Hisense Electric LCDD0022 Part15 Subpart B-LCD Monitor User Manual W9HLCDD0022 1

Hisense Electric Co., Ltd. Part15 Subpart B-LCD Monitor W9HLCDD0022 1

Contents

W9HLCDD0022_user Manual 1

For Flat Panel TV1K360 Series 22INSTALLING THE STAND3INSTALLING A WALL-MOUNT BRACKET4MAKING CONNECTIONS8SPECIFICATIONS6CHOOSE YOUR PICTURE MODE7CHOOSE YOUR TUNER MODE1ACCESSORIES LISTCheck the jacks' for position and type before making any connections. Loose connections can result in image or color problems. Make sure that all connections are tight and secure.物料号：条形码定位框 35x10.5mmCY-G1. If you want to attach the TV to a wall-mount bracket (not provided), you should first remove the stand if it is pre-attached. Make sure the TV is laid face-down on a clean, safe, and cushioned surface.2. Attach purchased bracket (1.5~2.5 mm thickness) on the TV with the 4 screws in the Screw D pack.3. Follow instructions provided with the wall bracket.If you are not sure of your ability to complete the installation, contact a professional installer or service technician for assistance. The manufacturer is not responsible for any damages or injuries that occur due to mishandling or incorrect assembly.Be sure to use the provider spacers between the TV and the bracket when attaching the mount.To prevent internal damage to the TV and ensure the TV is mounted securely, use only the 4 screws in the Screw D pack.Wall-mount hole pattern VESA (mm)200 × 200Wall-mount screw size (mm)M6Screws B9.5~12.5 mm Wall-mount BracketScrewSpacerthe TV’s rear coverMENU Display the on-screen menu to setup your TV’s features.INPUT Select the different input signal sources.Adjust the volume.CH /VOL /Select the channel.(Power button) Turn on the TV or put the TV in standby mode.Caution: The TV continues to receive power even in standby mode. Unplug the power cord to disconnect power.Item DescriptionANT/CABLE Connect an antenna or cable TV to this jack.HDMIHDMI (High-Definition Multimedia Interface) provides an uncompressed, all digital audio/video interface between this TV and any HDMI-device, such as a set-top box, Blu-ray disc player, or A/V receiver.COMPONENT IN Connect to a DVD player, Digital Set-Top-Box, or other A/V devices with component (YPBPR) video and audio output jacks.AV IN Connect to the composite video and audio (L/R) output jacks on external video devices.VGAPC/DVI AUDIO IN Connect to a PC or other devices with a VGA or DVI interface.HEADPHONE Connect headphone for private listening.DIGITAL AUDIO OUT Connect an audio amplifier to this jack.USB Port for Digital Media Player and for software update. Secure the stand to the TV with the 4 Screws A (M5 x 12).Connect to a personal computer’s video and audio output connector.Connect Headphone for audio out of the TV. Connect a digital audio device to this jack.Connect to a broadcast antenna or cable TV.VGA & PC / DVI AUDIO INANT/CABLE INHEADPHONEBETTERAvailable devices: DVD, Blu-ray player,Audio Video Receiver, cable box, satellite receiver, game station.HDMI IN BESTHDMIAV INGOODConnect the composite video and audio output jacks of your legacy A/V equipment, such as a VCR.VIDEOAV INRLAvailable devices: DVD, Blu-ray player, Audio Video Receiver, cable box, satellite receiver, game station. COMPONENT INRLLYCOMPONENT INPBPRFeatures, appearance and specifications are subject to change without notice.If you encountered diculty when setting up your TV, we suggest you refer to the Trouble Shooting tips in the User Manual.User Manual Quick Setup Guide Remote ControlScrew A (M5 × 12) × 8Screw B (M6 × 30) × 4Spacer × 4Batteries: AAA × 2Carefully place your TV facedown on a soft, cushioned surface to prevent damage to the TV or scratching to the screen.Dial:1-888-935-8880 (Toll Free) Email: CSR@hisense-usa.com http://www.hisense-usa.comScrew B (M6×30)Spacer × 4Bracket (1.5~2.5 mm)AC power cordHDMI1 ARC HDMI2USBHEADPHONELY PBPRRCOMPONENT IN5VIEWING THE REMOTE CONTROLDIGITAL AUDIO OUT1. Slide the back cover to open the battery compartment of the remote control. Press [▲／▼] to select your Tuner Mode: Antenna or Cable, press [ENTER] button to confirm.2. Insert two AAA size batteries. Make sure to match the (+) and ( - ) ends of the batteries with the (+) and ( - ) ends indicated in the battery compartment.3. Close the battery compartment cover. 