Huawei Technologies EGW1520A eSpace EGW1520 User Manual QuickStartGuide

Huawei Technologies Co.,Ltd eSpace EGW1520 QuickStartGuide

QuickStartGuide.pdf

eSpace EGW1520 EnterpreSpace EGW1520 EnterprV100R001C01 Quick StarteSpace EGW1520 企业网关V100R001C01快速入门HUAWEI TECHNOLOGIES CO., LTD.Issue:04Part Number:31505357Date:2012-10-25文档版本：04文档编号：31505357发布日期：2012-10-25rise Gatewayrise Gateway 关
WelcomeWelcome to eSpace EGW1520 Enterprise Gdescribes how to install and configure the Erefer to the eSpace EGW1520 Enterprise Gin the CD-ROM delivered with the device.Usage NoticezKeep the power plugs clean and dry to azUse the power supply adapter provided wzKeep your hands dry when plugging in oPacking ListzPower off the device, remove all connectmaintenance personnel if smokes, noisesEGW1520 Power supply adapterDevice AppearanceRear ViewQuick StartDocument CD-ROM1RrereWentimSide ViewGateway (EGW1520). This document EGW1520. For more information, please Gateway Product Documentation provided void electric shock and other potential risks.with this product.ut the device cable.ted cables, and contact authorized s, or odors come from the device.Network cable (1)Analog phone lines (3)Warranty Card1ESET: Press the button for short time (≤ 6s) to estart. Press the button for long time (> 6s) to estore factory settings.WLAN: Press the button for short time (≤ 6s) to nable or disable WLAN. Press the button for long me (> 6s) to activate WPS.
Installation1 Preparing Installation ToolsInstall the EGW1520 on a horizontal surfacezI t lli th EGW1520 h i t l2 Installing the EGW1520Phillips screwdriver Claw hammer zInstalling the EGW1520 on a horizontal son the surface and leave 10 cm space arzTo install the EGW1520 on a wall, fix theof the swell fixtures is exposed for mount3 Connecting CablesPhone line portPhone line port3G data2After cables are connected, press the powethe POWER indicators (on the front panel) athe POWER indicator is steady, the EGW15Analog phoneIP phoNote: Either the ADSL or WAN port can be used. The FXO1/LINE port supports power-off survival, and you are advised to use it with preference.e or on a wall.fi Y l dtlitHammer drill Level ruler surface is easy. You only need to place it round for heat dissipation.e swell fixtures (M4) and ensure that 5 mm ting the EGW1520.Network cablePhone linePower supply socketNetwork cable porta card2r button to power on the EGW1520. View and check the EGW1520 working status. If 520 is working properly.oneFAXAnalog phoneIAD PC
Configuring the EGW1520Scenario DescriptionThe audio function of the EGW1520 is usedindependent IP PBX, IMS/NGN access gateUC solution. The following describes the condetails about scenario description and configThe EGW1520 supports Internet access thromethods are available: account and passwoInternet access mode and data, contact youROM delivered with devices.3 in one of the following scenarios: eway, and local gateway in a branch in the nfiguration methods in these scenarios. For guration cases, see the documentation CD-ough ADSL or WAN. In WAN mode, three ord, static IP, and DHCP. For the specific ur local network carrier.3
Planning Network Access InformatioItem ParameterWANAccountPPPoE user namePPPoE passwordStatic IPWAN IP addressWAN subnet maskaStarting Configuration ——NetwoStatic IPWAN gateway IP addressPrimary DNS serverDHCPADSLPVC Identifier (VPI)PVC Identifier (VCI)PPPoE user namePPPoE passwordWirelessSSIDWireless functionWireless access passwordStarting ConfigurationbLogging In to the Web ManagementConnect a PC to a LAN port on the EGWLog in to the EGW1520 using Internet Exdefault URL is https://192.168.1.1.Enter the user name (default: admin) andLog In.4cStarting ConfigurationChoose Quick Setup from the navigationChoose a country and click Next.Select a network connection mode accorand click Next. Verify parameter settingsClick Save And Continue and configure does not need to be configured, click Sav4onPlanning DescriptionorkingADSL and WAN are available.The WAN modes include the account, static IP, and DHCP submodes.To obtain the network access mode and data, contact the local network carrier.Indicates the ID of the EGW1520. The ID is displayed on a Wi-Fi terminal after the terminal finds the EGW1520. The default ID is eSpace EGW_****. **** is the last four di it i th WLAN MAC dddigits in the WLAN MAC address.The password is a string consisting of 8 to 63 ASCII characters or 64 hexadecimal digits. The default password is the WLAN MAC address of the EGW1520.t SystemW1520 using a network cable.xplorer 6.0 or a later version on the PC. The d password (default: Admin@123) and click 4n tree on the web management system.rding to step , set relevant parameters, .the audio function. If the audio function ve And Exit to exit the configuration wizard.a
