Hanwha Techwin DIGIMAXU-CA5 Digital Camera User Manual UC2 en c V07

Samsung Techwin Co Ltd Digital Camera UC2 en c V07

Contents

Users Manual 1 of 2

Thank you for buying a Samsung Camera.This manual will guide you through using the camera, including capturing images, downloading images andusing the application software. Please read this manual carefully before using your new camera.ENGLISHUser's Manual
2InstructionsUse this camera in the following orderInsert the USB cableSet up the camera driverBefore connecting the camera to a PC, via theUSB cable, you will need to set up the cameradriver. Install the camera driver that is contained inApplication software CD-ROM. (p.90)Take a picture (p.19)* When taking a picture, you should use therechargeable battery supplied with the camera. Insert the supplied USB cable into the PC’s USBport and the camera’s USB connection terminal.(p.98)Check the camera’s power. If the power is turnedoff, press the camera button to turn it on. (p.22)Take a pictureCheck the camera’s powerCheck [Removable Disk]Open Window s EXPLORER and search for[Removable Disk]. (p.99)If you use a card reader to copy the images on the memory card to your PC, the imagescould be damaged. When transferring the images taken with the camera to your PC, be sureto use the supplied USB cable to connect the camera to your PC. Please note that themanufacturer holds no responsibility for loss or damage of images on the memory card dueto the use of a card reader.
3ContentsGetting to know your camera 5About the icons 5Danger 6Warning 6Caution 7An FCC warning 7System chart 8Identification of features 10Front & Top 10Back & Bottom 10Side/ 5-function button 11Cradle 12Movie clip mode 12Voice recording mode 12Still image mode 12Connecting to a Power Source 13Using the SAC-41(for both Charger and AC adapter) 14How to charge the rechargeable battery(SLB-1137) 14Using the batteries 17Removing the battery 17Maintenance of the memory card 18Preserving the memory card data 18Instructions on how to use the memory card19Inserting the memory card 20Removing the memory card 20When Using the Camera for the First Time21LCD monitor indicator 22Starting the recording mode 23Things to Watch Out for When TakingPictures 26Using the camera buttons to adjust thecamera 27POWER button 27SHUTTER button 27ZOOM W/T button 27Voice memo/ UP button 29Recording a voice memo 29Macro / Down button 30Focus lock 31Flash/ Left button 32Self-timer/ Remote/ Right button 35MENU/ OK button 37M button : selecting preset scene modes 38+/- button 39LCD button 43Using the LCD monitor to adjust the camera settings 44How to use the menu 46Mode 46Size 47Quality 48Metering 49Continuous shot 49Sharpness 50Effect 50Special Effect 51Special Effect : Preset focus frames 51Special Effect : Composite shots 52Special Effect : Photo Frame 51Starting play mode 55Playing back a still image 55Playing back a movie clip 56How to capture the movie clip 56Playing back a movie clip 56RECORDINGPLAYREADY
4ContentsHow to capture the movie clip 56Playing back a recorded voice 56Using the camera buttons to adjust thecamera 59Thumbnail / Enlargement button 59Voice memo / Up button 60Play & Pause/ Down button 61LEFT/ RIGHT/ MENU/ OK button 62LCD button 62Album button (M button) 63How to use the album 63Removing still images from the album 64Playing back the albums 65Delete button 66Setting up the play back function using theLCD monitor 67Starting the slide show 70Protecting images 71Deleting images 72Resize 73Rotating an image 74DPOF 74DPOF : STANDARD 75DPOF : INDEX 75DPOF : PRINT SIZE 76PictBridge 77PictBridge: Picture Selection 78PictBridge: Print Setting 79PictBridge: Printing 80PictBridge : RESET 81Setup menu 82File name 83Auto power off 84Language 85Formatting a memory card 85Setting up the Date/ Time/ Date type 86Imprinting the recording date 86Sound 87Connecting an External Device (USB) 87Function lamp 88Auto Focus lamp 89LCD brightness 89Selecting Video out type 90Quick view 92Initialisation(RESET ALL) 92Setting up the MYCAM menu 93Start up image 93Start up sound 94Important notes 95Warning indicator 97Before contacting a service centre 98Specifications 101Software Notes 88System Requirements 88About the software 89Setting up the application software 90Starting PC Mode 98Removing the USB Driver for Windows 98SE 101Removable Disk 102Removing the removable disk 103Setting up the USB Driver for MAC 104Using the USB Driver for MAC 104Digimax Viewer 2.1 105Using PhotoImpression 106Digimax Reader 107FAQ 109SETUPSOFTWARE
5Getting to know your cameraThank you for buying a Samsung Digital Camera.Prior to using this camera, please read the user manual thoroughly.When you require After Sales service, please bring the camera and the cause of the cameramalfunction (such as Batteries, Memory card etc.) to the A/S centre.Please check that the camera is operating properly prior to when you intend to use it (e.g. fora trip or an important event) to avoid disappointment. Samsung camera takes noresponsibility for any loss or damages that may result from camera malfunction.Keep the manual in a safe place.Microsoft, Windows and Windows logo are registered trademarks of Microsoft Corporationincorporated in the United States and/or other countries.All brand and product names appearing in this manual are registered trademarks of theirrespective companies.This manual contains instructions on using this camera that will help you to use this camerasafely and correctly. This will help prevent danger and injury to others.About the iconsDANGERDANGER indicates an imminently hazardous situation which, if not avoided, willresult in death or serious injury.WARNINGWARNING indicates a potentially hazardous situation, which, if not avoided,could result in death or serious injury.CAUTIONCAUTION indicates a potentially hazardous situation, which, if not avoided, mayresult in a minor or moderate injury.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. CAUTION : Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Information to the user
6DangerDo not attempt to modify this camera in any way. This may result in fire, injury, electric shockor severe damage to you or your camera. Internal inspection, maintenance and repairsshould be carried out by your dealer or Samsung Camera Service centre.Please do not use this product in close proximity to flammable or explosive gases, as thiscould increase the risk of explosion.Should any form of liquid or a foreign object enter the camera, do not use it. Switch off thecamera, and then disconnect the power source (batteries or AC Power Adapter). You mustcontact your dealer or Samsung Camera Service centre. Do not continue to use the cameraas this may cause a fire or electric shock.Do not insert or drop metallic or inflammable foreign objects into the camera through accesspoints e.g. the memory card slot and battery chamber. This may cause a fire or electricshock.Do not operate this camera with wet hands. This could pose a risk of electric shock.You should use the rechargeable battery supplied with the camera. Do not use the ACadapter and non rechargeable battery at the same time. It may cause an explosion.Do not use the flash in close proximity to people or animals. Positioning the flash too close toyour subject’s eyes, may cause eyesight damage.When taking photographs, never point the lens of the camera directly into very strong light.This may result in permanent damage to your eyesight.For safety reasons keep this product and accessories out of reach of children or animals toprevent accidents e.g.:Swallowing batteries or small camera accessories. If an accident should occur, pleaseconsult a doctor immediately.There is the possibility of injury from the camera’s moving parts.Batteries and camera may become hot during prolonged use and it may result in cameramalfunction. Should this be the case, allow the camera to sit idle for a few minutes to allow ittime to cool.Do not recharge non rechargeable batteries. This may cause an explosion. Do not leave this camera in places subject to extremely high temperatures, such as a sealedvehicle, direct sunlight or other places of extreme variances in temperature. Exposure toextreme temperatures may adversely affect the camera s internal components and couldcause a fire.When in use, do not cover the camera or AC Power Adapter. This may cause heat to build upand distort the camera body or cause a fire. Always use the camera and its accessories in awell-ventilated area.Warning
7CautionLeaking, overheating, or burst batteries could result in fire or injury.Use batteries with the correct specification for the camera.Do not short circuit, heat or dispose of batteries in fire.Do not insert the batteries with the reverse polarities. Remove the batteries when not planning to use the camera for a long period of time. Batteries may leak corrosive electrolyte and permanently damage the camera's components.Do not fire the flash while it is in contact with hands or objects. Do not touch the flash afterusing it continuously. It may cause burns.Do not move the camera while it is switched on, if you are using the AC Power Adapter. After use, always switch off the camera before unplugging the adapter from the wall socket.Then make sure that any connector cords or cables to other devices are disconnected beforemoving the camera. Failure to do so may damage the cords or cables and cause a fire orelectric shock.
