Hisense Electric LCDD0017 Part15 Subpart B-LCD Monitor User Manual

Hisense Electric Co., Ltd. Part15 Subpart B-LCD Monitor

UserManual.wiki >

Hisense Electric >

LCDD0017 User Manual

W9HLCDD0017_User Manual

LCD TVUSER MANUALEnglishLTDN46V86USBeforeusing the TV, Please read this manual thoroughly, retain it for future reference.

iiHisense LTDN46V86US46" LCD TVContentsCHILD SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1Important safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3Installing and removing the stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Installing the stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3Removing the stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4Installing a wall-mount bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4TV components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4Front and side controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4Back connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5Using the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Installing remote control batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6Aiming the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7Making connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Connecting the power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7Selecting a location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8Connecting an HDMI device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8Connecting a component video device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8Connecting an antenna, cable TV, or satellite TV box . . . . . . . . . . . . . . . . . . . .9Connecting a VCR, camcorder, or game console . . . . . . . . . . . . . . . . . . . . . . . .9Connecting a computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9Connecting a home theater system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Connecting headphones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Turning on your TV for the ﬁrst time . . . . . . . . . . . . . . . . . . . . . . . . . .11Understanding the basics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11Turning your TV on or oﬀ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Selecting the video input source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Selecting a channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Adjusting the volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Displaying program information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Navigating the menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12On-screen menu overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Adjusting the picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13Choosing the display format (aspect ratio) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Adjusting the sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14Selecting the audio mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14Changing channel settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14Setting parental controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14Adjusting TV settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

iiiVideo and audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Speciﬁcations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17Legal notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

1As you enjoy your new product, keep these safety tips in mindThe issueThe home theater entertainment experience is a growing trend, and larger TVs are popular purchases. However, TVs are not always supported on the proper stands or installed according to the manufacturer’s recommendations. We and the consumer electronics industry are committed to making home entertainment enjoyable and safe.TVs that are inappropriately placed on dressers, bookcases, shelves, desks, speakers, chests, or carts may fall over and cause injury.Tune into safety噝One size of TV stand does not fit all. Use only a TV stand rated for the weight of your TV.噝Carefully read and understand all enclosed instructions for proper use of this product.噝Don’t let children climb on or play with entertainment system furniture and TVs.噝Don’t place TVs on furniture that can easily be used as steps, such as a crate or chest of drawers.噝Remember that children can become excited while watching a program, especially on a “larger-than-life” TV. Make sure that you place or install the TV where it cannot be pushed, pulled over, or knocked down.噝Make sure that you route all cords and cables so that they cannot be pulled or grabbed by curious children.Wall mountingIf you decide to wall mount your TV, always remember:噝One size of wall mount does not fit all. Use only a wall mount rated for the weight of your TV and that has been recommended by this TV manufacturer, listed in this manual, or otherwise listed by an independent laboratory as suitable for your TV.噝Follow all instructions supplied by the TV and wall mount manufacturers.噝If you have any doubts about your ability to safely wall mount your TV, get help from a professional installer.噝Make sure that the wall where you are mounting the TV is appropriate. Some wall mounts are not designed to be mounted to walls backed with steel studs or cinder blocks. If you are unsure, ask a professional installer.噝TVs can be heavy. At least two people are required for safe wall mount installation.fCHILD SAFETYIt makes a difference how and where you use your flat panel display

2Important safety instructionsImportant safety instructions1Read these instructions.2Keep these instructions.3Heed all warnings.4Follow all instructions.5Do not use this apparatus near water.6Clean only with a dry cloth.7Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.8Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliﬁers) that produce heat.9Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not ﬁt into your outlet, consult an electrician for replacement of the obsolete outlet.10 Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.11 Only use attachments/accessories speciﬁed by the manufacturer. 12 Use only with a cart, stand, tripod, bracket, or table speciﬁed by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13 Unplug this apparatus during lightning storms or when unused for long periods of time.14 Refer all servicing to qualiﬁed service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.15 The wall plug is the disconnecting device. The plug must remain readily operable.16 An apparatus with a three-prong, grounding-type plug is a Class I apparatus, which needs to be grounded to prevent possible electric shock. Make sure that you connect this Class I television to a grounding-type, three-prong outlet.17 Remote control batteries should not be exposed to excessive heat such as sunshine, ﬁre, or the like.18 The apparatus should not be exposed to dripping or splashing, and no objects ﬁlled with liquids, such as vases, should be placed on the apparatus.WarningsElectric shock hazardTo reduce the risk of ﬁre or electric shock, do not remove any cover or expose the device to rain or moisture. No user-serviceable parts are inside. Refer servicing to qualiﬁed service technicians.LightningFor added protection for your device receiver during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the power outlet and disconnect any antenna or cable system. This helps prevent property damage and personal injury from lightning and power line surges.Power linesAn outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.Handling the LCD paneltYour TV’s screen is made of glass. Do not drop your TV or hit, jolt, or press hard against the LCD panel. If the screen breaks, be careful of broken glass. tIf the LCD panel is broken, make absolutely sure that you do not touch the liquid in the panel. This may cause skin inﬂammation. tIf the liquid gets in your mouth, immediately gargle, rinse, and consult with your doctor. Also, if the liquid gets in your eyes or touches your skin, consult with your doctor after rinsing for at least 15 minutes or longer in clean water. Replacement partsWhen replacement parts are required, make sure that the service technician uses replacement parts speciﬁed by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in ﬁre, electric shock, personal injury, or other hazards.Safety checkAfter completing any service or repair to this device, ask the service technician to perform routine safety checks to determine that your TV is in correct operating condition.Power sourceOperate your TV only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied to your home, consult an electrician or your local power company.CautionsDamage requiring serviceUnplug this TV from the power outlet and refer servicing to qualiﬁed service personnel under the following conditions:tWhen the power supply cord or plug is damaged or frayed.tIf liquid has been spilled or objects have fallen into your TV.tIf your TV has been exposed to rain or water.CAUTIONRISK OF ELECTRIC SHOCKDO NOT OPENThis symbol indicates that dangerous voltage constituting a risk of electric shock is present within your TV. This label is located on the back of your TV.This symbol indicates that there are important operating and maintenance instructions in the literature accompanying your TV.

