Hangzhou Virtual And Reality Technology BACK1 KATVR-Back Sensor User Manual 2 1

Hangzhou Virtual And Reality Technology Co., LTD. KATVR-Back Sensor Users Manual 2 1

Users Manual_2-1

KAT WALK Premium PackageUser manual
2 ContentsContentsAbout the User Manual 5Declaration 6Safety 6Health Warnings 7Maintenance 8 Attention KAT WALK 9Product Introduction 9Product Appearance 9Parameters 9KAT STATION 10Product Introduction 10Product Appearance 10Parameters 10KAT SHOES 11Product Introduction 11Product Appearance 11Product Introduction 12Product Appearance 12VR Head-Mounted Display 13Product Introduction 13Product Appearance 14Product Introduction List of Items 15Installation Instructions 16Preparation of Tools 16KAT WALK PREMIUM Installation 17Use of Base Plate Holder 17Starting Installation KAT SHOE COVER 12
3 ContentsContentsConnect the KAT SENSORS 29Pairing Sensor 30KATVR-Foot Sensor 31Wireless Receiver 32KATVR-Central Sensor 33KATVR-Back Sensor 34Starting InstallationPower Switch 35Sensor Status Indicators 36Starting the Head-Mounted Display 36Correct Wearing 37Installation and Dismantling of KAT Foot Sensors on KAT SHOE COVER 38Fast Replacement of KATVR-Foot Sensor 38Dismantling of the Main Body of KATVR-Foot Sensor 38Installation of the Main Body of KATVR-Foot Sensor 38Installation and Dismantling of Foot Sensors on KAT SHOES 39Installation of KATVR-Foot Sensor 39Installation of the Main Body of KATVR-Foot Sensor 39IInstalling the KATVR-Foot Sensor 40Instructions for Use of KAT WALK Self - Adaptation Computer 41Login the KAT Game Flat 42Game settings 44Calibration Settings 46Setting the Static Value 50Help Center 53Quitting the Game 51Turning Off the Software 52Starting to Use Connection of Grounding Cable 27Connection of Logo Light Source Cable 28Connection of VR Head-Mounted Display and Base Stations 28Installation of KAT WALK Shell 25Installation of Support Pillar Shell 25
4 ContentsContents 61Dismantling and Replacement of KAT WALK PREMIUM Components 55Dismantling Shell 55Dismantling Mechanical and Electrical Structure 55 56Dismantling and Replacement of KAT STATION Control Center ComponentsKAT SHOES Replacement Instructions 56 56Procedures of Replacing SlidersProcedures of Replacing Wheels 58Instructions for Replacing KAT SHOE COVER 59Steps of Replacing Slide Blocks 59Dismantling and Replacement Frequently Asked Questions 65Frequently Asked QuestionsWarningsFCC Warnings 66IC WarningsContents
5 About this user manualAbout this user manualThe user manual contains all the information needed for installing and using KAT WALK PREMIUM ODT platform.The following signs are used for indicating useful and important information in the manual：This sign means“Attention”, which usually provides additional information that is helpful in completing a certain job as well as information applicable to certain scenarios.This sign means“Hint”, which helps you understand options that may be help to you.This sign indicates important information, which means that you must complete one or more than one installation or setup of software and hardware according to the stated methods in the manual.This sign means“Safety Warnings”, which reminds you to take care of your own safety. You need to pay special attention to this information in case of any potential safety issues.
