Huawei Technologies E8372H-517 LTE Wingle User Manual

Huawei Technologies Co.,Ltd LTE Wingle Users Manual

UserManual.wiki >

Huawei Technologies >

E8372H 517 User Manual

Users Manual

Quick Start

Thank you for choosing the LT E Win gle . The LTE Wingle

allows you to access a wireless network at high speed.

Note:

This guide briefly describes the appearance of the LTE Wingle and the procedures for using

the LTE Wingle. For details about how to set the management parameters, see help

information on the web management page.

Connection Scenarios

Scenario 1: One-device Internet access

using computer

Scenario 2: Multi-device Internet access

using Wi-Fi (connected to a computer)

Scenario 3: Multi-device Internet access using Wi-Fi (connected to the power adapter)

Getting to Know Your LTE Wingle

The following figure shows the LTE Wing le. It is provided only for your reference. The

actual product may be different.

 USB connector

It connects the LTE Wingle to a computer.

 Wi-Fi indicator

It indicates the status of a Wi-Fi network.

 Steady green: A Wi-Fi connection is set up.

 Off: The Wi-Fi function is turned off or fails, or the LTE Wingle has been removed.

 SMS indicator

It indicates the status of an SMS.

 Steady green: There are unread messages in your inbox.

 Blinking green once every 2s: The message storage is full.

 Off: The LTE Wingle is powered off, there are no unread messages.

 2G/3G/LTE indicator

It indicates the LTE Wingle's status.

 Blinking green twice every 2s: The LTE Wingle is powered on.

 Blinking green once every 0.2s: The software of the LTE Wingle is being upgraded.

 Blinking green once every 2s: The LTE Wing le is registered with a 2G network.

 Steady green: The LTE Wingle is connected to a 2G network .

 Blinking blue once every 2s: The LTE Wingle is registered with a 3G network.

 Steady blue: The LTE Wingle is connected to a 3G network.

 Blinking cyan once every 2s: The LTE Wing le is registered with a LTE network.

 Steady cyan: The LTE Wingle is connected to a 3G+/LTE network.

 Off: The LTE Wingle is removed.

 microSD card slot

It holds a microSD card.

 SIM card slot

It holds a Subscriber Identity Module (SIM) card.

Getting Started

1. Slide the cover to remove it from the LTE Wingle.

2. Insert the SIM card and the microSD card into the corresponding card slots, as shown in

the following figure.

3. Replace the cover and slide it into place.

Note:

 The microSD card is an optional accessory. If it is not provided in the package, you can

buy one yourself.

 Ensure that the beveled edge of the SIM card is properly aligned with that of the SIM

card slot and the microSD card is inserted according to the direction as labeled on the

microSD card slot.

 Do not remove the microSD or SIM card when the card is in use. Otherwise, the card as

well as your LTE Wingle may get damaged and the data stored on the card may be

corrupted.

 Do not use any SIM card that is not standard or is incompatible with the LTE Wingle.

Otherwise, the card as well as your LTE Wingle may get damaged and the data stored

on the card may be corrupted.

Using the Power Adapter

Connect the LTE Wingle to the power adapter's USB port, and connect the power adapter

to a power outlet.

Note:

 Only use power adapters compatible with the LTE Wingle and provided by a designated

manufacturer (HW-050100xxW: The first x represents U, E, B, A, or J, depending on

your region. The second x represents generation number.). For details about the specific

adapter model, contact an authorized dealer. Use of an incompatible power adapter or

one from an unknown manufacturer may cause the LTE Wingle to malfunction, fail, or

could even cause a fire. Such use voids all warranties, whether expressed or implied, on

the product.

 The power adapter is an optional accessory. If it is not included in the product package,

purchase one separately.

Using Your LTE Wingle

The procedure for installing the management program depends on your computer's

operating system. The following sections are based on Windows 7.

Connecting to a Network

1. Connect the LTE Wingle to one of your computer's USB ports.

The installation wizard runs automatically.

