Huawei Technologies MC509 CDMA 1X EVDO Rev.A Module User Manual English

Huawei Technologies Co.,Ltd CDMA 1X EVDO Rev.A Module English

UserManual.wiki >

Huawei Technologies >

MC509 User Manual >

Contents

UserManual.pdf

Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. The product described in this manual may include copyrighted software of Huawei Technologies Co., Ltd and possible licensors. Customers shall not in any manner reproduce, distribute, modify, decompile, disassemble, decrypt, extract, reverse engineer, lease, assign, or sublicense the said software, unless such restrictions are prohibited by applicable laws or such actions are approved by respective copyright holders under licenses. Trademarks and Permissions , , and are trademarks or registered trademarks of Huawei Technologies Co., Ltd. Other trademarks, product, service and company names mentioned are the property of their respective owners. Notice Some features of the product and its accessories described herein rely on the software installed, capacities and settings of local network, and may not be activated or may be limited by local network operators or network service providers, thus the descriptions herein may not exactly match the product or its accessories you purchase. Huawei Technologies Co., Ltd reserves the right to change or modify any information or specifications contained in this manual without prior notice or obligation. NO WARRANTY THE CONTENTS OF THIS MANUAL ARE PROVIDED “AS IS”. EXCEPT AS REQUIRED BY APPLICABLE LAWS, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS

MANUAL. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO CASE SHALL HUAWEI TECHNOLOGIES CO., LTD BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, OR LOST PROFITS, BUSINESS, REVENUE, DATA, GOODWILL OR ANTICIPATED SAVINGS. Import and Export Regulations Customers shall comply with all applicable export or import laws and regulations and will obtain all necessary governmental permits and licenses in order to export, re-export or import the product mentioned in this manual including the software and technical data therein.

i Contents Getting to Know the MC509-P ......................................................................................................... 1 Dimension .................................................................................................................................1 Position of RF Connectors ......................................................................................................2 Pin Definitions ..........................................................................................................................2

1 Thank you for purchasing HUAWEI MC509 LTE mini PCIE Module (hereinafter referred to as the MC509) Note:  This manual briefly describes the dimension, the position of RF connectors and Pin definitions.  You are recommended to read the manual before using the MC509. Getting to Know the MC509 Dimension  The package of the mini PCIE module is 52 pin PCIE with a dimension of 51 mm × 30.4 mm × 3.4 mm. It is applied to the user interface board, and can be used as a wireless terminal in a network environment.

2 Position of RF Connectors The PCIE module provided three antenna connectors (MAIN_ANT, GPS_ANT and AUX_ANT) for connecting the external antennas. Pin Definitions  The sequence of mini-PCIE interface is shown below.

3  The Pin definitions of the Mini PCIE interface is shown below. PIN No. Pin Name I/O Description DC Characteristics (V) Mini PCI Express Standard Description HUAWEI Pin Description Min. Typ. Max. 1 WAKE# WAKE# O Open collector active low signal. This signal is used to wake up the host. –0.3 - - 2 3.3Vaux VCC_3V3 P 3.3 V DC supply rails from the PC side 3.0 3.3 3.6 3 COEX1 NC - Not connected - - - 4 GND GND - Ground - - - 5 COEX2 NC - Not connected - - - 6 1.5 V NC - Not connected - - - 7 CLKREQ# NC - Not connected - - -

4 PIN No. Pin Name I/O Description DC Characteristics (V) Mini PCI Express Standard Description HUAWEI Pin Description Min. Typ. Max. 8 UIM_PWR RUIM_PWR P Power source for the external RUIM card - 1.8/2.85 - 9 GND GND - Ground - - - 10 UIM_DATA RUIM_DATA I/O External RUIM data signal - 1.8/2.85 - 11 REFCLK- NC - Not connected - - - 12 UIM_CLK RUIM_CLK O External RUIM clock signal - 1.8/2.85 - 13 REFCLK+ NC - Not connected - - - 14 UIM_RESET RUIM_RESET O External RUIM reset signal - 1.8/2.85 - 15 GND GND - Ground - - - 16 UIM_Vpp NC - Not connected - - - 17 Reserved Reserved - Reserved - - -

5 PIN No. Pin Name I/O Description DC Characteristics (V) Mini PCI Express Standard Description HUAWEI Pin Description Min. Typ. Max. 18 GND GND - Ground - - - 19 Reserved Reserved - Reserved - - - 20 W_DISABLE# W_DISABLE# I The W_DISABLE# signal is an active low signal that when asserted (driven low) by the system shall disable radio operation. - - - 21 GND GND - Ground - - - 22 PERST# RESIN_N I Reset module Active-low - - - 23 PERn0 NC - Not connected - - - 24 3.3Vaux VCC_3V3 P 3.3 V DC supply rails from the PC side 3.0 3.3 3.6

6 PIN No. Pin Name I/O Description DC Characteristics (V) Mini PCI Express Standard Description HUAWEI Pin Description Min. Typ. Max. 25 PERp0 NC - Not connected - - - 26 GND GND - Ground - - - 27 GND GND - Ground - - - 28 1.5 V NC - Not connected - - - 29 GND GND - Ground - - - 30 SMB_CLK NC - Not connected - - - 31 PETn0 NC - Not connected - - - 32 SMB_DATA NC - Not connected - - - 33 PETp0 NC - Not connected - - - 34 GND GND - Ground - - - 35 GND GND - Ground - - - 36 USB_D- USB_DM I/O USB signal D- - - - 37 GND GND - Ground - - -

7 PIN No. Pin Name I/O Description DC Characteristics (V) Mini PCI Express Standard Description HUAWEI Pin Description Min. Typ. Max. 38 USB_D+ USB_DP I/O USB signal D+ - - - 39 3.3Vaux VCC_3V3 P 3.3 V DC supply rails from the PC side 3.0 3.3 3.6 40 GND GND - Ground - - - 41 3.3Vaux VCC_3V3 P 3.3 V DC supply rails from the PC side 3.0 3.3 3.6 42 LED_WWAN# LED_WWAN# O Active-low LED signal indicating the state of the card SINK current source Drive strength: 10 mA - - - 43 GND GND - Ground - - - 44 LED_WLAN# NC - Not connected - - -

8 PIN No. Pin Name I/O Description DC Characteristics (V) Mini PCI Express Standard Description HUAWEI Pin Description Min. Typ. Max. 45 Reserved PCM_CLK O PCM interface clock –0.3 2.6 2.9 46 LED_WPAN# NC - Not connected - - - 47 Reserved PCM_DOUT O PCM I/F data out –0.3 2.6 2.9 48 1.5 V NC - Not connected - - - 49 Reserved PCM_DIN I PCM I/F data in –0.3 2.6 2.9 50 GND GND - Ground - - - 51 Reserved PCM_SYNC O PCM interface sync –0.3 2.6 2.9 52 3.3Vaux VCC_3V3 P 3.3 V DC supply rail from the PC side 3.0 3.3 3.6

Navigation menu