Honeywell MLPN5600A Terminal User Manual SP5600 User s Manual

Honeywell International Inc. Terminal SP5600 User s Manual

Users manual

i SP5600 Terminal User's Guide Version 1.00
iiTable of Contents Table of Contents .................................................................................................................................ii 1. Preface..........................................................................................................................................1 2. General Features and Characteristics...........................................................................................2 2.1 Electrical ......................................................................................................................2 2.2 Environmental..............................................................................................................2 2.3 Physical........................................................................................................................2 2.4 CPU..............................................................................................................................2 2.5 Memory........................................................................................................................2 2.6 Reader ..........................................................................................................................2 2.7 Display.........................................................................................................................3 2.8 Keypad .........................................................................................................................3 2.9 Indicator .......................................................................................................................3 2.10 Communication............................................................................................................3 2.11 802.11b/g WLAN Specification...................................................................................3 2.12 Software .......................................................................................................................3 3. Software Architecture ..................................................................................................................4 3.1 Kernel & Application Manager....................................................................................4 3.2 System..........................................................................................................................5 3.3 Application.................................................................................................................10 3.4 Programming the terminal .........................................................................................10 3.5 Programming the communication cradle...................................................................10 4. Operations..................................................................................................................................11 4.1 Keypad operations......................................................................................................11 4.2 Application mode.......................................................................................................11 4.3 System mode..............................................................................................................12 4.4 Kernel mode...............................................................................................................12 4.5 Application Manager..................................................................................................12 低功率電波輻射性電機管理辦法 第十二條 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者不得擅自 變更頻率、加大功率或變更原設計之特性及功能。 第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象 時，應立即停用，並改善至吳干擾時方得繼續使用。 前項合法通信，指依電信法規定作業之無線電通信。 低功率射頻電機需忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。
11. Preface The SP5600 terminal is rugged, versatile, high performance data terminals designed for all-day, everyday use. It is powered by a Li-ion rechargeable battery with working time longer than 16 hours. It is supported by a rich set of development tools, including a Windows-based application generator, “C” and “Basic” compilers. With its integrated Laser/CCD barcode scanning unit and 802.11b/g WLAN module, the SP5600 terminal is ideal for real time applications such as inventory control, shop floor management, warehousing and distribution operations. CAUTION : RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCT Battery disposal For green-environment issue it's important that batteries should be recycled in a proper way. FCC Regulations: zThis device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. zThis device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. It only operated in hand-held used. If you only transfer data to Host by WLAN, please keep the minimum distance 20cm between machine & your body.
22. General Features and Characteristics Basic characteristics of the SP5600 Terminal are listed below, 2.1 Electrical y Operation battery: 3.7V Li-ion rechargeable battery, 1800mAH y Backup battery: 3.0V, 7mAH rechargeable Lithium battery for SRAM & calendar y Working time: 16 hours 2.2 Environmental y Operating Humidity: non-condensed 10% to 90% y Storage Humidity: non-condensed 5% to 95% y Operating Temperature: 0 to 50 °C y Storage Temperature: -20 to 70 °C y EMC regulation: FCC, CE and C-tick y Shock resistance: 1.2m drop onto concrete y IP rating: IP65 2.3 Physical y Dimensions:170mm (L) x 80mm (W) x 44mm (H) y Weight: 250g (including battery) y Color: Black y Material: ABS 2.4 CPU y Toshiba 16-bit CMOS type CPU y Tunable clock, up to 22MHz 2.5 Memory Program memory y 1 M Bytes flash memory is used to store the program code, font, constant data, and so on. Data memory y 256K Bytes SRAM 2.6 Reader The Terminal can be equipped with either Laser or Long Range CCD scanner. Detailed specifications are as follows: SP5600 (Laser) y Light source: visible Laser diode operating at 670±15nm y Scan rate: 36±3 scans per second y Scan angle: 42°nominal y Minimum print contrast: 20% absolute dark/light reflectance at 670nm y Depth of field: 5 ~ 95 cm, depends on barcode resolution SP5600 (CCD)
