Hanwha Techwin DIGIMAXU-CA5 Digital Camera User Manual UC2 en c V07

Samsung Techwin Co Ltd Digital Camera UC2 en c V07

Contents

Users Manual 2 of 2

61Voice ( ) memo / Up button3. Press the shutter button to start recording and voice willbe recorded to the still image for 10 seconds. While the voice is recording, the recording statuswindow will be displayed as shown alongside.4. The recording can be stopped by pressing the shutterbutton again.5. The ( ) icon will be displayed on the LCD monitorafter voice memo recording has finished. - Voice memos can’t be recorded onto movie clip files.- A distance of 40cm between you and the camera(microphone) is the best distance to record sound.- The voice memo will be saved in *.wav format, but hasthe same file name as the still image to which itcorresponds.- If you add a new voice memo to the still image thatalready has a voice memo, the existing voice memo will be erased.Play & Pause ( )/ Down buttonIn Play mode, the play & pause/ down button works as follows:- If the menu is displayedPress the DOWN button to move from the main menu to a sub menu, or to move down thesub menu cursor.- If a still image with a voice memo, a voice file, or a movie clip is playingIn Stop mode : Plays a still image with a voice memo, a voice file, or a movie clip.During playback : Temporarily stops playback.In Pause mode : Resumes playback[ Voice recording is stopped ] [ Voice recording is paused ][ Voice recording is playing ]33 3Stop : ShutterPLAYPAUSEPLAY
62LEFT/ RIGHT/ MENU/ OK buttonLEFT / RIGHT/ MENU/ OK buttons activate the following.- LEFT button : While the menu is showing, press the LEFT button to select the menu tabto the left of the cursor.- RIGHT button : While the menu is showing, press the RIGHT button to select the menu tabto the right of the cursor, or to move an secondary menu.- MENU button : When you press the MENU button, the play mode menu will be displayedon the LCD monitor. Pressing it again will return the LCD to the initialdisplay.- OK button : When the menu is displayed on the LCD monitor, the OK button is used forconfirming data that is changed by using the 5 function button.The shooting information will be displayed on the LCD monitor.The last image stored in the memory is displayed on theLCD monitor by pressing the play mode button.Pressing the LCD( ) button in the PLAY mode willchange the display as shown below. [Image & Icons] [Image & Information] [Image only][ Image & Icons ] [ Image & Information ] [ Image only ]Pressing the LCD buttonPressing theLCD buttonPressing theLCD buttonLCD ( ) button Size : 2592X1944Av : F2.8Tv : 1/60ISO : 100Flash : OffDate : 2005/01/01
63Album button (M button)All A1 A2A3 A4 A5A6 A7 A8SelectSlideAddRemoveExit:MENU Move : All A1 A2A3 A4 A5A6 A7 A8SelectSlideAddRemoveExit:MENUA4SelectSlideAddRemoveExit:MENU Move : You can organise the captured still images into albumsby using the M button. This camera has 8 albums and each album can take upto 100 images. How to use the albumSelecting the album1. In the play mode, press the M button.2. Select [Select] menu by pressing the Up/Down buttonand press the Right button. 3. Select a desired album by pressing theUp/Down/Left/Right buttons and press the OK button. Inserting still images into the album1. After selecting an album, press the menu button. 2. Select the [Add] menu by pressing the Up/Downbutton and press the Right button.
64Album button (M button)A4No Image!A4A4No Image!AddAddCancelConfirm:OKA4RemoveRemoveCancelConfirm:OKA4SelectSlideAddRemoveExit:MENU Move : SelectAll Pics3. Select the still images you wish to add by pressing theUp/Down/Left/Right buttons and press the Zoom Tbutton. V marks are displayed on the selected images.* To cancel the selection, press the Zoom T button again. 4. Press the OK button and a confirmation window willdisplay. Select a desired sub menu by pressing theUP/ DOWN button and press the OK button.- [Add] : Inserts the selected images into the album. - [Cancel] : Cancels the inserting images.Removing still images from the album1. Select a desired album and press the menu button. 2. Select [Remove] menu by pressing the Up/Downbutton and press the Right button. 3. Select a desired sub menu and press the OK button. - [All] : All of the still images in the album will beremoved. - [Select] : Specific still images in the album can beremoved. If [Select] is selected- Select images that you want to remove by pressingthe Up/Down/Left/Right buttons and press the Zoom T button. V marks are displayed on theselected images. 4. Press the OK button and a confirmation window willdisplay. Select a desired sub menu by pressing theUP/ DOWN button and press the OK button.- [Remove]: Removes the selected images from thealbum. - [Cancel] : Cancels the removing images.* The removed images are not deleted from thememory, but just removed from the album.
65Album button (M button)If a an image is deleted from the memory, the image doesn’t display on an album. An image can’t be added twice into the same album. An image can be added into the different albums. INFORMATIONA4SelectSlideAddRemoveExit:MENU Move : SelectAll PicsA4SelectSlideAddRemoveExit:MENU Move : A4SelectSlideAddRemoveExit:MENU Move : StartIntervalRepeatEffect3 SecOffCancelStartIntervalRepeatEffect3 SecOffCancelPlaying back the albumsPlaying back all of the albums1. Select [All] menu and press the OK button. All of thealbums will be selected. 2. Press the menu button. 3. Select [Slide] menu by pressing the Up/Down buttonand press the Right button. You can select [Start], [Interval], [Repeat] and[Effect] menus. - [Start] : Start the slide show- [Interval] : Set the slide show play interval- [Repeat] : Choose to repeat the slide show afterfinishing the first cycle. - [Effect] : Unique screen effects can be used forthe slide show.4. Select [Start] menu by pressing the Up/Down buttonand press the OK button to start the slide show. Playing a desired album1. Select a desired album and press the OK button. 2. Press the menu button.3. Select [Slide] menu by pressing the Up/Down buttonand press the Right button. You can select [Start], [Interval], [Repeat] and[Effect] menu.4. Select the [Start] menu and press the OK button tostart the slide show. A4Select:T Set:OK
66Delete( ) buttonThis deletes images stored on the memory card.Before deleting images from the camera, you should protect or download images to yourcomputer that you wish to keep.INFORMATION Deleting Images in Thumbnail Display Mode1. Use the UP, DOWN, LEFT, and RIGHT buttons to select the image you want to delete,and then press the DELETE ( ) button.2. The following message will be displayed on the LCD monitor.3. Select the submenu values by pressing the UP/DOWN button and then press the OKbutton.If [Delete] is selected : deletes the selected images.If [Cancel] is selected : cancels "Delete Image".Deleting Images in Play Mode1. Select an image that you want to delete by pressing theLEFT / RIGHT button and press the DELETE( )button.2. A message will display as shown alongside on the LCDmonitor.3. Select the submenu values by pressing the UP/DOWNbutton and then press the OK button.If [Delete] is selected: deletes the selected images.If [Cancel] is selected: cancels "Delete Image".Press the DELETE button.Delete?DeleteCancelConfirm:OKDelete?DeleteCancelConfirm:OK
67Setting up the play back function using the LCD monitorPLAY mode functions can be changed by using the LCD monitor. In the PLAY mode,pressing the MENU button displays the menu on the LCD monitor. The menus you can setup in Play mode are as follows. To capture an image after setting up the play menu, pressthe PLAY button.Menu tab Main menu Sub menu Secondary menu Page-------------Slidep. 56p. 56p. 55-1, 3, 5, 10secOff / OnCancelEffect 1, 2, 3, 4Right 90Left 90180HorizontalVerticalStartIntervalRepeatDPOFStandard IndexSizeSelect/ All Pics/ CancelNo/ YesSelect/ All Pics/ CancelProtectDeleteEffectSelect All PicsSelect All PicsUnlock / LockResizeRotatep. 57p. 57p. 572272 x 17042048 x 15361600 x 12001024 x 768640 x 480User Image
68Setting up the play back function using the LCD monitorMenu tab Main menu Sub menu Secondary menu Page----AutoPostCard4X6L2LA4A3AutoFull1248916AutoPlainPhotoFastPhotoAuto SetCustom SetImagesp. 75p. 75p. 74No YesSizeLayoutTypeOne PicAll PicsThis menu is available while the camera is connected to a PictBridge supporting printer(direct connection to the camera, sold separately) with a USB cable.