Installing and removing the stand 3tIf your TV does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions because incorrect adjustment of other controls may result in damage and will often require extensive work by a qualiﬁed technician to restore your TV to its normal operation.tIf your TV has been dropped or damaged in any way.tWhen your TV exhibits a distinct change in performance.Outdoor antenna groundingIf an outside antenna or cable system is connected to your TV, make sure that the antenna or cable system is grounded to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA No. 70, provides information with respect to correct grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of the antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.Note to CATV system installerArticle 820 of the National Electrical Code, ANSI/NFPA No. 40 provides guidance for correct grounding. Speciﬁcally, it states that the cable ground must be connected to the grounding system of the building as close to the point of cable entry as practical. CondensationMoisture will form on the TV if the TV is brought from cool surroundings into a warm room or if the temperature of the room rises suddenly. When this happens, the TV's performance may be impaired. To prevent this, let the TV stand in its new surroundings for about an hour before switching it on, or make sure that the room temperature rises gradually. Condensation may also form during the summer if the TV is exposed to the breeze from an air conditioner. In such cases, change the location of the TV. Mobile telephone warningTo avoid interference with your TV picture and sound, operating problems, or even damage, keep your cordless and cellular telephones away from the TV.End of life directivesYour TV contains tin-lead solder and a ﬂuorescent lamp containing a small amount of mercury. Disposal of these materials may be regulated for environmental reasons. Your TV also contains material that can be recycled and reused. For disposal or recycling information, contact your local authorities or the Electronic Industries Alliance at www.eia.org to ﬁnd a recycler in your area.Non-active pixelsThe LCD panel contains almost 3 million thin ﬁlm transistors, which provide exceptionally sharp video quality. Occasionally, a few non-active pixels may appear on the screen as a ﬁxed blue, green, or red point. These non-active pixels do not adversely aﬀect the performance of your TV, and are not considered defects.AccessoriesMake sure the following accessories are included in the box with your TV:tRemote controltUser ManualtAAA batteries (2)tStandtPower cordtQuick Setup GuideInstalling and removing the standYou must install your TV into the stand in order for it to stand upright on a cabinet or other ﬂat surface. If you intend to mount your TV on a wall or other vertical surface, you must remove the stand column.Warning: Before attampting assembly or removal of the stand, unplug the AC power cord.Cautions:tRead these instructions carefully before you try to assemble the stand or remove the stand column.tMake sure that you handle the TV carefully when attempting to assemble or remove the stand. If you are not sure of your ability to do this, contact a professional installer or service technician. Hisense is not responsible for any damages or injuries that occur because of mishandling or incorrect assembly.tUse a soft cushion or covering to prevent scratching or damage to the TV screen or cabinet.Installing the standNote: Your TV may diﬀer from the illustrations shown.To install the stand:1Remove the stand from the box and place it on a table or bench.2Lay the TV (screen down) on the edge of the table or bench. Make sure that you put a soft cloth or cushion between the table or bench and the TV.Antenna lead-in wireGrounding clampAntenna discharge unitGrounding conductorsGround clampsPower service grounding electrode systemElectric service equipment21345671234567

4TV components3Align the base with the TV, then secure the stand to the TV with the four screws (M6 x 12) provided.4Carefully lift the TV into an upright position.To remove the stand, see the following procedure.Removing the standYou must remove the stand before you can wall-mount the TV.Note: Your TV may diﬀer from the illustrations shown.To remove the stand:1Lay the TV (screen down) on the edge of the table or bench. Make sure that you put a soft cloth or cushion between the table or bench and the TV.2Remove the four screws holding the stand to the TV, then remove the stand.Installing a wall-mount bracketIf you want to attach the TV to a wall-mount bracket (not provided), you should ﬁrst remove the stand, if it has been installed.Warning: These instructions are for use by qualiﬁed service person only. To reduce the risk of hazards, do not perform any servicing other than that contained in the operating instructions unless you are qualiﬁed to do so.To install a wall-mount bracket:1Lay your TV face down on a table or bench. Make sure that you put down a soft cushion or cloth so that your TV is not scratched.2Remove the pedestal stand. See “Removing the stand” above.3Secure the wall-mount bracket to the back of your TV using the four screws provided with the bracket.TV componentsFront controlsBaseplateItem Name DescriptionMENU Press to open the on-screen menu.INPUT Press to open the INPUT SOURCE menu. For more information, see “Selecting the video input source” on page 11.VOL / VOL In TV mode, press to increase or decrease the volume.In menu mode, press to move right or left or to adjust menu settings.CH /CH In TV mode, press to select the next or previous channel.In menu mode, press to move up or down. (power) Press to turn on the TV or put the TV in standby mode. Caution: The TV continues to receive power even in standby mode. Unplug the power cord to disconnect power.Power indicator Lights red when your TV is in standby mode.Turns oﬀ when the TV is on.Remote control sensorReceives signals from the remote control. Do not block. For more information, see “Aiming the remote control” on page 7.1234567