Starting Configuration —— IndepaPlanning Users' Internal NumbersAnalog phones, fax machines, IP phones, anEGW1520. You are advised to connect fax mPHONE port.When the EGW1520 functions as an indepeprefix plus the called number to make an outthe FXO port.The default outgoing prefix is 888. The outgocalled number change rule in outgoing calls.An internal number is a string of 1 to 30 digitPhone TypeFax machine or analog phoneIP phoneAnalog phone 1 (connected to the EGW1520 through the IAD)Analog phone 2 (connected to the EGW1520 through the IAD)...An internal number is a string of 1 to 30 digitOSSCStarting ConfigurationbConfigure the IAD. The following describe1. Open Internet Explorer and enter the the address box.2Et th (df ltt)453On the SIP Serverpage, disable the UC Click Next to access the analog phone conot need to be configured when the EGWBased on the data plan in step , configleave the registration groups and externaClick Add in the right part of the IP Phon, configure internal numbers of SIP usersexternal numbers blank, and click Next.Click Finish to finish EGW1520 configura216a52.Enter the user name (default: root) anLog In to access the web manageme3. Choose Basic Configuration > Netwmode. Set the IAD IP address to 192.1port on the EGW1520: 192.168.1.1), sand set the IP address of the default g4. Choose SIP Service Configuration>SIP server to the IP address of the LA192.168.1.1).5. Choose SIP Service Configuration>user numbers) based on the data planpendent IP PBXnd IADs can be connected to the machines to the EGW1520 through the ndent IP PBX, users can dial the outgoing tgoing call, and the call is routed through oing prefix is deleted according to the tsUser Type Internal Number ExamplePOTS user 6001SIP user 6002SIP user 6003SIP user 6004... ...ts.es how to configure IAD208E(M).IAD IP address (default: 192.168.100.1) in dd(dfltdi)dlikmode and click Next.onfiguration page. Registration groups do W1520 functions as the IP PBX.ure internal numbers of POTS users, al numbers blank, and click Next.epage. Based on the data plan in step, leave the registration groups and ation.a5nd password (default: admin) and click nt page.work Parameterand select the static IP 168.1.x(default IP address of the LAN set the subnet mask to 255.255.255.0, gateway to 192.168.1.1.> SIP Server and set the IP address of the AN port on the EGW1520 (for example, > FXS User and set User ID (indicating n in step .a
Configure an IP phone. The following desphone. For details about other models, se1. Enter the IP address of the IP phone ican click OK on the IP phone to view 2. Enter the user name and password (dand click Log In to access the web m3. Click the Account tab. Set Register Nbased on the data plan in step . Seaddress of the LAN port on the EGW14. Click Submit to finish IP phone configYou can chooseVoice > Phone Alloc7aYou can choose Voice > Phone Allocsystem of the EGW1520 to view the rVerify the configuration according to the cdocument.8Starting Configuration —— IMS/NaPlanning SIP Server DataItem DescriptionType of the SIP server addressThe address can be an IP from the network carrier.SIP server address IP address or domain namnetwork carrier. For exampSIP ser er t peThe options areNGNandSIP server typeThe options are NGNand Heartbeat detection intervalInterval for the EGW1520 in seconds. The value rangrecommended.Registration intervalInterval for the registrationthis group to the SIP serveThe value ranges from 0 toAssume that the EGW1520 connects to the user-by-user registration.To obtain the registration group type, trunuser name, IMS domain name, external nucontact the network carrier. When the SIP sePlanning the Registration Groupb6name blank.Registration Group ID Registration Group Type Trunk RegistratioUser ID0User-by-user registration +86571876543211User-by-user registration +86571876543222User-by-user registration +8657187654323... ... ...scribes how to configure an eSpace 78xx IP ee the appropriate administrator guide.in the address box of Internet Explorer(You the IP address of the IP phone).default values: admin) of the administrator anagement page.Name to the user number of the IP phone et SIP Server to 192.168.1.1 (default IP 1520).guration.cation > IP Phonein the web managementcation > IP Phone in the web management registration status of the IP phone.chapter Verifying Configuration in this NGN Access Gatewayaddress and or a domain name. Obtain the type me of the SIP server. Obtain the address from the ple, the value can be 191.1.1.1 or m04.huawei.com. IMSObtain the t pe from the net ork carrierIMS. Obtain the type from the network carrier.to send heartbeat messages to the active SIP server, ges from 10 to 900. The default value 60 is n group to send registration messages for users in er, in seconds.o 14400. The default value 360 is recommended.IMS, and the registration group type is k registration user ID, trunk registration umbers,Authentication and Password,erver type is NGN, leave the IMS domain 6yp ,on Trunk Registration User Name IMS Domain Name+8657187654321@abc.def.com abc.def.com+8657187654322@abc.def.com abc.def.com+8657187654323@abc.def.com abc.def.com... ...
