Hyun Won DAH1200T MP3 PLAYER (WITH FM RADIO) User Manual User s Manual H

Hyun Won Inc. MP3 PLAYER (WITH FM RADIO) User s Manual H

USERS MANAUL

EUT Type: MP3 Player FCC ID : PCMDAH1200T Test Report No.: GETEC-E3-04-010 FCC Class B Certification APPENDIX H : USER’S MANUAL
Technical Support Tel : (82) 54-338-6000(+4 ext.)E-mail : call@hyunwoninc.comhttp://www.hyunwon.comUSA & CanadaToll Free No. : 1-888-283-2580E-mail : support@hwiamerica.comhttp://www.hwiamerica.comUser ManualModel No. : DAH-1200T 128MB/256MB/512MBMulti Format Digital Audio PlayerMP3 & WMA PlaybackFM RadioVoice RecorderMusic Encoder
IMPORTANT NOTICEAbout copyrightsA copyright gives certain exclusive ownership rights to the personwho creates an original work. These rights are protected by the U.S.and international laws. It is illegal to reproduce copyrighted materialwithout the permission of the copyright owner. Whenever you copy, or make a direct-encoded recording, of musicor a video, or other original work that you did not create, consider thatit may be copyrighted. Ownership of a CD or licensed digital mediafiles that you downloaded from the Internet, or made a direct-encoded recording of, does not necessarily constitute the right toredistribute or share the content.If you intend to redistribute or share content, be sure you have thenecessary permissions to do so.Safety InstructionsWarningTo reduce danger of fire or electric shock, do not expose the product to rainor moisture.Do not release or distribute the music files formatted in WMA or MP3 fromthe product to the public. (As this would violate Copyright laws.)The software contained on the installation CD-ROM is for personal use only and it not to be distributed.To maintain best quality from the playerDo not use the product in hazardous conditions, such as extremelyhigh/ low temperatures, dusty area, or excessively wet areas.Do not leave the product in the bathroom, near/ on a heater, or in a carparked in the direct sunlight.Do not leave batteries in pockets with any metallic substance such as coinsor keys.(Doing so may cause fire from the batteries contacts)Throwing or dropping the product can cause shock damage.Avoid sudden shockAny data lost due to careless use is not our responsibility. (Any valuable data should be stored on your PC)Caution when using headsetAuditory sense may be damaged when listening to the music at a highvolume for extended time periods. Using a headset while driving a car or riding bicycle/motorcycle is notrecommended.Use caution when walking or jogging with device.Ear-in type headset should have a long wire to be located at the back of theneck.Do not ever disassemble to repair or rebuild the product as it may causepermanent damage.
Welcome to the world of MP3Contents123456810111214161819202124252627282931323335363839404142444546485051Welcome to the world of MP3What is a digital audio player?Product SpecificationPC System Specification and AccessoriesHardware OverviewPower SupplyInstallation of M-ANY Loader PlusHow to connect MP3 with PCWhen USB Port is not recognizedHow to use mobiBLU Loader PlusHow to format MemoryHow to download filesHow to upload filesExplanation of LCD DISPLAYPower On and Off & Auto power offHow to use Folder Navigation ModeSet up Repeat modesSet up Section Repeat modesSet up EQ Modes and Fast SearchingSet up User’s EQ ( User1, User2 )How to Record VoiceHow to Record MusicListening to Voice recorded files or Music filesHow to Erase filesHow to use FM RADIOSearching FM frequencySaving the frequency ( Preset Mode )Erasing saved frequencyHow to Record FM RadioReturn to Music Play ModeSet up HOLD ( Lock key )Remote Control ManualHow to check the O/S and manager versionHow to upgrade mobiBLU Loader PlusHow to upgrade Firmware ( O/S )Troubleshooting ProblemsWARRANTY SERVICEFCC RF INTERFERENCE STATEMENTThank you for purchasing portable digital audio player MP3 .MP3 is MP3 Player with simple design and FM Radio function. MP3 has built-in memory of 64/96/128/256/512MB. It is able to support forformat of new music and is made to cope with the problem of intellectualproperty. You can enjoy various content such as digital music and talk byplaying a cutting-edge digital audio player.Caution As Hyun Won Inc. owns copyright of this product, you must getapproval from the company when using its description, picture,software and other related documents. In the case of breach, youcan be penalized by the court of law. The content of thedescription could be changed without prior notice. 1
