Hanwha Techwin DIGIMAXU-CA4 Digital Camera User Manual U CA4en 02 V01

Samsung Techwin Co Ltd Digital Camera U CA4en 02 V01

Contents

User Manual 3

99Setting up the application software23. The Software License Agreement windowwill be displayed. If you agree to this, click[Yes], the window will then move to the nextstep. If you disagree, click [No] and theinstallation program will be canceled.[Click!]24. A destination selection window will open.Click [Next >]. To copy to the files to anotherfolder, click [Browse...] and choose a folderyou want.[Click!]25. The [Select Components] window willappear. Click [Next >] button.[Click!]26. A window will open, asking you to choose afolder to which program icons will be added.Click [Next >] button. If you want to add the program icons to adifferent folder, choose another folder, andthen click [Next >] button.[Click!]
100Setting up the application software27. PhotoImpression Installation is complete.Click the [Finish] button to installVideoImperssion 2.0. * The system will not reboot even the [Yes, Iwant to restart the computer now] option isselected.[Click!]
101Setting up the application software28. The VideoImpression 2.0 installation window will bedisplayed as shown alongside.Click the [OK] button.29. [VideoImpression InstallShield Wizard] window will bedisplayed. Click the [Next >] button and a window will bedisplayed for the next step. 30. The Software License Agreement window will be displayed.If you agree to this, click [Yes], the window will then move tothe next step. If you disagree, click [No] and the installationprogram will be canceled.31. A destination selection window will open. Click [Next >]. To copy to the files to another folder, click [Browse...] andchoose a folder you want.32. A window will open, asking you to choose a folder to whichprogram icons will be added. Click [Next >] button. If youwant to add the program icons to a different folder, chooseanother folder, and then click [Next >] button.[Click!][Click!][Click!]33. VideoImperssion 2.0 Installation is completed. Click the[Finish] button and DirectX 9.0 installation will be started. [Click!]
102Setting up the application software34. The Software License Agreement window will be displayed.If you agree to this, select [I accept the agreement] and clickthe [Next >] button , the window will then move to the nextstep. If you disagree, select [I don’t accept the agreement]and click the [Next >] button. The installation program will becanceled.35. Installation is complete.Click the [Next >] button. 36. To apply changes, you must restart the computer. Select [Yes, I want to restart my computer now], and thenclick [Finish].37. The frame 39 may be displayed according to the systemrequirements. Click the [Finish] button to restart thecomputer. [Click!][Click!][Click!]
103Setting up the application software38. After restarting the computer, connect the PC to the camera with the USB cable.40. If you can see [Removable Disk] under [My computer], the camera driver installationwas successful. Now you can transfer image files from thecamera to PC via the USB cable.39. Turn the camera power on. [Found New Hardware Wizard] will open andthe computer will recognize the camera.If you have ever installed an image viewerprogram or your OS is Windows XP, animage viewer program will open. If the image viewer program opens, thecamera driver was setup successfully.
104Setting up the application softwareIf you have installed the camera driver, [Found New Hardware Wizard] may not open.On a Windows 98 or 98 SE system, the Found New Hardware Wizard dialog box opensand a window asking you to select a driver file may appear. In this case, specify "USBDriver" in the CD supplied. (for Windows 98 and 98 SE).When connecting the camera to your PC, it is recommended that you use an AC poweradapter.Before connecting the camera to the PC, You should first install the camera driver.After installing the camera driver, you have to restart your PC.If you connect the camera to the PC before installing the camera driver, the [Found NewHardware Wizard] will open.In this case, cancel the [Found New Hardware Wizard] and disconnect the camera.Install the camera driver and connect the camera to the PC again.Should the computer not find the camera driver after installation, please try one or moreof the following measures.1. Delete the camera driver (p.112), and re-install the driver.2. Refer to FAQ (p.119) to check for a possible solution to the problem.3. If your PC’s central processing unit is VIA chip (This is shown in the USB HostController), download the patch file from the Samsung Camera web page.(http://www.samsungcamera.com)INFORMATION