1Gently push and slide 2Insert the batteries 3Gently push and slide1. Press [▲／▼] to select your Picture Mode: Home Mode or Retail Mode, press [ENTER] button to confirm. 2.If you select Retail Mode, a message appears “If you select Retail Mode, then Energy saving is not realized. Are you sure?” Select “Yes” to continue, or select “No” to change your selection. 3. For energy saving, we kindly suggest you select the Home Mode.Initial Setup Picture ModeChoose Your Picture Mode: Home ModeRetail Mode Back Select Next EXIT ExitInitial Setup TunerPlease selsct your tuner mode: AntennaCable Back Select Next EXIT ExitPC/DVI AUDIO INVHF/UHF AntennaCableANT OUTORORDIGITAL AUDIO OUT HDMI 3/DVIANT/CABLEVGAPC/DVI AUDIO INPC INVIDEOAV INL RMENUINPUTCHVOLVOLCHGo to the previous channelFunction buttons (not available)Confirm selectionsClose the menu▲/▲/▲/▲Move Up/Down/Left/Right or adjust settingsMenu buttonDisplay the current timeMute buttonDecrease volumeIncrease volume Next channelPrevious channelDisplay the channel nameDisplay the information bannerDirect channelselectionDash button selecta digital sub-channelMedia content controlfunction buttonsAdjust closed caption modeDisplay favorite listSet the sleep timerAudio select button Mono/Stereo/SAP operationSelect sound modeSelect picture modeSelect TV AV VGA USB source Select Component source Select HDMI sourceTVHDMISLEEPCCDMENUENTEREXITVOLDISPLAYFAV.CHTIMEMTS/SAPSOUNDASPECTPICTURECOMPONENTAV VGA USBCHLASTGUIDEEN-22652AMUTECH.LISTOpen the DTV program guide (not available)Select input sourcePower on/offRemote sensorZoom buttonWARNINGCAUTIONNOTESBack ViewStand coverStand columnRidge GrooveAlign the front of the stand column with the front of the base, then insert the stand column into the base making sure that the groove in the stand column aligns with the ridge in the base. Secure the stand column to the base with 3 Screws A (M5 x 12) .Align the stand cover with the stand column, then secure the stand cover to the stand column with 1 Screw A (M5 x 12) . Make sure that the bottom of the stand cover is flush against the top of the stand column. Model 40K360 50K360DimensionWithout StandWidth: 36 inches (922 mm)Depth: 2.3 inches (58 mm)With StandWidth: 36 inches (922 mm)Height: 24 inches (607 mm)Width: 36 inches (922 mm)Height: 21.7 inches (552 mm)Depth: 8.9 inches (225 mm)WeightWithout Stand 24.3 lbs (11kg)With Stand 27.6 lbs (12.5kg)Screen size(diagonal) 40 inchesScreen resolution 1920 × 1080Audio power 7 W + 7 WPower consumption Please refer to the rating label.Power supply 120 V ~ 60 HzReceiving systemsAnalog NTSCDigital ATSC / QAMEnvironmental conditionsTemperature: 41°F ~ 95°F (5°C~ 35°C)Humidity: 20%-80% RHAtmospheric pressure: 86 kPa - 106 kPaComponent Input 480 I / 60 Hz, 480 P / 60 Hz, 720 P / 60 Hz, 1080 I / 60 Hz, 1080 P / 60 HzVGA Input VGA (640×480 / 60 Hz), SVGA (800×600 / 60 Hz), XGA (1024×768 / 60 Hz)HDMI Input RGB / 60 Hz (640×480, 800×600, 1024×768)YUV / 60 Hz (480 I, 480 P, 720 P, 1080 I, 1080 P)Height: 26.9 inches (683 mm)Width: 36 inches (922 mm)Height: 22 inches (552 mm)Depth: 9.8 inches (250 mm)3Depth: 9.8 inches (250 mm)35.3 lbs (16kg)40.6 lbs (18.4kg)50 inches

Navigation menu