2. When the installation is complete, the LTE Wingle's web management page is displayed

and the LTE Wi ngl e connects to the network automatically.

Note:

 If the installation wizard does not run automatically, find the AutoRun.exe file in the

driver path, and double-click the file to run it.

 The default user name and password of the web management page are admin.

 If your SIM card's personal identification number (PIN) verification function is enabled,

 If you are not using the default access point name (APN), log in to the web

management page, and configure and save the APN settings on the dial-up settings

tab.

 When using the LTE Wingle to access a network, do not use other devices to access the

network, because doing so may cause conflicts.

 If you are not connected to the network, access http://192.168.8.1 to check the device

status.

 If you cannot access http://192.168.8.1, disconnect other network connections, such

as an Ethernet or Wireless Fidelity (Wi-Fi) connection, remove and then insert the LTE

Wingle, or restart the computer.

Disconnecting from a Network

Remove the LTE Wingle from your computer.

Note:

 By default, the LTE Wingle automatically disconnects from the network if no data is

transferred within 10 minutes.

 If you do not need to connect to the network, it is recommended that you remove the

LTE Wi ngle from your computer to reduce data traffic.

 Disconnect the LTE Wingle's data connection through its web management page or the

Mobile Wi-Fi application. Before you remove the LTE Wingle, make sure that the data

connection has been disconnected.

Setting Up a Wi-Fi Connection

1. Ensure that the LTE Wingle's Wi-Fi function is on.

2. Select Start > Control Panel > Network and Internet > Network and Sharing Center >

Connect to a network.

Note:

Before establishing a Wi-Fi connection, ensure that the computer is equipped with a

wireless network adapter. If the computer indicates a wireless network connection, the

wireless network adapter can be used. Otherwise, verify that your wireless network

adapter is working properly.

3. Select the wireless network connection with the LTE Wingle's SSID and click Connect.

Note:

 If a security mechanism is enabled for the wireless network connection, enter the

correct network key.

 The SSID and the network key are printed on the LTE Wingle, as shown in the following

figure.

RESET

xxxxxxxx

4. Wait until a wireless network connection icon is displayed in the lower right corner of

the computer screen. A wireless network connection is set up.

Accessing the Internet

You can access the Internet after a connection between your LTE Wingle and Wi-Fi device

is set up.

Note:

By default, the LTE Wingle automatically disconnects from the Internet when you are

roaming.

Example 1: Connecting to a Game Console (for example, PSP)

through Wi-Fi

1. On the PSP, turn on the WLAN.

2. Choose Settings > Network Settings.

3. Select Infrastructure Mode.

4. Select New Connection, and enter the

connection name.

5. Select Scan to search for wireless

networks. A list of access points will be

displayed on the screen.

6. Select the access point with the LTE

Wingle's SSID, and press the ► button

on the PSP. Confirm the SSID, and

enter the correct wireless network

encryption key.

7. Press the ► button to proceed to the

next step, and then press the X button

to save settings.

8. Select Test Connection to test whether

the network connection is successful.

9. You can now open the browser and

access the network.

Example 2: Connecting to a Tablet Computer (for example, iPad)

through Wi-Fi

1. Touch Settings > WLAN to turn on

WLAN.

2. The tablet computer automatically

searches for wireless connections and

displays a list of access points.

3. Select the access point with the LTE

Wingle's SSID.

4. If required, enter the correct wireless

network encryption key, and tap Join.

(The lock icon indicates that the

encryption key is required to connect

to this wireless network.)

Note:

Wi-Fi devices, such as an iPhone, iPod touch, PS3 and NDSi, can all access the Internet

through the LTE Wingle. For specific operations, refer to the Wi-Fi device's user manual.

Viewing Service Information

Visit http://192.168.8.1 to view your service information.

