Hisense Electric LCDD0030 Part15 Subpart B-LED LCD TV User Manual W9HLCDD0030 2

Hisense Electric Co., Ltd. Part15 Subpart B-LED LCD TV W9HLCDD0030 2

Contents

W9HLCDD0030_User Manual 2

K366 SeriesCY-G131605ctual product.Check the jacks for position and type before making any connections. Loose connections can result in image or color problems. Make sure that all connections are tight and secure.TV CONNECTORS7Barcode35*10.5mmREMOTE CONTROL4SPECIFICATIONS6When there is something wrong with your TV, you can try turning o the TV and restarting it. You can also refer to the following chart for problem and solution tips. If the problem cannot be resolved, please contact Hisense for additional assistance.Your TV aslo contains material that can be recycled and reused. For disposal or recycling information, contact your local authorities or the Electronic Products Recycling Association at http://www.eprassociation.ca to nd a recycler in your area.• Confirm power cord is plugged into the AC outlet and the AC outlet is getting electricity.• Attempt to power on unit using the power button on both the TV and the Remote.• Check for the correct output connection on the external source and for the correct input connection on the TV.• Make sure you have made the correct selection for the input mode for the incoming signal.• Check the volume settings.• Check if Mute mode is set "on" .• Check network physical connection, make sure connection is correct.• Enter "Menu" , "Network" , "Configuration" , make sure configuration is correct according to your network service provider.• Enter "Menu" , "Network" , "Configuration" , "Connection Test" to make sure that network connection test is successful.• You need a broadband (high speed) Internet service with a speed of no less than 1.5 Mbps.• Connect the TV to the internet through your router by an Ethernet Cable or wireless. If connection fails, check with your internet service provider or router manufacturer to determine if there is a firewall, content filter, or proxy settings that may block the TV from accessing the internet.• Before calling for service, check the following information for possible solutions to problems you may experience. If none of these solutions work, turn off the TV, then turn it on again.• Caution: Do not try to repair the TV yourself. Refer all servicing to qualified repair personnel.POSSIBLE SOLUTIONSSYMPTOMSNo sound or picturePicture is normal, but no soundNetwork connection fail.Connect Netix fail.I have connected an external source to my TV and I get no picture and/or sound.How do I get easy IPTV to work on my TV?HELP TOPICS9• Check network physical connection, make sure connection is correct.• Enter "Menu" , "Network" , "Configuration" , make sure configuration is correct according to your network service provider.• Enter "Menu", "Network", "Applications", "Netflix", "Deactivation" to reset "Netflix" account. Turning the TV On for the First Time8Note: If you are using a cable or satellite box and you have connected it to the TV using a Coaxial cable, you should select the cable option. Be sure the cable or satellite box is turned on before starting the channel scan. If you use a cable or satellite box connected to A/V, Component or HDMI, you don't need to scan for channels.INSTALLING A WALL-MOUNT BRACKET31Make sure the TV is laid face-down on a clean, safe, and cushioned space, remove the original screws in the bracket holes on the TV back.If you want to attach the TV to a wall-mount bracket (not provided), you should rst remove the stand if it is pre-attached (see Step 1). SPACER x4Place the provided spacers in the corresponding bracket holes. Attach purchased bracket (1.5mm to 2.5mm thickness) on the TV with 4 screws which are in the accessories bag. Follow instructions provided with the wall-mount bracket.9.5 ~ 11.5 mmWall-Mount BracketScrewSpacerThe TV's rear coverWall-Mount hole pattern VESA (mm)Wall-Mount screw size (mm)2Follow instructions provided with the Wall-Mount bracket.