Hanwha Techwin DIGIMAXV70 Digital Camera User Manual v70en 02 v03

Samsung Techwin Co Ltd Digital Camera v70en 02 v03

Contents

Users Manual 2 of 3

38MENU/ OK button If the menu is displayed, use the 5-Function buttons to change the data values and for yourchanges to be acceptedIf the menu is not displayed, press the MENU/OK button to display a menu for the currentcamera mode on the LCD monitor. Press the button again to return to the previous state.- There is no menu for VOICE RECORDING mode.- The menu screen may not show on the LCD when another button is pressed or image datais being processed. (The green lamp next to the view finder blinks)- When the menu is showing on the LCD monitor, it is not possible to operate the shutterbutton i.e. capture an image. To capture an image, simply cancel the menu display bypressing the MENU button.[ Menu on ][ Menu off ]Pressing the MENUbuttonS button You can use the S button to adjust the values for the exposure compensation, white balance,ISO, RGB, A/S/M mode and longtime shutter.Main menu Sub menu Available camera modeExposure compensationWHITE BALANCEISO-2.0 ~ 0.0 ~ +2.0(0.5EV steps)AUTO, DAYLIGHT, CLOUDY,FLUORESCENT H, FLUORESCENT L,TUNGSTEN, CUSTOM.AUTO, 50, 100, 200, 400SIZE3072X2304       30722816X2112       28162592X1944       25922272X1704       22722048X1536       2048
39S button Main menu Sub menu Available camera modeA (Aperture priority mode) S (Shutter priority mode) M (Manual mode)Shutter speed, Aperture value(Changed by zoom scale)A/S/M modeLTRGB R(Red), G(Green), B(Blue)Compensating Exposure1. Press the S button, and then use the UP and DOWNbuttons to select the exposure compensation icon (       ).The exposure compensation menu bar will appear asshown.2. Use the LEFT and RIGHT buttons to set the desiredexposure compensation factor.3. Press the OK button. The value you set will be saved and the ExposureCompensation setup mode will close. If you change the exposure value, the exposure indicator (        ) will be displayed on thebottom of the LCD monitor.* A negative exposure compensation value reduces the exposure. Note that a positive exposure compensation value increases the exposure and the LCDmonitor will appear white or you may not get good pictures.Exposure compensation : This camera automatically adjusts the exposure according to theambient lighting conditions. You can also select the exposure valueby using the S button.
40S button Selecting a White Balance1. Press the S button, and then use the UP and DOWNbuttons to select the white balance icon (           ). The white balance menu bar will appear as shown.2. Use the LEFT and RIGHT buttons to set the whitebalance to the desired value. The value you set will bedisplayed on the LCD monitor.AUTO  : The camera automaticallyselects the appropriate whitebalance settings, depending on the prevailing lighting conditions.DAYLIGHT  : For taking images outside.CLOUDY  : For taking images under a cloudy and overcast sky.Fluorescent H  : For shooting under daylight fluorescent types of three-wayfluorescent lighting.Fluorescent L  : Shooting under white fluorescent lighting.TUNGSTEN  : For shooting under tungsten (standard light bulb) lighting.CUSTOM  : Allows the user to set the white balance according to the shootingcondition.Different lighting conditions may cause a colour cast on your images.3. Press the OK button. The value you set will be saved and White Balance setup mode will end.White balance : The white balance control allows you to adjust the colours to appear morenatural looking.Using the Custom White BalanceWhite balance settings may vary slightly depending on the shooting environment. You can select the most appropriate white balance setting for a given shooting environmentby setting up the custom white balance.1. Select the CUSTOM(        ) menu of the White Balance.2. Place a sheet of white paper in front of the camera sothat the LCD monitor shows only white, and then pressthe shutter button.3. Press the OK button and your custom white balancevalue is stored.- The custom white balance value will be applied,starting with the next picture you take.- The user configured white balance will remain effectiveuntil it is overwritten.[ White paper ]MEASURE:SHUTTER
41S button Selecting an ISO Sensitivity1. Press the S button, and then use the UP and DOWNbuttons to select the ISO icon (        ). The ISO menu bar will appear as shown.2. Use the LEFT and RIGHT buttons to select the desiredISO sensitivity value.- AUTO  : The camera's sensitivity isautomatically changed byvariables such as lighting value orsubject brightness.- 50, 100, 200, 400 : You can increase the shutter speed while the same amount of light ispresent, by increasing the ISO sensitivity. However, the image may be saturated in high luminance.The higher the ISO value, the higher the camera’s sensitivity to light is and therefore thegreater its capacity to take pictures in dark conditions. However, the noise level in theimage will increase as the ISO value increases, making the image appear coarse.3. When you press the OK button, the value you set will be saved and ISO setup mode will end.ISO : You can select the ISO sensitivity when taking pictures.The speed or specific light-sensitivity of a camera is rated by ISO numbers.RGB : Allows the user to adjust the R (Red), G (Green), and B (Blue) values of the images tobe captured.Setting RGB Values1. Press the S button, and then use the UP and DOWNbuttons to select the RGB icon ( RGB ). The RGB menubar will appear as shown.2. Use the UP/ DOWN/ LEFT and RIGHT buttons to selectthe desired RGB value.- Up/ Down Button : Navigates between R, G, and Bicons.- Left/ Right Button : Changes value of each icon.3. When you press the OK button, the value you set will be saved and RGB setup mode willend.
42S button A/S/M : The user can manually set shutter speed or aperture value in the menu.Selecting the A/S/M shooting mode.1. Turn the mode dial to select the ASM shooting mode.2. Press the S button and use the Up and Down buttons toselect the A/S/M shooting mode icon ( ASM ) to openthe A/S/M shooting mode menu as shown in the picture.3. Press the Left and Right buttons to select desired optionfor the A/S/M shooting mode and press the S button.- A (Aperture priority) shooting mode : Set the aperture value for automatic exposuredepends on the brightness of the object by automatic shutter speed setting in thecamera. Turn the jog dial to the left or right to change the aperture value.- S (Shutter priority) shooting mode : Set the shutter speed for automatic exposure depends on the brightness of the object byautomatic aperture value setting in the camera. Turn the jog dial to the left or right to change the shutter speed.- M (Manual) shooting mode : The user can manually set both the aperture value and the shutter speed. Press the AEL button to select shutter speed or aperture value. Rotate the jog dial to change the values. If the set aperture value or shutter speed is out ofsupported range(Between  2.0), the deviation ofexposure value is displayed red in the LCD by pressing theshutter button down half way. * Please adjust the shutter speed so that the red warningmessage becomes white.