Restoring Factory Defaults

If you are uncertain of which settings you have configured or changed, you can restore the

factory defaults that come with the LTE Wi ngle, and reconfigure the device.

To restore the factory defaults, connect the LTE Wingle to a computer or a power outlet,

and press and hold the RESET button for 2 seconds.

RESET

Note:

Restoring factory defaults deletes all the device's user-defined settings and restores all the

settings on the web management page to their defaults.

LTE is a trademark of ETSI.

31010STU_01

Safety Information

No part of this manual may be reproduced or transmitted in any form or by any

means without prior written consent of Huawei Technologies Co., Ltd. and its

affiliates ("Huawei").

The product described in this manual may include copyrighted software of Huawei

and possible licensors. Customers shall not in any manner reproduce, distribute,

modify, decompile, disassemble, decrypt, extract, reverse engineer, lease, assign,

or sublicense the said software, unless such restrictions are prohibited by

applicable laws or such actions are approved by respective copyright holders.

Trademarks and Permissions

, , and are trademarks or registered trademarks of Huawei

Technologies Co., Ltd.

Other trademarks, product, service and company names mentioned may be the

property of their respective owners.

Notice

Some features of the product and its accessories described herein rely on the

software installed, capacities and settings of local network, and therefore may not

be activated or may be limited by local network operators or network service

providers.

Thus, the descriptions herein may not exactly match the product or its accessories

which you purchase.

Huawei reserves the right to change or modify any information or specifications

contained in this manual without prior notice and without any liability.

DISCLAIMER

ALL CONTENTS OF THIS MANUAL ARE PROVIDED "AS IS". EXCEPT AS

REQUIRED BY APPLICABLE LAWS, NO WARRANTIES OF ANY KIND, EITHER

EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR

CONTENTS OF THIS MANUAL.

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT

SHALL HUAWEI BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR

CONSEQUENTIAL DAMAGES, OR LOSS OF PROFITS, BUSINESS, REVENUE,

DATA, GOODWILL SAVINGS OR ANTICIPATED SAVINGS REGARDLESS OF

WHETHER SUCH LOSSES ARE FORSEEABLE OR NOT.

THE MAXIMUM LIABILITY (THIS LIMITATION SHALL NOT APPLY TO LIABILITY

FOR PERSONAL INJURY TO THE EXTENT APPLICABLE LAW PROHIBITS

SUCH A LIMITATION) OF HUAWEI ARISING FROM THE USE OF THE PRODUCT

DESCRIBED IN THIS MANUAL SHALL BE LIMITED TO THE AMOUNT PAID BY

CUSTOMERS FOR THE PURCHASE OF THIS PRODUCT.

Import and Export Regulations

Customers shall comply with all applicable export or import laws and regulations

and be responsible to obtain all necessary governmental permits and licenses in

order to export, re-export or import the product mentioned in this manual including

the software and technical data therein.

To better understand how we protect your personal information, please see the

Safety information

This section contains important information about the operation of your device. It

also contains information about how to use the device safely. Read this information

carefully before using your device.

Electronic device

Do not use your device if using the device is prohibited. Do not use the device if

doing so causes danger or interference with other electronic devices.

Interference with medical equipment

 Follow rules and regulations set forth by hospitals and health care facilities. Do

not use your device where prohibited.

 Some wireless devices may affect the performance of hearing aids or

pacemakers. Consult your service provider for more information.

 Pacemaker manufacturers recommend that a minimum distance of 15 cm be

maintained between a device and a pacemaker to prevent potential interference

with the pacemaker. If using a pacemaker, hold the device on the side opposite

the pacemaker and do not carry the device in your front pocket.

Areas with flammables and explosives

 Do not use the device where flammables or explosives are stored (in a gas

station, oil depot, or chemical plant, for example). Using your device in these

environments increases the risk of explosion or fire. In addition, follow the

instructions indicated in text or symbols.

 Do not store or transport the device in containers with flammable liquids, gases,

or explosives.

