Hisense Electric LCDC0030 Part15 Subpart B-LED LCD TV User Manual W9HLCDC0030

Hisense Electric Co., Ltd. Part15 Subpart B-LED LCD TV W9HLCDC0030

W9HLCDC0030_User Manual

ES-G132207 EspañolMANUAL DEL USUARIOAntes de utilizar el televisor, por favor lea este manualdetenidamente y consérvelo para futuras referencias.
EnglishES-G132207
I
IIImportant Safety Instructions1. Read these instructions.2. Keep these instructions. 3. Heed all warnings.4. Follow all instructions.5. Do not use this apparatus near water.6. Clean only with dry cloth.7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.11. Only use attachments/accessories specified by the manufacturer.12. Use only with cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.13. Unplug this apparatus during lightning storms or when unused for long periods of time.14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.15. Apparatus should not be exposed to dripping or splashing, and objects filled with liquids, such as vases, should not be placed on the apparatus.16. An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits, as contact with them might be fatal.17. Do not overload wall outlets and extension cords, as this can result in a risk of fire or electric shock.18. Do not push objects through any openings in this unit, as they may touch dangerous voltage points or short out parts that could result in fire or electric shock. Never spill or spray any type of liquid into the unit.19. If an outside antenna or cable system is connected to the unit, be sure the antenna or cable system is grounded to provide some protection against voltage surges and built-up static charges, Section 810 of the National Electrical Code, ANSI/NFPA 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.20. When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.21. Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks to determine that the unit is in proper operating condition.The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufcient magnitude to constitute a risk of electric shock.The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
IIIImportant Safety InstructionsYour TV also contains material that can be recycled and reused. For disposal or recycling information, contact your local authorities or the Electronic Industries Alliance at www.eia.org to find a recycler in your area.End of life directivesPower sourceWARNINGDo not connect this unit to the power using any device other than the supplied AC cord. This could cause fire, electrical shock, or damage.Do not use with a voltage other than the power voltage specified. This could cause fire, electrical shock, or damage.TO USE AC POWER1. The power cord is attached to the TV at the factory.2. Connect the AC cord into an AC outlet.CAUTIONWhen this unit is not used for a long time, (e.g., away on a trip) in the interest of safety, be sure to unplug it from the AC outlet.Do not plug/unplug the AC cord when your hands are wet. This may cause electrical shock.The LCD panel contains almost 3 million thin film transistors, which provide exceptionally sharp video quality. Occasionally, a few non-active pixels may appear on the screen as a fixed black (in the case of a dead pixel), blue, green, or red point. These non-active pixels do not adversely affect the performance of your TV, and are not considered defects.Non-active pixels22. When you connect the product to other equipment, turn off the power and unplug all of the equipment from the wall outlet. Failure to do so may cause an electric shock and serious personal injury. Read the owner's manual of the other equipment carefully and follow the instructions when making any connections.23. Sudden high volume sound may cause hearing or speaker damage. When you use headphones, (if the unit is equipped with a headphone jack) keep the volume at a moderate level. If you use headphones continuously with high volume sound, it may cause hearing damage.CONDENSATION: Moisture will form in the operating section of the unit if the unit is brought from cool surroundings into a warm room or if the temperature of the room rises suddenly. When this happens, unit's performance will be impaired. To prevent this, let the unit stand in its new surroundings for about an hour before switching it on, or make sure that the room temperature rises gradually.Condensation may also form during the summer if the unit is exposed to the breeze from an air conditioner. In such cases, change the location of the unit.HOW TO HANDLE THE LCD PANEL: Do not press hard or jolt the LCD panel. It may cause the LCD panel glass to break and injury may occur. If the LCD panel is broken, make absolutely sure that you do not touch the liquid in the panel. This may cause skin inflammation.If the liquid gets in your mouth, immediately gargle and consult with your doctor. Also, if the liquid gets in your eyes or touches your skin, consult with your doctor after rinsing for at least 15 minutes or longer in clean water.Possible Adverse Effects on LCD Panel: If a fixed (non-moving) pattern remains on the LCD Panel for long periods of time, the image can become permanently engrained in the LCD Panel and cause subtle but permanent ghost images. This type of damage is NOT COVERED BY YOUR WARRANTY. Never leave your LCD Panel on for long periods of time while it is displaying the following formats or images: Fixed Images, such as stock tickers, video game patterns, TV station logos, and websites. Special Formats that do not use the entire screen. For example, viewing letterbox style (16:9) media on a normal (4:3) display (black bars at top and bottom of screen); or viewing normal style (4:3) media on a widescreen (16:9) display (black bars on left and right sides of screen).The following symptoms are not signs of malfunction but technical limitation. Therefore we disclaim any responsibility for these symptoms. LCD Panels are manufactured using an extremely high level of precision technology, however sometimes parts of the screen may be missing picture elements or have luminous spots.This is not a sign of a malfunction. Do not install the LCD Panel near electronic equipment that produces electromagnetic waves. Some equipment placed too near this unit may cause interference. Effect on infrared devices - There may be interference while using infrared devices such as infrared cordless headphones.Declaration of ConformityThis device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference and (2)This device must accept any interference received, including interference that may cause undesired operation.
IV
V
VIImportant Safety InstructionsWhen Installing the TV Against a Wall or Enclosed AreaInstall with standNever install the TV set as follows:Install on the wallMake sure that your TV has adequate air circulation. Allow enough space around the TV as shown below. Avoid operating the TV at temperatures below Inadequate air 41°F (5°C).Leave at least this much space around the set.Leave at least this much space around the set.4 inches(10cm)4 inches(10cm) 4 inches(10cm)4 inches(10cm)4 inches(10cm)2 3⁄8 inches(6cm)12 inches(30cm) 12 inches(30cm)Wall WallAir circulation is blocked.Inadequate air circulation can lead to overheating of the TV and may cause damage to your TV or cause a re.
