Hanwha Techwin SEP1003RWN Wireless Baby Camera User Manual Part 2

Samsung Techwin Co Ltd Wireless Baby Camera Users Manual Part 2

Contents

Users Manual Part 2

8 · Viewing Mode DisplayIndicator DescriptionHow to use the indicatora b c d ef g h i jka  Signal IndicatorThe signal indicator shows the strength of the signal being received from the camera. The number of bars in the signal indicator shows the strength of the signal – One or no bars indicate the signal is poor, and 5 bars indicate a strong signal.b Digital ClockDisplays the time that is set on the monitor. It only provides AM / PM time format and no 24hour format.c  Camera NumberIndicates which camera is being displayed on the current screen. When scan mode is selected, this icon will flash. d Sound level IndicatorIndicate the sound level of the Active Camera.e  x1/x1.5/x2 Zoom modeIndicates that current screen is Zoomed in. Press [  ] icon on the monitor to zoom back out. f Night Vision IndicatorIndicates camera night vision mode is turned on. The screen will appear in Black/White in this mode.g VOX OnIndicates you select Low Sound level detection or High Sound level detection in VOX menu.h Monitor Speaker MuteIndicates the monitor speaker is muted. Once the monitor’s speaker is muted, no sound from the camera is produced. i Battery Capacity Level Indicates remaining battery charge. Indicated in 4 levels, and one discharge warning.j ChargingIndicates the battery is charging by DC input power. If battery nearly empty,  it will flash to alert user to charge up the unit.k Two-way talkPress the [   ] icon while talking.No Signal WarningsThe "Out of Range" message means the monitor cannot access the camera. Please reposition the camera, or check the camera power. VIeWInG Mode dIsplay
English · 903 Viewing Mode DisplayMenu OperationHow to use the function toolsPress the screen of the monitor to display the menu screen.b dc eaa Navigation ControlsUsing the navigation [   ] icons, you can control camera angle.b Menu SettingMenu setting mode is including monitor and camera settings.c  Monitor VolumeUsing the [   /   ] icons, you can adjust the monitor volume. d Zoom IN / Zoom Out When x1/x1.5 Zoom mode, the magnifier icon is [  ] inside, means press this icon will zoom in video image. When x2 Zoom mode, the magnifier icon is [  ] inside, means press this icon will zoom out video image.e LullabyPress the icon to turn on and turn off lullabies. How to use the setup icon설정을 완료한 후 [   ] 아이콘을 눌러 저장하세요.Live 화면으로 돌아오려면 [   ] 아이콘을 누르세요. Settingse f ga b c dSettingsa   BrightnessAdjusts the brightness of the image shown. If you are using multiple camera, you can adjust the brightness of each individual camera.Settingsb  Set Camera Speaker VolumeAdjust the volume of the speaker on the camera in this menu. The volume can be adjusted from 1 to 5, with 5 being the loudest setting and 1 being the quietest.Settingsc  Time SettingSet the time shown on the monitor. Use the [   ] or [   ] icon to change the numbers in the selected field. Settingsd Feed TimerSet the feed time shown on the monitor. Use the [   ] or [   ] icon to change the numbers in the selected field.
10 · Viewing Mode DisplaySettingse  Camera VOX SensitivityIf not in “VOX” mode, [   ] icon is not displayed.  In VOX mode, you can select “Low Sound Level Detection” or “High Sound Level Detection”. If set to “Low Sound Level Detection”, monitor can be triggered by lower audio level than “High Sound Level Detection” setting.• Audio Only Mode :Video will turn on 30 seconds and then video will turn off, monitor speaker is still playing camera background sound.• Continuous Video and Audio Mode : Video will not turn off and always streaming video all the time. When you press Power Key, Monitor will  be automatically switched  to Low Sound Level Detection mode.• Low Sound Level Detection : Small baby cry level can trigger video to turn on for 30 seconds, then back to stand-by.• High Sound Level Detection : Loud baby cry level can trigger video to turn on for 10 minutes, then back to stand-by.Settingsf   PairingYou can register a wireless camera with the monitor using the registration menu where you can view the video of the selected wireless camera.Settingsg   ResetChoose <YES> to reset the monitor to factory defaults.  All settings except for time information will be reset to the factory defaults.