69Setting up the play back function using the LCD monitorQualityMenu tab Main menu Sub menu Secondary menu PageAutoDraftNormalFineAutoOffOnAutoOffOn Standard-Index-Cancel- No-Yes-No -Yes -PrintCustom Setp. 76p. 76p. 77p. 75File NameDateDPOF PrintResetMenus are subject to change without prior notice.
70Starting the slide showImages can be displayed continuously at pre-set intervals.You can view the slide show by connecting the camera to an external monitor.1. Press the play mode button and press the menu button.2. Press the LEFT/ RIGHT button and select the [Slide]menu tab.Start the slide show: The slide show can start only in the[Start] menu.1. Use the Up/Down buttons to select the [Start] menu.2. Press the OK button to start the slide show.- Press the Pause button to pause the slide show.- Press the Pause button ( ) again to resume the slide show.- To stop the slide show, press the play & pause button, and then press the LEFT or RIGHTbutton.Setting play interval: Set the slide show play interval.1. Select the [Interval] sub menu by pressing the UP/DOWN button and press the RIGHTbutton.2. Use the Up/Down buttons to select the desired interval.3. Press the OK button to save the configuration.Repeat setting : setting the slide show to repeat after the first cycle.1. Use the Up/Down buttons to select the [Repeat] menu and press the Right button.2. Use the Up/Down buttons to select the desired sub menu.[On] selected : The slide show is repeated until cancelled.[Off] Selected : The slide show is closed after one cycle.3. Press the OK button to save the configuration.The loading time depends on the image size and quality.The slide show will start from an image that was displayed on the LCD monitor.The [Power Off] function can’t be activated.While the slide show is playing, only the first frame of a MOVIE file is displayed.INFORMATIONSlideExit: MENU Move : StartInterval 1 secRepeat Off
71Starting the slide showProtecting imagesConfigure slide show effects: Unique screen effects can be used for the slide show.1. Select the [Effect] sub menu by pressing the UP/ DOWN button and press the RIGHTbutton.2. Use the Up/Down Button to select the type of effect.[Cancel] : Normal display.[Effect 1] : Image is displayed slowly.[Effect 2] : Image is displayed slowly from the centreoutwards.[Effect 3] : Image moves from the top left.[Effect 4] : The image slides diagonally from top left tobottom right. 3. Press the OK button to confirm the setting.This is used to protect specific shots from being accidentally erased (Lock).It also unprotects images that have been previously protected (Unlock).Protecting Images1. Press the play mode button and press the menu button.2. Press the LEFT/ RIGHT button and select the [Protect]menu tab.3. Select a desired sub menu by pressing the UP/ DOWNbutton and press the OK button.[Select ] : Selection window for an image to beprotected/released is displayed.- Up/Down/Left/Right : Select an image- Zoom W/T Button : Protect/release the image- Menu Button : Your changes will be saved andthe menu will disappear.[All Pics] : Protect/release all saved images- Zoom W/T Button : Protect/release the images- Menu Button : Your changes will be saved andthe menu will disappear.Back:Set : OKInterval CancelRepeat Effect1Effect Effect2SlideProtectExit: MENU Move : SelectAll PicsSet:OKWUnlock TSet:OKWUnlock T
72Protecting images- If you protect an image, the protect icon will be displayedon the LCD monitor. (An unprotected image has noindicator)- An image in LOCK mode will be protected from thedelete function or [Delete] functions, but will NOT beprotected from the [Format] function.Deleting imagesOf all the files stored in the memory card, the unprotected files in the DCIM subfolder will bedeleted. Remember that this will permanently delete unprotected images. Important shots should be stored on a computer before deletion takes place. The startupimage is stored in the camera's internal memory (i.e., not on the memory card) and it will notbe deleted even if you delete all files on the memory card.Deleting images1. Press the play mode button and press the menu button.2. Press the LEFT/ RIGHT button and select the [Delete]menu tab.3. Select a desired sub menu by pressing the UP/ DOWNbutton and press the OK button.[Select ]: Selection window for an image to delete isdisplayed.- Up/Down/Left/Right : Select an image- Zoom T Button : Select the image for deletion.(V mark)- OK Button : Press the OK Button to displayconfirmation message. Select the[Delete] menu and press the OKbutton to delete V marked images. [All Pics] : Displays confirmation window. Select the[Delete] menu and press the OK button todelete all unprotected images. If there aren’tprotected images, all the images are deletedand a [No Image!] message will display. 4. After deletion, the screen will be changed to the playmode screen.Del:OKSelect:TDel:OKDelete?DeleteCancelConfirm:OKDeleteExit: MENU Move : SelectAll Pics
73ResizeChange the resolution (size) of pictures taken. Select [[User image]] to save an image to bethe start-up image. The resized image will have a new file name.1. Press the play mode button and press the menu button.2. Press the LEFT/ RIGHT button and select the [Resize]menu tab.3. Select a desired sub menu by pressing the UP/ DOWNbutton and press the OK button.A large sized image can be resized to a smaller sized image, but not vice versa.Only JPEG images can be resized. Movie clip(AVI) and Voice recording(WAV) files can’tbe resized.You can change the resolution of only those files compressed in the JPEG 4:2:2 format.The resized image will have a new file name. The [User Image] image is stored not on thememory card but on the internal memory.Only two [User Image] images can be saved. If you save a new [User Image] image, theexisting startup image will be deleted in order.If the memory capacity is insufficient to store the resized image, a [Card Full!] messagewill display on the LCD monitor and the resized image will not be stored.INFORMATIONResize2272X1704 2048X1536 1600X12001024X768640X480User image2592 O O O O O O2272 X O O O O O2048 X X O O O O1600 X X X O O O1024 X X X X O O640 X X X X X OImage Resize TypesExit: MENU Move : 2272X17042048X15361600X1200Resize
74Rotating an imageYou can rotate the stored images by various degrees.1. Press the play mode button and press the menu button.2. Press the LEFT/ RIGHT button and select the [Rotate]menu tab.3. Select a desired sub menu by pressing the UP/ DOWNbutton.4. Press the OK button and a confirmation window willdisplay. Select a desired sub menu by pressing the UP/DOWN button and press the OK button. [Rotate] : The image will be rotated.[Cancel] : The rotation will be cancelled. 5. Press the OK button and the rotated image will be displayed. If you display the rotated image on the LCD monitor, empty spaces may appear to the leftand right of the image.[Right 90˚] : Rotate picturein a clock-wise direction[Left 90˚] : Rotate picture in acounter-clock-wise direction[180˚] : Rotate picture 180degrees[Horizontal] : Rotate picturehorizontally[Vertical] : Rotate picturevertically DPOF DPOF(Digital Print Order Format) allows you to embed printing information on your memorycard’s MISC folder. Select the pictures to be printed and how many prints to make.The DPOF indicator will display on the LCD monitor when an image that has DPOFinformation plays back. Images can then be printed on DPOF printers, or at an increasingnumber of photo labs.This function is not available for Movie clips and Voice recording files.Exit: MENU Move : Right 90˚Left 90˚180˚Rotate