8System chartPlease check that you have the correct contents before using this product. The contents canvary depending on the sales region. To buy the optional equipment, contact your nearestSamsung dealer or Samsung service centre.PouchUser manual,Product warrantyCamera strap Remote control Software CD (see p.90)SD memory card(see p.15)DPOF compatibleprinter (see p.59)Rechargeable battery(SLB-1137)Cradle SAC-41(for both Charger and AC adapter)AC cord< Included items >
9System chartPictBridge compatibleprinter(see p.63)Computer (see p.98)External monitor Yellow colour - Video,White colour - Voice(see p.83)For WindowsPC with processor better than MMX Pentium233MHz (XP : Pentium II 300MHz)Windows 98/98SE/2000/ME/XPMinimum 32MB RAM (XP : 128MB)140MB of available hard-disk spaceUSB portCD-ROM drive800x600 pixels, 16-bit colour displaycompatible monitor (24-bit colour display recommended)For MacintoshPower Mac G3 or laterMac OS 9.0 ~ 10.3Minimum 64MB RAM110MB of available hard-disk spaceUSB portCD-ROM driveQuickTime 6.01 or later for Movie ClipSystem RequirementsWhen you connect the camera to acomputer, printer or external monitor, youhave to use the USB/ Video cable suppliedwith the camera, or the external devices can'trecognise the camera.CAUTIONUSB cable(for Cradle)USB cable(for Camera)AV cable (for Cradle)AV cable (for Camera)
10Identification of featuresFront & TopBack & BottomFlashRemotecontrol sensorLensPower buttonAuto Focus lampSpeakerMicrophoneShutter buttonMode switchLCD monitorLCD buttonStrap eyeletZoom T button(Digital zoom)Zoom W button(Thumbnail)Play mode button Tripod socketDC/USB/AVconnection terminal/Cradle connector+/-, DELETEbuttonM button (Album button)Function lamp & Self-timer lamp
11Identification of featuresFrontTopYou can recharge your rechargeable battery, print a captured image and download imageswith the cradle. (Refer to page 00 and 00)Battery holderMemory card slotBattery chamberBattery chamber coverFLASH/LEFT buttonMENU/ OK buttonMacro / DOWN buttonPlay & Pause buttonSELF-TIMER/RIGHT buttonVoice memo/ UP buttonSide/ 5-function buttonCradleCamera connectionterminalUSB portAV connection terminalDC inputconnection point
12Identification of featuresStill image modeYou can select from AUTO( ), MANUAL( ) orSCENE mode. In SCENE mode, you can select the NIGHT,PORTRAIT, CHILDREN, LANDSCAPE, CLOSE UP, TEXTRECOGNITION, SUNSET, DAWN, BACKLIGH,FIREWORKS and BEACH&SNOW scene menu.Voice recording modeA movie clip can be recorded for as long as the availablerecording time of the memory capacity allows.Image size and type are listed below.- Image size : 640X480, 320X240, 160X128 (user selectable) - Movie clip file type : *. avi(MJPEG-4)A voice recording can be recorded for as long as the availablerecording time of the memory capacity allows. (Max: 1 hour)- File type : *.wavMovie clip modeYou can select the desired working mode by using the mode switch located on the top of thecamera. This digital camera has 3 recording modes. These are listed below.
13Identification of featuresMode iconsFunction lamp & Self-timer lampFunction DescriptionPower on The lamp blinks and turns off when the camera is ready to take a pictureThe lamp blinks while saving the image data and turns off when thecamera is ready to take a pictureWhile movie recording The lamp blinks at a 1-second intervalWhile voice recording The lamp blinks at a 1-second intervalThe lamp lights up Transmitting Data The lamp blinksFor the first 7 seconds, the lamp blinks at 1 second intervals.For the final 3 seconds, the lamp blinks quickly at 0.25 second intervals.* The lamp will function while using the self-timer even if the configurationis set to off the lamp. (Based on 10-second Self-timer; see p. 36)While the self timer is functioningWhen the USB cable isinsertedAfter taking a pictureMODE MOVIE CLIPVOICE RECORDINGAUTO MANUAL PLAYICONNIGHT PORTRAIT CHILDRENLANDSCAPECLOSE UP TEXTICONMODE SUNSET DAWN BACKLIGHTFIREWORKSBEACH&SNOW-ICON -MODESCENE
14Connecting to a Power SourceIf you have access to a mains supply, using an SAC-41 (for both Charger and AC adapter)allows the camera to be used for long periods of time.Plug the SAC-41 (for both Charger andAC adapter) into the connection point (DC IN 4.2V) on the camera. * Insert the rechargeable batteries when using an AC adapter.Using the SAC-41(for both Charger and AC adapter)[Using the AC adapter with Cradle] [Using the AC adapter with Camera]Important information about battery usageWhen the camera is not used, turn off the camera power.Do not use the non rechargeable batteries. It may cause an explosion.Please remove the batteries if the camera will not be used for long periods.Batteries can lose power over time and are prone to leaking if kept inside the camera.Low temperatures (below 0°C) can affect the performance of the batteries and you mayexperience reduced battery life.Batteries will usually recover at normal temperatures.During extended use of the camera, the camera body may become warm. This is perfectly normal.INFORMATIONYou should use the rechargeable battery (SLB-1137) supplied with the camera. Do not usethe AC adapter and non rechargeable battery at the same time. It may cause an explosion.
15Connecting to a Power SourceCharging with the camera- Insert the rechargeable battery into thebattery chamber. - Put the SAC-41 (for both Charger and ACadapter) into the socket and DC inputconnection point of the camera.Always turn off the power before taking the SAC-41 (for both Charger and AC adapter)out of the mains supply.As with all mains powered devices, safety is important. Ensure that neither the cameranor adapter comes into contact with water or metallic materials.Please ensure that you use the SAC-41 (for both Charger and AC adapter) or TTAstandardized chargers with the correct specification for the camera. Failure to do so mayaffect your warranty.Do not use the flash frequently or take many pictures with the fully dischargedrechargeable battery charged for a short time. Even if the charger is inserted, the camerapower may be turned off because the rechargeable battery is discharged again. DANGERCharging with the cradle- Insert the rechargeable battery into thebattery chamber. - Place the camera correctly in the cradle.- Put the SAC-41 (for both Charger and ACadapter) into your power socket and DCinput connection point of the camera.How to charge the rechargeable battery (SLB-1137)
16Connecting to a Power SourceIf the charging LED of the SAC-41 does not turnon or blink after inserting the rechargeable battery,please check whether the batteries are insertedcorrectly.Important information about battery (SLB-1137) chargingCharging LEDIf there is a charging error, please check all the power connections are in place.All of the chargers (24 pin) have been tested in accordance with TTA (TelecommunicationTechnology Association) can be used as AC adapter. We recommend the SAC-41(for bothCharger and AC adapter). Failure to do so may affect your warranty. You can charge the battery with a USB charging cable(TTA standardized 24 pin cable) byconnecting a PC, but the charging time will be longer than using SAC-41. (About 3 hours)If you use the USB charging cable (TTA standardized 24 pin cable) as a power cable, pleaseinsert the SLB-1137 rechargeable battery first. The USB charging cable (TTA standardized 24 pin cable) is optional. Charging time (When the camera is turned off)- Using the cradle : About 150MIN- Using the SAC-41 : About 150MIN- Using the USB charging cable (TTA standardized 24 pin cable) : About 180MIN or longer.(The charging time may vary depending on the manufacturers.)Status Using the cradle Direct to the cameraBeing Charged Red LED is on Red LED is onCharging is complete Green LED is on Green LED is onCharging error Red LED is off or blinking Red LED is off or blinkingChargingLED
17Connecting to a Power SourceUsing the batteries : If the camera does not turn on after you have inserted batteries,please check whether the batteries are inserted with the correctpolarity(+/-).1. Open the battery chambercover by pushing in thedirection of the arrow.2. Insert the batteries takingnote of the polarity (+ / -).3. To close the batterychamber cover, push ituntil it clicks.Battery statusBattery indicatorThe batteries are fullycharged Prepare new batteriesThere is no battery capacity.Replace with new batteries.There are 3 indicators for battery condition that are displayed on the LCD monitor.Removing the battery1. Turn off the camera power. Open the battery chambercover and move the battery holder aside. The battery willbe released.2. Take out the battery and close the battery chamber cover.When the battery chamber cover is opened, do not press the battery chamber cover byforce. This may cause the battery chamber cover modification or breakage. INFORMATION
18Instructions on how to use the memory cardBe sure to format the memory card (see p.72) if you are using a newly purchased memory forthe first time, if it contains data that the camera cannot recognise, or if it contains imagescaptured with a different camera.Turn off the camera power whenever the memory card is being inserted or removed.Repeated use of the memory card will eventually reduce the memory card’s performance.Should this be the case, you will need to purchase a new memory card. Wear and tear on the memory card is not covered by the Samsung warranty.The memory card is an electronic precision device. Do not bend, drop or subject the memory card to any heavy impact.Do not store the memory card in an environment with strong electronic or magnetic fields,e.g. near loud speakers or TV receivers.Please do not use or store in an environment where there are extremes in temperature.Do not allow the memory card to become dirty or to come into contact with any liquid. Should this happen, clean the memory card with a soft cloth.Please keep the memory card in its case when not in use.During and after periods of extended use, you may notice that the memory card is warm. This is perfectly normal.Do not use a memory card that is used in another digital camera.To use the memory card in this camera, format first the memory card by using this camera. Do not use a memory card formatted by another digital camera or memory card reader.Maintenance of the memory cardPreserving the memory card dataIf the memory card is subjected to any of the following, the recorded data may becomecorrupted :- When the memory card is used incorrectly.- If the power is switched off or the memory card is removed while recording, deleting(formatting) or reading.Samsung cannot be held responsible for lost data.It is advisable to copy important data onto other media as back-up e.g. floppy disks, harddisks, CD etc.If there is insufficient memory available : If you press the shutter button for the shot, a [Card Full !] message will appear and the camera will not operate. To optimise the amount ofmemory in the camera, replace the memory card or delete unnecessary images stored onthe memory.