VIILegal NoticesFCC StatementNOTE:This equipment has been tested and found to comply with the limits for a class B digital Device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio Communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and the receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. WARNINGThe manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority.Hisense and associated logos where applicable are registered trademarks of Hisense Group in the United States and/or other countries. All other trademarks are property of their respective owners. 2013 Hisense USA, Corporation. All Rights Reserved. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.* Specications subject to change without notice.ENERGY STAR®This television’s factory default settings as shipped meet ENERGY STAR requirements.This TV has an Auto Shut Off feature that will automatically turn off the TV if there is no video signals detected within 15 minutes Additionally this TV has LED backlighting which has greater energy saving benets versus conventional CCFL type TV.This TV incorporates High-Denition Multimedia Interface (HDMITM) technology. HDMI, the HDMI logo and High-Denition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.NOTEWhere the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.Energy StarYour Hisense TV is ENERGY STAR qualified in the “Energy Savings” mode. It meets strict energy efficiency guidelines set by the U.S. Environmental Protection Agency and Department of Energy. ENERGY STAR is a joint program of these government agencies, designed to promote energy efficient products and practices. Changes to certain features, settings, and functionalities of this TV (i.e. TV Guide, Picture, Sound) can increase or change the power consumption. Depending upon such changed settings, the power consumption may exceed the limits required for the ENERGY STAR qualification in the “Energy Savings” mode.
1ContentsGetting StartedViewing the Remote Control ............................................................................2Installing Batteries in the Remote Control .......................................................3Making Connections ........................................................................................ 4Basic FeaturesTurning your TV on or off .................................................................................7Turning the TV for the First Time ..................................................................... 7Selecting the Input Source ..............................................................................8Changing Channels / Volume .......................................................................... 8Shortcuts Instructions ...................................................................................... 8To Use the Menu ............................................................................................. 9Using the Video Menu .....................................................................................9Using the Audio Menu ....................................................................................10Using the TV Menu ......................................................................................... 10Using the Setup Menu .................................................................................... 11Using the Parental Menu ................................................................................ 12Using the Hotel Menu ..................................................................................... 13Advanced FeaturesDigital Media Player........................................................................................15Enjoy Video Files ............................................................................................ 15Browse the Pictures........................................................................................15Playable Format List .......................................................................................16Other InformationTrouble Shooting ............................................................................................17Specifications .................................................................................................19
2Viewing the Remote ControlGetting StartedNOTEThe Picture is Only for Reference.Power on/off▲/▲/▲/▲Move Up/Down/Left/Rightor adjust settingsSelect input sourceRemote sensorDecrease volumeSelect USB sourceSelect sound modeSet the sleep timerMedia content control function buttonsIncrease volumeAdjust closed caption modeDisplay the current timeMENU button Close the menuDash buttonSelect a digital sub-channel Go to the previous channelMedia content control function buttonsNot availableNot availableConrm selectionsMUTE buttonZoom buttonDisplay the information bannerDisplay the channel nameNext channelSelect picture modePrevious channelSelect AV / VGA / COMPONENT / HDMI sourceSelect TV sourceAudio select buttonMono/Stereo/SAP operationDirect channel selectionMMTTSS//SSAAPPMUTEEXITCCOOMMPPOONNEENNTTHHDDMMIIRREETTUURRNNDDIISSPPLLAAYYMENUSSLLEEEEPPVVGGAA--TVCH.LISTLLAASSTTCCDSSOOUUNNDDENTERPPIICCTTUURREEINPUTGUIDEASPECTUSBTIMEAV
3Installing Batteries in the Remote ControlGetting Started1. Press the release button on the back of the remote control to remove the battery compartment cover. 2. Insert two AAA size batteries. Make sure to match the (+) and ( - ) ends of the batteries with the (+) and ( - ) ends indicated in the battery compartment.3. Replace the battery compartment cover and secure with one screw (ST2X6) provided.1. The remote control distance: 315 inches in front of the TV set.2. The remote control angle: taking the television infrared light receiver window as an apex, 236 inches away, its controlled angle (left to right) is within 30 degrees, while the vertical angle (up to down) is within 30 degrees.NOTES1. Dispose of your batteries in a designated disposal area. Do not throw the batteries into a fire.2. Do not mix battery types or combine used batteries with new ones.3. Remove depleted batteries immediately to prevent battery acid from leaking into the battery compartment.4. If you do not intend to use the remote control for a long time, remove the batteries.5. Batteries should not be exposed to excessive heat, such as sunshine, heat registers, or fire.6. Battery chemicals can cause a rash. If the batteries leak, clean the battery compartment with a cloth. If chemicals touch your skin, wash immediately.7. Do not mix old and new batteries.8. Do not mix alkaline, standard (carbon-zinc) or rechargeable (ni-cad, ni-mh, etc.) batteries.Program Your Universal Cable or Satellite Remote Control to Operate Your New Hisense Television!If you would like to program your other household remote controls to your new Hisense television,please consult the User’s Manual supplied by your Cable or Satellite provider. The Cable or Satellite providers’ User’s Manuals should include instructions on how to program their remote to your television.Below is a list of Hisense codes for the most common Cable and Satellite providers. Use the Hisense code that is associated with your Cable or Satellite provider (if applicable). DIRECTV……………………..