Hisense Electric LCDF0054 LED LCD TV User Manual W9HLCDF0054 1

Hisense Electric Co., Ltd. LED LCD TV W9HLCDF0054 1

UserManual.wiki >

Hisense Electric >

LCDF0054 User Manual >

W9HLCDF0054_User Manual_1

Contents

1. W9HLCDF0054_User Manual_1
2. W9HLCDF0054_User Manual_2

W9HLCDF0054_User Manual_1

EnglishES-A150203

Disclaimer Page**Notwithstanding anything to the contrary, including in any or all descriptions, representations, statements or other communications related to this Hisense device (hereinafter “Device”) made in any form whatsoever and at any time, some or all of the pre-installed, or subsequently installed Application Services may not be available or capable of functioning as intended by the provider of the Application Services in any or all usage areas for reasons outside of Hisense’s control, including but not limited to, Internet access, local service limitations, etc. Any purchase or use of the Device, including any Application Services, is purely at the user’s risk. Application Services are provided on an as-available basis without warranties of any kind, either expressed or implied, that the Application Service will be uninterrupted or error-free, including but not limited to vagaries of weather, disruption of Service, acts of God, warranties of title, local or regional limitations, no infringement, NOR IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. No advice or information given by Hisense, providers, affiliates, or contractors or their respective employees shall create such a warranty. Hisense specifically disclaims responsibility for any or all Application Services from functioning at any time, and by purchasing the Device, you accept such disclaimer without any claim on Hisense. You are solely responsible for providing an active and working connection to the Internet, along with any and all hardware and/or software necessary to use the Hisense Device as intended.

AIf you are not sure of your ability to complete the installation, then contact the wall-mount manufacturer or the retailer from which you purchased the T V.

BImportant Safety Instructions1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instructions.5. Do not use this apparatus near water.6. Clean only with dry cloth.7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.11. Only use attachments/accessories specified by the manufacturer.12. Use only with cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.13. Unplug this apparatus during lightning storms or when unused for long periods of time.14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.15. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.16. Warning: the apparatus with Class I construction shall be connected to a MAINS socket outlet with a protective earthing connection.17. To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions.18. The MAINS plug used as the disconnect device. The disconnect device shall remain readily operable.19. Keep your TV away from moisture. Do not expose your TV to rain or moisture. If water penetrates into your TV, unplug the power cord and contact your dealer. Continuous use in this case may result in fire or electric shock.20. Do not expose batteries to excessive heat such as sunshine, fire or the like.21. Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.CONDENSATION:Moisture will form in the operating section of the unit if the unit is brought from cool surroundings into a warm room or if the temperature of the room rises suddenly. When this happens, unit’s performance will be impaired. To prevent this, let the unit stand in its new surroundings for about an hour before switching it on, or make sure that the room temperature rises gradually.Condensation may also form during the summer if the unit is exposed to the breeze from an air conditioner. In such cases, change the location of the unit.HOW TO HANDLE THE LCD PANEL: Do not press hard or jolt the LCD panel. It may cause the LCD panel glass to break and injury may occur. If the LCD panel is broken, make absolutely sure that you do not touch the liquid in the panel. This may cause skin inflammation. If the liquid gets in your mouth, immediately gargle and consult with your doctor. Also, if the liquid gets in your eyes or touches your skin, consult with your doctor after rinsing for at least 15 minutes or longer in clean water.POSSIBLE ADVERSE EFFECTS ON LCD PANEL:If a fixed (non-moving) pattern remains on the LCD Panel for long periods of time, the image can become permanently engrained in the LCD Panel and cause subtle but permanent ghost images. This type of damage is NOT COVERED BY YOUR WARRANTY. Never leave your LCD Panel on for long periods of time while it is displaying the following formats or images:The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock.The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.RISK OF ELECTRIC SHOCK DO NOT OPENTO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CImportant Safety InstructionsYour TV also contains material that can be recycled and reused. For disposal or recycling information, contact your local authorities or the Electronic Industries Alliance at www.eia.org (for USA), the Electronic Products Recycling Association at http://www.eprassociation.ca (for Canada) to find a recycler in your area. End of life directivesPower sourceNo naked flame sources, such as lighted candles, should be placed on the apparatus.WARNINGS: Do not connect this unit to the power using any device other than the supplied AC cord. This could cause fire, electrical shock, or damage.Do not use with a voltage other than the power voltage specified. This could cause fire, electrical shock, or damage.To use AC power: 1. Attach the female connector end (the part that does NOT contain the prongs) of the power supply cord to the TV.2. Plug the other end that contains the prongs into an AC outlet.CAUTION:When this unit is not used for a long time, (e.g., away on a trip) in the interest of safety, be sure to unplug it from the AC outlet.Do not plug/unplug the AC cord when your hands are wet. This may cause electrical shock.The LCD panel contains almost 3 million thin film transistors, which provide exceptionally sharp video quality. Occasionally, a few non-active pixels may appear on the screen as a fixed black (in the case of a dead pixel), blue, green, or red point. These non-active pixels do not adversely affect the performance of your TV, and are not considered defects. Non-active pixels Fixed Images, such as stock tickers, video game patterns, TV station logos, and websites. Special Formats that do not use the entire screen. For example, viewing letterbox style (16:9) media on a normal (4:3) display (black bars at top and bottom of screen); or viewing normal style (4:3) media on a widescreen (16:9) display (black bars on left and right sides of screen).The following symptoms are not signs of malfunction but technical limitation. There-fore we disclaim any responsibility for these symptoms. LCD Panels are manufactured using an extremely high level of precision technology, however sometimes parts of the screen may be missing picture elements or have luminous spots. This is not a sign of a malfunction. Do not install the LCD Panel near electronic equipment that produces electromagnetic waves. Some equipment placed too near this unit may cause interference. Effect on infrared devices - There may be interference while using infrared devices such as infrared cordless headphones.DECLARATION OF CONFORMITY This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference and(2) This device must accept any interference received, including interference that may cause undesired operation.

