Huawei Technologies AP7050DE Wireless LAN Access Point User Manual AP7050DE Product Description new

Huawei Technologies Co.,Ltd Wireless LAN Access Point AP7050DE Product Description new

User Manual Revised

      AP7050DE  Product Description  Issue 01 Date 2016-05-31 HUAWEI TECHNOLOGIES CO., LTD.
 Issue 01 (2016-05-31)  Huawei Proprietary and Confidential         Copyright © Huawei Technologies Co., Ltd.i  Copyright © Huawei Technologies Co., Ltd. 2016. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd.  Trademarks and Permissions   and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders.  Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are provided "AS IS" without warranties, guarantees or representations of any kind, either express or implied. The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute a warranty of any kind, express or implied.     Huawei Technologies Co., Ltd. Address:  Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website:  http://e.huawei.com
AP7050DE Product Description  About This Document Issue 01 (2016-05-31)  Huawei Proprietary and Confidential         Copyright © Huawei Technologies Co., Ltd.ii About This Document Intended Audience This document describes the positioning, characteristics, hardware structure, product features, and technical specifications of the AP. This document helps you understand the characteristics and features of the AP. This document is intended for:  Network planning engineers  Hardware installation engineers  Commissioning engineer  Data configuration engineers  On-site maintenance engineers  Network monitoring engineers  System maintenance engineers Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol  Description  Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.  Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.  Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.  Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results. NOTICE is used to address practices not
AP7050DE Product Description  About This Document Issue 01 (2016-05-31)  Huawei Proprietary and Confidential         Copyright © Huawei Technologies Co., Ltd.iii Symbol  Description related to personal injury.  Calls attention to important information, best practices and tips. NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.  Change History Changes between document issues are cumulative. The latest document issue contains all the changes made in previous issues. Changes in Issue 01 (2016-05-31) This is the initial commercial release.
AP7050DE Product Description  Contents Issue 01 (2016-05-31)  Huawei Proprietary and Confidential         Copyright © Huawei Technologies Co., Ltd.iv Contents About This Document .................................................................................................................... ii1 Product Positioning and Characteristics ................................................................................... 11.1 Product Positioning ....................................................................................................................................................... 11.2 Product Characteristics ................................................................................................................................................. 42 Hardware Structure....................................................................................................................... 72.1 AP7050DE .................................................................................................................................................................... 73 Product Features .......................................................................................................................... 113.1 WLAN Features .......................................................................................................................................................... 113.2 Network Features ........................................................................................................................................................ 123.3 QoS Features ............................................................................................................................................................... 123.4 Security Features ........................................................................................................................................................ 123.5 Maintenance Features ................................................................................................................................................. 133.6 BYOD ......................................................................................................................................................................... 133.7 Locating Service ......................................................................................................................................................... 133.8 Spectrum Analysis ...................................................................................................................................................... 144 Technical Specifications ............................................................................................................ 154.1 Basic Specifications .................................................................................................................................................... 154.2 Radio Specifications ................................................................................................................................................... 164.3 Standards Compliance ................................................................................................................................................ 23
AP7050DE Product Description  1 Product Positioning and Characteristics Issue 01 (2016-05-31)  Huawei Proprietary and Confidential         Copyright © Huawei Technologies Co., Ltd.1 1 Product Positioning and Characteristics 1.1 Product Positioning Table 1-1 Product positioning Product Model Frequency Band IEEE Standards Compliance Positioning  Usage Scenario AP7050DE Dual band:  2.4 GHz  5 GHz The AP7050DE can provide services simultaneously on the 2.4 GHz and 5 GHz frequency bands to support more access users. IEEE 802.11a/b/g/n/ac/ac wave2 The AP7050DE is the next-generation technology-leading AP. It supports HT80+HT80 4SU-4MU MU-MIMO and features high reliability, high security, simple network deployment, automatic AC discovery and configuration, and real-time management and maintenance. In compliance with IEEE 802.11ac, it supports a theoretical rate of up to 2.53 Gbit/s, greatly improving user experience. It provides high quality wireless services for large- and medium-sized enterprises in high-density scenarios, such as mobile office, elementary education, and higher education. The AP7050DE provides flexible distribution options in different environments.
AP7050DE Product Description  1 Product Positioning and Characteristics Issue 01 (2016-05-31)  Huawei Proprietary and Confidential         Copyright © Huawei Technologies Co., Ltd.2  Typical networking modes are as follows: Figure 1-1 Fit AP networking (AP mode)   In this networking, the AP functions as a fit AP. The AC is responsible for user access, AP go-online, AP management, authentication, routing, security, and QoS.Huawei AC products include the AC6605, AC6005, ACU2 (with S7700, S9700, or S12700), S5720HI, S7700 (with X1E board), S9700 (with X1E board), and S12700 (with X1E board).