43S button Aperture values and shutter speeds that can be selected for each zoom position are asfollows :- Aperture range : AUTO, WIDE : F2.7 ~ F6.7, TELE : F4.9 ~ F11.0- Shutter speed range : AUTO, 1/2,000 ~ 15SLong Time shutter : This camera automatically adjusts the shutter speed and aperture valuesto the shooting environment. However, in NIGHT SCENE mode, you canset the shutter speed and aperture values to your preference.Adjusting the shutter speed and aperture values1. Select the NIGHT SCENE mode by rotating the modedial.2. Press S button and Long Time shutter menu (LT, Forselecting shutter speed and aperture value) will bedisplayed.3. Configure the Long Time shutter value with the up/down/ left/ right button.Up/ Down Button : Select the Aperture value / shutter speed.Left/ Right Button : Change the value. Available aperture value options, depending onzoom step will be displayed on the menu.4. Press the OK button. The value you set will be saved and the mode will switch to NIGHTSCENE mode. Press the SHUTTER button to take the picture.(Press left button)Aperture Value SmallLarge(Press right button)Shutter SpeedFast(Press left button)Slow(Press right button)F 2.71/60
44Use this button to select the focusing method. Repeatedly press the MF button to rotate [Manualfocusing]  [Continuous automatic focusing]  [Automatic focusing].Automatic focusing  : Slightly press the shutter to let the camera measuredistance to the object and select the best focusing. If successfully focused with the slight press of the shutter,the automatic focusing mark is turned green.Manual focusing  : Where the automatic focusing is not available such as verydark place, use the manual focusing. Picture may becomeblurring. Please be careful while using the manual focusing. Continuous automatic focusing  : The camera keeps focusing while the object is moving evenif the shutter button is not slightly pressed. Note that using the Continuous automatic focusing usesmore battery than the Automatic focusing does. MF button Focus distance of 0.04~0.3m are only supported in the Wide zoom. The flash is fixed as not available.The focus value displayed in the LCD while manually focusing is measured from theend of the lensINFORMATION Modes where the Continuous automatic focusing isavailable: Program, A/S/M mode, Children mode in the sceneshooting modes, and MySET mode. If selected, the CAFicon is displayed in the bottom of the LCD.mcmLong distanceClose-upManual focusing.1. Press the MF button to display the MF bar. The MF icon is displayed in the bottom of the LCD.2. Use the jog dial to set the focus distance.Turn to the left  : Move the focus farther.Turn to the right  : Move the focus closer.
45LCD buttonThe camera measures brightness of the object and automatically set the best exposurevalue. If difference between the exposure values of the object and background is too great,use the AEL button to manually set the exposure value against sunlight or in strong light. This button is available in the AUTO, PROGRAM, MOVIE CLIP, SCENE mode.Use the automatic exposure lock. 1. Ensure the subject in the center of the autofocus frame.2. Move the camera to point the automatic focus mark on the object of desired exposure.3. Press the AEL button to lock the exposure and display the AEL icon in the bottom of theLCD.4. Focus the camera again and press the shutter button again for shooting.- The automatic exposure lock function is automatically unset after taking one picture.[Image & full information ][Image & basic information ] [ LCD off ]You can check the recording status in the LCD monitor.In any mode with the exception of VOICE RECORDING mode,pressing the LCD button will change the display as shown below.If the background image is too bright to view the menus, press the LCD button and thebackground image turn to black to view clear menus.If the LCD monitor is turned off, the mode dial lamp will light up.Pressing theLCD button Pressing theLCD buttonPressing the LCD buttonAEL button (Automatic Exposure Lock)[ Screen for shooting ] [ Focus to the object and ]press the AEL button[ Refocus and fully press ]the shutter button
46Using the LCD monitor to adjust the camera settingsYou can use the menu on the LCD monitor to set up recording functions. In any mode withthe exception of VOICE RECORDING mode, pressing the MENU button displays the menuon the LCD monitor.The following functions are available, depending on the mode you have selected.The items indicated by  are default settings.The menu will not be displayed on the LCD monitor in the following circumstances:- When another button is being operated.- While image data is being processed. (when the green lamp next to the viewfinder blinks)- When there is no battery capacity.When the menu is showing on the LCD monitor, it is not possible to operate the shutterbutton i.e. capture an image.To capture an image, simply cancel the menu display by pressing the MENU button.INFORMATIONSIZEFRAME RATEQUALITYp.48p.48p.49p.49Menu tab Main menu Sub menuCamera working modePage 3072X23042816X21122592X19442272X17042048X1536 1600X1200 1024X768 640X480640X480320X24030FPS15FPSTIFFS.FINEFINENORMAL
47Using the LCD monitor to adjust the camera settingsMenu tab Main menu Sub menuCamera working modePage MULTISPOTNORMALB & W SEPIANEGATIVESOFTNORMALVIVIDSINGLECONTINUOS  AEBMYSET1MYSET2MYSET3MYSET1MYSET2MYSET3EFFECTSHARPNESSSHOOTINGLOADSCENESAVEp.50p.51p.51p.52p.52p.53PORTRAIT CHILDRENLANDSCAPE CLOSE UPSUNSET DAWNBACKLIGHT FIREWORKSBEACH&SNOW TEXTMETERINGp.50* Menus are subject to change without prior notice.