75DPOF : STANDARDImages (except for movie clips and voice file) are printed as index type.1. Press the play mode button and press the menu button.2. Press the LEFT/ RIGHT button and select the [DPOF]menu tab.3. Select the [Index] menu by pressing the UP/ DOWNbutton and press the RIGHT button.4. Select a desired sub menu by pressing the UP/ DOWNbutton.If [No] is selected : Cancel the index print setting.If [Yes] is selected : The image will be printed in indexformat.5. Press the OK button to confirm the setting.DPOF : INDEXThis function allows you to embed print quantity information on a stored image.1. Press the play mode button and press the menu button.2. Press the LEFT/ RIGHT button and select the [DPOF]menu tab.3. Select the [Standard] menu by pressing the UP/ DOWNbutton and press the RIGHT button.4. Select a desired sub menu by pressing the UP/ DOWNbutton and press the OK button.[Select] : Selection window for an image to print isdisplayed.- Up/Down/Left/Right: Select an image to print.- Zoom W/T Button: Select the number of prints.[All Pics] : Configure number of prints for all picturesexcept movie and voice files.- W/T button : Select a number of prints[Cancel] : Cancel the print setup.5. Press the OK button to confirm the setting.If an image carries DPOF instructions, the DPOFindicator ( ) will show.Set:OKW0 Prints TSet:OKWPrints TDPOFExit: MENU Move : Standard SelectIndex NoSize SelectDPOFBack:Set : OKStandardIndex NoSize Yes
76DPOF : PRINT SIZEYou can specify the print size when printing images stored on the memory card.The [Size] menu is available only for DPOF 1.1 compatible printers.Setting the Print Size1. Press the play mode button and press the menu button.2. Press the LEFT/ RIGHT button and select the [DPOF]menu tab.3. Select the [Size] menu by pressing the UP/ DOWN buttonand press the RIGHT button.4. Select a desired sub menu by pressing the UP/ DOWNbutton and press the OK button.[Select] : Selection window for an image to be changedprinted size is displayed.- Up/Down/Left/Right : Select an image.- Zoom W/T Button : Change the print size.- OK button : Your changes will be saved and the menuwill disappear.[All Pics] : Change print size of all saved images.- Up/Down/Left/Right : Select an image.- W/ T button : Select a print size- OK button : Confirm the changed setting.[Cancel] : Cancel all of the print size settings.* DPOF [Size] secondary menu : Cancel, 3X5, 4X6, 5X7,8X10Set:OKWTSet:OKWTDPOFBack:Set : OKStandard SelectIndex All PicsSize Cancel
77[Using the USB cable with Cradle][Using the USB cable with Camera]PictBridgeYou can use the USB cable to connect this camera to a printer that supports PictBridge (soldseparately) and print the stored images directly. Movie clips and voice files cannot be printed. Setting up the camera for connection with the printer1. In any mode with the exception of Voice Recording mode,press the MENU button.2. Press the LEFT/ RIGHT button and select [Setup] menutab.3. Select [USB] menu by pressing the UP/ DOWN buttonand press the RIGHT button.4. Select [Printer] menu by pressing the UP/ DOWN buttonand press the OK button.Connecting the Camera to a PrinterUsing the USB cable with Cradle : Connect the camera and the cradle. Connect the cradle toa printer’s USB port with the supplied USB cable. Using the USB cable with Camera : Connect the camera to a printer’s USB port with the supplied USB cable.If you selected [Computer] in Step 4, when you connect the camera to your printer, the[Connecting Computer] message will display and the connection will not be established.In this case, disconnect the USB cable, and then follow the procedure from Step 2 andonward.DPOFBack:Set : OKSoundUSB ComputerLamp PrinterNOR
78PictBridge: Picture SelectionSelect pictures to print1. The [Images] menu will appear.2. Use the UP and DOWN buttons to select the desiredsubmenu value, and then press the OK button.When [One Pic] is selected : The PictBridge function willbe applied only to thepicture currently displayed.When [All Pics] is selected : The PictBridge function willbe applied to all pictures,excluding movie clips and voice files.Images : Select the pictures to be printed.Printer Setup : Setting up printing(Auto Set/ Custom Set)Print : Printing picturesDPOF Print : Printing the DPOF filesReset : Initializing the PictBridge functionsYou can set up the following settings from the PictBridge menu.[When [One Pic] is selected] [When [All Pics] is selected]- Press the Up/Down button to select the number of prints. : Maximum 30 prints.- Use the Left/Right button to select another picture and select the number of prints foranother picture.- After setting the number of prints, press the OK button to save.- Press the Shutter button to return to the menu without setting the number of prints.Setting the Number of Copies to Print- Select [One Pic] or [All Pics]. A screen where you can set the number of copies to print willappear as shown below.ImagesExit : MENU Move:One PicAll Pics0Exit:Shutter Set:OK10PREV NEXT0Exit:Shutter Set:OK
79PictBridge: Print SettingMenuSize Setting the size of the printing paperAuto, PostCard, 4x6, L, 2L, A4, A3Setting the number of pictures to be printed on a sheet of paperType Setting the quality of the printing paper Auto, Plain, Photo, FastPhotoQualitySetting the quality of the picture to be printedAuto, Draft, Normal, FineDate Setting whether to print the date Auto, Off, OnFile Name Setting whether to print the file name Auto, Off, OnAUTO SET1. Use the LEFT and RIGHT buttons to select the [Auto Set] menu tab.2. Use the UP and DOWN buttons to select the desiredsubmenu value, and then press the OK button.[No] : [Custom Set] values are kept.[Yes] : All values in the [Custom Set] are automaticallychanged.Some menu options are not supported in all manufacturer and printer models. If notsupported, the menus are still displayed in the LCD, but are not selectable.If the setting values are not changed in the automatic/manual setting, the setting values areautomatically kept.Custom Set : You can select the Paper Size, Print Format, Paper Type, Print Quality, DatePrint, and File Name Print menus for printed pictures.Function Sub menuThe menus you can set up are as follows:Auto SetExit : MENU Move:NoYesCustom SetBack:Set : OKSize AutoLayOut PostCardType 4X6Auto, Full, 1, 2, 4, 8, 9, 16Layout1. Use the LEFT and RIGHT buttons to select the [CUSTOM SET] menu tab.2. Use the UP and DOWN buttons to select the desiredsubmenu value, and then press the RIGHT button.3. Use the UP and DOWN buttons to select the desiredsubmenu value, and then press the OK button.