Planning User NumberscAnalog phones, fax machines, IP phones, anEGW1520. You are advised to connect fax mPHONE port.ItzThe ID of the registration group corresponthe same as that of the the trunk registration uwith +, you need to change + to 00 when youzInternal numbers can be customized.NOTEUser User TypeInternExamFax machine or analog phone POTS user 6001IP phone SIP user 6002Analog phone 1 (connected to the EGW1520 through the IAD) SIP user 6003Analog phone 2 (connected to the EGW1520 through the IAD) SIP user 6004... ... ...On theSIPServerpage disable the UC1Starting Configurationd453On the SIP Server page, disable the UC server based on the data plan in stepConfigure the registration group based onConfigure the POTS user's internal and ein step and click Next.Click Add in the right part of the IP Phonand external numbers based on the data Click Finish to finish EGW1520 configura216Configure the IAD. The following describe1. Open Internet Explorer and enter the the address box.2. Enter the user name (default: root) anLog In to access the web manageme3. Choose Basic Configuration > Netwmode Set the IAD IP address to192ac7mode. Set the IAD IP address to 192.port on the EGW1520: 192.168.1.1), sand set the IP address of the default g4. Choose SIP Service Configuration>SIP server to the IP address of the LA192.168.1.1).5. Choose SIP Service Configuration>user numbers) based on the data planConfigure an IP phone. The following desphone.1. Enter the IP address of the IP phone ican click OK on the IP phone to view t7nd IADs can be connected to the machines to the EGW1520 through the lN bRittiEt lN bnding to an external number of a user must beuser ID. If the trunk registration user ID startsu configure an external number.nal Number mpleRegistration Group IDExternal Number Example0 0086571876543211 0086571876543222 0086571876543233 008657187654324... ...mode and clickAddConfigure the SIPmode and click Add. Configure the SIP and click Next.n the data plan in step and click Next.external numbers based on the data plan e page. Configure the SIP users' internal plan in step and click Next.ation.es how to configure IAD208E(M).IAD IP address (default: 192.168.100.1) in nd password (default: admin) and click nt page.work Parameterand select the static IP 168 1x(default IP address of the LANbc7168.1.x(default IP address of the LAN set the subnet mask to 255.255.255.0, gateway to 192.168.1.1.> SIP Server and set the IP address of the AN port on the EGW1520 (for example, > FXS User and set User ID (indicating n in step .scribes how to configure an eSpace 78xx IP n the address box of Internet Explorer(You the IP address of the IP phone).c
St ti C fi tiL8Verify the configuration according to the cdocument.2. Enter the user name and password (dand click Log In to access the web m3. Click the Account tab. Set Register Nbased on the data plan in step . Seaddress of the LAN port on the EGW14. Click Submit to finish IP phone configYou can choose Voice > Phone Allocmanagement system of the EGW1520phone.cServer Type Planned Item RemarksStarting Configuration ——LocaSolutionaPlanning Server InformationWhen the EGW1520 functions as the local gSIP server on the central node at the headqsynchronizes them to the EGW1520. You dothe EGW1520.Before configuration, collect user quantity inallocation to the enterprise IT administrator.The default outgoing prefix of the EGW1520according to the called number change rule Data synchronization serverIP address Contact the eaddress of thPort numberContact the enumber of thenumber fails tKey for data synchronizationThe EGW152that of the dasame, the dathe EGW1520synchronizatiincluding diginegotiate withformat.SIP server addressThe address Obtain the ad8SIP serverSIP server typeThe options aenterprise IT When the SIPWhen the SIPHeartbeat detection intervalInterval for ththe active andranges from 3recommendeRegistration intervalInterval for thmessages forseconds. Thevalue 360 is rlG t i B hi th UCchapter Verifying Configuration in this default values: admin) of the administrator anagement page.Name to the user number of the IP phone et SIP Server to 192.168.1.1 (default IP 1520).guration.cation > IP Phone in the web 0 to view the registration status of the IP l Gateway in a Branch in the UC gateway in a branch in the UC solution, the quarters allocates all user numbers and o not need to configure user numbers on n the branch and apply for number 0is 888. The outgoing prefix is deleted in outgoing calls.enterprise IT administrator to obtain the IP e data synchronization server.enterprise IT administrator to obtain the port e data synchronization server. If the port to be obtained, use the default value 8098.20 compares its data synchronization key with ata synchronization server. If the keys are the ta synchronization server synchronizes data to 0; otherwise, the EGW1520 rejects the data on. The key is a string of 1 to 22 characters ts, letters, or special characters. You can h the enterprise IT administrator about the key can be an IP address and or a domain name. ddress from the enterprise IT administrator.8are IMS or NGN. Obtain the type from the administrator.P server is eSpace U1960, select NGN.P server is eSpace U2900, select IMS.e EGW1520 to send heartbeat messages to d standby SIP servers, in seconds. The value 30 to 150. The default value 90 is d.e registration group to send registration r users in this group to the SIP server, in e value ranges from 0 to 14400. The default recommended.
