Hisense Electric LCDD0016 Part15 Subpart B-LCD Monitor User Manual

Hisense Electric Co., Ltd. Part15 Subpart B-LCD Monitor

W9HLCDD0016_User Manual

ES-Innovation for lifeMODEL NO. LTDN42V77KMHHOSPITALITY LCD TELEVISION
iiImportant safety instructions 2233WarningsCautionsAccessoriesInstalling and removing the stand 33444Installing the standAttaching the TV to the deskRemoving the standInstalling a wall-mount bracketTV components 4455Front and side controlsBack connectionsRemote controlUsing the remote control 666Installing remote control batteriesAiming the remote controlMaking connections 7777788899Connecting the powerSelecting a locationConnecting an HDMI deviceConnecting a component video deviceConnecting an antenna,cable TV,or satellite TV boxConnecting a VCR, camcorder, or game consoleConnecting a computerConnecting a home theater systemConnecting headphonesUnderstanding the basics 9999910101012121212121414Selecting the video input sourceSelecting a channel Adjusting the volumeDisplaying program informationNavigating the menusOn-screen menu overview15151516161616Video and audioRemote controlGeneral Adjusting the picture Choosing the display format (aspect ratio)Adjusting the sound Adjusting the FeaturesSelecting the audio modeAdjusting the InstallationTroubleshootingMaintenanceCleaning Legal notices 17Adjusting hotel settings Connecting devices with USB interface 9
1As you enjoy your new product, keep these safety tips in mindThe issueThe home theater entertainment experience is a growing trend, and larger TVs are popular purchases. However, TVs are not always supported on the proper stands or installed according to the manufacturer’s recommendations. We and the consumer electronics industry are committed to making home entertainment enjoyable and safe.TVs that are inappropriately placed on dressers, bookcases, shelves, desks, speakers, chests, or carts may fall over and cause injury.Tune into safetyOne size of TV stand does not fit all. Use only a TV stand rated for the weight of your TV.Carefully read and understand all enclosed instructions for proper use of this product.Don’t let children climb on or play with entertainment system furniture and TVs.Don’t place TVs on furniture that can easily be used as steps, such as a crate or chest of drawers.Remember that children can become excited while watching a program, especially on a “larger-than-life” TV. Make sure that you place or install the TV where it cannot be pushed, pulled over, or knocked down.Make sure that you route all cords and cables so that they cannot be pulled or grabbed by curious children.Wall mountingIf you decide to wall mount your TV, always remember:One size of wall mount does not fit all. Use only a wall mount rated for the weight of your TV and that has been recommended by this TV manufacturer, listed in this manual, or otherwise listed by an independent laboratory as suitable for your TV.Follow all instructions supplied by the TV and wall mount manufacturers.If you have any doubts about your ability to safely wall mount your TV, get help from a professional installer.Make sure that the wall where you are mounting the TV is appropriate. Some wall mounts are not designed to be mounted to walls backed with steel studs or cinder blocks. If you are unsure, ask a professional installer.TVs can be heavy. At least two people are required for safe wall mount installation.fCHILD SAFETYIt makes a difference how and where you use your flat panel displayLTDN40V86MH
2Important safety instructionsImportant safety instructions1Read these instructions.2Keep these instructions.3Heed all warnings.4Follow all instructions.5Do not use this apparatus near water.6Clean only with a dry cloth.7Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.8Do not install near any heat sources such as radiators, heat produce heat.9Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the your outlet, consult an electrician for replacement of the obsolete outlet.10 Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.1112 Use only with a cart, stand, tripod, bracket, or the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13 Unplug this apparatus during lightning storms or when unused for long periods of time.14required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.15 The wall plug is the disconnecting device. The plug must remain readily operable.16 An apparatus with a three-prong, grounding-type plug is a Class I apparatus, which needs to be grounded to prevent possible electric shock. Make sure that you connect this Class I television to a grounding-type, three-prong outlet.17 Remote control batteries should not be exposed to excessive heat 18 The apparatus should not be exposed to dripping or splashing, on the apparatus.WarningsElectric shock hazardric shock, do not remove any cover or expose the device to rain or moisture. No user-serviceable parts are LightningFor added protection for your device receiver during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the power outlet and disconnect any antenna or cable system. This helps prevent property damage and personal injury from lightning and power line surges.Power linesAn outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.Handling the LCD panelYour TV’s screen is made of glass. Do not drop your TV or hit, jolt, or press hard against the LCD panel. If the screen breaks, be careful of broken glass. If the LCD panel is broken, make absolutely sure that you do not If the liquid gets in your mouth, immediately gargle, rinse, and consult with your doctor. Also, if the liquid gets in your eyes or touches your skin, consult with your doctor after rinsing for at least 15 minutes or longer in clean water. Replacement partsWhen replacement parts are required, make sure that the service have the same characteristics as the original part. Unauthorized hazards.Safety checkAfter completing any service or repair to this device, ask the service technician to perform routine safety checks to determine that your TV is in correct operating condition.Power sourceOperate your TV only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied to your home, consult an electrician or your local power company.CAUTIONRISK OF ELECTRIC SHOCKDO NOT OPENThis symbol indicates that dangerous voltage constituting a risk of electric shock is present within your TV. This label is located on the back of your TV.This symbol indicates that there are important operating and maintenance instructions in the literature accompanying your TV.S3125ALTDN40V86MH
