use with its aluminum casing and itssolid-state design provides for skip-free audio playback under most activesituations. Please note the following information when using the DAH-220 : Unit may be damaged if struck or crushed.Use a carrying case when carrying and using your DAH-220.Keep out of direct sunlight.Keep away from dust and dirt.Clean with a dry, soft cloth.Store in a cool dry place.Do not store your DAH-220 around a television set due to the magnetic field interference that may result with the TV.Do not squeeze the DAH-220 body. Excessive pressure on the body could causedamage to the internal parts and cause malfunctions.Do not touch or handle the tape simulator belt in the bottom of the unit, doing somay cause malfunctions when used in a cassette deck.Do not expose the DAH-220 to extreme temperatures, such as leaving it in a carin hot weather.Do not attempt to transfer a file onto the player that is larger than the listedavailable memory, doing so will damage the players operating system. **Recording/Direct Encoding results may vary18VOICE RECORDING, MUSIC RECORDING FUNCTION1. Voice Recording:a. Move the Slide switch to the REC position.b. Press the PLAY button for more than 2 seconds Voice Recording will be in progress while LED is flashing between redand green colors. c. Press the Stop button to stop recording.Then LED turns off and the recording is finished.2. Direct MP3 Recording:(Only for DAH-210M Model)a. Move the Slide switch to the REC position.b. Follow the next steps to record directly from a cassette deck.i. Insert the device into the double cassette deckii. Press the RECORD button on the cassette deck while the other cassetteis playing. iii. Press the STOP button of the cassette player to terminate therecording.3) Follow next steps for recording through encoding cable;c. Follow the next steps to record through the encoding cable: i. Connect the audio output port of a normal audio player and the earphoneport of the DAH-220 with the encoding cable.ii. Press the PLAY and FF buttons simultaneously for at least two seconds.iii. Recoding will be in progress while the LED is flashing red and greencolors.d. Press the STOP button of the DAH-220 to terminate the recording.The LED will turn off and the recording is finished.3. Replaya. Move the Slide switch to the ON position.b. Press the PLAY button4. Erasea. Press the STOP button while the selected file is playing.b. Move the Slide Switch to the REC position.c. Press the FF and REW button simultaneously for more than two seconds.d. The LED turns on then off in a green color to indicate that the selected filehas been deleted.
21TROUBLESHOOTING PROBLEMSThe DAH-220 will not download digital files from the PC.➪Verify that the unit is switched "On".➪Check to see if the battery is fully charged. ➪Check the cable connection to the USB port.➪Verify that the battery has been inserted correctly.The DAH-220 will not play.➪Verify that the unit is switched "On".➪Verify that the battery has been inserted correctly.➪Check to see if the battery is fully charged.➪Verify that the player is inserted correctly into the tape deck.➪If used in a cassette deck, check tape player direction (DAH-220 will only play properly in one tape direction).➪Verify that the MMC card is inserted properly, if applicable.The DAH-220 sound is not clear in a cassette deck, or sound comes only from the left orright speakers.➪Verify that the unit is on.➪Adjust the tape head control position for optimal alignment with the tape deck head.➪Reposition the DAH-220 with the front side down and press auto-reverse to playbottom side.The M-any Loader Express does NOT recognize the hardware connection.➪Verify that the unit is switched "On".➪Verify that the battery has been inserted correctly.➪Check to see if the battery is fully charged. ➪Check the cable connection to the USB port. ➪You may need to re-install the software.Note :Please disconnect the device from the PC, re-initialize the player by pressing the PLAYbutton for at least 2 seconds. After LED flickers in red color one time connect the devicewith a USB cable.1) If "No memory found" is shown again;- Check if the USB cable is connected to device and the PC properly.- Connect the USB cable to another USB port.- Check if there is "USB Flash Memory Controller Driver" in My computer -> ControlPanel -> System -> Device Manager.)20BATTERY AND CHARGER(AC AND DC CHARGER) USAGENote : 1. If the battery is not used for a week or longer, it may lose part or all of itscharge.2. If the battery is repeatedly recharged before being discharged completely, itstotal playing time may be reduced.3. If the battery playing time is significantly shorter than when you purchasedthe unit, you may need to purchase a new battery. 4. You may charge the battery for an additional 30 minutes after the chargelamp has turned off to ensure a full charge.