…0178 or 10019Time Warner Cable………….…386 or 0178Comcast…………………………0178 or 10178 Cox Communications………..…0178Dish Network……………………627 or 505AT&T U-verse...........................1346If the Hisense code associated with your Cable or Satellite provider is not listed above,if the code above does not work, or if you cannot locate the instructions for programming your household remote to your television,call your local Cable or Satellite provider’s customer service center.Change the batteriesThe effective range of remote controlscrew (ST2X6)
4Making connectionsGetting StartedNOTESCheck the jacks for position and type before making any connections. Loose connections can result in image or color problems. Make sure that all connections are tight and secure.Not all A/V devices have the ability to connect to a TV, please refer to the user manual of your A/V device for compatibility and connections procedure. Always unplug the power cord when connecting external equipment.Connecting an antenna, cable or cable/satellite boxConnecting an A/V Device with Composite Cableor ANT OUTCableVHF/UHF AntennaEXTERNAL DEVICESTV JACK1. Turn off the TV before connecting the antenna.2. Connect one end of a coaxial cable (not included) to the RF OUT jack on the antenna, cable or cable/satellite box. If you are using an antenna with twin-lead cable, you may need a 300-75 ohm adapter (not provided) to connect it to the back of your TV. Likewise, if you are using several antennas, you may need a combiner (not provided). 3. Connect the other end of the cable to the ANT/CABLE jack on the side of your TV. 1. Use the audio and video cables to connect the external A/V device’s composite video/audio jacks to the TV’s jacks. (Video = yellow, Audio Left = white, and Audio Right = red)2. Plug the connected devices into the mains socket before switching on the TV.3. Select the corresponding source from the TV. ANT/CABLEEquipment with A/V jacksDVD Player/RecorderVideo CameraEXTERNAL DEVICESSet-top boxSatellite ReceiverSatellite antenna cableVCRA/V OUTVideoLRWhite(L)White(L)Yellow(Video)Yellow(Video)Red(R)Red(R)TV JACKAV Cable (not included)VIDEO L RAV IN
5Getting StartedConnecting an A/V Device with Component (YPBPR) CableConnecting an A/V Device with HDMI CableConnecting a headphone1. Use a component cable to connect the external A/V device’s component output jacks to the TV’s YPBPR jacks. Use an audio cable to connect the external A/V device’s component audio jacks to the TV’s AUDIO (L/R) jacks. 2. Plug the connected devices into the mains socket before switching on the TV. 3. Select the corresponding source from the TV. Support digital connections between HDMI - enabled A/V devices such as PVR, DVD, Blu-ray, AV receiver and digital devices. Some devices such as PVR or DVD player require HDMI signal to be set to output in the device's settings.Please consult your device user manual for instructions. 1. Use an HDMI cable to connect the A/V device’s HDMI output jack to the TV’s HDMI jack. 2. Plug the connected devices into the mains socket before switching on the TV .3. Select the corresponding source from the TV. Headphones can be connected to the /AUDIO OUT output on your set. (While the headphone is connected, the sound from the built-in speakers will be disabled.)NOTEThe HDMI connector provides both video and audio signals, it’s not necessary to connect the audio cable.Y PBPRCOMPONENT INL REquipment with A/V jacksDVD Player/RecorderVideo CameraEXTERNAL DEVICESSet-top boxSatellite ReceiverSatellite antenna cableVCRWhite(L)White(L)Red(R)Red(R)Audio Cable (not included)Component Cable (not included)HDMIHDMITV JACKEXTERNAL DEVICESDVD Player/RecorderSet-top boxEquipment with HDMI jacksHDMI Cable (not included)TV JACKComponentRLPRPBYPR/CRPR/CRPB/CBPB/CBYYAUDIO OUTEXTERNAL DEVICESTV JACK /AUDIO OUT
6Getting StartedConnecting a PC with VGA Cable1. Use a VGA cable to connect the PC’s VGA output jack to the TV’s VGA jack. Use an audio cable to connect the PC’s audio output jack to TV’s PC/DVI AUDIO IN jack. 2. Plug the connected devices into the mains socket before switching on the TV. 3. Select the corresponding source from the TV. NOTESPrimarily this unit is intended for use as an LCD TV. If you want to use it as a monitor, please contact the manufacturer of the PC Video/Graphic's card for further support. Perfect compatibility is not warranted.The VGA cable will not supplied with the product. We strongly recommend to use VGA cable with 2 cores as shown in the figure.EXTERNAL DEVICESComputerTV JACKVGA PC/DVI AUDIO INAudio Cable (not included)VGA Cable (not included)Connecting an Audio Receiver with Audio cable1. Use an audio cable to connect the A/V device’s digital audio in jack to the TV’s DIGITAL OUTPUT jack. Or use an RCA Y-cable (1/8”-stereo mini to L/R phono - not provided) to connect analog sound system to the TV’s /AUDIO OUT jack.2. Plug the connected devices into the mains socket before switching on the TV.3. Select the corresponding source from the TV. NOTESWhen a digital audio system is connected to the DIGITAL OUTPUT (COAXIAL) jack, decrease the volume of both the TV and the system. 5.1 CH (channel) audio is available when the TV is connected to an external device supporting 5.1 CH.When the receiver (home theater) is set to on, you can hear sound output from the TV’s digital audio out jack. When the TV is receiving a DTV signal, the TV will send 5.1 CH sound to the home theater receiver. When the source is connected to the TV via HDMI, only 2 CH audio will be heard from the home theater receiver. If you want to hear 5.1 CH audio, connect the digital audio out jack from your DVD/Blu-ray player/cable box/STB satellite receiver directly to an amplifier or home theater.TV JACKSEXTERNAL DEVICESPowerless Bass SpeakerSpeakerAudio AmplierDIGITALOUTPUTWhite(L)Red(R)Audio Cable (not included)Audio Cable (not included) /AUDIO OUT