48How to use the menu3. Use the UP and DOWN buttons to select a sub menu.4. Select a sub menu, and then press the OK button. The value you set will be saved and themenu will disappear.1. Turn on the camera and press the MENU button. A menu for each camera mode appears.However, there is no menu for Voice Recording mode (        ).2. Use the LEFT and RIGHT buttons to navigate through the menus.Press the UPor DOWNbutton.Press the UPor DOWNbutton.Press theLEFT orRIGHT button.Press theLEFT orRIGHT button.You can select the image size appropriate for your application.[PROGRAM mode]The higher the resolution, the lower the number of available shots will be because highresolution images require more memory than lower resolution images.INFORMATION Size[ MOVIE CLIP mode ]3072QUALITYTIFFTIFFSUPER FINEFINENORMAL3072METERINGMULTISPOT3072EFFECTNORMALB & WSEPIANEGATIVESIZE3072X2304       30722816X2112       28162592X1944       25922272X1704       22722048X1536       2048SIZE640X480 640320X240 32030fpsSHARPNESSSOFTNORMALVIVIDSHARPNESSSOFTNORMALVIVIDSHARPNESSSOFTNORMALVIVIDMode Icon 3072 2816 2592 2272 2048 1600 1024 640 640 320Size3072X2304 2816X2112 2592X1944 2272X1704 2048X1536 1600X1200 1024X768 640X480 640X480 320X240STILL IMAGE modeMOVIE CLIP mode
49Quality You can select the compression ratio appropriate for yourapplication of the captured images. The higher thecompression ratio, the lower the picture quality. Mode  Icon TIFFSub menu TIFF S.FINE FINE NORMAL 30FPS 15FPSFile Format tif jpeg jpeg jpeg mov movSTILL IMAGE mode MOVIE CLIP modeTIFF is the highest quality and NORMAL is the lowest setting. Choose the setting appropriate for your needs.The TIFF file format is for professionals and provides the best quality. However, large file size reduces number of available pictures to take and increasessaving time to the memory card.[PLEASE WAIT !] message is displayed while saving a TIFF file to the memory card.This file format complies with the DCF(Design rule for Camera File system).JPEG (Joint Photographic Experts Group): JPEG is the image compression standarddeveloped by the Joint Photographic Experts Group. This type of compression is mostcommonly used for compressing photos and graphics because it can compress the filesefficiently without damaging the data.INFORMATION[PROGRAM mode]3072QUALITYTIFFTIFFSUPER FINEFINENORMAL
50MeteringIf you cannot obtain suitable exposure conditions, you can change the metering method totake brighter pictures.MULTI (           ) : Exposure will be calculated based on anaverage of the available light in theimage area. However, the calculation will be biasedtowards the centre of the image area.This is suitable for general use.SPOT (           ) : Only the rectangular area in the center ofthe  LCD monitor will be metered for light.This is suitable when the subject in the center is exposed correctly,regardless of the back lighting. Effect By using the camera's digital processor, it is possible to add special effects to your images. NORMAL  : No effect is added to the image.B & W  : Converts the image to black and white.SEPIA : Captured images will be stored in a sepia tone (a gradient of yellowish browncolours).NEGATIVE : Save the image in negative mode.[ PROGRAM mode ][ PROGRAM mode ] [ MOVIE CLIP mode ]EFFECTNORMALB & WSEPIANEGATIVE3072EFFECTNORMALB & WSEPIANEGATIVE30fps6403072METERINGMULTISPOT
51If less than 3 pictures are available in the memory, the Sequential and the AEB shootingare not available.It is best to use a triangular support for the AEB shooting for saving time is long andhand shaking may occur.The Digital zoom is not supported in the Sequential and AEB shootings.INFORMATIONSharpnessYou can adjust the sharpness of the picture you want totake. You cannot check the sharpness effect on the LCDmonitor before you take a picture, because this function isapplied only when the captured image is stored on thememory.Sub menu Icon  Description VIVIDNORMALSOFTIf you select CONTINUOUS or AEB, the flash will automatically be set to Flash Off.[SINGLE] : Take one picture only [CONTINUOS] : Take three pictures in a series by pressingthe shutter button only once.[AEB] : Take three pictures in a series in differentexposures: over exposure (+0.5EV),standard exposure (0.0EV), and shortexposure (-0.5EV). Use the mode if it ishard to decide exposure of the object.Continuous shot[ PROGRAM mode ]The edges of the image are softened. This effect is suitable for editing images on your PC.The edges of the image are sharp. This is suitable for printing.The edges of the image are emphasized. The edges willappear sharp, but noise may occur in the recorded image.SHOOTINGSINGLECONTINUOUSAEB[ PROGRAM mode ]SHARPNESSSOFTNORMALVIVID
52Use the MySET mode to save frequently used camera settings (SAVE) and use it later (LOAD)Saving the camera configuration : Available in the PROGRAM, A/S/M and NIGHT SCENEshooting modes.1. Use the camera buttons and menu to set desiredcamera configuration.2. Press the menu button in any modes except AUTO,VOICE RECORDING, MySET, MOVIE CLIP or SCENEmode.3. Press the Left/Right buttons to select the [SAVE] menutap.4. Press the Up/Down buttons to select desired MySETslot number to save.5. Press the OK button to save the current configuration inthe selected MySET slot and close the menu.Save / Load the camera configuration (MySET)Loading the saved camera configuration: available in theMySET shooting mode.1. Turn the mode dial to select the MySET shooting modeand press the menu button.2. Press the Left/Right buttons to select the [LOAD] menutap.3. Press the Up/Down buttons to select a MySET slotnumber to load.4. Press the OK button to set the camera configuration assaved in the MySET slot.* The current MySET slot number is displayed in the top left of the LCD.Saving is available for the following camera functions.Functions using the camera buttons - Macro, flash,  white balance, ISO, Aperture valueand Shutter speed. Functions using the menu screen - Size, quality, metering, effect, sharpness andcontinuous shot.INFORMATION[ PROGRAM mode ][ MySET mode ]LOADMYSET 1MYSET 2MYSET 3SAVEMYSET 1MYSET 2MYSET 3MOVE: SET:OK3072
53Scene Select the [SCENE] submenu to automatically configureoptimal settings, depending on the selected scene.Only available in the Scene Mode.[ SCENE mode ]When the close-up, sunset, dawn, fireworks are selected, it is possible that camerashake will occur. If this is the case, use a tripod to eliminate this.INFORMATIONSCENEPORTRAITCHILDRENLANDSCAPECLOSE UPSUNSET3072Sub menu Icon  Description CHILDRENLANDSCAPECLOSE UPSUNSETDAWNBACKLIGHTFIREWORKBEACH&SNOW Take a still picture of capturing moving children.PORTRAIT To take picture of a person.Close-up shooting for small objects such as plants and insects.Splendor of the setting sun.Scenery with green woods or blue sky. Daybreak scenes.Portrait without shadows caused by back light.Firework scenes.TEXTUse this mode to shoot a document.For ocean, lake, beach and snowscape scenes.