23INSTALLING THE USB DRIVERIf a USB driver to control the DAH-220 already exists on the PC, there is no need toinstall a new driver.Insert Software CD into CD-ROM Drive (Do not execute the installation program.)Connect the DAH-220 to PC with the USB cable.(If there is no USB driver tocommunicate between the DAH-220 and the PC, the"New Hardware Wizard" willappear on the screen.)Proceed the installation following the on-screen instructions.When the location of the drive is asked, select the folder of your CD-ROM. (When theinstallation finishes once, The New Hardware Wizard will appear on screen again.)Follow the on-screen instructions to complete the installation of the USB driver.Important Note:When connecting the cable with DAH-220, ensure the correct orientation of theconnector end, and do not force the connector. Improper connection with the USB cablecan cause damage to the computer and/or the DAH-220.22TROUBLESHOOTING PROBLEMSIf there is "!(or?) USB Driver" or "!(or?) Unknown Device", the USB drivermay not have installed correctly or is not properly recognized. In this case it isnecessary to reinstall the USB driver. To install of USB drivers, please refer to"The inability to get access to Memory" in the Help menu of the program.- If there are no contents related to USB in My computer -> Control Panel ->System-> Device Manager, you may have to check if your computer iscompatible with the USB driver.- Check if there is a conflict between hardware devices in My computer ->Control panel -> System -> Device Manager. (Hardware conflicts betweenhardware devices show a "!" or "?" mark in front of the device name.) If youcan find conflict between hardware, Delete the conflicted hardware and rebootcomputer.The DAH-220 does not respond to cassette deck controls (Play, FF and/orRew) when first used in a cassette deck.Rotate the DAH-220 cassette wheels manually using a finger in a clockwise andcounter clockwise motion 4~5 times. Re-insert the DAH-220 into the cassettedeck.Please visit the Hyun Won Inc. website at http://www.mobiBLU.com for thelatest updates and software upgrades for the DAH-220
25REMOTE CONTROLLER FUNCTIONMode ButtonPress the MODE button to scroll through a list of Play options.Normal, Repeat, RPT All(Repeat all), Random, RAN AL(Random all).Press the mode button for "two" seconds to scroll through a list of Equalizer options (Flat, Rock, Latin, Dance, Jazz, and User EQ)Section Repeat1. Press the REW/FF toggle switch in the middle (Push button inward) while song is playing, RPT A- will display onthe LCD2. Press the REW/FF toggle switch again in the middle, RPT A-B will display on the LCD and automaticallyselected section A-B will be played repeatedly3. To cancel this section repeat, press the REW/FF toggle switch once quickly"NOTE: this function is to hear a certain section of a file repeatedly"REC ButtonVoice Recording1. Press the REC button for "two" seconds, "Record" will display on LCD. (Must be in STOP mode for recording.)2. Press the REC button again, "Rec Start" and "V001.ADP" will display in the LCD, you can beginspeaking/recording.3. Press the STOP button to end recordingFile Erase1. Select the file you wish to Erase by searching with REW/FF button.2. Press the REC button for "two" seconds in Stop mode, "two" times, "Erase" will display on the LCD.3. Press the STOP button once quickly, the selected file will be erased and "succeed" will display on the LCD."Note: If you would like to delete the last file that was played, you can skip step number two."Delete SettingsPress the REC button for "two" seconds in Stop mode, "three" times, "Delete" will display on the LCD.Press the REC button one quickly, and then press the STOP button for "two" seconds to power off the unit.All values are initialized and returned to the default value.User EQ SettingsPress the REC button for "two" seconds in STOP mode "four" times (or in Play mode "one" time), User EQ willdisplay on the LCD.Press the REC button once quickly, Bass 1 will display on the LCD with a set value. Set the Value (-15 ~ +15 in eachBass) with the Vol+ / Vol- buttons.Move to Bass 2, Bass 3, Bass 4, and Bass 5 by moving the REW/FF toggle switch.Section Select"Function available with Audible content ONLY"(Http:www.audible.com)1. "A" will display on the LCD when an Audible file is playing.2. SEC Select will display on the LCD by pressing the REW/FF toggle switch for "two" seconds (while content isplaying)3. Press the REW/FF Toggle switch to navigate through the sections.Hold1. Slide the HOLD button to the right, a Key will display on the LCD - this will lock all of the buttons fromfunctioning.2. Slide the HOLD button to the Left and the Key will disappear from the LCD - All the buttons will function again.24REMOTE CONTROLLER FUNCTIONPLAY ButtonPress PLAY button for play music and will display file name on the LCD. Press PLAY button while play mode pause music and will display "Pause" on the