19Instructions on how to use the memory cardDon't remove the memory card when the function lamp is blinking as this may causedamage to data in the memory card.INFORMATION[ SD (Secure Digital) memory card ]WriteprotectswitchLabelCardpinsThe camera can use SD Memory Cards and MMC (Multi Media Cards). Please consult theenclosed manual for using the MMC Cards.The SD memory card has a write protect switchthat prevents image files from being deleted orformatted. By sliding the switch to the bottom ofthe SD memory card, the data will be protected.By sliding the switch to the top of the SDmemory card, the data protection will becancelled. Slide the switch to the top of the SDmemory card before taking a picture.When using a 32MB SD memory card, the specified shooting capacity will be as follows.These figures are approximate as image capacities can be affected by variables such assubject matter.Recorded image size S. Fine Fine Normal 30FPS 15FPS2592X1944 9 18 29 - -2272X1704 10 24 38 - -2048X1536 16 36 58 - -1600X1200 36 67 117 - -1024X768 36 67 117 - -640X480 72 121 214 - -640X480 - - - 35SEC 20SEC320X240 - - -1MIN 25SEC44SEC160X128 - - -1MIN 25SEC44SECStillimageMovieclip
20Inserting the memory card3. To close, push the battery chamber cover until you heara click. If the memory card does not slide in smoothly,do not attempt to insert it by force. Check the direction ofinsertion, and then insert it correctly. Do not insert thememory card the wrong way round. Doing so maydamage the memory card slot.2. Have the front of the memory card facing toward thefront ofthe camera (lens) and the card pins toward theback of the camera (LCD monitor), and then push thememory card into the card slot until you hear a click.1. Turn off the camera’s power and pull the batterychamber cover in the direction of the arrow to open.1. Turn the power off using the power button.Open the battery chamber cover and press the memorycard as shown in the image and release.2. Remove the memory card and close the batterychamber cover.Removing the memory card
21When Using the Camera for the First TimeIf the camera is turned on for the first time, a menu will be displayed to set date, time andlanguage in the LCD monitor. This menu will not be displayed after setting up the date, timeand language. Set up the date, time and language before using this camera. Setting up the date, time and date type1. Select the [D & Time] menu by pressing the UP/DOWNbutton and press the RIGHT button.2. Select the desired sub menu by pressing the UP/DOWN/ LEFT/ RIGHT button.RIGHT button : selects YEAR/ MONTH/ DAY/HOUR / MINUTE/DATE TYPELEFT button : Moves the cursor to the [D & Time]main menu if the cursor is at thefirst item of the date and time setup. In all other instances, the cursorwill be shifted to the left of its current position.UP/ DOWN button : changes the value of each item.You can select 18 languages. These are listed below: English, Korean, French, German, Spanish, Italian, S. Chinese, T. Chinese, Japanese,Russian, Portuguese, Dutch, Danish, Swedish, Finnish, Thai, Malaysian and Arabic. Even if the camera is restarted, the language setting will be maintained.INFORMATIONSetting up the language1. Select the [Language] menu by pressing the UP/DOWNbutton and press the RIGHT button.2. Select the desired sub menu by pressing the UP/DOWN button and press the OK button. When the settings are complete, press the MENUbutton twice to exit the menu screen.SetupD&TIME 05/ 01/ 01Language EnglishMove : Set : OKSetupD&TIME 05/ 01/ 01Language EnglishMove : Set : OK
22LCD monitor indicatorThe LCD monitor displays information about the shooting functions and selections.[Image & Full Status]152592 01:00 PM2005/01/01No. Description Icons Page1Batteryp.153Continuous shot4Flashp.345Self-timerp.366 Voice memop.317 Macrop.328 Meteringp.509 Sharpnessp.5110Auto focus frame11Camera shake warning12 Date/ Time2005/01/01 01:00 PMRecording mode2p.12~13
23LCD monitor indicatorStarting the recording modeRecording a Movie clip1. Insert the batteries (p.15). Insert the batteries taking note of the polarity (+ / -).2. Insert the memory card (p.18).3. Close the battery chamber cover.4. Press the power button to turn on the camera.(If the date/time that is displayed on the LCD monitor isincorrect, reset the date/time before taking a picture.)5. Select the MOVIE CLIP( ) mode by sliding the modeswitch.6. Point the camera towards the subject and compose theimage by using the LCD monitor.7. Press the shutter button to take a movie clip.Press the shutter button once and movie clips arerecorded for as long as the available recording timeallows. Movie clips will still be recorded if the shutterbutton is released. If you wish to stop recording, pressthe shutter button again. Image size and type are listed below.- Image size: 640X480, 320X240, 160X128 (Selectable)- File type : *. avi(MJPEG-4)00:00:29640[ MOVIE CLIP mode ]13 Exposure compensationp.3914White Balancep.4015 ISO p.4116 RGB p.5117 Image qualityp.4918Image size2592, 2272, 2048, 1600, 1024, 640 p.48Number of available shots remaining15Remaining time (Movie clip/ Voice recording)00:01:30/ 01:00:0020Optical/ Digital zoom bar19
24Starting the recording modePausing while recording a movie clip (Successive Recording)This camera allows you to temporarily stop during unwanted scenes, while recording a movieclip. Using this function, you can record your favourite scenes into a movie clip without havingto create multiple movie clips.Using Successive RecordingSteps from 1-6 are the same as those for MOVIE CLIPmode.7. Point the camera towards the subject and compose theimage by using the LCD monitor. Press the shutterbutton and movie clips are recorded for as long as theavailable recording time. Movie clips will still be recordedif the shutter button is released.8. Press the Pause button ( ) to pause recording.9. Press the Pause button ( ) again to resume therecording.10. If you wish to stop recording, press the shutter button again.00:00:29640[Successive recording of a movie clip]
25Starting the recording modeRecording a still imageSteps from 1-4 are the same as those for recording amovie clip.5. Select the STILL IMAGE( ) mode by sliding themode switch.6. Point the camera towards the subject and compose theimage by using the LCD monitor.7. Press the shutter button to capture an image.152592 01:00 PM2005/01/01If the auto focus frame turns to red when you press the shutter button down half way, itmeans that the camera cannot focus on the subject. Should this be the case, the camerais unable to capture an image clearly.INFORMATIONA distance of 40cm between you and the camera (microphone) is the best distance torecord sound.INFORMATIONRecording VoiceSteps from 1-4 are the same as those for recording amovie clip.5. Select the VOICE RECORDING( ) mode bysliding the mode switch.6. Press the shutter button to record a voice.- Press the shutter button once and voice is recorded foras long as the available recording time(Max : 1 hour)allows. The recording time will be displayed on theLCD monitor.- Voice will still be recorded if the shutter button isreleased.- If you wish to stop recording, press the shutter buttonagain.- File type : *.wav01:04:33[ VOICE RECORDING mode ][ Still image mode ]Start:Shutter
26Things to Watch Out for When Taking PicturesPressing the shutter button down half way Lightly press the shutter button to confirm focus and flash battery charge. Press the shutter button all way down to take the picture.The available recording time may vary depending on shooting conditions and camerasettings.When the Flash Off or Slow synchro mode is selected in a low lighting condition, the camerashake warning indicator ( ) may appear on the LCD monitor. In this case, use a tripod,support the camera on a solid surface or change the flash mode to flash shot mode.Backlight compensated shots : When taking an outdoor shot, avoid facing the sun, as theimage may be dark because of the strong backlight. To take a picture against the sun, please use the [Backlight] inthe scene shooting mode (see page 50), Fill-in flash (see page32), Spot metering (see page 46), or Exposure compensation(see page 38).Avoid obstructing the lens or the flash when you capture an image.As there can be some differences between what is seen through the Viewfinder and theresulting image when taken at a range closer than 1.5m, it is recommended that you use theLCD monitor to compose these shots.- When photographing a subject that has little contrast.- If the subject is highly reflective or shiny.- If the subject is moving at high speed.- When there is strong reflected light, or when the background is very bright.- When the subject matter has only horizontal lines or the subject is very narrow (such as a stick or flagpole).- When the surroundings are dark[ Lightly press the shutter button ] [ Press the shutter button ]
