Hanwha Techwin DIGIMAXV800 Digital Camera User Manual v800en c V19

Samsung Techwin Co Ltd Digital Camera v800en c V19

Contents

Users Manual 2 of 3

41+/- button 98Using the Custom White BalanceWhite balance settings may vary slightly depending on the shooting environment. You canselect the most appropriate white balance setting for a given shooting environment by settingup the custom white balance.1. Select the CUSTOM ( ) menu of the White Balance. You can select CUSTOM 1 or CUSTOM 2 whitebalance. 2. Place a sheet of white paper in front of the camera sothat the LCD monitor shows only white, and then pressthe SHUTTER button.3. The value you set will be saved.- The custom white balance value will be applied, startingwith the next picture you take.- The user configured white balance will remain effectiveuntil it is overwritten.[White paper]Exposure compensation : This camera automatically adjusts the exposure according to theambient lighting conditions. You can also select the exposure value by using the +/- button.Compensating Exposure1. Press the +/- button, and then use the UP and DOWNbuttons to select the exposure compensation icon ( ).The exposure compensation menu bar will appear asshown.2. Use the LEFT and RIGHT buttons to set the desiredexposure compensation factor.3. Press the +/- button again. The value you set will besaved and the Exposure Compensation setup mode will close. If you change the exposurevalue, the exposure indicator ( ) will be displayed on the bottom of the LCD monitor.* A negative exposure compensation value reduces the exposure. Note that a positive exposure compensation value increases the exposure and the LCDmonitor will appear white or you may not get good pictures.
42You can use the ASM button to select the Aperture Value and Shutter speed in the Manual mode. AEL/ASM button The camera measures brightness of the object and automatically set the best exposurevalue. If difference between the exposure values of the object and background is too great,use the AEL button to manually set the exposure value against sunlight or in strong light. This button is available in the PROGRAM, Aperture priority(A), Shutter priority(S), MySETand MOVIE CLIP mode.Use the automatic exposure lock. 1. Ensure the subject in the centre of the autofocus frame.2. Move the camera to point the automatic focus mark on the object of desired exposure.3. Press the AEL button to lock the exposure and display the AEL icon in the bottom of theLCD.4. Focus the camera again and press the shutter button again for shooting.[ Screen for shooting ] [ Focus to the object and ]press the AEL button[ Refocus and fully press ]the shutter buttonUsing the ASM button in the M mode1. Rotate the MODE DIAL to select the M mode.2. Press the ASM button and the aperture value andshutter speed are displayed. To select the aperturevalue or shutter speed, press the ASM button. The selected item is then highlighted in red.3. Rotate the jog dial to select the aperture value andshutter speed. Press the SHUTTER button to take thepicture.In the Manual mode, the exposure information will be displayed by pressing the shutterbutton down halfway.
43MF button Use this button to select the focusing method. Automatic focusing : Slightly press the shutter to let the camera measure distance to theobject and select the best focusing. If successfully focused with the slight press of the shutter, the automaticfocusing mark is turned green.Manual focusing : Where the automatic focusing is not available, for example, in very darkconditions, use the manual focus. Please be careful when using themanual focus as the picture can be blurred easily.Focus distance of 0.04~0.25m are only supported in the Wide zoom. If you take a picturewithin 0.2m, select the Flash off mode as the flash range is 0.2m or farther.The focus value displayed in the LCD while manually focusing is measured from the endof the lensINFORMATION Long distanceClose-upManual focusing.1. Press the MF button to display the MF bar. The MF icon is displayed in the bottom of the LCD.2. Use the jog dial to set the focus distance.Turn to the left : Move the focus farther.Turn to the right : Move the focus closer.
44Using the LCD monitor to adjust the camera settingsThe following functions are available, depending on the mode you have selected.The items indicated by are default settings.You can use the menu on the LCD monitor to set up recording functions. In any mode withthe exception of VOICE RECORDING mode, pressing the MENU button displays the menuon the LCD monitor.The menu will not be displayed on the LCD monitor in the following circumstances:- When another button is being operated.- While image data is being processed. (when the green lamp next to the viewfinder blinks)- When there is no battery capacity.INFORMATIONSizeMenu tab Main menu Sub menu Camera working mode Page3264X24483072X23042816X21122592X19442272X17042048X15361600X12001024X768640X480640X480320X240160x12830 FPS15 FPSFrame Ratep.50p.49p.49
45Using the LCD monitor to adjust the camera settingsMenu tab Main menu Sub menu Camera working mode PageS.FineFineNormalMultiSpotSingleContinuousAEBAFBSoftNormalVividNormalB&WSepiaRedGreenBlueNegativeOffRange 1~4Off2~4 PartHorizontalOffFrame 1~9HistogramSave modep.51Qualityp.50MeteringShootingp.52Effectp.53Special EffectOSD Informationp.54p.55p.56Sharpnessp.53CompositePhotoFrameFull OSDBasic OSDHighlightTIFF
46Using the LCD monitor to adjust the camera settings* Menus are subject to change without prior notice.Menu tab Main menu Sub menu Camera working mode PageMyset1Myset2Myset3Myset1Myset2Myset2OffOnLoad MysetScenep.57p.57p.58p.59StabiliserSave MysetNight, Portrait, Children, Landscape, Close-up,Text, Sunset, Dawn,Backlight, Fireworks,Beach&Snow