LCD.Press the PLAY button for two seconds while contents is playing, playing time will display on the LCD. AndPress PLAY button for two seconds one more time, file name will display on the LCDSTOP ButtonPress the STOP button to stop musicPower Off : Press the STOP button for "two" seconds to turn off playerFF/REW ButtonMove the toggle switch to the FF or REW position and hold for at least 2 seconds. Contents will FF or REW at 4xregular speed until you release the switch.The content will REW/FF until the beginning/end of the file is reached at the beginning/end of the file, thefunction will stop and the content will begin playing at the beginning of the file/ next track The LCD timer will display your progress as you REW/FF through a track.Next / Previous TrackQuickly move and release the TOGGLE SWITCH to the FF or REW position content will skip to the nexttrack.This function can be preformed while in Play or Stop mode.Track numbers will change on the display while performing this function.Volume + / Volume -Press the Vol +/ Vol- button to increase/decrease the volumeVolume is increased/decreased one step at a time.There are 0-30 levels for the volumeThis function can be preformed in Play, Stop, and pause mode.LCD WINDOWVOLUME(0~30)TITLECODEC TYPEAUDIBLE READY FORMATPLAY MODENO. OF SONG PLAYING NO. OF TOTAL SONGSBATTERYEarphone JackVOL+VOL-STOPPLAY/PAUSE RECMODEREW/FF(TOGGLE SWITCH)LCD Window HOLD
WARRANTY FORMProduct Name :Model Name:Date of Purchase: (date) (month) (year)Customer’s Name: Phone :Address :Agent’s Name: Phone :Address :This Warranty Form with the date of purchase must be presented forwarranty service. Please keep this warranty form well.1. This product shall be entitled to warranty service as specified in the warranty form.2. As the warranty period begins on the date of purchase, please ask the agent to enterthe date of purchase in the warranty form when you purchased the product.(In case that it is impossible to confirm the date of purchase, the warranty period shall beconsidered to begin after six months from the date of manufacture.)3. This warranty form shall not be reissued.The specifications of the product are subject to changes without notice for thepurpose of quality improvement.One-year warrantyWARRANTY FROM 2726WARRANTY SERVICECustomers are entitled to warranty service for a period of one (1) year from thedate of purchase. Warranty service does not apply to defects resulting fromcustomer fault or acts of God.Non-warranty service shall apply to defects resulting from:1. Infiltration of foreign matter, such as water, liquid, or sand.2. Breakage due to dropping or severe impact.3. Damage to or deformation of the outer case caused by organic solvents, suchas benzene.4. Use of parts other than those certified by the manufacturer.5. Loss or breakage of any parts or components caused by unauthorizeddisassembly.6. Repair or modification done by any persons other than manufacturerauthorized personnel.7. Acts of God, such as lightning, storm or flood.SpecificationsCassette Tape Type Digital Audio Player- Size (WxHxD) : 100.4 63.8 12mm- Weight (w/o battery) : 55 g - Memory(on-board) : 64 / 128 / 256MB- Memory Expandable with MMC Card- Power Supply : 1.2V Rechargeable Ni-MH Battery- Earphone Output : 5 mW- S/N Ratio : 90 dB- Frequency Response : 20Hz ~ 20 KHz- PC Interface : USB Port- System Requirements OS: Windows 98, ME, 2000, or XP Macintosh OS 9.x and iTunes 1.x and higher
FCC RFINTERFERENCE STATEMENTNOTE :This equipment has been tested and found to comply with the limits for a Class Bdigital device, pursuant to Part 15 of the FCC Rules. These limits are designed toprovide reasonable protection against harmful interference in a residential installation.This equipment generates, uses and can radiate radio frequency energy and, if notinstalled and used in accordance with the instructions, may cause harmful interferenceto radio communications. However, there is no guarantee that interference will notoccur in a particular installation.If this equipment does cause harmful interference to radio or television receptionwhich can be determined by turning the equipment off and on, the user is encouragedto try to correct the interference by one or more of the following measures.- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected.- Consult the dealer or an experienced radio, TV technical for help.- Only shielded interface cable should be used.Finally, any changes or modifications to the equipment by the user not expresslyapproved by the grantee or manufacturer could void the users authority to operate suchequipment.THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION ISSUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOTCAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANYINTERFERENCE RECEIVED INCLUDING INTERFERENCE THAT MAY CAUSEUNDESIRED OPERATION.CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Navigation menu