TV components 5lortnoc etomeRsnoitcennoc kcaBItem Name DescriptionPOWER Press to turn on the TV or put the TV in standby mode.Caution: The TV continues to receive power even in standby mode. Unplug the power cord to disconnect power.COMP Press repeatedly to select a device connected to the COMP IN jacks.AV Press repeatedly to select a device connected to the AV IN jacks.ASPECT Press to select the video display format. For more information, see “To adjust the picture:” on page 13.GUIDE Press to open the DTV program guide (if available) when viewing digital channels. For more information, see “Displaying program information” on page 12.VOL / VOLPress to increase or decrease the volume.MENU Press to open the on-screen menu.Press to move up, down, left, or right in on-screen menus or to adjust menu settings.ENTER Press to conﬁrm selections in on-screen menus or to open sub-menus.INPUTENTER7 8 0 HDMISOUNDPICTUREMENUCHVOLMUTEAV COMP VGAASPECTEXITTV1 23 6 5 4 7 8 9 0 LASTGUIDEDISPLAYMTS/SAPCCDTIMESLEEP123456789#Item DescriptionANT/CABLE INConnect an antenna or cable TV to this jack. For more information, see “Connecting an antenna or cable TV (no box)” on page 11.PC IN VGAConnect the video (VGA) for a computer to this jack. For more information, see “Using VGA” on page 14.PC IN AUDIOConnect the audio for a computer or a DVI device to this jack. For more information, see “Using VGA” on page 14 or “Using DVI (same as HDMI but requires a sound connection)” on pages 8 or 11.HDMI1/HDMI2Connect HDMI devices to these jacks. An HDMI cable carries both video and sound. You do not need to make an audio connection for an HDMI device.For more information, see “Using HDMI (best)” on pages 8, 11, or 14.When connecting a DVI device using an HDMI-DVI adapter, connect the device to the HDMI1 or HDMI2 jack. (headphone)Connect headphones to this jack. For more information, see “Connecting headphones” on page 15.Service port For software update only. Do not use.COMPONENT Y/PB/PR and AV INConnect the video for a component video device to these jacks. Connect the video cable from a composite video device to the “Y” jack. For more information, see “Using component video (better)” on pages 9 or 12. DIGITAL OUT Connect an audio ampliﬁer to this jack.For more information, see “Using digital audio” on page 15.AC IN Connect the supplied power cord here.123456789586432719

6Using the remote controlUsing the remote controlInstalling remote control batteriesTo install remote control batteries:1Press down on the battery compartment cover lock, then remove the remote control cover.2Insert two AAA batteries into the battery compartment. Make sure that the + and – symbols on the batteries match the + and – symbols in the battery compartment.3Replace the cover. Make sure that the lock snaps into place.Battery precautions: tDispose of batteries as hazardous waste.tDo not mix batteries of diﬀerent types.tDo not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries and can cause old batteries to leak.tRemove batteries as soon as they become inoperable. Chemicals that can leak from the batteries can cause a rash. If the batteries leak, clean the battery compartment with a cloth.tIf the remote control is not used for an extended period of time, remove the batteries.tDo not expose batteries to excessive heat such as sunshine, ﬁre, or other heat sources.Numbers Press the number buttons to enter channel numbers or the parental control password.For more information, see “Selecting a channel” on page 11.. (dot) Press to select a digital sub-channel. See “Selecting a channel” on page 11.Program guide (EPG) function buttonsAfter pressing the GUIDE button when viewing digital channals, the same color buttons will appear with explanations in the on-screen display (OSD). Follow the steps shown in the OSD.CCD Press to turn closed captioning on or oﬀ. For more information, see “Adjusting TV settings” on page 15.MTS/SAP When viewing analog (non-digital) channels, press to select STEREO, SAP (secondary audio language), or MONO.When viewing digital channels, press to select the audio track. For more information, see “Selecting the audio mode” on page 14.TV Press to select the TV as the video input source. For more information, see “Selecting the video input source” on page 11.INPUT Press to open the INPUT SOURCE menu, then press or to select the video input source you want. For more information, see “Selecting the video input source” on page 11.HDMI Press repeatedly to select a device connected to one of the HDMI jacks.VGA Press to select VGA mode.SOUND Press to select the sound mode. You can select Standard, Speech, User, and Music. For more information, see “Selecting the audio mode” on page 14.PICTURE Press to select the video mode. You can select Vivid, Standard, Theater, Energy Saving, Sports, and Custom. For more information, see “Adjusting the picture” on page 13.CH / Press to go to the next or previous channel in the channel list. For more information, see “Turning on your TV for the ﬁrst time” on page 11 and “Selecting a channel” on page 11.DISPLAY Press to display the information banner. For more information, see “Displaying program information” on page 12.MUTE Press to mute the sound. Press again to restore the sound.EXIT Press to close the on-screen menu.LAST Press to go to the last viewed channel. For more information, see “Selecting a channel” on page 11.TIME Press to display the current time.SLEEP Press to set the sleep timer. For more information, see “Adjusting TV settings” on page 15.Item Name Description1011121314151617181920212223242526

