Hans Turck and KG TNSLRQ350 RFID Reader User Manual annex

Hans Turck GmbH & Co. KG RFID Reader annex

Contents

user manual annex

read/write headTNSLR-Q350-H1147Edition • 2015-08-27T10:30:40+02:001 / 3 Hans Turck GmbH & Co.KG ñ D-45472 Mülheim an der Ruhr ñ Witzlebenstraße 7 ñ Tel. 0208 4952-0 ñ Fax 0208 4952-264 ñ more@turck.com ñ www.turck.comType code TNSLR-Q350-H1147Ident no. 7030454Mounting conditions non-flushAmbient temperature -25…+70 °COperating voltage 19.2…28.8VDCDC rated operational current ð 150 mAData transfer inductive couplingOperating frequency 13.56 MHzRadio communication and protocol standards ISO 15693Read/write distance max. 794 mmOutput function 4-wire, read/writeConstruction rectangular, Q350Dimensions 370x 350x 20mmHousing material plastic, PBT, blackMaterial active area plastic, BlackConnection male, M12 x 1Vibration resistance 55 Hz (1 mm)Shock resistance 30 g (11 ms)IP Rating IP67MTTF 121 years acc. to SN 29500 (Ed. 99) 40 °CPower-on indication LED greenDiagnostic display Functional description of yellow range-restrict-ed LED: If the read/write head is suppliedwith voltage, it briefly checks to see whetherits resonance frequency is affected by sur-rounding metal. If this is the case, the reso-nant circuit off-tunes its frequency to reachagain the (optimum) resonance frequency.However, this is only possible within a cer-tain range. If too much metal is in the envi-ronment, the read/write head cannot re-tuneor the surrounding metal takes too much en-ergy from the field and due to the reducedrange the communication between the read/write head and the data carrier is cut off (theorange range-restricted-LED lights up). If theLED is off, this does not mean conversely,that no reduction in range occurs. The lit LEDis rather an indication of too much metal inthe environment and a greatly reduced range(about 50% less).■Rectangular, 370x350 mm, height 20mm■Active face on top■Plastic, PBT-GF30-VO■Powered and operated only via BL identinterface module■Male M12 x 1, only for use with BL identextension cableConnectors …/S2503Connectors …/S2500Connectors …/S2501Functional principleThe HF read/write heads operating at a fre-quency of 13.56 MHz form a transmissionzone the size of which (0…500 mm) varies,depending on the combination of read/writehead and data carrier.The read/write distances mentioned here on-ly represent standard values measured underlaboratory conditions.The read/write distances of the data carriersfor mounting in metal TW-R**-M(MF) were de-termined in metal.Attainable distances may vary by up to 30 %due to component tolerances, mounting con-ditions, ambient conditions and material quali-ties (especially when mounted in metal)Testing of the application under real operat-ing conditions is therefore essential, especial-ly with read/write on-the-fly!
read/write headTNSLR-Q350-H1147Edition • 2015-08-27T10:30:40+02:002 / 3 Hans Turck GmbH & Co.KG ñ D-45472 Mülheim an der Ruhr ñ Witzlebenstraße 7 ñ Tel. 0208 4952-0 ñ Fax 0208 4952-264 ñ more@turck.com ñ www.turck.comPackaged quantity 1Special features Very long ranges
read/write headTNSLR-Q350-H1147Edition • 2015-08-27T10:30:40+02:003 / 3 Hans Turck GmbH & Co.KG ñ D-45472 Mülheim an der Ruhr ñ Witzlebenstraße 7 ñ Tel. 0208 4952-0 ñ Fax 0208 4952-264 ñ more@turck.com ñ www.turck.comData carrierDimensions Type designation Read-write distance Transfer zone Minimum dis-tance betweentwo read-write headsIdent - no. Recommend-ed (mm)max. [mm] lengthmax. [mm]width offsetmax. [mm][mm]TW-R50-B1286900504280 560 600 300 1110TW-R50-K26900507210 400 480 240 1110TW-L86-54-C-B1286900479432 794 792 396 1110
TypeIdent-No.7030454Qty1TNSLR-Q350-H11471615HWarning:Hazardous voltage can cause electrical shock and burns.Disconnect power before proceeding with any work on this equipment.Made in GermanyHans Turck GmbH & Co. KG · Witzlebenstraße 7 · 45472 Mülheim/Ruhr · GermanyPhone +49 208 49 52-0 · Fax +49 208 49 52-264 · more@turck.com · www.turck.com24 VDCIP67

Navigation menu