7Basic FeaturesTo turn your TV on or off (standby mode):1. Plug the power cord into an AC power outlet.2. Press [POWER] button. Your TV turns on. 3. Press [POWER] button again to turn off your TV. When you turn off your TV, it goes into standby mode.Turning your TV on or offTurning the TV On for the First TimeWARNINGWhen your TV is in standby mode, it is still receiving power. To completely disconnect power, unplug the power cord.NOTEIf your TV does not receive an input signal for several minutes, it automatically goes into standby mode.The Setup Wizard menu appears the first time you turn on the TV. It will assist you to specify the menu language, Picture Mode, Tuner Mode and Channel Installation.IMPORTANT: Make sure that the antenna or cable is connected.1. Make sure that you have:Installed the remote control batteries.Connected an antenna or cable.Connected the power cord.2. Connect your TV’s power cord to a power outlet, then press power. The Initial Setup screen opens.3. Please press [ENTER] to start the wizard, then press [▲/▲] button to select your language, press [ENTER] button to confirm.4. Press [▲/▼] to select your Picture Mode: Home Mode or Retail Mode, press [ENTER] button to confirm.If you select Retail Mode, a message appears “If you select Retail Mode, then Energy saving is not realized. Are you sure?” Select “Yes” to continue, or select “No” to change your selection.5. Press [▲/▼] to select your Tuner Mode: Antenna or Cable, press [ENTER] button to confirm.6. Press [▲/▼] to set the Channel Installation: Scan or SkipScan, press [ENTER] button to confirm.If you select “Scan”, your TV automatically starts ChannelInstallation available in your viewing area.If you select “Skip Scan”, your TV does not scan forchannels.Depending on the reception condition, it may take several minutes to scan channels. Please allow the process to complete without interruption.Initial Setup WelcomeWelcome to use the Wizard forInitial Setup!!Please press [ ENTER ] to start thewizard.Initial Setup LanguagePlease select your language: Back Select Next EXIT ExitEnglishEspañolFrançaisInitial Setup Picture ModeChoose Your Picture Mode:Home mode default settings are recommended for in-home use.ENERGY STAR® qualied.Retail mode is intended for in-store display and resets video settings at Power On.Home ModeRetail Mode Back Select Next EXIT ExitInitial Setup TunerPlease select your tuner mode: AntennaCable Back Select Next EXIT ExitInitial Setup Channel ScanFirst, please connect cable and/or antenna.Start channel scan now?If you skip this step, the channel scan could be performed in Menu.ScanSkip Scan Back Select Next EXIT Exit
8Basic Features1. Press the [CH V/V] (or [CH +/-]) on the TV/remote control to change the channel.2. Press the [VOL V/V] (or [VOL +/-]) on the TV/remote control to adjust the volume.3. Press the numeric buttons on the remote control to display the corresponding channels.Changing Channels / VolumeThe first time you turn on your TV, you must select the TV signal source. Your TV stores this information, so you do not need to change the TV signal source unless it changes. For example, you change from an outside antenna to cable TV.To select the video input source:1. Turn on your TV, then press [INPUT] button on the remote or on the TV. The Input Source menu opens.2. Press [▲/▲] button to highlight the input source, then press [ENTER] button.Selecting the Input SourceNOTEChanging the channels can also be achieved by directly entering the channel number using the numeric keys on the remote control. If you are entering a two or three digit channel number, the time between key presses should be less than 3 seconds.Aspect - Select the screen aspect ratio from Auto, Normal, Wide, Zoom and Cinema.Normal: The original 4:3 aspect ratio (1.33:1 signal) is preserved, so black bars are added to the left and right of the image. Standard TV broadcasts are displayed with a 4:3 aspect ratio.Wide: When watching a standard broadcast or full-frame movie in this mode, the display image is stretched proportionately to fill the TV screen. When watching a widescreen (1.78:1 signal) program or movie, the display image fills the TV screen.Shortcuts InstructionsAuto: Automatically adjusts the image based on the screen size and the TV program.Zoom: Stretch the 4:3 aspect ratio image vertically and horizontally to fill the screen at 1:1.78 aspect ratio.Cinema: Stretch the 4:3 aspect ratio image vertically and horizontally to fill the screen at 1:2.35 aspect ratio. Picture - Press to set the picture mode. It can be set as Vivid, Standard, Energy Savings, Game, Theater or Custom. This mode achieves a certain image display effect by setting the brightness, contrast and color etc.Sound - Press to set the sound mode. It can be set as Standard, Theater, News, Music and Custom.Mute - Press to turn the sound off, press this button again to turn the sound back on. This function is used to switch off sound temporarily.Sleep - It can set the TV to let it enter into the Standby state automatically. Press this button repeatedly to select the proper sleeping clock mode, and the clock tells you the remaining time before the TV enters Standby state. Display - Display the information banner. The information including channel number, channel name, current system time, tuner mode, audio stream, video format, audio language, closed caption mode, parental locks rated, program details, etc.NOTEThe Game mode is not available in ATV and USB source.