80PictBridge: PrintingDPOF Print : This allows you to directly print the files with DPOF information.1. Use the LEFT and RIGHT buttons to select the [DPOF Print] menu tab.2. Use the UP and DOWN buttons to select the desiredsubmenu value, and then press the OK button.[No] : Cancel the printing[Yes] : Directly print the file with the DPOF informationDepending on the manufacturer and printer model,some menus may not be available. With a printer without supporting the DPOF, themenu is still displayed but not available.Printing Pictures1. Use the LEFT and RIGHT buttons to select the [Print]menu tab.2. Use the UP and DOWN buttons to select the desiredsubmenu value, and then press the OK button.[Standard]: Print the pictures stored in the memory cardin set numbers. One picture is printed onone piece of paper.[Index] : Print multiple images on one sheet ofpaper.3. The screen shown on the right will appear and thepicture will be printed. If no picture is selected, the [No image!] message will be displayed. Press theMenu/OK button while printing to cancel the printing andthe [Images] menu is displayed.Number of pictures in an index print varies dependson the printer used.1/1PrintExit : MENU Move:StandardIndexDPOF PrintExit : MENU Move:NoYesCancel : OK
81PictBridge : RESETInitialises user-changed configurations.1. Use the LEFT and RIGHT buttons to select the [Reset]menu tab.2. Use the UP and DOWN buttons to select the desiredsubmenu value, and then press the OK button.If [No] is selected : Settings will not be reset.If [Yes] is selected : All print and image settings will bereset.Default print setting varies depending on the printer manufacturer.For your printer’s default setting, refer to the user’s guide that came with your printer.ResetExit : MENU Move:NoYes
82Setup menuIn this mode, you can set up basic settings. You can use the setup menu in all cameramodes, except Voice Recording mode. The items indicated by are default settings.Menu tab Main menu Sub menu Secondary menu PageReset -Series -Power OffOff, 1, 3, 5, 10 min- p.80ENGLISHP”CCK»…PORTU.FRANÇAIS DUTCHDEUTSCH DANSKESPAÑOL SVENSKA p.81ITALIANO SUOMIMELAYUNo -Yes -04/07/01 13:00 -yy/mm/dd -dd/mm/yy -mm/dd/yy -Off -Imprint Date - p.82D & Time -Off -Low -Medium -High -Computer -Printer -FileLanguageFormatD & TimeSoundp.79p.81p.82p.83p.83USB
83Setup menuThis function allows the user to select the file naming format.Assigning File Names1. In any mode with the exception of Voice Recording mode,press the MENU button.2. Press the LEFT/ RIGHT button and select the [Setup]menu tab.3. Select the [File] menu by pressing the UP/ DOWN buttonand press the RIGHT button.4. Select a desired sub menu by pressing the UP/ DOWNbutton and press the OK button.[Reset] : After using the reset function, the next file name will be set from 0001 even afterformatting, deleting all or inserting a new memory card.[Series]: New files are named using numbers that follow the previous sequence, evenwhen a new memory card is used, or after formatting, or after deleting all pictures5. Press the menu button twice and the menu will disappear.File name* Menus are subject to change without prior notice.Menu tab Main menu Sub menu Secondary menu PageOff -On -Off -On -Dark -LCD Normal - p.85Bright -NTSC -PAL -Quick View Off, 1, 3, 5 sec -No -Yes -Video OutLampAF LampResetp.84p.85p.86Back:Set : OKFileResetPower Off SeriesLanguageNORSetup
84File nameThe first stored folder name is 100SSCAM, and the first file name is SUC50001.File names are assigned sequentially from SUC50001 SUC50002 ~ SUC59999.The folder number is assigned sequentially from 100 to 999 as follows: 100SSCAM 101SSCAM ~ 999SSCAM.The files used with the memory card conform to the DCF(Design rule for Camera Filesystems) format.INFORMATIONEven if the batteries or AC adapter are removed and inserted again, the power off settingwill be preserved.Note that the automatic power off function will not operate if the camera is in PC mode,slide show, playing back a voice recording, playing back a movie clip and the [Composite]shots. INFORMATIONAuto power offSetting Power Off1. In any mode with the exception of Voice Recording mode,press the MENU button.2. Press the LEFT/ RIGHT button and select the [Setup]menu tab.3. Select the [Power Off] menu by pressing the UP/ DOWNbutton and press the RIGHT button.4. Select a desired sub menu by pressing the UP/ DOWNbutton and press the OK button.Selecting [Off] : The power off function will not operate.[1, 3, 5, 10min] : The power will turn off automatically if not used for the period of timespecified.5. Press the menu button twice and the menu will disappear.This function switches the camera off after a set amount of time in order to preventunnecessary battery drainage.Back:Set : OKFileOffPower Off 1 minLanguage 3 minNORSetup
85Language Setting Language1. In any mode with the exception of Voice Recording mode,press the MENU button.2. Press the LEFT/ RIGHT button and select the [Setup]menu tab.3. Select the [Language] menu by pressing the UP/ DOWNbutton and press the RIGHT button.4. Select a desired sub menu by pressing the UP/ DOWNbutton and press the OK button. LANGUAGE sub menu : English, Korean, French, German, Spanish, Italian, S.Chinese,T.Chinese, Japanese, Russian, Portuguese, Dutch, Danish,Swedish, Finnish, Thai. Malaysian and Arabic.5. Press the menu button twice and the menu will disappear.Formatting a Memory Card1. In any mode other than Voice Recording mode, press theMENU button.2. Press the LEFT/ RIGHT button and select the [Setup]menu tab.3. Select the [Format] menu by pressing the UP/ DOWNbutton and press the RIGHT button.4. Select a desired sub menu by pressing the UP/ DOWNbutton and press the OK button.If [No] is selected : The memory card will not be formatted. Press the menu button twice and the menu display will disappear. If [Yes] is selected : A [ Please Wait! ] message appears and the memory card will beformatted. If you ran FORMAT in Play mode, a [ No Image! ] messagewill appear.There is a choice of languages that can be displayed on the LCD monitor. Even if the batteries orAC adapter are removed and inserted again, the language setting will be preserved.Formatting a memory cardThis is used for formatting the memory card. If you run [Format] on the memory card, allimages, including the protected images, will be deleted. Be sure to download importantimages to your PC before formatting the memory card.Be sure to run [Format] on the following types of memory card.- A new memory card, or an unformatted memory card.- A memory card that has a file this camera can t recognise or one that has been takenfrom another camera.Always format the memory card using this camera. If you insert a memory card that hasbeen formatted using other cameras, memory card readers, or PCs, you will get a [ Card Error! ] message.INFORMATIONBack:Set : OKFileEnglishPower OffLanguageFRANÇAISNORSetupBack:Set : OKPower OffLanguage NoFormatYesNORSetup
