Huawei Technologies BL-WX9 Huawei MateBook with WLAN, BT, (LE) User Manual

Huawei Technologies Co.,Ltd Huawei MateBook with WLAN, BT, (LE)

User manual

   Headset socket SpeakersPower button MicrophoneHidden ambient light sensor CameraCamera indicator Volume up buttonFingerprint sensor Volume down buttonCharging indicator USB Type-C portSocket for Portfolio Keyboard Keyboard port pin1Getting to know your MateBook EEnglish
2Initial setupCaution Charge your MateBook E before using it for the first time. Press and hold the power button to turn your MateBook E on.When you use your MateBook E for the first time, follow the onscreen instructions to complete the setup.• Connect to a wireless network• Log in to your MateBook E using a Microsoft accountLog in with your Microsoft account (such as Outlook.com) to access a range of Microsoft services on your MateBook E.• Set a PINUse your PIN to log in to your MateBook E and other apps and services.• Set up Windows Hello and add a fingerprint Touch the fingerprint sensor to unlock the screen, even when the screen is off.
3Getting startedStart menuOn the home screen, click (PC mode) or (Tablet mode) to open the start menu. You can:• Click to access the MateBook E settings.• Click to turn off or restart your MateBook E, or enable sleep mode.• Click (Tablet mode) to view your MateBook E apps.Action centerTo launch the action center, swipe left from the right edge of the screen or click . You can then: • Quickly access the settings, VPN, and projector screens.• Quickly change frequently-used settings (such as tablet mode, airplane mode, and screen brightness).
4Charging and restoring to factory settings for MateBook EYour MateBook E is pre-installed with an irremovable, rechargeable battery. You can charge your MateBook E with the adapter and USB-C charging cable that comes with it. The battery is sufficiently charged when the charging indicator stays steady green.Restore to factory settings Before restoring to factory settings, back up the data in Disk C and connect your MateBook E to the power supply.You can restore your MateBook E to factory settings in either of the following ways.• On the home screen, access the HUAWEI MateBook Manager. Click to access the backup and restore screen. Follow the onscreen instructions to restore your backup.• Press and hold the F10 during power-on, and access the factory resetting screen. Follow the onscreen instructions to restore your MateBook E to factory settings.
5HUAWEI Folio KeyboardFlip down the keyboard to prop up your MateBook EAttach your MateBook E to the keyboardMake sure that the keyboard is aligned with the slots, and attach your MateBook E to the keyboard properly.
HDMIUSBUSB-CUSB-CVGA6HUAWEI MateDock 2With MateDock 2, you can use multiple devices and accessories to your MateBook E, such as projector, TV, or USB flash drive, to better suit your needs.
7Safety informationThis section contains important information about how to use your device safely and how it operates. Read this information carefully before using your device.Electronic deviceDo not use your device if its use is prohibited or if it may cause danger or interference with other electronic devices.Interference with medical equipment• Adhere to any rules or regulations set forth by hospitals and health care facilities.• Some wireless devices may affect the performance of hearing aids or pacemakers. For more information, contact your service provider.• Pacemaker manufacturers recommend maintaining a minimum distance of 15 cm between a pacemaker and a wireless device to prevent potential interference with the pacemaker. If using a pacemaker, hold the device on the side opposite the pacemaker and do not carry the device in your front pocket.Protecting your hearing when using a headset• To prevent possible hearing damage, do not listen at high volume levels for long periods. • Using a headset at high volumes may damage your hearing. To reduce this risk, lower the headset volume to a safe and comfortable level.• Exposure to high volumes while driving may cause distraction and increase your risk of an accident.Areas with flammables and explosives• Do not use the device in environments where flammables or explosives are stored, such as a petrol station, because the electronics in the device may trigger an explosion or fire. Always adhere to any warning signs or information that may be present in these environments.
8• Do not store or transport the device in containers with flammable liquids, gases, or explosives.Traffic safety• Adhere to local laws and regulations while using the device. To reduce the risk of accidents, do not use your device while driving.• Concentrate on driving. Your first responsibility is to drive safely.• The signals from the device may interfere with the electronic systems of motor vehicles. For more information, contact the vehicle manufacturer.• Do not place the device over an air bag or in the deployment area of an air bag in a motor vehicle. Doing so may cause injury if the air bag deploys.• Do not use the wireless functions of your device while flying or while boarding an aeroplane. Doing so may interfere with the aeroplane’s systems and may be illegal.Operating environment• Avoid environments in which there is dust, damp, dirt, or magnetic fields. Using the device in these environments may cause it to malfunction.• Do not use your device during thunderstorms to protect your device against any danger caused by lightning. • Ideal operating temperatures are 0°C to 35°C. Ideal storage temperatures are –10°C to +45°C. Extreme heat or cold may damage your device or accessories.• Do not expose your device to direct sunlight (such as on a car dashboard) for prolonged periods. • To protect your device or accessories from fire or electrical shock hazards, avoid rain and moisture.• Keep the device away from sources of heat and fire, such as a heater, microwave oven, stove, water heater, radiator, or candle.• Do not place sharp metal objects, such as pins, near the earpiece or speaker. The earpiece may attract these objects and result in injury.