• If you are not sure of your ability to do complete the installa-tion, contact a professional installer or service technician for assistance. The manufacturer is not responsible for any damages or injuries that occur due to mishandling or incorrect assembly.• The selected screws are 9.5 ~ 11.5 mm in length when measured from the attaching surface of the TV's rear cover. The diameter and length of the screws differ depending on the Wall-Mount Bracket model.Note: These 4 screws which got from back cover mount hole could not be used any more. ACCESSORIES LIST1• User Manual • Quick Setup Guide • Warranty Card • Remote Control• Battery x 2 Spacer for 40K366WN• Screw (M5 x 12mm) x 4 • Screw (M4 x 12mm) x 6 • Screw (ST4 x 14mm) x 2 • Wall-mounted screw (M6 x 30mm) x 4 Spacer for 46K366WN • Screw (M5 x 12mm) x 4 • Screw (M4 x 12mm) x 6 • Screw (ST4 x 14mm) x 2• Wall-mounted screw (M6 x 45mm) x 4 INSTALLING THE STAND2Follow the illustrations below to complete the installation steps. M6 x 30mm(40K366WN)/M6 x 45mm(46k366WN)Wall monuted-screws12Secure the stand column to the base plate with the 4 screws (M4 x 12) provided.3Secure the stand cover to the stand column vertically with the 2 screws (M4 x 12) provided.4Secure the stand cover to the stand column horizon-tally with the 2 screws (ST4 x 14) provided.Secure the stand to the TV with the 4 screws (M5 x 12) provided. 123Note:Product image is only for reference, actual product may vary in appearance. Carefully place your TV facedown on a soft, cushioned surface to prevent damage to the TV or scratching to the screen.Previous Next4.Use Mode Next: Network SettingUse ModeHome modeRetail modeHome mode default settings are recommended • Please press [ENTER] to start the wizard, then press [▲/▲] button to select your language: English, Spanish or French, select [Next] to confirm enter the Welcome screen. • In the Welcome screen introduced the available input devices and interfaces. • Please press [▲/▲] button to select the country where you will operate the TV.OPERATIONSMENULanguage settingCountry setting• Select the local time zone according to your region.• Daylight Saving: Set the Daylight Saving time for your area.Time zone setting• Select your Mode Setting: Home Mode or Retail Mode.• If you select Retail Mode, a message appears “Are you sure to change to retail mode?” Select “OK” to continue, or select “No” to change your selection.• Home Mode is the recommended setting which offers full functionality of the television. If you selected Retail Mode, Energy Saving is not realized.Use Mode• The Select Network : Connect your TV to access the network.• When the Network Setting menu opens, Hisense Service Terms and Conditions will appear. Press [◄/►] to scroll through the pages. Please read it carefully. If you want to access the internet, press the [Agree] button to set your TV’s network connections. Otherwise, press the [Disagree] button to enter the Channel search menu.• You can setup the network configuration in this menu. For more information, please refer to the section titled “Network Connection” and “Network Setup” in the user manual.Select Network• Press [▲/▲] to select your Tuner Mode: Antenna or Cable, press [ENTER] button to confirm.• Press [▲/▲] to set the Channel Installation: Scan or Skip Scan, press [ENTER] button to confirm. If you select “Scan”, your TV automatically starts Channel Installation available in your viewing area; If you select “Skip Scan”, your TV does not scan for channels; Depending on the reception condition, it may take up to 30 minutes or more to complete memorizing channels. Please allow the process to complete without interruption.