Hansol LCD E19BL 19 Inches CRT Monitor User Manual

Hansol LCD Inc. 19 Inches CRT Monitor

User Manual

Hansol Electronics Inc.Printed in KoreaPart No. 942189020001-01 www.hansolel.co.krUSER'S MANUAL19Printed on the recyclable paper
User’s Manual2User’s Manual 3FCC InformationThis equipment has been tested and found to comply with limits for a class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonableprotection against harmful interference in a residential installation.This equipment can generates, uses, and radiate radio frequency energy and, if not installedand used in accordance with the instructions, may cause harmful inteference to radioCommunications. However, there is no guarantee that interference will not occur in a particularinstallation.If this equipment does cause unacceptable interference to radio and television reception, whichcan be determined by turning the equipment off and on, the user is encouraged to try to correctthe interference by one or more of the following measures.Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected.Consult the dealer or an experienced Radio/TV technician for help.PRODUCT NAME : 19" COLOR MONITORMODEL NUMBER : E19BLFCC RULES : TESTED TO COMPLY WITH FCC PART 15, CLASS BOPERATING ENVIRONMENT : FOR HOME OR OFFICE USEFCC COMPLIANCE STATEMENT :This device complies with part 15 of FCC Rules. Operation is subject to the following twoconditions : (1) This device may not cause harmful interference, and (2) this device must acceptany interference received, including interference that may cause undesired operation.THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCEHANSOL MULTITECH, INC.7001, VILLAGE DRIVE, SUITE 255, BUENA PARK, CA. 90621, USATEL : (714)562-5151IntroductionPackage 4Safety Information 4Features 5Power management system 6InstallationConnection to your personal computer. 7Pin assignment table D-sub mini 15 pin connector 7ControlsOSD Controls 8OSD Menus 9TroubleshootingNo picture 12Image is scrolling or unstable 12Picture is fuzzy 12Picture bounces or a waving pattern is present in the picture12Edges of the display image are not square 12Display image is not centered, too small, or too large 12SpecificationsElectrical specifications 13Mechanical specifications 13Environmental specifications 13AppendixPreset Timings 14CautionChanges or modifications not expressly approved by the party responsible forcompliance could void the user’s authority to operate the equipment.Canadian NoticeThis Class B digital apparatus meets all requirements of the CanadianInterference Causing Equipment Regulations.Avis CanadienCet appareil numérique de la classe B respecte toutes les exigences duRèglement sur le matériel brouilleur du Canada.NoticeThe information contained in this document is subject to change without notice.English
IntroductionUser’s Manual 5IntroductionUser’s Manual4ENGLISHPackageCongratulations on your purchase of this top quality color monitor!The items illustrated below are contained in the carton.First, be sure that your carton includes all of them. If any items are missing or damaged, please contact your local dealer or supplier.- Color Monitor- AC Power input cable- User’s Manual Safety informationProvided with this monitor is a detachable power supply cord with IEC320 style terminations.It may be suitable for connection to any UL listed personal computer with similarconfiguration. Before making the connection ensure that the voltage rating of the computerconvenience outlet is the same as the monitor and that the ampere rating of the computerconvenience outlet is equal to or exceeds the monitor current rating.For 120Volt applications use only UL listed detachable power cord with NEMA configuration5-15P type(parallel blades) plug cap.For 240Volt applications use only UL listed detachable power cord with NEMA configuration6-15P type(tandem blades) plug cap.Use only a power source and connection appropriate for the monitor as indicated on themarking label.Slots and openings in the cabinet are provided for ventilation;these openings must not be blocked or covered. Never push objects of any kind into cabinetslots or other openings.Never insert anything metallic into the monitor openings.Doing so may create a danger of electric shock.To avoid electric shock, never touch the inside of the monitor.Only a qualified technician should open the monitor s case.Unplug the monitor from the wall outlet before cleaning. Do not use liquid cleaners or aerosolcleaners. Use a damp, lint-free cloth for cleaning.Install the monitor near an outlet that you can reach easily. Disconnect the product bygrasping the plug firmly and pulling in from the outlet. Never disconnect it by pulling the cord.FeaturesSuperior imageOn Screen menu fingertip control system to visually select and adjust screen using buttonson front panel and on screen menus. The exclusive double dynamic focus system with a hyperbolic focus compensation circuitcontrols the electron beams resulting in a fine image display over the entire area of thescreen.Super contrast screen for superior contrast and richer color.Advanced INVAR Shadow mask for superior focus, brightness and color.19", 0.26dot pitch high resolution, non-interlaced technology provides sharp, flicker-freeimages.On screen menu color control system easily allows the white of the image to be adjusted aswell as R.G. B signals, resulting in true-to-life colors.Ergonomic DesignFlat, square screen to reduce image distortion and glare, thus relieving eye strain.Tilt base allowing 90 rotation in the horizontal and 17 in the vertical for greater user comfort.Low-leak radiation prevention meeting MPR II and the very stringent TCO (option) magneticfield emissions standards for increased user safety.Environmentally FriendlyPower management circuit conforming to VESA DPMS standards controls energyconsumption when monitor is not in use, you save energy.All plastic parts are recyclable. All materials are strictly selected to ensure ease ofmaintenance, inspection and disposal.TimingAutomatic tracking of horizontal frequencies of 30 ~ 85 kHz,and vertical frequencies of 47 to 160 Hz.Ten timings are factory preset for image size and positionTen additional timings are user definable.Synchronizing input signals (separate, composite) can be automatically selected.