Product SpecificationWhat is a digital audio player?2What are MP3 and WMA File?MP3 and WMA files are compressed(1/12) data taken from CDsthrough MPEG1-Layer3 and converts the data into a file that can beused on computers. They provided music that has equivalent qualityof existing CD.What is portable digital audio player ?It is a portable player that enables digital audio file to be saved and playedthat in the past were only be available on existing PC computers.Caution WMA files must be recorder at a bit rate of 32Kbps or higher to play on the device Internet PCCommunicationDigital Audio File Digital Audio FileDigital Audio player3FM TUNERDivision ITEM SpecificationAudioFilesupportRecording timePlay timeBatterySize 36 81 16mm(W HD) (except battery) 35gWeightLCD Graphic LCDOperational temperature rangeUSB File type MP3,WMA(No DRM), ADPCM MP3:over 8Kbps, WMA:over 32KbpsBit RateDownload speed 4Mbps(USB Version 1.1)Voice record 1,040minutes (256MB)Music record 240minutes (256MB)-5 ~70Alkaline 1.5V AAAAbt. 9hrs. with 1EA AAA Frequency range 87.5MHz ~ 108.0MHz20Hz ~ 20KHz(L)7 + (R)7 (16 ) Maximum volume(L)7 + (R)7 (16 )maximum volume5090Headphone/earphone cord antennaHeadphone outputHeadphone outputS/N RatioAntennaFrequency rangeS/N RatioCD Data MP3 Data1/12CompressionWMA Data1/2Compression
Hardware Overview5PC System Specification and Accessories4Please visit our web site(http://www.mobiBLU.com) to see the latestaccessories as well as software and firmware.+A. Program CDMP3 FM AccessoriesB. Earphones C. ManualD. Line-in CableI. AAA BatteryH. Carrying case orCase with Armband(Optional Item)J. Remote Control(Optional Item)G. USB Cable G. Neck Strap PC Specification for the MP3 device.Microsoft OS (Windows 98, ME, 2000, XP) CD-ROM driveCPU with Pentium 200MHz or higher RAM 32MB ( 64MB for Windows ME or 2000 ) Hard disk with 128MB or more of free space(When saving music files, additional capacity of hard disk is needed.)USB port or
Power Supply7Power Supply6Use 1 AAA size battery. Open the battery cover by pushing inthe direction of the arrow.. Load the battery as indicated in theillustration, making sure that it is positionedcorrectly.(+ to +, and - to -). Replace the battery cover.1.5V AAA type 1EA battery.Please check carefully the polar points of thebattery to prevent the Product damage.Icons indicating the remaining capacity of the batteryWhen initially operating, the icons of the remaining capacity may not readable.(Battery usage time)(enough) (middle) (low)When using a general battery, the player could stop working, even though thebattery capacity icon shows medium level, due to the peculiarity of the battery.(In this case, please change the battery into a new one.)please change into a new battery as the following cases.When the icon blinks the signa; of EMPTY . When the player stops working immediately after pushing any button.When the panel of the indicator doesn t change with any button in the bodyon.1. Use 1 AAA size batteryopen the battery cover by pushing in the direction of the arrow. Playing time may vary depending on usage conditions, manufacturecompany, or kind of batteries.Batteries Playing TimeAlkaline Battery 9 hoursPlaying time of a battery
Installation of mobiBLU Loader Plus 9Installation of mobiBLU Loader Plus 8In order for the player and your PC to communicate and transfer digital files,you must first install the mobiBLU Loader Plus by completing the followingsteps:Notice1. Insert mobiBLU Loader Plus CD into CD-ROM drive. When CD is put in, Setupprogram is automatically executed and the screen below pops up.2. When Setup is started, follow the instruction of installation program.If the Setup program is not automatically executed, find and execute Setup.exe file in TCC folder of CD-ROM drive.Select language for installation and click Confirm. Then two windows belowpop up and Setup starts.Click!Click!1. Windows Xp users please note : You may receive a warning regarding Windows Driver certification, Click Yes or Next to continue the installation.2. If a rebooting message displays during setup, Reboot your PC to complete installation.Important Notice3. If you click on a finger, the screen below pops up.(If you click on the arrow below in order, the installation is completed.)4.After completing the installation, mobiBLU Loader Plus iconappears on Windows screen.Click!Click!Click!Click!Click!Click!mobiBLULoader Plus
When USB Port is not recognized11How to connect MP3 with PC10How to connect USB Cable.See the graphic below for visual instruction on how to connect the MP3 toPC. If mobiBLU Loader Plus does not recognize the players memory whenconnecting disconnect the USB Cable from MP3 and then turn on the powerand reconnect. PlayerDATA (USB Port)USB CableUSB PortWhen connecting the USB to the player, the power of the device is turned on.Reference1. When connecting the cable with MP3, please make sure the correct orientation of the connector end, and do not force the connector.2. Do not disconnect the cable by force when MP3 is communicating with your Computer, like downloading, uploading, OS updating and formatting. This may cause serious damage to your computer or MP3.Important NoticePlease refer to “Manager Program Help” in the installed mobiBLULoader PlusPlease connect the USB cable to a USB port on the back side of the PC case.If you connect the USB cable to a USB HUB or USB port on the front case, itmay cause an instable connection with the device.NOTE1. Open the Help site.2. Click the article of “How to reinstall the erroneously recognized USB Drive”3. If you still have a problem with USB connection, please see “Trouble Shooting” in this manual.Click!Click!