Making connections 7Aiming the remote controlTo aim the remote control:tPoint the remote control towards the remote sensor on the front of your TV.Notes:tDo not expose the remote control to shock or liquids.tDo not use the remote control in an area with high humidity.tDo not place the remote control in direct sunlight.tDo not place objects, such as furniture, between the remote control and the remote sensor.tThe remote control may not work if direct sunlight or bright light shines on the remote sensor. Either move your TV or change the angle at which you use the remote control.Making connectionsBefore you make any connections:tCheck the plugs on the ends of cables to make sure that they are the correct type before you try plugging them into jacks on the TV.tMake sure that all plugs are securely inserted into the jacks. Loose connections can result in image or color problems.tWhen connecting devices to the TV, make sure that the TV and the device are turned oﬀ and that the power cords are unplugged.Connecting the powerTo connect the power cord:tConnect the power cable to the AC IN jack on the back of the TV, then connect the other end to a power outlet.Notes:tThe AC plug on the TV may be diﬀerent from the one shown.tMake sure that you only use the type of power source indicated on the marking label.tAlways unplug the power cord when not using the TV for a long period of time.INPUTENTER7 8 0 HDMISOUNDPICTUREMENUCHVOLMUTEAV COMP VGAASPECTEXITTV1 23 4 5 67 8 9 0 LASTGUIDEDISPLAYMTS/SAPCCDTIMESLEEPPower cordPower outlet

8Making connectionsSelecting a locationYou should select a location for the TV:tWhere direct light does not reﬂect on the screentThat has indirect and soft lightingtWhere the TV has access to an antenna or cable TV connectiontWhere the TV has access to a power outletNote: Watching TV in total darkness or with a reﬂection on the screen may cause eye strain.Connecting an HDMI deviceNote: If your device has an HDMI connection, we recommend you use it to get the best picture and sound quality possible.To connect an HDMI device:tConnect one end of an HDMI cable (not included) to the HDMI 1, HDMI 2 jack on the back of your TV, then connect the other end of the cable to the HDMI OUT jack on the HDMI device. Note: To connect a DVI device, use a DVI to HDMI adapter cable to connect to the HDMI jack on the TV, then connect an audio cable to the PC IN AUDIO jack on the back of the TV.To play from the HDMI device:1Turn on the TV, then press INPUT. The INPUT SOURCE menu opens.2Press or to select HDMI1, HDMI2, then press ENTER.Note: You can also press HDMI once to select HDMI1, twice to select HDMI2.3Turn on the HDMI device, then set it to the correct mode. Refer to the instructions that came with the HDMI device.Connecting a component video deviceComponent cables often have red, green, and blue color-coded video connectors and red and white audio connectors. Match the colors when making connections.To connect a component video device:1Connect a component video cable to the COMPONENT OUT jacks on the component video device.2Connect the other end of the component video cable to the COMPONENT IN jacks on the side of your TV.3Connect an audio cable to the AUDIO OUT jacks (L/R) on the component device.4Connect the other end of the audio cable to the COMPONENT AUDIO-R and AUDIO-L jacks on the back of your TV.To play from the component video device:1Turn on the TV, then press INPUT. The INPUT SOURCE menu opens.2Press or to select Component, then press ENTER.Note: You can also press COMP once to select Component.3Turn on the component video device and start playback. Refer to the instructions that came with the component video device.Back of TVHDMI deviceHDMI cableY BRL RCOMPAV VIDEO L RY Pb PrL RANT/CABLE IN DIGITAL AUDIO OUTBack of TVComponent video deviceComponent video cableAudio cable

Making connections 9Connecting an antenna, cable TV, or satellite TV boxIf you are connecting a satellite TV or cable box, you can use one of the following (if available):tBest - HDMI cabletBetter - Video component cablestGood - Video composite cabletAcceptable - 75-ohm coaxial cable.To connect an antenna, cable TV, or satellite TV box:tConnect one end of a 75-Ohm, coaxial cable to the ANT/CABLE IN jack on the back of the TV, then connect the other end of the cable to the antenna or cable TV wall jack.Notes:tWe recommend using a 75-Ohm, coaxial cable to reduce interference and noise that may be caused by radio wave transmissions.tDo not bundle the coaxial cable with the power cord or any other cables.tIf you are using an antenna and reception is not good, contact a service technician to adjust the antenna.Connecting a VCR, camcorder, or game consoleNote: If the VCR, camcorder, or game console has component jacks (better), or an HDMI jack (best), connect them using the best available connection.To connect a VCR, camcorder, or game console:1Make sure that your TV’s power cord is unplugged and the VCR, camcorder, or game console is turned oﬀ.2Connect one end of a standard AV cable into the AV IN VIDEO jack on the back of the TV, then connect the other end of the cable to the AV OUT VIDEO jack on the external device.3Connect the audio connectors of the AV cable (the red and white connectors) to the AV OUT AUDIO jacks of the external device, then connect them to the AV IN L and R jacks on the back of your TV.To play the external AV device:1Turn on the TV, then press INPUT. The INPUT SOURCE menu opens.2Press or to select AV then press ENTER. Note: You can also press AV once to select AV.3Turn on the device, then start playback on the device.Connecting a computerTo connect a computer:1Make sure that your TV’s power cord is unplugged and the computer is turned oﬀ.2Connect one end of a VGA cable (not included) to the VGA jack on the back of the TV, then connect the other end of the cable to the VGA jack on the computer.ANT/CABLE jack on the back of the TVAntenna, cable TV, or satellite box75-Ohm coaxial cableANT/CABLE jack on the back of the TVHome antenna terminal(75 ohm)ANT/CABLECOMPAV VIDEO L RY Pb PrL RANT/CABLE IN DIGITAL AUDIO OUTVCR, camcorder, or game consoleAV cableBack of TVNote: Cables are often color-coded to connectors. Connect yellow to yellow, red to red, and white to white.ComputerVGA cableAudio cableNote:The VGA cable willl not supplied with product. We strongly recommend to use VGA cable with 2 cores as shown in the ﬁgure.