User’s Manual 7ENGLISHInstallationConnection to your computerCAUTIONEnsure that both the PC and the display monitor are switched off.To attach the monitor to your system, asshown in the following illustrations.1. Insert the AC power cord into monitorand then into an AC power outlet.2. Connect the signal cable to the 15pingraphics connector of the system andtighten the fastening screws.3. To turn on the monitor, push the powerswitch.Note : To attach the monitor to the Macintosh system, please contact an authorizeddealer.(Need to use a special adaptor)Pin assignment table D-Sub Mini 15pin connectorThe 15-pin D-Sub connector(male) of the signal cable (IBM Systems) :(15 Pin D-Sub)1511 15610Pin No. Assignment1 Red Video2 Green Video3 Blue Video4 Frame Ground5 Ground6 Red Video Ground7 Green Video Ground8 Blue Video Ground9 N.C10 Sync. Ground11 Ground12 SDA13 H-Sync.14 V-Sync.15 SCLIntroductionUser’s Manual6System FlexibilityEquipped with DDC1, DDC2B and DDC2Bi for Plug & Play compatibility.Monitor is compatible with VGA, SVGA, VESA and high resolution video modes up to 1280(H) 1024(V) @ 75HzMonitor may be used with IBM or compatible PC, MAC.Automatic universal power supply is built in permitting AC power input of 100 - 240V AC, 50 or 60Hz.Self-test menu allows the display unit to be checked on screen without connecting to acomputer.Compact case minimizes desktop space giving you a large screen image without loss ofworkspace.Power cable included easily plugs into a standard outlet.Power management systemThis monitor complies with VESA, Nutek, and Energy Star power saving requirements. Thepower saving system works only when used with VESA DPMS compliant PC’s and/or graphiccontrollers.The monitor goes into various power saving stages depending on the incomingvideo signal as shown in the following tableNoteThe monitor automatically goes through the DPMS steps when it is idle.To release the monitor from the DPMS condition, press any key on the keyboard or mouse.State Horizontal Sync Vertical SyncOn On OnStand by Off OnSuspend On OffOff Off OffState LED Power Recovery TimeOn Green Normal (95 Watts) N/AStand by Green 65 Watts 2 SecSuspend Green/Blink(0.5 Sec) 15 Watts 5 SecOff Green/Blink(1Sec) 5 Watts 15 Sec
User’s Manual 9ENGLISHUser’s Manual8ControlsControlsOSD controls"ON SCREEN DISPLAY MENU" controls include the following extended controls such as Size,Position, Geometry, Color Adjust, Brightness and Contrast Utilities. Adjustments are savedinstantly. The currently addressed control can be reset to factory settings by pressing the Resetbutton. Function of OSD buttons on the front of the monitorDO : Displays OSD main Menu.1) When Main menu is displayed. : Selects function with RED ICON.2) When Submenu is displayed. : Selects function with RED ICON.1) When no OSD on the Screen, In the main menu, move the function to select one of the controls.In submenu, adjust the bar to increase or decreases the adjustment.2) When no OSD on the Screen,/ : Direct Brightness access./ : Direct Contrast access.Additional front controlsPower Switch : Turns the monitor power on or off. When the power is on, the LED is on.LED Power indicator Light : Located up side of the power switch and indicates the monitor'spower mode. Each mode reduces the amount of power used by the monitor.Accessing on screen menuPress DO Button.Turning off on screen menuWhen in the main menu, press the EXIT button.When in submenus, press the EXIT button twice.OSD MenuOSD MENU MENU1. NO OSD Proceeds to NO.2 Proceeds to Proceeds to No meaningNO.3 NO.42. MAIN MENU The function with RED Moves to function you want. Exit to No.1ICON is- Performed : Recall, Degauss- Selected and blinked: Color Adjust, Zoom- Proceeded : Others3. BRIGHTNESS Moves to No.2 Decreases the Increases the Exit to No.1brightness brightness4. CONTRAST Moves to No.2 Decreases the Increases the Exit to No.1contrast contrast5.H/V-POSITION Toggles horizontal or Moves the Moves the Exit to No.2vertical