9• If the device overheats, close any opened applications or stop using it until it cools down. If skin is exposed to an overheated device for an extended period, low-temperature burn symptoms, such as red spots or darker pigmentation, may occur.• Do not touch the device's antenna. Otherwise, communication quality may be reduced. • Do not allow children or pets to bite or suck the device or accessories. Doing so may result in damage or explosion.• Adhere to local laws and regulations, and respect the privacy and legal rights of others.Child's safety• Keep the device and its accessories away from children and take all necessary precautions to ensure their safety. The device includes detachable parts that may present a choking hazard.• The device and its accessories are not intended for use by children. Children should use the device only under direct adult supervision. Accessories• Using an unapproved or incompatible power adapter, charger, or battery may cause a fire, explosion, or other hazards.• Use only approved accessories. The use of unapproved accessories may void the warranty, may violate local regulations and laws, and may be dangerous. For information about the availability of approved accessories in your area, contact your retailer.Charger safety• For pluggable devices, the socket-outlet shall be installed near the devices and shall be easily accessible.• Unplug the charger from the electric socket and from the device when not in use.• Do not drop or cause an impact to the charger.
10• If the power cable is damaged or the plug is loose, stop using it immediately. Continued use may lead to an electric shock, short circuit, or fire.• Do not touch the power cable with wet hands or pull it to disconnect the charger.• Do not touch the device or the charger with wet hands. Doing so may lead to an electric shock, short circuit, or malfunction.• If your charger has been exposed to liquid or excessive moisture, take it to an authorised service centre for inspection.• Ensure that the charger complies with Clause 2.5 in IEC60950-1/EN60950-1/UL60950-1 and has been tested and approved according to national or local standards.• Connect the device only to products that display the USB-IF logo or that comply with the USB-IF program.Battery safety• Do not bridge the battery terminals with conductive material, such as keys or jewellery. Doing so will short-circuit the battery and may cause injury.• Keep the battery away from excessive heat and direct sunlight. Do not place it on or in heating devices, such as microwave ovens, stoves, or radiators. Batteries may explode if overheated.• Do not attempt to modify the battery, insert foreign objects into it, or immerse or expose it to liquids. Doing so may lead to fire, explosion, or other hazards.• If the battery leaks, ensure that the electrolyte does not make contact with your skin or eyes. If contact is made, immediately flush with clean water and consult a doctor.• If battery deformation occurs, it changes colour, or it overheats while charging or storing, stop using the device immediately and remove the battery. Continued use may lead to battery leakage, fire, or explosion.• Do not dispose of batteries in fire as they may explode. Damaged batteries may also explode.
11• Dispose of used batteries in accordance with local regulations. Improper battery use may lead to fire, explosion, or other hazards.• Do not allow children or pets to bite or suck the battery. Doing so may result in damage or explosion.• Do not damage the battery or expose it to high external pressure. Doing so may lead to a short circuit or overheating. • Do not drop the device or battery. Doing so may damage the device or battery.• If the device standby time shortens significantly, replace the battery.• The device has a built-in, non-removable battery. Do not attempt to remove it. Doing so may damage the device. To replace the battery, take the device to an authorised service centre. • Use only IEEE-Std-1725-approved chargers and batteries. The use of an unqualified battery or charger may lead to fire, explosion, leakage, or other hazards.• Replace the battery only with an IEEE-Std-1725 standard qualified battery. The use of an unqualified battery may lead to fire, explosion, leakage, or other hazards.• Do not disassemble or open, crush, bend or deform, puncture or shred the battery. Otherwise, it may lead to electrolyte leakage, overheating, fire, or explosion.• Do not solder battery poles or dismantle the battery. Doing so may lead to electrolyte leakage, excessive heat, fire, or explosion.Cleaning and maintenance• Keep the device and accessories dry. Do not attempt to dry it with an external heat source, such as a microwave oven or hair dryer.• Do not expose your device or accessories to extreme heat or cold, which may interfere with proper function and may lead to fire or explosion.• Avoid collision, which may lead to device malfunctions, overheating, fire, or explosion. • Before you clean or maintain the device, stop using it, close all applications, and disconnect all cables connected to it.