3On the SIP server page, enable the UC mserver based on the data plan in step .Click Add. Configure the SIP server baseClick Finish.You can choose Voice > Phone AllocatiEGW1520 to view the synchronized user 21Starting ConfigurationbaWhen configuring the IP phone, set SIP server 1, SIP the central node, standby SIP server in the central nodNOTEVerifying ConfigurationYou can visit a website (for example, http://enetwork function. If the access is successful,configured.aVerifying Network AccessVerifying the Audio FunctionbVerify the configuration according to the cdocument.4zIndependent IP PBX• Intra-office users dial each other's internumbers configurednumbers configured. • An intra-office user under the EGW152number (for example, mobile phone nu• An outer-office user dials the number thFXO port of the EGW1520. After hearinswitchboard, the outer-office user dials number). zIMS/NGN access gateway • Intra-office users dial each other's internumbers configured. • Calls are made between an analog phonetwork-side number (for example, a mzLocal gateway in a branch in the UC solu9zLocal gateway in a branch in the UC solu• Intra-office users dial each other's internumbers configured. • An intra-office user under the EGW152number (for example, mobile phone nu• An outer-office user dials the number thFXO port of the EGW1520. After hearinswitchboard, the outer-office user dials number). In the preceding scenarios, verify that the cafails, check the configuration and cable connmode. Configure the data synchronization ed on the data plan in step and click Next.ion in the web management system of the number.aserver 2, and SIP server 3 to the active SIP server in de, and IP address of the LAN port on the EGW1520.enterprise.huawei.com) and verify the , the network function is correctly chapter Verifying Configuration in this rnal numbers using phones that have 0 to dial the outgoing prefix (888) and the mber) of an outer-office user. hat the PSTN network carrier assigns to the ng the announcement played by the the extension number (that is, the internal rnal numbers using phones that have one or IP phone under the EGW1520 and a mobile phone number). ution9utionrnal numbers using phones that have 0 to dial the outgoing prefix (888) and the mber) of an outer-office user. hat the PSTN network carrier assigns to the ng the announcement played by the the extension number (that is, the internal alls are connected successfully. If a call nection.