27Using the camera buttons to adjust the cameraThe RECORDING(STILL IMAGE, VOICE RECORDING, MOVIE CLIP) mode function canbe set up by using the camera buttons.POWER buttonSHUTTER buttonIf the menu is not displayed, this button works as theOPTICAL ZOOM or DIGITAL ZOOM button. If the menu is displayed in Still Image mode, pressing theZOOM W/T button will skip 5 menu tabs at a time. ZOOM W/T buttonUsed for turning the camera’s power on / off.If there is no operation during the specified time, thecamera's power will be turned off automatically to savebattery life. Refer to page 70 for more information about theauto power off function.Pressing the power button for over 3 seconds willdeactivate the start-up sound and sound function.Used for taking an image or recording voice in theRECORDING (STILL IMAGE, VOICE RECORDING,MOVIE CLIP) mode.In MOVIE CLIP mode Pressing the shutter button down fully starts the process forrecording a movie clip. Press the shutter button once andthe movie clip is recorded for as long as the availablerecording time in the memory allows. If you wish to stoprecording, press the shutter button again.In STILL IMAGE modePressing the shutter button down halfway activates the autofocus and checks the condition ofthe flash. When the flash is charging, a flash mode icon (red colour) will blink on the LCD monitor.Pressing the shutter down fully takes the image and stores the relevant data regarding theshot. If you select voice memo recording, the recording will start after the camera hasfinished storing the image data.
28ZOOM W/ T buttonThis camera has a 3X optical zoom and a 5X digital zoom function. Using both will offer atotal zoom ratio of 15X.TELE ZoomOptical zoom TELE : Pressing the ZOOM T button. This will zoom into the subject i.e.the subject will appear nearer.Digital zoom TELE : When the maximum (3X) optical zoom is selected, pressing theZOOM T button activates the digital zoom software. ReleasingZOOM T button stops the digital zooming at the required setting. Once the maximum digital zoom (5X) is achieved, pressing theZOOM T button will have no effect.152592 01:00 PM2005/01/01152592 01:00 PM2005/01/01152592 01:00 PM2005/01/01[ WIDE zoom ] [ TELE zoom ] [ Digital zoom 5.0X ]Pressing theZOOM T buttonPressing theZOOM T buttonWIDE ZoomOptical zoom WIDE : Pressing the ZOOM W button. This will zoom out from the subjecti.e. the subject will appear further away. Pressing the ZOOM Wbutton continuously will set the camera to its minimum zoomsetting i.e. the subject appears at its furthest from the camera.Digital zoom WIDE : When the digital zoom is in operation, pressing the ZOOM Wbutton will reduce the digital zooming in steps.Releasing ZOOM W button stops digital zooming.Pressing the ZOOM W button will reduce the digital zoom andthen it will continue to reduce the optical zoom until the minimumsetting is reached. 152592 01:00 PM2005/01/01152592 01:00 PM2005/01/01152592 01:00 PM2005/01/01[ TELE zoom ][ Optical zoom 2X ][ WIDE zoom ]Pressing theZOOM W buttonPressing theZOOM W button152592 01:00 PM2005/01/01152592 01:00 PM2005/01/01152592 01:00 PM2005/01/01[ Digital zoom 5.0X ] [ TELE zoom ] [ WIDE zoom ]Pressing theZOOM W buttonPressing theZOOM W buttonOptical zoomDigital zoom
29ZOOM W/ T buttonTo use the digital zoom the LCD monitor has to be turned on.Images taken using the digital zoom may take a little longer for the camera to process.Allow time for this to take place.The digital zoom cannot be used in movie clip shots.You may notice a decrease in image quality when using the digital zoom.Take care not to touch the lens to avoid taking an unclear image and possibly causingcamera malfunction.If the image is dim, turn the camera power off and on again to modify the lens position.Take care not to press the lens as this may cause a camera malfunction.When the camera is turned on, take care not to touch the camera’s moving lens parts asthis may cause the resulting image to be dim and unclear.Take care not to touch the lens during zoom operation as this may cause damage.INFORMATIONVoice memo( ) / UP buttonWhile the menu is showing, press the UP button to move up the submenu cursor.When the menu is not displayed on the LCD monitor, the UP button operates as the voicememo( ) button. You can add your voice-over to a stored still image.Recording a voice memo1. Select the STILL IMAGE mode by sliding the mode switch.2. Press the VOICE MEMO( ) button. If the voice memo indicator is displayed on theLCD monitor, the setting is completed.[ Recording Voice Memo ]152592[ Preparing for Voice Memo ]152592 01:00 PM2005/01/01Stop:Shutter
30Voice memo( ) / UP button3. Press the shutter button and take a picture. The picture is stored on the memory.4. Voice memo will be recorded for ten seconds from the moment the picture is stored. In the middle of the voice recording, pressing the shutter button will stop the voice memo.A distance of 40cm between you and the camera (microphone) is the best distance torecord sound.INFORMATIONWhen the macro mode is selected, it is possible that camera shake will occur. If this is the case, use a tripod to eliminate this.When you take a picture within 30cm(MACRO focus), select the FLASH OFF mode.INFORMATIONWhile the menu is showing, press the DOWN button to move from the main menu to asubmenu, or to move down the submenu cursor.When the menu is not showing, you can use the MACRO/ DOWN button to take macropictures (within the distance range of 5-80 cm).The auto macro function will be activated automatically in the AUTO mode. Types of focus modes and focus ranges (W: Wide, T: Tele) (Unit : cm)Macro( ) / Down buttonFocus type AutoFocus range 80 ~ Infinity W : 5 ~ 80 T : 50 ~ 80 W : 5 ~ Infinity T : 50 ~ Infinity152592 01:00 PM2005/01/01152592 01:00 PM2005/01/01[Auto macro][Macro]Macro( ) Auto macro
31Macro( ) / Down button (Focusing)Focus lockTo focus on the subject positioned outside of the centre, use the focus lock function.Using the Focus Lock1. Ensure the subject in the centre of the autofocus frame.2. Press the SHUTTER button halfway. When the green auto focus frame lights up, it meansthe camera is focused on the subject. Be careful not to press the SHUTTER button all theway down to avoid taking an unwanted picture.3. With the SHUTTER button still pressed down only halfway, move the camera torecompose your picture as desired, and then press the SHUTTER button completely totake the picture. If you release your finger from the SHUTTER button, the focus lockfunction will be cancelled.1. The image to be captured.152592 01:00 PM2005/01/012. Press the SHUTTER buttonhalfway and focus on thesubject.152592 01:00 PM2005/01/013. Recompose the pictureand fully depress theSHUTTER button.152592 01:00 PM2005/01/01Available focusing method, by recording mode ( O : Selectable , X : Not selectable, ∞: Infinity focus range)OXOOXOXOXSCENEOOO∞XX∞∞O∞OXXXXOXXXXXXXXXXXOXXXXXModeAutoMacroAuto macroAutoMacroAuto macroMode
32Flash ( ) / Left button[ Selecting the Auto flash ]Flash range (Unit : m)When the menu is displayed on the LCD monitor, pressingthe LEFT button makes the cursor shift to the left tab.When the menu is not displayed on the LCD monitor, theLEFT button operates as the FLASH ( ) button.Selecting the flash mode1. Slide the mode switch to the STILL IMAGE mode.2. Press the Flash button until the desired flash modeindicator displays on the LCD monitor. 3. A flash mode indicator will be displayed on the LCD monitor. Use the correct flash to suitthe environment.When the flash is charging, a flash mode icon (red colour) will blink on the LCD monitor. Using the flash frequently will reduce the life of the batteries.Under normal operating conditions the charging time for the flash is normally within 7seconds. If the batteries are weak, the charging time will be longer.During the continuous shot, movie clip mode, the flash function will not operate.Take photographs within the flash range.The image quality is not guaranteed if the subject is too close or highly reflective.The LCD monitor is turned off for a while after using the flash to recharge it.INFORMATIONAutoWIDE TELE WIDE TELE WIDE TELE0.8 ~ 3.0 0.8 ~ 2.0 0.2 ~ 0.8 0.5 ~ 0.8 0.2 ~ 3.0 0.5 ~ 2.0 Macro Auto macroISOAuto