12• Do not use chemical detergents, powders, or other agents (such as alcohol or benzene) to clean the device or accessories. These substances may cause damage to parts or present a fire hazard. Use a clean, soft, and dry cloth to clean the device and accessories.• Do not place magnetic stripe cards, such as bankcards and phone cards, near the device for extended periods of time. Otherwise, these cards may be damaged.• Do not dismantle or attempt to modify the device or its accessories. This voids the warranty and releases the manufacturer from liability for damage. In case of damage, contact an authorised service centre for assistance or repair.• If the device screen is damaged, stop using the device immediately. Do not touch or attempt to remove the broken parts. Contact an authorised service centre as soon as possible. Environmental protection• The device and its accessories (if included), such as the power adapter, headset, and battery, should not be disposed of with household waste.• Disposal of the device and its accessories is subject to local regulations. Ensure proper collection and recycling.Disposal and recycling informationThe crossed-out wheelie bin symbol on your product, battery, literature or packaging reminds you that all electronic products and batteries must be taken to separate waste collection points at the end of their working lives; they must not be disposed of in normal household waste. It is the responsibility of the user to dispose of the equipment using a designated collection point or service for separate recycling of waste electrical and electronic equipment (WEEE) and batteries according to local laws.Proper collection and recycling of your equipment helps ensure EEE waste is recycled in a manner that conserves valuable materials and protects human health and the environment. Improper handling, accidental breakage, damage, and/or improper recycling at the end of its life may be harmful for your health and the environment. For
13more information about where and how to drop off your EEE waste, please contact your local authorities, retailer or household waste disposal service or visit the websitehttp://consumer.huawei.com/en/. Reduction of hazardous substancesThis device and any electrical accessories are compliant with local applicable rules on the restriction of the use of certain hazardous substances in electrical and electronic equipment, such as EU REACH, RoHS and Batteries (where included) regulations, etc. For declarations of conformity about REACH and RoHS, please visit our web sitehttp://consumer.huawei.com/certification.EU regulatory conformanceBody worn operationThe device complies with RF specifications when used at a distance of 0.0 cm from your body. Ensure that the device accessories, such as a device case and device holster, are not composed of metal components. Keep the device away from your body to meet the distance requirement.Certification information (SAR)This device meets guidelines for exposure to radio waves.Your device is a low-power radio transmitter and receiver. As recommended by international guidelines, the device is designed not to exceed the limits for exposure to radio waves. These guidelines were developed by the International Commission on Non-Ionizing Radiation Protection (ICNIRP), an independent scientific organisation, and include safety measures designed to ensure the safety of all users, regardless of age and health.The Specific Absorption Rate (SAR) is the unit of measurement for the amount of radio frequency energy absorbed by the body when using a device. The SAR value is determined at the highest certified power level in laboratory conditions, but the actual SAR level during operation can be well below the value. This is because the device is designed to use the minimum power required to reach the network.The SAR limit adopted by Europe is 2.0 W/kg averaged over 10 grams of tissue, and the highest SAR value for this device complies with this limit.
14The highest SAR value reported for this device type when tested in portable exposure conditions is 1.57 W/kg.StatementHereby, Huawei Technologies Co., Ltd. declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.The most recent and valid version of the DoC (Declaration of Conformity) can be viewed at http://consumer.huawei.com/certification.This device may be operated in all member states of the EU.Observe national and local regulations where the device is used.This device may be restricted for use, depending on the local network.Restrictions in the 2.4 GHz band:Norway: This subsection does not apply for the geographical area within a radius of 20 km from the centre of Ny-Ålesund.Restrictions in the 5 GHz band:According to Article 10 (10) of Directive 2014/53/EU, the packaging shows that this radio equipment will be subject to some restrictions when placed on the market in Belgium (BE), Bulgaria (BG), the Czech Republic (CZ), Denmark (DK), Germany (DE), Estonia (EE), Ireland (IE), Greece (EL), Spain (ES), France (FR), Croatia (HR), Italy (IT), Cyprus (CY), Latvia (LV), Lithuania (LT), Luxembourg (LU), Hungary (HU), Malta (MT), Netherlands (NL), Austria (AT), Poland (PL), Portugal (PT), Romania (RO), Slovenia (SI), Slovakia (SK), Finland (FI), Sweden (SE), the United Kingdom (UK), Turkey (TR), Norway (NO), Switzerland (CH), Iceland (IS), and Liechtenstein (LI).The WLAN function for this device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range.Frequency Bands and Power(a) Frequency bands in which the radio equipment operates: Some bands may not be available in all countries or all areas. Please contact the local network provider for more details.(b) Maximum radio-frequency power transmitted in the frequency bands in which the radio equipment operates: The maximum power for all bands is less than the highest limit value specified in the related Harmonized Standard.