6 DeclarationDeclarationSafety is the trademark of Hangzhou Virtual Reality Technology Co., Ltd. Trademarks, product identification and commodity names of other companies in this manual are respectively owned by their owners. No organization or individual is allowed to extract or copy parts or all of the contents in the manual, or spread them in any form or use them for any commercial or profit-making purposes without the written consent of our company.The contents of the manual are subject to changes due to product version upgrading or other causes. We reserve the right to change the contents of the manual without any notice or hints. The manual is only used as usage guidance and we try our best to provide accurate information in it, and yet we do not guarantee zero error. The statements, information and suggestions in the manual do not constitute any explicit or implicit guarantee.As the product contains the HTC VIVE BE commercial head-mounted display, parts of the contents are extracted from HTC’s official manual. The instructions on how to use HTC products shall be subject to the description in HTC’s official manual.Risk of place selectionPlease do not place the product in the following ：places: Outdoor places with direct sunlightUnstable places, or places with slopes or vibrationsExhibition stand with inadequate load bearing or places made of glassDisaster prevention places such as safety exits or places with firefighting equipmentIf it requires changing the place for usage after installation, please do strictly follow the steps of dismantling first, use packs of the same materials as the original pack and select a high-quality logistics or moving company. Otherwise, the device will be prone to damage. Please be alerted of it Risk of electric shock or firePlease do not expose the product or its accessories to rain or water or put any liquid container near the product. If water is accidentally splashed or infiltrated into the inside of the device, please plug out the power immediately and contact KAT customer service center for inspection before reusing the product.Please do not place the product or its accessories near fire or heat, and avoid exposing it directly under the sunlight. Please do not insert any items in the product vent or other openings.Please plug out after switching off relevant products and do not randomly cut off their power supply.Please plug out the product before a thunder storm.Please pull out the power cable from the plug section and do not directly pull the cable.Please make sure the socket voltage is the same as the value printed on the back of the product or within the guide manual. If they differ, please do not connect the product to the power supply socket.Please browse our website for the latest information http://www.katvr.com
Health WarningsThe following health warnings will be updated anytime for accuracy and completeness.Please carefully read the product instructions before using the product and do the setup according to the instructions. Incorrect setup may increase the risk of discomfort.It is advised that pregnant women, the elderly, those with visual disorder or a record of mental illness or those once affected by other serious health conditions such as heart diseases, consult with the doctor before using the product.As different people have different constitutions, we advise not to use the product for a long time in case of anydiscomfort, such as giddiness, dizziness, headache, etc. If you have any discomfort, please stop using it immediately and stop any potentially dangerous activities (such as driving) for the time being until the symptoms completely disappear. If the symptoms persist, please do not continue to use it without consultation with the doctor.If the user has a medical history of epilepsy or photosensitive epilepsy, then he/she needs to consult with the doctor before watching VR with flashing light source or fast image sequence.Children must use the product with parents aside to make sure that they will not suffer from any of the above mentioned discomfort. As the visual system of children under 13 years old has not completely matured, it is not advised for them to use the product.Those who weigh over 100kg are not advised to use the product due to the limited load bearing of the base plate and shoes. The best body height for the product is 150-180cm.Do not use the product for too long (control it within a few minutes) when using it for the first time. The period of usage can only be lengthened step by step after the gradual adaption to VR.Comfortable VR experience requires undamaged sense of movement and balance. The user is strictly forbidden to use the product when he/she is in fatigue, needs sleep, is affected by alcohol or medicine, or suffers from hangover, mental stress or anxiety, headache or earache. Otherwise, the symptoms of discomfort will only be worsened. Please stop using the product immediately if the following symptoms occur Epilepsy seizure and loss of consciousness; eyestrain, eye or muscle cramp, involuntary movement, visual change, blurred eyesight or other visual disorder; dizziness and loss of direction; damaged sense of balance or hand-eye coordination capability; excessive sweating, nausea, dizziness, head or eye