Seeking Technical Support and ODeclaration on Hazardous SubstaProductsPartsHazardous SubstContact the device supplier to obtain techTechnical supportDocumentationObtain documentation from the CD-ROMSUPPORT > Products > UC&C > UC > obtain documentation.PartsHazardous SubstPb HgMechanical part ×○Board/circuit module ×○Signal cable ×○Cable connector ×○Power adapter ×○Auxiliary equipment ×○○：Indicates that the concentration of the hazh t i l fthi ti b l thhomogeneous materials of this part is below thestandard. ×： Indicates that the concentration of the hazhomogeneous materials of this part is above the1. Mechanical part such as shell: The steel, aluminum2. Board and circuit module: zThe PCB pad contains lead.zCeramic capacitor or feedthrough capacitor or ceramic chip contains lead.zThe resistor inside the clock oscillator is immuzThe high temperature type solder, used for the contains more than 85% lead.NOTE1contains more than 85% lead.zThe luminescence glass of chip inductor contaizThe high temperature type solder used for the tzThe glass of resistance layer and protection layzThe pin and solder of the components such as t3. Signal cables: The alloy materials such as the steelcontain lead. 4. Cable connector: For most connectors, the metal sh5. Power adapter: The interior contains lead.6.The circuit board of the auxiliary equipment containtwo.Obtaining Documentationances in Electronic Information tanceshnical support. delivered with the device orchoose UC in http://enterprise.huawei.com to tancesCd Cr6+ PBB PBDE○○ ○ ○○○ ○ ○○○ ○ ○○○ ○ ○○○ ○ ○○○ ○ ○ardous substance contained in all the li it i t f th SJ/T 11363 2006e limit requirement of the SJ/T 11363−2006 ardous substance contained in all the e limit requirement.m or copper materials contain lead.mica capacitor on the board: The une from lead.connector inside the transformer, 0ins lead.transistor chip contains lead.yer is immune from lead.the IC and power unit contain lead.l, aluminum, and copper materials hell, terminal and pin contain lead.ns lead. Same as point one and point
欢迎使用感谢您使用eSpace EGW1520企业网关（以完成设备安装及配置，更多信息请查阅随设备使用须知z请保持电源插头清洁、干燥，以免引起触z请使用产品配套的电源适配器。z插拔设备线缆时，应保持双手干燥。z如有不正常现象出现，如设备冒烟、声音源拔出连接在设备上的所有线缆并联装箱清单源，拔出连接在设备上的所有线缆，并联EGW1520 主机 电源适配器设备外观后视图快速入门资料光盘1侧视图以下简称EGW1520）。本文档将指导您快速备发货的资料光盘。触电或其它危险。音异常、有异味等，请立刻停止使用并断开电联系维护人员联系维护人员。直连网线（1根）普通电话线（3根）保修卡1RESET：短按（≤6s）重启；长按（＞6s）恢复出厂设置。WLAN：短按（≤6s）开启/关闭WLAN；长按（＞6s）激活WPS（Wi-Fi Protected Setup）。