English · 1104 OverviewGetting to know your Monitoring systemWireless MonitorAfter opening the box, fully charge the monitor before use. After initial charge, recharge as needed.Front Controls oVerVIeW 5” LCD ScreenDisplays video from the camera.Power LEDWhen the monitor is being recharged or monitor has low electricity, red light flashes.When the monitor is working, the LED becomes solid red light.MicrophoneTransmits audio to the camera when [  ] icon is pressed down and held like a walkie talkie.Monitor AntennaReceives and sends signals from or to the camera. Navigation ControlsViewing Mode: The following controls are used while watching live video from the camera:• Press the [  ] or [  ] icon to adjust camera’s framing upwards or downwards.• Press the [  ] or [  ] icon to adjust camera’s framing to the left or right.• Press [   ] icon to zoom in/out the screen. While in zooming, use [  ] icon to move the screen around.Menu Mode: Press the [   ] icon to confirm the menu selection.
12 · OverviewBack Controls n `You must have more than one camera configured on the system when using the functions that requires more than one camera.Power On/OffTurn on/off the wireless monitor.SpeakerProduces the sound transmitted from the camera(s).DC 5V Power InputConnect the included AC power adapter to power and/or charge the monitor battery. (when the monitor is not placed in the optional Charge cradle).Belt ClipWhen you carry the monitor, use the belt hanger to hold the monitor onto your belt.Kick StandUse to hold the monitor onto a table.
English · 1304 OverviewWireless CameraFront & Back Controls n `Remotely control Night Light ON or OFF is available only when the camera is paired to the monitor.Side & Bottom ControlsPAIR ButtonPress this button to pair with a monitor.Power Slide SwitchTurns the camera ON or OFF.Night vision sensorDetects light levels where the camera is placed.IR LEDsInfrared LED’s provide viewing in no / low light conditions.MicrophoneReceives sounds for the area near the camera, and transmits sound from the camera to the monitor.SpeakerProduces the sound transmitted from the monitor.Night Light ButtonTurns Night Light ON or OFF. When the camera is powered on, Night Light would be automatically turned on.Camera AntennaSends & receives signals to or from the monitor.DC 5V Power InputConnect the adapter to the camera.
14 · InstallationHow to InstallCAUTION: If you use the system to watch a young child, do not place the camera in the child's reach. Wireless Monitor1.  Place the monitor in a place that will have clear reception with your camera(s).2.  Pull out the stand. n `Do not pull up the stand lever with an excessive force.Wireless CameraBefore you install the camera, carefully plan where and how it will be positioned, and where you will route the cable that connects the camera to the power adapter. Before starting permanent installation, verify its performance by observing the image on the monitor when camera is positioned in the same location/position where it will be permanently installed and the monitor is placed in the location where it will be used most of the time.Installation WarningsAim the camera(s) to best optimize the viewing area: Select a location for the camera that provides a clear view of the area you want to monitor, which is free from dust, and is not in line-of-sight to a strong light source or direct sunlight.Avoid installing the camera where there are thick walls or obstructions between the camera and the monitor.STRANGULATION HAZARD - Keep cord out of child's reach. NEVER place camera or cords within 3 feet of crib or playpen. Never use extension cords with AC Adapters. Only use the AC Adapters provided.1.  Carefully unpack the camera. If you are installing cameras that did not come with the system, please see the pairing camera section of this manual for details on installation.2.  Mount the camera to the wall. Mark the position of the screw hole on the wall, and drill hole and insert 1 screw, then firmly attach the camera to the wall by placing the stand over the installed screw and pushing the base downwards. n `To install on a concrete wall, drill a hole and use plastic anchor to fix. `Use the drilling template to drill holes on the wall for camera installation. (Page 18) `The camera can also be placed on a flat surface, such as a table or shelf, and no mounting hardware is required.3.  Adjust the viewing angle of the camera. Use the Pan, tilt control from the monitor to adjust the viewing angle of the camera. n `Adjusting the camera with excessive force may damage the unit. InstallatIon