47How to use the menu3. Use the UP and DOWN buttons to select a sub menu.4. Select a sub menu, and then press the OK button. The value you set will be saved and themenu will disappear.1. Turn on the camera and press the MENU button. A menu for each camera mode appears.However, there is no menu for Voice Recording mode ( ).2. Use the LEFT and RIGHT buttons to navigate through the menus.Press the LEFTor RIGHT button.Press the LEFTor RIGHT button.Press the UP orDOWN button.Press the UP orDOWN button.You can select the image size appropriate for your application.Mode Icon3072 2816 2592 2272 2048 1600 1024 640 640 320 160Size3072X2304 2816X2112 2592X1944 2272X1704 2048X1536 1600X1200 1024X768 640X480 640X480 320X240 160X128STILL IMAGE modeMOVIE CLIP modeThe higher the resolution, the lower the number of available shots will be because highresolution images require more memory than lower resolution images.INFORMATION SizeMeteringMultiSpot3027ShootingSingleContinuousAEBAFBEffectNormalB & WSepiaNegativeNOR[ PROGRAM mode ]Size3072X23042816X21122592X19442272X17043072[ MOVIE CLIP mode ]Size640X480320X240160X12832030FPSEffect EffectNormalB & WSepiaNegativeNormalB & WSepiaNegativeNORQualityTIFFS.FineFineNormal3072
48Quality You can select the compression ratio appropriate for yourapplication of the captured images. The higher thecompression ratio, the lower the picture quality. Mode IconTIFFSub menuTIFFS. Fine Fine Normal30FPS 15FPSFile Formattif jpeg jpeg jpeg avi aviSTILL IMAGE mode MOVIE CLIP modeTIFF is the highest quality and Normal is the lowest setting. Choose the setting appropriate for your needs.The TIFF file format is for professionals and provides the best quality. However, large file size reduces number of available pictures to take and increasessaving time to the memory card.[Please Wait !] message is displayed while saving a TIFF file to the memory card.If you select the TIFF file format, the double self-timer can’t be selected. This file format complies with the DCF(Design rule for Camera File system).JPEG (Joint Photographic Experts Group): JPEG is the image compression standarddeveloped by the Joint Photographic Experts Group. This type of compression is mostcommonly used for compressing photos and graphics because it can compress the filesefficiently without damaging the data.INFORMATION[ PROGRAM mode ]QualityTIFFS.FineFineNormal3072
49MeteringIf you cannot obtain suitable exposure conditions, you can change the metering method totake brighter pictures.Multi ( ) : Exposure will be calculated based onan average of the available light in theimage area. However, the calculation will be biasedtowards the centre of the image area.This is suitable for general use.Spot ( ) : Only the rectangular area in the centreof the LCD monitor will be metered forlight. This is suitable when the subject in the centre is exposed correctly,regardless of the back lighting. [ PROGRAM mode ]MeteringMultiSpot3072
50Continuous shotYou can select continuous shot, AEB (Auto Exposure Bracketing) and AFB (Auto FocusBracketing). If you select CONTINUOUS, AEB or AFB, the flash will automatically be set toFlash Off.[Single]: Take one picture only[Continuous]: Images will be taken continuously until theshutter button is released. The shootingcapacity depends on the memory. If less than 3 pictures are available in the memory, the Sequential and the AEB, AFBshooting are not available.If you select 3072X2304 or 2816X2112 image size, the maximum numbers of continuousshot are 3. It is best to use a triangular support for the AEB shooting for saving time is long and handshaking may occur.If the [TIFF] or [S. Fine] quality is selected and the [Shooting] sub menu is changed to[Continuous], [AEB] or [AFB], the image quality is changed to the [Fine] sub menuautomatically. The self-timer can’t be activated during the continuous shooting. INFORMATION[ PROGRAM mode ]ShootingSingleContinuousAEBAFB[AEB]: You can select the exposure bracket range(0.3EV step, 6 steps) by rotating the jog dial.Three pictures are taken in a series in differentexposure value. Use this menu if it is hard to decideexposure of the object. [AFB]: You can select the focus bracket range( 1 step, 3steps) by rotating the jog dial. Three pictures aretaken in a series in different focus range. Use thismenu if it is hard to decide distance of the object. NORShootingNORShootingNORSingleContinuousAEBAFBSingleContinuousAEBAFB
51SharpnessBy using the camera's digital processor, it is possible to add special effects to your images. Normal : No effect is added to the image.B & W : Converts the image to black and white.Sepia : Captured images will be stored in a sepia tone (a gradient of yellowish browncolours).Negative : Save the image in negative mode.Effect You can adjust the sharpness of the picture you want to take.You cannot check the sharpness effect on the LCD monitorbefore you take a picture, because this function is appliedonly when the captured image is stored on the memory.[ PROGRAM mode ]SharpnessSoftNormalVivid[ PROGRAM mode ] [ MOVIE CLIP mode ]EffectNormalB & WSepiaNegativeNORNORSub menu Icon Description VividNormalSoftThe edges of the image are softened. This effect is suitable for editing images on your PC.The edges of the image are sharp. This is suitable for printing.The edges of the image are emphasized. The edges will appearsharp, but noise may occur in the recorded image.EffectNormalB & WSepiaNegativeNOR30FPS