Traffic security

 Observe local laws and regulations while using the device. To reduce the risk of

accidents, do not use your wireless device while driving.

 Concentrate on driving. Your first responsibility is to drive safely.

 RF signals may affect the electronic systems of motor vehicles. For more

information, consult the vehicle manufacturer.

 Do not place the device over the air bag or in the air bag deployment area in a

motor vehicle. Doing so may hurt you because of the strong force when the air

bag inflates.

 Do not use your device while flying in an aircraft or immediately before boarding.

Using wireless devices in an aircraft may disrupt wireless networks, present a

hazard to aircraft operation, or be illegal.

Operating environment

 Avoid dusty, damp, or dirty environments. Avoid magnetic fields. Using the device

in these environments may result in circuit malfunctions.

 Do not use your device during thunderstorms to protect your device against any

danger caused by lightning.

 Ideal operating temperatures are -10°C to +40°C. Ideal storage temperatures are

-20°C to +70°C. Extreme heat or cold may damage your device or accessories.

 Keep the device and accessories in a well-ventilated and cool area away from

direct sunlight. Do not enclose or cover your device with towels or other objects.

Do not place the device in a container with poor heat dissipation, such as a box

or bag.

 Do not expose your device to direct sunlight (such as on a car dashboard) for

prolonged periods.

 To protect your device or accessories from fire or electrical shock hazards, avoid

rain and moisture.

 Keep the device away from sources of heat and fire, such as a heater, microwave

oven, stove, water heater, radiator, or candle.

 Stop using your device or applications for a while if the device is overheated. If

skin is exposed to an overheated device for an extended period, low temperature

burn symptoms, such as red spots and darker pigmentation, may occur.

 Do not touch the device's antenna. Otherwise, communication quality may be

reduced.

 Do not allow children or pets to bite or suck the device or accessories. Doing so

may result in damage or explosion.

 Observe local laws and regulations, and respect the privacy and legal rights of

others.

Child's safety

 Comply with all precautions with regard to child's safety. Letting children play with

the device or its accessories may be dangerous. The device includes detachable

parts that may present a choking hazard. Keep away from children.

 The device and its accessories are not intended for use by children. Children

should only use the device with adult supervision.

Accessories

 Using an unapproved or incompatible power adapter, charger or battery may

cause fire, explosion or other hazards.

 Choose only accessories approved for use with this model by the device

manufacturer. The use of any other types of accessories may void the warranty,

may violate local regulations and laws, and may be dangerous. Please contact

your retailer for information about the availability of approved accessories in your

area.

Power adapter safety

 The power plug is intended to serve as a disconnect device.

 For pluggable devices, the socket-outlet shall be installed near the devices and

shall be easily accessible.

 Unplug the power adapter from electrical outlets and the device when not in use.

 Do not drop or cause an impact to the power adapter. If it is damaged, take it to

an authorized service center for inspection.

 If the power cable is damaged (for example, the cord is exposed or broken), or

the plug loosens, stop using it at once. Continued use may lead to electric shocks,

short circuits, or fire.

 Do not touch the power cord with wet hands or pull the power cord to disconnect

the power adapter.

 Do not touch the device or the power adapter with wet hands. Doing so may lead

to short circuits, malfunctions, or electric shocks.

 If your power adapter has been exposed to water, other liquids, or excessive

moisture, take it to an authorized service center for inspection.

 Ensure that the power adapter meets the requirements of Clause 2.5 in

IEC60950-1/EN60950-1/UL60950-1 and has been tested and approved

according to national or local standards.

Cleaning and maintenance

 Keep the device and accessories dry. Do not attempt to dry it with an external

heat source, such as a microwave oven or hair dryer.

 Do not expose your device or accessories to extreme heat or cold. These

environments may interfere with proper function and may lead to fire or

explosion.

 Avoid collision, which may lead to device malfunctions, overheating, fire, or

explosion.