86Setting up the Date/ Time/ Date typeYou can change the date and time that will be displayed on the captured images and set upthe date type.Setting Date/Time & Selecting Date Format1. In any mode with the exception of Voice Recording mode,press the MENU button.2. Press the LEFT/ RIGHT button and select the [Setup]menu tab.3. Select the [D & Time] menu by pressing the UP/ DOWNbutton and press the RIGHT button.4. Use the UP, DOWN, LEFT, and RIGHT buttons to selectthe desired submenu value, and then press the OK button.RIGHT button : Selects the year/month / day/hour / minute date type.LEFT button : Moves the cursor to the [D & Time] main menu if the cursor is atthe first item of the date and time setup. In all other cases, thecursor will be shifted to the left of its current position.UP and DOWN buttons : Changes the setting value.- Date type : [yy/mm/dd] / [dd/mm/yy] / [mm/dd/yy]5. Press the menu button twice and the menu will disappear.There is an option to include DATE/TIME on still images.Date Imprinting1. In any mode with the exception of Voice Recording mode,press the MENU button.2. Press the LEFT/ RIGHT button and select the [Setup] menu tab.3. Select the [Imprint] menu by pressing the UP/ DOWNbutton and press the RIGHT button.4. Use the UP and DOWN buttons to select the desired dateimprint type, and then press the OK button.[Off] : The DATE & TIME will not be imprinted on the image file.[Date] : Only the DATE will be imprinted on the image file.[D & Time] : The DATE & TIME will be imprinted on the image file.5. Press the menu button twice and the menu will disappear.Imprinting the recording dateThe Date & Time are imprinted at the bottom right side of the still image.The date will be imprinted as a DATE TYPE setting.TIME is imprinted in the following way : [Hour : Minute] and hours are shown using the 24hour clock.The imprint function is applied only to still images.INFORMATIONBack:Set : OKFormat OffD & Time DateImprint D & TimeNORSetupBack:Set : OKLanguageFormatD & TimeNORSetup05 / 01/ 01 01:00yy/mm/dd
87Sound Connecting an External Device (USB)If you set the operation sound to ON, various sounds will be activated for camera startup,when button are pressed, and if there is a card error, so that you can be aware of the cameraoperation status.Setting Operation Sounds1. In any mode with the exception of Voice Recording mode,press the MENU button.2. Press the LEFT/ RIGHT button and select the [Setup]menu tab.3. Select the [Sound] menu by pressing the UP/ DOWNbutton and press the RIGHT button.4. Select a desired sub menu by pressing the UP/ DOWNbutton and press the OK button.[Sound] sub menu : Off/ Low/ Medium/ High5. Press the menu button twice and the menu will disappear.You can select an external device to which you want to connect the camera using the USB cable.Selecting an External Device1. In any mode with the exception of Voice Recording mode,press the MENU button.2. Press the LEFT/ RIGHT button and select the [Setup]menu tab.3. Select the [USB] menu by pressing the UP/ DOWN buttonand press the RIGHT button.4. Select a desired sub menu by pressing the UP/ DOWNbutton and press the OK button.[Computer] : Select this if you want to connect the camera to your PC. Refer to page 105 for instructions on how to connect the camera to your PC.[Printer] : Select this if you want to connect the camera to your printer. Refer to page 73 for instructions on how to connect the camera to yourprinter.5. Press the menu button twice and the menu will disappear.Back:Set : OKD & Time OffImprint LowSound MediumNORSetupBack:Set : OKImprintSound ComputerUSB PrinterNORSetup
88Function lampSetting the function lamp1. In any mode with the exception of Voice Recording mode,press the MENU button.2. Press the LEFT/ RIGHT button and select the [Setup]menu tab.3. Select the [Lamp] menu by pressing the UP/ DOWNbutton and press the RIGHT button.4. Select a desired sub menu by pressing the UP/ DOWNbutton and press the OK button.If [Off] is selected : The function lamp will not light up.If [On] is selected : The function lamp will light up.Function DescriptionThe lamp blinks and turns off when the camera is readyto take a pictureThe lamp blinks while saving the image data and turnsoff when the camera is ready to take a pictureWhile movie recording The lamp blinks at a 1-second intervalWhile voice recording The lamp blinks at a 1-second intervalWhen the USB cable is inserted The lamp lights up Transmitting Data The lamp blinksWhile the self timer isfunctioningAfter taking a picturePower onThe lamp will function while using the self-timer even ifthe configuration is set to off the lamp. (Based on 10-second Self-timer; see p. 36)Back:Set : OKSoundUSB OffLamp OnNORSetupYou can turn on and off the function lamp located on the front of the camera.Description of the Function lamp
89Auto Focus lampLCD brightnessYou can adjust the LCD brightness.Adjusting LCD Brightness1. In any mode with the exception of Voice Recording mode,press the MENU button.2. Press the LEFT/ RIGHT button and select the [Setup]menu tab.3. Select the [LCD] menu by pressing the UP/ DOWN buttonand press the RIGHT button.4. Select a desired sub menu by pressing the UP/ DOWNbutton and press the OK button.[LCD] sub menu : Dark, Normal, Bright5. Press the menu button twice and the menu will disappear.You can turn on and off the Auto Focus lampHow to set up the lamp1. In any mode with the exception of Voice Recording mode,press the MENU button.2. Press the LEFT/ RIGHT button and select the [Setup]menu tab.3. Select the [AF Lamp] menu by pressing the UP/ DOWNbutton and press the RIGHT button.4. Select a desired sub menu by pressing the UP/ DOWNbutton and press the OK button.If [Off] is selected : The AF lamp will not light up.If [On] is selected : The AF lamp will light up.If you select [Off] menu and take an image in poorly lit conditions or select the [Night]scene mode, the camera may not take exact focus.Back:Set : OKUSBLamp OffAF Lamp OnNORSetupBack:Set : OKLamp DarkAF Lamp NormalLCD BrightNORSetup
90Selecting Video out typeThe Movie output signal from the camera can be NTSC or PAL.Your choice of output will be governed by the type of device (monitor or TV, etc.) to which thecamera is connected. PAL mode can support only BDGHI.Setting the Video Out Type1. In any mode with the exception of Voice Recording mode,press the MENU button.2. Press the LEFT/ RIGHT button and select the [Setup]menu tab.3. Select the [Video Out] menu by pressing the UP/ DOWNbutton and press the RIGHT button.4. Select a desired sub menu by pressing the UP/ DOWNbutton and press the OK button.- [Video Out] sub menu : NTSC, PAL5. Press the menu button twice and the menu will disappear.Connecting to an external monitorUsing the AV cable with Cradle : Connect the camera and the cradle. Connect the cradleto an external monitor with the supplied AV cable.Using the AV cable with Camera : Connect the camera to an external monitor with thesupplied AV cable.[Using the AV cable with Cradle][Using the AV cable with Camera]Back:Set : OKAF LampLCD NTSCVideo Out PALNORSetup