9Using the Video Menu You can adjust: Picture Mode - Adjust the Picture Mode. You can select Vivid, Standard, Energy Saving, game, Theater or Custom.Brightness - Increase or decrease the brightness of the picture. Increasing the brightness can add more light to dark areas of the picture, while decreasing the brightness can add more darkness to light areas of the picture.Contrast - Increase or decrease the contrast of the picture. Increase the contrast to adjust the white areas of the picture or decrease the contrast to adjust the black areas of the picture.Saturation - Adjust the intensity of the colors.HUE - Adjust the overall color of the picture.Sharpness - You can increase the sharpness level for clearer images or decrease the sharpness level for smoother images.Advanced Video - Access advanced video settings such as Back Light, Color Temperature and DNR.Basic FeaturesTo Use the Menu1Press the [MENU] to open the main menu.2Press [▲/▲] to select a menu option, then press [▲/ENTER] button to enter the menu.3In each menu, you can: Press [▲/▲] to select an item, Press [▲/▲] to adjust the value, orPress [▲/ENTER] to enter the submenu, Press [MENU] to back the previous menu. 4Press [EXIT] to exit the menu.NOTEThe menus in the user manual may vary slightly from the actual screen.Picture Mode StandardBrightnessContrastSaturationHUESharpnessAdvanced VideoReset Video SettingsThe TV qualies for ENERGY STAR in Energy Saving mode.505050010 Select MENU BackVideoBack Light: Sets the overall brilliance of the screen. When the option of Adaptive Back Light sets Low or High, you cannot change the Back Light setting.120HZ Smooth Effect: Inserts frames to reduce judder in fast action scenes. You can select On or Off.Aspect Ratio: To choose the screen aspect ration from Wide, Auto, Normal, Zoom and Cinema.Color Temperature: Change the color temperature. You can select the color temperature from three options: Cool, Standard or Warm.Overscan: Adjusts the picture’s reproduction rate. You can select On or Off.DNR: Select to reduce the noise level of connected equipment: off, Low, Medium, Strong, Auto.Adaptive Luma Control: According to the content of picture, it can adjust brightness automatically.Adaptive Back Light: Enhances the contrast ratio between light and dark areas of the picture. You can select Off, Low, or High.Reset Video Settings - Resets all Video Settings to the factory defaults.NOTEThe option of the screen Aspect Ration is different in different inputs. (For more information, see “Shortcuts Instructions”)NOTEOnly available in DTV, HDMI (Except Game mode) and Component source.NOTEOnly Model 50” has this function.Picture Mode StandardBrightnessContrastSaturationHUESharpnessAdvanced VideoReset Video SettingsThe TV qualies for ENERGY STAR in Energy Saving mode.505050010 Select MENU BackVideo
10Basic FeaturesYou can adjust: Tuner Mode - Select the TV signal source. You can select Antenna or Cable.Channel Scan - Scans for channels that have signals and stores the channels information in memory.Digital Channels: The scanned TV program in digital signals.Analog Channels: The scanned TV program in analog signals.Channel Skip - You can cancel a channel stored in memory.Using the TV MenuTuner ModeChannel ScanChannel SkipFavorite ListAudio OnlyCableOffTV Select MENU BackChannel Scan EXIT CannelStatus: Scanning... AntennaAnalog Channels: 0Digital Channels: 11%Using the Audio MenuYou can adjust: Sound Mode - Select the Sound Mode: Standard, Theater, News, Music or Custom.Balance - Adjust the volume of the left and right speakers.Equalizer - Soften or enhance the sound at specific frequency points.Speaker - Selects where to play TV audio. You can select On (default setting) to play audio through TV speakers, or select Off to play audio through the speakers on an external audio system.Auto Volume Control - Automatically adjusts volume to a consistent level; attenuates loud passages.Advanced Audio - Access Advanced Audio settings such as SPDIF Type, MTS, Audio Language. SPDIF Type: Send digital audio to an external audio system. You can select PCM, RAW or Off.PCM: PCM outputs two channel audio regardless of the input format.RAW: When the data stream carries Dolby signal, digital SPDIF outputs Dolby data stream. When the data stream carries no Dolby signal, it transports PCM data stream.MTS: Select the default audio stream, you can select Mono, Stereo or SAP (Second Audio Program). MONO: Select this option if there is noise or static on weak stereo broadcasts.STEREO: Select this option for programs broadcast in stereo.Sound ModeBalanceEqualizerSpeakerAuto Volume ControlAdvanced AudioReset Audio Settings0MusicOnOffAudioENTER Adjust Select MENU BackSPDIF TypeMTSAudio LanguagePCMStereoEnglishAdvanced Audio Select MENU BackSAP: Depending on the particular program being broadcast, you can listen to a foreign-language translation.Audio Language - Change the default value for audio language. (Digital channels only)Reset Audio Settings - Resets all Audio Settings to the factory defaults.NOTEWhen you press [CH V/V] (or [CH +/-]) button, your TV skips the channel you cancelled. You can still tune to the channel using the number buttons on the remote control.
11Using the Setup MenuBasic FeaturesNOTESAudio Only works only when the input source is TV, and your TV is receiving a broadcast signal.To exit audio only mode, press any button. When you exit audio only mode, the Audio Only option is automatically reset to Off.Favorite List - Display your Favorite List. You can add or delete channels to create your favorite list.Audio Only - Listen to the program audio only, when you turn off the picture on your TV.You can adjust: Closed Caption - Adjust Closed Caption settings.CC Mode: To select CC Off (turns off closed caption), CC On (turns on closed caption), or CC on when Mute (turns on closed caption when the sound is muted).CC ModeAnalog Closed CaptionDigital Closed CaptionDigital Caption StyleCC OffCC1Service1Closed Caption Select MENU BackAnalog Closed Caption: Select an Analog Caption setting from CC1~CC4, TEXT1~TEXT4.Digital Closed Caption: Select a Digital Caption setting: Service1~Service6.Digital Caption Style: There are two Caption Styles. One is the automatic function set as the broadcaster, while the other is the custom style where you can adjust the font size, color, opacity, background color etc..Time - Access Time settings such as Time Zone, Date/Time, Sleep Timer.Time Zone: Select your local time zone: Eastern Time, Hawaii, Alaska, Arizona, Indiana, Mountain Time, Central Time or Pacific Time.Date/Time: You can set time manually or select automatic if the TV is connected to an antenna or cable source.Auto Synchronization: Select “On” to for automatic date and time setting using information from broadcast stations in your area.Date: Set the current year/month/day.Time: Set the current time.Timer: When “On”, you can set the time when the TV turns on/off automatically.Power On Timer: Set the desired time for the TV to turn on automatically.Power Off Timer: Set the desired time for the TV to turn off automatically.Sleep Timer: Specify the amount of time before your TV automatically turns off.Menu Language - You can select the menu’s language to English, Spanish or French.HDMI-CEC - HDMI-CEC lets you control HDMI CEC-compatible devices connected to the HDMI jacks on your TV using the remote control that came with your TV. To use HDMI-CEC, you must set the HDMI-CEC Control setting on the Settings-HDMI-CEC menu to On.Closed CaptionTimeMenu LanguageHDMI-CECComputer SettingsComponent SettingsVersion InfoReset DefaultEnglishSetupENTER Set Select MENU BackTime ZoneDate/TimeSleep Timer OffTime Select MENU BackFavorite ListAnalogAnalogAnalogAnalogAnalogAnalogAnalogAnalogAnalog123456789ENTER Set Select MENU Back