AP7050DE Product Description  1 Product Positioning and Characteristics Issue 01 (2016-05-31)  Huawei Proprietary and Confidential         Copyright © Huawei Technologies Co., Ltd.3 Figure 1-2 Fit AP networking (WDS mode: point-to-point)   Figure 1-3 Fit AP networking (WDS mode: point-to-multipoint)   In this networking, the AP connects two or more independently wired or wireless LANs through wireless links to construct a network on which users can exchange data. In Wireless Distribution System (WDS) mode, the AP supports point-to-point (P2P) and point-to-multipoint (P2MP) networking modes. With 5 GHz and 2.4 GHz frequency bands, the AP can implement wireless bridging and access functions.
AP7050DE Product Description  1 Product Positioning and Characteristics Issue 01 (2016-05-31)  Huawei Proprietary and Confidential         Copyright © Huawei Technologies Co., Ltd.4 Figure 1-4 Fit AP mesh networking   In this networking, APs function as mesh points (MPs) and are fully-meshed to establish an auto-configured and self-healing wireless mesh network (WMN). APs with the gateway function can work as the mesh portal points (MPPs) through which the WMN can provide access to the Internet. Terminals connect to APs to access the WMN. The WMN uses dedicated mesh routing protocols to guarantee high transmission quality and is more applicable to scenarios that require high bandwidth and highly stable Internet connections. 1.2 Product Characteristics The AP7050DE has the following advantages on a WLAN. Product Characteristics Description High-speed and reliable wireless access  Compatibility with IEEE 802.11a/b/g/n/ac/ac wave2  Supports HT80+HT80 4SU-4MU MU-MIMO and a rate up to 2.53 Gbit/s.  Supports a rate of up to 800 Mbit/s at 2.4 GHz frequency band.  Supports a rate of up to 1.73 Gbit/s at 5 GHz frequency band.  Link aggregation of dual Ethernet ports  Supports Wi-Fi Multimedia (WMM) and priority mapping on the
AP7050DE Product Description  1 Product Positioning and Characteristics Issue 01 (2016-05-31)  Huawei Proprietary and Confidential         Copyright © Huawei Technologies Co., Ltd.5 Product Characteristics Description air interface and wired interface.  Supports wired link integrity check.  Supports load balancing.  Supports roaming without service interruptions.  Supports dual-AC backup.  Supports beamforming.  Latest 802.11ac wave2 chip with higher performance and wider coverage Comprehensive user access control capability  Supports access control lists (ACLs) and implements user access control based on the user group policy.  Provides fine-grained bandwidth management for each user.  Supports user isolation policies.  Supports uniform authentication on an AC.  Identifies the device type according to the organizationally unique identifier (OUI) in the MAC address, user agent (UA) information in an HTTP packet, and DHCP options in Fit AP mode.  The RADIUS server delivers packet forwarding, security, and QoS policies according to the device type carried in the RADIUS authentication and accounting packets in Fit AP mode. High network security  Open system authentication  WEP authentication/encryption  WPA/WPA2-PSK authentication and encryption  WPA/WPA2-802.1x authentication and encryption  Supports wireless intrusion detection system (WIDS) and wireless   intrusion prevention system (WIPS), including rogue device   detection and countermeasure, attack detection and dynamic   blacklist, STA/AP blacklist and whitelist. Flexible networking and environment adaptability  Provides flexible networking capabilities and applies to various application scenarios. Mesh and WDS scenarios are supported only in Fit AP mode.  Has strong environment adaptability. The AP can automatically select the transmission rates, channels, and transmit power to adapt to various radio environments and avoid interference in real time.  Adjusts bandwidth allocation based on the user quantity and environment to improve user experience.  Supports the MIMO antenna system with built-in dual-band smart antennas.  Identifies interference sources such as baby monitors, Bluetooth devices, digital cordless phones (at 2.4 GHz frequency band only), wireless audio transmitters (at both the 2.4 GHz and 5 GHz frequency bands), wireless game controllers, and microwaves in Fit AP mode and works with eSight to locate interference sources
AP7050DE Product Description  1 Product Positioning and Characteristics Issue 01 (2016-05-31)  Huawei Proprietary and Confidential         Copyright © Huawei Technologies Co., Ltd.6 Product Characteristics Description and display spectrums. Easy device management and maintenance  Automatically goes online and loads the configuration, and supports plug-and-play (PnP) in Fit AP mode.  Supports batch upgrade.  Allows real-time monitoring on the network management system (NMS) to facilitate remote configuration and fast fault location.  Supports the Link Layer Discovery Protocol (LLDP) to implement automatic link discovery and obtain the network topology.
AP7050DE Product Description  2 Hardware Structure Issue 01 (2016-05-31)  Huawei Proprietary and Confidential         Copyright © Huawei Technologies Co., Ltd.7 2 Hardware Structure 2.1 AP7050DE Appearance Figure 2-1 shows the appearance of the AP.  The actual device appearance may be different from the following device appearance, but these differences will not affect device functions. Figure 2-1 AP7050DE appearance   Port The following figure shows ports on the AP7050DE.