105DigiStudio Installation guideSystem Requirements for DirectX 9.01. If your PC does not have DirectX (version 9.0 or later) installed, follow the instructions providedduring the installation process to install DirectX.2. If you are asked to confirm the installation of DirectX, click [Next >].3. You will be asked to reboot after DirectX is installed.Once the installation of DigiStudio is complete, be sure to reboot your PC.System Requirements for QuickTime1. In order to view 3D avatars you created with DigiStudio in MOV format from the camera or PC,you must follow the instructions provided during the installation process and install theQuickTime Player (version 6.0 or later).2. If you are asked to confirm the installation of QuickTime, click [Next >].3. Please select the [Recommended] installation type.(p.106)System Requirements for DigiStudio DigiStudio requires the following minimum system configuration for smooth 3D performance. If your system does not meet the requirements, you will receive error messages and theinstallation will not continue.DigiStudioRecommended System Requirements Minimum System RequirementsCPU Pentium III 500Mhz Pentium II 400Mhz RAM 128MB 64MBGraphic CardSound CardHard DiskOperating SystemWeb BrowserGraphic card with 3D acceleration and atleast 8MB of video RAMGraphic card with 3D acceleration and atleast 16MB of video RAM16 Bit Stereo Sound Card150MB or more available space Windows 98SE/2000/ME/XP Internet Explorer 5.0 or later
106DigiStudio Installation guideCautions on the Graphic Card (VGA)The DigiStudio software will not install on a PO with a graphic card that does not support 3Dacceleration and that has less than 8 MB video RAM. If the graphic card error screen appearswhile using DigiStudio, please go through the following steps:Depending on your graphics card, 3D avatars may not be supported.Step 1 : Go to My Computer Control Panel Display Settings, check the display typeand color palette settings.Step 2 : Set the color palette to High Color (16 bit) or True Color (32 bit).For Voodoo3 or Savage4, set the color palette to High Color (16 bit).Step 3 : The following graphic cards do not support 3D acceleration and cannot be used withDigiStudio: (1)ATI 3D (Charger /Pro Turbo /Xpression)/All in wonder pro(2)ATI Rage ( /iic)/Rage 3D(LT Pro /Pro)/Xpert (98 /@play)(3)nVidia Riva 128(4)3dfx Voodoo 2(5)SiS (6215A0 /6125B0 /6215C /5598 /530 /620 /540)(6)Intel i740 graphics chip(7)Hercules Terminator Beast(8)Trident 3D /Blade /CyberBlade(9)Diamond Multimedia FireGL 1000 Pro(10)Number 9 SR9Step 4 : If the display type is set to Standard PCI GraphicAdapter (VGA), refer to the graphic card errorscreen and install the latest graphic card driver.Graphic Card Error Screen
107DigiStudio InstallationDigiStudio is a 3D avatar creation program. You can store3D avatar files on the camera and use one of the avatars asthe startup image.This software is available in the Windows version only.Be sure to install the camera driver before transferring theavatars to the camera. (See page 95.)For instructions on how to use DigiStudio, please refer toHelp.1. When the installation screen shown on the right appears,click [Install].Be sure to check the system requirements (p. 103) beforeinstalling the program.3. An installation start window will open. Click [Next >].2. The Language Selection window will open. Click [Next >].4. The QuickTime 6.3 Installation window will open. Click [Next >].*For more information on the QuickTime installation, please refer to page 95.5. The Welcome window will appear. Click [Next >].
108DigiStudio Installation6. The Software License Agreement window will appear, askingyou to agree to the licensing. Use the button on the bottomleft to select the language of your choice, and then click[Agree] to accept the license agreement. The installation willproceed to the next stage. If you do not agree to the licenseagreement, click [Disagree]. The installation will be canceled.If the language of your choice is not listed, please select[English].7. The Choose Destination Location window will open. Click [Next >]. To copy the files to a different folder, click[Browse..] Browse to a folder you want to copy the files to.8. The Choose Installation Type will open. Select [Recommended], and then click [Next >].9. The Select Program Folder window will open. Click [Next >].If you want to add the program icons to a different folder,choose another folder, and then click [Next >].10. The Enter Registration window will open. Enter your nameand organization in the respective fields, and then click[Next >]. You may skip the Registration Number field.11. The QuickTime program folder will appear. Click on the Close button to close the folder.12. The Introduction window will open. Click [Next].