DImportant Safety InstructionsAttaching a Wall Mount or Stand to the TVCorrect way to attach a TV standIncorrect way to attach the Wall Mount bracket or Stand to the TVCorrect way to attach on the wallMake sure that your TV has adequate air circulation. Allow enough space around the TV as shown below. Avoid operating the TV at temperatures below 41°F (5°C).• When you mount your TV on the wall or place it on furniture, maintain a distance of at least 4 inches between the TV and other objects (walls, cabinet sides, and so on) to ensure proper ventilation. Failing to maintain proper ventilation may cause the TV to overheat.• Do not mount the TV at more then a 12 degree tilt.• Do not use screws that differ from the length and diameter that we have recommended (See the Hisense User Manual or Quick Start Guide).• Do not fasten the screws too firmly. This may damage the TV or cause it to fall, leading to personal injury. Hisense is not liable for these kinds of accidents.• Be careful when you touch the TV. Some parts may be warm or hot.• Do not place any type of fabric or papers underneath, on top of, or beside the TV. This can block ventilation and cause a fire.• For detailed information about installing the wall mount bracket, see the third-party manufacturer’s instructions or contact a professional installer for assistance.• Do not operate or handle the TV with wet hands. WARNINGS:Leave at least this much space around the set.Leave at least this much space around the set.4 inches(10cm)4 inches(10cm) 4 inches(10cm)4 inches(10cm)4 inches(10cm)2 3⁄8 inches(6cm)12 inches(30cm) 12 inches(30cm)Wall WallAir circulation is blocked.Inadequate air circulation can cause the TV to overheat.

ELegal NoticesFCC StatementNOTE:This equipment has been tested and found to comply with the limits for a class B digital Device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio Communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and the receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC ID Number WiFi Module: N89-NU361The WiFi Module complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.NOTEFor usage in Mexico , operation of this equipment is subject to the following two conditions : 1 ) it is posible that this device doesn′t cause any detrimental interference and 2 ) this device must take any kind of interference, including that which may cause its malfunctioning.Hisense and associated logos where applicable are registered trademarks of Hisense Group in the United States and/or other countries. All other trademarks are property of their respective owners. 2013 Hisense USA, Corporation. All Rights Reserved. * Specications subject to change without notice.WARNING

1Table of ContentsConnecting Devices to your TV ..............................................................................3Connecting an antenna, cable set-top box or satellite receiver ...........................................3Connecting an AV device with a composite video cable ...................................................... 3Connecting an AV device with a component video cable ....................................................4Connecting an AV device with an HDMI cable .....................................................................4Connecting headphones or an analog sound bar ................................................................ 5Connecting speakers (or other audio receivers) ................................................................. 5Connecting a digital sound bar to use ARC (Audio Return Channel) ..................................6Connecting your TV to a Wired or Wireless Network .............................................7Connecting to a Wireless network .......................................................................................7Connecting to an Wired (Ethernet) network .........................................................................7Using Your TV Remote Control .................................................................................9Completing the First-Time Setup Menu .................................................................. 11Basic and Advanced TV Settings ...........................................................................13Accessing the Quick Setup Menu ...................................................................................... 13Picture Settings ..................................................................................................................13Sound Settings ..................................................................................................................14Channels Menu ..................................................................................................................14 Network Menu ...................................................................................................................14System Menu ..................................................................................................................... 15About TV .......................................................................................................................... 16Parental Controls .....................................................................................................17 Getting familiar with the Home screen ...................................................................19

2Live TV .....................................................................................................................20Viewing channel information .............................................................................................. 20Viewing a channel list ........................................................................................................20Creating a Favorites list ...................................................................................................20Viewing your Favorites list ................................................................................................ 20Returning the previous channel ........................................................................................20VOD ............................................................................................................................21Netflix ................................................................................................................................ 21Amazon Instant Video ....................................................................................................... 21Youtube and Viewster .......................................................................................................21Vudu ..................................................................................................................................21Media .........................................................................................................................22File formats that are supported .......................................................................................... 22Viewing videos ................................................................................................................... 22Browsing content ...............................................................................................................22Viewing Pictures as a slideshow ........................................................................................22Apps ...........................................................................................................................23Mirroring content from your device to the TV ......................................................26Software updates for your TV ................................................................................27Quick Problem-solving tips .....................................................................................28

3Connecting Devices to your TVConnecting an antenna, cable set-top box or satellite receiverTo connect an antenna,cable set-top box or satellite receiver:Connecting a Satellite Receiver, DVD player (or other Audio Visual (AV) device with a composite video cable (yellow/red/white)You have several options for connecting your TV to different devices. The method in which you connect will be based upon the type of cables you have and the available outputs on your device.Connecting Devices to your TV1. Connect one end of a coaxial cable (not included) to the [RF OUT] jack on the antenna, cable or satellite box. If you are using an antenna with twin-lead cable, you may need a 300-75 Ohm adapter (not provided) to connect it to the back of your TV. Likewise, if you are using several antennas, you may need a combiner (not provided).2. Connect the other end of the cable to the [ANT/CABLE] jack on the side of TV.3. Using your remote, press the [INPUT] button and select TV as the input source.To connect an AV device with a composite video cable (not provided):1. Use the audio and video cables to connect the composite video/audio jacks (of the external AV device) to the [AV IN] jacks of the TV. (Video = yellow, Audio Left = white, and Audio Right = red).2. Plug the connected devices into the AV connectors on the TV before switching it on.3. Using your remote, press the [INPUT] button and select AV as the input source.Figure 7. Antenna, cable set-top box or satellite receiver to the TVFigure 8. AV device with a composite video cableor ANT OUTCable Set top boxRF OutEXTERNAL DEVICETV JACKTV JACKANT/CABLE(not included)(not included)DVD Player/RecorderVideo CameraEXTERNAL DEVICESSet-top boxSatellite ReceiverSatellite antenna cableVCRAV OUTVideoLRWhite(L)White(L)Yellow(Video)Yellow or Green(Video)Red(R)Red(R)Audio Cable VIDEO L RAV IN