AP7050DE Product Description  2 Hardware Structure Issue 01 (2016-05-31)  Huawei Proprietary and Confidential         Copyright © Huawei Technologies Co., Ltd.8 Figure 2-2 AP7050DE ports 2 3 4 5 61 7  As shown in Figure 2-2, each port can be described as follows:  1. Default button: restores factory settings if you hold down the button more than 3 seconds.  2. USB port: connects to a USB flash drive to extend the storage space of the AP, and provides a maximum of 1 W power.  3. Console port: connects to the maintenance terminal for AP configuration and management.  4. GE1: 10/100/1000M port used to connect to the wired Ethernet.  5. GE0/PoE: 10/100/1000M port used to connect to the wired Ethernet. The port can connect to a PoE power supply to provide power for APs.  6. Input port for 12 V DC power supply.  7. Lock port: protects the AP against theft. LED Indicators  Indicator colors may vary slightly at different temperature. Type  Color  Status  Description Default status after power-on Green  Steady on  The AP is just powered on and the software is not started yet. Software startup status Green Steady on after blinking once After the system is reset and starts uploading the software, the indicator blinks green once. Until the
AP7050DE Product Description  2 Hardware Structure Issue 01 (2016-05-31)  Huawei Proprietary and Confidential         Copyright © Huawei Technologies Co., Ltd.9 Type  Color  Status  Description software is uploaded and started, the indicator remains steady green. Running status  Green  Blinking once every 2s (0.5 Hz)  The system is running properly, the Ethernet connection is normal, and STAs are associated with the AP.  The system enters the Uboot CLI. Blinking once every 5s (0.2 Hz) The system is running properly, the Ethernet connection is normal, and no STA is associated with the AP. The system is in low power consumption state. Alarm Green Blinking once Alarm Green every 0.25s (4 Hz)  The software is being upgraded.  After the software is uploaded and started, the AP requests to go online on the AC and maintains this state until it goes online successfully on the AC (before the CAPWAP link is established).  The AP fails to go online on the AC (the CAPWAP link disconnects). Fault Red  Steady on A fault that affects services has occurred, such as a DRAM detection
AP7050DE Product Description  2 Hardware Structure Issue 01 (2016-05-31)  Huawei Proprietary and Confidential         Copyright © Huawei Technologies Co., Ltd.10 Type  Color  Status  Description failure or system software loading failure. The fault cannot be automatically rectified and must be rectified manually.
AP7050DE Product Description  3 Product Features Issue 01 (2016-05-31)  Huawei Proprietary and Confidential       Copyright © Huawei Technologies Co., Ltd.11 3 Product Features 3.1 WLAN Features WLAN features supported by the AP are as follows:  Compliance with IEEE 802.11a/b/g/n/ac/ac wave 2  Maximum rate of 2.53 Gbit/s  Maximum ratio combining (MRC)  Space time block code (STBC)  Beamforming  Low-density parity-check (LDPC)  Maximum-likelihood detection (MLD)  Frame aggregation, including A-MPDU (Tx/Rx) and A-MSDU (Rx only)  802.11 dynamic frequency selection (DFS)  Short GI in 20 MHz, 40 MHz and 80 MHz modes  Priority mapping and packet scheduling based on a Wi-Fi Multimedia (WMM) profile to implement priority-based data processing and forwarding  Automatic and manual rate adjustment  WLAN channel management and channel rate adjustment  For details about WLAN channel management, see the Country Code & Channel Compliance Table.  Automatic channel scanning and interference avoidance  Service set identifier (SSID) hiding  Signal sustain technology (SST)  Unscheduled automatic power save delivery (U-APSD)  Control and Provisioning of Wireless Access Points (CAPWAP)  Automatic login  Extended Service Set (ESS)  Wireless distribution system (WDS)  Mesh networking  Multi-user CAC
