Hisense Electric LCDD0035 LED LCD TV User Manual 32K366W Hisense QSG 2013 4 3
Hisense Electric Co., Ltd. LED LCD TV 32K366W Hisense QSG 2013 4 3
Contents
- 1. W9HLCDD0035_ User Manual 1(P1-8)
- 2. W9HLCDD0035_ User Manual 1(P9-16)
- 3. W9HLCDD0035_ User Manual 1(P17-25)
- 4. W9HLCDD0035_ User Manual 2
W9HLCDD0035_ User Manual 2
![42A300/42A320CY-GBarcode35*10.5mmBUTTONS AND CONNECTORS5When there is something wrong with your TV, you can try turning o the TV and restarting it. You can also refer to the following chart for problem and solution tips. • Confirm power cord is plugged into the AC outlet and the AC outlet is getting electricity.• Attempt to power on unit using the power button on both the TV and the Remote.• Check for the correct output connection on the external source and for the correct input connection on the TV.• Make sure you have made the correct selection for the input mode for the incoming signal.• Check the volume settings.• Check if Mute mode is set "on" .• If black and white picture first unplug TV from AC outlet and replug after 60 seconds.• Check Color Setting if picture is black and white.• An electrical appliance may be affecting TV set. Turn off any appliances, if interference goes away, move appliance farther away from TV.• Insert the power plug of the TV set into another power outlet.• Confirm that TV still has power and is operational.• Change the batteries in the remote control.• Check if the batteries are correctly installed.• Clean the front of the remote control (LED window).• If using a universal remote, be sure to select the TV mode on the remote.• If the remote still does not work:-Remove and reinstall the batteries correctly to reset the remote or install new batteries.-Press the Power button to turn on the TV. With a universal remote if you have reset or changed the batteries you will need to reprogram the remote for the other units. • Check if there is obstruction between the remote control and the TV.TIP: If you have a digital camera / camera phone, you can aim the front of the remote at camera lenses (at this time, the camera should set on camera mode, not play mode). Observe the camera screen while pressing a button on the remote control; you should see flashing light on the screen. If there is no light observed, the remote control is not working. You need to repair or replace the remote control. POSSIBLE SOLUTIONSSYMPTOMSNo sound or picturePicture is normal, but no soundSound but no picture or blackand white picture. Sound and picture distorted orappear wavy. • If using an external antenna, check the direction, position and connection of the antenna.• Adjust the direction of your antenna or reset or fine tune the channel.Sound and picture is blurry orcuts out momentarily. • After switching to Cable, please auto program the channels. The TV will “remember” all the channels then the TV will allow you to surf the channels with [CH /V] buttons.[CH /I have connected an external source to my TV and I get no picture and/or sound.HELP TOPICS9TURNING THE TV ON FOR THE FIRST TIME8Note: If you are using a cable or satellite box and you have connected it to the TV using a Coaxial cable, you should select the cable option. Be sure the cable or satellite box is turned on before starting the channel scan. If you use a cable or satellite box connected to A/V, Component or HDMI, you don't need to scan for channels.REMOTE CONTROL4Wall-Mount hole pattern VESA (mm)Wall-Mount screw size (mm)2Follow instructions provided with the Wall-Mount bracket.• If you are not sure of your ability to do complete the installation, contact a professional installer or service technician for assistance. The manufacturer is not responsible for any damages or injuries that occur due to mishandling or incorrect assembly.