1 准备安装工具EGW1520可直接放置在水平桌面上，也可以2 安装EGW1520十字螺丝刀 羊角锤安装EGW1520桌面放置：操作简单，只需将设备放置在水平以上的散热空间。挂墙安装：需要把膨胀螺钉（M4）固定在墙5mm左右露出墙面，然后将EGW1520挂在螺3 连接线缆3G数据电话线接口电话线接口1完成线缆连接后，请按下电源开关接通电源态，常亮表示设备正常。说明：ADSL、WAN二选一。FXO1/LINE具有断电逃生功能，建议优先使用。 IP话 传真机以挂墙安装。冲击钻 水平尺平的桌面上，并在设备四周和顶部留出10cm墙体（螺钉间距150mm），并保证膨胀螺钉有螺钉上。电源插座据卡网线接口网线电话线2源，并观察设备前面板的POWER指示灯状IAD话机PC 模拟话机模拟话机
配置EGW1520EGW1520的上网方式包括ADSL、WAN两种方式和DHCP方式，具体的方式及数据请咨询场景介绍EGW1520语音功能常用的场景分为三种——本地网关。以下分别介绍这三种场景的配置方作为参考。更详细的场景介绍及配置案例请参1种，WAN方式又分为账号密码方式、静态IP询当地网络运营商。—独立IP PBX、IMS/NGN接入网关和UC分支方法，您可以根据实际的组网选择对应章节参见随设备发货的资料光盘。3
开始配置——上网功能规划上网数据规划项 规划数据WAN帐号方式帐号密码静态IP方式IP地址子网掩码默认网关a默认网关DNS服务器DHCP方式ADSLPVC Identifier (VPI)PVC Identifier (VCI)帐号密码无线功能SSID无线密码b登录Web管理系统c开始配置通过普通网线连接PC维护终端和EGW152在PC维护终端使用IE浏览器（6.0及以上版https://192.168.1.1）。选择语言，并输入用户名（缺省为admin）录。在Web管理系统导航栏中选择配置向导。选择 在的 家单击步1选择所在的国家，单击下一步。根据步骤 中规划的数据，选择上网方式根据页面提示，核对所填写的参数。单击保存并继续，继续配置语音功能（如出，退出配置向导）。4a规划说明ADSL、WAN方式二选一。WAN方式中的账号方式静态IP方式和WAN方式中的，账号方式、静态IP方式和DHCP方式需要三选一。具体的上网方式和数据请咨询当地网络运营商。EGW1520的ID，WiFi终端搜索 EGW1520时会显示此ID。缺省为eSpace EGW_****（****为WLAN MAC地址的后4位）。8到63个ASCII码字符或者64个16进制数字8到63个ASCII码字符或者64个16进制数字，缺省为EGW1520的WLAN MAC地址。20的任意一个LAN接口。版本）访问EGW1520的地址（缺省为）和密码（缺省为Admin@123），单击登4式，并填写相应的参数，然后单击下一步。果不需要配置语音功能，可以单击保存并退
开始配置——独立IP PBX话机类型a规划用户内部号码EGW1520下可连接模拟话机、传真机、IP话EGW1520的PHONE口。EGW1520作为独立IP PBX时，用户可以拨打缺省出局字冠为888，出局时删除字冠。内部号码为1～30位数字，可自定义。传真机或模拟话机IP话机模拟话机1（通过IAD连接到EGW1520）模拟话机2（通过IAD连接到EGW1520）……3在SIP服务器页面，选择关闭UC模式，并单击下一步进入模拟话机配置页面。独立根据 中的数据规划，配置POTS用户的21开始配置ba配置IAD ，以配置IAD208E（M）为例，其1. 使用IE浏览器访问IAD的IP地址（缺省2. 输入用户名（缺省为root）和密码（a3. 选择基本配置 > 网络参数，选择静态I（EGW1520 的LAN口IP缺省为192.16认网关为192.168.1.1。4. 选择SIP业务配置 > SIP服务器，将SIP即192.168.1.1。45配置完成后单击下一步。在IP话机页面右侧单击添加，根据 中的册组和外部号码无需配置，配置完成后单击单击完成，完成EGW1520配置。6a15. 选择SIP业务配置 > FXS用户，根据a用户类型 内部号码举例话机及IAD等设备，建议您将传真机连接到打出局字冠+号码，通过FXO口出局。POTS用户 6001SIP用户 6002SIP用户 6003SIP用户 6004…… ……单击下一步。IP PBX场景无需配置注册组。的内部号码，注册组和外部号码无需配置，其他型号可以参考对应型号的快速入门。为192.168.100.1）。dmin），单击登录，进入Web管理界面。P方式。并设置IAD的IP地址为192.168.1.x68.1.1）、子网掩码为255.255.255.0、默P服务器IP配置为EGW1520的LAN口IP，的数据规划，配置SIP用户的内部号码，注击下一步。5中规划的数据配置用户ID，即用户号码。a