AP7050DE Product Description  3 Product Features Issue 01 (2016-05-31)  Huawei Proprietary and Confidential       Copyright © Huawei Technologies Co., Ltd.12 3.2 Network Features Network features supported by the AP are as follows:  Compliance with IEEE 802.3u  Auto-negotiation of the rate and duplex mode and automatic switchover between the Media Dependent Interface (MDI) and Media Dependent Interface Crossover (MDI-X)  Compliance with IEEE 802.1q  SSID-based VLAN assignment  VLAN trunk on uplink Ethernet ports  AP control channel in tagged and untagged mode  DHCP client, obtaining IP addresses through DHCP  Tunnel data forwarding and direct data forwarding  STA isolation in the same VLAN  Access control lists (ACLs)  Link Layer Discovery Protocol (LLDP)  Uninterrupted service forwarding upon CAPWAP channel disconnection  Unified authentication on the AC  AC dual-link backup  IPv6 3.3 QoS Features QoS features supported by the AP are as follows:  Priority mapping and packet scheduling based on a Wi-Fi Multimedia (WMM) profile to implement priority-based data processing and forwarding  WMM parameter management for each radio  WMM power saving  Priority mapping for upstream packets and flow-based mapping for downstream packets  Queue mapping and scheduling  User-based bandwidth limiting  Adaptive bandwidth management (the system dynamically adjusts bandwidth based on the number of users and radio environment to improve user experience) 3.4 Security Features Security features supported by the AP are as follows:  Open system authentication  WEP authentication/encryption using a 64-bit, 128-bit, or 152-bit encryption key  WPA/WPA2-PSK authentication and encryption (WPA/WPA2 personal edition)  WPA/WPA2-802.1x authentication and encryption (WPA/WPA2 enterprise edition)    WPA-WPA2 hybrid authentication
AP7050DE Product Description  3 Product Features Issue 01 (2016-05-31)  Huawei Proprietary and Confidential       Copyright © Huawei Technologies Co., Ltd.13  Supports wireless intrusion detection system (WIDS) and wireless    intrusion prevention system (WIPS), including rogue device    detection and countermeasure, attack detection and dynamic    blacklist, STA/AP blacklist and whitelist.    802.1x authentication, MAC address authentication, and Portal authentication  DHCP Snooping  DAI (Dynamic ARP Inspection)  IPSG (IP Source Guard) 3.5 Maintenance Features Maintenance features supported by the AP are as follows:  Unified management and maintenance on the AC  Automatic login and configuration loading, and plug-and-play (PnP)  Batch upgrade  Telnet  STelnet using SSH v2  Local AP management through the serial interface  Real-time configuration monitoring and fast fault location using the NMS  System status alarm  Dying Gasp 3.6 BYOD  The AP supports bring your own device (BYOD) only in Fit AP mode. BYOD features supported by the AP are as follows:  Identifies the device type according to the organizationally unique identifier (OUI) in the MAC address.  Identifies the device type according to the user agent (UA) information in an HTTP packet.  Identifies the device type according to DHCP options.  The RADIUS server delivers packet forwarding, security, and QoS policies according to the device type carried in the RADIUS authentication and accounting packets. 3.7 Locating Service  The AP supports the locating service only in Fit AP mode. Locating service features supported by the AP are as follows:  Locates tags manufactured by AeroScout or Ekahau.  Locates Wi-Fi terminals.