15The frequency bands and transmitting power (radiated and/or conducted) nominal limits applicable to this radio equipment are as follows:Bluetooth: 20 dBmWi-Fi 2.4G: 20 dBmWi-Fi 5G: 5150-5350: 23 dBm, 5470-5725: 30dBm.Accessories and Software InformationSome accessories are optional in certain countries or regions. Optional accessories can be purchased from a licenced vendor as required. The following accessories are recommended:Adapters: HW-59C200XHPQ1 HW-200200XP0 (X represents the different plug types used, which can be either C, U, J, E, B, A, I, R, Z or K, depending on your region)Batteries: HB25B7N4EBCThe product software version is 19.50.0.1. Software updates will be released by the manufacturer to fix bugs or enhance functions after the product has been released. All software versions released by the manufacturer have been verified and are still compliant with the related rules.All RF parameters (for example, frequency range and output power) are not accessible to the user, and cannot be changed by the user.For the most recent information about accessories and software, please see the DoC (Declaration of Conformity) at http://consumer.huawei.com/certification.IC statementCanada, Industrie Canada (IC)This Class B digital apparatus complies with Canadian ICES-003Cet appareil numérique de classe B est conforme à la norme NMB-003.This device complies with Industry Canada licence-exempt RSS standard(s).Operation is subject to the following two conditions:(1) this device may not cause interference, and(2) this device must accept any interference, including interference that may cause undesired operation of theLe présent appareil est conforme aux CNR d'Industrie Canada applicables auxappareils radio
16exempts de licence.L'exploitation est autorisée aux deux conditions suivantes:(1) l'appareil ne doit pas produire de brouillage, et(2) l'utilisateur de l'appareil doit accepter tout brouillage adioélectrique subi, même si lebrouillage est susceptible d'en compromettre le fonctionnement.RF Radiation Exposure Statement:For body worn operation, this device has been tested and meets RF exposure guidelines when used with anaccessory that contains no metal.Déclaration de l'exposition aux radiations RF:Pour le fonctionnement du corps, ce dispositif a été testé et répond aux directives d'exposition RF lorsqu'il est utiliséavec un accessoire qui ne contient pas de métal.FCC Regulatory ComplianceBody worn operationThe device complies with RF specifications when used at a distance of 0.0 cm from your body. Ensure that the device accessories, such as a device case and device holster, are not composed of metal components. Keep the device away from your body to meet the distance requirement.Certification information (SAR)This device is also designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA).The SAR limit adopted by the USA is 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported to the FCC for this device type complies with this limit.The highest SAR value reported to the FCC for this device type when using in portable exposure conditions is 1.19 W/kg.FCC statementThis device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
17communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to perform one or more of the following operations to try to correct the interference:--Reorient or relocate the receiving antenna.--Increase the separation between the equipment and receiver.--Connect the device into an outlet on a circuit different from that to which the receiver is connected.--Consult the dealer or an experienced radio/TV technician for help.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Caution: Any changes or modifications to this device not expressly approved by Huawei Technologies Co., Ltd. for compliance could void the user's authority to operate the device.Restrictions in the 5 GHz band:Within the 5.15 to 5.25 GHz band, UNII devices will be restricted to indoor operations to reduce any potential for harmful interference to co-channel Mobile Satellite System (MSS) operations.
18Personal Information and Data SecurityThe use of some functions or third-party applications on your device could result in your personal information and data being lost or becoming accessible to others. Use the following measures to help you protect your personal information:• Put your device in a safe place to prevent unauthorised use.• Set your device screen to lock and set a password or unlock pattern.• Periodically back up personal information stored on your memory card or your device memory. If you change to a different device, be sure to move or delete any personal information on your old device.• Do not open messages or emails from strangers to prevent your device from becoming infected with a virus.• When using your device to browse the Internet, do not visit websites that might pose a security risk to avoid your personal information from being stolen.• If you use services such as the portable Wi-Fi hotspot or Bluetooth, set passwords for these services to prevent unauthorised access. Turn these services off when they are not in use.• Install device security software and regularly scan for viruses.• Be sure to obtain third-party applications from a legitimate source. Downloaded third-party applications should be scanned for viruses.• Install security software or patches released by Huawei or authorised third-party application providers.• Using unauthorised third-party software to update your device may damage your device or put your personal information at risk. It is recommended that you update through your device's online update feature or download official update packages for your device model from Huawei.• Some applications require and transmit location information. As a result, a third-party may be able to share your location information.