10 Making connections3Connect one end of an audio cable with a stereo mini-plug (not included) to the PC/DVI AUDIO IN jack on the back of the TV, then connect the other end of the cable to the AUDIO OUT jack on the computer.To play video from the computer:1Turn on the TV, then press INPUT. The INPUT SOURCE menu opens.2Press or to select VGA, then press ENTER.3Turn on the computer, then adjust the computer display properties as needed.Connecting a home theater systemConnecting using a digital audio cableTo connect using a digital optical cable:1Make sure that your TV’s power cord is unplugged and the home theater system is turned oﬀ.2Connect one end of a digital coaxial audio cable (not included) to the DIGITAL AUDIO OUT jack on the back of the TV.3Connect the other end of the audio cable to the digital coaxial input jack on the home theater system.Note: The DIGITAL OUTPUT jack only works with digital TV channels or when using an HDMI device.To play TV sound through a home theater system:1Turn on the TV and select a program to watch.2Turn on the home theater system and select the TV sound source, then adjust the volume to a comfortable level.Connecting headphonesWarning: When using headphones, adjust the headphone volume to avoid excessively loud volume which can damage your hearing.To connect headphones:tPlug the headphones (not included) into the (headphone) jack on the back of the TV.Note: The TV sound automatically mutes when headphones are connected.Back of TVHome theater systemDigital coaxial cable

Turning on your TV for the ﬁrst time 11Turning on your TV for the ﬁrst timeTo conﬁgure your TV:1Make sure that you have inserted the batteries in the remote control, connected your devices to the TV, and connected the AC power.2Press (Power), then wait several seconds. The Initial Setup screen opens (only the ﬁrst time you turn on your TV). Follow the prompts to complete the setup.3Press ENTER to start the wizard, the language select screen opens.45Press or to highlight Antenna or Cable depending onthe type of connection you have, then press ENTER. The Channel Scan screen opens.6Press or to select Scan, then press ENTER. The channel scan begins.Your TV automatically scans for available channels in your area and stores the channel information in the channel list. This may take several minutes. While scanning, the TV displays a progress report.Notes: tChannel scan is not necessary if you are using a satellite or cable box.tChannel scan can take up to 30+ minutes.tYou can press EXIT at any time to stop the auto scan, but you will need to run the auto scan again to create a channel list.Understanding the basicsTurning your TV on or oﬀTo turn your TV on or oﬀ (standby mode):1Plug the power cord into an AC power outlet.2Press (power). Your TV turns on.3Press again to turn oﬀ your TV. When you turn oﬀ your TV, it goes into standby mode.Warning: When your TV is in standby mode, it is still receiving power. To completely disconnect power, unplug the power cord.Note: If your TV does not receive an input signal for several minutes, it automatically goes into standby mode.Selecting the video input sourceTo select the video input source:1Turn on your TV, then press INPUT on the remote control or on the TV. The INPUT SOURCE menu opens.2Press or to highlight the video source you want, then press ENTER. Options include TV, AV, Component, VGA (computer), HDMI1 or HDMI2. Selecting a channelTip: If you are using a cable or satellite box, use the remote control that came with that device to change channels. To select a channel:tPress CH /CH to go to the next or previous channel.tPress the number buttons to enter the channel number you want, then wait for the channel to change, or press ENTER to change the channel immediately.Welcome to use the Wizard forinitial Setup!!Initial Setup WelcomePlease press [ENTER] to start thewizard.Please select your language: Select ENTER Next BackInitial Setup LanguageEnglishEspanõlFrançaisPress or to select the menu language you want, then press ENTER. The Tuner Mode screen opens.Select ENTER Next BackAntennaCableInitial Setup TunerPlease select your tuner mode:Select ENTER Next BackScanSkip ScanInitial Setup Channel ScanFirst，please connect cable and/orantenna.Start channel scan now?If you skip this step, the channelscan could be performed in Menu.