AP7050DE Product Description  3 Product Features Issue 01 (2016-05-31)  Huawei Proprietary and Confidential       Copyright © Huawei Technologies Co., Ltd.14  Works with eSight to locate rogue devices.  Supports Bluetooth and RFID location. 3.8 Spectrum Analysis  The AP supports spectrum analysis only in Fit AP mode. Spectrum analysis features supported by the AP are as follows:  Identifies interference sources such as baby monitors, Bluetooth devices, digital cordless phones (at 2.4 GHz frequency band only), wireless audio transmitters (at both the 2.4 GHz and 5 GHz frequency bands), wireless game controllers, and microwaves.  Works with eSight to perform spectrum analysis on interference sources.
AP7050DE Product Description  4 Technical Specifications Issue 01 (2016-05-31)  Huawei Proprietary and Confidential         Copyright © Huawei Technologies Co., Ltd.15 4 Technical Specifications 4.1 Basic Specifications Table 4-1 Basic specifications Item  Description Technical specifications Dimensions (H x W x D) 53 mm x 220 mm x 220 mm Weight 1.3 kg System memory   256 MB DDR3L  4 MB NOR FLASH + 128 MB NAND FLASH Power specifications Power input   DC: 12 V ± 10%  PoE power supply: in compliance with IEEE 802.3at Maximum power consumption 25 W NOTE The actual maximum power consumption depends on local laws and regulations. Environment specifications Operating temperature  -60 m to +1800 m: -10°C to +50°C  1800 m to 5000 m: Temperature decreases by 1°C every time the altitude increases 300 m. Storage temperature -40°C to +70°C Operating humidity 5% to 95% (non-condensing) IP rating  IP41 Atmospheric pressure 53 kPa to 106 kPa
AP7050DE Product Description  4 Technical Specifications Issue 01 (2016-05-31)  Huawei Proprietary and Confidential         Copyright © Huawei Technologies Co., Ltd.16 4.2 Radio Specifications Table 4-2 Radio specifications Item  Description Antenna type Built-in dual-band smart antenna Antenna gain  2.4 GHz: 2dBi  5 GHz: 2.7dBi Maximum number of concurrent users ≤512 Maximum number of VAPs for each radio 16 Maximum transmit power  2.4 GHz: 26 dBm (combined power)  5 GHz: 27 dBm (combined power) NOTE The actual transmit power depends on local laws and regulations. You can adjust the transmit power from the maximum transmit power to 1 dBm, with a step of 1 dB. Maximum number of non-overlapping channels 2.4 GHz 802.11b/g  20 MHz: 3 802.11n  20 MHz: 3  40 MHz: 1 5 GHz  802.11a − 20 MHz: 13  802.11n − 20 MHz: 13 − 40 MHz: 6  802.11ac − 20MHz: 13 − 40MHz: 6− 80MHz: 3− 160MHz: 1 NOTE The table uses the number of non-overlapping channels supported by China as an example. The number of non-overlapping channels varies in different countries. For details, see the Country Codes & Channels ComplianceNOTICE If the AP is delivered to the USA, pay attention to the following on channel and frequency band usage. 1. The country code of the AP is fixed.2. High power radars working at frequencies in the range of 5.25 GHz to 5.35 GHz, 5.47 GHz to 5.6 GHz, and 5.65 GHz to 5.725 GHz can interfere with or even damage APs working at the same frequency.Channel rate supported  802.11b: 1, 2, 5.5, and 11 Mbit/s  802.11a/g: 6, 9, 12, 18, 24, 36, 48, and 54 Mbit/s  802.11n: 6.5 to 800 Mbit/s  802.11ac wave2: 6.5 to 1733.3 Mbit/s