52Special EffectBy using the camera s digital processor, it is possible to add special effects to your images.You can select this menu only in the PROGRAM, MySET, Aperture priority, Shutter priorityand MANUAL modes.You can select this menu only in the 2592x1944, 2272x1704, 2048x1536, 1600x1200, 1024x768,640x480 image size. If the [3072X2304] or [2816X2112] image size is selected and one of thespecial effect menu is selected, the image size is changed to the [2592X1944] automatically. You can select the preset focus frame, Composite shots and Photo frame function. If a special effect is selected, the rest special functions set before are cancelled automatically.Even if the camera is turned off, the special effect setting will be preserved. To cancel thespecial effect, select the [Off] sub menu of each menu.If you select the [TIFF] image size and select the [Special Effect] menu, the image size will bechanged to the [S.Fine] image size automatically. If you select a special effect menu and select [Continuous], [AEB] or [AFB] menu, the specialeffect menu will be cancelled automatically. You can make the subject stand out from its surroundings. The subject will be sharp and infocus while making the rest out of focus.1. Select the PROGRAM, MySET, Aperture priority, Shutterpriority or MANUAL modes. Then press the menu button.2. Press the LEFT/ RIGHT button and select the [SpecialEffect] menu tab.3. Select the [Highlight] menu by pressing the UP/ DOWNbutton and press the Right button.4. Select a desired sub menu by pressing the UP/ DOWNbutton and press the OK button.- [Off] : The preset focus frame will not be added. Special Effect : Preset focus frames5. Press the menu button twice and the menu will disappear.If you select the [Range 1~3] menu, the preset focusframe area will appear.[Range 1] [Range 2] [Range 3] Special EffectHighlightCompositePhoto FrameOffOffOffNORMove : Change:
53Special Effect : Composite shots[The result image][1/2] [2/2]You can combine 2~4 different shots in a still image.1. Select the PROGRAM, MySET, Aperture priority, Shutter priority or MANUAL modes.Then press the menu button.2. Press the LEFT/ RIGHT button and select the [SpecialEffect] menu tab.3. Select the [Composite] menu by pressing the UP/ DOWNbutton and press the Right button.4. Select a desired sub menu by pressing the UP/ DOWNbutton and press the OK button.- [Off] : cancels the composite shots- [2 Parts] : 2 different shots are combined in a still image. - [3 Parts] : 3 different shots are combined in a still image.- [4 Parts] : 4 different shots are combined in a still image.5. Press the menu button twice and the menu will disappear.6. The number of frames you selected in step 4 is displayed on the LCD monitor. Press the shutter button to start the composite shots.Pressing theshutter buttonPressing theshutter buttonSelecting 2 composite shotsSpecial EffectHighLightCompositePhoto FrameOffOffOffNORMove : Change:You can use the flash button, self-timer button, macro button, voice memo button, +/-button and the Zoom W/T button during the composite shots.If you change the image size, press the camera buttons (Play mode button, Voicerecording(Pressing the UP button twice)) or rotate the mode dial during the composite shots, thecaptured images aren’t saved and the first step of the composite shot will display on the LCDmonitor. Do not press the camera buttons or rotate the mode dial during the composite shots. The voice memo will start after taking the last composite shot.INFORMATION
54Special Effect : Photo FrameYou can add 3 types of frame-like borders to a still image you want to capture.[Frame 1] [Frame 2] [Frame 3] 1. Select the PROGRAM, MySET, Aperture priority,Shutter priority or MANUAL modes. Then press themenu button.2. Press the LEFT/ RIGHT button and select the [SpecialEffect] menu tab.3. Select the [Photo Frame] menu by pressing the UP/DOWN button and press the Right button.4. Select a desired sub menu by pressing the UP/ DOWNbutton and press the OK button.- [Off] : The photo frame will not be added. 5. Press the menu button twice and the menu willdisappear. If you select the [Frame 1~3] menu, thepreset focus frame area will appear. Special EffectHighLightCompositePhoto FrameOffOffOffNORMove : Change:
55Save / Load a specific camera configuration (MySET)Use the MySET mode to save frequently used camera settings (Save Myset) and use it later(Load Myset)Saving the camera configuration : Available in the PROGRAM, A, S and M shooting mode. 1. Use the camera buttons and menu to set desired camera configuration.2. Press the menu button in any mode except AUTO,VOICE RECORDING, MOVIE CLIP, SCENE and MySETmode. 3. Press the Left/Right buttons to select the [Save Myset]menu tap.4. Press the Up/Down buttons to select desired MySET slotnumber to save.5. Press the OK button to save the current configuration inthe selected MySET slot and close the menu.Loading the saved camera configuration: available in the MySET shooting mode.1. Turn the mode dial to select the MySET shooting modeand press the menu button.2. Press the Left/Right buttons to select the [Load Myset]menu tap.3. Press the Up/Down buttons to select a MySET slotnumber to load.4. Press the OK button to set the camera configuration assaved in the MySET slot.* The current MySET slot number is displayed in the top left of the LCD.Saving is available for the following camera functions.Functions using the camera buttons - Macro, flash, white balance, ISO, RGB, Exposurevalue, Aperture value and Shutter speed. Functions using the menu screen - Size, quality, metering, effect, sharpness andcontinuous shot.INFORMATION[ PROGRAM mode ][ MySET mode ]Save MysetNORLoad Myset3072Myset 1Myset 2Myset 3Myset 1Myset 2Myset 3
56SceneSub menu Icon Description ChildrenLandscapeClose upSunsetDawnBacklightFireworkBeach&SnowSelect the [Scene] submenu to automatically configureoptimal settings, depending on the selected scene. Only available in the SCENE Mode.To take a still picture of moving children Portrait To take a picture of a personNight Use this for shooting still images at night or in other dark conditions.Close-up shooting for small objects such as plants and insectsFor taking pictures of sunsets Scenery with green woods or blue skyDaybreak scenesPortrait without shadows caused by backlightFirework scenesText Use this mode to shoot a documentFor ocean, lake, beach and snowscape scenes[SCENE mode]When the close-up, sunset, dawn, fireworks are selected, it is possible that camera shakewill occur. If this is the case, use a tripod to eliminate this.In the [Children] and [Close up] scene mode, the Continuous Automatic Focusing (CAF)function will be activated and the CAF icon is displayed at the bottom of the LCD monitor. Continuous automatic focusing : The camera keeps focusing while the object is movingeven if the shutter button is not slightly pressed. Note that using the Continuous automaticfocusing uses more battery than the Automatic focusing does.INFORMATIONSceneNightPortraitChildrenLandscape3072