4Connecting Devices to your TVY PBPRCOMPONENT INL RDVD Player/RecorderVideo CameraEXTERNAL DEVICESSet-top boxSatellite ReceiverSatellite antenna cableVCRWhite(L) White(L)Red(R) Red(R)Audio Cable Component Cable ComponentRLPRPBYRed(PR/CR) Red(PR/CR)Blue(PB/CB) Blue(PB/CB)Green(Y) Green(Y)HDMIHDMIEXTERNAL DEVICESDVDSet-top BoxHDMI Cable NOTESBecause the HDMI connector provides video and audio signals, it is not necessary to connect an audio cable.NOTESOne AV device can be connected to the TV using a component video or composite video cable.TV JACKTV JACKConnecting an AV device with a component video cable (red/blue/green) To connect an AV device with a component cable (which is red/blue/green):1. Use a component video cable (not provided) to connect the component output jacks of the external device to the YPBPR jacks for the TV. Use an audio cable to connect the component audio jacks of the external device to the TV AUDIO (L/R) jacks.2. Plug the connected devices into the YPBPR and L/R ports on the TV before switching it on.3. Using your remote, press the [INPUT] button and select Component as the input source.Figure 9. AV device with a component video cableConnecting an AV device with an HDMI cableThis type of connection supports digital connections between HDMI-enabled AV devices such as a Personal Video Recorder (PVR), DVD, Blu-Ray, AV receiver and digital devices. In addition, some devices (such as a PVR or DVD player) require an HDMI signal to be set to Output in the settings of the device.Please refer to the User Manual that came with your device for step-by-step instructions.To connect an AV device with an HDMI cable:1. Use an HDMI cable to connect the [HDMI] output port of the AV device to the [HDMI] jack of the TV.2. Plug the connected devices into the power socket.3. Using your remote, press the [INPUT] button and select the corresponding HDMI input.Figure 10. AV device with an HDMI cable

5Connecting Devices to your TV /AUDIO OUTEXTERNAL DEVICESEXTERNAL DEVICESPowerless Bass SpeakerSpeakerAudio AmplierDigital Sound BarDIGITALAUDIO OUT /AUDIO OUTConnecting speakers (or other audio receivers)To connect speakers (or other audio receivers) with an audio cable:Connecting headphones 1. Use an audio cable (not provided) to connect the [DIGITAL AUDIO IN] jack of the audio receiver device to the [DIGITAL AUDIO OUT] jack of the TV. Another option is to use an RCA Y-cable (1/8”-stereo mini to L/R phono) to connect an analog sound system to the [AUDIO OUT] jack of the TV.2. Plug the connected devices into the main power socket before switching on the TV.You can connect headphones to the [AUDIO OUTPUT] port on your TV. While the headphone is connected, the sound from the built-in speakers will be disabled.Figure 12. Headphones to the TVFigure 13. Audio receiver with audio cableTV JACKAudio Cable (not included)HDMI-to-MHL cable (not included)TV JACKSWhite(L)Red(R)Audio Cable (not included)Audio Cable (not included)If you prefer to use Audio Return Channel, then follow the steps on the next page under 'Connecting a digital sound bar to use Audio Return Channel'.NOTESNOTESFigure 11. MHL-enabled device to the TV

6Connecting Devices to your TVConnecting a digital sound bar to use Audio Return Channel (ARC)If you'd like to use the Audio Return Channel (ARC) feature to have sound sent from the TV back down an HDMI cable to a digital soundbar, then you will need to connect the cable to the [HDMI / ARC] port. By using this feature, you will also be able to control the soundbar with your TV remote instead of having to use multiple remotes for each device. • When a digital audio system is connected to the [DIGITAL AUDIO OUT] jack, decrease the TV and system volume. • 5.1 CH (channel) audio is available when the TV is connected to an external device that supports a 5.1 channel surround sound • You can receive 5.1 channel audio in one of two ways. The first way is to connect the [DIGITAL AUDIO OUT] jack from the device to the Amplifier. The second way is to connect the [DIGITAL AUDIO OUT] jack on the back of the TV to the [Optical] port on the Amplifier.After you’ve completed one of the two methods then be sure to go into the Advanced Audio Settings of the TV and select RAW to receive the 5.1 channel audio. You will need to also go into the sound or audio settings of your device to ensure it is set to 5.1 Channel output. It may read ‘Bitstream’, ‘RAW’ or ‘Digital’.Only digital sound bars that require a wired connection are compatible with the H7 Series Smart TV.To connect a digital sound bar with an HDMI cable:1. Connect the cable that’s attached to the soundbar to the HDMI / ARC port on the TV.2. Turn on the soundbar by pressing the Power button.3. Press the Quick Setup menu button on your remote and go to System > CEC Function4. Turn on the CEC Control setting.5. Press the right arrow on the D-pad of your remote to show the full menu settings.6. Select Sound > Advance Audio Settings 7. Go to the section of the screen that reads ‘TV Speaker & ARC’ and select ARC First.8. If the device has an ‘Input Selector’ feature then make sure to change it to ‘TV’.EXTERNAL DEVICESDigital Sound BarHDMI / ARCFigure 14. Digital Sound Bar to the HDMI / ARC port TV JACKHDMI Cable (not included)NOTESNOTES

7Connecting your TV to a Wired or Wireless NetworkWireless Adapter built-in the TV setLAN CableWireless Router The LAN Port on the WallConnecting Your TV to a Wired or Wireless NetworkConnecting to a Wired (Ethernet) NetworkYou have the option to connect your TV to a wireless or wired network to access the Internet. You can attach your TV to your LAN in one of the three following ways:Option 1.• You can attach your TV to your LAN by connecting the LAN port on the back of your TV to an external modem using a Cat 5 LAN cable. See Figure 16.• If your access point (AP) supports Wi-Fi Protected Setup (WPS), you can connect to the network via Push Button Configuration (PBC) or PIN (Personal Identification Number). WPS will automatically configure the SSID and WPA key in either mode.Our built-in wireless LAN adapter supports the IEEE 802.11 ac/a/b/g/n communication protocols and we recommend that you use an IEEE 802.11n or IEEE 802.11ac router. When you play a video over an IEEE 802.11 b/g connection, the video may not play smoothly.• You must use the Hisense built-in Wireless LAN Adapter to use a wireless network because the set does not support an external USB network adapter.• To use a wireless network, your TV must be connected to a wireless IP sharer. If the wireless IP sharer supports Dynamic Host Configuration Protocol (DHCP), your TV can use a DHCP or static IP address to connect to the wireless network.• Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the wireless IP sharer is currently being used by another device nearby, this will result in interference and communication failure.• If you apply a security system other than the systems listed below, it will not work with the TV.• If Pure High-throughput (Greenfield) 802.11N mode is selected and the Encryption type is set to WEP, TKIP or TKIP-AES (WPS2 Mixed) for your Access Point (AP), then the Hisense TV will not support a connection in compliance with these Wi-Fi certification specifications.Figure 15. Connect the TV to a wireless networkFigure 16. Connect a LAN port on the TV to an external modemConnecting to a Wireless Network(not included)NOTESExternal Modem(ADSL / VDSL / Cable TV) Ethernet Cable Modem Cable The Modem Port on the WallLAN Port on TVLAN