109DigiStudio Installation13. The [Connection Speed] window will open. Click [Next]. To choose another transfer rate, clickand select the desired transfer rate.14. The Browser Plug-in window will open. Click [Next].15. The File Type Association window will open. Click [Finish]. If you want to associate other fileformats with QuickTime, put a checkmark (V) besides the file formats you want.16. The Finished window will open. Click [Close].* The QuickTime Player will launch, the readme file will open, and the DirectX 9.0 Installationwindow will open. Click on the Close button to exit the program.17. The DirectX 9.0 Installation window will open. Click [Next >].18. A window asking you to agree to licensing will open. Click [Yes] to agree to the license agreement. Theinstallation will proceed to the next stage. If you do notagree to the license agreement, click [No]. The installationwill be canceled.19. The Folder Selection window will open. Click [Next >]. To copy the files to a different folder, click [Browse..] Browseto a folder you want to copy the files to.20. Your installation is complete. Be sure to reboot your PC byclicking [Finish].
110Starting PC modeIf you connect the USB cable to a USB port on your PC and then turn on the power, thecamera will automatically switch to "computer connection mode".In this mode, you can download stored images to your PC through the USB cable.The LCD monitor is always turned off in PC mode.The camera status lamp will blink when the files are transferring via the USB connection.Connecting the camera to a PC1. Turn the PC power on.2. Turn the camera power on.3. In any mode other than Voice Recording mode, press the MENU button.4. Press the LEFT/ RIGHT button and select the [SETUP] menu tab.5. Select the [USB] menu by pressing the UP/ DOWN buttonand press the RIGHT button.6. Use the UP and DOWN buttons to select [COMPUTER],and then press the OK button.7. Press the menu button twice and the menu will disappear.8. Connect the PC and the camera via the USB cable.- Insert the small plug of the USB cable into the cameraUSB connection terminal.- Insert the large connector of the USB cable into the USB port of the PC.- The plugs must be firmly inserted.The camera driver must be installed before using PC mode.To save battery power, it is recommended that you use an AC adapter (Optional) whenconnecting the camera to a computerINFORMATIONDisconnecting the camera and PC : Refer to page 110 (Removing the removable disk).VIDEOQ.VIEWUSBCOMPUTERPRINTERBACK: SET:OKSETUPIf you selected [Printer] in Step 6, when youconnect the camera to your printer, the[PLEASE WAIT USB:PRINTER] message willbe displayed on the LCD monitor and theconnection will not be established. In this case,disconnect the USB cable, and then follow theprocedure from Step 3 and onward.
111Starting PC Mode3. Select an image and press the right mousebutton.4. A pop-up menu will open.Click [Cut] or [Copy] menu.- [Cut] : cuts a selected file.- [Copy] : copies files.Downloading stored imagesYou can download the still images stored on the camera to your PC's hard disk and printthem or use a photo editing software to edit them.1. Connect the camera to your PC with the USB cable.2. On your computer's desktop display, select[My computer] and double click [RemovableDisk DCIM 100SSCAM].The image files will then be displayed.5. Click a folder where you want to paste the file.
112Starting PC Mode6. Press the right mouse button and a pop-upmenu will open. Click [Paste].7. An image file is transferred from the camera toyour PC.- By using [Digimax Viewer], you can see the stored images in the memory directly on the PCmonitor and you can copy or move the image files.
113Removing the USB Driver for Windows 98SETo remove the USB driver, refer to the process shown below.1. Trace [Start Settings] and click [Control Panel].[Click !]4. Uninstallation is complete. Click the [Finish] button and the window willdisappear.[Click !]2. Double-click [Add/Remove programs].3. The [Add/Remove Programs Properties] windowwill open. Click [Digimax V50] and click the[Add/Remove] button.