AP7050DE Product Description  4 Technical Specifications Issue 01 (2016-05-31)  Huawei Proprietary and Confidential         Copyright © Huawei Technologies Co., Ltd.17 Item  Description Receiver sensitivity (Typical values) 2.4 GHz 802.11b  -104 dBm @ 1 Mbit/s  -100 dBm @ 2 Mbit/s  -100 dBm @ 5.5 Mbit/s  -97 dBm @ 11 Mbit/s 2.4 GHz 802.11g  -97 dBm @ 6 Mbit/s  -97 dBm @ 9 Mbit/s  -96 dBm @ 12 Mbit/s  -95 dBm @ 18 Mbit/s  -91 dBm @ 24 Mbit/s  -89 dBm @ 36 Mbit/s  -84 dBm @ 48 Mbit/s  -78 dBm @ 54 Mbit/s 2.4 GHz 802.11n (HT20)  -97 dBm @ MCS0 Mbit/s  -95 dBm @ MCS1 Mbit/s  -93 dBm @ MCS2 Mbit/s  -89 dBm @ MCS3 Mbit/s  -86 dBm @ MCS4 Mbit/s  -83 dBm @ MCS5 Mbit/s  -81 dBm @ MCS6 Mbit/s  -79 dBm @ MCS7 Mbit/s  -95 dBm @ MCS8 Mbit/s  -93 dBm @ MCS9 Mbit/s  -91 dBm @ MCS10 Mbit/s  -87 dBm @ MCS11 Mbit/s  -84 dBm @ MCS12 Mbit/s  -81 dBm @ MCS13 Mbit/s  -79 dBm @ MCS14 Mbit/s  -77 dBm @ MCS15 Mbit/s  -93 dBm @ MCS16 Mbit/s  -91 dBm @ MCS17 Mbit/s 2.4 GHz 802.11n(HT40)  -95 dBm @ MCS0 Mbit/s -92 dBm @ MCS1 Mbit/s -90 dBm @ MCS2 Mbit/s -87 dBm @ MCS3 Mbit/s -84 dBm @ MCS4 Mbit/s -80 dBm @ MCS5 Mbit/s -79 dBm @ MCS6 Mbit/s -77 dBm @ MCS7 Mbit/s -93 dBm @ MCS8 Mbit/s -90 dBm @ MCS9 Mbit/s -88 dBm @ MCS10 Mbit/s  -85 dBm @ MCS11 Mbit/s  -82 dBm @ MCS12 Mbit/s  -78 dBm @ MCS13 Mbit/s  -77 dBm @ MCS14 Mbit/s  -75 dBm @ MCS15 Mbit/s  -91 dBm @ MCS16 Mbit/s  -88 dBm @ MCS17 Mbit/s
AP7050DE Product Description  4 Technical Specifications Issue 01 (2016-05-31)  Huawei Proprietary and Confidential         Copyright © Huawei Technologies Co., Ltd.18 Item  Description  -89 dBm @ MCS18 Mbit/s  -85 dBm @ MCS19 Mbit/s  -82 dBm @ MCS20 Mbit/s  -79 dBm @ MCS21 Mbit/s  -77 dBm @ MCS22 Mbit/s  -75 dBm @ MCS23 Mbit/s  -91 dBm @ MCS24 Mbit/s  -89 dBm @ MCS25 Mbit/s  -87 dBm @ MCS26 Mbit/s  -83 dBm @ MCS27 Mbit/s  -80 dBm @ MCS28 Mbit/s  -77 dBm @ MCS29 Mbit/s  -75 dBm @ MCS30 Mbit/s  -73 dBm @ MCS31 Mbit/s  -86 dBm @ MCS18 Mbit/s  -83 dBm @ MCS19 Mbit/s  -80 dBm @ MCS20 Mbit/s  -76 dBm @ MCS21 Mbit/s  -75 dBm @ MCS22 Mbit/s  -73 dBm @ MCS23 Mbit/s  -89 dBm @ MCS24 Mbit/s  -86 dBm @ MCS25 Mbit/s  -84 dBm @ MCS26 Mbit/s  -81 dBm @ MCS27 Mbit/s  -78 dBm @ MCS28 Mbit/s  -74 dBm @ MCS29 Mbit/s  -73 dBm @ MCS30 Mbit/s  -71 dBm @ MCS31 Mbit/s 5 GHz 802.11a  -97 dBm @ 6 Mbit/s  -97 dBm @ 9 5 GHz 802.11n (HT20) -97 dBm @ MCS0 Mbit/s -94 dBm @ 5 GHz 802.11n (HT40)  -94 dBm @ MCS0 Mbit/s  -91 dBm @ -
AP7050DE Product Description  4 Technical Specifications Issue 01 (2016-05-31)  Huawei Proprietary and Confidential         Copyright © Huawei Technologies Co., Ltd.19 Item  Description Mbit/s  -95 dBm @ 12 Mbit/s  -93 dBm @ 18 Mbit/s  -89 dBm @ 24 Mbit/s  -86 dBm @ 36 Mbit/s  -83 dBm @ 48 Mbit/s  -79 dBm @ 54 Mbit/s MCS1 Mbit/s -92 dBm @ MCS2 Mbit/s -87 dBm @ MCS3 Mbit/s -83 dBm @ MCS4 Mbit/s -81 dBm @ MCS5 Mbit/s -80 dBm @ MCS6 Mbit/s -78 dBm @ MCS7 Mbit/s -95 dBm @ MCS8 Mbit/s -92 dBm @ MCS9 Mbit/s -90 dBm @ MCS10 Mbit/s  -85 dBm @ MCS11 Mbit/s  -81 dBm @ MCS12 Mbit/s  -79 dBm @ MCS13 Mbit/s  -78 dBm @ MCS14 Mbit/s  -76 dBm @ MCS15 Mbit/s  -93 dBm @ MCS16 Mbit/s  -90 dBm @ MCS17 Mbit/s  -88 dBm @ MCS18 Mbit/s  -83 dBm @ MCS19 Mbit/s MCS1 Mbit/s  -88 dBm @ MCS2 Mbit/s  -84 dBm @ MCS3 Mbit/s  -81 dBm @ MCS4 Mbit/s  -77 dBm @ MCS5 Mbit/s  -75 dBm @ MCS6 Mbit/s  -74 dBm @ MCS7 Mbit/s  -92 dBm @ MCS8 Mbit/s  -89 dBm @ MCS9 Mbit/s  -86 dBm @ MCS10 Mbit/s  -82 dBm @ MCS11 Mbit/s  -79 dBm @ MCS12 Mbit/s  -75 dBm @ MCS13 Mbit/s  -73 dBm @ MCS14 Mbit/s  -72 dBm @ MCS15 Mbit/s  -90 dBm @ MCS16 Mbit/s  -87 dBm @ MCS17 Mbit/s  -84 dBm @ MCS18 Mbit/s  -80 dBm @ MCS19 Mbit/s