Installing and removing the stand 3CautionsDamage requiring serviceUnplug this TV from the power outlservice personnel under the following conditions:When the power supply cord or plug is damaged or frayed.If liquid has been spilled or objects have fallen into your TV.If your TV has been exposed to rain or water.If your TV does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions because incorrect adjustment of other controls may result in damage and will often require extensive nician to restore your TV to its normal operation.If your TV has been dropped or damaged in any way.When your TV exhibits a distinct change in performance.Outdoor antenna groundingIf an outside antenna or cable system is connected to your TV, make sure that the antenna or cable system is grounded to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA No. 70, provides information with respect to correct grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of the antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.Note to CATV system installerArticle 820 of the National Electrical Code, ANSI/NFPA No. 40 provides it states that the cable ground must be connected to the grounding system of the building as close to the point of cable entry as practical. CondensationMoisture will form on the TV if the TV is brought from cool surroundings into a warm room or if the temperature of the room rises suddenly. When this happens, the TV's performance may be impaired. To prevent this, let the TV stand in its new surroundings for about an hour before switching it on, or make sure that the room temperature rises gradually. Condensation may also form during the summer if the TV is exposed to the breeze from an air conditioner. In such cases, change the location of the TV. Mobile telephone warningTo avoid interference with your TV picture and sound, operating problems, or even damage, keep your cordless and cellular telephones away from the TV.End of life directivessmall amount of mercury. Disposal of these materials may be regulated for environmental reasons. Your TV also contains material that can be recycled and reused. For disposal or recycling information, contact your local authorities or the Electronic Industries Alliance at www.eia.org to Non-active pixelsprovide exceptionally sharp video quality. Occasionally, a few of your TV, and are not considered defects.AccessoriesMake sure the following accessories are included in the box with your TV:Remote controlAC power cordAAA batteries (2)StandQuick Setup GuideInstalling and removing the standYou must install your TV into the stand in order for it to stand upright on or other vertical surface, you must remove the stand .Warning: Before attampting assembly or removal of the stand, unplug the AC power cord.Cautions:Read these instructions carefully before you try to assemble the stand or remove the stand .Make sure that you handle the TV carefully when attempting to assemble or remove the stand. If you are not sure of your ability to do this, contact a professional installer or service technician. Hisense is not responsible for any damages or injuries that occur because of mishandling or incorrect assembly.Use a soft cushion or covering to prevent scratching or damage to the TV screen or cabinet.Installing the standNoteTo install the stand:1Remove the stand from the box and place it on a table or bench.Antenna lead-in wireGrounding clampAntenna discharge unitGrounding conductorsGround clampsPower service grounding electrode systemElectric service equipment21345671234567LTDN40V86MH
4TV components2Lay the TV (screen down) on the edge of the table or bench. Make sure that you put a soft cloth or cushion between the table or bench and the TV.3Align the base with the TV, then secure the stand to the TV with the 4 screws provided.4Carefully lift the TV into an upright position.The TV must be attached to desk so it cannot be pulled in a forward/backward direction,potentially causing injury ordamaging the product.(pedestal) may result in the TV falling over.Removing the standAttaching the TV to a deskYou must remove the stand before you can wall-mount the TV.NoteTo remove the stand:1Lay the TV (screen down) on the edge of the table or bench. Make sure that you put a soft cloth or cushion between the table or bench and the TV.2Remove the 4 screws holding the stand to the TV, then remove the stand.Installing a wall-mount bracketIf you want to attach the TV to a wall-mount bracket (not provided), you Warningonly. To reduce the risk of hazards, do not perform any servicing other than that contained in the operating instructions unless you are To install a wall-mount bracket:1Lay your TV face down on a table or bench. Make sure that you put down a soft cushion or cloth so that your TV is not scratched.2Remove the pedestal stand. See “Removing the stand” above.3Secure the wall-mount bracket to the back of your TV using the four screws provided with the bracket.TV componentsFront and side controlsScrews:M5×L(table depth + 8~10mm)Example:Table depth = 15mm Screws:M5×25LTDN40V86MHItem Name DescriptionPower indicator The light shows whether the TV is on or standby mode.Remote control sensorReceives signals from the remote control. Please do not block. MENU Display the onscreen display(OSD) or Exit to close the OSD.INPUT Select the INPUT menu. VOL / VOL Volume adjusting bottom,to increase or decrease the volume. Channel selection bottom,to increase or decrease the channel. CH (power) (standby mode).5671234NOTE:Be sure to follow the instructions,in correct installation of the stand14.3inch(363.6mm)4-ScrewsDesk7.24inch(184mm)1243756/CH
TV components 5Remote controlBack connectionsItem Name DescriptionUSBHDMI 1/2/3 Connect an HDMI device to one of these jacks. PC AUDIO jacksVGA jackConnect a computer (audio and video) to these jacks. Plug headphones into this jack.COMP1COMP2Connect component video devices to these jacks. AUDIO OUTjackAV Connect a standard AV device, such as a camcorder or game console, to these jacks. jackANT IN Connect an antenna or cable TV to this jack.DIGITAL AUDIO OUT jackConnect a digital coaxial cable to this connector, then to a digital sound system. 12345678910(headphone) jackItem Name DescriptionPOWERPress to turn on the TV or put the TV in standby mode.Caution: The TV continues to receive power even in standby mode. Unplug the power cord to disconnect power.INPUTENTER7 8 0 EN-31205ASPECTGUIDEINFOMENUCHVOLDMPCCDMTS/SAPSLEEPSOUNDEXITTV1 23 5 6 4 7 8 9 0 LASTPICTUREMUTE12VOL / VOL Press to increase or decrease the volume.CCDSOUNDmore information.Press to select the sound mode. You can selectStandard, Custom, Vivid, Game, Cinema and standard , custon , music and clear voice.MTS/SAPIn analog TV mode, press to select STEREO, SAP (secondary audio language), or MONO.In digital TV mode (DTV), press to select the audio track. For more information.PICTUREPress to select the video mode. You can select Power Saver.3456 LTDN40V86MH11RJ12Connect a RJ-12 Cable to this jack, then to an external control device(such as a computer or A/V control system), to control theTV functions externally.SERVICE264798 310HDMI2COMP 2HEADPHONEAUDIO OUTVIDEO L RLRAVDIGITALAUDIO OUTYPBPRLRHDMI1564111HDMI3COMP1PC AUDIORJ12PCSERVICEANT INUSBVGAConnect a audio cable to this connector.Thise unit has USB interface and can be connected the stand avd USB 1.1 and USB 2.0 USB FLASH STICK.Service only, don't use.