114Removable DiskTo use this camera as a Removable Disk, install (p.101) the USB Driver.1. Before turning the camera power on, connect the camera to the PC with the USB cable.2. Click [Removable Disk] under [My computer] or [Windows Explorer].3. Image files stored in the Removable Disk (DCIM 100SSCAM) can be transferred to thePC.Important information whilst using the Removable DiskThe [Removable Disk] indicator will not show when the camera power is off or the USBcable is removed.We recommend that you should copy the images to the PC to view them. Openingimages directly from the removable disk may be subject to unexpected disconnection.When uploading images from the PC to the camera, ensure that the uploaded filenames are not the same as those already stored on the memory. When you upload a file that is not taken by this camera to Removable Disk, the [FILEERROR!] message will be displayed on the LCD monitor in the PLAY mode, andnothing is displayed in THUMBNAIL mode.The auto focus lamp will blink, when a file istransferred (copy or deletion) between the PCand the camera. Do not remove the USB cableuntil the lamp stops blinking. To remove the USBcable in Windows 2000/ME/XP, use the [Unplugor Eject Hardware] icon on the task bar.INFORMATION
115Removing the removable disk[Click!][Double-click!][Click!][Click!]Windows 98SE1. Check whether the camera and PC are transferring a file. If the auto focus lamp blinks, youhave to wait until the lamp illuminates.2. Unplug the USB cable.Windows 2000/ME/XP(The illustrations may be different from the real display in accordance with the Windows O/S.)1. Check whether the camera and PC are transferring a file. If the auto focus lamp blinks, youhave to wait until the lamp illuminates.2. Double-click the [Unplug or Eject Hardware]icon on the task bar.3. The [Unplug or Eject Hardware] window willopen. Select the [USB Mass Storage Device]and click the [Stop] button.4. The [Stop a Hardware device] window willopen. Select the [USB Mass Storage Device]and click the [OK] button.5. A [Safe to Remove Hardware] window willopen. Click the [OK] button.
116Removing the removable disk1. A USB Driver for MAC is not included with the software CD as MAC OS supports thecamera driver.2. Check the MAC OS. You can check the MAC OS version during MAC OS start-up. Thiscamera is compatible with MAC OS 9.0 ~ 10.2.3. Connect the camera to the Macintosh and turn the camera power on.4. A new icon will be displayed on the desktop after connecting the camera to the MAC.Using the USB Driver for MACSetting up the USB Driver for MAC1. Double click a new icon on the desktop and the folder in the memory will be displayed.2. Select an image file and copy or move it to MAC.For Mac OS 10.0 or later : First complete uploading from computer to camera and thenremove the removable disk with the Extract command.CAUTION6. A [Unplug or Eject Hardware] window willopen. Click the [Close] button and theremovable disk will be removed safely.7. Unplug the USB cable.[Click!]
117Digimax Viewer 2.1This software is only compatible with Windows.1. To open Digimax Viewer, click the [Start ProgramsSamsung Digimax Viewer 2.1 Digimax Viewer2.1 ] and Digimax Viewer 2.1 will then open. 3. You can easily use the Digimax viewer 2.1 program asit offers a FILE menu and TOOL bar.And, you can usethe pop up menu. Click an image and press the rightmouse button.Digimax Viewer functions are listed below.- Basic functions : Copy, Move, Delete, Rotate, Rename, changing file type, Resize,Property.- Advanced functions : Print, Slide show, Export, Sending e-mail, On-line print, Web album etc.2. If the [Auto Launch] option is selected, this program will be executed automatically withrecognizing the camera.Before deleting images from the camera, you should protect or download images toyour computer that you wish to keep.Refer to the [Help] menu in Digimax viewer 2.1 for further information.INFORMATION
118Using PhotoImpressionYou can use PhotoImpression to perform the following tasks.With PhotoImpression, you can edit or store still images that you downloaded from the camera.This software is only available in Windows version.To start the program, click [Start Programs ArcSoft PhotoImpression PhotoImpression].The following screen will appear.[ Command Button ][ Tool Bar ]Command Button[ Help Button ]Button DescriptionImports a picture from an album, a source folder, or the camera/scanner, orcaptures screen shots of what is being viewed on the current monitor.Selects Cut, Resize, Edit Image, Insert Text, Enhance Picture, InsertEffects, or Layer.Performs Insert Frame, Insert Borders, Insert Calendar, Insert GreetingCards, Insert Template, or Connect with Other Software.Saves the edited picture, and sends an e-mail or uses it as the backgroundimage.Outputs the edited picture according to your preferences.