How to use mobiBLU Loader Plus13How to use mobiBLU Loader Plus12ABDGFHEA. File SelectorThis enables you to view files by type.B. File List WindowThis window displays the files contained in the selected folder enabling you to selectively download files to flash memory.C. Folder Manage IconsC1. Display the directory of the current2. Move to the Root Directory directly3. Make a new folder* To delete a folder, press “Delete” icon on the manager or “Del” key on the keyboard when the folder is selected.D. Memory Contents WindowThis window enables you to check the file title, size, type and download status of theflash memory of the player.Flash MemoryAdd : Adds the selected files to the selected memory. Selectedfiles are placed in “Ready to Transfer” status in the memorycontents window.Upload : Uploads of the selected MPE or ADPCM files on theplayer memory to the selected PC folderDelete : Deletes selected files on the selected memory Format: Formats flash memoryRefresh : Refreshes view of selected memoryCancel : Cancels file transfer between player and PC.E. Folder WindowThis window enables you to select audio files more easily by allowing you to browse specific folders of your PC. The selected folder contents are displayed in the File List Window to the right.F. Memory StatusThis indicates the amount of memory available, the amount of total memory and memory connection status. This window may indicate "No Memory Found" in cases Slim Sound FM is not connected properly.G. Transfer Files ButtonThis button begins transferring selected audio files to the player.H. Functional Icons
How to format Memory15How to format Memory14Using the Format icon 1Open the mobiBLU Loader Plus andconnect digital audio player to the PC .2Select the format type you prefer adialog box will appear to verify formatselected.3If you click on the YES button formatwill begin, When formatting completes,a dialog box appear to let you know theformat is complete.4Click the OK button to complete theprocess.WARNING Do not terminate the Format once it begins. If you remove USB Cablewhile it is being formatted, the player may be permanently damaged.Click!Click!Click!Click!Click!Click!Low Level Format : A "Low Level Format" is a longer procedure as it checks the disk sector by sector for any problems and repairs them if it finds them. This is somewhat similar to the 'Scandisk' program and requires that no other applications are opened during the formatting procedure.Normal Format :The "Normal Format" is, in essence, a quick 'clearing' of all the data on the memory card. It accomplishes the same thing as selecting all songs and deleting them.Normal format / Low level formatWhen using the menuClick!Click!