discomfort or pain, drowsiness, fatigue or any symptoms similar to motion sickness. Just like the symptoms people feel after getting off boat, the symptoms caused by VR may last and become more obvious hours after the usage. Please do not drive, operate machines or carry out any other activities requiring vision or certain body conditions and with potential risks; or do any other activities that require undamaged sense of balance and hand-eye coordination capability (such as sports activities), as they may result in serious consequences. do not drive, operate the machine or engage in any other activities that are required for visual or physical and potentially dangerous activities, or engage in other activities that require undisturbed balance and hand-eye coordination (physical activity, etc.) until fully restored as it may cause serious consequences7 Attention
8 Product maintenanceMaintenance of Base PlateOnce the materials of KAT Shoes and those of the base plate match, there will be a fixed friction coefficient, which is the balance point of the best experience. Abrasion to the base plate will result in declined product experience and affect the plate life. Please note the following three points prior to usage:Do not make contact the base plate with non KAT Shoes or any other objects;Make sure that the base plate is wiped clean ofany foreign matter before using the device every day.If necessary, you may drop the complimentary maintenance oil specially for the device (only one drop is needed as the materials are special);Make sure that there is no foreign matter on the sole sliders and wheels of KAT Shoes every time before using the device.Daily Maintenance of Head-Mounted DisplayThe head-mounted display and handle sensors are highly sensitive, and thus, user experience will be severely affected if they are damaged. Please note the following when using the display:Please properly store the head-mounted device and keep the lens away from direct sunlight when it is not being used. Otherwise, it might result in the damage of the display screen of the head-mounted device.Please use the cleaning cloth provided in the packing box to clean the lens. Dip the cloth in alcohol or lens detergent, and do the cleaning in circular motions from the center of the lens to the outer edge.When cleaning the face pad, please take it off from the head-mounted device first. Dip a piece of soft cloth in cold water and gently clean the areas that need cleaning. Please do not dip or soak the pad in water; dry it under room temperature instead of rubbing, wringing or bleaching it; do not tumble dry, iron or expose it under direct sunlight. Instructions for regular examination of girdleWhen a customer weighs beyond the limit (>100kg) or is with an overly sized waist, please duly check if the girdle set has deformed. It is advised to conduct a regular examination on the girdle set every other week, mainly checking if the bolt at the connection on the back of the girdle set has loosened, if the washer at the bolt bottom has come off, and if the girdle set has deformed.Any problem of the girdle set may cause safety issues. As it is a component that is prone to wear and tear, the warranty period for it is three months from the issuance of the invoice. Please immediately contact the after sales service by dialing the KAT hotline if any of the above situations occur.Instructions for daily maintenance of three-in-one cable and sensors power supply cableIt is necessary to carry out the daily maintenance of the three-in-one cable and the sensors power supply cable to prevent them from being damaged due to entanglement. Check if the three-in-one cable and the sensors power supply cable have any tangling every day by following the steps below:Step one: entanglement of the three-in-one cable and the sensors power supply cable (tangling): based on the tangling direction, rotate the connecting rod in a reverse direction until the three-in-one cable is separated from the sensors power supply cable. Step two: twisting of the three-in-one cable (twisting, and marked wrinkles can be seen on the outside): take off the head-mounted display, and based on the twisting direction, rotate the display in a reverse direction until the cable returns to the smooth state with no twist.Maintenance
9 Product IntroductionKAT WALK Production IntroductionKAT WALK is a VR multi-direction mobile platform, which is also called VR treadmill. It breaks the virtual and real-life space limit, enabling users in extremely small space in reality to carry out 360° boundless movements in the virtual world through the combination of different components including the VR head-mounted display like HTC Vive or Oculus Rift.Product AppearanceParameters1 Girder2 Hand rail3 Equipment Storage Hook4 Connecting rod5 Support pillar6 Girdle set7 Leg set8 Base plate9 Pedal10 Base plate holder11 Pulley12 LOGO light source kitTotal Weight 225kgHeight 2.8mArea 2.16m²Applicable Height 150cm—190cmApplicable weight ≤100kgData Interface USB2.0 / USB3.0Refresh rate 1000HzProduct frequency range and output power: 2402-2480MHz, 0dbm-4dbm from to that is suitable for waistline 60cm (1.96ft) 120cm (3.9ft)Comfortable and adjustable Attention Cardiac patients are prohibited from using this product!