54Starting play modeTurn the camera on and select Play mode by pressing the play mode button (        ). The camera can now play back the images stored in the memory. If you have turned on the camera by pressing the POWER button, you can press the PLAYMODE button once to switch to Play mode and press it again to switch to Recording mode. You can turn the power on with the play mode button.You can turn the power on with the play mode button. The camera is turned on in play mode.Press the play mode button again to switch to the Recording mode.  Switch the mode dial tochange to another shooting mode while the camera is on.You can set up the PLAY mode function by using the camera buttons and LCD monitor. If you press PLAY button to switch to Play mode, the camera lens will retract into the camerabody for protection of the lens in about 30 seconds.Playing back a still image1. Select the PLAY mode by pressing the playmode button (        ).2. The last image stored on the memory isdisplayed on the LCD monitor.3. Select an image that you want to play back bypressing the LEFT / RIGHT button.Press and hold the LEFT or RIGHT button toplay back the images quickly.Use the jog dial to fast display only savedimage numbers instead of the actual images inthe LCD. This function is useful for browsingmany images.Manner mode : Pressing the power button for more than 3 seconds changes the buzzerand start-up sound setting to OFF, even though you may have set these to ON. Even if the camera’s power is off, you can start the play mode by pressing the playmode button.INFORMATION
55Starting play modePlaying back a movie clipSteps from 1-2 are the same as those to play back a still image.3. Select the recorded movie clip that you want to playback by using the LEFT/RIGHT button. If you select amovie clip, the movie clip indicator (        ) will bedisplayed on the LCD monitor.4. Press the play & pause button (           ) to play back amovie clip file.- To pause a movie clip file while playing it back, pressthe play & pause button again.- Pressing the play & pause button again will cause themovie clip file will restart.- To rewind the movie clip while it is playing, press theLEFT button. To fast forward the movie clip, press theRIGHT button.- To stop playback of the movie clip, press the play &pause button, and then press the LEFT or RIGHTbutton.Playing back a recorded voiceSteps from 1-2 are the same as those to play back a stillimage.3. Select the recorded voice that you want to play back byusing the LEFT/RIGHT button. If you select a recordedvoice file, the voice indicator (          ) will be displayed onthe LCD monitor.4. Press the play & pause button (            ) to play back arecorded voice file.- To pause a recorded voice file, while playing it back,press the play & pause button again.- To resume playback of the voice file, press the play & pause button.- To rewind the voice file while it is playing, press the LEFT button. To fast forward the voice file, press the RIGHT button.- To stop playback of the voice file, press the play & pause button, and then press theLEFT or RIGHT button.
56LCD monitor indicatorThe LCD monitor displays information about the shooting conditions.No. Description Icon Page1 Battery p.152 Play mode3 File Type4 Voice memo p.585 Protect indicator p.656 DPOF indicator p.687 Stored image number 10/10SIZE : 3072X2304 Size AV : F2.7 Aperture valueTV : 1/60 Shutter speedISO : 75  ISO sensitivityFLASH : OFF Whether or not theflash is used. DATE : 2004/09/01 Recording dateSIZE : 3072X2304AV : F2.7TV : 1/60ISO : 75 FLASH : OFFDATE : 2004/09/01If you press the LCD button, you can check the following recording information:
57Using the camera buttons to adjust the cameraIn Play mode, you can use the buttons on the camera to conveniently set up the Play modefunctions.Image enlargement1. Select an image that you want to enlarge and press the enlargement button.2. Different parts of the image can be viewed by pressingthe 5 function button.3. Pressing the thumbnail button will zoom back to theoriginal full sized image.- You can tell whether the image displayed is anenlarged view by checking the image enlargementindicator shown at the bottom left of the LCD monitor.(If the image is not an enlarged view, the indicator willnot be displayed.) You can also check the area ofenlargement.- TIFF, Movie clips and WAV files can’t be enlarged.- If an image is enlarged, a loss of quality may occur.Thumbnail (       ) / Enlargement (       ) button You can view multiple pictures, enlarge a selected picture, and crop and save a selected areaof an image.Thumbnail display1. While an image is displayed full screen, press thethumbnail  button.2. The thumbnail display will highlight the image that hadbeen showing at the time the thumbnail mode wasselected.3. Press the 5 function button to move to a desired image.4. To view an image separately, press the enlargement button (        ).[ Normal display mode ] [ Thumbnail display mode ]Pressing the thumbnail button (         )Pressing the enlargementbutton (          )Highlighted imageMOVE: EXIT:T
58Thumbnail(      ) / Enlargement(      ) button The maximum enlargement rate in proportion to the image size.Trimming : You can extract part of the image that you wantand save it separately.1. Select an image that you want to enlarge and press theenlargement button.2. Different parts of the image can be viewed by pressingthe 5 function button.3. Press the MENU button and a message will bedisplayed as shown alongside.4. Press the OK button to save the trimmed image with anew file name. The trimmed image will be displayed on the LCD monitor. Press the LEFT button to return to the image before it was selected.- If there is little memory space to save the trimmed image, the image can t be trimmed.Voice (     ) memo / Up buttonWhen the menu is displayed on the LCD monitor, pressing the UP button makes the menucursor move up. When the menu is not displayed on the LCD monitor, the UP button operates as the voicememo button. You can add your voice to a stored still image.Adding a Voice Memo to a Still Image1. Press the LEFT/ RIGHT button to select an image thatyou wish to add sound to.2. Press the voice memo button (        ) and the voicememo indicator will display. The camera is now ready torecord a voice memo.TRIMMING?TRIM : OKCANCEL : START:SHUTTERRECImage size3072 2816 2592 2272 2048 1600 1024 640Maximum enlargement rateX12 X11 9.00 6.45 5.33 5.00 4.00 3.33