How to download files17How to download files161Run mobiBLU Loader Plus and Connect MP3 to your computer.12Highlight file/s to be downloaded in the File List Window using theFolder Window to browse for folders containing your audio files.You may select files one of 3 ways:The selected files will appear in the Memory Contents Windowwith "Ready to transfer" listed under the status column.a.You may drag & drop individual files from the File List window to the Memory Contents Window.b.You may select multiple audio files by holding down the CTRL key while clicking the left-mouse button on each file you wish to download to the player then drag and drop the selection of files as above.c.You may press the "F5" key or "Add" icon after highlighting each file.3Click the "Transfer" button to start downloading selected files tothe memory.Click!Click!4To cancel a download in progress click the "Cancel" icon.5Close the mobiBLU Loader Plus before disconnecting the USB
Explanation of LCD DISPLAY 19How to upload files18How to upload fileMP3/WMA file cannot be uploaded under related laws. (Other files such as MPE,ADPCM, ZIP, DOC, etc. can be uploaded.)If you want to move file from MP3 to the PC, follow the instructionbelow.Select files in the Memory Contents Window that you want to upload, and click the ‘Save it to PC/Upload’ button, then the files are uploaded to the selected folder on your PC.NoteFile cannot be played during communication with the PC.a. You may drag & drop individual files from the Memory Contents Window to the File List window.b. You may select multiple audio files by holding down the CTRL key while clicking the left-mouse button on each file you wish to upload to the player then drag and drop the selection of files as above.NoteMUSIC PLAY MODEFM RADIO MODEa. Song titleb. Current file extensionc. Current state(PLAY , PAUSE )d. Equalizere. Play time f. Volume (0~30)g. TRACK Number h. HOLD i. ( )Repeat the current song, ( )Repeat all songs( )Play all songs once in Random modej. Voice and music recordingk. Amount of batteryabcde f ghi j kabc de f ghija. Frequency b. FM icon, MP3 icon during recordingc. The receiving frequencyd. Radio, Preset (Autoset, Erase All) onPresent MODEe. Recording time f. Volume (0~30)g. Preset Num:1~10,(Others - ‘000’)h. HOLDi. FM Radio recordingj. Amount of batteryk. Stereo On/Offk
How to use Folder Navigation Mode21Power On and Off & Auto power off201. Power On : Press Play ( ) button for 2 seconds or until the LCD illuminates.Play Music : Press Play( ) button shortly to play music.a. If there are music files in the Root Folder, it’s ready to play the first music file(Stop Mode).* Auto Power save mode: If the player senses it is not used for 5 minutes at Pause Mode, it will automatically go to Stop Mode.* Auto Power off mode: If the player senses it is not used for 5 minutes at Stop Mode, it will be automatically turned off.* Resume Play function : When power is turned off normally as above, and the user turn it on again, last position of the music will beplayed.b. If there is no music file in the Root Folder, the initial Mode will be Folder Navigation Mode.You can navigate sub directories andfiles with Vol+/ - and FF/REW buttons.2. Pause : Press Play button shortly while playing. It will be Pause mode.3. Stop : Press Stop button shortly while playing. It will be Stop mode. 4. Power Off : Press Stop ( ) button for 3 seconds or until the LCD shuts off.Get in Folder/File Navigation ModeIt’s not available at Pause mode, FM Radio mode, and Recordingmode. It’s only available at STOP mode of Music Play.Files will be listed fist at the current folder.If there are sub folders, they will be listed after the last file.Press Play button to play the current music.1. Press Mode button shortly at STOP mode of MP3 Player. If there is a music file at the Root Folder, the file will be listed first.2. Navigate files and folders with Vol.+ / - button.
How to use Folder Navigation Mode23How to use Folder Navigation Mode22If there are sub folders, they will be listed after the last file.Press Play button to play the current music.If the current folder is ROOT, there is no response with REC button.4. Move to upper folder with REW button.Move out from Folder Navigation ModeThere are four ways to get out from this mode.It moves to the Stop Mode of Music Play and ready to play the finally selected file in the folder.Press Play button to play the current music.1. Press Mode button shortly during Navigation.It moves to Root folder and exit the file/Folder mode.2. Press STOP button shortly during Navigation.It moves to Voice Record Mode and ready to start Voice Record. If you press REC button shortly, it starts Voice Recording.3. Press REC button for 2 seconds during Navigation.It moves to Music Play mode directly.4. Press PLAY button shortly during Navigation.If there are sub folders, they will be listed after the last file.Press Play button to play the current music.3. Get into the selected sub folder with FF button.
Set up Section Repeat modes25Set up Repeat modes24RANDOM / REPEAT MODE Press the MODE button shortly while the file is playing.NORMAL REPEAT REPEAT-ALL FOLDER-ALL RANDOM RANDOM-ALLRepeat All: Plays all songs in selected foldercontinuously.Repeat: Plays one selected song continuously.Normal: Plays all songs in the folder in the order they are stored.Random: Plays all songs in selected folder oncein a random orderFolder All: Plays all songs in all foldersRandom All: Plays all songs in selected folder continuously in a random order.Note1. If currently playing file format is not *.ADP file(Voice Recorded file), this mode will play all music files(*.MP3/*.MPE/ *.WMA)2. If you press FF(Fast Forward) button in this Folder All mode, songs out ofthe current folder will be played in order from ROOT folder after the songsin the current folder. REPEAT MODE(Repeat an interval of the current song)1. Press the MODE button for 2 seconds while the file is playing.REPEAT MODE' is displayed. 2. Press Mode button again shortly at desired beginning point.The message “Repeat A-” appears on the LCD display.3. Press REC button again to mark the desired ending point. The message “Repeat A-B” appears on the LCD display.4. File is repeated in the range between A and B.If position B is not specified, the player will default the ending position to the end of the file. If you press the STOP button, REPEAT MODE is canceled.
