Horizon Hobby DAMTX12 2.4 GHz Transceiver Module User Manual X1TXP User Guide

Horizon Hobby, LLC 2.4 GHz Transceiver Module X1TXP User Guide

Contents

Users Manual

 Page 1 of 4  X1TXP 2.4GHz DSSS Module User Manual.  Horizon Hobby Inc., 4105 Fieldstone Rd Champaign, IL 61822 (408) 203 4408 1. Features   2.4GHz Direct Sequence Spread Spectrum (DSSS) radio transceiver module.  Operates in the unlicensed worldwide ISM band (2.4 GHz to 2.483.5GHz) band  Fully integrated power regulation with a wide input unregulated operating range 3V to 10V.  Fully integrated local oscillator and 12MHz 20ppm reference crystal  200mA operating current  Transmit power - 100mW EIRP  Receive sensitivity up to -95dBm  DSSS data rates up to 250kbps  1 mile operating range  Full packet assembling and disassembling  Auto transaction sequencer  Fully buffered digital interface with high voltage tolerant inputs  2. Pin description  Pin Number  Name  Description 1 GND Module Ground 2  VCE  Power control monitoring 3  VIN  Module DC Power 4  P21  Baseband CPU digital port P2.1 5  P33  Baseband CPU digital port P3.3 6  P17  Baseband CPU digital port P1.7 7  P32  Baseband CPU digital port P3.2 8 GND Module Ground 9  P30  Baseband CPU digital port P3.0 10  XRES  Baseband CPU reset input 11  P11  Baseband CPU digital port P1.1 12  P10  Baseband CPU digital port P1.0
 Page 2 of 4  3. Specifications  Parameter Value Units Storage Temp  -65 to 105  Degrees Celsius VDD  2.4 to 3.6  Volts Receive Sensitivity  -95  dBm Transmit power (conducted)  18.5  dBm MAX Transmit power (radiated)  20  dBm MAX Idle current  1  mA Receive current  22  mA Transmit current  200  mA  4. Module User Requirements  4.1 This module must be integrated into a device where the user cannot access the antenna connector.  4.2 Only a 2.0dBi antenna can be used with this module. The antenna must meet and not exceed the gain and pattern of the supplied folded dipole antenna.  4.3 The device must contain the following permanent labeling on the exterior of the device as follows:    Contains FCC ID: BRWDAMTX12  4.4 The user manual of the device must contain the following paragraph:
 Page 3 of 4 FCC Information This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IC Information This device complies with Industry Canada license-exempt RSS standard(s).  Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.   CE Information   This product contains a radio transmitter with wireless technology which has been tested and found to be compliant with the applicable regulations governing a radio transmitter in the 2.400 GHz to 2.4835 GHz frequency range. The following countries associated regulatory agencies recognizing the noted certifications for this product as authorized for sale and use are: UK DE DK NO SE  FI EE LV LT PL
 Page 4 of 4  4.5 This module meets the requirements for a mobile device that may be used at separation distances of more than 20cm from the human body. It may be used in hand-held controllers that provide a separation distance of at least 5cm between the antenna and the body (excluding hands/wrists). The instructions to the user for the host device must include information requiring the product be used in a manner to ensure the appropriate separation (20cm or 5cm) between antenna and body and requiring that the transmitter not be collocated with another transm

Navigation menu