配置IP 话机，以配置eSpace 78xx系列为例管理员指南。1. 使用IE浏览器访问IP 话机的IP地址（在地址）。2. 输入管理员账号和密码（缺省账号和密理界面。3. 单击账号页签。根据 中规划的IP话机SIP服务器为192.168.1.1（EGW15204. 单击提交，完成IP话机的配置。您可以在EGW1520的Web管理系统的否注册成功7a否注册成功。配置完成后请参见验证配置结果章节，验证8开始配置—— IMS/NGN接入网关a规划SIP服务器数据规划项 规划说明SIP服务器地址类型 IP地址或者域名方式，请SIP服务器地址 SIP服务器的IP地址或者或m04.huawei.com。SIP服务器类型 NGN或IMS，请向网络运心跳检 间 时向首选规划注册组b注册组ID 注册组类型 中继注册用户ID0单用户注册 +8657187654321以接入IMS，注册组类型为单用户注册为例,进注册组类型、中继注册用户ID、中继注册用户需要从网络运营商处获取。SIP服务器类型为心跳检测间隔时长EGW1520向首选SIP服值范围为10～900，推荐注册期限时长 注册组代理组内用户向S值范围为0～14400，推11单用户注册 +86571876543222单用户注册 +8657187654323…… …… ……例进行配置，其他型号请参考对应型号的在IP话机上按OK键，可以查看IP话机的IP密码都为admin），单击登录，进入Web管机用户号码配置注册账号。配置IP话机的的LAN口地址）。的“语音设置 > 用户号码 > IP 话机”查看是证配置结果。请向网络运营商获取。者域名，请向网络运营商获取。例如：191.1.1.1运营商获取。务 送心跳检 的时间间单位为秒中继注册用户名 IMS域名+8657187654321@abcdfabc.def.com进行数据规划。户名、IMS域名、外部号码、鉴权模式及密码为NGN时，IMS域名为空。服务器发送心跳检测的时间间隔，单位为秒，取荐使用缺省值60。SIP服务器发起注册的周期，单位为秒，取推荐使用缺省值360。6.def.com+8657187654322@abc.def.comabc.def.com+8657187654323@abc.def.comabc.def.com…… ……
规划用户号码cEGW1520下可连接模拟话机、传真机、IP话EGW1520的PHONE口。用户用户类型内部z外部号码的配置需要和中继注册用户ID注册组需要和中继注册用户ID的注册组ID户ID为+开头，则配置外部号码时需要将+z内部号码为1～30位数字，可自定义。用户用户类型内部传真机或模拟话机 POTS用户 600IP话机 SIP用户 6002模拟话机1（通过IAD连接到EGW1520）SIP用户 6003模拟话机2（通过IAD连接到EGW1520）SIP用户 6004…… …… ……在SIP服务器页面选择关闭UC模式并1开始配置d453在SIP服务器页面，选择关闭UC模式，并服务器，配置完成后单击下一步。根据 中的数据规划配置注册组，配置完根据 中的数据规划，配置POTS用户的一步。在IP话机页面右侧单击添加，根据 中的部号码，配置完成后单击下一步。单击完成，完成EGW1520配置。216配置IAD，以配置IAD208E（M）为例，其1. 使用IE浏览器访问IAD的IP地址（缺省2. 输入用户名（缺省为root）和密码（a3. 选择基本配置 > 网络参数，选择静态I（EGW1520的LANIP缺省为192 16bcc1（EGW1520 的LAN口IP缺省为192.16认网关为192.168.1.1。4. 选择SIP业务配置 > SIP服务器，将SIP即192.168.1.1。5. 选择SIP业务配置 > FXS用户，根据c话机及IAD等设备，传真机建议连接在部号码举例注册组ID外部号码举例D配置对应。即用户外部号码对应的D 保持对应。如果中继注册用+改为00。部号码举例注册组ID外部号码举例1 0 00865718765432121 00865718765432232 00865718765432343 008657187654324……… ……单击添加根据中的数据规划填写SIPa单击添加。根据中的数据规划填写SIP完成后单击下一步。的内部号码和外部号码，配置完成后单击下的数据规划，配置SIP用户的内部号码和外其他型号可以参考对应型号的快速入门。为192.168.100.1）。dmin），单击登录，进入Web管理界面。P方式。并设置IAD的IP地址为192.168.1.x6811）子网掩码为255 255 255 0默a768.1.1）、子网掩码为255.255.255.0、默P服务器IP配置为EGW1520的LAN口IP，中规划的数据配置用户ID，即用户号码。c
完成 请参验证 结章节验证配置IP 话机，以配置eSpace 78xx系列为例1. 使用IE浏览器访问IP 话机的IP地址（在地址） 。2. 输入管理员账号和密码（缺省账号和密理界面。3. 单击账号页签。根据 中规划的IP话机SIP服务器为192.168.1.1（EGW15204. 单击提交，完成IP话机的配置。您可以在EGW1520的Web管理系统的否注册成功。7c8配置完成后请参见验证配置结果章节，验证开始配置—— UC分支本地网关a规划服务器信息类别 规划数据 备注数据同步服务器IP 数据同步服端口数据同步服UC分支场景中，用户号码全部由总部中心节无需配置。配置前需收集分支机构的用户数量，并向企业EGW1520缺省的出局字冠为888，出局时删端口数据同步服未提供，推同步密钥 EGW1520与身份的密钥EGW1520拒字母及特殊SIP服务器SIP服务器地址 SIP服务器的SIP服务器类型 IMS或者NGSIP服务器为SIP服务器为心跳检测间隔时长 EGW1520向隔，单位为1注册期限时长 注册组代理单位为秒，证结例。