Hangzhou Hikvision Digital Technology CSREM Remote Control User Manual

Hangzhou Hikvision Digital Technology Co., Ltd. Remote Control

User Manual

8'/%$Quick Start GuidePlease read the quick start guide carefully and keep it properly.
4Table of Contents6Packing ListCamera AppearanceOperation EZVIZ SPORTS APP S1 Features S1 Connects to Display Appendix Modes Description Appendix Parameters Description Restricted substances or elements identificationS1 Remote ControlAppearanceMain MenuOperation
5Open the packet and check whether the S1 sports camera (Hereinafter referred to as S1) and all accessoriess is in good condition.S1 X1Power Adaptor X1 Quick Start Guide X1USB Data Cable X1Packing List
61243567891110131214Appearance Description
71Shutter Start/Stop Shooting2Camera Status IndicatorBlue steady: Standby; Flicker: Camera is on.3MIC Audio Input4Lens 152°Wide Angel5Red light steady when charging.Red light off when fully charged.6USB Port USB data trasferMicro SD Card Recommendation78micro HDMI HDMI Output91011121314Power Button Press and hold for 1 second to power on, 3 seconds to power off.Reset Reset button.Wi-Fi IndicatorPurple filcker: Wi-Fi is turning on.Blue Flicker: Wi-Fi is on.Wi-Fi On/Off Button Press and hold 3 seconds to switch the Wi-Fi on or off. Interface to all brackets.Standard BracketInterface(1/4 inch)Buzzer Audio Alert705705705705Micro SD Card SlotPower Camera Indicator
8Step 1Micro SD Card RecommendationInsert the micro SD card into the card slot.Insert micro SD card.Operation
9Step 2Use the USB cable to charge. When the power indicator goes off, the power is fully charged.Press the for one second, and you will hear the buzzer alerts 5 times. The indicator blinks in purple. When the indicator turns steady blue, the S1 is power-on and standby.You are recommended to fully charge the S1 when it is the first time you use it.Press the power button and the Wi-Fi button at the same time to restore the default settings.Power on the camera.Connect the power cable.Power on the camera.
10Step 3Press record button once,the camera starts recording, and the camera indicator flickers in blue.Press record button, the camera stops recording, and the camera indicator is onYou can choose to switch record, capture, burst snapshot with EZVIZ SPORTS App.If no operation with in 120 seconds, the S1 camera shuts down automatically.Start RecordingStart recording.Stop recording.
11Step4You can connect to the S1 to the display to vide the video and picture.Connect the S1 camera and the display with a HDMI wire. Press the the power button and the record button at the same time and then you can view the video and picture stored on the micro SD card on the display.DisplayHDMI Cablemini HDMI InterfaceConnect to the display.
12Download and install the EZVIZ App, you can get the live video, playback and control the camera.Use the mobile phone to scan the QR code or search in the App Store to download the EZVIZ SPORTS App. Download EZVIZ SPORTS App.EZVIZ SPORTS APP
13Press the Wi-Fi button for 3 seconds. When the status indicator flickers in blue, the Wi-Fi is on.Turn on the Wi-Fi of your mobile phone.Default Wi-Fi Name: EZVIZ_XXXXDefault Wi-Fi Password: 1234567890You can change the Wi-Fi password and name of the camera with the app.After restore default settings, the Wi-Fi name and Wi-Fi password are restored to default.Turn on Wi-Fi of the S1 camera.Connect the Wi-Fi of the camera and your phone.
145HFRUG 7DNH3KRWR 6KDUH…Open EZVIZ SPORTS App. You can set the parameters as you requested.After configuration, you can use the App to record, take photo, share your video and so on.What you can do with EZVIZ SPORTSS1
16S1 Remote ControlUser Manual
1234561Display OLED Display2Power IndicatorRed steady when charging;Blue steady when fully charged.3Return/Set ButtonPress to enter setting interface of the current function˗When in the sub-menu, press to return upper level menu.4Sensor UV Sensor5Switch ButtonSwitch to next mode or parameters6Power Button/OK ButtonPress to power on; press and hold for 3 seconds to power off˗When setting, press to enter.7USB PortExternal power supply (you can use the USB cable and power adaptor of S1.)717AppearanceDescription
1280-6038:35/59:421235461S1 Current Mode2The first number indicates the resolution of video or photo. TheC second is the capture speed and delay interval.3Time already recorded and time left for recording/ Captured picture and picture number left for photo46Apprears when bluetooth is connected.5S1 Current BatteryLooping (Appears only in recording mode.) :Recording :Burst :Photo :Delay captureGUI DescriptionSee Appendix for detailed main menu modes descripion.18OSD Description
Use the USB port to charge the battert, when the power indicator goes steady blue, the battery is fully charged. The battery life is 30 days.Press , the remote is on. EZVIZ logo, verision, battery, bluetooth and S1 status will be displayed.Buttons are invalid when the remote is starting up.The remote shuts down automatically if it is not connected to the S1 in 30 seconds.V1.2.2BLUETOOTHREMOTEBLUETOOTHCONNECTEDS1 POWER ONLO A DI NG . . .19Connect the powerStart up the remoteOperation
20Press the and the button at the same time the remote starts searching the S1 nearby. 1The remote and the S1 are paired by default. If tou use the remote to control another S1,or if you find the bluetooth icon flickers when starting up, you need to pair them before any operation.SEARCHING...Pair the S1 and the remote
21If the S1 is not found, it shows“S1 NOTFOUND”and then the remote shuts down automatically.You can restart the S1 and the remote and pair then again.SI NOT FOUNDAfter power on S1 for 10 seconds, the remote can find the S1 serial No..2EXIT123456789