91Selecting Video out typeNTSC : U.S.A, Canada, Japan, South Korea, Taiwan, Mexico.PAL : Australia, Austria, Belgium, China, Denmark, Finland, Germany, U.K., Holland,Italy, Kuwait, Malaysia, New Zealand, Singapore, Spain, Sweden, Switzerland,Thailand, Norway.When using a TV as an external monitor, you will need to select the external or AVchannel of the TV.There will be a digital noise on the external monitor, but it is not a malfunction.If the image is not in the centre of the screen, use the TV controls to centre it.When the camera is connected to an external monitor, the menu will be visible on theexternal monitor and the menu functions are the same as those indicated on the LCDmonitor.INFORMATION
92Quick viewIf you enable Quick View before capturing an image, you can view the image you justcaptured on the LCD monitor for the duration set in the [Quick View] setup. Quick view ispossible only with still images.Setting Quick View1. In any mode with the exception of Voice Recording mode,press the MENU button.2. Press the LEFT/ RIGHT button and select the [Setup]menu tab.3. Select the [Quick View] menu by pressing the UP/ DOWNbutton and press the RIGHT button.4. Select a desired sub menu by pressing the UP/ DOWNbutton and press the OK button.[Off] : The quick view function can’t be activated.[1, 3, 5sec] : The captured image is briefly displayed during the selected time.5. Press the menu button twice and the menu will disappear.Initialisation(RESET ALL)All camera menu and function settings will be restored to their default values. However, values for DATE/TIME, LANGUAGE, and VIDEO OUT will not be changed.Initialising the Camera1. In any mode with the exception of Voice Recording mode,press the MENU button.2. Press the LEFT/ RIGHT button and select the [Setup]menu tab.3. Select the [Reset] menu by pressing the UP/ DOWNbutton and press the RIGHT button.4. Select a desired sub menu by pressing the UP/ DOWNbutton and press the OK button.If [No] is selected : Settings will not be restored to their defaults.If [Yes] is selected : All settings will be restored to their defaults.5. Press the menu button twice and the menu will disappear.Back:Set : OKLCD OffVideo Out 1 secQuick View 3 secNORSetupBack:Set : OKVideoQuick View NoReset YesNORSetup
93Setting up the MYCAM menuYou can set up a start up image, start up sound and shutter sound. Every camera workingmode (with the exception of Voice recording mode) has the MyCAM menu.The items indicated by are default settings.Menu tab Main menu Sub menu PageOff LOGOUser Image 1 User Image 2Off Sound 1Sound 2 Sound 3Off Sound 1Sound 2 Sound 3S.ImageS.SoundSH.Soundp.87p.88p.88You can select the image that is first displayed on the LCD monitor whenever the camera isturned on.Setting a Startup Image1. In any mode with the exception of Voice Recording mode,press the MENU button.2. Press the LEFT/ RIGHT button and select the [Mycam]menu tab.3. Select the [S.Image] menu by pressing the UP/ DOWNbutton and press the RIGHT button.4. Select a desired sub menu by pressing the UP/ DOWNbutton and press the OK button.5. Press the menu button twice and the menu will disappear.Start up imageUse a saved image for the start-up image with the [User Image] in the [Resize] menu inthe play mode.The start-up image will not be deleted by deleting all images or [Format] menu.INFORMATION* Menus are subject to change without prior notice.Back:Set : OKS.ImageS.SoundSH.Sound2592Mycam
94Start up soundShutter soundSetting the Startup Sound1. In any mode with the exception of Voice Recording mode,press the MENU button.2. Press the LEFT/ RIGHT button and select the [Mycam]menu tab.3. Select the [S.Sound] menu by pressing the UP/ DOWNbutton and press the RIGHT button.4. Select a desired sub menu by pressing the UP/ DOWNbutton and press the OK button.5. Press the menu button twice and the menu will disappear.You can select the sound that is activated whenever the camera is turned on.Selecting the Shutter Sound1. In any mode with the exception of Voice Recording mode,press the MENU button.2. Press the LEFT/ RIGHT button and select the [Mycam]menu tab.3. Select the [SH.Sound] menu by pressing the UP/ DOWNbutton and press the RIGHT button.4. Select a desired sub menu by pressing the UP/ DOWNbutton and press the OK button.5. Press the menu button twice and the menu will disappear.You can select the shutter sound.Back:Set : OK2592MycamS.Image OffS.Sound Sound1SH.Sound Sound2Back:Set : OK2592MycamS.Image OffS.Sound Sound1SH.Sound Sound2
95Important notesBe sure to observe the following precautions!This unit contains precision electronic components. Do not use or store this unit in thefollowing locations.- Areas exposed to severe changes in temperature and humidity.- Areas exposed to dust and dirt.- Areas exposed to direct sunlight or the inside of a vehicle in hot weather.- Environments where there is high magnetism or excessive vibration.- Areas with high explosives or highly flammable materials.Do not leave this camera in places subject to dust, chemicals (like naphthalene andmothball), high temperature and high humidity.Keep this camera with silica gel in a hermetically sealed box when not planning to use thecamera for a long period of timeSand can be particularly troublesome to cameras.- Do not let sand get inside the unit when using it on beaches, coastal dunes, or other areaswhere there is lots of sand.- Doing so may result in failure or may permanently render the unit unusable.Handling the camera- Never drop the camera or subject it to severe shocks or vibrations.- This camera is not waterproof.To avoid dangerous electrical shocks, never hold or operate the camera with wet hands.- If you use this camera in wet places, such as beach or pool, do not let water or sand getinside the camera. Doing so may result in failure or may permanently damage the unit.Extremes in temperature may cause problems.- If the camera is transferred from a cold to a warm and humid environment, condensationcan form on the delicate electronic circuitry. If this occurs, turn the camera off and wait for atleast 1 hour until all moisture is dispersed. Moisture build up can also occur in the memorycard. If this happens, turn off the camera and remove the memory card. Wait until themoisture has dispersed.