12 Understanding the basicstTo select a digital channel, press the number buttons to select the main digital channel, then press the dot (.) button, then the number buttons again to select the sub-channel. Wait for the channel to change or press ENTER to change the channel.Note: Button presses must be within three seconds of each other.tPress LAST to go to the last channel viewed.Adjusting the volumeTo adjust the volume:tPress VOL /VOL to to increase or decrease the volume.tPress MUTE to temporarily turn oﬀ all sound. Press MUTE again to restore the sound.Displaying program informationTo display program information:tPress DISPLAY to show an information banner. The information banner shows current program information such as channel number, video input source, and resolution.tDigital signal information—Displays channel number, station name, channel label (if preset), broadcast program name, TV rating, signal type, audio information, resolution, CC mode, current time, and current program start and end times when watching a digital channel.tAnalog signal information—Displays channel number, channel label (if preset), signal type, audio information, and resolution when watching an analog channel.tPress GUIDE to show the digital program guide, which may show a list of available programs, program times, and program summaries, depending on the information provided by the broadcaster.Navigating the menusOn-screen menu overviewUse the on-screen menu to conﬁgure the various operational settings of your TV. To access the menu, press MENU. The menus and their corresponding functions are described in the following table:ENTERMENUEXITENTERENTERPress to display the Main menu.Press to select menus, to adjust selected items, or move on-screen cursor left or right.Press to select the menu items.Press to conﬁrm your selection or enter a sub-menu.Press to close the menu or return to the previous screen.VideoPicture ModeLets you enable one of six preset viewing options optimized for diﬀerent viewing conditions.Brightness Lets you adjust the level of brightness on the screen. Increasing brightness can add more light to dark areas of the picture.Contrast Lets you adjust the level of picture contrast. Increasing the contrast adds more light to the white areas of the picture.Saturation Lets you adjust the level of color intensity.HUE Lets you adjust the overall color of the picture (only supported in TV/AV mode).Sharpness Lets you adjust the focus of the picture. Increase sharpness for a clearer picture, or decrease sharpness for a smoother picture.Color TemperatureLets you select one of three preset color temperature settings: Cool, Standard, or Warm.Advanced VideoAccesses advanced video settings such as DNR, Adaptive Luma Control, Flesh Tone.AudioBalance Lets you adjust the balance between the left and right speakers.Surround SoundLets you turn the surround sound eﬀect on or oﬀ.Equalizer Lets you select the audio frequency you want to adjust and change its value.SPDIF Type Lets you select the preferred audio format for SPDIF audio signals. SPDIF is only available on digital channels or when using an HDMI device. Choose from PCM,Dolby digital, or Oﬀ.OSD LanguageLets you select the language for the on-screen display. Choose from English, French, or Spanish.SetupOSDTimeout Lets you set the OSD timeout. You can select the time from 5 sec to 60 sec, and the step is5 sec. DPMS Use this setting when using your TV with a computer. When using a connected computer, lets the computer control if the screen is on or oﬀ.Time Setup Lets you conﬁgure the system clock and time zone settings. You can also choose to enable the Date/Time features and set up the sleep timer.Caption Lets you conﬁgure the settings for closed captioning (CC, also known as subtitles) in TV programs.Reset Default Lets you reset all operational settings to their default factory value. Do this only if any of the following conditions occurs:tThe system fails to respond to the remote control (make sure the remote control batteries are still working and that you are within the transmission range).tThe new conﬁguration settings cause unexpected results.tYou forget the system PIN.Auto Volume ControlLets you select whether to apply the audio settings for all input sources, as well as for both analog and digital TV channels (OFF), or only to the current one (ON).Screen Mode Lets you select the aspect ratio of the screen. Choose from Normal, Wide, Cinema or Zoom.

Adjusting the picture 13Note: Menu items that are not selectable are grayed out. Menus in this manual are described in TV mode, unless otherwise indicated.Adjusting the pictureTo adjust the picture:1Press MENU. The Main menu opens.2Press ENTER or . The Video menu opens.3Press or to highlight an option, then press or to adjust the option. You can select:tPicture Mode—Selects the picture mode. You can select: tVivid (a bright and vivid picture) tStandard (a standard picture)tCinema (a ﬁnely detailed picture)tUser (customized picture). Note: You can also press PICTURE on the remote control to select the picture mode.tBrightness–Lets you increase or decrease the brightness of the picture. Increasing the brightness can add more light to dark areas of the picture, while decreasing the brightness can add more darkness to light areas of the picture.tContrast–Lets you increase or decrease the contrast of the picture. Increase the contrast to adjust the white areas of the picture or decrease the contrast to adjust the black areas of the picture.tSaturation–Lets you adjust the intensity of the colors.tHUE–Lets you adjust the overall color of the picture (only supported in TV/AV mode).tSharpness–Lets you increase the sharpness level for clearer images or decrease the sharpness level for smoother images.tColor Temperature –Lets you change the color temperature. You can select the color temperature from three options: Cool, Standard, or Warm.tAdvanced Video–Lets you access and adjust advanced video settings, such as DNR, Adaptive Luma Control, Flesh 4Press MENU to return to the previous menu, or press EXIT to close the menu.Choosing the display format (aspect ratio)To choose the display format:tPress ASPECT on the remote control repeatedly to cycle through the available display formats. Options include:tNormal —Selects the correct aspect ratio to match the source image.tZoom —Enlarges the picture but may crop the top and bottom. tWide—Shows a full-screen picture.tCinema—Stretches the picture at the edges [21:9 aspect], but maintains a good aspect ratio at the center of the screen.ParentalChannel BlockLets you select certain channels to be blocked.Program BlockLets you select certain programs to be blocked.Input Block Lets you select certain input sources to be blocked.Change PasswordLets you set a new password for parental controls.Clean All Eliminates all channels (and presets) stored in the TV.TVTuner Mode Lets you select the signal source for your TV (Antenna or Cable).Channel ScanLets you initiate an automatic channel scan to set up the available channels in your TV.Channel SkipLets you select certain channels to eliminate from the available channels list.MTS Program) function. This lets you listen to a program using an alternative second language. Function availability depends on your TV provider.Audio LanguageLets you select the language track you prefer for viewing digital TV programs. Available options depend on your digital TV provider.SaturationHUELets you enable the SAP (Second Audio Tone.