119Using PhotoImpressionFor detailed instructions on how to use PhotoImpression, please refer to the program'sHelp.INFORMATIONTool BarButton Description Button DescriptionResize LayerFlip Layer HorizontallyUndoCopyDelete LayerRotate LayerRotate All LayersRedoPasteClose Picture
120Using VideoImpressionVideoImpression is a program which can edit or save downloaded movie clips from a camera.This software is only compatible with Windows.To operate this program, click the [ Start Programs ArcSoft VideoImpression 2 VideoImpression 2] and you can see screens below.Functions below can be performed with VideoImpression Menu Bar.Choose movie clip, still image or audio files that construct final movie clip orslide show.Selected files get united and make final movie clip or slide show.- AlbumChoose [Media] menu and Album window will beopen.Album is a useful tool to arrange media files (Stillimage, Movie clip, Audio file, etc.) visually and tomake user collections. Name each Album andyou can open each of them quickly withoutsearching for each folder.[ Menu Bar ][ Player ][ Storyboard ]
121Using VideoImpressionAdd : Add still images, movie clips or audio files to Album window.Arrange : Arrange files from Album window according to name, types, sizeand date.Video Capture : You can capture screens that you want to from a Video toolconnected a computer.Get images : You can get images that you want to from an Image tool connecteda computer.You can control luminosity and contrast of movie clips and still images inStoryboard. In addition, it is possible to indicate time of still images andcontrol beginning and ending of Audio files and movie clips in order toreplay parts you want. It is only applicable to movie clip project.- Back: When check previous images not showed on Storyboard which is belong to project, use it.- When check previous images not showed on Storyboard which is belong to project, use it.: To insert Audio file to Audio Track, double click Audio file in Album window.- Movie clip & Still image: When you double click movie clips or still images in Album window, it isinserted to Storyboard in order.- Effect: When component parts of project are changed, you can insert special effects.- Forward: When check next images not showed on Storyboard which is belong to project, use it.- File Manage- Storyboard[Back] [Audio Track][Movie clip & Still image][Effect] [Forward]
122Using VideoImpression* Move T-bar and choose the beginning andending point of text.: Record Audio on a movie clip: Replay recorded Audio.: Stop replaying or recording.: Set up Audio.Add effects or apply produced themes when you connect component partsof Storyboard.Add animation text to movie clip and still image used to make movie clip. It is only applicable to movie clip project.Record Audio on the program and add it to movie clip.
123Using VideoImpression1. Click [Produce] and then select [disk].2. Select [Samsung U-CA3/4] from [Video Type].After setting up Quick Time, select SamsungU-CA3/4.3. If you want to replay produced file on a camera,name the file SMMCxxxx.(xxxx means numberfrom 0001 to 9999)4. Click start button, and it is changed to a fileavailable to U - CA 3/4. (To replay the file on acamera, save it on DCIM/100SSCAM folder ofthe camera.)For more information, please refer to the Help file in a program.VideoImpression can be out of order because of inadequate use or program errorswhile you are making movie clip. User's carefulness is needed.INFORMATION All parts of storyboard get united and make movie clips or slide show. Youcan save movie clip with various ways and send it through e-mail to yourfriends.Way to make MPEG-4 movie clip for SAMSUNG U-CA3/4
124FAQPlease check the following if the USB connection malfunctions.[Case 1] The camera power is off.Turn the camera power on. We recommend using an AC power adapter in PCmode.[Case 2] USB Driver is not installed correctly.Install the USB Driver correctly. Refer to page 101.[Case 3] The USB cable is not connected or you are using a cable with an incorrectspecification.Use a USB cable with the correct specification.[Case 4] The camera is not recognized by your PC. Sometimes, the camera may appear under [Unknown Devices] in DeviceManager.Install the camera driver correctly.Turn off the camera, remove the USB cable, plug in the USB cable again, andthen turn on the camera.[Case 5] There is an unexpected error during file transferTurn the camera power off and on again. Transfer the file again.[Case 6] How do I know my computer supports a USB Interface?Check the USB port in your computer or keyboard.Check the OS version. A USB Interface is available in Windows 98, 98SE,2000, ME .XP.Check [Universal Serial Bus controllers] in Device Manager. Do the following tocheck [Universal Serial Bus controllers].Win 98/ME : Trace [Start Settings Control Panel System Device Manager Universal Serial Bus controllers].Win 2000 : Trace [Start Settings Control Panel System Hardware Device Manager Universal Serial Buscontrollers].