Icon Flash mode Description 33Flash ( ) / Left buttonFlash mode indicatorIf the subject or background is dark, the camera flash will operateautomatically.Auto flashAuto &Red eyereductionFill in flash Slow synchroSF(Safety Flash)Flash offIf a subject or background is dark, the camera flash will workautomatically and will reduce the red-eye effect by using the red-eye reduction function.The flash will operate in conjunction with a slow shutter speed inorder to obtain the correct exposure. We recommend using atripod for this function. When you take an image in a condition withpoor light, the camera shake warning indicator ( ) will displayon the LCD monitor.The flash fires regardless of available light. The intensity of the flash will be controlled, according to theprevailing conditions. The brighter the background or subject is,the less intense the flash will be.The flash does not fire. Select this mode when capturing images ina place or situation where flash photography is prohibited. Whenyou capture an image in a poorly lit condition, the camera shakewarning indicator ( ) will display on the LCD monitor.In poor light conditions, Safety Flash will help you get a goodimage without the use of a flash.
34Flash ( ) / Left buttonThings to watch out for when using the SF(Safety Flash)1. You can use the SF in the AUTO and MANUAL mode. 2. If you take a moving subject, there may be an afterimage in the captured image. 3. We recommend that you use the SF in a fluorescent lighting condition. 4. If the lighting condition is darker than fluorescent lighting condition, [Low light] message willdisplay. In this condition, use the correct flash to get a fine image. 5. If the lighting condition is brighter than fluorescent lighting condition, the SF doesn’tactivate.6. As the SF uses the camera’s digital processor, images taken using the SF may take a littlelonger for the camera to process. Available flash mode, by recording modeXXOX XX XXXXXX XXXOOX OO XXXX XX XXXOOX OO XXXX XX XXXXOX XX XXXXXOXXXXOOXX XXXXXXXXOOO O OO OOOO OX OO
35Self-timer( ) / Remote ( )/ Right buttonWhen the menu is displayed on the LCD monitor, pressing the Right button makes the cursorshift to the right tab. The right button can also be used to move to a sub menu to select adifferent setting.When the menu is not displayed on the LCD monitor, the RIGHT button operates as the Self-timer ( ) and Remote ( ) button. This function is used when the photographer wouldalso like to be in the image.Using the self-timer and remote control.1. Slide the mode switch to the STILL IMAGE or MOVIECLIP mode.In VOICE RECORDING mode, only the remote controlcan be used. 2. Press the SELF-TIMER button until the desired modeindicator displays on the LCD monitor. A self-timer iconor remote control icon appears on the LCD monitor.- Selecting a self-timer : When you press the SHUTTER button, the picture will be taken afterthe specified time has elapsed and the self-timer function will becancelled.- Selecting a remote mode: Pressing the shutter button of remote control will allow an interval of 2seconds before the image is taken. In the remote mode, the shutterbutton of the camera can’t be activated. After taking a picture, theremote mode will be maintained. But, pressing the power button andsliding the mode switch will cancel the remote mode.152592 01:00 PM2005/01/01152592 01:00 PM2005/01/01[ Selecting the 2 SEC self-timer ] [ Selecting the remote control ]Description of Self-timer/Remote modeIcon Mode Description2sPressing the shutter button will allow an interval of 2 seconds before the image is taken.10sPressing the shutter button will allow an interval of 10 seconds before the image is taken.A picture will be taken after about 10 seconds and 2 seconds later asecond picture will be taken.Remote modeYou can take a picture by remote control instead of using the shutter button of the camera.Double
36Self-timer( ) / Remote ( )/ Right button[Remote controlshutter button]Range for taking a picture with the remote controlWhen you take a picture with the remote control, refer tothe illustration shown alongside. Replacing batteries for the remote controlMake sure the + polarity is toward the top and the - polarity is toward the bottom whileinstalling batteries for the remote control.Replace batteries for the remote control in the local service centre.Use the CR 2025 3V batteries.If you operate the Mode switch and Self-timer button during the self-timer operation, theself-timer function is canceled.Use a tripod to prevent the camera from shaking.While the remote control icon is selected, the self-timer lamp in front of the camera blinksin 1 second cycle.INFORMATION
37MENU/ OK button[Menu on][Menu off]MENU button- When you press the MENU button, a menu related to each camera mode will be displayedon the LCD monitor. Pressing it again will return the LCD to the initial display.- A menu option can be displayed when the following are selected :MOVIE CLIP and STILL IMAGE mode. There is no menu available when the VOICERECORDING mode is selected.OK button- When the menu is displayed on the LCD monitor, this button is used for shifting the cursorto the sub menu or for confirming data.ModeAutoManualScenePressing theMENUbutton2592
38M button : selecting preset scene modesYou can use the M button to select the AUTO, MANUAL andSCENE mode. This button will operate only in the still image modeYou can easily configure optimal settings for a variety of shooting situations by selecting thescene sub menus.How to use the M button1. Press the M button in the still image mode, and a menuwindow will display shown alongside. 2. Select a desired camera mode by pressing theUp/Down/Left/Right buttons.- Up/Down button : Selecting a camera mode- Left/ Right button : Selecting a sub menu of the scenemode3. Press the OK button and the desired camera mode will be selected. 1. Press the M button in the still image mode. 2. Select the [Scene] menu by pressing the Up/Down button.3. Select a desired sub menu by pressing the Left/Right button. 4. Press the OK button and the desired camera mode will beselected.Sub menu Icon DescriptionNight Use this for shooting still images at night or in other dark conditions.Portrait To take a picture of a person.Children To take a still picture of moving children.Landscape Scenery with green woods or blue sky.Close up Close-up shooting for small objects such as plants and insects.Text Use this mode to shoot a document.Sunset For taking pictures of sunsets.Dawn Daybreak scenes.Backlight Portrait without shadows caused by backlight.Firework Firework scenes.Beach&Snow For ocean, lake, beach and snowscape scenes.Set:OK/MNightSET:OK/MAUTO
39+/- button152592RGB : Allows the user to adjust the R (Red), G (Green), and B (Blue) values of the images tobe captured. Setting RGB Values1. Press the +/- button, and then use the UP and DOWNbuttons to select the RGB icon ( ). The RGB menu bar will appear as shown.2. Use the UP/ DOWN/ LEFT and RIGHT buttons to selectthe desired RGB value.- Up/Down Button : Navigates between R, G, and Bicons.- Left/Right Button : Changes value of each icon.3. When you press the +/- button again, the value you set will be saved and RGB setupmode will end.You can use the +/- button to adjust the values for the RGB, ISO, white balance, exposurecompensation and Long Time shutter speed.Main menu Sub menu Available camera modeRGB R (Red), G (Green), B (Blue)ISO AUTO, 100, 200, 400WHITE BALANCEExposure compensation -2.0 ~ 0.0 ~ +2.0 (0.5EV steps)LT Shutter speed / Aperture Value(Changed by zoom rate)AUTO, DAYLIGHT, CLOUDY,FLUORESCENT H, FLUORESCENT L,TUNGSTEN, CUSTOM.