57Movie Clip frame stabiliserThis function helps stabilise images captured during movie recording.You can select this menu only in the MOVIE CLIP mode. How to use this function 1. Select the MOVIE CLIP mode by rotating the mode dialand press the menu button. Select the [Stabilizer] menuand press the right button. 2. Select a desired sub menu by pressing the Up/Downbutton and press the OK button. [Off] : Movie clip frame stabilizer function becomesdisabled.[On] : Prevents camera shake during movie recording.The recording frame range will become narrower than when you select the [Off]menu. Pre-view frames may not display smoothly on the LCD monitor, but storedmovie clips have no problems. When you select the [On] sub menu, the movie clip frame range will be narrow dependingon the movie clip size. INFORMATIONStabilizerOffOnNOR
60Starting play modeTurn the camera on and select Play mode by pressing the play mode button ( ). The camera can now play back the images stored in the memory. If you have turned on the camera by pressing the POWER button, you can press the PLAYMODE button once to switch to Play mode and press it again to switch to Recording mode. You can turn the power on with the play mode button. The camera is turned on in play mode.Press the play mode button again to turn off the camera. Switch the mode dial to change toanother shooting mode while the camera is on.You can set up the PLAY mode function by using the camera buttons and LCD monitor. If you press the PLAY button to switch to Play mode, the camera lens will retract into thecamera body for protection of the lens after about 10 seconds.Playing back a still image1. Select the PLAY mode by pressing the playmode button ( ). 2. The last image stored on the memory isdisplayed on the LCD monitor.3. Select an image that you want to view bypressing the LEFT / RIGHT button.Press and hold the LEFT or RIGHT button toplay back the images quickly.Manner mode : Pressing the play mode button for more than 3 seconds changes thebuzzer and start-up sound setting to OFF, even though you may have set these to ON. Even if the camera’s power is off, you can start the play mode by pressing the play modebutton.Manner mode : Pressing the play mode button for more than 3 seconds changes thebuzzer and start-up sound setting to OFF, even though you may have set these to ON. Even if the camera’s power is off, you can start the play mode by pressing the play modebutton.Manner mode : Pressing the play mode button for more than 3 seconds changes thebuzzer and start-up sound setting to OFF.Even if the camera’s power is off, you can start the play mode by pressing the play modebutton.INFORMATION
61Starting play modePlaying back a movie clipSteps from 1-2 are the same as those to play back a still image.3. Select the recorded movie clip that you want to play backby using the LEFT/RIGHT button. If you select a movieclip, the movie clip indicator ( ) will be displayed onthe LCD monitor.4. Press the play & pause button ( ) to play back amovie clip file.- To pause a movie clip file while playing it back, pressthe play & pause button again.- Pressing the play & pause button again will cause themovie clip file will restart.- To rewind the movie clip while it is playing, press theLEFT button. To fast forward the movie clip, press theRIGHT button.- To stop playback of the movie clip, press the play &pause button, and then press the LEFT or RIGHT button.How to capture the movie clipSteps 1-2 are the same as those for playing back a stillimage.3. Select the recorded movie clip that you want to playback by using the LEFT/RIGHT button.4. Press the Play/Pause button to play the movie clip5. Press the Play/Pause button while playing the movieclip. Then press the Shutter button.6. The paused movie clip is saved in a new file name.* The captured movie clip file has same size as the originalmovie clip (640X480, 320X240, 160X128).Movie clip capture function: capture still images from the movie clip.[ Paused ][ Press the shutter button ]9PLAYREW FFTrim:T Capture:SH
62Starting play modeOn camera movie trimming : You can extract desired frames of movie clip during the movieclip play back. 1. Select a desired movie clip in the play mode. 2. Play back the movie clip by pressing the Play &Pause button.3. Press the Pause button at the point of the movie clipthat you want to start extracting. 4. Press the T button. The start point doesn't display onthe status bar, but the start point will be selected.5. Press the Play button and the extracted range will bedisplayed on the status bar. 6. At the point of movie clip that you want to stopextracting, press the Pause button.7. Press the T button and a confirmation window willdisplay.8. Select a desired sub menu by pressing the UP/DOWN button and press the OK button.[Trimming] : The extracted frames are saved as anew file name. [Cancel] : The movie trimming will cancel. If the running time is under 10 seconds, the movie clip can t be trimmed.If you want to extract the movie clip at the beginning of the frame, press the Zoom Tbutton before starting the movie clip. If the time line bar passes by the start point by pressing the REW(Left) button, the firstframe of the movie clip will display. If you doesn t specify the ending point of the movie clip, the trimming confirmationwindow will display at the point of the last frame.INFORMATION 9PLAYREW FFTrim:T Capture:SH9PLAYREW FFTrim:T 9PLAYREW FFTrimming?TrimmingCancelConfirm : OK