Set up User’s EQ(User1, User2)27Set up EQ Modes and Fast Searching26Fast Searching 1. If you press and hold the FF/REW button while inplay mode, FF/REW Searching is done in 4 speedincrements, the searching speed increases are 4x,8x, 16x and 32x regular speed.(every five secondsrespectively.) 2. During REW Searching, when beginning of thesong is reached, Music plays from the start.3. During FF Searching, when the end of a song isreached , the searching will begin from the initialpart of next song.(Play for about 2 seconds from thebeginning of the song.)EQ MODESThere’re 5-preset EQ modes and two user’s EQ modes.(User 1 and User2)The mode will be changed by pressing play( )button for 2 seconds in play mode, in order, as follows;Live Dance Jazz Latin Rock User 1 User 2Each time you press PLAY button for 2 seconds the EQ settings will change inthe order listed above. The option you stop at is the one that will be set on the player. Sound quality may drop according to the song. The equalizer can be used tooptimize the song quality .USER1 MODE, USER2 MODE1. Begin in Play MODEUSER EQ MODE is available only while music is playing.- Press "MODE" button for 2 seconds in.(Repeat MODE appear on the display)- Press "MODE" button again for 2 seconds.("USER1" MODE appears on the display)- Press "MODE" button again for 2 seconds.(USER2 MODE appears on the display)2. USER EQ SETTING MODE- Press "MODE" button once quickly while "USER1" or "USER2"is displayed. (doing so will allow you to personalize your EQ settings)(5 Bar will be display on LCD)3. Change EQ setting (USER1 EQ, USER2 EQ)- Change EQ setting is only available when bars are displayed onLCD. - First Bar will blink indicating edit mode.- Change EQ Bar with FF/REW button.(move between 5 Bars)- Change Value with Vol +/- button. (value of each bar)(-15~+15 : 31 levels)4. Quit User EQ mode- Press "STOP" button shortly to quit EQ mode.
How to Record Music29How to Record Voice281. Voice record function is only available while Player is in STOP MODE. 2. Press the REC button for 2 seconds, VOICE RECORD is displayed.3. Press the REC button shortly, voice recording is initiated. (REC icon is turned on in the lower part of LCD screen, and Recording... is displayed.) 4. To terminate recording, press the STOP button.ADP : Voice Recorded files ( V ***. ADP ) are saved in this folder automatically. ( If there s no ADP folder at the starting Voice Recording, ADP folder will be created in root folder. )5. To play the recorded file, press the PLAY button. The recorded file isdisplayed as V001, V002, V003,.....NoteIf flash Memory is full, it will flash two times and then, the Recordingwill end automatically. (If battery dies during recording, the recordedfile is automatically saved and power is shut down.) 1. Insert one end of Encoding Cable into the earphone terminal of an ordinary audio device (ie: CD Player, Cassette deck, Radio) and the other end into IN PUT AUDIO terminal of the MP3. 2. Begin in STOP mode, Press the REC button for 2 seconds, VOICE RECORD is displayed, Press the REC button once more for 2 seconds,Music Record is displayed. 3. Press REC button again shortly, music recording begins. (Recording icon isturned on in the lower part of LCD screen, and Recording... is displayed.)You can listen to the file through earphone while recording. (loop back)
Listening to Voice recorded files or Music files31How to Record Music30What is loop back?Function that enables you to verify/listen to recoding that is currentlybeing executed through earphones with a little noise, (During loopback, you may hear some interference but the actual file will nothave the same problem.) 4. To terminate recording, press the STOP button5. To play the recorded file, press the PLAY button. The recorded fileis displayed as E001, E002, E003,...NOTE: If flash Memory is full, it will flash two times and theRecording will end automatically. (If battery dies during recording,the recorded file is automatically saved and power is shut down.)MPE : Music Recorded files ( E ***. MPE ) are saved in this folderautomatically.( If there s no MPE folder at the starting Music Recording, MPE folder will be created in root folder. )1. There are two types of file formats.a. Music Files: *.MP3 / *.MPE: *.WMAb. Voice Recorded Files: *.ADP2. How to change the type of playing formatPress PLAY button for a while in each STOP mode.