• Be sure to use the provider spacers between the TV and the bracket when attaching the mount.ACCESSORIES LIST1INSTALLING THE STAND2Video Eect:Connect an outdoor VHF/UHF antenna.ANTMenu Language Time SettingPicture Mode TV SourceConnect Headphone for audio out of the TV. HEADPHONEAUDIOOUT/ORORBEST (HDMI)BETTER(COMP)GOOD(AV)HDMI / COMP / AV Connect an HDMI cable or Comp/AV Adapter from an external A/V equipment.Connect an optical cable from an external digitalaudio system.DIGITAL AUDIO OUTVGA & VGA AUDIO Connect a VGA cable and an audio cable from the PC.CHANGE THE BATTERIESORConnect a USB device for browsing photos and movies.USBMobile Hard DiskVHF/UHF AntennaCableANT OUTSPECIFICATIONS7 Align the front of the stand column with the front of the base, then insert the stand column into the base making sure that the groove in the stand column aligns with the ridge in the base. Secure the stand column to the base with 3 Screws A (M5 x 12) .Secure the stand to the TV with the 4 Screws A (M5 x 12).Align the stand cover with the stand column, then secure the stand cover to the stand column with 1 Screw A (M5 x 12) . Make sure that the bottom of the stand cover is flush against the top of the stand column. NOTESProduct image is only for reference, actual product may vary in appearance. Carefully place your TV facedown on a soft, cushioned surface to prevent damage to the TV or scratching to the screen.1. Slide the back cover to open the battery compartment of the remote control. 2. Insert two AAA size batteries. Make sure to match the (+) and ( - ) ends of the batteries with the (+)and ( - ) ends indicated in the battery compartment.3. Close the battery compartment cover. 1Gently push and slide 2Insert the batteries 3Gently push and slideLY PBPRRCOMPONENT INVIDEO AV INAUDIOLY PBPRRCOMPONENT INVIDEO AV INAUDIOVGAPC/DVI AUDIO INPC INDIGITAL AUDIO OUTUSBDC 5V 0.5A(MAX)Choose Your Menu Language ENTER Enter Select MENU Return EXIT ExitEnglishFrançaisSet menu language to English,Français, or EspañolChoose Your Picture Mode Home mode default settings are recommended for in-home use. ENERGY STAR@ qualified.Retail mode is intended for in-store display and resets video settings at Power On.Home ModeRetail Mode Select Return EXITMENU Enter ENTER ExitReduces total power consumptionChoose Your TV SourceAntennaCable Select Return EXITMENU Enter ENTER ExitSelect if using an antenna for standard or HD TVConnect your TV’s power cord to a power outlet, then press power. The initial setup screen opens. Press [►/◄] button to select your language, press [ENTER] button to confirm.Press [►/◄] to select your Picture Mode: Home Mode or Retail Mode, press [ENTER] button to confirm.If you select Retail Mode, a message appears “ Are yousure you want retail mode?” Select “Yes” to continue, orselect “No” to change your selection. For energy saving, we kindly suggest you select the HomeMode.Setting Time Zone: Select the local time zone according to your region.Setting the Time: Press [▲/▲] to select the number you want to set and press [►/◄] to set.Press [▲/▼] to select your TV Source: Antenna or Cable,press [ENTER] button to confirm.If you press [EXIT] to exit the scanning, a message appears“Please Run Channel Auto Scan”, you should scan channelsfrom the menu of ChannelsChoose Your Time Setting ENTER Enter Select MENU Return EXIT ExitIf Automatic, options are automatically set by TV sourceModeTime ZoneDaylight SavingsYearMonthDayTimeAuto Off 2012 January 01 01:10 AM TV CONNECTORS6Check the jacks for position and type before making any connections. Loose connections can result in image or color problems. Make sure that all connections are tight and secure.VV] don’t work when I Vset the Channel to Cable? They work with the Air setting?11. If you want to attach the TV to a wall-mount bracket (not provided), you should first remove the stand if it is pre-attached. Make sure the TV is laid face-down on a clean, safe, and cushioned surface.If you want to attach the TV to a wall-mount bracket(not provided), you should rst remove the stand if it is pre-attached .INSTALLING A WALL-MOUNT BRACKET3Remote control does not work.Follow the illustrations below to complete the installation steps. 