AP7050DE Product Description  4 Technical Specifications Issue 01 (2016-05-31)  Huawei Proprietary and Confidential         Copyright © Huawei Technologies Co., Ltd.20 Item  Description  -79 dBm @ MCS20 Mbit/s  -77 dBm @ MCS21 Mbit/s  -76 dBm @ MCS22 Mbit/s  -74 dBm @ MCS23 Mbit/s  -91 dBm @ MCS24 Mbit/s  -88 dBm @ MCS25 Mbit/s  -86 dBm @ MCS26 Mbit/s  -81 dBm @ MCS27 Mbit/s  -77 dBm @ MCS28 Mbit/s  -75 dBm @ MCS29 Mbit/s  -74 dBm @ MCS30 Mbit/s  -72 dBm @ MCS31 Mbit/s  -77 dBm @ MCS20 Mbit/s  -73 dBm @ MCS21 Mbit/s  -71 dBm @ MCS22 Mbit/s  -70 dBm @ MCS23 Mbit/s  -88 dBm @ MCS24 Mbit/s  -85 dBm @ MCS25 Mbit/s  -82 dBm @ MCS26 Mbit/s  -78 dBm @ MCS27 Mbit/s  -75 dBm @ MCS28 Mbit/s  -71 dBm @ MCS29 Mbit/s  -69 dBm @ MCS30 Mbit/s  -68 dBm @ MCS31 Mbit/s 5 GHz 802.11ac (VTH20)  -97 dBm @ MCS0NSS1 Mbit/s  -94 dBm @ MCS1NSS1 Mbit/s  -92 dBm @ MCS2NSS1 5 GHz 802.11ac (VTH40)  -94 dBm @ MCS0NSS1 Mbit/s  -91 dBm @ MCS1NSS1 Mbit/s  -88 dBm @ MCS2NSS1 5 GHz 802.11ac (VTH80)  -90 dBm @ MCS0NSS1 Mbit/s  -87 dBm @ MCS1NSS1 Mbit/s  -84 dBm @ MCS2NSS1 5 GHz 802.11ac (VTH160)  -85 dBm @ MCS0NSS1 Mbit/s  -82 dBm @ MCS1NSS1 Mbit/s  -80 dBm @ MCS2NSS1
AP7050DE Product Description  4 Technical Specifications Issue 01 (2016-05-31)  Huawei Proprietary and Confidential         Copyright © Huawei Technologies Co., Ltd.21 Item  Description Mbit/s  -87 dBm @ MCS3NSS1 Mbit/s  -83 dBm @ MCS4NSS1 Mbit/s  -81 dBm @ MCS5NSS1 Mbit/s  -80 dBm @ MCS6NSS1 Mbit/s  -77 dBm @ MCS7NSS1 Mbit/s  -76 dBm @ MCS8NSS1 Mbit/s  -95 dBm @ MCS0NSS2 Mbit/s  -92 dBm @ MCS1NSS2 Mbit/s  -90 dBm @ MCS2NSS2 Mbit/s  -85 dBm @ MCS3NSS2 Mbit/s  -81 dBm @ MCS4NSS2 Mbit/s  -79 dBm @ MCS5NSS2 Mbit/s  -78 dBm @ MCS6NSS2 Mbit/s  -75 dBm @ MCS7NSS2 Mbit/s  -74 dBm @ MCS8NSS2 Mbit/s  -93 dBm @ MCS0NSS3 Mbit/s  -84 dBm @ MCS3NSS1 Mbit/s  -81 dBm @ MCS4NSS1 Mbit/s  -77 dBm @ MCS5NSS1 Mbit/s  -75 dBm @ MCS6NSS1 Mbit/s  -74 dBm @ MCS7NSS1 Mbit/s  -73 dBm @ MCS8NSS1 Mbit/s  -72 dBm @ MCS9NSS1 Mbit/s  -92 dBm @ MCS0NSS2 Mbit/s  -89 dBm @ MCS1NSS2 Mbit/s  -86 dBm @ MCS2NSS2 Mbit/s  -82 dBm @ MCS3NSS2 Mbit/s  -79 dBm @ MCS4NSS2 Mbit/s  -75 dBm @ MCS5NSS2 Mbit/s  -73 dBm @ MCS6NSS2 Mbit/s  -72 dBm @ MCS7NSS2 Mbit/s  -70 dBm @ MCS8NSS2 Mbit/s  -80 dBm @ MCS3NSS1 Mbit/s  -77 dBm @ MCS4NSS1 Mbit/s  -73 dBm @ MCS5NSS1 Mbit/s  -71 dBm @ MCS6NSS1 Mbit/s  -70 dBm @ MCS7NSS1 Mbit/s  -68 dBm @ MCS8NSS1 Mbit/s  -67 dBm @ MCS9NSS1 Mbit/s  -88 dBm @ MCS0NSS2 Mbit/s  -85 dBm @ MCS1NSS2 Mbit/s  -82 dBm @ MCS2NSS2 Mbit/s  -78 dBm @ MCS3NSS2 Mbit/s  -75 dBm @ MCS4NSS2 Mbit/s  -71 dBm @ MCS5NSS2 Mbit/s  -69 dBm @ MCS6NSS2 Mbit/s  -68 dBm @ MCS7NSS2 Mbit/s  -65 dBm @ MCS8NSS2 Mbit/s  -76 dBm @ MCS3NSS1 Mbit/s  -73 dBm @ MCS4NSS1 Mbit/s  -68 dBm @ MCS5NSS1 Mbit/s  -67 dBm @ MCS6NSS1 Mbit/s  -66 dBm @ MCS7NSS1 Mbit/s  -62 dBm @ MCS8NSS1 Mbit/s  -60 dBm @ MCS9NSS1 Mbit/s  -83 dBm @ MCS0NSS2 Mbit/s  -80 dBm @ MCS1NSS2 Mbit/s  -78 dBm @ MCS2NSS2 Mbit/s  -74 dBm @ MCS3NSS2 Mbit/s  -71 dBm @ MCS4NSS2 Mbit/s  -66 dBm @ MCS5NSS2 Mbit/s  -65 dBm @ MCS6NSS2 Mbit/s  -64 dBm @ MCS7NSS2 Mbit/s  -60 dBm @ MCS8NSS2