8Connecting your TV to a Wired or Wireless Network• You can attach your TV to your LAN by connecting the [LAN] port on the back of your TV to an IP Sharer which is connected to an external modem. Use an Ethernet cable for the connection. See figure 17.• Depending on how your network is configured, you may be able to attach your TV to your LAN by connecting the [LAN] port on the back of your TV directly to a network wall outlet with an Ethernet cable. See the diagram below. If you have a Dynamic Network, you should use an ADSL modem or router that supports Dynamic Host Configuration Protocol (DHCP). Modems and routers that support DHCP automatically provide the IP address, subnet mask, gateway, and DNS, so you don’t have to enter them manually. Most home networks are Dynamic Networks.Some networks require a Static IP address. If your network requires a Static IP address, you must enter the IP address, subnet mask, gateway, and DNS values manually on your TV’s Cable Setup Screen when you set up the network connection. To get the IP address, subnet mask, gateway and DNS values, contact your Internet Service Provider (ISP).Figure 17. Connect a LAN port on the TV to an IP sharerFigure 18. Connect a LAN port on the TV to a network wall outletYou can use ADSL modems that support DHCP if your network requires a static IP address. ADSL modems that support DHCP also let you use static IP addresses.Option 2Option 3The LAN Port on the Wall LAN Port on TVEthernet CableLANThe Modem Port on the WallModem Cable Ethernet Cable Ethernet CableLAN Port on TVExternal Modem(ADSL / VDSL / Cable TV) IP Sharer (Router)(with DHCP server) LANNOTES

9Using Your TV Remote ControlButtons on your TV remotePower on / offEnter Channels / input numbersMedia content control function buttonsDash button Select a digital sub-channelD-pad (up/down/left/right navigation buttons)Volume (up/down)Mute and restore soundAdjust Sleep timer settingQuick Setup Return to the previous place in the menu or appLive TVInfrared transmitterChange TV input sourceChannel (up/down)Exit the applicationTurn Closed Caption On/OffSpecial function buttonsAll AppsDisplay the Home screenConfirm buttonQuick access buttons to appsAPPAPPAPPAPP

10Using Your TV Remote ControlBegin using your remote1. Slide the back cover to open the battery compartment of the remote control.2. Insert two AAA size batteries. Make sure to match the (+) and (-) ends of the batteries with the (+) and ( - ) ends indicated in the battery compartment.3. Replace the battery compartment cover.Important Information about the remote and batteries:• Discard batteries in a designated disposal area. Do not throw them into a fire.• Remove old batteries immediately to prevent them from leaking into the battery compartment.• If you do not intend to use the remote control for a long time, remove the batteries. • Battery chemicals can cause a rash. If the batteries leak, clean the battery compartment with a cloth. If chemicals touch your skin then wash it immediately.• Do not mix old and new batteries.• Do not mix alkaline, standard (carbon-zinc) or rechargeable (NiCd, NiMH, etc.) batteries.• Do not continu e using the rem ote if it gets warm or hot.Call our Support Center immediately on the Hisense support website.Remote Control Range Information The remote control can work at a distance of up to 26 feet in front of the TV set. It can work at a 30 degree horizontal or vertical angle.Program Your Universal Cable or Satellite Remote Control to Operate Your New Hisense Television(only for USA)If you would like to program your other household remote controls to your new Hisense television,please refer to the User's Manual supplied by your Cable or Satellite provider. The Cable or Satellite providers' User's Manuals should include instructions on how to program their remote to your television.A list of Hisense codes for the most common Cable and Satellite providers are listed below. Use the Hisense code that is associated with your Cable or Satellite provider (if applicable).DIRECTV......0178, 10178, 10019, 10748, 11314, 11660, 11710, 11780, 12049, 10171, 11204, 11326, 11517, 11564, 11641, 11963, 12002, 12183Time Warner Cable......386, 0178, 10178, 400, 450, 461, 456, 0748, 1463, 0463, 10463Comcast......0178, 10178, 10463, 11463, 10748, 11314, 11660, 10171, 11204, 11326, 11517, 11641, 11780, 11785, 11892, 11963, 12002Cox Communications......0178, 10178, 1326, 1463Dish Network......505, 627, 538, 720, 659If the Hisense code associated with your Cable or Satellite provider is not listed, does not work or you cannot locate the instructions to program your remote, call your local Cable or Insert the batteriesGently push and slide Gently push and slideSatellite provider's customer service center.If your Cable or Satellite provider does not have a Hisense code available, please visit www.hisense-usa.com for additional codes.Using Your Cable Set-top Box or Satellite Receiver Remote as a ‘Universal’ RemoteIf you prefer to use your Cable Set-top Box or Satellite Receiver Remote as a ‘Universal Remote’, please refer to the manual that your cable or satellite service provided. It will include instructions on how to program their remote to your television. You can find codes that work with your Hisense Smart TV and the most common cable and satellite provider’s universal remote control at: www.hisense-usa.com/support www.hisense-canada.com/support www.hisense.com.mx/support

12Completing the First-Time Setup MenuScreen TaskNetwork ConnectionNETWORK CONNECTIONLanguage TermsEthernetConnecting EthernetConfigureWiFiMode Network Input DoneIf your TV does not automatically detect an Ethernet con-nection, then select Wi-Fi. When you’re done, select your network from the list that displays and move to the next screen.TV Input SourceLanguage Terms Mode Network Input DoneTV INPUT SOURCETV AVHDMI2HDMI1 HDMI3COMPONENTSelect how you receive your TV channels. Choosefrom one of the following sources below and then moveto the next screen.• TV• AV• Component• HDMINOTE: If you use an antenna to receive channels, then you must complete the rst-time setup menu in order to run a channel scan.Congratulations! Your TV is now ready to use.Press [OK] on your remote if you are fine with the selections that appear on the screen. Otherwise, navigate to the back arrow on the screen to change your selection.First-time Setup Menu (continued) CONGRATULATIONS !Your TV is now ready to use TV SelectionsEnglish United States Eastern Home Mode Ethernet TVOKLanguage Terms Mode Network Input Done