10 Product IntroductionKAT STATIONProduct IntroductionKAT STATION Control Center, with a high-definition and touch LCD screen as the display and operation platform, integrates the high performance computer, the game software platform and the business operation and management system, providing assistance for businesses in solving purchase, maintenance and management with its one-stop service.Product AppearanceParametersTotal weight of the kit 50kgDesign size 1465mm×600mm×470mmSize of Display Screen 22-inch high-definition wide screen Maximum Resolution 1920*1080Supporting Winodws 10 Power Voltage AC220V±10% 50HZ±1HZPower <200W Instantaneous current upon Switch on 3A Audio Two channel audio with stereo surround amplifier systemAudio Power 2 x 2WAudio Frequency Response 20Hz~20KHzFan Industrial axial flow fan, noiseless, circulating heat dissipation Working Environment Temperature: +0℃~+40℃ Humidity: 40%~80% (relative, non-reduced pressure)Network Interface RJ45 Attention In case the screen of STATION is accidentally turned off during the use of the product,the screen switch is hidden in the switch plate cover on the side of the STATION and only the special key from the control center can open the cover.Another accessory key is used for opening the main device and the back cover of the STATION.Please properly keep the two keys and do not randomly open the main device and the back cover of the STATION.
11 Product IntroductionProduct AppearanceKAT SHOESProduct Introduction（Side View） (Bottom View） (Top View）AttentionKAT SHOES are tailored for KAT WALK with a special sole design.Please do not wear the shoes to walk outside KAT WALK base plate for your own safety.KAT SHOES are specially designed for KAT WALK base plate. A fixed friction coefficient is a must for the best game experience where users feel like walking naturally, while KAT WALK provides a good guarantee for it. It makes use of the constant rolling friction to form the footstep curve and displacement produced during walking, and together with the base plate, it ensures the motion trail of legs and feet during natural walking. Thus, KAT SHOES serve as a key balance point for the best experience.
Product Introduction12 Product IntroductionProduct AppearanceKAT SHOE COVER (Bottom View） (Top View）Caution KAT SHOE COVER is dedicated for KAT WALK with a special design. For your own safety, please do not walk in other places than on the KAT WALK base plate in the Cover. Important Indications：Those with * are optional accessories, which need to be purchased separately.KAT SHOE COVER is the dedicated cover designed for the KAT WALK base plate. For the best game experience with the feeling of a natural walk, it is necessary to have a fixed ideal friction coefficient, while KAT WALK produces the foot curves and the displacement in human’s walking through a constant rolling friction, and with the support of the base plate, creates the moving track of legs and feet. As a result, KAT SHOE COVER becomes the key balance point for the best experience. The KAT SHOE COVER doesn’t require you to change your shoes, you can simply wear it on top of your shoes. Reducing the time required to get on the treadmill.
13 Product IntroductionProduct AppearanceVR Head-Mounted DisplayProduct Introduction1 Camera Lens 2 Tracking Sensor3 Head-Mounted Device Button 4 Status Indicator5 Lens Distance KnobCurrently the whole set of KAT WALK is equipped with HTC Vive BE commercial head-mounted display, which includes a head-mounted display, two single hand held controllers and one locating system (Lighthouse) that can simultaneously track display and controller in the space. The controller locating system (Lighthouse) confirms the location of moving objects through laser and photosensitive sensor without having to depend on cameras. In other words, HTC Vive allows users to walk within a certain range and is able to simultaneously scan and locate multiple head-mounted displays and handles in its capture range, which is the biggest difference between it and the other two head-mounted displays - Oculus Rift and PS VR. KAT WALK also supports such mainstream VR head-mounted displays as Oculus Rift.
1４ Product IntroductionProduct Appearance1 Slide Belt 2 Audio Cable3 Three-in-one Connecting Cable 4 IPD (Interpupillary Distance) Knob5 Face Pad 6 Lens7 Distance Sensor1 Microphone2 Nose Pad3 Lens Distance KnobAttention1.As the head-mounted display sensor is highly sensitive, please do not cover or scratch the sensor lens.2.Please make sure the protecting film on the lens has been torn off before putting on the head-mounted device.3.As the VIVE operating handle sensor is highly sensitive, please do not cover or scratch the sensor lens.