How to use FM RADIO33How to Erase files321. Erase MODE can only be used while in STOP mode2. Begin in STOP mode, Press the REC button for 2 seconds, VOICE RECORD is displayed, Press the REC button for a second time for 2 seconds, Music Record is displayed. Press the REC button for a third time for 2 seconds, Erase Mode is displayed.3. Press REC button again shortly, Erase Mode is initiated. 4. Locate the file you want to erase with FF/REW button, Once the file is located, press the REC button shortly. “Erase? Yes:rec NO:Other” is displayed. - To erase, press the REC button shortly, Erasing..” is displayed and the file is erased. - To cancel erasing, press any other button except REC shortly, then, Erase Cancel” is displayed and erasing is terminated. Erase function?This function enables you to remove files from the player withoutconnecting it to the PC/ mobiBLU Loader Plus.1. RADIO MODE can only be initiated in STOP mode. 2. Begin in STOP mode, Press the MODE button for 2 seconds, FM Radiois displayed ( FM Radio” is displayed for about 3 seconds, and then received current frequency is displayed.) 3. FM icon is displayed in the upper left part of LCD. Radio icon isdisplayed in the right-upper part of LCD.4. Preset Number is displayed where Track Number of MP PlayerMODE is normally shown. Preset Number is the number of the savedfrequency. A total of 10 frequencies can be saved. (Preset Number 1 ~ 10) NoteEach radio station uses different frequencies. The range of frequency modulation differs from nation to nation.NoteWhen you turn on the MP3, you begin in MP Player MODE. Then,press MODE button for 2 seconds to change the mode. (MP Player MODE, FM RADIO MODE)
Searching FM frequency35How to use FM RADIO34Listening to the radio FM RADIO MODE (Frequency 87.5MHz~108.0MHz) 1. After entering RADIO MODE, press the PLAY button shortly to listen to the FM radio.(RADIO MODE )- Antenna icon is displayed above FM icon.- According to the rate of received frequency, the level is indicated with a bar.To stop listening to the radio.1. While Radio is playing, press the STOP button shortly. The antenna icon is turned off. The frequency that you were listen to is automatically saved. - If STOP button is pressed for 3 seconds,Power is shut down.- After 5 minutes in Stop mode, it will be turned off automatically.Searching frequency manually1. Press the FF/REW button shortly to search frequency. (Frequency is increased or decreased by 0.05MHz.) 2. Searching is possible in both STOP and PLAY MODE. Searching frequency automatically: Searching frequency is possible inSTOP/ PLAY/ Preset/ Auto Set MODE.1. Press the FF/REW button for 2 seconds, searching frequency is automatically started. 2. When search reaches a high receiving rate, it is automatically stopped. 3. You can listen to radio when the searching is stopped.4. Auto Search by pressing FF/REW button in Stop mode will go to FM Radio play mode when the first Channel is searched.
Saving the frequency(Preset Mode)37Saving the frequency(Preset Mode)361. While the Radio is playing Press the MODE button for 2 seconds, Preset MODE is started. (Preset icon is displayed where Radio icon was shown.) 2. If you press MODE button shortly at Preset MODE, the current frequency is saved in the Preset Number that is displayed on LCD screen. (The frequency that was displayed in the middle of LCD screen flashes twice.) 3. Change the Preset Number by pressing FF/REW button briefly while in Preset MODE. (Preset Number is displayed just below the Volume ) 4. You can search frequency while in Preset MODE. - Search frequency by pressing FF/REW button for a while. Saving frequency with Preset MODE1. If you press MODE button for 2 seconds at Preset MODE, Auto Set MODEis started. (Auto Set icon is displayed where Preset icon used to be.)2. If you press MODE button at Auto Set MODE briefly, Auto setting" isdisplayed for 1 sec in the middle of LCD screen, and 10 frequency(001~010) is automatically saved.3. When frequency with a high receiving rate is received, Preset Number isautomatically increased and the frequency is saved. (You can select PresetNumber and frequency by using FF/REW button before searching at AutoSet MODE)4. Once all 10 frequency is saved, Preset Number is changed to '001' andreceive the frequency that is saved.5. If you press STOP button while executing auto search, the searching isstopped.- Only STOP button is recognized while auto searching.NoteAt Preset MODE or Auto Set MODE, press STOP button to get out ofMODE. But, while auto searching, only searching function is stopped.Saving frequency at Auto Set MODE(saving various frequency at once)