125FAQWin XP : Trace [Start Control Panel Performance andMaintenance System Hardware Device Manager Universal Serial Bus controllers].There must be USB Host Controller and USB root hub under [Universal SerialBus controllers].In addition, double-click on the USB Universal Host Controller and the USBRoot Hub to check if the Device Status states "This device is working properly".If the Device Status says the device is "not working properly", click the "Driver"tab and then click [Update Driver] or [Reinstall Driver].When all the conditions mentioned above are met, the computer can supportthe USB interface.[Case 7] When using the USB hub.There may be a problem in connecting the camera to the PC through the USBhub if the PC and the hub are not compatible. Wherever possible, connect thecamera to the PC directly.[Case 8] Are other USB cables connected to the PC?The camera may malfunction when it is connected to the PC at the same timeas another USB cable. In this case, disconnect the other USB cable, andconnect only one USB cable to the camera.[Case 9] When I open the Device Manager (by clicking Start (Settings) ControlPanel (Performance and Maintenance) System (Hardware) DeviceManager), there are Unknown Devices or Other Devices entries with ayellow question mark(?) beside them or devices with an exclamation mark(!)beside them.Right-click on the entry with the question(?) or exclamation (!) mark and select"Remove". Restart the PC and connect the camera the again. For Windows 98PC, remove the camera driver also, restart the PC, and then reinstall thecamera driver.Double-click on the entry with the question (?) or exclamation (!) mark, click the"Driver" tab, and click [Update Driver] or [Reinstall Driver]. If a message appearsasking you to specify the location of the appropriate device driver, specify "USBDriver" in the CD supplied.
6806-2006SAMSUNG TECHWIN CO., LTD.OPTICS & DIGITAL IMAGING DIVISION145-3, SANGDAEWON 1-DONG, JUNGWON-GU,SUNGNAM-CITY, KYUNGKI-DO, KOREA462-121TEL : (82) 31-740-8086,8088, 8090, 8092, 8099FAX : (82) 31-740-8398, 8111SAMSUNG OPTO-ELECTRONICS AMERICA, INC.HEADQUARTERS 40 SEAVIEW DRIVE, SECAUCUS, NJ07094, U.S.A.TEL : (1) 201-902-0347FAX : (1) 201-902-9342WESTERN REGIONAL OFFICE18600 BROADWICK ST., RANCHO DOMINGUEZ, CA 90220, U.S.A.TEL : (1) 310-900-5263/5264 FAX : (1) 310-537-1566SAMSUNG OPTO-ELECTRONICS UK LIMITED SAMSUNG HOUSE1000 HILLSWOOD DRIVEHILLSWOOD BUSINESS PARKCHERTSEY KT16 OPS U.K. TEL : +44 (0) 1932 455300FAX : +44 (0) 1932 455325SAMSUNG OPTO-ELECTRONICS GMBHAM KRONBERGER HANG 6D-65824 SCHWALBACH/TS., GERMANYTEL : (49) 6196 66 53 03FAX : (49) 6196 66 53 66SAMSUNG FRANCE S.A.S.BP 51 TOUR MAINE MONTPARNASSE 33, AV .DU MAINE 75755, PARIS CEDEX 15, FRANCEHOTLINE PHOTO NUMÉRIQUE : 00 800 22 26 37 27(Numéro Vert-Appel Gratuit)TEL : (33) 1-4279-2282/5 FAX : (33) 1-4320-4510SAMSUNG TECHWIN MOSCOW OFFICE RUSSIA, 125167, MOSCOW LENNINGRADSKY,PR-KT, 37-A, KORP14TEL : (7) 095-258-9299/96/98FAX : (7) 095-258-9297http://www.samsungcamera.ruTIANJIN SAMSUNG OPTO-ELECTRONICS CO.,LTD.7 PINGCHANG ROAD NANKAI DIST., TIANJINP.R CHINAPOST CODE:300190TEL : (86) 22-2761-8867FAX : (86) 22-2761-8864Internet address - http : //www.samsungcamera.com/The CE Mark is a Directive conformitymark of the European Community (EC)

Navigation menu