6Using the remote controlUsing the remote controlInstalling remote control batteriesTo install remote control batteries:1Press down on the battery compartment cover lock, then remove the remote control cover.2Insert two AAA batteries into the battery compartment. Make sure that the + and – symbols on the batteries match the + and – symbols in the battery compartment.3Replace the cover. Make sure that the lock snaps into place.4 Install screw.Battery precautions: Dispose of batteries as hazardous waste.Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries and can cause old batteries to leak.Remove batteries as soon as they become inoperable. Chemicals that can leak from the batteries can cause a rash. If the batteries leak, clean the battery compartment with a cloth.If the remote control is not used for an extended period of time, remove the batteries.Do not expose batteries to excessivother heat sources.MENU Display the main menu.Press or to move up or down in on-screen menus.Press or to move left or right in on-screen menus or to adjust menu settings.ENTER or to open sub-menus.Numbersdash)Press the number buttons to enter channel numbers or the parental control password.Press to select a digital sub-channel.Program guide (EPG) function buttonsAfter pressing the GUIDE button in the digital TV channel option, the same color buttons will appear with explanations in the on-screen display (OSD). Follow the steps shown in the OSD.TV Press to select the TV as the video input source. Select screen mode.INPUT Press to open the INPUT SOURCE menu, then press or to select the video input source you want. ASPECTGUIDECH / CH Press to go to the next or previous channel in the channel list. Item Name Description7891011121314151617181920INFO Display the current channel number.MUTEDMPPress to mute the sound. Press again to restore Press to browse Music and Phone on USB stick plugged into TV.the sound.EXIT Press to close the on-screen menu.LAST Return to previous channel.SLEEP Press to set the sleep timer. Press to open the DTV program guide(if available). 212223Aiming the remote controlTo aim the remote control:Point the remote control towards the remote sensor on the front of your TV.Notes:Do not expose the remote control to shock or liquids.Do not use the remote control in an area with high humidity.Do not place the remote control in direct sunlight.Do not place objects, such as furniture, between the remote control and the remote sensor.The remote control may not work if direct sunlight or bright light shines on the remote sensor. Either move your TV or change the angle at which you use the remote control.INPUTENTER7 8 0 EN-31205ASPECTGUIDEINFOMENUCHVOLDMPCCDMTS/SAPSLEEPSOUNDEXITTV1 23 5 6 4 7 8 9 0 LASTPICTUREMUTELTDN40V86MHWhen you are listening to music and enjoy pictures.You can switch between playing and pause through this button.Exit the current state.Go back to preview menu.
7Making connectionsMake sure that you only use the type of power source indicated on the marking label.Always unplug the power cord when not using the TV for a long period of time.Selecting a locationYou should select a location for the TV:Where direct light does That has indirect and soft lightingWhere the TV has access to an antenna or cable TV connectionWhere the TV has access to a power outletNote:may cause eye strain.Connecting an HDMI deviceNote: If your device has an HDMI connection, we recommend you use it to get the best picture and sound quality possible.To connect an HDMI device:Connect one end of an HDMI cable (not included) to the HDMI 1 or HDMI 2 jack on Or HDMI3 on the side of your TV.then connect the other end of the cable to the HDMI OUT jack on Note: To connect a DVI device, use a DVI to HDMI adapter cable to connect to the HDMI jack on the TV, then connect an audio cable to the PC AUDIO jack on the back of the TV.To play from the HDMI device:1Turn on the TV, then press INPUT. The INPUT SOURCE menu opens.2Press or to select HDMI1,HDMI2,HDMI3, then press ENTER.3Turn on the HDMI device, then set it to the correct mode. Refer to the instructions that came with the HDMI device.Connecting a component video deviceComponent cables often have red, green, and blue color-coded video connectors and red and white audio connectors. Match the colors when making connections.To connect a component video device:1Make sure that your TV’s power cord is unplugged and the 2Connect a component video cable to the COMPONENT OUT jacks on the component video device.3Connect the other end of the component video cable to the COMPONENT jacks on the back/side of your TV.4Connect an audio cable to the AUDIO OUT jacks (L/R) on the component device.5Connect the other end of the audio cable to the COMPONENT AUDIO-R and AUDIO-L jacks on the back/side of your TV.Y BRL RComponent video deviceComponent video cableAudio cableMaking connectionsBefore you make any connections:Check the plugs on the ends of cables to make sure that they are the correct type before you try plugging them into jacks on the TV.Make sure that all plugs are securely inserted into the jacks. Loose connections can result in image or color problems.When connecting devices to the TV, make sure that the TV and unplugged.Connecting the powerTo connect the power cord:Connect the power cable to the AC IN jack on the back of the TV, then connect the other end to a power outlet.Notes:HDMI deviceHDMI cableLTDN40V86MHHDMI2COMP 2HEADPHONEAUDIO OUTVIDEO L RLRAVDIGITALAUDIO OUTYPBPRLRHDMI1SERVICEANT INHDMI3COMP1PC AUDIORJ12PCUSBVGAthe HDMI device.POWER CORD INLET POWER CORD