96Important notesCaution on Using the Lens- If the lens is subjected to direct sunlight, it could result in discoloration and deterioration ofthe image sensor.- Pay attention not to get fingerprints or foreign substances on the surface of the lens.If the digital camera is not used for a long period, an electric discharge can occur. It is a good idea to remove the batteries and the memory card if you do not intend using thecamera for an extended period of time.If the camera is exposed to an electronic interference, it will turn itself off to protect thememory card.Camera Maintenance- Use a soft brush (available from photo stores) to gently clean the lens and LCD assemblies.If this does not work, lens-cleaning paper with lens cleaning fluid can be used.Clean the camera body with a soft cloth. Do not allow this camera to come into contact withsolvent materials such as benzol, insecticide, thinners etc. This may damage the body shellof the camera and also affect its performance. Rough handling can damage the LCDmonitor. Take care to avoid damage and keep the camera in its protective carry case at alltimes when not in use.Do not attempt to disassemble or modify the camera.Under certain conditions, static electricity can cause the flash unit to fire. This is not harmful tothe camera and is not a malfunction.When images are uploaded or downloaded, the data transfer may be affected by staticelectricity. In this case, disconnect and re-connect the USB cable before trying the transferagain.Before an important event or going on a trip, you should check the camera condition. - Take a picture for testing the camera condition and prepare extra batteries.- Samsung cannot be held responsible for camera malfunctions.
97Warning indicatorThere are several warnings that may appear on the LCD displayCard Error !Memory card errorTurn off the camera power and turn it on againInsert the memory card againInsert the memory card and format the memory card (p.73)No Card !A memory card is not insertedInsert a memory cardThe camera can’t recognise the memory cardInsert the memory card againTurn off the camera power and turn it on againCard Locked !The memory card is lockedSD memory card : Slide the write protect switch to the top of the memory cardCard Full !There is insufficient memory capacity to take an imageInsert a new memory cardDelete unnecessary image files to free up some memoryNo Image !There are no images stored on the memory cardTake imagesInsert a memory card that is holding some imagesFile Error !File errorFormat the memory cardMemory card errorContact a camera service centreLow Battery !There is low battery capacityInsert charged battery
98Warning indicatorPlease check the followingBefore contacting a service centreLow Light !When taking pictures in dark placesUse a tripod and take pictures in Flash Photography modeSet USB[USB] sub menu and connected device are not matched.Reconfigure [USB] in the [Setup] menu. Out Of NumberWhen selecting too many printing pages in the PictBridge menu. Select printing page within the limitation. The camera doesn’t switch onThere is low battery capacityInsert charged batteryBatteries are inserted incorrectly with the reverse polaritiesInsert the batteries according to the polarity marks (+, -)The rechargeable battery is not insertedInsert the battery and turn on the cameraAn AC Power Adapter is not connectedConnect an AC Power AdapterThe camera power ceases while in useThe batteries are exhaustedInsert charged batteryThe Camera is turned off automaticallyTurn off the camera power and turn it on againAn AC Power Adapter is not connectedConnect an AC Power AdapterBatteries drain quicklyThe Camera is being used in low temperaturesKeep the camera in warm conditions (i.e. inside a coat or jacket) and only remove it inorder to take images
99Before contacting a service centreCamera does not take images when pressing the Shutter buttonThe memory card is not insertedAfter turning the camera off, insert a new memory cardThere is insufficient memory capacityDelete unnecessary image filesThe memory card has not been formattedFormat the memory card (p.82)The memory card is exhaustedInsert a new memory cardThe memory card is lockedRefer to [Card Locked !] error message (p.93)The camera’s power is offTurn the camera power onThe batteries are exhaustedInsert charged battery.Batteries are inserted incorrectly with the reverse polaritiesInsert the batteries according to the polarity marks (+, -)The camera suddenly stops working while in use The camera was stopped due to a malfunctionRemove /re-insert batteries and switch the camera onThe images are unclearA picture was taken within 0.8 m from the subject without setting an appropriate macro modeIf the subject is closer than 0.8m, select macro shot modeTaking a picture beyond the flash rangeTake a picture within the flash rangeThe lens is smudged or dirtyClean the lensThe flash does not fireFlash off mode has been selectedDis-engage flash off modeThe camera mode can’t use the flashRefer to the FLASH instruction (p.30)Incorrect date and time is displayedThe date and time have been set incorrectly or the camera has adopted the default settingsReset the date and time correctly