14 Adjusting the soundAdjusting the soundTo adjust the sound:1Press MENU. The Main menu opens.2Press or to highlight Audio, then press ENTER or . The Audio menu opens.3Press or to highlight an option, then press or to adjust the option. You can select:tBalance—Adjusts the balance between the left and right audio channels.tSurround Sound —Turns the surround sound eﬀect on or oﬀ.tEqualizer—Lets you select the frequency you want to adjust and change its value.tSPDIF Type—Lets you select the preferred audio format for SPDIF audio signals. SPDIF is only available on digital channels or when using an HDMI device. Choose from PCM, Dobly Digital, or Oﬀ.Note: By selecting SPDIF Type, you can choose the digital audio output type.tAuto Volume Control—Lets you turn automatic volume control on or oﬀ. When this option is turned on, it keeps the audio in a preset range to eliminate large spikes in volume.4Press MENU to return to the previous menu, or press EXIT to close the menu.Selecting the audio modeTo select the audio mode:tPress SOUND on the remote control one or more times to cycle through the available sound modes. Options include Standard, Speech, User, and Music.3Press or to highlight an option, then press or to adjust the option. You can select:tTuner Mode –Lets you select Antenna or Cable.tChannel Scan–Lets you scan for channels that have signals and stores the channels information in memory. When you press CH or CH , your TV skips any channels that do not have a signal.tChannel Skip–Lets you delete a channel stored in memory. When you press CH or CH , your TV skips the channel you deleted. You can still tune to the channel using the number buttons on the remote control.tMTS –Lets you select the sound mode. You can select Mono, Stereo, or SAP (second audio program).tAudio Language –Lets you select the audio language for a program (if other languages are available).4Press MENU to return to the previous menu, or press EXIT to close the menu.Setting parental controlsParental controls let you prevent your children from watching inappropriate material on TV. When set, parental controls read the rating of the program (with some exceptions, such as news and sports) and deny access to programs that exceed the ratings level you select. To watch programs that exceed the selected rating, you must enter a password.To set parental controls:1Press MENU. The Main menu opens.2Press or to highlight Parental, then press ENTER or . The Parental menu opens.MTSChanging channel settingsTo change the channel settings:1Press MENU. The Main menu opens.2Press or to highlight TV, then press ENTER or . The TV menu opens.

Adjusting TV settings 153Press the number buttons to enter the four-digit password. The default password is 0000. You should change the password to a number you can remember. The Parental Controls menu opens.4Press or to highlight an option, then press or to adjust the option. You can select:tChange Password–Lets you change the password. The ﬁrst time you use this function, use the default password (0000). If you want to change it, ﬁrst enter the new password then enter the same password again.tChannel Block–Lets you block any channel you select.tInput Block–Lets you block the input source with this function. For example, if you want to block AV input, highlight AV, then press ENTER.The AV input will be blocked.tProgram Block– tA–Rating Enable is on.tB–U.S. TV Ratings: You can choose TV ratings according to the illustration on the screen.tC–The settings for U.S. Movie Ratings, Canada (English) Ratings, and Canada (French) Ratings follow Step B. If you want to block an unrated program, turn on this function. You can select all the ratings listed in the charts below.Note: On the MPAA RATING screen, press or to select the rating. That rating and all other higher ratings are blocked. 5Press EXIT to close the menu.Adjusting TV settingsTo adjust the setup:1Press MENU. The Main menu opens.2Press or to highlight Setup, then press ENTER or . The Setup menu opens.3Press or to highlight an option, then press or to adjust the option. You can select:tOSD Language–Press the right or left arrow buttons to choose the OSD Language. Choices include English, Spanish, and French.tScreen Mode–Press the arrow buttons to choose the screen aspect ratio. Choices include Normal, Wide, or Cinema to Zoom. You can also press the Aspect button on your remote control.tDPMS–Use this setting with a computer. When DPMS is on, the computer controls whether the screen is on or oﬀ. For example, if the computer is in sleep mode, the screen is switched oﬀ. If the computer is activated, the screen also is activated.tTime Setup–Lets you set the exact time. You can also set up Sleep Timer and Auto Sleep Time .U.S. TV ratings (age-based)These ratings are determined by the Federal Communications Commission (FCC).TV-Y All children.TV-Y7 Suitable for children 7 and older.TV-G General audiences.TV-PG Parental guidance suggested.TV-14 Parental guidance strongly suggested.TV-MA Mature audiences only.U. S. TV ratings (content-based)FV Fantasy violence.V Violence.S Sexual situations.L Strong language.D Suggestive dialog.U.S. movie (MPAA) ratingsThese ratings are determined by the Motion Picture Association of America (MPAA).G General audiences.PG Parental guidance suggested.PG-13 Suitable for children 13 and older.R Parental guidance suggested for children under 17.NC-17 Not suitable for children under 17.X Adults only.Canadian English ratingsThese ratings are based on the Canadian Home Video Rating System, determined by the Canadian Motion Picture Distributors Association (CMPDA).C Suitable for all children.C8+ Suitable for children 8 and older.G General audiences.PG Parental guidance suggested.14+ Suitable for children 14 and older.18+ Adults only.Canadian French ratingsThese ratings are based on the classiﬁcation categories determined by La Régle du cinéma du Québec.G General audiences.8 ans+ Suitable for children 8 and older.13 ans+ Suitable for children 13 and older.16 ans+ Suitable for children 16 and older.18 ans+ Adults only.OSD Timeout 15sectOSD Timeout–Lets you set the OSD timeout. You can select the time from 5 sec to 60 sec, and the step is 5 sec.