59Voice (     ) memo / Up button3. Press the shutter button to start recording and voice willbe recorded to the still image for 10 seconds. While the voice is recording, the recording statuswindow will be displayed as shown alongside.4. The recording can be stopped by pressing the shutterbutton again.5. The (        ) icon will be displayed on the LCD monitorafter voice memo recording has finished. - Voice memos can’t be recorded onto movie clip files.- A distance of 40cm between you and the camera(microphone) is the best distance to record sound.- The voice memo will be saved in *.wav format, but hasthe same file name as the still image to which itcorresponds.- If you add a new voice memo to the still image thatalready has a voice memo, the existing voice memo will be erased.Play & Pause (         )/ Down buttonIn Play mode, the play & pause/ down button works as follows:- If the menu is displayedPress the DOWN button to move from the main menu to a sub menu, or to move down thesub menu cursor.- If a still image with a voice memo, a voice file, or a movie clip is playingIn Stop mode : Plays a still image with a voice memo, a voice file, or a movie clip.During playback : Temporarily stops playback.In Pause mode : Resumes playback[ Voice recording is stopped ] [ Voice recording is paused ][ Voice recording is playing ]STOP.SHUTTERRECPLAYPAUSEPLAY
60LEFT/ RIGHT/ MENU/ OK buttonLEFT / RIGHT/ MENU/ OK buttons activate the following.- LEFT button : While the menu is showing, press the LEFT button to select the menu tabto the left of the cursor.- RIGHT button : While the menu is showing, press the RIGHT button to select the menu tabto the right of the cursor, or to move an secondary menu.- MENU button : When you press the MENU button, the play mode menu will be displayedon the LCD monitor. Pressing it again will return the LCD to the initialdisplay.- OK button : When the menu is displayed on the LCD monitor, the OK button is used forconfirming data that is changed by using the 5 function button.If the background image is too bright to view the menus, press the LCD button and thebackground image turn to black to view clear menus.The shooting information will be displayed on the LCD monitor.The last image stored in the memory is displayed on theLCD monitor by pressing the play mode button.Pressing the LCD(        ) button in the PLAY mode willchange the display as shown below. [Image & Icons] [Image & Information]  [Image only][ Image & Icons ] [ Image & Information ] [ Image only ]Pressing the LCD buttonPressingthe LCDbuttonPressingthe LCDbuttonLCD (     ) button SIZE : 3072X2304AV : F2.7TV : 1/60ISO : 75 FLASH : OFFDATE : 2004/09/01
61Delete(     ) buttonThis deletes images stored on the memory card.Deleting Images in Play Mode1. Select an image that you want to delete by pressing theLEFT / RIGHT button and press the DELETE(       )button.2. A message will display as shown alongside on the LCDmonitor.3. Press the OK button to delete the image.Before deleting images from the camera, you should protect or download images toyour computer that you wish to keep.INFORMATION DELETE?DEL. : OKCANCEL :
62Setting up the play back function using the LCD monitorPLAY mode functions can be changed by using the LCD monitor. In the PLAY mode,pressing the MENU button displays the menu on the LCD monitor. The menus you can setup in Play mode are as follows. To capture an image after setting up the play menu, pressthe PLAY button.  The items indicated by                       are default settings.Menu tab Main menu Sub menu Secondary menu Page-----DEFAULT3X54X65X78X10 SLIDEPROTECTRESIZEROTATEDELETESTANDARDINDEXSIZEDPOFp. 66p. 65p. 67p. 64p. 68p. 69p. 69p. 700 ~ 30 PRINTSONE PICSELECTALL PICsINTERVAL REPEATSTARTUNLOCK / LOCK2816X21122272X17042048X15361600X12002592X19441024X768640X480LOGO01 ~ 10SECOFF, ON-RIGHT(90 )LEFT(90 )UPDOWN(180 )SELECTALLNOYESALL PICsSELECTSELECTALL PICs
63Setting up the play back function using the LCD monitorMenus are subject to change without prior notice.Menu tab Main menu Sub menu Secondary menu PageSTANDARD-INDEX-SIZE-ONE PIC -ALL PICs -DEFAULT -AUTOPOSTCARD, 4X6, L2L, A4, A3AUTOFULLINDEX1, 2, 4, 9, 16AUTOPLAINPHOTOFASTPHO.AUTODRAFTNORMALFINEAUTOOFFONAUTOOFFONSTANDARD-INDEX--NO -YESPICT BRIDGECUSTOMIZE p. 70p. 72p. 73p. 74p. 75p. 75PRINTERSETUPSELECTDPOF PRINT PRINTRESETPAPER SIZELAYOUTPAPER TYPEPRINT QUALITYDATE PRINTFILE NAMECANCELDPOF
64Deleting imagesOf all the files stored in the memory card, the unprotected files in the DCIM subfolder will bedeleted. Remember that this will permanently delete unprotected images. Important shotsshould be stored on a computer before deletion takes place. The startup image is stored inthe camera's internal memory (i.e., not on the memory card) and it will not be deleted even ifyou delete all files on the memory card.Deleting images1. Press the play mode button and press the menu button.2. Press the LEFT/ RIGHT button and select the [DELETE]menu tab.3. Select a desired sub menu by pressing the UP/ DOWNbutton.[SELECT] :  Press the OK button and a window forselecting the image to be deleted is opened.1) Up/Down/Left/Right : Select an imageS button : Select an image to delete. If an image is selected, the image becomes dim. 2) Press the OK button and the selected images will bedeleted.[ALL] : Press the OK button and confirmation window willbe displayed. Press the OK Button again todelete all unprotected images. If there aren't protected images, all the imagesare deleted and a [NO IMAGE!] message willdisplay.4. After deletion, the screen will be changed to the play mode screen.DELETESELECTALLEXIT:OK MOVE:DELETE?DEL. : OKCANCEL : SELECT:SSET:OK