63Starting play modePlaying back a recorded voiceSteps from 1-2 are the same as those to play back a stillimage.3. Select the recorded voice that you want to play back byusing the LEFT/RIGHT button. If you select a recordedvoice file, the voice indicator ( ) will be displayed onthe LCD monitor.4. Press the play & pause button ( ) to play back arecorded voice file.- To pause a recorded voice file, while playing it back,press the play & pause button again.- To resume playback of the voice file, press the play & pause button.- To rewind the voice file while it is playing, press the LEFT button. To fast forward the voice file, press the RIGHT button.- To stop playback of the voice file, press the play & pause button, and then press theLEFT or RIGHT button.8PLAY
64LCD monitor indicator■The LCD monitor displays shooting information about the displayed image.No. Description Icon Page1Battery2Play mode icon3Flash4Voice memo5Protect6DPOF icon7Histogram8Recording date2005/08/019Exposure ValueEV 0.010ISOAUTO 50 100 200 400 11Shutter speed15 ~ 1/2,00012Aperture ValueF2.8 ~ F5.113Sharpness14TIFF15Image size16Folder name & File name100-0009②③④⑤⑥⑦①⑧⑪⑩⑨⑬⑫⑭⑯⑮
65Using the camera buttons to adjust the cameraIn Play mode, you can use the buttons on the camera to conveniently set up the Play modefunctions.Image enlargement1. Select an image that you want to enlarge and press the enlargement button.2. Different parts of the image can be viewed by pressingthe 5 function button.3. Pressing the thumbnail button will zoom back to theoriginal full sized image.- You can tell whether the image displayed is anenlarged view by checking the image enlargementindicator shown at the bottom left of the LCD monitor.(If the image is not an enlarged view, the indicator willnot be displayed.) You can also check the area ofenlargement.- TIFF, Movie clips and WAV files can’t be enlarged.- If an image is enlarged, a loss of quality may occur.Thumbnail ( ) / Enlargement ( ) button You can view multiple pictures, enlarge a selected picture, and crop and save a selected areaof an image.Thumbnail display1. While an image is displayed full screen, press thethumbnail button.2. The thumbnail display will highlight the image that hadbeen showing at the time the thumbnail mode wasselected.3. Press the 5 function button to move to a desired image.4. To view an image separately, press the enlargementbutton ( ).100-0009 [ Normal display mode ] [ Thumbnail display mode ]Pressing the thumbnail button ( )Pressing the enlargementbutton ( )Highlighted image
66Thumbnail( ) / Enlargement( ) button The maximum enlargement rate in proportion to the image size.Trimming : You can extract part of the image that you wantand save it separately.1. Select an image that you want to enlarge and press theenlargement button.2. Different parts of the image can be viewed by pressingthe 5 function button.3. Press the MENU button and a message will bedisplayed as shown alongside.4. Select a desired sub menu by pressing the UP/ DOWN button and press the OK button.- [Trimming] : The trimmed image will save as a new file name, and display on the LCDmonitor.- [Cancel] : The trimming menu will disappear.* If there is little memory space to save the trimmed image, the image can’t be trimmed.Voice ( ) memo / Up buttonWhen the menu is displayed on the LCD monitor, pressing the UP button makes the menucursor move up. When the menu is not displayed on the LCD monitor, the UP button operates as the voicememo button. You can add your voice to a stored still image.Adding a Voice Memo to a Still Image1. Press the LEFT/ RIGHT button to select an image thatyou wish to add sound to.2. Press the voice memo button ( ) and the voice memoindicator will display. The camera is now ready to recorda voice memo.Trimming?TrimmingCancelConfirm:OKSTART:SHUTTERImage size 3264 3072 2816 2592 2272 2048 1600 1024 640Maximum enlargement rateX12.75 X12.0 X11.0×10.13×8.8 ×8.0 ×6.25 ×4.0 ×2.5
67Voice ( ) memo / Up button3. Press the shutter button to start recording and voice willbe recorded to the still image for 10 seconds. While the voice is recording, the recording statuswindow will be displayed as shown alongside.4. The recording can be stopped by pressing the shutterbutton again.5. The ( ) icon will be displayed on the LCD monitorafter voice memo recording has finished. - Voice memos can’t be recorded onto movie clip files.- A distance of 40cm between you and the camera(microphone) is the best distance to record sound.- The voice memo will be saved in *.wav format, but hasthe same file name as the still image to which itcorresponds.- If you add a new voice memo to the still image thatalready has a voice memo, the existing voice memo will be erased.Play & Pause ( )/ Down buttonIn Play mode, the play & pause/ down button works as follows:- If the menu is displayedPress the DOWN button to move from the main menu to a sub menu, or to move down thesub menu cursor.- If a still image with a voice memo, a voice file, or a movie clip is playingIn Stop mode : Plays a still image with a voice memo, a voice file, or a movie clip.During playback : Temporarily stops playback.In Pause mode : Resumes playback100-0011 STOP:SHUTTER100-0011 [ Voice recording is stopped ] [ Voice recording is paused ][ Voice recording is playing ]100-0008 100-0008 PLAYPAUSEPLAY
68LEFT/ RIGHT/ MENU/ OK buttonLEFT / RIGHT/ MENU/ OK buttons activate the following.- LEFT button : While the menu is showing, press the LEFT button to select the menutab to the left of the cursor.- RIGHT button : While the menu is showing, press the RIGHT button to select the menutab to the right of the cursor, or to move an secondary menu.- MENU button : When you press the MENU button, the play mode menu will bedisplayed on the LCD monitor. Pressing it again will return the LCD tothe initial display.- OK button : When the menu is displayed on the LCD monitor, the OK button is usedfor confirming data that is changed by using the 5 function button.Voice ( ) memo/ Up button■When the camera is connected to a PictBridge Printerwith supplied USB cable, currently displayed image willbe printed with the printer's default setting by pressingthis button. -Refer to page 00 for more information about how toconnect the computer and the printer.