16 TroubleshootingtCaption–Lets you set up closed captions. Choose from Analog Closed Caption, Digital Closed Caption, and Digital Caption Style.tAnalog Closed Caption–CC1, CC2, CC3, CC4, TEXT1, TEXT2, TEXT3, and TEXT4.tDigital Closed Caption–Service1, Service2, Service3, Service4, Service5, and Service6.tDigital Caption Style–There are two digital caption styles. One is the automatic function set by the broadcaster, and the other is the custom style where you can adjust the font size, color, opacity, background color, and so on.tReset Default–Resets the TV to its original factory settings.4Press MENU to return to the previous menu, or press EXIT to close the menu.TroubleshootingBefore calling for service, check the following information for possible solutions to problems you may experience. If none of these solutions work, turn oﬀ the TV, then turn it on again.Caution: Do not try to repair the TV yourself. Refer all servicing to qualiﬁed repair personnel.Video and audioRemote controlProblem SolutionNo picture (screen is not lit) and no sound.tMake sure that the power cord is plugged in.tPress POWER on the TV or the remote control.tMake sure that the correct video input source is selected. For more information, see “Selecting the video input source” on page 11.tTry another channel. The station may be experiencing problems.Dark, poor, or no picture (screen is lit), but sound is good.tAdjust the brightness. For more information, see “To adjust the picture:” on page 13.tMake sure that the correct picture mode is selected. For more information, see “To adjust the picture:” on page 13.tMake sure that the antenna or cable TV is connected correctly and securely. For more information, see “Connecting an antenna, cable TV, or satellite TV box” on page 9.No color, dark picture, or color is not correct.tAdjust the color saturation. For more information, see “Adjusting the picture” on page 13.Only snow (noise) appears on the screen.tTry another channel. The station may be experiencing problems.tMake sure that the antenna or cable TV is connected correctly and securely. For more information, see “Connecting an antenna, cable TV, or satellite TV box” on page 9.Dotted lines or stripes appear on the screen.tAdjust the antenna.tMove the TV away from noise sources such as cars, neon signs, or hair dryers.Double images. tTry using a highly directional outdoor antenna or cable TV.The picture has a few bright or dark spots.tA few bright or dark spots on an LCD screen is normal. It does not aﬀect the operation of this TV.Good picture, but no sound.tMake sure that the sound is not muted.tMake sure that the sound mode is set to Stereo or Mono. For more information, see “Selecting the audio mode” on page 14.Audio noise. tMake sure that there is no interference with infrared equipment such as a cordless telephone or headphones. Move the infrared equipment away from the TV to eliminate the noise.Problem SolutionRemote control does not work.tMake sure that the TV power cord is plugged in.tMake sure that there are no obstructions between the remote control and the remote control sensor on the front of the TV.tMake sure that the batteries are installed correctly. For more information, see “Installing remote control batteries” on page 6.tReplace the batteries. For more information, see “Installing remote control batteries” on page 6.Problem Solution

(1119 × 749.5 ×296Maintenance 17GeneralNote: If the problem is not solved by using these troubleshooting instructions, try turning oﬀ your TV, then turning it on again.MaintenanceJust like with any other household appliance, the performance and life-expectancy of your TV depends on how well you maintain it. Follow the procedures described here to clean the TV case and the LCD screen.Cautions:tMake sure that the TV is turned oﬀ and the power cord is disconnected from the power outlet before cleaning the TV.tNever spray or pour any liquid directly onto the screen or the case.CleaningtClean your TV with a soft, dry cloth. If surfaces are extremely dirty, use a soft cloth dampened with a small amount of non-ammonia, non-alcohol-based, non-abrasive detergent solution.tClean the screen with a clean, soft, lint-free cloth. If additional cleaning is necessary, apply a small amount of non-ammonia, non-alcohol-based, non-abrasive detergent solution to the cloth.SpeciﬁcationsSpeciﬁcations subject to change without notice.Weight and dimensions shown are approximate.Legal noticesFCC Part 15This device complies with Part 15 of the FCC Rules. Operation of this product is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.This equipment has been tested and found to comply within the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment oﬀ and on, the user is encouraged to try to correct the interference by one or more of the following measures:tReorient or relocate the receiving antenna.tIncrease the separation between the equipment and receiver.tConnect the equipment into an outlet on a circuit diﬀerent from that to which the receiver is connected.tConsult the dealer or an experienced technician for help.FCC warningChanges or modiﬁcations not expressly approved by the party responsible for compliance with the FCC Rules could void the user’s authority to operate this equipment.CablesConnections to this device must be made with shielded cables with metallic RF/EMI connector hoods to maintain compliance with FCC Rules and Regulations.Problem SolutionOne or more channels do not display.tMake sure that the channels are not blocked. For more information, see “Setting parental controls” on page 14.Password is lost. tEnter 0532 to access parental controls, then set a new password. For more information, see “Setting parental controls” on page 14.Some settings cannot be accessed.tIf a setting is grayed, the setting is not available in the current video input mode.TV cabinet creaks. tWhen the TV is in use, the temperature rises naturally and may cause the cabinet to expand or contract which can cause a creaking noise. This is not a malfunction.Control buttons on the TV do not work.tDisconnect the power cord, wait a few seconds, then reconnect the power cord and turn on the TV.TV type LCDTV panel 46-inch FHD LCDTV system NTSC-M, ATSCReceiving channels VHF: 2 - 13UHF: 14 - 69CATV: 1 - 125CADTV: 1-135DTV: 2-69Audio multiples BTSC systemAudio out 8W x 2Power requirement AC 120 V, 60 HzPower consumption 215WDimensions(W×H×D with stand)44.06 × 29.51 × 11.65inches mm)WeightInput terminals Composite video/L and R audio (1)Component video/L and R audio (1)HDMI (2)VGA and PC/DVI audio (1)ANT/Cable (1)Output terminals Digital Coaxial Audio (1)Headphone (1)Control terminals SERVICE PORT (1)46.30 lbs. (21 kg)

18 Legal notices

Navigation menu