HDMI3COMP1PC AUDIORJ12PCUSBVGAHDMI2COMP 2HEADPHONEAUDIO OUTVIDEO L RLRAVDIGITALAUDIO OUTYPBPRLRHDMI1SERVICEANT INHDMI2COMP 2HEADPHONEAUDIO OUTVIDEO L RLRAVDIGITALAUDIO OUTYPBPRLRHDMI1SERVICEANT INMaking connections8To connect an antenna, cable TV, or satellite TV box:Connect one end of a 75-Ohm, coaxial cable to the jack ANT IN on the back of the TV, then connect the other end of the cable to the antenna or cable TV wall jack.Notes:We recommend using a 75-Ohm, coaxial cable to reduce interference and noise that may be caused by radio wave transmissions.Do not bundle the coaxial cable with the power cord or any other cables.If you are using an antenna and reception is not good, contact a service technician to adjust the antenna.Connecting a VCR, camcorder, or game consoleNote: If the VCR, camcorder, or game console has component jacks (better), or an HDMI jack (best), connect them using the best available connection.To connect a VCR, camcorder, or game console:1Make sure that your TV’s power cord is unplugged and the VCR, 2Connect one end of a standard AV cable (not included) into the AV video jack on the back of the TV, then connect the other end of the cable to the AV OUT VIDEO jack on the external device.3Connect the audio connectors of the AV cable (the red and white connectors) to the AV OUT AUDIO jacks of the external device, then connect them to the AV L and R jacks on the back of your TV.To play the external AV device:1Turn on the TV, then press INPUT. The INPUT SOURCE menu opens.2Press or to select Video, then press ENTER.3Turn on the device, then start playback on the device.Connecting a computerTo connect a computer:1Make sure that your TV’s power cord is unplugged and the 2Connect one end of a VGA cable (not included) to the VGA jack on the side of the TV, then connect the other end of the cable to the 3Connect one end of an audio cable with a stereo mini-plug (not included) to the PC AUDIO jack on the side of the TV, then connect the other end of the cable to the AUDIO OUT jack on the computer.To play video from the computer:1Turn on the TV, then press INPUT. The INPUT SOURCE menu opens.2Press or to select PC, then press ENTER.3Turn on the computer, then adjust the computer display properties as needed.ANT IN jack on the side of the TVAntenna, cable TV, or satellite boxHome antenna terminal(75 ohm)To play from the component video device:1Turn on the TV, then press INPUT. The INPUT SOURCE menu opens.2Press or to select Component1 or Component2, then press ENTER.3Turn on the component video device and start playback. Refer to the instructions that came with the component video device.Connecting an antenna, cable TV, or satellite TV boxIf you are connecting a satellite TV or cable box, you can use one of the following (if available):Best - HDMI cableBetter - Video component cablesGood - Video composite cableAcceptable - 75-ohm coaxial cable.VCR, camcorder, or game consoleAV cableNote: Cables are often color-coded to connectors. Connect yellow to yellow, red to red, and white to white.75-Ohm coaxial cableVGA cable Audio cableComputerLTDN40V86MH VGA jack on the computer.
9Connecting a home theater systemConnecting using a digital audio cableTo connect using a digital coaxial cable:1Make sure that your TV’s power cord is unplugged and the home 2Connect one end of a digital coaxial audio cable (not included) to the DIGITAL AUDIO OUT jack on the back of the TV.3Connect the other end of the audio cable to the digital coaxial input jack on the home theater system.To play TV sound through a home theater system:1Turn on the TV and select a program to watch.2Turn on the home theater system and select the TV sound source, then adjust the volume to a comfortable level.Connecting headphonesWarning: When using headphones, adjust the headphone volume to avoid excessively loud volume which can damage your hearing.To connect headphones:Plug the headphones (not included) into the (headphone) jack on the back of the TV.Note: The TV sound automatically mutes when headphones are connected.DIGITAL AUDIO OUT Home theater systemDigital coaxial cableUnderstanding the basics1Plug the power cord into an AC power outlet.2Press (power). Your TV turns on.3goes into standby mode.Warning: When your TV is in standby mode, it is still receiving power. To completely disconnect power, unplug the power cord.Note: If your TV does not receive an input signal for several minutes, it automatically goes into standby mode.Understanding the basicsSelecting the video input sourceTo select the video input source:1Turn on your TV, then press INPUT on the remote control or on the TV. The INPUT SOURCE menu opens.2Press or to highlight the video source you want, then press ENTER. Options include TV,Video,Component1,Component2, Selecting a channelTip: If you are using a cable or satellite box, use the remote control that came with that device to change channels. To select a channel:Press CH /CH to go to the next or previous channel.Press the number buttons to enter the channel number you want, then wait for the channel to change, or press ENTER to change the channel immediately.To select a digital channel, press the number buttons to select the main digital channel, then press the dash(-). button, then the number buttons again to select the sub-channel. Wait for the channel to change or press ENTER to change the channel.Note: Button presses must be within three seconds of each other.Press LAST to go to the last channel viewed.Press GUIDE to display a list of memorized channels, press or to select the channel you want from the list, then press ENTER to go to that channel.Note: If the list has more than one page, press or to scroll through the pages.Adjusting the volumeTo adjust the volume:Press VOL /VOL to increase or decrease the volume.Press MUTE MUTE again to restore the sound.LTDN40V86MHHDMI2COMP 2HEADPHONEAUDIO OUTVIDEO L RLRAVDIGITALAUDIO OUTYPBPRLRHDMI1SERVICEANT INConnecting devices with USB interface Plug the USB stick into USB port on the side of TV.1. The USB detect message will pop out when you plug in USB stick into TV. Select "OK" to review content on USB.2. Or you can press INPUT button on the remote control or on the TV and select DMP in source list.HDMI3COMP1PC AUDIORJ12PCUSBVGAPC(computer),HDMI1,HDMI2,HDMI3,DMP.