69Deleting Images in Play Mode1. Select an image that you want to delete by pressing theLEFT / RIGHT button and press the DELETE ( )button.2. A message will display as shown alongside on the LCDmonitor.3. Select the submenu values by pressing the UP/DOWNbutton and then press the OK button.If [Delete] is selected: deletes the selected images.If [Cancel] is selected: cancels "Delete Image".Delete ( ) buttonThis deletes images stored on the memory card.Before deleting images from the camera, you should protect (p.77) or download images (p.121) to your computer that you wish to keep.INFORMATION Deleting Images in Thumbnail Display Mode1. Use the Up/Down/Left/Right buttons to select an image to delete.2. Press the Delete button to display the following message in the LCD monitor.3. Select the submenu values by pressing the UP/DOWN button and then press the OKbutton.If [Delete] is selected: deletes the selected images.If [Cancel] is selected: cancels "Delete Image".100-0009 Delete?DeleteCancelConfirm:OKPress theDELETEbutton.1 2 34 5 67 8 91 2 34 5 67 8 9Delete?DeleteCancelConfirm:OK
70Album button (MF button)You can organise the captured still images(except for theTIFF file type image) into albums by using the MF button.This camera has 8 albums and each album can take upto 100 images. The album menu loading time depends on the memorycard type.How to use the albumSelecting the album1. In the play mode, press the MF button.2. Select the [Select] menu by pressing the Up/Downbutton and press the Right button. 3. Select a desired album by pressing theUp/Down/Left/Right buttons and press the OK button. Inserting still images into the album1. Select an album.2. Select the [Add] menu by pressing the Up/Downbutton and press the Right button.All A1 A2A3 A4 A5A6 A7 A8SelectSlideAddRemoveExit:MENU Move : All A1 A2A3 A4 A5A6 A7 A8SelectSlideAddRemoveSet : OK A4SelectSlideAddRemoveSelect:T Set:OK
71Album button (MF button)Removing still images from the album1. Select an album.2. Select the [Remove] menu by pressing the Up/Downbutton and press the Right button. 3. Select a desired sub menu and press the OK button. - [Select] : Specific still images in the album can beremoved.- [All] : All of the still images in the album will beremoved. If [Select] is selected : - Select images that you want to remove by pressing theUp/Down/Left/Right buttons and press the Zoom Tbutton. marks are displayed on the selected images. 4. Press the OK button and a confirmation window willdisplay.Select a desired sub menu by pressing the UP/ DOWNbutton and press the OK button.[Remove] : Removes the selected images from thealbum.[Cancel] : Cancels the removing images.* The removed images are not deleted from the memory,but just removed from the album. A4Select:T Set:OKA4A4Select:T Set:OKA4A4SelectSlideAddRemoveSet : OKRemove?RemoveCancelConfirm:OKSelectAllSelect:T Set:OKSelect:T Set:OKSelectSlideAddRemoveSelectSlideAddRemoveAdd?AddCancelConfirm:OK3. Select the still images you wish to add by pressing theUp/Down/Left/Right buttons and press the Zoom Tbutton. marks are displayed on the selected images. * To cancel the selection, press the Zoom T button again. 4. Press the OK button and a confirmation window willdisplay. Select a desired sub menu by pressing the UP/DOWN button and press the OK button.[Add] : Inserts the selected images into the album. [Cancel] : Cancels the inserting images.
72Album button (MF button)If an image is deleted from the memory, the image doesn’t display on an album. An image can’t be added twice into the same album. An image can be added into the different albums. INFORMATIONPlaying back the albumsPlaying back all of the albums1. Select [All] menu and press the OK button. All of the albums will be selected. 2. Select the [Slide] menu by pressing the Up/Down buttonand press the Right button. You can select [Start], [Interval], [Repeat] and [Effect]menus. - [Start] : Start the slide show- [Interval] : Set the slide show play interval- [Repeat] : Choose to repeat the slide show afterfinishing the first cycle.- [Effect] : Unique screen effects can be used for theslide show.3. Select the [Start] menu by pressing the Up/Down buttonand press the OK button to start the slide show. 4. To stop the slide show, Press the Play & Pause buttnand MENU/OK button.Playing a desired album1. Select a desired album and press the OK button. 2. Select the [Slide] menu by pressing the Up/Down buttonand press the Right button. You can Select the [Start], [Interval], [Repeat] and[Effect] menu.3. Select the [Start] menu and press the OK button to startthe slide show. 4. To stop the slide show, press the Play & Pause buttnand MENU/OK button.All A1 A2A3 A4 A5A6 A7 A8SelectSlideAddRemoveExit:MENU Move : SelectSlideAddRemoveStartIntervalRepeatEffect1 SecOffCancelMove: Set:OKA4SelectSlideAddRemoveMove : Set:OKAll A1 A2A3 A4 A5A6 A7 A8A4SelectSlideAddRemoveExit:MENU Move: StartIntervalRepeatEffect1 SecOffCancel
73Setting up the play back function using the LCD monitorPLAY mode functions can be changed by using the LCD monitor. In the PLAY mode,pressing the MENU button displays the menu on the LCD monitor. The menus you can setup in Play mode are as follows. To capture an image after setting up the play menu, pressthe PLAY mode button or shutter button.Menu tab Main menu Sub menu Secondary menu PageStart -Interval 1, 3, 5, 10secRepeat Off, On p.78CancelEffect 1~4, MixSelectAllSelect-All-3072 X 2304 -2816 X 2112 -2592 X 1944 -2272 X 1704 -2048 X 1536 -1600 X 1200 -1024 X 768 -640 X 480 -User Image-B&W RedEffect Sepia Greenp.83Negative BlueRight 90º-Left 90º-Rotate 180º-p.84Horizontal-Vertical-p.80p.81p.82Protect Unlock/ LockDeleteResizeSlide ShowEffect