40+/- buttonSelecting an ISO Sensitivity1. Press the +/- button, and then use the UP and DOWNbuttons to select the ISO icon( ). The ISO menu barwill appear as shown.2. Use the LEFT and RIGHT buttons to select the desiredISO sensitivity value.- AUTO : The camera's sensitivity is automaticallychanged by variables such as lightingvalue or subject brightness.- 100, 200, 400: You can increase the shutter speed while the same amount of light ispresent, by increasing the ISO sensitivity. However, the image may besaturated in high luminance. The higher the ISO value, the higher thecamera’s sensitivity to light is and therefore the greater its capacity to takepictures in dark conditions. However, the noise level in the image willincrease as the ISO value increases, making the image appear coarse.3. When you press the +/- button again, the value you set will be saved and ISO setup mode will end.152592Selecting a White Balance1. Press the +/- button, and then use the UP and DOWNbuttons to select the white balance icon ( ).The white balance menu bar will appear as shown.2. Use the LEFT and RIGHT buttons to set the whitebalance to the desired value. The value you set will bedisplayed on the LCD monitor.AUTO : The camera automatically selectsthe appropriate white balancesettings, depending on the prevailing lighting conditions.DAYLIGHT : For taking images outside.CLOUDY : For taking images under a cloudy and overcast sky.Fluorescent H : For shooting under daylight fluorescent types of three-wayfluorescent lighting.Fluorescent L : Shooting under white fluorescent lighting.TUNGSTEN : For shooting under tungsten (standard light bulb) lighting.CUSTOM : Allows the user to set the white balance according to the shootingcondition.Different lighting conditions may cause a colour cast on your images.3. Press the +/- button again. The value you set will be saved and White Balance setup modewill end.152592ISO : You can select the ISO sensitivity when taking pictures.The speed or specific light-sensitivity of a camera is rated by ISO numbers.White balance : The white balance control allows you to adjust the colours to appear morenatural looking.
41+/- button152592Using the Custom White BalanceWhite balance settings may vary slightly depending on the shooting environment. You can select the most appropriate white balance setting for a given shooting environmentby setting up the custom white balance.1. Select the CUSTOM ( ) menu of the WhiteBalance.2. Place a sheet of white paper in front of the camera sothat the LCD monitor shows only white, and then pressthe SHUTTER button.3. Your custom white balance value is stored.- The custom white balance value will be applied,starting with the next picture you take.- The user configured white balance will be remaineffective until it is overwritten.[ White paper ]MEASURE : SHUTTER152592Exposure compensation : This camera automatically adjusts the exposure according to theambient lighting conditions. You can also select the exposure value by using the +/- button.Compensating Exposure1. Press the +/- button, and then use the UP and DOWNbuttons to select the exposure compensation icon ( ). The exposure compensation menu bar willappear as shown.2. Use the LEFT and RIGHT buttons to set the desiredexposure compensation factor.3. Press the +/- button again. The value you set will besaved and the Exposure Compensation setup mode willclose. If you change the exposure value, the exposure indicator ( ) will be displayedon the bottom of the LCD monitor.* A negative exposure compensation value reduces the exposure. Note that a positive exposure compensation value increases the exposure and the LCDmonitor will appear white or you may not get good pictures.
42+/- button152592Long Time shutter : This camera automatically adjusts the shutter speed and aperture valuesto the shooting environment. However, in NIGHT SCENE mode, you canset the shutter speed and aperture values to your preference.Adjusting the shutter speed and aperture values1. Select the [Night] scene mode. (M button [Scene] [Night])2. Press +/- button and Long Time shutter menu(LT, For selecting shutter speed and aperture value) willbe displayed.3. Configure the Long Time shutter value with the up/down/ left/ right button.Up/ Down Button : Select the iris / shutter speedLeft/ Right Button : Change the value. Available iris value options, depending on zoom stepwill be displayed on the menu.4. Press the +/- button again. The value you set will be saved and the mode will switch toNIGHT SCENE mode. Press the SHUTTER button to take the picture.(Press left button)Aperture Value SmallLarge(Press right button)Shutter SpeedFast(Press left button)Slow(Press right button)Aperture values and shutter speeds changed by zoom scale are listed below.F 2.81 S Supported Aperture Values : AUTO, WIDE : F2.8 ~ F5.8, TELE : F4.8 ~ F10.0Supported Shutter Speeds : AUTO, 1 ~ 16S
43LCD button15 152592 01:00 PM2005/01/01152592 01:00 PM2005/01/01[Full Information Mode] [Basic Information Mode] [Power save mode]You can check the recording status in the LCD monitor. In any mode with the exception of VOICE RECORDINGmode, pressing the LCD button will change the display asshown below.Idle mode - After selecting Save mode by pressing the LCD button,and if the camera isn't operated during the specifiedtime(about 30 SEC.), the camera power will be idle (LCD monitor : OFF, Button lamp : Blinking) automatically.- To use the camera again, press any of the camera buttons except the power button. - If there is no operation during the specified time, the camera power will be turned offautomatically to save battery life. Refer to page 70 for more information about the autopower off function. Pressing theLCD buttonPressing theLCD buttonPressing the LCD buttonFull Inf. Mode Basic Inf. Mode Save Mode
44Using the LCD monitor to adjust the camera settingsYou can use the menu on the LCD monitor to set up recording functions. In any mode withthe exception of VOICE RECORDING mode, pressing the MENU button displays the menuon the LCD monitor.The menu will not be displayed on the LCD monitor in the following circumstances:- When another button is being operated.- While image data is being processed. - When there is no battery capacity.When the menu is showing on the LCD monitor, it is not possible to operate the shutterbutton i.e. capture an image. To capture an image, simply cancel the menu display bypressing the MENU button.INFORMATIONThe following functions are available, depending on the mode you have selected.The items indicated by are default settings.Menu tab Main menu Sub menu Camera working mode PageAutoManual2592X1944 2272X17042048X15361600X12001024X768640X480640X480320X240160X128S. FineFineNormal30FPS15FPSModeNight, Portrait,Children, Landscape,Close up, Text,Sunset, Dawn,Backlight, Firework,Beach&SnowSizeQualityScene p.36p.37p.38
45Using the LCD monitor to adjust the camera settingsMenu tab Main menu Sub menuCamera working modePageMultiSpotSingleContinuousSoftNormalVividNormalB&WSepiaNegativeOffRange 1Range 2Range 3Off2 Parts3 Parts4 PartsOffFrame 1Frame 2 Frame 3 OffOnShootingEffectSpecial EffectPhoto FrameHighLightCompositeSharpnessStabilizerp.39p.41p.53p.53p.42p.43p.43p.40* Menus are subject to change without prior notice.Metering
46How to use the menu3. Use the UP and DOWN buttons to select a sub menu.4. Select a sub menu, and then the value you set will be saved. Press the MENU button andthe menu will disappear.1. Turn on the camera and press the MENU button. A menu for each camera mode appears.However, there is no menu for Voice Recording mode ( ).2. Use the LEFT and RIGHT buttons to navigate through the menus.ModePress the UP orDOWN button.Press the UP orDOWN button.[STILL IMAGE mode]Press the LEFTor RIGHT button.Press the LEFT orRIGHT button.You can select the desired Still Image mode.[Auto] : Use this for shooting basic still images.[Manual] : Selecting the automatic mode will configurethe camera with optimal settings. You can still manually configure all functionsexcept the aperture value and shutter speed.[Scene] : Use the menu to easily configure optimalsettings for a variety of shooting situations- The selected [Scene] sub menu will bedisplayed on the LCD monitor. To change the sub menu or to get more information about the scene menus,refer to page 70.When [Night], [Close up], [Sunset], [Dawn] and [Firework] scene mode are selected, it ispossible that camera shake will occur. If you think this will happen, use a tripod.INFORMATION ModeAutoManualScene2592ModeAutoManualScene2592ModeAutoManualScene2592ModeAutoManualScene2592Size2592X19442272X17042048X15361600X12002592QualityS.FineFineNormal2592ModeAutoManualScene2592