10 Understanding the basicsNavigating the menusOn-screen menu overviewyour TV. To access the menu, press MENU. The menus and their corresponding functions are described in the following table:PictureBrightness Lets you adjust the level of brightness on the screen. Increasing brightness can add more light to dark areas of the picture.Contrast Lets you adjust the level of picture contrast. Increasing the contrast adds more light to the white areas of the picture.Saturation Lets you adjust the level of color intensity.Sharpness Lets you adjust the focus of the picture. Increase sharpness for a clearer picture, or decrease sharpness for a smoother picture.Backlight Lets you control panel overall brightness and background.Color TemperatureLets you select one of three preset color temperature settings: Cool, Normalor Warm.ENTERMENUEXITENTERENTERPress to display the Main menu.Press to select menus, to adjust selected items, or move on-screen cursor left or right.Press to select the menu items.sub-menu.Press to close the menu. Displaying program informationTo display program information:Press INFO to show an information banner. The information banner shows current program information such as channel number, video input source, and resolution.Digital signal information—Displays channel number, station name, channel label (if preset), broadcast program name, signal type, audio information, resolution,and current program start and end times when watching a digital Analog signal information—Displays channel number, channel label (if preset), signal type, audio information, and resolution when watching an analog channel.Press GUIDE to show the digital program guide, which may show a list of available programs, program times, and program summaries, depending on the in formation provided by the broadcaster.channel.Preset Modeconditions.12SoundSound mode2Balance Lets you adjust the balance between the left and right speakers.3LTDN40V86MHPicture TV.......Picture mode StandardContrastBrightneBacklightSaturationHueSharpnessColor temperature Normal505055005Move: Enter: OK Exit: EXITHueSound TVSound mode StandardEqualizer >>>BalanceDigital audio language 0Move: Enter: OK Exit: EXITFeatures TVCaption settings >>>Sleep time 0Power on >>>Power off >>>V-Chip >>>Transpaerncy 0OSD Timeout >>>Move: Enter: OK Exit: EXITEqualizerFeaturesCaption settings3Power onSleep timeAdjusts the color balance of the picture.Use this control to make skin tone look more natural. Lets you select one of preset sound mode or Lets you select the audio frequency you want toadjust and change its value.programs.closedLets you select sleep timer among 0 to 180 Lets you set the TV on time of every day.EnglishDigital audiolanguageLets you select the language track you prefer for viewing digital TV programs. Available options depend on your digital TV provider.minutes.
11Understanding the basicsInstallation44PC55TimeSource LabelsReset AVsettingsAutoadjustmentClockPhaseHorizontal shiftVertical shiftStandby time LanguageLTDN40V86MHFeatures3OSD TimeoutInstallation TVLanguage EnglishChannels >>>Time >>>Source Labels >>>Reset AV settings Start nowMove: Enter: OK Exit: EXITChannelsPC PCAuto adjustment Start nowClockPhaseHorizontal shiftVertical shiftStandby time01530150Move: Enter: OK Exit: EXITDMP DMPSlide time LongTransitions NoneRotate 0Zoom 1XMove: Enter: OK Exit: EXITDMP6Slide timeTransitionsRotateZoom6Lets you adjust Menu transparency.Lets you select the lanugage for the On-ScreenDisplay. Choose from English, French, or Spanish.settings and daylight saving.Adjust the clock used to synchronizing the image.Set display time of Menu.Lets you select certain programs to be blocked.Lets you zoom in/out picture.Lets you select RF signal source for your TV. And lets you initiate an automatic channel scan to search the available channels on your TV.Lets you name each input.Change setting back to default. (picture andsound only)Adjust the position of image on screen automatically.Adjust the phase of the clock used for synchronizing the image.Adjust the horizontal position of the image. Adjust the input.vertical position of the image. Lets you rotate picture.V-ChipLets you select the photo slide time: Long, Medium or Shot.Signal modeDMP Function IntroductionPctureMusicsupport formatJPEGMP3Transparency,Lets you select photo transitions way from current picture to next picture.
12Adjusting the pictureTo adjust the picture:1Press MENU. The Main menu opens.2Press ENTER or . The Picture menu opens.3Press or to highlight an option, then press or to accessthe option, and press or to adjust the option. You can select:Picture Mode—Selects the picture mode. You can select: Vivid (a bright and vivid picture) Standard (a standard picture): You can also press PICTURE on the remote control to select the Backlight –Lets you control panel overall brightness. Increasing the backlight can add more light to overall screen picture and the TV uses more power consumption. While decreasing the backlight can add more darkness to overall screen picture and the TV uses less power consumption. Saturation– Lets you adjust the intensity of the colors.Sharpness–Lets you increase the sharpness level for clearer images or decrease the sharpness level for smoother images.Color temperature –Lets you change the color temperature. You can select the color temperature from three options: Cool, Normal or Warm.4Press EXIT to return to the previous menu, or press ʉ to close the menu.Choosing the display format (aspect ratio)To choose the display format:1Press ASPECT on the remote control repeatedly to cycle through the available display formats. Options include:Normal —Selects the 4:3 aspect ratio to show a picture with black bar on both right and left hand side.Zoom1 —Enlarges the picture but may crop the top and bottom of picture. And has less black bar on right and left Full Screen—Shows a full-screen picture.Panorama —Stretches the picture at the edges, butmaintains a good aspect ratio at the center of the screen.Adjusting the soundTo adjust the sound:1Press MENU. The Main menu opens.2Press or to highlight sound, then press ENTER or . The sound menu opens.3Equalizer—4Press to return to the previous menu, or press ʉ to close the menu. Selecting the audio modeTo select the audio mode:Press SOUND on the remote control one or more times to cycle through the available sound modes. Options include: StandarderutciPerutciP picture mode.