3y Resolution: 0.125mm ~ 1.00mm y Depth of field: 2 ~ 20cm y Width of field: 45mm ~ 124mm y Scan rate: 100 scans/sec y Ambient Light Rejection: 1200 lux (Direct Sun-light) 2500 lux (Fluorescent Light) 2.7 Display y 100x64 graphic dots FSTN LCD display with LED back-light 2.8 Keypad y 24 numeric rubber keys. 2.9 Indicator Buzzer y Software programmable audio indicator, 1KHz to 4KHz, low power transducer type. LED y Programmable, dual-color (green and red) LED for status indication. 2.10 Communication y RS-232: Baud rate up to 115200bps y Serial IR: Baud rate up to 115200bps y Standard IrDA: Standard 1.0 compatible. Baud rate up to 115200bps 2.11 802.11b/g WLAN Specification SP5600 Terminal y Frequency Range: 2.4 ~ 2.4835 GHz, unlicensed ISM Band y Modulation: DSSS with DBPSK, DQPSK, and CCK OFDM with BPSK, QPSK, QAM, and 64QAM y Data Rate: 11 / 54 Mbps Auto-fallback y Channels: Standard y Coverage: 100M line-of-sight y Maximum Output Power: 49mW / 22 mWy Compliance: IEEE 802.11b/g & Wi-Fi compliance Access Point y Works with commercially available standard IEEE 802.11b/g Access Point 2.12 Software y Operating System: CipherLab proprietary OS y Programming Tools: “C” compiler, BASIC compiler and a Windows-based Application Generator
43. Software Architecture The Terminal system software consists of three modules: the kernel & Application Manager module, the System module and the Application module. 3.1 Kernel & Application Manager The kernel is the innermost core of the system. It has the highest security and is always protected by the system. Only the failure of flash memory or improperly power off during system restart after updating kernel will the kernel be destroyed. The kernel module ensures that users can always download their application program even the operating system was crashed by the user’s program. The kernel provides the following services: y Kernel Information Information includes hardware version, serial number, manufacturing date, kernel version and hardware configurations. y Load Application To download the application program, BASIC run-time or font files. y Kernel Update Sometimes the kernel might be changed for improving performance or other reasons. This function allows you to keep the kernel updated. The update procedure is same as download user program, but note that after updating the kernel, please do not power off until the system restart itself. y Test & Calibrate To perform a burn-in test and tune the system clock. This function is for manufacturing purpose only. Besides the kernel menu, if there is no application program exists, then upon power up the terminal the following Application Manager’s menu will be shown: y Download To download application programs (*.SHX), BASIC run-time (BC83x0.SHX), BASIC programs (*.SYN) or font files (8xxx-XX.SHX) to the terminal. There are 6 resident locations and one Active Memory, i.e. at most 7 programs can be downloaded to the terminal. But only the one downloaded to the Active Memory will be activated and running. To run other programs, they need to be activated first, but only one at a time. Right after downloading, you can input a name for the program or just press the enter key to keep its current name if there is. And then the downloaded program’s type, name and size will be shown on the list when entering the Download or Activate menu of the Application Manager. The file type is a small letter follows the program number (01~06), it can be either ‘b’, ‘c’ or ‘f’ which represents BASIC program, C program or font file respectively. The program name is up to 12 characters and the program size is in unit of K bytes. y Activate To copy one of the 6 resident programs to the Active Memory to make it become the active program. After activating, the original program in the Active Memory will be replaced by the new one. Note a font file cannot be activated, and a BASIC program cannot be activated either if the BASIC run-time does not exist. y Upload To transmit the application programs to a host PC or another terminal. The function allows a
5terminal to be cloned without going through a PC. 3.2 System The system module provides the following services: y Information The system information includes hardware version, serial number, manufacturing date, kernel version, C library or BASIC run-time version, application program version and hardware configurations. y Settings The system settings include the following: 1. Clock Set date and time for the system. 2. Backlight ON Period Set the staying on duration for the keyboard and LCD backlight. Default: the lights go off after 20 seconds. 3. CPU Speed Set CPU running speed. There are five speeds available: Full speed, half speed, quarter speed, eighth speed and sixteenth speed. Default: Full speed 4. Auto Off Set time threshold for automatically power off when no operation is taking place during that specified period. If this value is set to zero, this function will be disabled. Default: 10 minutes 5. Power On Options There are two possible selections: Program Resume, which starts from the program being used during the last session before the last power-off; and Program Restart, which starts with a new program. Default: Program Resume 6. Key Click Select a tone for the beeper or disable the beeper when the user presses a key button. Default: Enable 7. System Password Set a password to protect the user from entering the system menu. Default: no password is set 8. Font This option will display the current font file name and version. Languages can be selected by pressing “arrow up” or “arrow down” key if multi-font file is downloaded. Supported languages in multi-font file: [16] System Font [17] French [18] Hebrew [19] Latin [20] Nordic
6[21] Portugal [22] Russian [23] Slavic [24] Polish [25] Turkish [26] Slovak(CP1250) Default: System Font y Tests 1. Reader To test the reading performance of the scanner. The following barcodes are default to enable: Code 39 Industrial 25 Interleave 25 Codabar Code 93 Code 128 UPCE UPCE with ADDON 2 UPCE with ADDON 5 EAN8 EAN8 with ADDON 2 EAN8 with ADDON 5 EAN13 EAN13 with ADDON 2 EAN13 with ADDON 5 Other barcodes must be enabled through programming. 2. Buzzer To test the buzzer with different Frequency/Duration. Press ENTER key to start and then press any key to stop the test. 3. LCD & LED To test LCD display and LED indicator. Press ENTER key to start and then press any key to stop the test. 4. Keyboard To test the rubber keys. Press a key and the result will be shown on the LCD display. Note that the FN key should be used in conjunction with numeral keys. 5. Memory To test the data memory (SRAM). Note after the test, the contents of the memory space will be wiped out. y Memory 1. Size Information Information includes sizes of the base memory (SRAM), memory card (SRAM) and program memory (FLASH) in the unit of kilobytes.