13Your Hisense TV comes with many TV setting features to allow you to customize the picture based on your viewing preference and environment. Accessing the Quick Setup MenuYou can press the [Quick Setup menu] button [ ] and press the right arrow on the D-pad to view the full menu settings. The Quick Setup menu consists of the following settings:• Picture• Sound• Channel• Network• System• About TV Basic and Advanced TV SettingsSetupPicture ModeStandardBrightness50Contrast50Color50BackLightLowAspect RatioNormal Advanced Picture SettingsRestore Default Picture SettingsPictureSoundChannelNetworkSystemAbout TVPicture MenuIf you’d like to configure the settings for your picture, then there are six types of picture modes available: Vivid, Standard, Theater, Energy Saving, Game and Sports.Once you choose the mode, you can adjust the picture based on the following settings: Brightness: Adjust the Brightness level to generate lighter or darker images. Contrast: Adjust the Contrast level to increase or decrease how bright images appear. Color: Adjust the color intensity of the picture for a more vibrant image. Aspect Ratio: Adjust the Aspect Ratio to stretch or zoom in on your picture. You can choose from the following settings: Auto, Direct, Panoramic, Cinema, Wide, Zoom or Normal. Backlight: This TV has a Dynamic Backlight Control setting that you can turn ‘On’ and set to high or low. The Backlight setting enables you to adjust how bright you want images to appear. In addition, an Eco Sensor setting is available that will enable the TV to automatically adjust the picture settings according to the amount of ambient light in your room. This is a money-saving feature because it reduces power consumption. Advanced Picture Settings: Adjust advanced picture settings based on your viewing preference. • Display: Adjust advanced picture settings in the component source. • OverScan: Change the video size settings to slightly crop the edges of the displayed image. • Tint: Adjust the colors from a green to magenta tint to view the natural skin tones of people on the screen. • Sharpness: Adjust how sharp or soft edges of images appear. • Ultra Smooth Motion: This setting minimizes afterimages that are left on the screen when viewing fast-moving objects. You can adjust it from high, medium or low. A high setting will produce a smoother picture whereas a low setting will result in a picture that has less judder (shaking). • Noise Reduction: Improve how clear the picture appears by reducing noise. • Adaptive Contrast: Automatically darken dark areas and lighten light areas of images to see more details. • Color Temperature: Select a preset color temperature. • White Balance: Adjust the intensity of red, green and blue lights to view the true colors of all images in the picture. • Color Tuner: Adjust the Hue, Saturation and Brightness of color settings. Restore Default Picture Settings: Restore all the picture settings in the current picture mode to the factory default values.

14 Basic and Advanced TV SettingsSound Menu Sound Mode: Select a preset sound mode to suit the type of content you are listening to: Standard, Theater, Music , Speech and Late Night.Set the sound effects to suit your preference: Configure your audio settings for your sound preferences. Once you choose the mode, you can adjust the audio based on the following settings: dAudio Enhancements: Total Technology delivers the best possible audio experience from your TV. • Total Sonics: Optimizes overall sound quality by increasing bass, making dialog clear and natural, and widening the sound field. • Total Surround: Provides surround sound experience with psycho-acoustic processing to place sounds beside, behind, and above the viewer. For best results use with Total Sonics. • Total Volume: Maintains consistent loudness levels from wide dynamic range programs, too-loud commercials, and channel or input changes. Advanced Audio Settings: Tune the audio settings and quality of the TV. • Equalizer: Boost the volume at different frequencies. • Lip Sync: Synchronize the displayed image with the audio output. • Balance: Adjust the left and right speaker strength to optimize audio for a specific location. • Digital Audio Out: Select the digital audio output format that best suits the audio device type. For example, choose RAW (which is uncompressed audio in RAW form) if you have 5.1 Channel Surround Sound Speaker set up. Choose PCM if you have an amplifier that does not support Dolby Digital technology. • Digital Audio Delay: Adjust the digital audio output delay time to sync sound from an external speaker with the images on the TV. • TV Speaker & ARC: Select the TV speaker or an external speaker for sound output. • Audio Out: Change the way audio is sent through the type of device that’s connected to your TV Audio Out port. Restore Default Audio Settings: Restore all of the audio settings in current audio mode to the factory default values.Channels Menu Tuner Mode: Select Tuner Mode if you receive TV channels over the air (antenna) or through a cable set top box. The input will be used during a channel scan. Auto Channel Scan: Automatically scan for channels to view programming from your TV source. Channel Skip: Skip a channel that your TV picked up during a previous channel scan search. Favorites List: Quickly access your most-watched channels by creating a Favorites list.Network Menu Network Configuration: Set up the network to gain full access of Smart TV features.• Internet Connection: Turn the Internet connection On or Off.• Connection Type: Choose between a wired or wireless network connection to access the Internet.• Wireless Settings: Configure the advanced wireless network settings for the TV. • IP Setting: Configure the IP setting for your network connection.• Connection Test: Start a network connection test.Sound ModeStandardAudio EnhancementsAdvanced Audio SettingsRestore Default Audio SettingsSetupdPictureSoundChannelNetworkSystemAbout TVTuner ModeCableAuto Channel ScanChannel SkipFavorites ListSetupPictureSoundChannelNetworkSystemAbout TVNetwork ConfigurationNetwork InformationDisconnectedAnyview StreamOffTV NameSmartTVSetupPictureSoundChannelNetworkSystemAbout TV

15 Network Information: View information about your network connection. Anyview Stream: Share video, music or other content from another device on to your TV screen. TV Name: Choose a name for your TV. The name will be shown to devices that are available for sharing data.System Menu Location: Choose the location from where you will watch your TV. Time: Set the current time based on your location.• Time Zone: Select your time zone: Eastern, Indiana, Central, Mountain, Arizona, Pacific, Alaska and Hawaii.• Time Format: Set the time to display in a 12 or 24-hour format.• Date/Time: Set the Date and Time.• Daylight Savings: Select whether to apply Daylight Savings Time to the TV.• Power On Timer: Enable the Power On Timer to Off, Once or Daily.• Power Off Timer: Enable the Sleep Timer to Off, Once or Daily.• Sleep Timer: Set the sleep timer to automatically turn the TV Off within a specified time: Off, 10 Minutes, 20 Minutes, 30 Minutes, 40 Minutes, 50 Minutes, 60 Minutes, 90 Minutes and 120 Minutes. Language: Adjust the default language settings for the TV. Parental Controls: Turn On Parental Controls to block children from being able to view certain programs. The default password is 0000.• Locks: Enable or disables all locks. All selected locks can be turned off for parental viewing and easily turned on again.• Block Time: Block certain channels and programs during certain periods of time.• Channel Block: Block programs by channels when you turn On the Parental Controls feature.• Program Block: Block certain programs when your turn On the Parental Controls feature.• Input Block : Block content from devices that are connected to certain TV ports.• Change PIN: Change your PIN that you use to access Parental Controls. If you want to change your parental control password, first enter the new password then enter the same password again.NOTESIf you forget your password, call the Hisense Consumer Electronics Care Center or reset your TV back to the factory settings.• Restore Parental Control Defaults: Restore Parental Control back to the factory default setting. Application Settings: Set settings for apps on your TV.• Netflix : Remove this TV from your Netflix account. Please contact Netflix if you want to stop being billed for you service.• ESN : Display the Netflix Electronic Serial Number.• VUDU : Remove this TV from your VUDU account. Please contact VUDU if you want to stop being billed for you service. Closed Caption: Adjust Closed Captioning settings.• Analog Caption: Select an Analog Caption setting from Off, CC1-CC4, Text 1-TEXT4.CC1-CC4: Closed captioning appears in a small banner across the bottom of the screen. CC1 is usually the “printed” version of the audio. CC2-CC4 display content are provided by the broadcaster.Text1-Text4: Closed LocationUSATimeLanguageClosed CaptionParental ControlsCEC Function Application SettingsAdvanced SettingsSetupPictureSoundChannelNetworkSystemAbout TV Basic and Advanced TV Settings