–Lets you increase or decrease the contrast of the picture. Increase the contrast to adjust the white areas of the picture or decrease the contrast to adjust the black areas of the picture.Contrast–Lets you increase or decrease the brightness of the picture. Increasing the brightness can add more light to dark areas of the picture, while decreasing the brightness can add more darkness to light areas of the picture.BrightnessNoteENTERPress or to highlight an option, then press or to accessthe option, and press or to adjust the option. You can select:ENTERBalance——Adjusts the balance between the left and right audio channels.than Normal aspect mode.Note: In analog TV mode, allows you to select all aspect modes.In digital TV mode, allows you to select Normal mode and full- screen mode. Zoom and panorama modes are not available. (for normal programs).Music (for music programs).Clear Voice (for news or sports programs).Custom (for a customized sound mode).Adjusting picture and soundLTDN40V86MHPicture TV.......Picture mode StandardContrastBrightnessBacklightSaturationHueSharpnessColor temperature Normal505055005Move: Enter: OK Exit: EXITGame(a finely detailed picture) Cinema(the brightness is decreaced) Power saver(decrease the backlight for to save energy) Hue – Lets you adjust the overall color of the picture (only supported in TV/AV mode).Sound TVSound mode StandardEnglishEqualizer >>>BalanceDigital audio language0Move: Enter: OK Exit: EXIT — Press [ / ] to select between 3 different pre-adjusted sound modes:Standard,music,and Clear voice. The User mode preserves your preferred sound settings after using the Equalizer available under the Sound submenu. Sound modeSet the users' mode of sound, press [ / ] button to select the sound component of 120HZ, 500HZ, 1.5K, 5K, and 10K. Press [▲/▼] button to weaken or enlarge the sound to the proper value.In TV mode, you can adjust:In TV mode, you can adjust:Zoom2 —Enlarges the picture but may crop the top and bottom of picture. And no black bar on right and left. Digital audio language In digital TV mode,allows you to select the audio language for a program. In analog TV mode,you can't see this optionAdjusting the Features1Press MENU. The Main menu opens.2Press or to highlight Features, then press ENTER or . The Features menu opensIn TV mode, you can adjust:EXIT
133Press or to highlight an option, then press or to accessthe option, and press or to adjust the option. You can select:ENTERCaption settings – Lets you set up closed captions (CC). Settings include Closed captions On/Off, Analog caption service, Digital caption service and Digital caption options.Closed captions - Lets you select On, Off or On during mute. Analog caption service - Lets you select one CC server among CC-1,CC-2,CC-3,CC-4,T-1,T-2,T-3 and T-4. Digital caption service: Lets you select one cc server among CS-1,CS-2,CS-3,CS-4,CS-5 and CS-6.Digital caption options: Lets you adjust the CCfont, color, background etc or you can keep default set by the broadcaster. Changing channel settings LTDN40V86MHFeatures TVCaption settings >>>Sleep time 0Power on >>>Power off >>>V-Chip >>>Change PIN >>>Transpaerncy 0OSD Timeout >>>Move: Enter: OK Exit: EXITSleep time –Lets you select auto sleep time among 0 to 180 minutes.Power on – Lets you set up auto turn TV on time.Power off –Lets you set up auto turn TV off time.V-Chip – Lets you prevent your children from watching inappropriate material on TV. When set, parental controls read the rating of the program and deny access to programs that exceed the ratings level you select. To watch programs that exceed the selected rating, you must enter a password.Hotel Function Lock TVMove: Enter: OK Exit: EXIT OffSearch Lock OffUser Save Lock OffPicture Lock OffAudio Lock OffFeatures Lock OffInstallation Lock OffDMP Lock Off.......Function V-Chip TVMove: Enter: OK Exit: EXITUS TV Parental Guid... >>>US MPAA Rating SelectCanadian English Rating SelectCanadian French Rating Select.......Press the number buttons to enter the four-digit password. The default password is 0532. The V-Chip menu opens.Access to V-Chip MenuProgram Block– A–Rating Enable is on.B–U.S. TV Ratings: You can choose TV ratings according to the illustration on the screen.C–The settings for U.S. Movie Ratings, Canada (English) Ratings, and Canada (French) Ratings follow Step B. If you want to block an unrated program, turn on this function. You can select all the ratings listed in the charts below.Press or to highlight an option, then press or to accessthe option. Press or to highlight a rating and press to ENTERENTERlockand all other lower ratings. the rating and all other higher ratings or unlock the rating and U.S. TV ratings (age-based)These ratings are determined by the Federal Communications Commission (FCC).TV-Y All children.TV-Y7 Suitable for children 7 and older.TV-G General audiences.TV-PG Parental guidance suggested.TV-14 Parental guidance strongly suggested.TV-MA Mature audiences only.U. S. TV ratings (content-based)FV Fantasy violence.V Violence.S Sexual situations.L Strong language.D Suggestive dialog.U.S. movie (MPAA) ratingsThese ratings are determined by the Motion Picture Association of America (MPAA).G General audiences.PG Parental guidance suggested.PG-13 Suitable for children 13 and older.R Parental guidance suggested for children under 17.NC-17 Not suitable for children under 17.X Adults only.Canadian French ratingsdetermined by La Régle du cinéma du Québec.G General audiences.8 ans+ Suitable for children 8 and older.13 ans+ Suitable for children 13 and older.16 ans+ Suitable for children 16 and older.18 ans+ Adults only.Canadian English ratingsThese ratings are based on the Canadian Home Video Rating System, determined by the Canadian Motion Picture Distributors Association (CMPDA).C Suitable for all children.C8+ Suitable for children 8 and older.G General audiences.PG Parental guidance suggested.14+ Suitable for children 14 and older.18+ Adults only.The V-Chip can block non rated programs as per "CEA-608-Note:E sec. L.3". If the option to block [None], [NR], [E]or [E] programs is used in[U.S,TV ratings ]kk, [U.S.movie(MPAA) ratings]kk, [Canada English ratings]kk or [Canada French ratings ]kk accordingly “unusualresultsmay occur, and the unit may not receive emergency bulletins or other types of programming:” · Emergency Bulletins (Such as EAS messages, weather warnings and others) · Locally originated programming · News · Political · Public Service Announcements · Religious · Sports · Weather.
Adjusting the InstallationTo change the channel settings:1Press MENU. The Main menu opens.2Press or to highlight Installation, then press ENTERinstallation menu opens.3 or . The Press or to highlight an option, then press or to accessthe option, and press or to adjust the option. You can select:ENTERLanguage –You can select the menu's language among English, French and Spanish.Installation TVLanguage EnglishChannels >>>Time >>>Source Labels >>>Reset AV settings Start nowMove: Enter: OK Exit: EXITChannels –You can select the mode of RF input and scan the available channels.Time– Lets you set the exact time. You can setupdate,time,time zone and daylight saving.Source Labels–Lets you name input source.Reset AV settings –Change setting back to default. (picture and sound only)In TV mode, you can adjust:Installation Channels TVMove: Enter: OK Exit: EXIT.......Autoprogram Start nowInstallation mode Antenna14Changing channel settingsLTDN40V86MHChange PIN–Change the password of the V-Chip function.Transpaerncy–Adjust the transparency of menu.OSD Timeout –The time it takes the OSD to disappear whenno operations are performed. You can change it from Off, 5seconds, 10seconds, and 30seconds.Note: Menu items that are not selectable are grayed out. Menus in this manual are described in TV mode, unless otherwise indicated.