English · 15Appendix06SpecicationsItem DetailsSystem GeneralOperating Frequency Range 2400 MHz~2483.5 MHzTransmitting Power 17dBm MaxMonitor Sensitivity -88dBmType of Spread Spectrum TX FHSSType of Modulation GFSKData Rate 4MbpsTransmission range Outdoor 300 m (Eye of Sight)Wireless CameraImage Sensor Type 1/4” Color CMOS Image SensorEffective Pixel H: 1280, V: 1024Resolution  1280x720 Image Compression MPEG4White Balance AutoLens EFL=4.5mm, F=2.0Viewing Angle (Diagonal) 55 degreeIR LED Type/ Night Vision 8pcs IR LED – 940nm / 5mLullabies  4 songs (Monitor Remote On / Off)Night Light Yes (only Manual On/Off on camera head)Loud Speaker Output 0.8W, 90dB splPower Requirement DC 5V ± 10%Power Consumption 5.1Watt (max)VOX level detection High: 50dBA / Low: 60dBAItem DetailsOperating Temperature Range 0°C~+40°COperating Humidity Range 85% RHEnvironment Rating Indoor use onlyPan Angle 300°Tilt Angle 110°Regulation Compliance FCC/CERoHS Compliance Yes for CE version onlyAudio Built in Microphone/ SpeakerWeight 218gWireless MonitorDisplay Type/Size Color TFT 5”Resolution  800X480Viewing Angle 12 o'clockDigital Zoom x1, x1.5, x2Real Time Clock (RTC) +/- 2sec / dayFeed Timer Alert Yes (beep sound)Number of Camera Support Up to 4 camerasPower Requirement Adapter : DC 5V ± 10%, Battery : 3.8 Li-ionLoud Speaker Output 1W, 85dB splPower Consumption6.7 Watt (max)Operating Temperature Range 0°C~+40°COperating Humidity Range 85% RHEnvironment Rating Indoor use onlyRegulation Compliance FCC/CERoHS Compliance Yes for CE version only appendIx
16 · AppendixTroubleshootingProblem Solution No picture from a camera1.  Check all connections to the camera. Make sure the adapter is plugged in.2.  Make sure that the cameras and monitor are both ON.3.  Make sure that the camera is in range of the monitor.4.  Make sure the camera and monitor are paired.5.  Adjust the monitor antenna to vertical position.The picture is or has become choppyThe picture may become choppy when experiencing a lower frame rate  (i.e. 10 frames per second vs. a higher 20 frames per second).1.  Try moving the camera closer to the monitor.2.  Remove obstructions between the monitor and camera.3.  Adjust the monitor antenna to vertical position.No sounds (even with both units turned on)1.  Make sure that the power adapter is connected to the camera.2.  The battery on the monitor may be dead, be sure to charge it using the adapter included.3.  The monitor may be out of range of the camera; be sure to check if the Range LED in on continuously.Your BrightVIEW is emitting an high pitched noise/feedback.This sound is normal feedback which occurs if the monitor and camera are too close together. Move them further apart. n `Low batteries will cause the supply current to become unstable and will affect the quality of the video/audio. Please charge the battery fully for use for superior video.Item DetailsAudio Built in Microphone/ SpeakerOther Special Feature Volume control, PairingBattery Type Li-onBattery Capacity 2500mAh, ReplacebleBattery time duration Min 4 hoursWeight 239g (battery inside)
Correct Disposal of This Product  (Waste Electrical & Electronic Equipment)(Applicable in the European Union and other European countries with separate collection systems)This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources.Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take these items for environmentally safe recycling.  Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal.Correct disposal of batteries in this product(Applicable in the European Union and other European countries with separate battery return systems.)This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are not properly disposed of, these substances can cause harm to human health or the environment. To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle them through your local, free battery return system.Samsung cares for the environment at all product manufacturing stages, and is taking measures to provide customers with more environmentally friendly products. The Eco mark represents Samsung devotion to creating environmentally friendly products, and indicates that the product satisfies the EU RoHS Directive.
This template is used to install  the camera on the wall.TEMPLATECAMERA FRONTScrew holes for  the Camera  installation
SALES NETWORKHEAD OFFICE6, Pangyo-ro 319beon-gil, Bundang-gu, Seongnam-si, Gyeonggi-do, 463-400 Rep. of KOREATel : +82-70-7147-8753, 8764    Fax : +82-31-8018-3740www.samsungsecurity.comSAMSUNG TECHWIN AMERICA Inc.100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660 Customer support : +1-877-349-3149www.samsungsv.comSAMSUNG TECHWIN EUROPE LTD.Samsung House, 1000 Hillswood Drive, Hillswood Business Park Chertsey,  Surrey, UNITED KINGDOM KT16 OPSCustomer support : 00800-8010-8022www.samsungsecurehome.eu

Navigation menu