16captioning that covers half or all of the screen. Text1-Text4 display content are provided by the broadcaster.Off: To turn off the Analog Caption.• Digital Caption: Select a Digital Caption setting: Off,CS1-CS6.• Digital CC Settings: There are two Caption Styles. One is the automatic function set as the broadcaster, while the other is the custom style where you can adjust the font size, Font, Text color, Text opacity, background color etc. CEC Function : Configure how to control CEC-enabled devices with your TV remote.• CEC control: Allow HDMI devices to control each other. • Device Auto Power Off: Automatically turn off HDMI CEC devices when the TV is turned off .• TV Auto Power On: Allow the TV to turn On with CEC-enabled devices.• Device Connect: Allow CEC-enabled devices to communicate with each other when connected through an HDMI cable.• CEC Device Lists: View a list of all CEC-enabled devices.NOTESHDMI cables must be used to connect HDMI CEC-compatible devices to your TV.The HDMI CEC feature of the connected device must be turned on.If you connect an HDMI device that is not HDMI CEC-compatible, all the HDMI-CEC Control features do not work.Depending on the connected HDMI device, the HDMI-CEC Control feature may notwork. Advanced Settings: Access the Advanced Settings menu.• Menu Timeout : Set the amount of time that you’d like for the menu to display : 5s ,10s , 20s , 30s , 60s or Off.• Use Mode: Set the TV to use in Home or Store Mode.• Input Labels: Edit the input labels.• Default Source For Live TV: Select the default input on the remote control Live TV.• Setup Wizard: Use the Setup Wizard for instructions to help you set up your TV.• Power Indicator: Set the Power Indicator light to stay On or Off when watching TV.About TV Menu About TV• System Info: View system information.• Hisense Legal Disclaimer: Read the Hisense Legal Disclaimer.• Auto Firmware Upgrade: Set your TV to automatically receive the latest firmware.• Check Firmware Upgrade: Check to ensure that your TV has received the latest firmware.• Restore To Factory Default: Restore your TV back to the factory default.System Info Hisense Legal DisclaimerAuto Firmware UpgradeOnCheck Firmware UpgradeRestore To Factory DefaultSetupPictureSoundChannelNetworkSystemAbout TV Basic and Advanced TV Settings

17Parental Controls The Parental Controls setting allows you to block content that is not appropriate for children to watch. You can do this by creating a 4-digit passcode. The factory-default passcode is 0000.Turning Parental Controls 'On'To access Parental Controls:1. Press the [Quick Setup] menu button on your remote.2. Press the right arrow button to display the full menu settings.3. Select System > Parental Controls.4. Press [OK] on your remote. An Enter PIN window displays.Using the numerical keypad on your remote, enter the factory-default passcode 0000 and press [OK].Press the right arrow button on the D-pad to turn the locks 'On'. You will see the other Parental Control settings change from a greyed out state and become highlighted. When this occurs, begin adding other settings to the Block Time, Channel Block, Program Block, Input Block, Change PIN or Restore Parental Control Defaults features.All ratings that are higher than those you select are also blocked. For example, if you choose to block the PG-13 rating, then the higher ratings (R and NC-17) are automatically blocked too.Channel BlockBlock programs by channels when you turn on the Parental Controls feature.Block TimeChoose a time of day that you'd like to start blocking certain programs.Program BlockBlock certain programs when you turn on the Parental Control feature.Input BlockBlock content from devices that are connected to certain TV ports.Change PINChange your PIN that you use to access Parental Controls.Restore Parental Control defaultsRestore Parental Controls back to the factory setting. Parental ControlsNOTES

18Description of U.S. TV RatingsDescription of Age-based RatingsU.S. Movie RatingsContent Defined asFV Fantasy ViolenceDSuggestive dialogLCourse or crude languageSSexual situationsVViolenceTV-Y All childrenTV-Y7 Directed to older childrenTV-G General audienceTV-PG Parental Guidance SuggestedTV-14 Parents strongly cautionedTV-MA Mature Audiences OnlyRating Defined asGGeneral audiencePG Parental Guidance suggestedPG-13 Parents strongly cautionedRRestrictedNC-17 No one 17 and under permittedCanadian English RatingsCanadian French RatingsIf you forget your passcode, call the Hisense Consumer Electronics Care Center or choose Restore Parental Control defaults from the Parental Controls settings menu. Rating Defined asCChildrenC8+ Children 8 years and olderGGeneral programming that is suitable for all audiencesPG Parental Guidance14+ Viewers 14 years and older18+ Adult ProgrammingRating Defined asEExempt programming (no rating)GGeneral (appropriate for all ages and must contain little to no violence or sexual content)13+ Programming is appropriate for children 13 and older and may contain moderate violence, language and some sexual situations16+ Recommended for children 16 and older and may contain strong violence, language and sexual content18+ Programming intended for viewers that are 18 and older. Programming may contain extreme violence and graphic sexual content/pornography. Parental ControlsNOTES