22The remote enters the main menu, see the following figure.DŽPress to switch to your S1 and press to pair them.3BLUETOOTHCONNECTED1280-6038:35/59:42
23BLE CLEAREDNEED RESETPress and to reset the remote to cancel the pairing.2Enter the main menu and press and for 5 seconds. 1You can also cancel the pairing.Cancel remote and S1 pairing (Optional)
24Set S1 parameters as you demand.Enter the main menu and press , until the setting interface shows. Press to enter the setting menu.˖Switch to next item.˖Enter˖Return to previous item.After the S1 is powered off, the remote shows“POWER ON S1”. If you don’t power it on for 120 seconds, the remote shuts itself down automatically.Start up the remote, if the S1 is powered off, you can power it on with the remote.POWER OFF S1 POWER ON S1Enter the main menu and press and SettingsPower on/off S1Cancel remote and S1 pairing (Optional)
25Enter the main menu and press , until the You can press the and button to reset the remote. (Invalid when charging)When the remote is powered off for 20 minutes the bluetooth of S1 stops broadcasting. If you power on the remote, you need to press the power button of S1 or restart the S1 manually to pair the S1 and remote.Choose the setting you want to set, press the to enter the setting interface directly. (QWHUPDLQPHQXPress the to execute the current command.E.g. Press the button when in burst mode. The S1 starts burst capture with the preset parametersPress the button for 3 seconds to shut the remote down. No operation for 120 seconds, the remote goes to hiberate mode to save battery.Press the button to activate the remote.S1 OperationShut down the remote
26Choose the setting you want to set, press the to enter the setting interface directly.HDMIYou can connect the S1 to a display to view the photo and video stored.Connect the S1 and display with HDMI wire, power on S1, and the remotes shows “HDMI”.Press to switch; Press to confirm.S1 Connecting to Display
27In the main menu of the reomte, thera are photo, burst, Delay, UV and power on/off S1.In photo mode, press the button on the remote or the button on S1 to start recording. And in the remote, recording time is displayed.In photo mode, press the button on the remote or the button on S1 to stop recording. And in the remote, remaining recording time is displayed.1280-6000:011280-6038:35/59:42Appendix Modes DescriptionRecord Mode
28In photo mode, press the button on the remote or the button on S1 to take a photo. After taking the photo, the number of photo captured and the remaining capacity for photo are changed.12M386 / 532Photo Mode
29After burst capture, S1 is in standby mode. In burst mode press the button on the remote or press the record button on S1 to start capture. Burst CaptureCapture many photos in a certain time;E.g.5PCS/1S,10PCS/1S,10PCS/2S,30PCS/1S,30PCS/2SWhen you set it as 10PCS/2S, S1 captures 10 photos in 2 seconds.10PCS/2S386 / 532Burst Mode
30Press the button on the remote or press the button on the S1 camera to start delay capture. Press the button again to stop capture.Capture after a pre-defined time.E.g., when set the delay time as 0.5SEC, press the record/capture button, the camera capture 1 photo after 5 seconds.12M386 / 5320.5SECDelay Capture
31̚ No protection required.Wear sunhat and sunglassesMedium ̚Strong ̚ Wear sunhat, sunglasses and sunblocking cream.Very Strong ̚ Better not go outside between 10 ap and 4pm.Better not go outside.ExtremelyStrongWeakThe remote can detect the UV indicators outdoor to provide information for you to choose protection.309UV Level WeakUV ValueUV LevelUV Detector Mode
32POWER OFF S1Press button when the menu shows”POWER OFF S1”to power it off.Press button when the menu shows”POWER ON S1”to power it on. You can set the S1 parameters with the remote. E.g. video resolution, recording mode and so on.Power on/off S1Parameters Setting
33VideoResolutionParametersRecording ModePhoto Resolution1920*1080 60fps˗1920*1080 30fps˗1280*720 120fps˗1280*720 60fps˗848*484 240fpsDescriptionIn order: The camera indicator goes bsteady blue. And you cannot record or take photo when micro SD has no space. Looping˖Video and photo stored in the micro SD card are overwitten after SD card is full.Restricted by the file system formate, a video size cannot be more than 4G, it will be seperated it is over 4608*3456˄16MP˅˗3840*2880˄12MP˅˗3264*2448 ˄8MP˅˗2592*1944 ˄5MP˅Appendix Parameters Description
34ParametersDescriptionG-SensorEnabling the G-sensor, S1 starts recording when senses acceleration and stops recording when motion stops for 20 secondsSD Card StorageCheck SD card space and free space. Delete latest file or all files.Delay CaptureBurst CaptureWi-FiGPSTurn on/ off Wi-FiEnabling the GPS function, the latitude and longitude data of the video or photo is contained. The longitude and latitude information can be viewed with subtitle for video and EXIF tool for photo)Capture after a pre-defined time; 0.5SECǃ1SECǃ2SECǃ5SECǃ10SECǃ30SECǃ60SECCapture many photos in a certain time; E.g.5PCS/1S,10PCS/1S,10PCS/2S,30PCS/1S,30PCS/2S
35ParametersDescriptionRemote StandbyVersion InfoSet the remote into standby time. You can choose 120 seconds or cancel it.Check the information.
36PartsRestricted substances and elements declaration3E +J &G &UĎ 3%% 3%'(Medalh    Lensh    Curciut Boardh    Plastic     Displayh    Powerh    Controllerh    Accesoriesh    żPHDQVWKHWR[LFDQGKDUPIXOVXEVWDQFHVLQWKHDVVHPEO\units are within the limit stipulated by the of the SJ/T11363-2006 standard.× means the toxic and harmful substances in the assembly units exceed the limit stipulated by the SJ/T11363-2006 standard.Restricted Substances and Elements
37

Navigation menu