74Setting up the play back function using the LCD monitorThis menu is available while the camera is connected to a PictBridge supporting printer(direct connection to the camera, sold separately) with a USB cable.Copy To CardMenu tab Main menu Sub menu Secondary menu PageStandard Select/ All/ CancelDPOF Index No/ Yesp.84Size Select/ All/ CancelNo-Yes-Full OSDImage InformationNoneSave Modep.87Menu tab Main menu Sub menu Secondary menu PageOne Pic-All Pics-No-Yes-AutoPostcardCard4X6L2LLetterA4A3Auto SetCustom SetImagesPaper Sizep.89p.90OSD Information
75Setting up the play back function using the LCD monitorMenus are subject to change without prior notice.Menu tab Main menu Sub menu Secondary menu PageAutoFull1248916IndexAutoNormalPhotoFastphotoAutoDraftPlainFineAuto Date OffOnAuto File name OffOnStandard-Index- No-Yes-No-Yes-PrintCustom SetLayoutp.91p.91p.92p.90p.90DPOF PrintResetQualityPaper Type
76Starting the slide showImages can be displayed continuously at pre-set intervals. You can view the slide show byconnecting the camera to an external monitor.1. Press the play mode button and press the menu button.2. Press the LEFT/ RIGHT button and select the [Slide]menu tab.Start the slide show: The slide show can start only in the[Start] menu.1. Use the Up/Down buttons to select the [Start] menu.2. Press the OK button to start the slide show.- Press the Pause button to pause the slide show.-Press the Pause button ( ) again to resume the slide show.- To stop the slide show, press the play & pause button, and then press the LEFT or RIGHTbutton.Setting play interval: Set the slide show play interval.1. Select the [Interval] sub menu by pressing the UP/DOWN button and press the RIGHTbutton.2. Use the Up/Down buttons to select the desired interval.3. Press the OK button to save the configuration.Repeat setting : setting the slide show to repeat after the first cycle.1. Use the Up/Down buttons to select the [Repeat] menu and press the Right button.2. Use the Up/Down buttons to select the desired sub menu.[On] selected : The silde show is repeated until cancelled.[Off] Selected : The slide show is closed after one cycle.3. Press the OK button to save the configuration.The loading time depends on the image size and quality.While the slide show is playing, only the first frame of a MOVIE file is displayed.INFORMATIONExit: MENU Move : StartInterval 1 secRepeat OFFSlide
77Starting the slide showProtecting imagesConfigure slide show effects: Unique screen effects can be used for the slide show.1. Select the [Effect] sub menu by pressing the UP/ DOWNbutton and press the RIGHT button.2. Use the Up/Down Button to select the type of effect.[Cancel] : Normal display.[Effect 1] : Image is displayed slowly.[Effect 2] : Image is displayed slowly from the centreoutwards.[Effect 3] : Image moves from the top left.[Effect 4] : The image slides diagonally from top left to bottom right.3. Press the OK button to confirm the setting.This is used to protect specific shots from being accidentally erased (Lock).It also unprotects images that have been previously protected (Unlock).Protecting Images1. Press the play mode button and press the menu button.2. Press the LEFT/ RIGHT button and select the [Protect]menu tab.3. Select a desired sub menu by pressing the UP/ DOWNbutton and press the OK button.[Select] : Selection window for an image to beprotected/released is displayed.- Up/Down/Left/Right : Select an image- Zoom W/T Button : Protect/release the image- Menu Button : Your changes will be saved and themenu will disappear.[All Pics] : Protect/release all saved images- Zoom W/T Button : Protect/release the images- Menu Button : Your changes will be saved and themenu will disappear.SET:OKWUnlock TSET:OKWLock TBack: Set : OKSlideInterval CancelRepeat Effect1Effect Effect2Exit: MENU Move : SelectAll PicsProtect
78Protecting images- If you protect an image, the protect icon will be displayedon the LCD monitor. (An unprotected image has noindicator)- An image in LOCK mode will be protected from thedelete function or [Delete] functions, but will NOT beprotected from the [Format] function.Deleting imagesOf all the files stored in the memory card, the unprotected files in the DCIM subfolder will bedeleted. Remember that this will permanently delete unprotected images. Important shots should be stored on a computer before deletion takes place. The startupimage is stored in the camera's internal memory (i.e., not on the memory card) and it will notbe deleted even if you delete all files on the memory card.Deleting images1. Press the play mode button and press the menu button.2. Press the LEFT/ RIGHT button and select the [Delete]menu tab.3. Select a desired sub menu by pressing the UP/ DOWNbutton and press the OK button.[Select]: Selection window for an image to delete isdisplayed.- Up/Down/Left/Right: Select an image- Zoom T Button: Select the image for deletion.( mark)- OK Button: Press the OK Button to display theconfirmation message. Select the [Delete]menu and press the OK Button again todelete marked images.[All Pics] : Displays confirmation window. Select the[Delete] menu and press the OK button todelete all unprotected images. If there are noprotected images, a [No Image!] message willdisplay.4. After deletion, the screen will be changed to the playmode screen.Del:OKSelect:TDel:OKDelete?DeleteCancelConfirm:OKExit: MENU Move : SelectAll PicsDelete