47SizeYou can select the image size appropriate for your application.Icon2592 2272 2048 1600 1024 640 640 320 160Size2592X19442272X1704 2048X1536 1600X12001024X768 640X480 640X480 320X240 160X128The higher the resolution, the lower the number of available shots will be because highresolution images require more memory than lower resolution images.INFORMATIONSTILL IMAGE modeMode MOVIE CLIP mode[ STILL IMAGE mode ] [ MOVIE CLIP mode ]Size2592X19442272X17042048X15361600X12002592Size640X480320X240160X12864030FPS
48QualityYou can select the compression ratio appropriate for your application of the captured images.The higher the compression ratio, the lower the picture quality.Mode Icon 30FPS 15FPSSub menu S. Fine Fine Normal30FPS 15FPSFile Format jpeg jpeg jpeg avi avi STILL IMAGE mode MOVIE CLIP modeS. Fine is the highest quality and Normal is the lowest setting.Choose the setting appropriate for your needs.This file format complies with the DCF(Design rule for Camera File system).JPEG (Joint Photographic Experts Group) : JPEG is the image compression standarddeveloped by the Joint Photographic Experts Group. This type of compression is mostcommonly used for compressing photos and graphics because it can compress the filesefficiently without damaging the data.INFORMATION[ STILL IMAGE mode ] [ MOVIE CLIP mode ]QualityS.FineFineNormal2592Frame Rate30 FPS15 FPS640NOR30 FPS
49MeteringIf you cannot obtain suitable exposure conditions, you can change the metering method totake brighter pictures.[Multi] ( ) : Exposure will be calculated based onan average of the available light in theimage area. However, the calculationwill be biased towards the centre ofthe image area. This is suitable forgeneral use.[Spot] ( ) : Only the rectangular area in thecentre of the LCD monitor will bemetered for light. This is suitable when the subject in the centre isexposed correctly, regardless of the back lighting. The default metering mode is Multi pattern metering.If the subject is not the centre of the focus area, do not use the spot metering as this mayresult in an exposure error. In this circumstance, It is better to use exposurecompensation.INFORMATIONContinuous shotSelect the number of pictures in continuous shooting.- [Single] : Take one picture only - [Continuous] : Images will be taken continuouslyuntil the shutter button is released.The shooting capacity depends onthe memory. [MANUAL mode]1* High resolution and picture quality increases file savingtime, which increases stand-by time.* If the [Continuous] sub menu is selected, the flash will be off automatically.MeteringMultiSpot2592ShootingSingleContinous2592 NOR
50SharpnessBy using the camera’s digital processor, it is possible to add special effects to your images.[MANUAL mode ] [ MOVIE CLIP mode ][Normal] : No effect is added to the image.[B & W] : Converts the image to black and white.[Sepia] : Captured images will be stored in a sepia tone (a gradient of yellowish brown colours).[Negative] : Save the image in negative mode. EffectYou can adjust the sharpness of the picture you want totake. You cannot check the sharpness effect on the LCDmonitor before you take a picture, because this function isapplied only when the captured image is stored on thememory. [MANUAL mode]Sub menu Icon Description The edges of the image are softened. This effect is suitable for editing images on your PC.The edges of the image are sharp. This is suitable for printing.The edges of the image are emphasized. The edges will appearsharp, but noise may occur in the recorded image.VividNormalSoftSharpnessSoftNormalVividNOREffectNormalB & WSepiaNegativeNOREffectNormalB & WSepiaNegativeNOR30FPS
51Special EffectBy using the camera’s digital processor, it is possible to add special effects to your images.You can select this menu only in the MANUAL mode.You can select the preset focus frame, Composite shots and Photo frame function. If aspecial effect is selected, the rest special functions set before are cancelled automatically. You can make the subject stand out from its surroundings. The subject will be sharp and in focus while making the rest out of focus.1. Select the MANUAL mode, and press the menu button. 2. Press the LEFT/ RIGHT button and select the [Special Effect] menu tab.3. Select the [HighLight] menu by pressing the UP/ DOWNbutton and press the Right button.4. Select a desired sub menu by pressing the UP/ DOWNbutton and press the OK button.- [Off] : The preset focus frame will not be added. Special Effect : Preset focus frames[ Range 1] [ Range 2] [ Range 3]5. Press the menu button twice and the menu will disappear.If you select the [Range 1~3] menu, the preset focusframe area will appear. Special EffectHighlightCompositePhoto FrameOffOffOffNORMove : Set : OK152592 01:00 PM2005/01/01
52[ 1/2 ] [ 2/2 ] [ The result image ] Special Effect : Composite shotsYou can combine 2 ~ 4 different shots in a still image.1. Select the Still image mode, and press the menu button.2. Press the LEFT/ RIGHT button and select the [Special Effect] menu tab.3. Select the [Composite] menu by pressing the UP/ DOWNbutton and press the Right button.4. Select a desired sub menu by pressing the UP/ DOWNbutton and press the OK button.- [Off] : cancels the composite shots- [2 Parts] : 2 different shots are combined in a still image. - [3 Parts] : 3 different shots are combined in a still image.- [4 Parts] : 4 different shots are combined in a still image.5. Press the menu button twice and the menu will disappear.6. The number of frames you selected in step 4 is displayed on the LCD monitor. Press the shutter button to start the composite shots152592 01:00 PM2005/01/01152592 01:00 PM2005/01/01Pressing the shutterbuttonPressing the shutterbuttonSpecial EffectHighlightCompositePhoto FrameOffOffOffNORMove : Set : OKYou can use the flash button, self-timer button, macro button, +/- button and the ZoomW/T button during the composite shots. If you press the camera buttons (Menu button, Play mode button and M button) or rotatethe mode switch during the composite shots, the captured images aren’t saved and thefirst step of the composite shot will display on the LCD monitor. Do not press the camerabuttons or rotate the mode switch during the composite shots. To insert the voice memo, press the voice memo button before starting the compositeshot. The voice memo will start after taking the last composite shot. If you select [Cancel] in the [Composite] menu, the composite shot will be cancelled.INFORMATIONSelecting 2 composite shots
53Special Effect : Photo FrameYou can add 3 types of frame-like borders to a still image you want to capture.1. Select the Still image mode, and press the menu button.2. Press the LEFT/ RIGHT button and select the [Special Effect] menu tab.3. Select the [Photo Frame] menu by pressing the UP/DOWN button and press the Right button.4. Select a desired sub menu by pressing the UP/ DOWNbutton and press the OK button.- [Off] : The photo frame will not be added. 5. Press the menu button twice and the menu willdisappear. If you select the [Frame 1~3] menu, thepreset focus frame area will appear. * You can check the photo frame you added to pictures inQuick View or Play mode.[Frame1] [Frame2] [Frame3]Special EffectHighlightPart ShotPhoto FrameOFFOFFOFFNORMove : Set : OK152592 01:00 PM2005/01/01
54Movie Clip frame stabiliserThis function helps stabilize images captured during movie recording.You can select this menu only in the MOVIE CLIP mode.How to use this function 1. Select the MOVIE CLIP mode by sliding the modeswitch and press the menu button. Select the [Stabilizer]menu and press the right button. 2. Select a desired sub menu by pressing the Up/Downbutton and press the OK button. - [Off] : Movie clip frame stabilizer function becomesdisable. - [On] : Prevents camera shake during movierecording. The recording frame range will become narrower than when you selectthe [Off] menu. Pre-view frames may not display smoothly on the LCD monitor,but stored movie clips have no problems. StabilizerOffOnNOR