72. Initialize To initialize the data memory (SRAM). Note the contents of the data space will be wiped out after memory initialization. y Power Show the voltages of the main battery and backup battery. y Load Application To download the application program, BASIC run-time or font file. There are three interfaces supported by the system, namely, the Direct-RS232, Cradle-IR and standard IrDA. Download.exe is required when Direct RS232 or standard IrDA interface is used. And IrLoad.exe is required when Cradle-IR is used. y 802.11b/g Menu This item will be displayed only if an 802.11b/g module is installed. 1. Information It includes the WLAN LIB version, MAC ID, DHCP status, IP address, Subnet Mask, and Gateway. 2. IP Settings DHCP Server will dynamically assign the following IP settings to the terminal if DHCP Server is installed and the option is enabled. These IP Settings also can be configured manually if DHCP is disabled. Please contact your MIS engineer if you don’t know how to configure it. 1). DHCP DHCP stands for Dynamic Host Configuration Protocol. Default: [1] Enable 2). SubNet Mask The number used to identify the IP sub-network, indicating whether the IP address can be recognized on the LAN. Default: 255.255.128.0 3). Local IP Address The address which identifies a location of the terminal on the network must be unique. Default: 0.0.0.0 4). Default Gateway the Gateway IP address is the IP address of a local router in between the forwarding node and the remote network. Default: 0.0.0.0 5). DNS Server Domain Name Server is a distributed, replicated, data query service mainly used on the Internet for translating host names to IP addresses. Default: 0.0.0.0 3. WLAN Settings
8The RF settings and their default values are as follows, 1). Local Name Specify name for terminal SP5600 Default: the S/N of the SP5600 terminal 2). Domain Name The domain name locates the organization or other entity on the Internet. Default: <None> 3). SS ID The SSID is a 32-character (maximum) string identifying the wireless local area network. All APs & terminals within the same service set should have the same SSID. Default: <None> 4). System Scale This option which depends on the Access Point Density determines when the terminal should look for other Access Point that has bigger signal strength. [1] Low [2] Medium [3] High Default: [2] Medium 5). Power Saving Wireless products can be put in lower power consumption mode when “Power Saving” is enabled. Default: [1] Enable 6). Preamble Select either a short preamble or long preamble. Select a short preamble for SP5600 terminal with high network traffic; select a long preamble when the network traffic is low. Default: [1] Long 4. Security 1). Authentication 802.11b/g supports two subtypes of network authentication services: open system and shared key. Open system authentication is used when no authentication is required. Under Share Key Authentication, it involves a shared secret key to authenticate the station to the AP(access point). WEP must be implemented to utilize this. [0] Share Key [1] Open System Default: [1] Open System 2). WEP Menu  WEP Setting Wireless Equivalent Privacy (WEP) is an encryption to translate data into a secret
9code. It provides wireless clients with confidentiality and authentication in an IEEE 802.11b/g environment. [0] Disable [1] Enable Default: [0] Disable  WEPKey Length When WEP is enabled, Data sent between the client and the access point is scrambled using either a 64-bit or 128-bit key. The higher the level of encryption, the more secure it is. [0] 64 bits [1] 128 bits Default: [1] 128 bits  Default Key Activate one of the four encryption keys Default: [1] WEP KEY1  WEP Key Define the encryption key values for Key1~Key4 using hexadecimal digits. When WEPKey Length “64 Bit” is selected, the user is required to fill in 5 bytes of hexadecimal values as the encryption key. When WEPKey Length “128 Bit” is selected, the user is required to fill in 13 bytes of hexadecimal values as the encryption key. 3). EAP Menu EAP Stands for Extensible Authentication Protocol. SP5600 terminal only support EAP-MD5. When these features are implemented, a wireless client that associates with an access point cannot gain access to the network until the user performs a network logon. Therefore, Identity and Password are needed when EAP is enabled.  EAP Setting  EAP ID  EAP Password 5. Echo Tests The terminal will echo the received data from the client or server and also signals a beep. The function is used to measure the coverage of the range, estimate the number of APs and terminals needed, and determine the AP’s deployment topology. 1. Client Mode 2. Server Mode Cipherlab provides TCPServer.exe (only for Client Mode) and TCPDemo.exe for Echo Tests.