1５ Starting InstallationList of items Connecting rod, girdle set and leg setKAT SHOES*8（ 34,35,36，37，38，39，40，41，42，43，44，45 ）Lighthouse Base stations (power adapter, mounting kit and sync data cable)KAT WALK maintenance oilInner hexagon spanner, hook spanner 68-72 and open spanner 22-24Slider*8KAT WALKKAT WALK ShellDismantling andInstallation ToolsBase plate componentSupport pillar componentGirder componentA few connecting cables and one grounding cableKAT SENSORSEquipment Storage hookBase plate shellSupport pillar shellGirder shellGirder casing coverShell fixing sheet metal partsPedalsKAT STATION control centerLink box (power adapter, HDMI cable, USB cable, Mounting pad)HTC VIVE head-mounted display (three-in-one connecting cable, audio cable, earphones, face pad*2 and cleaning cloth)Controllers*2(power adapter, lanyard*2 and Micro-USB data cable*2）KAT SHOES’wheel replacement tools, bolt box, sensor storage box and gloves束线管、束线夹配套贴纸Cable bunch tube and cable bunch clipAncillary pasterMain Device Components
AttentionPlease prepare at least one three-hole socket and four two-hole sockets as there are quite a few cable connections. Note that there must be sufficient distance between sockets as the adapter is quite big.Preparation of ToolsOpen the complimentary KAT WALK special tool box, which contains: one bottle of KAT WALK PREMIUM maintenance oil a set of inner hexagon spanners one hook spanner 68-72 one open spanner 22-24 one KAT SHOES’wheel replacement tool one screw box1６ Starting InstallationInstallation InstructionsAs the set of equipment needs to be supported by KAT STATION and HTC Lighthouse locating system, it is advised that the place for installation shall be at least five meters wide with a floor height of at least three meters.Please make sure to read in details the information provided in this manual prior to the installation of KAT WALK. As the product itself is very heavy, please arrange at least three male adults to do the installation.Keep the power off during installation and avoid potential safety hazards．Please place a sponge pad of over 20cm thick (provided in the packing box) on the ground when installing the support pillar to protect the shell from being damaged.To avoid the influence of electric current, please do not open the girder shell when the product is working.Even when there is no electricity, please do not open it by yourself as doing it without authorization will result in the warranty invalidated.Please do not put KAT WALK PREMIUM in a place where it is dusty, damp, shaky or with drastic temperature changes.　　　　　　
1７ Starting InstallationKAT WALK PREMIUM InstallationKAT WALK DELUXE is quite heavy with a use height of 2.8 meters, and thus the indoor installation floor height should be at least three meters. Please strictly follow the steps to do the installation, and the steps are as follows:NoteAll the bolt serial numbers in the picture are consistent with those in the bolt box.1．Place the base plate on an open floo, and use a spanner to fix the base plate holder to prevent it from sliding.Procedures of Using Base Plate HolderThere are two nuts on the upper and lower part of the base plate holder. The lower nut helps the holder to stretch out and draw back while the upper one helps to fix it. Please make sure the two nuts are fastened when fixing KAT WALK .1）Rotate the upper nut on the base plate holder in clockwise direction to move it down. 2）Rotate the lower nut on the base plate holder in counter clockwise direction to move it up. Now the holder is drawing back and you may move KAT WALK .When it is necessary to fix KAT WALK.1）Rotate the lower nut on the base plate holder in clockwise direction to move it down.2）Rotate the upper nut on the base plate holder in counter counterclockwise direction to move it up. Now the holder is stretching up and you may fix KAT WALK.2.First turn the metal hinges of the product base plate so that they face outward.　　　　　　