12Using the Parental MenuWhen you first use this function, the default password is [0000]. Once you input this password, you can set options.You can adjust: Button Lock - Block or unblock the button of Keypad. Rating Enable - Block or unblock TV ratings.Block Unrated - Block unrated TV programs.U.S. TV Ratings - Restrict TV programs by USA Ratings.Open V-Chip: Display an advanced V-Chip ratings table for digital channels (USA only).Block Unrated: Block unrated TV programs.U.S. Movie Ratings - Restrict movie by USA Ratings.Canadian English/French Ratings - Restrict movie and TV programs by Canadian Ratings.Change Password - If you want to change the default password, first enter the new password then enter the same password again.Basic FeaturesButton LockRating EnableBlock UnratedU.S. TV RatingsU.S. Movie RatingsCanadian English RatingsCanadian French RatingsChange PasswordOffOffOffParental Select MENU BackNOTESHDMI cables must be used to connect HDMI CEC-compatible devices to your TV.The connected device’s HDMI CEC feature must be turned on.If you connect an HDMI device that is not HDMI CEC-compatible, all the HDMI-CEC Control features do not work.Depending on the connected HDMI device, the HDMI-CEC Control feature may not work.HDMI-CEC Control: Turning HDMI-CEC function on or off. Device Auto Power Off: When HDMI-CEC is turned on, Device Auto Power Off turns off HDMI CEC devices when you turn off your TV.TV Auto Power On: When HDMI-CEC is turned on and you turn on an HDMI CEC device, TV Auto Power On turns on your TV automatically.Audio Receiver: When HDMI-CEC is turned on and you have connected an audio receiver to your TV, turning on Audio Receiver lets you use your TV’s remote control to control the volume on the audio receiver.Root Menu: You can open an HDMI-CEC-compatible device’s root menu, then use your TV’s remote control to control the device.HDMI-CEC Device Lists: You can display a list of HDMI CEC devices that are connected to your TV.Computer Settings (Only available in VGA mode.)- Access Computer Settings such as H.Position, V.Position, Phase, Clock and Auto Adjust.H.Position: Move the image right or left.V.Position: Move the image up or down.Phase: Adjust the focus of stable images.Clock: Adjust the sample frequency.Auto Adjust: Detects input signal clock, phase and position and adjusts TV display accordingly.Component Settings (Only available in Component mode.) - Access Component Settings such as phase, Reset Component Settings.HDMI-CEC ControlDevice Auto Power OffTV Auto Power OnAudio ReceiverRoot MenuHDMI-CEC Device ListsOnOffOffOffHDMI-CEC Select MENU BackPhase: Adjust the focus of stable images.Reset Component Settings: This function can help you restore the component settings.Version Info - Display the software version information. Reset Default - Every TV has its original setting before leaving the factory. This function can help you restore these settings.PhaseReset Component Settings12Component SettingsENTER Adjust Select MENU Back
13Basic FeaturesCanadian French RatingsRating DescriptionG General8 ans+ 8+General; Not recommended for young children13 ans+ Programming may not be suitable for children under the age of 1316 ans+ Programming is not be suitable for children under the age of 1618 ans+ Programming restricted to adultsCanadian English RatingsRating DescriptionC ChildrenC8+ Children 8 years and olderGGeneral Programming, suitable for all audiencesPG Parents Guidance14+ Viewers 14 years and older18+ Adult ProgrammingNOTEAs you block rating, all rating higher than the ones you select are blocked as well. E.g. if you choose to block the MPAA rating R, the higher ratings, NC-17 and X, are automatically blocked too.Following is the description of these ratings.U.S. TV RatingsAge Defined asTV-Y All childrenTV-Y7 Directed to older childrenTV-G General audienceTV-PG Parental Guidance suggestedTV-14 Parents Strongly cautionedTV-MA Mature Audience onlyContents Defined asAAll of the ratings below that rating set blocked automaticallyD Suggestive dialogueL Strong languageS Sexual situationsV ViolenceFV Fantasy ViolenceU.S. Movie RatingsRating Defined asG General audiencePG Parental Guidance suggestedPG-13 Parents strongly cautionedR RestrictedNC-17 No one 17 and under admittedX Adult audience onlyUsing the Hotel MenuFollow”MENU”>”AUDIO”>”BALANCE”(setting is 0)”, Input “548“ by remote control to open hotel menu.You can adjust: Restore - Clone the TV channel setting from the USB flash driver to this TV.Turn a new TV on and insert the USB flash driver( with "HOTEL.bin" file in) to USB port.Sound ModeBalanceEqualizerSpeakerAuto Volume ControlAdvanced AudioReset Audio Settings0MusicOnOffAudioENTER Adjust Select MENU BackRestoreCloneHotel modeKB lockMax volumeOn volumeMin volumeOn channelTuner ModeOn source100200Hotel Menu Select MENU BackOnOff2AntennaLast
14Use UP/DOWN arrow button to highlight "Restore" and press ENTER button to restore the channel setting.Remove USB flash driver. Turn the TV off and Turn it on again to check the setting.Clone - Clone the TV channel setting to USB flash driver. Turn the TV on and insert the USB flash driver to USB port.Use UP/DOWN arrow button to highlight "Clone" and press ENTER button to clone. Hotel menu will exit automatically when finish clone the channel setting.Remove USB flash driver and check it. There will be a "HOTEL.bin" file in the USB flash driver. Hotel Mode - Enable or disable the setting in hotel menu. Set to "ON": The following HOTEL functions can be used.Set to "OFF": Hotel Mode is switched off. The following HOTEL functions cannot be used.KB Lock - TV keyboard lock setting.Select "ON", TV keyboard button doesn't work when customer press it.Select "OFF", TV keyboard works as normal TV when customer press it.Max Volume - Control the max volume that can be adjusted by customer. Setting