10Once the connection of Echo Test is established, the details will be displayed as the illustration below. 3.3 Application The Application module runs on top of the System module. The SP5600 Terminal is preloaded with the Application Generator’s run-time program and the following menu will be shown upon powering the unit up: y 1. Take data y 2. Utilities The arrow keys can be used to select the menu item, and execute it by pressing the ENTER key. Note if you use the Application Generator to create your application program, you need to download it to the terminal. And for RF models, you need to use the RF Database Manager to handle the in-coming and out-going data to and from the PC. For detailed information, please refer to SP5600 Application Generator User’s Guide” and “RF Application Generator User’s Guide”. 3.4 Programming the terminal There are three software tools available for developing application programs for the terminal. 1. The Application Generator 2. The “BASIC” Compiler 3. The “C” Compiler Besides, Terminal Emulation program which supports ANSI (VT100& VT220) and IBM is also available. For detailed information, please contact Syntech Information Co., Ltd. 3.5 Programming the communication cradle The communication cradle of the SP5600 Portable Data Terminal supports serial IR interface only. Before your PC application starts to communicate with the terminal via its cradle, first you need to configure the cradle through programming. There is a DLL available for this purpose. For more information, please contact your supplier .Syntech Information Co., Ltd. Sending 033 Recv ok 033 Q: 0070 T: 11M S: 0133 N: 0006
114. Operations Batteries must be fresh and properly loaded before start operation. 4.1 Keypad operations The Terminals have two keyboard layouts: 24 rubber keys. The functions of some special keys are as follows: SCAN Scan a barcode. Press this button will trigger the scanner to read a barcode if the scanner port is enabled. ENTER Enter. There are two enter keys on the side of the scan key. Normally the enter keys are used for command execution or input confirmation. ESC Escape. Usually this key is used to stop and exit current operation. BS Back Space. If this key is being pressed down longer than one second, a clear code will be sent. ALPHA / α The toggle key for Alphabet / Numeral input. When the system is in alpha-mode, a small icon will be shown on the display. For the 24-key keyboard, each numeral key can be used to generate one of the three capital letters. For example, numeral 2 can be used to produce A, B or C. Pressing the same key twice within one second, will call the letter B. Pressing the same key without halting longer than one second, will cause the three letters to be shown in a circulating way. Only when stop pressing the key for longer than one second or pressing another key, will the system send the real key code to the application program. Pressing the “Alpha” key again, lower case letter can be inputted. FN The function key. This key cannot be activated alone, it must be pressed with one numeral key at the same time. For example, FN + 1 generates function #1, FN + 2 generates function #2, etc (up to 9 functions). Also, this key can be combined with the UP/DOWN arrow keys to adjust the contrast of the LCD. And when this key is combined with the ENTER key, it will turn ON/OFF the backlight. POWER Power On/Off. To prevent a faulty push, it needs about 1.5 sec continuous pressing to turn On/Off the power. 4.2 Application mode This is the default operation mode when turning on the power. The operation depends on the application module. Please refer to section 4.4.
124.3 System mode To enter the system menu, you need to press the 7, 9 and POWER keys simultaneously upon power up the terminal. For details of the services provided by the system, please refer to section 4.2. 4.4 Kernel mode To enter the kernel menu, you need to press 7, 9 and POWER keys simultaneously to enter the system menu first, then power off the unit and press 1, 7 and POWER key simultaneously. Or if the battery is just reloaded, then press 1, 7 and POWER key simultaneously will directly go to the kernel. For details of the services provided by the kernel, please refer to section 4.1. 4.5 Application Manager Although the Application Manager is part of the kernel, to enter it, you need to press ‘8’ and POWER key simultaneously. Or if the application program does not exist, the unit will automatically go to the Application Manager’s menu upon power up. The three services: Download, Activate and Upload provided by the Application Manager are explained in Section 4.1. But what if you need to update a program or delete it? For both cases, you need to select the Download menu and select the program to be updated or deleted. The Application Manager then shows the selected program’s information such as Program Name, Download Time, Used and Free Flash memory. And then please input ‘C’ to update the selected program, or input ‘D’ to delete it.

Navigation menu