19 Getting familiar with the Home screenGetting familiar with the Home screen The simple design of the Home screen menu makes it easy to navigate. It serves as the central location to access Live TV, VOD, Media or Apps and inputs on the back of the TV that you've connected external devices to.To access the Home screen, press the [Home] button on your remote control and use the arrows on the D-pad to make your selection. Indicators and Icons on the top of the Home screenYou can always view the current time in the top right corner of the Home screen.If your TV is connected to the Internet through a wireless connection or an Ethernet cable, then an icon will display in the top right corner of the screen. This location makes it very convenient for you to determine if you still have Internet connectivity as you use the TV. In addition, if you have connected a device (such as a thumb drive) to a USB port and your TV recognizes it, then a device icon will also display in the same area. No SignalHDMI2HDMI210:41AM 60°F-71°FComponentTVLiveTV VOD Media AppsHDMI1123 Figure 19. Home screenNames of icon images that appear on the side of the Home screenThe following icon names represent the inputs on the back of the TV:• TV• AV• Component• HDMI 1• HDMI 2• HDMI 3• HDMI 4Each time you access the Home screen, the icons for your inputs will display on the right side of the screen. Inputs that you have connected an external device to will be highlighted. Inputs that do not have an external device connected to are greyed out. Names of icon images that appear on the bottom of the Home screenThe bottom of the Home screen displays the following icon names:• Live TV• VOD• Media• Apps

20 Live TVLiveTVTo view broadcast programs, select the Live TV icon on the screen or press the [Live TV] button on your remote. Viewing Channel informationAs you use the [Channel] button on your remote to scroll through channels, an information banner appears on the top of the screen. 2 3 4910 1151687 Figure 20. Information bannerThe information banner displays the following information:• Channel number (1)• Lock status (2)• Input (3)• Start/Stop time progress bar of the current program (4)• Show identification (5)• Television Network identifier (6)• Current date and time (7)• Prompt (8)• Beginning and end time of the next program (9)• Program name (10)• More info (11)If you are watching a particular channel, you can also press the up arrow on the [D-pad] of your remote to view channel information.Viewing a channel listAfter you have done an automatic channel scan (if you're using an Antenna) or are receiving your channels through a cable provider, you can view your list of channels by pressing [OK] on your remote.You will see the channel list display on the right side of the screen.Creating a 'Favorites' listTo quickly access your most-watched channels, you can create a 'Favorites' list.To create your 'Favorites' list:1. Press the [Quick Setup] button on your remote.2. Select Channel> Favorites List3. Using the up/down arrows on the D-pad of your remote, select a channel and press [OK]. A heart-shaped indicator will appear beside the channel as confirmation that it has been successfully added.Viewing your 'Favorites' listTo view channels that you've added to your Favorites list simply press [OK] on your remote to call out the Channel list.The channel list appears on the right side of the screen and heart-shaped icons are shown next to the channels that make up your Favorites list.

21VODIf you want to view content through Video-on-demand, then select the VOD icon to launch the main screen of the menu. Two rows of logos for the following pre-installed Video-on-demand apps appear:• Netflix• Amazon Instant Video• YouTube• Vudu• Dailymotion • ViewsterThese logos are fixed elements of the VOD menu screen design to provide a convenient way to launch the apps from the TV. To the left of the logos, a thumbnail image of a movie poster is also shown. The poster is for a Vudu-recommended movie to rent or purchase. The thumbnails of the movie poster images that appear on this page are dynamic (meaning they will change) as long as your TV is connected to the Internet. The poster image of the movie (or TV show) will change based on the latest movies that have been released or popular TV shows. 10:41AM 60°F-71°FLiveTV VOD Media Apps Figure 21. VOD Screen (as it appears for the USA market) Figure 22. VOD screen (as it appears for Canada and Mexico markets)Netflix®Netflix is a streaming media company that provides movies and TV shows for you to view online or stream right to your TV. If you are a Netflix member, simply enter your email address and password to sign in to your Netflix account. If you don’t already have an account, then you can try the service (FREE) for one month by creating an account. If you enjoy your trial membership, then you don’t have to do anything. Your membership will automatically continue for as long as you choose to remain a member. Once you click on the Netflix icon to launch the application, you can register for the service directly from your TV. Simply follow the prompts to get started.NOTESNetflix is available in select countries. Streaming membership required.Amazon instant videoIn North America Amazon Instant Video is Only Available to Customers Residing in the United States.YouTube and ViewsterYou can use the YouTube and Viewster apps to view videos on the TV.VuduVudu is a video streaming service that enables you to rent or purchase High-Definition movies and TV shows. If you are not a Vudu subscriber yet, then you will need to create an account to use the service. Once you click on the Vudu icon to launch the application, you can register for the service directly from your TV. Simply follow the on-screen prompts to get started.NOTESVUDU is currently available in the U.S. only.Dailymotion You can use the Dailymotion app to view videos on the TV. VOD10:41AM 60°F-71°FLiveTV VOD Media Apps

22MediaMedia is a central location for you to upload and view or listen to different types of content (for example, your photos, music and movies) through the following methods:• A USB thumb drive or hard drive• Your mobile phone, tablet or other personal device: You can stream movies, pictures and photos that are stored on your personal device and play or view the content on your TV.When you connect your thumb drive or other personal device to the TV, the TV automatically detects it and displays a device icon in the top right corner of the screen. Panels that appear on the Media screenThe Media screen displays three panels: Picture, Video, Music.File formats that may be supportedNOTE: Due to differences in programming tools and other factors, some of the file formats that are listed may or may not be supported.Medium File FormatVideos TRP, M2TS, MKVPicture JPG, BMP, PNG, GIFMusic MP3Viewing VideosWhile viewing videos you will see a number of icons appear at the bottom of the screen. You can use the [D-pad] button of your remote to select these icons that will control the video. Browsing ContentTo browse through content based on the type that you wish to access:1. Navigate to the appropriate menu tab on the left side of the screen and select Music, Video or Picture. The library of items displays on the right side of the screen.2. Navigate to the right side of the screen and click on the name of the folder that contains your content.3. Make your selection to play or view the content.If you want to close out of the Media center, then press the [Exit] button on your remote.Viewing Pictures as a SlideshowTo view pictures in a slideshow:1. Navigate to the Pictures tab.2. Click on Start the Slideshow.The slideshow of your pictures begins to play. To stop the slideshow, press the [Enter] button on your remote and press it again to restart it. An Edit Picture window displays. Media