1８ Starting Installation3.Remove the two bolts on the support pillar.4.At least two persons lift the support pillar and put it on the product base plate. Turn the hinges to buckle the external 　metal part of the pillar, and make the two holes in the hinges aligned with the holes of the two bolts removed as is 　stated in the last step. Tighten the bolts removed from the pillar.5.Place a foam pad of at least 20cm thick under the support pillar. Slowly put the pillar down and make sure it is 　placed on the pad.The direction of the flange onthe end of the telescopic stick
1９ Starting Installation６.Insert the girder into the support pillar, make the flanges fit with each other,tighten the screws and shims at the 　connection of flanges.7.One person holds the support pillar while other two rotate the girder, making it rotate from a lying position to a 90-degree angle. Then place the bolts at the connection between the girder and the support pillar in the washer, and tighten them to finish the fixing.8.Insert the telescopic stick into the round hole at the front of the equipment, and slot the spring ?pallet and the spring into the stick; then screw the safety nut onto thestick and the M5 set screws (two) to the side of ?the stick; screw the round nut into the stick, and use the hook spanner to tighten it; finally slot the nylon nut into the upper end of the stick and tighten it . 伸缩杆端部的法兰盘必须处于此方向telescopic stickAlways keep the flange onthe end of the stick facing this directionThe direction of the flange onthe end of the telescopic stickThe thick sideof the flangeThe thin side of the flange
20 Starting Installation9.Unpack the HTC VIVE and separately take off the three-in-one data connecting cable for the head-mounted display; push out the hatch cover of the display in a parallel way, unplug the three-in-one data connecting cable (HDMI, USB and DC cable) for the display and properly keep the earphone cable.10.Put the HTC Vive three-in-one data connecting cable (the red line in the following picture) from the lower end of the telescopic stick through the stick until it reaches out of the upper end. Put the sticking cable through the white line channel of the girder (the blue area in the following picture) until it reaches out of the back end of the girder fixed with the clamps on the end of the girder. Attention The spring pallet must be installed upwards in a convex shape! The fastening screw is in the side hole of the upper spring lid and make sure it is fastened tightly, or there will be a risk of toppling!
21 Starting Installation11.Use the inner hexagon spanner to remove the M6×16 screw located in the area as shown in the picture; take out the support plate and one M6×45 screw. Fix the board onto the mechanical structure as shown in the picture.12.Unscrew the U-shape bolts (two) on the top protection cover, put the three-in-one cable into the slot of the U-shape bolts, and re-fasten the bolts onto the cover. Attention A 90cm-long HTC VIVE three-in-one data connecting cable needs to be reserved at the lower end of the telescopic stick (see the mark in the picture)support plateTake out the screwScrew - M6×45
22 Starting Installation13.Use screws to fix the top protection cover onto the girder shell as shown in the picture.14.The installation staff put the support pillar upright and at least one male adult should hold the pillar to prevent it from suddenly toppling, while the others install the fixing bolts at the bottom Attention Please note the direction of the protection cover when fixing it.Fix the screw
23 Starting Installation15.Installation of the connecting rod. One person stands below the telescopic stick and pulls it to the lowest point, one aligns the holes in the connecting rod with those in the connecting panel of the stick, and another one installs the bolts and fixes the rod.16.Install the equipment storage hook (the head-mounted display bracket) to fix the head-mounted display. The bolts have already been fixed on the back of the cushion of the connecting rod head; after unscrewing the bolts, install the hook at the cushion part of the connecting rod head. Screw-D
24 Starting Installation17.Insert the grounding cable on the back of the support pillar one M4 bolt and one M4 inner hexagon spanner.Fix the cable onto the pillar as shown in the picture and make sure the bolt is tightened.18.Loosen the base plate holder and adjust the bottom of the holder to make it higher than the wheels; move KAT WALK to an appropriate location; re-fix the base plate holder to prevent KAT WALK from sliding, and the installation is finished. Back of the support pillarScrew ‒ M4Terminal Attention 1.The proper and stable installation of the support pillar structure serves as guarantee for users’good experience. Therefore, please make sure the pillar structure is properly installed and that the installation is steady. 2.Avoid placing any objects on the base plate during the installation. Do not randomly step on the plate in case of any damage to it, which spoils user’s good experience. 3.After the installation, check if all the bolts and nuts are fastened. 4.Please switch off all the power supply when installing circuits. Make sure all the circuits are power off to avoid any potential danger. 5.As the three-in-one cable of the head-mounted display has limited length, please pay attention to the length of the remaining circuit when doing circuit connection on the girder. 6.Please differentiate the connection conditions of different connections since there are comparatively quite a lot of them. 7.If the bolt holes are not completely concentric when installing bolts, you may slightly rotate the parts to make them concentric.