65Protecting imagesThis is used to protect specific shots from being accidentally erased (LOCK).It also unprotects images that have been previously protected (UNLOCK).Protecting Images1. Press the play mode button and press the menu button.2. Press the LEFT/ RIGHT button and select the [PROTECT]menu tab.3. Select a desired sub menu by pressing the UP/ DOWNbutton and press the OK button.[ONE PIC] : Only an image that is displayed on the LCDmonitor is protected or unprotected.- UP/DOWN Button : Protect/release the image.- OK button : Your changes will be saved and the menuwill disappear.[SELECT] : Selection window for an image to beprotected/released is displayed.- Up/ Down/ Left/ Right : Select an image- S Button : Protect/ release the image- OK button : Your changes will be saved and the menu will disappear.[ALL PICs] : Protect/ release all saved images- UP/ DOWN Button : Protect/release the images.- OK button : Your changes will be saved and the menu will disappear.- If you protect an image, the protect icon will be displayed onthe LCD monitor. (An unprotected image has no indicator)- An image in LOCK mode will be protected from the deletefunction or [DELETE] functions, but will NOT be protectedfrom the [FORMAT] function.PROTECTONE PICSELECTALL PICsEXIT:OK MOVE:UNLOCKCCAANNCCLLEE::SSEETT::OOKKLOCKCCAANNCCLLEE::SSEETT::OOKKSELECT:SSET:OK
6601  SECONStarting the slide showImages can be displayed continuously at pre-set intervals. You can view the slide show byconnecting the camera to an external monitor.1. Press the play mode button and press the menu button.2. Press the LEFT/ RIGHT button and select the [SLIDE]menu tab.Setting play interval: Set the slide show play interval.1. Use the Up/Down buttons to select the [INTERVAL] menuand press the Right button.2. Use the Up/Down buttons to select the desired interval.3. Press the OK button to save the configuration.Repeat setting : Repeat or not the slide show after finishing the first cycle. 1. Use the Up/Down buttons to select the [REPEAT] menu and press the Right button.2. Use the Up/Down buttons to select the desired sub menu.[ON] selected  : The slide show is repeated until canceled.[OFF] Selected  : The slide show is closed after one cycle.3. Press the OK button to save the configuration.Start the slide show: The slide show can start only in the [START] menu.1. Use the Up/Down buttons to select the [START] menu.2. Press the OK button to start the slide show.- Press the Pause button to pause the slide show.- Press the Pause button (              ) again to resume the slide show.- Press the OK button to stop the slide show.The loading time depends on the image size and quality.The slide show will start from an image that was displayed on the LCD monitor. The [PWR SAVE] function can’t be activated.While the slide show is playing, only the first frame of an MOVIE file is displayed. INFORMATION SLIDEINTERVALREPEATSTARTEXIT:OK MOVE:
67ResizeChange the resolution (size) of pictures taken. Select [LOGO]  to save an image to be thestart-up image. The resized image will have a new file name.1. Press the play mode button and press the menu button.2. Press the LEFT/ RIGHT button and select the [RESIZE]menu tab.3. Select a desired sub menu by pressing the UP/ DOWNbutton and press the OK button.A large sized image can be resized to a smaller sized image, but not vice versa.Only JPEG images can be resized. TIFF, Movie clip(MOV) and Voice recording(WAV)files can’t be resized.You can change the resolution of only those files compressed in the JPEG 4:2:2 format.  The resized image will have a new file name. The [LOGO] image is stored not on thememory card but on the internal memory.Only one [LOGO] image can be saved. If you save a new [LOGO] image, the existingstartup image will be deleted.If the memory capacity is insufficient to store the resized image, a [CARD FULL!]message will display on the LCD monitor and the resized image will not be stored.INFORMATION Image Resize TypesRESIZE2816X2112 28162592X1944 25922272X1704 22722048X1536 20481600X1200 1600 EXIT:OK MOVE:3072 O O O O O O O O2816 X O O O O O O O2592 X X O O O O O O2272 X X X O O O O O2048 X X X X O O O O1600 X X X X X O O O1024 X X X X X X O O640 X X X X X X X OResize2272X17042816X21122592X19442048X15361600X12001024X768640X480LOGO
68Rotating an imageDPOF DPOF(Digital Print Order Format) allows you to embed printing information on your memorycard’s MISC folder. Select the pictures to be printed and how many prints to make.The DPOF indicator will display on the LCD monitor when an image that has DPOFinformation plays back. Images can then be printed on DPOF printers, or at an increasingnumber of photo labs.This function is not available for Movie clips and Voice recording files.You can rotate the stored images by 90, 180, or 270 degrees. You can view a picture in itsproper orientation if the picture has been taken with the camera oriented vertically or up-side-down. The rotated image can’t be enlarged or trimmed.1. Press the play mode button and use the Left / Rightbuttons to select an image to rotate.2. Press the menu button and use the Left / Right buttons to select the [ROTATE] menu tap.3. Select a desired sub menu by pressing the UP/ DOWNbutton.[RIGHT]  : Rotate picture in a clock-wise direction[LEFT]  : Rotate picture in a counter-clock-wise direction[UPDOWN] : Rotate picture 180 degrees[  Picture after 90 degrees ]CW rotation[ Picture after 180 degrees ]rotation[  Picture after 90 degrees ]CCW rotation4. Press the OK button. The rotated image will be displayed and the menu will disappear. If you display the rotated image on the LCD monitor, empty spaces may appear to the leftand right of the image.ROTATERIGHT(90 )LEFT(90 )UPDOWN(180 )EXIT:OK MOVE:
69DPOF : STANDARDImages (except for movie clips and voice file) are printed as index type.1. Press the play mode button and press the menu button.2. Press the LEFT/ RIGHT button and select the [DPOF]menu tab.3. Select the [INDEX] menu by pressing the UP/ DOWNbutton and press the RIGHT button.4. Select a desired sub menu by pressing the UP/ DOWNbutton.If [NO] is selected  : The image will not be printed in indexformat.If [YES] is selected : The image will be printed in index format.5. Press the OK button to confirm the setting.DPOF : INDEXThis function allows you to embed print quantity information on a stored image.1. Press the play mode button and press the menu button.2. Press the LEFT/ RIGHT button and select the [DPOF]menu tab.3. Select the [STANDARD] menu by pressing the UP/DOWN button and press the RIGHT button.4. Select a desired sub menu by pressing the UP/ DOWNbutton and press the OK button.[SELECT] : A window for selecting the image to be printedis opened.- Up/ Down/ Left/ Right : Select an image- S button : Confirming an image- W/T button : Select a number of prints[ALL PICs] : Set the number of copies to print for eachpicture, excluding movie clips and voicerecordings.- Up/ Down button : Select a number of prints5. Press the OK button to confirm the setting.If an image carries DPOF instructions, the DPOF indicator(         ) will show.DPOFSTANDARDINDEXPRINT SIZECANCELSELECTNOALL PICsSTANDARDEXIT:OK MOVE:DPOFBACK: SET:OKSTANDARDINDEXPRINT SIZECANCELNOYESSELECT:S PRINTS:W/T SET:OK
70DPOF : CANCELDPOF : PRINT SIZEYou can specify the print size when printing images stored on the memory card.The [PRINT SIZE] menu is available only for DPOF 1.1 compatible printers.Setting the Print Size1. Press the play mode button and press the menu button.2. Press the LEFT/ RIGHT button and select the [DPOF]menu tab.3. Select the [PRINT SIZE] menu by pressing the UP/DOWN button and press the RIGHT button.4. Select a desired sub menu by pressing the UP/ DOWNbutton and press the OK button.[SELECT] : A window for selecting the print size isopened.Up/ Down/ Left/ Right : Select an imageW/ T button : Select a print sizeS button : Selecting an image or cancel the selection[ALL PICs] : print size of all images are changed. SIZE : DEFAULT, 3X5, 4X6, 5X7, 8X10* The [DEFAULT] print size varies depending on the printermanufacturer.For your printer's default value, please refer to the user'sguide that came with your printer.You can cancel the [STANDARD], [INDEX], or [SIZE] settings. Cancel the setting to reset thevalue to its default.1. Press the play mode button and press the menu button.2. Press the LEFT/ RIGHT button and select the [DPOF]menu tab.3. Select the [CANCEL] menu by pressing the UP/ DOWNbutton and press the RIGHT button.4. Select a desired sub menu by pressing the UP/ DOWNbutton.If [STANDARD] is selected: Cancels the standard print setting.If [INDEX] is selected : Cancels the index print setting.If [SIZE] is selected  : Cancels the print size setting.5. Press the OK button to confirm the setting.DPOFBACK: SET:OKSTANDARDINDEXPRINT SIZECANCELSELECTALL PICsDPOFBACK: SET:OKSTANDARDINDEXPRINT SIZECANCELDPOFBACK: SET:OKSTANDARDINDEXPRINT SIZECANCELSTANDARDINDEXPRINT SIZEDEFAULT3X54X65X78X10SELECT:S SIZE:W/T SET:OK
71PictBridgeYou can use the USB cable to connect this camera to a printer that supports PictBridge (soldseparately) and print the stored images directly. TIFF, Movie clips and voice files cannot beprinted. You can set up the following settings from the PictBridge menu.SELECT : Setting up the scope of PictBridgePRINTER SETUP : Setting up printingPRINT : Printing picturesDPOF PRINT : Printing the DPOF filesRESET : Initializing the PictBridge functionsConnecting the Camera to a Printer1. Press the POWER button to turn on the camera.2. In a mode other than Voice Recording mode, press theMENU button.3. Press the LEFT/ RIGHT button and select [SETUP] menu tab.4. Select [USB] menu by pressing the UP/ DOWN buttonand press the RIGHT button.5. Select [PRINTER] menu by pressing the UP/ DOWNbutton and press the OK button.6. Press the menu button twice and the menu will disappear.7. Use the supplied USB cable to connect the camera to the printer as shown below.8. Turn on the printer to connect the camera to the printer.If you selected [Computer] in Step 5, when you connect the camera to your printer, the [USB I/F COMPUTER] message will display and the connection will not be established. In this case, disconnect the USB cable, and then follow the procedure from Step 2 andonward.SET UPBACK: SET:OKSOUNDLCDVIDEOQ.VIEWUSBCOMPUTERPRINTER
72PictBridge: Picture SelectionYou can select the scope of the PictBridge function.1. Connect the camera to your printer. The USB menu must be set to [PRINTER] before youconnect the camera to the printer.(See p.71)2. The [PICTBRIDGE] menu will appear.3.Select the [SELECT] menu by pressing the UP/ DOWNbutton and press the RIGHT button. 4. Use the UP and DOWN buttons to select the desiredsubmenu value, and then press the OK button.When [ONE PIC] is selected : The PictBridge function will be applied only to the picturecurrently displayed.When [ALL PICs] is selected : The PictBridge function will be applied to all pictures,excluding TIFF, movie clips and voice files.Setting the Number of Copies to Print- Select [ONE PIC] or [ALL PICs]. A screen where you can set the number of copies to print will appear as shown below. [ When [ONE PIC] is selected ] [ When [ALL PICs] is selected ]- Use the UP and DOWN buttons to select the number of copies to print and then press theOK button. The number of copies you wish to make : 01~30Unless you press the OK button, the changed number of prints will not be applied. - When selecting [ONE PIC] in Step 4, you can use the LEFT and RIGHT buttons to move tothe previous or next picture. - Press the SHUTTER button to return to the PictBridge menu. PICTBRIDGESELECTPRINTER SETUPPRINTDPOF PRINTRESETONE PICALL PICsMOVE: COPY:EXIT:SHMENU:OK01 PRINTSMOVE: COPY:EXIT:SHMENU:OK01 PRINTS