 Before you clean or maintain the device, stop using it, stop all applications, and

disconnect all cables connected to it.

 Do not use any chemical detergent, powder, or other chemical agents (such as

alcohol and benzene) to clean the device or accessories. These substances may

cause damage to parts or present a fire hazard. Use a clean, soft, and dry cloth

to clean the device and accessories.

 Do not place magnetic stripe cards, such as credit cards and phone cards, near

the device for extended periods of time. Otherwise the magnetic stripe cards may

be damaged.

 Do not dismantle or remanufacture the device and its accessories. This voids the

warranty and releases the manufacturer from liability for damage. In case of

damage, contact an authorized service center for assistance or repair.

Environmental protection

 The device and its accessories (if included), such as the power adapter, headset,

and battery should not be disposed of with household garbage.

 Disposal of the device and its accessories is subject to local regulations. Support

proper collection and recycling.

FCC Regulatory Compliance

RF exposure requirements

Important safety information regarding radio frequency (RF) radiation exposure:

RF exposure guidelines require that the device be used at a minimum of 0.5 cm

from the human body. Failure to observe this guideline may result in RF exposure

exceeding limits.

Certification information (SAR)

This device is also designed to meet the requirements for exposure to radio waves

established by the Federal Communications Commission (USA).

The SAR limit adopted by the USA is 1.6 W/kg averaged over one gram of tissue.

The highest SAR value reported to the FCC for this device type complies with this

limit.

FCC statement

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

--Reorient or relocate the receiving antenna.

--Increase the separation between the equipment and receiver.

--Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

--Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) this device may not cause harmful interference, and (2)

this device must accept any interference received, including interference that may

cause undesired operation.

Caution: Any changes or modifications to this device not expressly approved by

Huawei Technologies Co., Ltd. for compliance could void the user's authority to

operate the equipment.

Industry Canada compliance

RF exposure requirements

Important safety information regarding radio frequency (RF) radiation exposure:

RF exposure guidelines require that the device be used at a minimum of 0.5 cm

from the human body. Failure to observe this guideline may result in RF exposure

exceeding limits.

Certification information (SAR)

This device is also designed to meet the requirements for exposure to radio waves

established by the Industry Canada.

The SAR limit adopted by Canada is 1.6 W/kg averaged over one gram of tissue.

The highest SAR value reported to the IC for this device type complies with this

limit.

IC Statement

This device complies with CAN ICES-3 (B)/NMB-3(B).

This device complies with Industry Canada licence-exempt RSS standard(s).

Operation is subject to the following two conditions: (1) this device may not cause

interference, and (2) this device must accept any interference, including

interference that may cause undesired operation of the device.

Conformité de l'Industrie Canada

Exigences RF en matière d'exposition

Informations de sécurité importantes concernant l'exposition aux radiofréquences

(RF) :

Les directives d'exposition RF exigent que l'appareil soit utilisé à une distance

minimum de 0.5 cm du corps humain. Le non-respect de cette directive peut

entraîner une exposition RF dépassant les limites.

Informations de certification (DAS)

Cet appareil est également conçu pour répondre aux exigences d'exposition aux

ondes radio établies par l'Industrie Canada.

La limite DAS adoptée par le Canada est de 1,6 W/kg sur 1 gramme de tissu. La

valeur DAS la plus élevée signalée à l'IC pour ce type d'appareil est conforme à

cette limite.

Déclaration de l'IC

Cet appareil est conforme à la norme CAN ICES-3 (B)/NMB-3(B).

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux

appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions

suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de

l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est

susceptible d'en compromettre le fonctionnement.

Please visit http://consumer.huawei.com/en/support/hotline for recently updated

hotline and email address in your country or region.

31224464_01

Huawei Technologies E8372H-517 LTE Wingle User Manual

Huawei Technologies Co.,Ltd LTE Wingle Users Manual

Users Manual

Navigation menu

Namespaces

Views

Navigation