15Remote controlGeneralNote: If the problem is not solved by using these troubleshooting The picture has a few bright or dark spots.A few bright or dark spots on an LCD screen is normal. It does not Good picture, but no sound.Make sure that the sound is not muted.Make sure that the sound mode is set to Stereo or Mono. For more information, see “Selecting the audio mode” on page 12.Audio noise. Make sure that there is no interference with infrared equipment such as a cordless telephone or headphones. Move the infrared equipment away from the TV to eliminate the noise.Problem SolutionRemote control does not work.Make sure that the TV power cord is plugged in.Make sure that there are no obstructions between the remote control and the remote control sensor on the front of the TV.Make sure that the batteries are installed correctly. For more information, see “Installing remote control batteries” on page 6.Replace the batteries. For more information, see “Installing remote control batteries” on page 6.Trouble programming your existing universal remote control.See instructions and a table of common codes in “Programming a universal remote control to work with your TV” on page 7.Codes are subject to change. For up to date codes, go to www.dynexproducts.com.Replace the batteries. For more information, see “Installing remote control batteries” on page 6.Refer to the User Guide that accompanied your universal remote control and contact the manufacturer if problems persist.Problem SolutionProblem SolutionOne or more channels do not display.Make sure that the channels are not blocked. For more information, see “Setting parental controls” on page 13.Password is lost. Enter 0532 to access parental controls, then set a new password. For more information, see “Setting parental controls” on page 13.Some settings cannot be accessed.If a setting is grayed, the setting is not available in the current video input mode.TV cabinet creaks. When the TV is in use, the temperature rises naturally and may cause the cabinet to expand or contract which can cause a creaking noise. This is not a malfunction.Control buttons on the TV do not work.Disconnect the power cord, wait a few seconds, then reconnect the power cord and turn on the TV.TroubleshootingBefore calling for service, check the following information for possible solutions to problems you may experience. If none of these solutions Caution: Do not try to repair the TV yourself. Refer all servicing to Video and audioProblem SolutionNo picture (screen is not lit) and no sound.Make sure that the power cord is plugged in.Press POWER on the TV or the remote control.Make sure that the correct video input source is selected. For more information, see “Selecting the video input source” on page 9.Try another channel. The station may be experiencing problems.Dark, poor, or no picture (screen is lit), but sound is good.Adjust the brightness. For more information, see “To adjust the picture:” on page 12.Make sure that the correct picture mode is selected. For more information, see “To adjust the picture:” on page 12.Make sure that the antenna or cable TV is connected correctly and securely. For more information, see “Connecting an antenna, cable TV, or satellite TV box” on page 8.No color, dark picture, or color is not correct.Adjust the color saturation. For more information, see “Adjusting the picture” on page 12.Only snow (noise) appears on the screen.Try another channel. The station may be experiencing problems.Make sure that the antenna or cable TV is connected correctly and securely. For more information, see “Connecting an antenna, cable TV, or satellite TV box” on page 8.Dotted lines or stripes appear on the screen.Adjust the antenna.Move the TV away from noise sources such as cars, neon signs, or hair dryers.Double images. Try using a highly directional outdoor antenna or cable TV.Troubleshooting LTDN40V86MH
16Weight and dimensions shown are approximate.Legal noticesFCC Part 15This device complies with Part 15 of the FCC Rules. Operation of this product is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.This equipment has been tested and found to comply within the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television on, the user is encouraged to try to correct the interference by one or more of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.that to which the receiver is connected.Consult the dealer or an experienced technician for help.FCC warningresponsible for compliance with the FCC Rules could void the user’s authority to operate this equipment.CablesConnections to this device must be made with shielded cables with metallic RF/EMI connector hoods to maintain compliance with FCC Rules and Regulations.Canada ICES-003 statementThis Class B digital apparatus complies with Canadian ICES-003.Cet appareil numerique de la classe B est conforme a la norme NMB-003 du Canada.Standard Television Receiving Apparatus — Appareil de réception télévision ordinaire, Canada BETS-7 / NTMR-7HDMItrademarks or registered trademarks of HDMI Licensing LCC.TV type LCDTV panel 42-inch TFT LCDTV system NTSC-M, ATSCReceiving channels VHF: 2 - 13UHF: 14 - 69CATV: 1 - 125CADTV: 1-135DTV: 2-69Audio multiples BTSC systemAudio out 7 W x 2Power requirement AC 120 V, 60 HzPower consumption 180 W (With Max backlight)Dimensions(W × H × D with stand) 40.2 × 27.6 × 12 inches (1020× 700× 302.9 mm )Weight 39.69 lbs. (18 kg)Input terminals Composite video/L and R audio (1)Component video/L and R audio (2)HDMI (3)VGA/audio (1)ANT/Cable In (1) Output terminals Digital Coaxial Audio (1)Headphone (1)Control terminals SERVICE PORT (2)MaintenanceJust like with any other household appliance, the performance and life-expectancy of your TV depends on how well you maintain it. Follow the procedures described here to clean the TV case and the LCD screen.Cautions:disconnected from the power outlet before cleaning the TV.Never spray or pour any liquid directly onto the screen or the case.CleaningClean your TV with a soft, dry cloth. If surfaces are extremely dirty, use a soft cloth dampened with a small amount of non-ammonia, non-alcohol-based, non-abrasive detergent solution.Clean the screen with a clean, soft, lint-free cloth. If additional cleaning is necessary, apply a small amount of non-ammonia, non-alcohol-based, non-abrasive detergent solution to the cloth.Specifications, Legal noticesLTDN40V86MHUSB(1)Component InputVideo Input480I/60HzNTSC-M 480P/60Hz720P/60Hz 1080I/60Hz1080P/60HzPC Input VGA (640 × 480 60Hz )SVGA (800 × 600 60Hz)SGA (1024 × 768 60Hz)HDMI Input RGB/60Hz )867× 4201 006× 008 084× 046( YUV/60Hz (480I 480P 720P 1080I 1080P)Wall Mounting VESA Size Wall-mount screws pattern 400 X 200 (mm)M6X25 (4 pc)