55Starting play modeTurn the camera on and select Play mode by pressing the play mode button ( ). The camera can now play back the images stored in the memory. If you have turned on the camera by pressing the POWER button, you can press the PLAYMODE button once to switch to Play mode and press it again to switch to Recording mode. You can turn the power on with the play mode button. The camera is turned on in play mode.Press the play mode button again to turn off the camera.You can set up the PLAY mode function by using the camera buttons and LCD monitor. If you press the PLAY button to switch to Play mode, the camera lens will retract into thecamera body for protection of the lens after about 10 seconds.Playing back a still image1. Select the PLAY mode by pressing the playmode button ( ).2. The last image stored on the memory isdisplayed on the LCD monitor.3. Select an image that you want to view bypressing the LEFT / RIGHT button.Press and hold the LEFT or RIGHT button toplay back the images quickly.Manner mode : Pressing the power button for more than 3 seconds changes the buzzerand start-up sound setting to OFF, even though you may have set these to ON. Even if the camera’s power is off, you can start the play mode by pressing the play modebutton.INFORMATION
56Starting play modePlaying back a movie clipSteps from 1-2 are the same as those to play back a stillimage.3. Select the recorded movie clip that you want to play backby using the LEFT/RIGHT button. If you select a movieclip, the movie clip indicator ( ) will be displayed on theLCD monitor.4. Press the play & pause button ( ) to play back amovie clip file.- To pause a movie clip file while playing it back, press theplay & pause button again.- Pressing the play & pause button again will cause themovie clip file will restart.- To rewind the movie clip while it is playing, press theLEFT button. To fast forward the movie clip, press theRIGHT button.- To stop playback of the movie clip, press the play & pause button, and then press theLEFT or RIGHT button.How to capture the movie clipSteps 1-2 are the same as those for playing back a stillimage.3. Select the recorded movie clip that you want to playback by using the LEFT/RIGHT button.4. Press the Play/Pause button to play the movie clip5. Press the Play/Pause button while playing the movieclip. Then press the Shutter button.6. The paused movie clip is saved in a new file name.* The captured movie clip file has same size as the originalmovie clip (640X480, 320X240, 160X128).Movie clip capture function: capture still images from the movie clip.[ Paused ][ Press the shutter button ]15PLAYREW FF
57Starting play modePlaying back a recorded voiceSteps from 1-2 are the same as those to play back a stillimage.3. Select the recorded voice that you want to play back byusing the LEFT/RIGHT button. If you select a recordedvoice file, the voice indicator ( ) will be displayed onthe LCD monitor.4. Press the play & pause button ( ) to play back arecorded voice file.- To pause a recorded voice file, while playing it back, press the play & pause button again.- To resume playback of the voice file, press the play & pause button.- To rewind the voice file while it is playing, press the LEFT button. To fast forward the voice file, press the RIGHT button.- To stop playback of the voice file, press the play & pause button, and then press theLEFT or RIGHT button.3On camera movie trimming : You can extract desired frames of movie clip during the movieclip play back. 1. Select a desired movie clip in the play mode. 2. Play back the movie clip by pressing the Play & Pausebutton.3. Press the Pause button at the point of the movie clip thatyou want to start extracting. 4. Press the T button. (The start point doesn't display onthe status bar, but the start point will be marked.)5. Press the Play button and the extracted range will be displayed on the status bar. 6. At the point of movie clip that you want to stop extracting, press the Pause button.7. Press the T button and a confirmation window will display.8. Select a desired sub menu by pressing the UP/ DOWN button and press the OK button.[Trim] : The extracted frames are saved as a new file name. [Cancel] : The movie trimming will cancel. If the running time is under 10 seconds, the movie clip can t be trimmed.If you want to extract the movie clip at the beginning of the frame, press the Zoom Tbutton before starting the movie clip. If the time line bar passes by the start point by pressing the REW( ) button, the firstframe of the movie clip will display. If you doesn t specify the ending point of the movie clip, the trimming confirmationwindow will display at the point of the last frame.INFORMATION 15PLAYREW FF
58LCD monitor indicatorThe LCD monitor displays information about the shooting conditions.No. Description Icon Page1 Battery p.15 2 Play mode3 File Type4 Voice memo p.585 Protect indicator p.656 DPOF indicator p.687 Stored image number 9Size : 2592X1944 Size Av : F2.8 Aperture valueTv : 1/60 Shutter speedISO : 100 ISO sensitivityFlash : Off Whether or not theflash is used. Date : 2005/01/01 Recording dateSize : 2592X1944Av : F2.8Tv : 1/60ISO : 100 Flash : OffDate : 2005/01/01If you press the LCD button, you can check the following recording information:
59Using the camera buttons to adjust the cameraIn Play mode, you can use the buttons on the camera to conveniently set up the Play modefunctions.Image enlargement1. Select an image that you want to enlarge and press the enlargement button.2. Different parts of the image can be viewed by pressingthe 5 function button.3. Pressing the thumbnail button will zoom back to theoriginal full sized image.- You can tell whether the image displayed is anenlarged view by checking the image enlargementindicator shown at the bottom left of the LCD monitor.(If the image is not an enlarged view, the indicator willnot be displayed.) You can also check the area ofenlargement.- Movie clips and WAV files can’t be enlarged.- If an image is enlarged, a loss of quality may occur.[ Normal display mode ] [ Thumbnail display mode ]Pressing the thumbnail button ( )Pressing the enlargementbutton ( )Highlighted imageYou can view multiple pictures, enlarge a selected picture, and crop and save a selected areaof an image.Thumbnail display1. While an image is displayed full screen, press thethumbnail button.2. The thumbnail display will highlight the image that hadbeen showing at the time the thumbnail mode wasselected.3. Press the 5 function button to move to a desired image.4. To view an image separately, press the enlargement button.Thumbnail ( ) / Enlargement ( ) button
60Thumbnail( ) / Enlargement( ) button The maximum enlargement rate in proportion to the image size.Trimming : You can extract part of the image that you wantand save it separately.1. Select an image that you want to enlarge and press theenlargement button.2. Different parts of the image can be viewed by pressingthe 5 function button.3. Press the MENU button and a message will bedisplayed as shown alongside.4. Select a desired sub menu by pressing the UP/ DOWN button and press the OK button.- [Trimming]: The trimmed image will save as a new file name, and display on the LCDmonitor. - [Cancel] : The trimming menu will disappear. * If there is little memory space to save the trimmed image, the image can’t be trimmed.* To delete the enlarged image during the trimming function, press the delete button.Image size 2592 2272 2048 1600 1024 640Maximum enlargement rateX10.1 X8.8 X8.0 X6.2 X4.0 X2.5Voice ( ) memo / Up buttonWhen the menu is displayed on the LCD monitor, pressing the UP button makes the menucursor move up. When the menu is not displayed on the LCD monitor, the UP button operates as the voicememo button. You can add your voice to a stored still image.Adding a Voice Memo to a Still Image1. Press the LEFT/ RIGHT button to select an image thatyou wish to add sound to.2. Press the voice memo button ( ) and the voice memoindicator will display. The camera is now ready to recorda voice memo.X2.1Trimming?Trim:OKCancelConfirm:OKStart : Shutter

Navigation menu