24All Apps Figure 24. Collective view of all the factory-installed appsOpera TV Store™Opera TV Store contains cloud-based apps optimized for your TV. The apps range from Video, Music, Social Networking, Games and News Information. To begin using Opera TV Store, you simply need to accept the End-User License Agreement and then select the app that you want to use. Opera TV BrowserThe Opera TV Browser allows you to surf the Internet on your TV and provides quick access to the Google™ search engine. To view a website or search using the Opera TV Browser:1. Using the [D-pad] on your remote, navigate to the Opera web browser icon underneath the Opera Store icon. 2. Press [OK] on your remote. The browser window displays.3. Using the [D-pad] on your remote, navigate up to the URL bar to place your cursor there.4. Press [OK] on your remote to bring up the onscreen keyboard.5. Type the website address or search term on the text field.6. Press the [Blue] special function button towards the top of the remote (under the number pad). The website address or search term you've typed populates in the URL bar window.7. Select the forward arrow (to the right of the URL bar) and press [Enter] on your remote to load the page or start the search. Installing an AppEven though your TV has numerous factory-installed apps, there may be others that you'd like to download. To install an app:1. From the Home screen, click on the Opera Store icon.2. Navigate to the Search tab at the top of the screen.3. Press the [Enter] button on your remote to bring up the on-screen keyboard and begin typing the name of the app. As you begin typing the first two to three letters the Opera Store suggests words to quicken your search time. 4. Use the D-pad of your remote to select the app. A page displays that shows a written description of the app. 5. Click on Open or Add to Favorites. Apps

25Removing an AppYou can only delete apps that you've downloaded to the TV. Factory-installed apps can not be deleted. To delete an app:1. From the Apps screen, use the directional arrows on the [D-pad] button of your remote to select the app that you want to remove.2. Press the [Red] special function button underneath the numerical keypad of your remote. A dialog message displays that asks if you're sure you want to remove the app.3. Press [OK] on your remote. A confirmation message displays and the icon is removed from the Apps list screen. NOTES If an app is deleted,the information related to that app is also removed.Moving App Icons aroundApps can not be moved around on the screen. Customizing the name of your TV If you have several TV's in your home then you may want to customize the name of your TV. By giving your TV a name, it will make it easier for you to identify it when connecting devices to the TV to stream or mirror content.To customize the name of your TV: 1. Press the [Quick Setup Menu] on your remote.2. Go to Network>TV Name.3. Press [OK] to bring up the keyboard and begin typing the name.4. When you are finished, power off the TV and power it back on for the change to take effect. Apps

26Using Anyview Cast to mirror content from your device to the TV screenThe Hisense Anyview Cast is an app that enables you to share (or cast) a video, audio or image from your Android-based device to the TV.From your tablet or phoneTo mirror content from your tablet to the TV:1. From the TV Settings, go to System > Network and turn on the Anyview Stream setting.2. Press the All Apps button on your remote and select the Anyview Cast app.3. Turn on your Android-based device and go to Settings > Display > Cast Screen. NOTE: Some Android-based devices may not support casting.4. Find your TV in the list of devices that displays and select it.5. Wait for the ‘Creating Connection’ progress bar to complete on the TV screen and the video or image will display in a moment. Mirroring content from your device to the TV

27Software updates for your TVThe software (also referred to as firmware) is part of what powers your TV. Hisense will provide software updates to continuously enhance your TV and correct any issues that may impact your user experience; therefore, we recommend that you keep your TV connected to the Internet to automatically receive updates when they are available. You can choose to receive updates automatically or check for software updates and install them manually.Checking for updates automatically In order for your TV to receive software notification updates automatically, it must be turned 'On' and connected to the Internet. The Auto Firmware Upgrade setting (which enables your TV to receive the updates automatically) is turned to 'On' by factory default. If you turn the Auto Upgrade setting 'Off', it will disable this functionality of your TV. Note: While your TV is on and checking for updates, the program that you are watching will not be interrupted.Disabling the Auto Firmware Upgrade feature If you do not want your TV to automatically check for updates and to receive notifications when they are available, then:1. Using your remote, press the [Quick Setup Menu] button.2. Go to About TV > Auto Firmware Upgrade and turn the feature 'Off' By doing this, you will have to manually check to see if you have the latest software update. Checking for the latest firmware To manually check for the latest firmware:1. Using your remote, press the [Quick Setup Menu] button.2. Go to About TV> System Information. UpgradeCurrent version: V00.01.00a.F0116Latest version: V000100aF0114Upgrade contentUpgrade Cancel Never Reminder Figure 25. Check Firmware screenshot Manually installing software updatesIf you have not kept your TV connected to the Internet or you turned the Auto Firmware Upgrade feature 'Off' then you'll need to manually install the software. If the Check Firmware screen shows that an updated package is available, then:1. From the Check Firmware submenu, select Download upgrade pack.2. Follow the rest of the steps that display Software updates for your TV

28Quick Problem-Solving TipsWhen you experience an issue with your TV, turn it off and on again. If this does not resolve the problem, then refer to the tips below. ISSUES POSSIBLE SOLUTIONSThere is no sound or picture from the TV• Check to see if the power cord is plugged into a power outlet.• A power switch on the right side bottom edge of the front panel must be turned on. Press the Power button on the remote control to activate the unit from 'Standby' mode.• Check to see if the LED light is on or not. If it is, then the TV is receiving power.I have connected an external source to my TV and do not see a picture and/or hear any sound• Check for the correct output connection on the external source and for the correct input connection on the TV.• Make sure you have made the correct selection for the input mode for the incoming signal.When I turn on my TV, there is a delay for a few seconds before the picture appears. Is this normal?• Yes, this is normal. The TV is initializing and searching for previous setting information.The picture is normal but there is no sound• Check the volume settings.• Check if 'Mute' mode is set to On.Sound but no picture or black and white picture• If the picture is black and white, unplug the TV from the AC outlet and replug it after 60 seconds.• Check that the Color is set to 50 or higher. • Try different TV channels.The sound and/or picture is distorted or appears wavy• An electric appliance may be affecting the TV. Turn off any appliances that are nearby and move it farther away from the TV.• Insert the power plug of the TV set into another power outlet.The sound and picture is blurry or cuts out• If using an external antenna, check the direction, position and connection of the antenna.• Adjust the direction of your antenna or reset or ne tune the channel.A horizontal or vertical stripe appears on the picture and/or the picture is shaking• Check to see if there is an appliance or electric tool nearby that is causing interference. The plastic cabinet makes a "clicking" type of sound• The 'click' sound can occur when the temperature of the television changes. This change causes the television cabinet to expand or contract, which makes the sound. This is normal and the TV is OK.The remote control does not work• Conrm that TV still has power and is operational.• Change the batteries in the remote control.• Check if the batteries are correctly installed.

Navigation menu