range is from 0 to 100.On Volume - Force the default volume when turn the TV on. Setting range is from 0 to 100(less than or equal to the max volume)Min Volume - Control the Min volume that can be adjusted by customer. Setting range is from 0 to 100(less than or equal to the On volume)On Channel - Force the default channel in TV source when turn the TV on.Setting range is from 1 to 135 in cable model.Setting range is from 2 to 69 in Antenna model.LAST means TV will show the last watch channel when turn TV on again.Tuner Mode - Select cable or antenna in the TV source.Select Cable to enable cable model.Select Antenna to enable antenna model.On Source - Force the input source when turn the TV on. Setting range includes all input sources and LAST. LAST means TV will show the last watch source when turn TV on again.User Save Lock - Control to restore the customer setting or default setting when turn on the TV.Select "ON" to restore the default setting when turn on the TV.Select "OFF" to restore the customer setting when turn on the TV.Basic Setting - Enable or disable standard mode setting. Select "ON" to force video mode, audio mode to "Vivid" mode and Zoom to "Wide" mode. And disable User Save Lock function.Select "OFF" to disable the function.NOTE"Basic setting" is prior than "Use save lock" function.Auto Standby - TV Power management.Select "ON" to turn TV off after 15 minutes if there is no input signal.Select "OFF" to turn TV on all the time.Search Lock - Enable or disable channel scan function.Select "ON" to enable channel scan function.Select "OFF" to disable channel scan functionSubmenu Lock - Enable or disable advance setting in picture menu.Select "ON" to disable advance setting in picture menu.Select "OFF" to enable advance setting in picture menu.Logo Option - Select type of Logo when turn TV on.Range includes "Default Logo", "No Logo", "Welcome" and "Hisense".NOTEAll changes take effect after restart TV. User Save LockBasic settingAuto StandbySearch LockSubmenu_LockLogo OptionSource LockHotel Menu Select MENU BackOffOffOffOffOffOffDefault logo
15Digital Media PlayerAdvanced FeaturesPlease note that Hisense will not assume any responsibility for any lost data and cannot guarantee perfect compatibility with all mass storage devices. Be sure to insert the USB disk with standard USB 2.0 port. Data Input from USB Memory Stick only. Do not connect any device to this terminal such as digital camera, keyboard, mouse, etc.Press [INPUT] button to display the INPUT menu, press [▲/▼] button to highlight the USB source, then press [ENTER] button to confirm. (If you want to exit DMP, you can press [INPUT] button to switch to other sources).Press [RED] button to switch the media type.Press [CH V/V] button to turn to the previous/next page.When viewing video/photo, you can press these buttons on the remote control to control video/photo.Media content control function buttonsNOTENever remove the USB flash drive or turn off your TV while viewing video/photo.NOTEWhen browsing the photos, only the , , and buttons are available.Enjoy Video FilesBrowse the Photos1. Press [RED] button to switch the media type to Video.2. Press [▲/▲/▲/▲] to select the video you want to view.3. Press [ENTER] to play the video.4. Press [EXIT] to exit the video and return to the previous directory.5. When enjoying the video, press [MENU] button to display/exit the menu. Press [▲/ENTER] to enter the submenu and press [▲/EXIT] to return to the upper menu.Play/Pause: You can play/pause the video.Repeat: Adjust the loop mode of video.Show Info: View the video information.Picture Mode: Select the picture mode from Vivid, Standard, Theater, Energy Savings and Custom.Screen Mode: Select the screen aspect ratio from Normal, Zoom, Wide, Cinema and Auto.Audio Mode: Select the audio mode from Standard, Theater, News, Music and Custom.6. You can press [MTS/SAP] button one or more times to select the sound track. Press [ASPECT] button one or more times to enlarge the image by 1X, 2X, 4X and 8X. 1. Press [RED] button to switch the media type to Photo.2. Press [▲/▲/▲/▲] to select the photo you want to view.3. Press [ENTER] to browse the photo.4. Press [EXIT] to return to the previous directory.5. When browsing photos, press [MENU] button to display /exit the menu. Press [▲/ENTER] to enter the submenu and press [▲/EXIT] to return to the upper menu.Play/Pause: You can browse/pause the photo.Repeat: Repeats the slide show when it reaches the end. Shufe: Displays the slide show photo in random order. Duration: Allows you to browse the photo at different speed. You can also press [GREEN] button to select it.Effect: Set how the photo appears on the screen. You can also press [YELLOW] button to select it.Rotate: Allows the photo to rotate 90 degrees.Show Info: View the photo information.GUIDEFast forwardPlayPauseFast backwardThe previous oneThe next oneStopNOTEWhen the photos in browsing or pausing, the menu will be different.Media Type01/01050680 PhotoFolderFolderFolder Folder Folder FolderJPEG 050680 JPEG
16Advanced FeaturesPlayable Format ListFile extension Container Video Decoder Resolution Bitrate (bps)*.avi AVIMPEG1 768*576 1.8MMPEG2 MP@HL 1920*1080 40MMPEG-4 SP@HL 3.0 1920*1080 40MMPEG-4 ASP@HL 4.0 1920*1080 40M*.wmv ASFMPEG-4 SP@HL 3.0 1920*1080 40M*.asf MPEG-4 ASP@HL 4.0 1920*1080 40M*.mp4 MP4MPEG-4 SP@HL 3.0 1920*1080 40M*.mov MPEG-4 ASP@HL 4.0 1920*1080 40M*.3gp*.mkv MKVMPEG-4 SP@HL 3.0 1920*1080 40MMPEG-4 ASP@HL 4.0 1920*1080 40M*.mpgPSMPEG1 768*576 1.8M*.mpeg*.vroMPEG2 MP@HL 1920*1080 40M*.vob*.ts TS MPEG2 MP@HL 1920*1080 40M*.ogm OGGMPEG2 MP@HL 1920*1080 40MMPEG-4 SP@HL 3.0 1920*1080 40MMPEG-4 ASP@HL 4.0 1920*1080 40MVideo Decoder Support List Audio Decoder Support ListFile extension Container Audio Decoder*.avi AVIMPEG1 Layer1/2MPEG2 AACMPEG4 AAC-LCMPEG4 HE-AACAC3*.MP4 MP4MPEG1 Layer1/2MPEG2 AACMPEG4 AAC-LCMPEG4 HE-AAC*.mpgPSMPEG1 Layer1/2*.mpeg*.vro AC3*.vob*.ts TSMPEG1 Layer1/2MPEG2 AACMPEG4 AAC-LCMPEG4 HE-AACAC3*.rm RM MP3MPEG2 AAC*.mkv MKVMPEG1 Layer1/2MPEG2 AACMPEG4 AAC-LCMPEG4 HE-AACAC3The unit recognizes only a USB Memory Stick.Do not use a USB hub or an extension cable to connect an external hard disk drive to the unit. (Not supported)A USB Memory Stick is always inserted to this unit directly.A USB Memory Stick is not supplied with this unit.We do not guarantee that all USB Memory Sticks can be supported by this unit.Be sure to keep a backup copy of the original files on your device before you play them back on this unit. We have no responsibilities for damage or loss of your stored data.To protect your USB Memory Stick files from being erased place the write protect sliding tab in the protect position.When you are ready to remove a USB Memory Stick, set the unit to go into Standby mode to avoid any damage to your data and the unit.A USB Memory Stick that requires its own driver or the device with a special system such as fingerprint recognition are not supported.This unit is not allowed to use the USB Memory Stick which requires an external power supply (500mA or more).NOTES