100Before contacting a service centreThe camera buttons do not operateCamera malfunctionRemove /re-insert batteries and switch the camera onA card error has occurred while the memory card is in the camera.Incorrect memory card formatRe-format the memory card The images don't play backIncorrect file name (Violation of DCF format)Do not change the image file nameColour of image is different to the original scene White balance setting is incorrectSelect appropriate White balanceImages are too brightExposure is excessiveReset exposure compensationNo image on external monitorThe external monitor has not been connected properly with the cameraCheck the connection cablesThere are incorrect files in the memory cardInsert a memory card that has correct filesWhen using the PC’s explorer, the [Removable Disk] file does not showCable connection is incorrectCheck the connectionThe camera is offTurn the camera onThe operating system is not Windows 98, 98SE, 2000, ME, XP/ Mac OS 9.0 ~ 10.3.Alternatively the PC does not support USBInstall Windows 98, 98SE, 2000, ME, XP/ Mac OS 9.0 ~ 10.3 to PC that supports USBThe camera driver is not installedInstall a [USB Storage Driver]
101SpecificationsType 1/2.5" CCDEffective Pixel Approx. 5.13 Mega-pixel Total Pixel Approx. 5.25 Mega-pixelSHD Lens f = 5.8 ~ 17.4mm (35mm film equivalent : 35 ~ 105 mm)F No. F2.8 ~ F4.8Still Image mode : 1.0X ~ 5.0X Play mode : 1.0X ~ 8.0X (depends on image size)LCD Monitor 1.8" colour TFT LCD (118,080 dot)Type TTL auto focusNormal : 80cm ~ infinityMacro : 5 ~ 80cm (Wide), 50 ~ 80cm (Tele)Auto Macro : 5cm ~ infinity (Wide), 50 ~ infinity (Tele)Type Mechanical and Electronic shutterSpeed 1 ~ 1/2,000 sec. (Night Scene mode : 16 ~ 1/2,000 sec.)Program AEMetering : Multi, SpotCompensation 2EV (0.5EV steps)ISO Equivalent Auto, 100, 200, 400Auto, Auto & Red-eye reduction, Fill-in, Slow sync, Off, SF.Range Wide : 0.3 ~ 3.0m, Tele : 0.5 ~ 2.0mRecharging Time Approx. 5 sec.Sharpness Soft, Normal, VividEffect Normal, B&W, Sepia, Negative, RGB Auto, Daylight, Cloudy, Fluorescent_H, Fluorescent_L,Tungsten, CustomVoice Recording (max. 1 hour)Voice Memo in Still Image (max. 10 sec.)Date Imprinting Date&Time, Date, Off (user selectable)Modes : Auto, Manual, SceneScene : Night, Portrait, Children, Landscape, Text, Close-up,Sunset, Dawn, Backlight, Fireworks, Beach/SnowContinuous : Single, ContinuousSelf-timer : 2 sec., 10 sec., Double, Remote controlWith audio (recording time : memory capacity dependent)Movie Clip Size : 640x480, 320x240, 160x128 (Digital zoom enable)Frame rate : 30 fps, 15 fpsMedia SD : up to 1GB guaranteed (MMC Compatible)Still Image : JPEG (DCF), EXIF 2.2, DPOF 1.1, PictBridge 1.0Movie Clip : avi (MPEG-4) Audio : WAV(voice memo)Image SensorLensFocal LengthRangeControlModesDigital ZoomFocusingShutterExposureFlashVoice RecordingWhite BalanceShootingStorageStill ImageFile Format
102Specifications2592 : 2592x1944, 2272 : 2272x1704, 2048 : 2048x1536, 1600 : 1600x1200, 1024 : 1024x768, 640 : 640x4802592 : Super fine 5, Fine 10, Normal 15 2272 : Super fine 6, Fine 12, Normal 192048 : Super fine 10, Fine 20, Normal 311600 : Super fine 10, Fine 20, Normal 311024 : Super fine 25, Fine 50, Normal 76640 : Super fine 64, Fine 127, Normal 194* These figures are measured under Samsung’s standardconditions and may vary depending on shooting conditionsand camera settings.Single image, Thumbnails, Slide show, Movie Clip, Album OrganisationEditing Trimming, Resizing, RotatingDigital output connector : USB 2.0, 1.1Audio : Mono Video output : NTSC, PAL (user selectable)DC power input connector : 4.2VRechargeable battery : 1 x Li-ion (SLB-1137)Adaptor : DC 4.2V, 750mA(+/-50mA) (SAC-41)* Included power source may vary depending on sales region.Dimensions (W X H X D) 103.1 X 56 X 31.4mmWeight Approx. 130.6g (without batteries and card)Operating Temperature 0 ~ 40˚COperating Humidity 5 ~ 85%Camera DriverStorage Driver (Windows98/98SE/2000/ME/XP, Mac OS 9.0 ~ 10.3)Software Arcsoft PhotoImpression, Digimax Viewer, Digimax Reader.Safety Flash modeNew type charging system(Cradle, USB cable(24pin, optional))MPEG-4 VGA 30fps Movie Clip(Embedded Editing program)Special Effect(Highlight, Composite shot, Photo Frame)Easy Mode chage button(M button)* Specifications are subject to change without prior notice.* All trademarks are the property of their respective owners.Capacity (32MB)Image SizeStorageInterfaceImage Play TypePower SourceSpecial FeaturesApplication
6806-2462SAMSUNG TECHWIN CO., LTD.OPTICS & DIGITAL IMAGING DIVISION145-3, SANGDAEWON 1-DONG, JUNGWONGU,SUNGNAM-CITY, KYUNGKI-DO, KOREA462-121TEL : (82) 31-740-8086,8088, 8090, 8092, 8099FAX : (82) 31-740-8398, 8111www.samsungcamera.comSAMSUNG OPTO-ELECTRONICS AMERICA, INC.HEADQUARTERS40 SEAVIEW DRIVE, SECAUCUS, NJ07094, U.S.A.TEL : (1) 201-902-0347FAX : (1) 201-902-9342WESTERN REGIONAL OFFICE18600 BROADWICK ST.,RANCHO DOMINGUEZ, CA 90220, U.S.A.TEL : (1) 310-900-5263/5264FAX : (1) 310-537-1566www.samsungcamerausa.comSAMSUNG OPTO-ELECTRONICS UK LIMITEDSAMSUNG HOUSE1000 HILLSWOOD DRIVEHILLSWOOD BUSINESS PARKCHERTSEY KT16 OPS U.K.TEL : 00800 12263727FAX : 002711 4619110www.samsungcamera.co.ukSAMSUNG OPTO-ELECTRONICS GMBHAM KRONBERGER HANG 6D-65824 SCHWALBACH/TS., GERMANYTEL : (49) 6196 66 53 03FAX : (49) 6196 66 53 66www.samsungcameras.deSAMSUNG FRANCE S.A.S.BP 51 TOUR MAINE MONTPARNASSE33, AV .DU MAINE75755, PARIS CEDEX 15, FRANCEHOTLINE PHOTO NUMÉRIQUE :00 800 22 26 37 27(Numéro Vert-Appel Gratuit)TEL : (33) 1-4279-2200FAX : (33) 1-4538-6858www.samsungphoto.frSAMSUNG TECHWIN MOSCOW OFFICERUSSIA, 125167, MOSCOW LENNINGRADSKY,PR-KT, 37-A, KORP14TEL : (7) 095-258-9299/96/98FAX : (7) 095-258-9297http://www.samsungcamera.ruTIANJIN SAMSUNG OPTO-ELECTRONICS CO.,LTD.7 PINGCHANG ROAD NANKAI DIST., TIANJINP.R CHINAPOST CODE:300190TEL : (86) 22-2761-8867FAX : (86) 22-2761-8864www.samsungcamera.com.cnInternet address - http : //www.samsungcamera.com/The CE Mark is a Directive conformitymark of the European Community (EC)

Navigation menu