position image down or image up orleft in the right in theselected selectedfunction. function.6. H/V-SIZE Toggles horizontal or Shinks the Expands the Exit to No.2vertical size image in the image in theselected selectedfunction. function.7.GEOMETRY Odd press Controls the amount of the Exit to No.2: Selects and blinks the Selected funcion. (Refer to Geo-function with RED ICON metry controls menu in detail)Even press Moves to function you want. Exit to No.2: Stops blinking andready to move functionyou want.POSITIONPRESS MENU KEYBRIGHTNESS5031.5KHz 60Hz PPCONTRAST5031.5KHz 60Hz PP H. POSITION50H. SIZE5050%PINCUSHIONPARALLELOGRAMTRAPEZOIDPINBALANCEROTATIONGEOMETRY50
User’s Manual 11ENGLISHUser’s Manual10ControlsControlsOSD MENU MENU8. MOIRE Odd press Contros the amount of the selected Exit to No.2: Selects and blinks the function. Please control these keyfunction with RED ICON in order the image not to shiver.Even press Moves to function you want.: Stops blinking and ready to move functionyou want.9. LANGUAGE Selects the languages Moves to language you want. Exit to No.2with RED ICON and Exit to No.210. OSD POSITION Toggles OSD position Moves the OSD Moves the OSD Exit to No.2horizontally or vertically. menu left or menu right ordown in the up in the selected selectedfunction. function.11. COLOR MODE Odd press Moves to color mode you want Exit to No.1: Blinks the RED ICON and the selected “color mode”- color menu ICON. will blink.Even press Moves to function you want. Exit to No.1: Stops blinking andready to move functionyou want.When the color mode _ _ _ICON is blinking in usermode, press, then go tocolor adjust mode No.12.12. COLOR ADJUST Odd press Controls the amount of function Exit to No.11MODE : Selects and blinks the you want.function you want.Even press Moves to the function you want. Exit to No.11: Stops blinking and ready to move functionyou want.50MOIRE CONTROLH. MOIRE ADJUSTV. MOIRE ADJUSTLANGUAGEPRESS MENU KEYOSD H.POSITION50COLOR - TEMPUSER 6500K 9300K50RB GB BB RG GG BGUSEROSD MENU MENU13. ZOOM Odd press Shinks the Expands the Exit to No.1: Selects zoom and image imageblinks the zoom ICON. horizontally horizontallyand vertically. and vertically.Even press Moves to the function you want. Exit to No.1: Stops blinking andready to move another function.Recall ( ) : Recall control to the factory setting resets all the controls within the all menu. If you want to return to the factory mode setting, press menu key onRecall ICON.Degauss ( ) : Eliminates the build-up of stray magnetic fields which alter the correct scan of theelectron beams and affect the purity of the screen colors, focus, andconvergence. When pressed, you screen image will jump and waver a bit as thescreen is demagnetized.Caution : Please allow aminimum of 20 minutes to elapse between uses of the Degaussbutton. Do no hold the button down continuously to avoid decreasing the life theDeguass circuitry.Geometry Controls MenuThe Geometry controls allow you to adjust the curvature or angle of the sides of you display.Pincushion : Increases or decreases the curvature of the sides either inward or outward.Parallelogram : Increases or decreases the tilt of the sides either to the left or right.Trapezoid : Increases or decreases the bottom of the screen to be the same as the top.Pin Balance : Increases or decreases the curvature of the sides either to the left or right.Rotation : Increases or decreases the tilt of the screen image relative to a horizontal line.ZOOM5050RB GB BB RG GG BGUSERRB - Red background rasterGB - Green background rasterBB - Blue background rasterRG - Red level gainGG - Green level gainBG - Blue level gain