17Other InformationWhen there is something wrong with your TV, you can try turning off the TV and then restart it. You can also Operate according to the following chart. If the problem still cannot be solved, please contact the professional technicians.SYMPTOMS POSSIBLE SOLUTIONSNo sound or picture.Check if the power cord is in the AC outlet and if it has electricity.Check if you have pressed [POWER] button on the TV or [POWER] button on the remote control.Check to see if LED light is either red or blue. If illuminated, power to TV is OK.I have connected an external source to my TV and I get no picture and/or sound.Check for the correct output connection on the external source and for the correct input connection on the TV.Make sure you have made the correct selection for the input mode for the incoming signal.When I turn on my television, there is a few second delay before the picture appears. Is this normal?Yes, this is normal. That is the TV searching for previous setting information and initializing the TV.Picture is normal, but no sound. Check the volume settings.Check if Mute mode is set “on”.Sound but no picture or black and white picture.If black and white picture first unplug TV from AC outlet and replug after 60 seconds.Check Color Setting if picture is black and white.Sound and picture distorted or appear wavy.An electrical appliance may be affecting TV set. Turn off any appliances, if interference goes away, move appliance farther away from TV.Insert the power plug of the TV set into another power outlet.Sound and picture is blurry or cuts out momentarily.If using an external antenna, check the direction, position and connection of the antenna.Adjust the direction of your antenna or reset or fine tune the channel.Horizontal/vertical stripe on picture or picture is shaking. Check if there is interfering source nearby, such as appliance or electric tool.The plastic cabinet makes a “clicking” type of sound.“Click” sound can be caused when the room temperature changes. This change causes the television cabinet to inflate or contract, which makes the sound. This is normal and TV is OK.Black square appears in the center of my television screen?The Closed Caption function is set in the text mode. To remove it, access Closed Caption from the menu screen and change the Mode setting from text to either CC1 or off .Trouble Shooting
18SYMPTOMS POSSIBLE SOLUTIONSOn some channels getting another language or sometimes no sound at all.That would indicate that the MTS mode on your unit is set to SAP mode. We suggest setting the MTS mode to either Stereo or Mono . For further instruction, please see Audio Adjust or MTS/SAP in your user manual.SAP is Second Audio Program. It’s a second audio channel that is usually used for a second language or descriptive audio for the visually impaired.MTS stands for Multichannel Television Sound, a standard that allows the encoding of 3 channels of audio within a standard NTSC (analog) video signal to a television. A television that is able to receive MTS Stereo allows you to watch television with stereo sound.Not getting all of my cable channels on the television or I’m only getting 13 channels.Check the cable connection for an incoming signal. Make sure the signal is coming OK. Best way to confirm signal is to use another TV and/or contact your cable company.Reprogram your channels. Press [MENU] button on your TV remote control, change Input Source setting to “Cable”, then use “Auto Channels Search” to reprogram your channels.[CH V / V] don’t work when I set the Channel to Cable? They work with the Air setting?After switching to Cable, please auto program the channels. The TV will “remember” all the channels then the TV will allow you to surf the channels with [CH V/V] buttons.Remote control does not work.Confirm that TV still has power and is operational.Change the batteries in the remote control.Check if the batteries are correctly installed.Clean the front of the remote control (LED window).If using a universal remote, be sure to select the TV mode on the remote.If the remote still does not work:• Remove and reinstall the batteries correctly to reset the remote or install new batteries.• Press the Power button to turn on the TV. With a universal remote if you have reset or changed the batteries you will need to reprogram the remote for the other units.Check if there is obstruction between the remote control and the TV.TIP: If you have a digital camera / camera phone, you can aim the front of the remote at camera lenses (at this time, the camera should set on camera mode, not play mode). Observe the camera screen while pressing a button on the remote control; you should see flashing light on the screen. If there is no light observed, the remote control is not working. You need to repair or replace the remote control.Other Information
19NOTEFeatures, appearance and specifications are subject to change without notice.Model Name LHD32K20DHUSDimensionWithout StandWidth: 28.9 inches (735.3 mm)Height: 17.4 inches (441.9mm)Depth: 3.0 inches (76 mm)With StandWidth: 28.9 inches (735.3 mm)Height: 19.6 inches (497.6 mm)Depth: 7.9 inches (200 mm)WeightWithout Stand 13.2 lbs (6 kg)With Stand 14.3 lbs (6.5 kg)LCD Panel Minimum size(diagonal) 31.5 inchesScreen resolution 1366 × 768Audio power 6 W + 6 WPower consumption Please refer to the rating label.Power supply 120 V ~ 60 HzReceiving systemsAnalog NTSCDigital ATSC / QAMEnvironmental conditionsTemperature: 41°F ~ 95°F (5°C~ 35°C)Humidity: 20%-80% RHAtmospheric pressure: 86 kPa - 106 kPaComponent Input 480 I / 60 Hz, 480 P / 60 Hz, 720 P / 60 Hz, 1080 I / 60 HzVGA Input VGA (640×480 / 60 Hz), SVGA (800×600 / 60 Hz), XGA (1024×768 / 60 Hz)HDMI Input RGB / 60 Hz (640×480, 800×600, 1024×768)YUV / 60 Hz (480 I, 480 P, 720 P, 1080 I)Other InformationSpecifications

Navigation menu