在IP话机上按OK键，可以查看IP话机的IP密码都为admin），单击登录，进入Web管机用户号码配置注册账号。配置IP话机的的LAN口地址）。的“语音设置 > 用户号码 > IP 话机”查看是证配置结果。服务器的IP地址，请向企业IT管理员获取。服务器的端口号请向企业IT管理员获取如果节点SIP服务器分配并同步，在EGW1520侧业IT管理员申请分配号码。除字冠。服务器的端口号，请向企业IT管理员获取，如果推荐使用缺省值8098。与数据同步服务器进行数据同步时，相互验证钥，双方的同步密钥需保持一致，否则拒绝进行数据同步。1～22位字符，可以是数字、殊字符，具体配置规则请与企业IT管理员协商。的IP地址或者域名，请向企业IT管理员获取。GN。具体请向企业IT管理员咨询。通常，为eSpace U1960时，选择NGN；为eSpace U2900系列时，选择IMS。向首选、备用SIP服务器发送心跳检测的时间间为秒，取值范围为30～150，推荐使用缺省值90。8理组内POTS用户向SIP服务器发起注册的周期，取值范围为0～14400，推荐使用缺省值360。
3在SIP服务器页面，选择开启UC模式，根的参数。单击添加，根据 中规划的数据，配置S单击完成，完成EGW1520配置。您可以在EGW1520的Web管理系统的“语号码。21开始配置b配置完成后请参见验证配置结果章节验证4a配置IP 话机时，请将SIP服务器1、SIP服务器2、SIP服务器及EGW1530B的LAN口IP地址。验证配置结果您可以通过登录互联网站点（如http://enterpr正确。如果可以正常访问，则表示网络功能配a验证上网功能验证语音功能b配置完成后请参见验证配置结果章节，验证4z独立IP PBX•在配置过号码的话机之间使用内部号码•使用EGW1520的模拟话机或IP话机，如手机号），查看呼叫是否成功。如手机号），查看呼叫是否成功。•局外用户拨打PSTN网络运营商分配给音后，再拨分机号（即内部号码），查zIMS/NGN接入网关•在配置过号码的话机之间使用内部号码•在EGW1520的模拟话机或IP话机上，呼叫是否成功。zUC分支接入网关•在配置过号码的话机之间使用内部号码•使用EGW1520的模拟话机或IP话机，如手机号），查看呼叫是否成功。•局外用户拨打PSTN网络运营商分配给音后再拨分机号（即内部号码）查1音后，再拨分机号（即内部号码），查如果呼叫失败，请检查以上配置是否正确及线据 中规划的数据，配置数据同步服务器SIP服务器的参数，配置完成后单击下一步。语音设置 > 用户号码”查看已同步的用户证配置结果aSIP服务器3分别配置成中心节点的主用、备用rise.huawei.com）验证网络功能配置是否配置成功，否则请检查配置。证配置结果。码互拨，查看呼叫是否成功。拨打出局字冠（888）+局外用户号码（例给EGW1520的FXO口的号码，听到总机提示查看呼叫是否成功。码互拨，查看呼叫是否成功。与网络侧号码（例如手机号码）互拨，查看码互拨，查看呼叫是否成功。拨打出局字冠（888）+ 局外用户号码（例给EGW1520的FXO口的号码，听到总机提示查看呼叫是否成功。9查看呼叫是否成功。线缆是否已连接。
技术支持及文档获取请联系设备提供商获得技术支持。技术支持文档获取您可以通过随设备发货的光盘或者访问华为（http://enterprise.huawei.com）的服务支取更多的文档。电子信息产品有毒有害物质声明部件名称有铅（Pb） 汞（Hg）镉（C结构件 ×○○单板/电路模块 ×○○信号线 ×○○线缆连接器 ×○○电源适配器 ×○○配套设备 ×○○○：表示该有毒有害物质在该部件所有均质材料中毒有害物质的限量要求》规定的限量要求以下。×：表示该有毒有害物质至少在该部件的某一均质量要求。1. 外壳等结构件：其中的钢材、铝材或铜2. 单板/电路模块：zPCB表面焊盘含铅。z单板上陶瓷/穿心/云母电容：瓷芯z钟振内部电阻含铅豁免。z变压器内部连接点用到铅含量在85z贴片电感铅用于光玻璃中2z贴片电感铅用于光玻璃中。z晶体管芯片焊接使用的高温焊料属z电阻层、保护层玻璃含铅豁免。z单板上IC、电源等元件引脚及焊料3. 信号线：其中的钢材、铝、铜等合金材4. 线缆连接器：大部分连接器金属外壳、5. 电源适配器：内部含铅。6. 配套设备中的电路板含铅，同上述第1为企业业务网站支持> 产品支持 > UC&C > UC > UC，获有毒有害物质或元素Cd）六价铬（Cr6+）多溴联苯（PBB）多溴二苯醚（PBDE）○○○ ○○○○ ○○○○ ○○○○ ○○○○ ○○○○ ○中的含量在SJ/T-11363－2006《电子信息产品有质材料中的含量超出SJ/T11363－2006规定的限铜材中含铅。芯含铅。5％以上的高温焊料。0属于有铅焊料。料含铅。材料中含铅。、端子、引脚含铅。1条、第2条。
HUAHuAWEI TECHNOLOGIES CO., LTD.awei Industrial Base Bantian Longgang Shenzhen 518129People’s Republic of China华为技术有限公司深圳市龙岗区坂田华为总部办公楼邮编：518129http://enterprise.huawei.comPeople s Republic of Chinahttp://enterprise.huawei.com

Navigation menu