How to Record FM Radio39Erasing saved frequency381. If you press MODE button for 2 seconds at Auto Set MODE, All Erase icon isdisplayed where Auto Set icon used to be. Then, All Erase MODE is started.2. If you press MODE button shortly at All Erase MODE, Preset clear" isdisplayed and all the saved frequency is erased. All frequency belong to Presetnumber is initialized at 87.5MHz.Erasing Preset frequency (erasing all 10 at one time)2. Press REC the button briefly once more in RADIO RECORD MODE, therecoding will begin. While recording, REC icon is displayed in the lowerpart of LCD screen, and Recording..." is shown in the middle of thescreen. Format icon that is identical to recording file ( ) is displayedwhere FM icon used to be.1. While Radio is playing, press the REC button for 2 seconds RADIO RECORD” is displayed.( REC stand-by )
Set up HOLD (Lock key)41How to Record FM Radio403. To terminate the recording press the STOP or REC button briefly the recording is stopped. REC Stop" is displayed for 1 sec and then file name is displayed for 1 second. (E001, E002, E003... )- File name: The name of the file can be changed after uploading to the PC by using the mobiBLU Loader Plus. 4. If you press the STOP button for longer than 3 seconds while recording, the power is shut down, and the file being recorded is automatically saved. - While recording, FF/REW, MODE buttons are disabled. You can listen to radio through earphone. (Loop back) 1. Press the STOP button shortly while Radio is playing – this will stop the Radio from playing.2. Press the MODE button for 2 seconds, This will take you to MP Player Mode. Return to Music Play Mode1. How to lock the buttons- Move the slide key When you lock/Hold the player, it disables the functionof the buttons.- The Key icon appears on the LCD display to indicate the buttons are locked.2. To end the HOLD function - Move switch back to unlock the buttons. - The Key icon will disappear from your display indicating that your buttons are functioning again.
Remote Control Manual43Remote Control Manual42Earphone JackVOL+/ VOL-FFSTOPEQ / MODEPLAY/PAUSEREWHOLD1. This Remote Controller has 7 buttons and one slide “hold” switch. (PLAY/STOP/Vol+/Vol-/FF/REW/EQ/HOLD)2. Every button with the exception to the EQ/MODE button works exactly thesame as on the MP3.3. How to use the EQ/MODE button on the Remotea. REPEAT MODE - Please press EQ/MODE button while the song is playing. (Repeat A is displayed.)- Then press the EQ/MODE button again while song is playing. (Repeat B is displayed).The song will play continuously between A and B.Press Stop button to cancel the Repeat MODE.b. User EQ Settings.- Press the EQ/MODE button for 2 seconds to change EQ while a song is playing. (Icon will be displayed on set’s LCD on setting EQ.)c. How to switch between MP3 Player and Radio mode- Press EQ/MODE button for 2 seconds on stop mode, the mode will(MP PLAYER MODE RADIO MODE)d. PLAY MODE Settings.- Being in STOP moe, press the EQ/MODE button, the modewill be changed between Repeat and Random mode. (Icon will be displayed on LCD on setting.)4. How to use the HOLD Settings (Icon will be displayed on LCD) a. Move the Slide Switch to the HOLD positionb. HOLD disables the function of the buttons on the Remote and the MP3 device.
How to upgrade mobiBLU Loader Plus45How to check the O/S and Manager version44You need to visit our website(http://www.mobiBLU.com) from time totime to see if a new version of mobiBLU Loader Plus or a new versionof MP3 Firmware(OS) for upgraded functions.1. Run the manager of mobiBLU Loader Plus.2. Connect MP3 to your PC with USB cable.3. Select “Help” => “About Manager Program” and Click it4. You can see the version of OS and Manager.If the MP3 is not recognized(connected) to your PC, the O/S version willnot displayed.In that case, please refer to “Manager Program Help” in theinstalled mobiBLU Loader Plus.a. Run “mobiBLU Loader Plus” and b. Go to “Help” and select “How to reinstall the erroneously recognized USB Drive”1. How to Install the manager newly ;a. You should download the latest version of manager, named as mobiBLU Loader Plus” from our website.b. Delete the currently installed mobiBLU Loader Plus first by“Program add & delete”.c. Install the manager with the instruction on the process.2. How to use the Manager Update ;a. Run mobiBLU Loader Plus.b. Connect MP3 to your PC with USB cable.c. Check if your PC is on-line (connected with internet service)d. Select “View” => “Manager Update” and Click it.e. Click “Update” and complete the process.Click!Click!f. Before the Manager Update, If the version is lower than 1.0.0.8, please run the update once again.