79ResizeChange the resolution (size) of pictures taken. Select the [User Image] to save an image tobe the start-up image. The resized image will have a new file name.1. Press the play mode button and press the menu button.2. Press the LEFT/ RIGHT button and select the [Resize]menu tab.3. Select a desired sub menu by pressing the UP/ DOWNbutton and press the OK button.A large sized image can be resized to a smaller sized image, but not vice versa.Only JPEG images can be resized. TIFF, Movie clip(AVI) and Voice recording(WAV) files can’t be resized.You can change the resolution of only those files compressed in the JPEG 4:2:2 format.The resized image will have a new file name. The [User Image] image is stored not on thememory card but on the internal memory.Only two [User Image] images can be saved. If you save a new [User Image] image, theexisting startup image will be deleted in order.If the memory capacity is insufficient to store the resized image, a [Card Full!] messagewill display on the LCD monitor and the resized image will not be stored.INFORMATIONExit: MENU Move : 2816X21122592X19442272X1704Resize8M O O O O O O O O O7M X O O O O O O O O6M X X O O O O O O O5M X X X O O O O O O4M X X X X O O O O O3M X X X X X O O O O2M X X X X X X O O O1M X X X X X X X O OVGA X X X X X X X O O●Image Resize TypesResize 3072X2304 2816X21122592X19442272X17042048X15361600X1200 1024X768640X480UserImage
80Rotating an imageYou can rotate the stored images by various degrees. Once the playback of the rotated picture is finished, it will switch back to the original state.1. Press the play mode button and press the menu button.2. Press the LEFT/ RIGHT button and select the [Rotate]menu tab.3. Select a desired sub menu by pressing the UP/ DOWNbutton.4. Press the OK button and the rotated image will bedisplayed. If you display the rotated image on the LCDmonitor, empty spaces may appear to the left and right of the image.[Right 90 ] : Rotate picture ina clock-wisedirection[Left 90 ] : Rotate picture in acounter clock-wise direction[180 ] : Rotate picture 180degrees[Horizontal] : Rotate picturehorizontally[Vertical] : Rotate pictureverticallyExit: MENU Move : Right 90˚Left 90˚180˚Rotate
81DPOF : STANDARDThis function allows you to embed print quantity information on a stored image.1. Press the play mode button and press the menu button.2. Press the LEFT/ RIGHT button and select the [DPOF]menu tab.3. Select the [Standard] menu by pressing the UP/ DOWNbutton and press the RIGHT button.4. Select a desired sub menu by pressing the UP/ DOWNbutton and press the OK button.[Select]: Selection window for an image to print isdisplayed.- Up/Down/Left/Right: Select an image to print.- Zoom W/T Button: Select the number of prints.[All Pics] : Configure number of prints for all picturesexcept movie and voice files.- Zoom W/T Button: Select the number of prints.[Cancel] : Cancel the print setup.5. Press the OK button to confirm the setting. If an imagecarries DPOF instructions, the DPOF indicator ( )will show.DPOFDPOF(Digital Print Order Format) allows you to embed printing information on your memorycard’s MISC folder. Select the pictures to be printed and how many prints to make.The DPOF indicator will display on the LCD monitor when an image that has DPOFinformation plays back. Images can then be printed on DPOF printers, or at an increasingnumber of photo labs.This function is not available for Movie clips and Voice recording files.Set:OKW 0 Prints TSet:OKW0 Prints TExit: MENU Move : Standard SelectIndex NoSize SelectDPOF
82DPOF : INDEXImages (except for movie clips and voice file) are printed as index type.1. Press the play mode button and press the menu button.2. Press the LEFT/ RIGHT button and select the [DPOF]menu tab.3. Select the [Index] menu by pressing the UP/ DOWNbutton and press the RIGHT button.4. Select a desired sub menu by pressing the UP/ DOWNbutton.If [No] is selected : Cancel the index print setting.If [Yes] is selected : The image will be printed in index format.5. Press the OK button to confirm the setting.DPOF : PRINT SIZEYou can specify the print size when printing images stored on the memory card.The [Size] menu is available only for DPOF 1.1 compatible printers.Setting the Print Size1. Press the play mode button and press the menu button.2. Press the LEFT/ RIGHT button and select the [DPOF]menu tab.3. Select the [Size] menu by pressing the UP/ DOWN buttonand press the RIGHT button.4. Select a desired sub menu by pressing the UP/ DOWNbutton and press the OK button.[Select] : Selection window for an image to be changedprinted size is displayed.- Up/Down/Left/Right : Select an image.- Zoom W/T Button : Change the print size.- OK button : Your changes will be saved and the menuwill disappear.[All Pics] : Change print size of all saved images- Zoom W/T button : Change the print size- OK button : Confirm the changed setting. [Cancel] : Cancel all of the print size settings.* DPOF [Size] secondary menu : Cancel, 3X5, 4X6, 5X7,8X10Back: Set : OKDPOFStandardIndex NoSize YesBack: Set : OKDPOFStandard SelectIndex All PicsSize CancelSet:OKW Cancel TSet:OKW Cancel T

Navigation menu