Hunter Fan TX31 Wall Fan Control User Manual

Hunter Fan Company Wall Fan Control

User manual

www.CasablancaFanCo.com 1.888.227.217811M6003-01 • 05/22/12 • © Casablanca Fan Company Using orange wire connectors, connect the two black wires (ungrounded) from the outlet box. Also connect the two green or bare wires (grounding) from the outlet box with the grounding wire from the wall control.After removing the switch plate cover, remove all wiring from the switch.Insert the wall control into the outlet box and secure the two screws using a Phillips head screwdriver. Install the cover plate using a Phillips Head screwdriver to secure the two cover plate screws. Wiring (continued)Push all connections to the back of the switch box. Spread the wires apart, with the grounded wires on one side of the outlet box and the ungrounded wires on the other side of the outlet box.This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Before BeforeBefore BeforeAfter After After After

Navigation menu