19• Some third-party application providers may collect detection and diagnostic information on your device to improve their products and services.
20Legal NoticeCopyright © Huawei Technologies Co., Ltd. 2017. All rights reserved.This document, whether in part or whole, shall not be reproduced or transmitted in any way, shape, or form without the prior written consent of Huawei Technologies Co., Ltd. and its affiliates ("Huawei").The product described in this document may include software that is the copyright of Huawei or its licensors. Such software shall not be reproduced, distributed, modified, decompiled, disassembled, decrypted, extracted, reverse engineered, leased, assigned, or sublicensed unless such restrictions are prohibited by law or such actions are approved by the copyright holder.Trademarks and Permissions, , and are trademarks or registered trademarks of Huawei Technologies Co., Ltd.Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are registered trademarks of Dolby Laboratories.The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Huawei Technologies Co., Ltd. is under license. Wi-Fi®, the Wi-Fi CERTIFIED logo and the Wi-Fi logo are trademarks of Wi-Fi Alliance.HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.Microsoft and Windows are trademarks of the Microsoft group of companies.ENERGY STAR® MARKFor information related to ENERGY STAR®, please visit the website www.energystar.gov.Other trademarks, products, services and company names mentioned herein may be the property of their respective owners.
21NoticeSome features of the product and its accessories described herein rely on the software installed or the capacities and settings of the local network, and therefore may not be activated or may be limited by local network operators or network service providers.Thus, the descriptions herein may not exactly match the purchased product or its accessories which your purchase.Huawei reserves the right to change or modify any information or specifications contained in this manual without prior notice and without any liability.Third-Party Software StatementHuawei does not own the intellectual property of the third-party software and applications that are delivered with this product. Therefore, Huawei will not provide any warranty of any kind for third-party software and applications. Neither will Huawei provide support to customers who use third-party software and applications, nor be responsible or liable for the functions or performance of third-party software and applications.Third-party software and applications services may be interrupted or terminated at any time, and Huawei does not guarantee the availability of any content or service. Third-party service providers provide content and services through network or transmission tools outside of the control of Huawei. To the greatest extent permitted by applicable law, it is explicitly stated that Huawei shall not compensate or be liable for services provided by third-party service providers, or the interruption or termination of third-party contents or services.Huawei shall not be responsible for the legality, quality, or any other aspects of any third-party software installed on this product, or for any uploaded or downloaded third-party works in any form, including but not limited to texts, images, videos, or software etc. Customers shall bear the risk for any and all effects, including incompatibility between the software and this product, which result from installing software or uploading or downloading the third-party works.DISCLAIMERALL CONTENTS OF THIS DOCUMENT ARE PROVIDED “AS IS”. EXCEPT AS REQUIRED BY APPLICABLE LAWS, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED,
22INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS DOCUMENT.TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, UNDER NO CIRCUMSTANCES SHALL HUAWEI BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, OR LOSS OF PROFITS, BUSINESS, REVENUE, DATA, GOODWILL SAVINGS OR ANTICIPATED SAVINGS REGARDLESS OF WHETHER SUCH LOSSES ARE FORSEEABLE OR NOT.THE MAXIMUM LIABILITY (THIS LIMITATION SHALL NOT APPLY TO LIABILITY FOR PERSONAL INJURY TO THE EXTENT APPLICABLE LAW PROHIBITS SUCH A LIMITATION) OF HUAWEI ARISING FROM THE USE OF THE PRODUCT DESCRIBED IN THIS DOCUMENT SHALL BE LIMITED TO THE AMOUNT PAID BY CUSTOMERS FOR THE PURCHASE OF THIS PRODUCT.Import and Export RegulationsAll applicable export or import laws and regulations must be complied with and all necessary governmental permits and licenses must be obtained before exporting or importing the product, including the software and technical data, described in this document.Privacy PolicyTo better understand how we protect your personal information, please see our privacy policy at http://consumer.huawei.com/privacy-policy.For More HelpFor more help, go to http://consumer.huawei.com/en/ to download the User Guide.Please visit http://consumer.huawei.com/en/support/hotline for contact information in your country or region. The figures in this guide are provided for your reference only. The appearance and display features may vary slightly depending on the actual product version.

Navigation menu