17Adjusting hotel settingsTo adjust hotel settings:1Press MENU. The Main menu opens.2Press or to highlight SOUND, then press ENTER or , audio3HOTEL MODE —Allows installer to active or disable hotel options. TV ON SETTING —Allows installer to set up of initial options eachPress or to highlight an option, then press or to accessthe option, press or to select a value and press to adjustthe option. You can select:ENTER menu opens. Press or to highlight balance, use or to adjust to zero, then press the number buttons to enter the three- digit password 5 4 8. The Hotel Settings Menu opens.Note: Please redo above step if fail when opening Hotel Settings Menu.ENTER: Hotel options are active. On: Hotel options are disabled. time a guest turns TV on.On VolumeIn ON mode, can be adjusted from 0 to 100.ON VOLUME VALUEOn SourceInput options. Choises include will remember previous input source.LASTTV,Video,Component1,on source will activate selection andTV ON CHANNEL ON CHANNEL NUMBER.—Allows installer to set up desiredOn Channel Numberchannel when TV is turned on. If no desired channel is requestedON CHANNEL—Allows installer to select one of three options.Power OnChoices are andLAST, ON Standby.: TV will return to whatere operation it was in before powerLAST out.ON : TV will turn on when power is restored.Standby : TV will be activated but not turned on.—Allows installer to active or disable basic settings.Basic SettingON : TV picture defaults to Normal viewing mode, Normal Audio OFF : Installer can go to and adjust settings.and Zoom Aspect is full screen.User Save LockFUNCTION Lock —Allows installer to lock the following functions.—Locks key pad.kB lockOFF: Usable.ON : Locked down (disabled).—Locks key pad.Search Lock OFF: Usable.ON : Locked down (disabled).—Locks hotel guest adjustment.User Save Lock OFF: Menu features can be adjusted by hotel guest and be ONremembered in TV memory.factory default settings.LTDN40V86MHHotel SettingsSound TV0Move: Enter: OK Exit: EXITSound mode StandardEqualizer >>>BalanceBalance 0Hotel TV On Setting TVMove: Enter: OK Exit: EXITOn Volume OffOn Source LastLogo HISENSEPower On StandbyBasic Seetting Off.......Hotel Function Lock TVMove: Enter: OK Exit: EXIT OffSearch Lock OffUser Save Lock OffPicture Lock OffAudio Lock OffFeatures Lock OffInstallation Lock OffDMP Lock Off.......Hotel Function Lock TVMove: Enter: OK Exit: EXITKB Lock OffSearch Lock OffUser Save Lock OffPicture Lock OffAudio Lock OffFeatures Lock OffInstallation Lock OffDMP Lock Off.......—Locks Picture adjustments in menu.Picture LockOFF: Picture adjustments in menu are allowed by user.ON : Locks all picture adjustments.—Locks Audio adjustments in menu.Audio LockOFF: Audio adjustments in menu are allowed by user.ON : Locks all audio adjustments except Balance.—Allows installer to choose one of three options. ChoicesLOGOare and .: No logo when TV is turned on. TV goes directly to source.OFF: Displays Hisense TV logo.HISENSE: Displays welcome logo.WELCameOFF, HISENSE WELCOMEComponent2,PC(computer),HDMI1,HDMI2,HDMI3 and DMP.
18CLONE(copy) settings to any additional units you are installing.First plug in USB driver to unit that is already set up. A---Select READ OUT which brings up cloning function.B---Select YES to clone (copy). When complete, TV will show uploadC---success. Hotel Menu will close automatically.MAX VOLUME —Allows installer to adjust max volume from 0 to 100.: TV will stay on with no signal.OFFMIN VOLUME —Allows installer to adjust minimum volume from 0 to 100.The volume value can be input by digit-number buttons on remote.The volume value can be input by digit-number buttons on remote.AUTO Standby: TV goes to Standby mode when there is no signal after 15 mimutes.ONhotel settings menu.CHANNEL SETTINGS —Allows access to channel setting without exiting In channel setting mode, Allows edit and Program Guide Editremapping and editing of channels available. Using the color keysinstaller can change channel position and name.ON : No detail information on channel.info may also be available depending on provider.LTDN40V86MH Hotel SettingsInput SelectionOFF: Locked down (disabled).ON : Usable.Info LockOFF: Programing name and description (if available) aredisplayed when info button on remote is touched. Programing Feature Lock—Locks Feature menu adjustment in menu.—Locks Installation menu adjustment in menu.—Locks DMP menu adjustment in menu.Installation LockDMP LockV-Chip—Locks V-Chip function in menu.Hotel mute——Hotel Channel Setting TVSelect: Enter: OK Exit: EXITDigital Page2/1NO# Name PHY. Program SkipRename: Skip: Copy: Delete: Insert:23 5-123 5-223 5-323 5-417 1729 2945 4557 5769 69-169 69-212345678910CLONING OPTION 2.Take loaded USB drive to next unit, plug in next installationA---Plug in loaded USB drive.B---Turn TV on.C---Go to Menu.D---Go to Audio menu.E---Go to Balance. Use arrows to adjust to zero.F---Enter access code 548 with remote number key. Hotel menuG---unit (You do not need to have sources connected).Go to clone near bottom.H---opens.Choose option Write In. Hit Enter on remote. Cloning option J---will appear on screen.Select Yes. System will acknowledge download success. TVk---will be cloned.SSID setting—Set or reset SSID code for Pro:Idiom decording. Set SSID: Reset to factory default code.yes—Enter new SSID code.Reset SSID—Reset SSID code to factory default value.: Maintain current settings.No: TV is muted. User can not adjust volume.Allows installer to mute TV speaker.ON: TV is not muted. User can adjust volume.OFFCLONING OPTION 1.Plug in new TV.A---Plug in loaded USB drive.B---Turn TV on.C---Press menu.D---Key in numbers 2 5 6 6 3 on remote.E---Cloning option will appear on screen.F---SW Version—shows current software version information.

Navigation menu