AP7050DE Product Description  4 Technical Specifications Issue 01 (2016-05-31)  Huawei Proprietary and Confidential         Copyright © Huawei Technologies Co., Ltd.22 Item  Description Mbit/s  -90 dBm @ MCS1NSS3 Mbit/s  -88 dBm @ MCS2NSS3 Mbit/s  -83 dBm @ MCS3NSS3 Mbit/s  -79 dBm @ MCS4NSS3 Mbit/s  -77 dBm @ MCS5NSS3 Mbit/s  -76 dBm @ MCS6NSS3 Mbit/s  -73 dBm @ MCS7NSS3 Mbit/s  -72 dBm @ MCS8NSS3 Mbit/s  -70 dBm @ MCS9NSS3 Mbit/s  -91 dBm @ MCS0NSS4 Mbit/s  -88 dBm @ MCS1NSS4 Mbit/s  -86 dBm @ MCS2NSS4 Mbit/s  -81 dBm @ MCS3NSS4 Mbit/s  -77 dBm @ MCS4NSS4 Mbit/s  -75 dBm @ MCS5NSS4 Mbit/s  -74 dBm @ MCS6NSS4 Mbit/s  -69 dBm @ MCS9NSS2 Mbit/s  -90 dBm @ MCS0NSS3 Mbit/s  -87 dBm @ MCS1NSS3 Mbit/s  -84 dBm @ MCS2NSS3 Mbit/s  -80 dBm @ MCS3NSS3 Mbit/s  -77 dBm @ MCS4NSS3 Mbit/s  -73 dBm @ MCS5NSS3 Mbit/s  -71 dBm @ MCS6NSS3 Mbit/s  -70 dBm @ MCS7NSS3 Mbit/s  -67 dBm @ MCS8NSS3 Mbit/s  -66 dBm @ MCS9NSS3 Mbit/s  -88 dBm @ MCS0NSS4 Mbit/s  -85 dBm @ MCS1NSS4 Mbit/s  -82 dBm @ MCS2NSS4 Mbit/s  -78 dBm @ MCS3NSS4 Mbit/s  -75 dBm @ MCS4NSS4 Mbit/s  -64 dBm @ MCS9NSS2 Mbit/s  -86 dBm @ MCS0NSS3 Mbit/s  -83 dBm @ MCS1NSS3 Mbit/s  -80 dBm @ MCS2NSS3 Mbit/s  -76 dBm @ MCS3NSS3 Mbit/s  -73 dBm @ MCS4NSS3 Mbit/s  -69 dBm @ MCS5NSS3 Mbit/s  -66 dBm @ MCS7NSS3 Mbit/s  -64 dBm @ MCS8NSS3 Mbit/s  -63 dBm @ MCS9NSS3 Mbit/s  -84 dBm @ MCS0NSS4 Mbit/s  -81 dBm @ MCS1NSS4 Mbit/s  -78 dBm @ MCS2NSS4 Mbit/s  -74 dBm @ MCS3NSS4 Mbit/s  -71 dBm @ MCS4NSS4 Mbit/s  -67 dBm @ MCS5NSS4 Mbit/s  -58 dBm @ MCS9NSS2 Mbit/s
AP7050DE Product Description  4 Technical Specifications Issue 01 (2016-05-31)  Huawei Proprietary and Confidential         Copyright © Huawei Technologies Co., Ltd.23 Item  Description Mbit/s  -71 dBm @ MCS7NSS4 Mbit/s  -70 dBm @ MCS8NSS4 Mbit/s Mbit/s  -71 dBm @ MCS5NSS4 Mbit/s  -69 dBm @ MCS6NSS4 Mbit/s  -68 dBm @ MCS7NSS4 Mbit/s  -65 dBm @ MCS8NSS4 Mbit/s  -64 dBm @ MCS9NSS4 Mbit/s Mbit/s  -65 dBm @ MCS6NSS4 Mbit/s  -64 dBm @ MCS7NSS4 Mbit/s  -62 dBm @ MCS8NSS4 Mbit/s  -61 dBm @ MCS9NSS4 Mbit/s  4.3 Standards Compliance Safety standards  UL 60950–1  CAN/CSA 22.2 No.60950-1  IEC 60950–1  EN 60950–1  GB 4943 Radio Standards  ETSI EN 300 328  ETSI EN 301 893    FCC Part 15C: 15.247  FCC Part 15C: 15.407    RSS-210  AS/NZS 4268 EMC standards  EN 301 489–1  EN 301 489–17  ETSI EN 60601-1-2    FCC Part 15  ICES-003
AP7050DE Product Description  4 Technical Specifications Issue 01 (2016-05-31)  Huawei Proprietary and Confidential         Copyright © Huawei Technologies Co., Ltd.24  YD/T 1312.2-2004  ITU k.20  GB 9254  GB 17625.1  AS/NZS CISPR22  EN 55022  EN 55024  CISPR 22  CISPR 24  IEC61000-4-6  IEC61000-4-2 IEEE Standards  IEEE 802.11a/b/g  IEEE 802.11n  IEEE 802.11ac  IEEE 802.11h  IEEE 802.11d  IEEE 802.11e Security standards  802.11i, Wi-Fi Protected Access 2 (WPA2), and WPA  802.1X  Advanced Encryption Standards (AES) and Temporal Key Integrity Protocol (TKIP)  EAP Type (s) EMF  CENELEC EN 62311  CENELEC EN 50385  OET65  RSS-102  FCC Part1&2  FCC KDB RoHS  Directive 2002/95/EC & 2011/65/EU Reach  Regulation 1907/2006/EC WEEE  Directive 2002/96/EC & 2012/19/EU
AP7050DE Product Description  4 Technical Specifications Issue 01 (2016-05-31)  Huawei Proprietary and Confidential         Copyright © Huawei Technologies Co., Ltd.25 FCC Statement  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:  —Reorient or relocate the receiving antenna.   —Increase the separation between the equipment and receiver.   —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.   —Consult the dealer or an experienced radio/TV technician for help.   FCC Radiation Exposure Statement    This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and consider removing the no-collocation statement.    This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:   (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.   Caution!     Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Navigation menu