73PictBridge: Print SettingYou can select the Paper Size, Print Format, Paper Type, Print Quality, Date Print, and FileName Print menus for printed pictures.Menu Function Sub menu1. Connect the camera to your printer. The USB menu must be set to [PRINTER] before youconnect the camera to the printer.(See p.71)2. The [PICTBRIDGE] menu will appear.3. Select the [PRINTER SETUP] menu by pressing the UP/DOWN button and press the RIGHT button. 4. Use the UP and DOWN buttons to select the desiredsubmenu value, and then press the OK button.If [DEFAULT] is selected: The print format will be set to the printer's default values.If [CUSTOM] is selected: A window from which the user can set up the printformat with the desired values will appear.Use the UP and DOWN buttons to select asubmenu value, and then press the RIGHT button.Auxiliary menus will appear. Use the UP andDOWN buttons to select the desired auxiliarymenu, and then press the OK button. The menus you can set up are as follows:PAPER SIZESetting the size of the printing paperSetting the number of pictures to beprinted on a sheet of paperSetting the quality of the printing paperSetting the quality of the picture to be printedSetting whether to print the dateSetting whether to print the file nameAUTO, POSTCARD, 4X6, L, 2L, A4, A3AUTO, INDEX, 1, 2, 4, 9, 16 AUTO, PLAIN, PHOTO, FASTPHOTOAUTO, DRAFT, NORMAL, FINEAUTO, OFF, ONAUTO, OFF, ONLAYOUTPAPER TYPEPRINT QUALITYDATE PRINTFILE NAMEDepending on the manufacturer and model of your printer, some menus are inaccessible. Even though these menus will still appear on the LCD monitor, but you will not be able toselect them. PICTBRIDGESELECTPRINTER SETUPPRINTDPOF PRINTRESETDEFAULTCUSTOMIZECUSTOMIZEPAPER SIZELAYOUTPAPER TYPEPRINT QUALITYDATE PRINTAUTOPOSTCARD4X6L2L
74PictBridge: Picture PrintingPrinting Pictures1. Connect the camera to your printer. The USB menu must be set to [PRINTER] before youconnect the camera to the printer.(See p.71)2. The [PICTBRIDGE] menu will appear.3. Select the [PRINT] menu by pressing the UP/ DOWNbutton and press the RIGHT button.4. Select a desired sub menu by pressing the UP/ DOWNbutton and press the OK button.[STANDARD] : Print a selected image according to thenumber of copies required.[INDEX] : Print all images displayed in the Indexformat.5. The screen shown on the right will appear and thepicture will be printed. If no picture is selected, the [NO IMAGE!] message will be displayed. If you pressthe SHUTTER button during printing, printing will becanceled and the menu from Step 2 will appear.6. If an error occurs during printing, the screen shown below will appear.When printing pictures by connecting the camera to the printer, use the AC adapter.If the printer is turned off during printing, the printing will stop and the paper will bedispelled.If there are continuous print error, please check the print condition. INFORMATION Press the LEFT button to cancel printing.Follow the Steps 1 to 4 again to print thepicture(s).Press the OK button to resume printing,or press the LEFT button to cancelprinting.[ Fatal error ] [ Recoverable error ]PICTBRIDGESELECTPRINTER SETUPPRINTDPOF PRINTRESETSTANDARDINDEXERROR LEFT : CANCELWARNINGOK: RESUMELEFT: CANCELCANCEL:SH1
75PictBridge : DPOF AUTO PRINTThis allows you to directly print the files with DPOF information. For instructions on how to set up DPOF, refer to pages 69 to 70.1. Connect the camera to your printer. The USB menu must be set to [PRINTER] before youconnect the camera to the printer.(See p.71)2. The [PICTBRIDGE] menu will appear.3. Select the [DPOF PRINT] menu using the UP/DOWNbutton and press the RIGHT button. Next, select [YES]using the Up/Down button, and then press the OKbutton.4. The screen shown on the right will appear and thepicture will be printed. If no picture is selected, the [NO IMAGE!] message will be displayed.  If you pressthe SHUTTER button during printing, printing will becanceled and the menu from Step 2 will appear.5. If an error occurs during printing, the error messagenumber 6 on page 74 will be displayed. For details, please refer to page 74.This allows you to restore the values of the PictBridge menu, which was changed inCUSTOMIZE, to their default values.1. Connect the camera to your printer. The USB menu must be set to [PRINTER] before youconnect the camera to the printer.(See p.71)2. The [PICTBRIDGE] menu will appear.3. Select the [RESET] menu by pressing the UP/ DOWNbutton and press the RIGHT button.4. Select a desired sub menu by pressing the UP/ DOWNbutton and press the OK button.- If [NO] is selected : Settings will not be reset.- If [YES] is selected : All print and image settings will be reset.Default print setting varies depending on the printer manufacturer. For your printer s default setting, refer to the user s guide that came with your printer.PictBridge : RESETSTOP.SHUTTERPICTBRIDGESELECTPRINTER SETUPPRINTDPOF PRINTRESETYESNOPICTBRIDGESELECTPRINTER SETUPPRINTDPOF PRINTRESETYESNO
76Setup menuIn this mode, you can set up basic settings. You can use the setup menu in all cameramodes, except Voice Recording mode. The items indicated by                     are default settings.Menu tab Main menu Sub menu Secondary menu PageRESET -SERIES -NO -YES -YY/MM/DD -MM/DD/YY -DD/MM/YY -OFF   -DATE -DATE & TIME -OFF -ON -OFF -LOW -MEDIUM -HIGH -04/09/01 13:00FILEPWR SAVELANGUAGEFORMATDATE. TIMEIMPRINTLAMPENGLISHFRENCHGERMANSPANISHITALIANRUSSIANDUTCHPORTUGUESEATYPEBTYPEENGLISHKOREANS.CHINESET.CHINESEDANISHSWEDISHTHAIMALAYSIANOFF, 01 ~ 03 ~ 10MINp.77p.78p.79p.79p.80p.80p.81p.82SOUND-
77Setup menuThis function allows the user to select the file naming format.Assigning File Names1. In any mode other than Voice Recording mode, press theMENU button.2. Press the LEFT/ RIGHT button and select the [SETUP]menu tab.3. Select the [FILE] menu by pressing the UP/ DOWN buttonand press the RIGHT button.4. Select a desired sub menu by pressing the UP/ DOWNbutton and press the OK button.[RESET] : After using the reset function, the next file name will be set from 0001 evenafter formatting, deleting all or inserting a new memory card.[SERIES] : Under this system, the file name will directly follow the last stored file name,regardless of any actions such as file deletion or formatting.File nameMenu tab Main menu Sub menu Secondary menu PageDARK -NORMAL -BRIGHT -NTSC -PAL -OFF -COMPUTER -PRINTER -NO -YES -1 ~ 5 SECLCD VIDEOQ.VIEWUSBRESETp.82p.83p.84p.84p.85SET UPFILEPWR SAVELANGUAGEFORMATDATE.TIMEBACK: SET:OK3072RESETSERIES-

Navigation menu