• After scan, you will enter the complete interface. It will display all informations that you set just now and then you can press “Go” to exit the wizard. Channel SearchVideo Eect:Connect an outdoor VHF/UHF antenna.ANTConnect Headphone for audio out of the TV. HEADPHONE/AUDIOOUTORBEST (HDMI)BETTER(COMP)GOOD(AV)HDMI / COMP / AV Connect an HDMI cable or Comp/AV Adapter from an external A/V equipment.LAN Connect an ethernet cable to access a network or the Internet. TV also features wireless connectivity.LANLANConnect an optical cable from an external digitalaudio system.DIGITAL AUDIO OUTDIGITALAUDIO OUTVGA & VGA AUDIO Connect a VGA cable and an audio cable from the PC.AUDIO INORConnect a USB device for browsing photos, music and movies.USBMobile Hard DiskVHF/UHF AntennaCableANT OUTYPBPRL -AUDIO- RVIDEOAV INCOMPONENT INYPBPRL -AUDIO- RVIDEOAV INCOMPONENT IN400 × 400 (46K366WN)200 × 200 (40K366WN)M6 (46K366WN) M6 (40K366WN) 40K366WN 46K366WN Previous Next5.Select Network Next: Channel SearchSelect Network Wired NetworkWireless NetworkConnect a wireless network with Wi-FiSkipWeightLCD Panel Minimum size(diagonal)Screen resolution40K366WN 46K366WNModel NameDimensionWithout StandWidth: 36.3 inches (921.8 mm)Height: 21.9 inches (555.2 mm)Depth: 2.3 inches (57.9 mm)Width: 41.6 inches (1057 mm)Height: 24.84 inches (631 mm)Depth: 2.4 inches (61 mm)Width: 36.3 inches (921.8 mm)Height: 24.1 inches (611.2 mm)Depth: 8.9 inches (225 mm)25.4 lbs (11.5 kg)28.7 lbs (13 kg)40 inches34.2 lbs (15.5 kg)39.6 lbs (18 kg)45.8 inches1920 x 1080 1920 × 1080Audio power 7 W + 7 W 8 W + 8 WPower consumptionPower supplyReceivingsystemsPower consumption120 V ~ 60 HzReceiving channelsTuner type Environmental conditionsVHF: 2~13 UHF: 14~69 CATV: 1 ~ 125Digital Terrestrial Broadcast (8VSB): 2 ~ 69Digital cable (64/256 QAM): 1 ~ 135NTSCATSC / QAMComponent InputVGA Input VGA (640×480 / 60 Hz), SVGA (800×600 / 60 Hz), XGA (1024×768 / 60 Hz)480 I / 60 Hz, 480 P / 60 Hz, 720 P / 60 Hz, 1080 I / 60 Hz, 1080 P / 60 HzHDMI Input RGB / 60 Hz (640×480, 800×600, 1024×768)YUV / 60 Hz (480 I, 480 P, 720 P, 1080 I, 1080 P)Frequency synthesizedTemperature: 41°F ~ 95°F (5°C ~ 35°C)Humidity: 20% ~ 80% RHAtmospheric pressure: 86 kPa ~ 106 kPaWidth: 41.6 inches (1057 mm)Height: 27.1 inches (687.5 mm)Depth: 9.8 inches (250 mm)With StandAnalogDigitalWithout StandWith Stand Power on/offDecrease volumeMedia content controlfunction buttonsReturn to the previous menuIncrease volumeMENU buttonDash buttonSelect a digital sub-channel▲/▲/▲/▲Navigate Up / Down / Left / Rightor adjust OSD settingsSet the sleep timerSelect picture modeSelect sound modeMUTE buttonEnter TV sourceDirect channel selectionAdjust Closed Caption (CCD) modeAudio select buttonDisplay the information bannerASPECT buttonClose the menuNext channelGo to the previous channelPrevious channelOpen the Hi-Smart Home MenuSelect input sourceInfra-red transmitterOpen the DTV program guide(if available)Select VGA / HDMI sourceSpecial function buttons(see Notes)HiMedia (Digital Media Player)NOTE:1. Illustrations are for your reference only.2. Red/Green/Yellow/Cyan buttons are used for Electronic Program Guide (EPG) . After pressing the [GUIDE] button when viewing digital channels, the same color buttons will appear with explanations in the on-screen display (OSD) . Follow the steps shown in the OSD.Power inputLAN HDMI3/ARC HDMI2DIGITALAUDIO OUT YPBPRAUDIOVIDEO LRAV INCOMPONENT INTV Bottom ViewTV Side ViewANT/CABLEHDMI 1/DVI USB 1USB 2DC 5V 0.5A(MAX)VGAPC/DVI AUDIO INPC INAUDIO OUTMAKING CONNECTIONS5Channel SearchPlease allow 30 minutes to complete.30%Stop6. Channel SearchATV Channels added:0DTV Channels added:0Display the favorite channel listSelect Component / VGA / HDMI source4Secure the stand column to the base plate with the 4 screws (M4 x 12) provided.Secure the stand cover to the stand column vertically with the 2 screws (M4 x 12) provided.Secure the stand cover to the stand column horizon-tally with the 2 screws (ST4 x 14) provided.Secure the stand to the TV with the 4 screws (M5 x 12) provided.

Navigation menu