Installation of KAT WALK PREMIUM ShellWe have equipped the product with KAT WALK PREMIUM shell for the purposes of aesthetics and protecting the mechanical engineering. The shell is made of ABS materials, and if you find any damage to the shell upon receiving it, please timely contact KAT service center.Installation of Support Pillar ShellThe support pillar shell is made up of the right section and the left one connecting with each other. It is divided into four pieces that are located on the upper, lower, right and left side, which are fixed with screws.1.First install the upper part of the shell and tighten it with screws. Two screws along the diagonal line have been installed on the girder, the remaining two screws along the other diagonal line needs to be installed at the connection part between the support pillar shell and the girder, while only one screw needs to be installed at the connection part between the shell and the sheet metal parts. The fixing flange plate is to be placed between the shell and the sheet metal parts.2.After finishing the installation of the upper part, start to install the lower part of the shell. Please note that now only half piece of the shell is to be installed first and only the connection between the shell parts needs to be installed with screws; there is no need to install screws at the screw holes on the lower end of the shell sides Screw-E2Screw-E1Fix the flangePlace the wireinside the housingNo need to fix screwNo need to fix screw25 Starting Installation
When installing the base plate shell, put the shellLED wires through the reserved cable holes3.Now start to install the base plate shell, and first please put the shell LED wires through the reserved cable hole at the lower half part of the support pillar4.Use the screw F to tighten the base plate shell and cover the base plate with the shell.26 Starting Installationtighten the base plateshell with screw-F
5.After the base plate shell is installed, the remaining half-side support pillar shell needs to be installed back to the pillar. Please note that during the installation, the HTC VIVE three-in-one connecting cable and the grounding cable need to be put through the cable hole. The two LED wires on the bottom, the one LED wire on the top and the top sensor wire need to reach out of the shell at the lower end of the support pillar. The three LED wires are to be connected with the power supply of the logo light controller. cable hole Examination after installation of the mechanical structure Please note the following after the installation: Check each screw hole and make sure all the screws or bolts are tightened; Check if there is enough space for heat dissipation surrounding the device and if the air flow is normal; Check if the power socket supply complies with product specifications; Check if each product is correctly connected and if those involved with power supply are correctly connected to the ground; Check if the connection between the KAT STATION control center and other network devices is normal.Connection of Grounding CableFasten the metal end onto the wing bolt in the KAT STATION cabinet as shown in the picture, and put the other end through the cable hole of the cabinet. Insert the other end of the grounding cable on the support pillar into the quick cable connection terminal as shown in the picture and make sure it will not loosen in a natural state.27 Starting Installationcable holethe chassis ofthe control center
Connection of Logo Light Source CableConnect the power adapter of the LED with the logo light controller, and connect the cable connection terminal on the controller respectively with one logo light wire on the top and with two logo light wires on the bottom (sticking out of the shell bottom). Insert the adapter plug into an external power strip.28 Starting InstallationInsert the adapter plug intoan external power stripPower adapterAdapterControllerConnection of VR Head-Mounted Display and Base StationInstall the base stations in diagonals in the surrounding space of the KAT WALK. To obtain the best tracking, the distance between two base stations cannot exceed five meters, and they should be more than two meters above the ground with an inclination angle of 30°~45° around downwards. Please make sure no object blocks the board in the front.You may refer to the user manual for head-mounted display for the detailed installation procedures.With the completion of the cable arrangement for the three-in-one connecting cable of the head-mounted display, the three cables sticking out of the girder head need to be inserted into their corresponding socket as per instructed in the user manual for head-mounted display. The other end sticks out along the cable hole of the support pillar shell and connects with the link box and with the KAT STATION and the power strip.You may refer to the user manual for head-mounted display for the detailed cable connection requirements and attention items.Three-in-one connecting cableon the HTC VIVE head-mounted displaytelescopic stick

Navigation menu