2Back ViewStand coverStand column1Ridge Groove3User Manual Quick Setup Guide Remote ControlScrew A (M5 × 12) × 8(M6 × 30) × 4 Spacer × 4Warranty cardBatteries: AAA × 2Screw B200 × 200 M6EspañolWeightLCD Panel Minimum size(diagonal)Screen resolution42A300/42A320Model NameDimensionWithout StandWidth: 37.59 inches (954.8 mm)Height: 22.13 inches (562 mm)Depth: 2.36 inches (59.9 mm)Width: 37.59 inches (954.8 mm)Height: 24.48 inches (621.8 mm)Depth: 8.86 inches (225 mm)25.8 lbs (11.7 kg)29.1 lbs (13.2 kg)41.6 inches1920 × 1080Audio power 7 W + 7 WPower supplyReceivingsystems120 V ~ 60 HzReceiving channelsTuner type Environmental conditionsVHF: 2~13 UHF: 14~69 CATV: 1 ~ 125Digital Terrestrial Broadcast (8VSB): 2 ~ 69Digital cable (64/256 QAM): 1 ~ 135NTSCATSC / QAMComponent InputVGA Input VGA (640×480 / 60 Hz), SVGA (800×600 / 60 Hz), XGA (1024×768 / 60 Hz)480 I / 60 Hz, 480 P / 60 Hz, 720 P / 60 Hz, 1080 I / 60 Hz, 1080P/60HzHDMI Input RGB / 60 Hz (640×480, 800×600, 1024×768)YUV / 60 Hz (480 I, 480 P, 720 P, 1080 I, 1080P)Frequency synthesizedTemperature: 41°F ~ 95°F (5°C ~ 35°C)Humidity: 20% ~ 80% RHAtmospheric pressure: 86 kPa ~ 106 kPaWith StandAnalogDigitalWithout StandWith StandTo prevent internal damage to the TV and ensure the TV is mounted securely, use only the 4 screws in the Screw B pack.WARNINGScrew BBracket (1.5~2.5 mm)Spacer × 4Screws B9.5~12.5 mm Wall-mount BracketScrewSpacerthe TV’s rear coverPower on/offSelect HDMI source Select component sourceDisplay favorite listSelect input sourceInfra-red transmitterSelect TV / AV / VGA / USB sourceAdjust closed caption modeUsed when Roku StreamingStick connectedZoom buttonMedia content control function buttonsUsed when Roku Streaming Stick connectedAudio select buttonMono/Stereo/SAP operationMENU buttonSelect sound modeSelect picture modeSet the sleep timerGo to the previous channelDisplay the information bannerMUTE buttonNext channelPrevious channelDisplay the channel nameDirect channel selectionDash buttonSelect a digital sub-channelMedia contentcontrol function buttonsMove Up/Down/Left/Rightor adjust settingsDecrease volumeIncrease volumeClose the menu2. Attach purchased bracket (1.5~2.5 mm thickness) on the TV with the 4 screws in the Screw B pack.MENU Display the on-screen menu to setup your TV’s features.INPUT Select the different input signal sources.Adjust the volume.CH /VOL+/-Select the channel.(Power button) Turn on the TV or put the TV in standby mode.Caution: The TV continues to receive power even in standby mode. Unplug the power cord to disconnect power.Item DescriptionANT/CABLE Connect an antenna or cable TV to this jack.HDMIHDMI (High-Definition Multimedia Interface) provides an uncompressed, all digital audio/video interface between this TV and any HDMI-device, such as a set-top box, Blu-ray disc player, or A/V receiver.COMPONENT IN Connect to a DVD player, Digital Set-Top-Box, or other A/V devices with component (YPBPR) video and audio output jacks.AV IN Connect to the composite video and audio (L/R) output jacks on external video devices.VGAPC/DVI AUDIO IN Connect to a PC or other devices with a VGA or DVI interface./AUDIO OUT Connect headphone or analog sound system using RCA Y-cable (1/8"-stereo mini to L/R phono-not provided).DIGITAL AUDIO OUT Connect an audio amplifier to this jack.USB Port for Digital Media Player and for software update. HDMI 1/ARC/AUDIO OUTDIGITALAUDIO OUTUSBDC 5V 0.5A(MAX)VIDEOYPBPRL -AUDIO- RCOMPONENT INAV INANT/CABLEHDMI2/MHL HDMI3PC/DVIAUDIO INPC INVGAAC power cordMENUINPUTVOL+CHCHVOL-](https://usermanual.wiki/Hisense-Electric/LCDD0035.W9HLCDD0035-User-Manual-2/User-Guide-2126314-Page-1.png)