How to upgrade Firmware(O/S)47How to upgrade Firmware(O/S)46Please visit our website(http://www.mobiBLU.com) to see if a new O/S is released. You can check it with name of the patch file and its released date.The file name should be “MP3 OS_xxxxx.zip”. “xxxxx” will be OS version number.1. Download the patch file(O/S installation file).2. After uncompress zip file, MP3_xxxxxB.exe and MP3_xxxxxM file will be shown up.3. Connect MP3 to your PC with USB cable.4. Excute MP3_xxxxxB.exe first.5. You can see the OS version information and click the Next.6. Please do not unplug the connected USB cable. This may cause a serious problem.7. Press "Finish" button to complete firmware update.8. Execute MP3_xxxxxM.exe and go through 4-7 process again.Click!Click! Click!Click!Click!Click!Click!Click!
Troubleshooting Problems49Troubleshooting Problems48If you encounter any of the problems listed below, followthe suggested solutions.1. MP3 will not download digital files from the PC.- Check the cable connection to the USB port.2. MP3 will not play.- Verify that the battery has been inserted correctly.- Check battery discharge status.3. The mobiBLU Loader Plus does NOT recognize thehardware connection.- Check the cable connection to the USB port.- You may need to re-install the software. If "No memoryfound" is shown again;- Connect the USB cable to another USB port.- Check if there is " TCC730_USB " in My computer ControlPanel System Device Manager.4. If there is "! (or?) USB Driver" or "! (or?) Untitled Device",USB driver was not installed correctly or is not properlyrecognized. In this case it is necessary to re-install the USBdriver.- To install the USB drivers, please refer to the Help file of the program.- If there are no contents related to USB in My computerControl Panel System Device Manager, you may have tocheck if your computer is compatible with USB driver.- Check if there is a conflict with the hardware in the Mycomputer Control panel System Device Manager.(Hardware conflicted with other hardware shows "!" or "?"mark in front of the device name.)- If you find a conflict between hardware, delete the conflictedhardware and reboot computer.- Please visit the Hyun Won Inc, website at www.mobiBLU.comfor the latest updates and software upgrades for the MP35. Installing the USB Driver manually- Insert Software CD into CD-ROM Drive (Do not execute theinstallation program.)Connect the MP3 Player to PC with USB cable.(If there is no USB driver to communicate between the MP3and the PC, the "New Hardware Wizard" will appear on thescreen.)- Proceed the installation following the on-screen instructions.- When the location of the drive is asked, select the folder ofyour CD ROM.(When the installation finishes, The New Hardware Wizardwill appear on screen again.)- Follow the on-screen instructions to complete the installationof the USB driver.Important NotePlease refer to “Help” of mobiBLU Loader Plus manager to seemore specific Solution.
FCC RF INTERFERENCE STATEMENT51WARRANTY SERVICE50Customers are entitled to warranty service for a period of oneyear from the date of purchase. Warranty service does notapply to defects resulting from customer fault or acts of God.Non-warranty service shall apply to defects resulting from:1. Infiltration of foreign matter, such as water, liquid, or sand.2. Breakage due to dropping or severe impact.3. Damage to or deformation of the outer case caused byorganic solvents, such as benzene.4. Use of parts other than those certified by the manufacturer.5. Loss or breakage of any parts or components caused byunauthorized disassembly.6. Repair or modification done by any persons other thanmanufacturer authorized personnel.7. Acts of God, such as lightning, storm or flood.8. Purchase from unauthorized retailers.For more warranty information and service options, pleasevisit the Hyun won inc. web site at http//:www.mobiBLU.com THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION ISSUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOTCAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANYINTERFERENCE RECEIVED INCLUDING INTERFERENCE THAT MAY CAUSEUNDESIRED OPERATION.CAUTION Changes or modifications not expressly approved by the party responsiblefor compliance could void the user's authority to operate the equipment.NoteThis equipment has been tested and found to comply with the limitsfor a Class B digital device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection againstharmful interference in a residential installation.This equipment generates, uses and can radiate radio frequencyenergy and, if not installed and used in accordance with theinstructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in aparticular installation.If this equipment does cause harmful interference to radio or televisionreception which can be determined by turning the equipment off andon, the user is encouraged to try to correct the interference by one ormore of the following measures.- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from thatto which the receiver is connected.- Consult the dealer or an experienced radio, TV technical for help.- Only shielded interface cable should be used.Finally, any changes or modifications to the equipment by the user notexpressly approved by the grantee or manufacturer could void theusers authority to operate such equipment.

Navigation menu