User’s Manual 13ENGLISHUser’s Manual12 13SpecificationsElectrical SpecificationsMechanical SpecificationsEnvironmental SpecificationsITEM E19BLCRT Type 19 , 90 deflection FSTCRT Dot pitch 0.26mmCRT Surface Non-glareH/V Separate, TTL, positive/negativeH/V Composite, TTL, positive/negativeRGB Analog (0.7Vp-p), positive75 Terminated30KHz~85KHz (Automatically)47Hz~160Hz (Automatically)Maximum Resolution 1280Dots 1024Lines (75Hz)Pixel Clock(Max.) 135 MHzDisplay Size (Standard) Horizontal 350mm, Vertical 262mmPower Consumption(Max.) 110 WattsPower Supply AC 100~240Volt, 50/60Hz 3HzInput Connector D-Sub, 15Pin ConnectorsDisplay Colors UnlimitedITEM E19BL18.5 (W) 18.2 (D) 18.3 (H) 470mm(W) 462.5mm(D) 466mm(H)21.6 (W) 22.6 (D) 22.4 (H)540mm(W) 537mm(D) 543mm(H)43Ibs (19.5Kg)49.6Ibs (22.5Kg)ITEM E19BL32 F to 104 F (0 C to 40 C)-4 F to 140 F (-20 C to 60 C)10% to 85% R.H. Non-condensingInputSignalDimensionSyncVideoCartonUnitHorizontalNetVerticalGrossOperatingStorageHumidityScanningfrequencyWeightTemperatureTroubleshooting No pictureCheck that the AC cord is correctly connected.Check that the AC socket is live by plugging in another piece of equipment.Power switch and computer power switch should be in position. Ensure that the signal cable is properly connected to the video card or PC.Ensure that the video card is securely seated in the PC.Check the connector for bent or pushed-in pins.Press a key on the keyboard or move the mouse, in case the screen power-saver mode hasblanked the screen.Image is scrolling or unstableSignal cable should be securely attached to the computer.Check the pin assignments and signal timings of the monitor and your video card withrespect to recommended timings and pin assignments. Ensure that the video card is securely seated in the PC.Picture is fuzzyAdjust the Contrast and Brightness Controls.Push the Degauss Button once.Caution : A minimum interval of 20 minutes should exist before the Degauss Button is used asecond time. Do not hold the button down continuously. Picture bounces or a waving pattern is present in the pictureMove electrical devices that may be causing electrical interference away from the monitor.See the inside front cover of this manual for FCC information. Unshielded audio speakers placed next to the monitor can cause picture distortion. Movethe speakers away.Edges of the display image are not squareAdjust the distortion using the Side Pincushion or Trapezoid Pincushion Balance, Paralleladjustment controls under the on screen menu.Display image is not centered, too small, or too largeAdjust the horizontal and vertical image sizes using the Horizontal and Vertical Sizeadjustment controls under the on screen menu.
User’s Manual14AppendixPreset TimingsThis Monitor E19BL has preset modes for the 10most popular industry standards for Plug andPlay capability.VideoSyncVerticalVideoSyncHorizontal1024/75Hz 1024/85Hz 1280/75Hz 640/67Hz 832/75Hz1024 768 1024 768 1280 1024 640 480 832 624H-Freq(kHz) 60.023 68.677 79.976 35 49.726Asec 16.660 14.561 12.504 28.571 20.11Bsec 1.219 1.016 1.067 2.116 1.117Csec 2.235 2.201 1.837 3.175 3.91Dsec 13.003 10.836 9.481 21.164 14.524Esec 0.203 0.508 0.119 2.116 0.559V-Freq(Hz) 75.029 84.997 75.025 66.667 74.551Omsec 13.328 11.765 13.329 15 13.414Pmsec 0.050 0.044 0.038 0.086 0.06Qmsec 0.466 0.524 0.475 1.114 0.784Rmsec 12.795 11.183 12.804 13.714 12.549Smsec 0.017 0.015 0.013 0.086 0.02Pixel rate(MHz) 78.750 94.5 135 30.24 57.284H-Polarity Positive Positive Positive Negative NegativeV-Polarity Positive Positive Positive Negative NegativeVESA MACINTOSHResolutionTimingVGA/70Hz VGA/60Hz 640/85Hz 800/75Hz 800/85Hz720 400 640 480 640 480 800 600 800 600H-Freq(kHz) 31.469 31.469 43.269 46.875 53.674Asec 31.777 31.777 23.111 21.333 18.631Bsec 3.813 3.813 1.556 1.616 1.138Csec 1.907 1.907 2.222 3.232 2.702Dsec 25.422 25.422 17.778 16.162 14.222Esec 0.636 0.636 1.556 0.323 0.569V-Freq(Hz) 70.09 59.94 85.008 75 85.061Omsec 14.268 16.684 11.764 13.333 11.756Pmsec 0.064 0.064 0.069 0.064 0.056Qmsec 1.08 1.048 0.578 0.448 0.503Rmsec 12.711 15.253 11.093 12.8 11.179Smsec 0.413 0.318 0.023 0.021 0.019Pixel rate(MHz) 28.322 25.175 36 49.5 56.25H-Polarity Negative Negative Negative Positive PositiveV-Polarity Positive Negative Negative Positive PositiveResolutionTimingIBM VESA

Navigation menu