Haisen Technology HDM02 5.8G microwave sensor module User Manual HD401S TUV

Shenzhen Haisen Technology Co.,Ltd 5.8G microwave sensor module HD401S TUV

Contents

Host User Manual

Specifications subject to change without notice.©All rights reserved. Haisen Technology | 01Hold-time Daylight thresholdDetection areaOn/off controlTechnical data01HD401SOn/off control INPUTOUTPUTDaylight sensorDaylight thresholdHold TimeDetection RangeInstallation holeDetection areaIP20120~277 VAC 50/60HzMax.200W(Control gear) Max.400W(Incandescent lamp)<1W10%/50%/75%/100%5s/90s/5min/15min2Lux/10Lux/50Lux/Disable5.8GHz±75MHz<0.3mW4-pole pluggable clamp terminal(L,N,N,L’)for 1.5mm2cableMax.6m(ceiling mounted),Max.3m(wall mounted)Max.14m(ceiling mounted),Max.10m(wall mounted)-20°C~+55°C80.2X36.6X23mmcULus listed,FCCOperating voltageSwitching capacityStandby powerHold-timeDaylight thresholdMicrowave frequencyMicrowave powerDetection rangeOperating termperatureIP ratingCertificateInterfacesMounting heightSize
Haisen Technology | 02Shenzhen Haisen Technology Co., Ltd., Tel: +86-755-82598105 丨Fax: +86-755-82598106丨Email: info@haisensz.com 丨www.haisensz.com02Application03Mechanical structure(mm)04Application05Wiring diagramFunction Demo - On/off control 80.271.465936.6421223When motion detected, insufficient daylight,light ON. When motion detected, but sufficient daylight,,light remains OFF.Hold timeAfter the last detection and the present Hold time elapsed,light OFF.Disable50lux10lux2luxDetection area means detection coverage. lt can be adjusted by combining DIP swithches for specific application.Hold-time means the time period the light will be ON after the last detection.Daylight sensor priors to motion sensor.Set threshold for specific needs. lf Disable, only motion sensor works.Detection area Hold-time Daylight threshold5s90s5min15min100%75%50%10% Switch UP Switch DOWN
We are responsible for additional testing to verify compliance as a composite system. When testing the host device for compliance with Part 15 Subpart B, we have verify that our product compliance with Part 15 Subpart B while the transmitter module(s) are installed and operating. The modules should be transmitting and the evaluation should confirm that the module's intentional emissions are compliant (i.e. fundamental and out of band emissions). We have verify that there are no additional unintentional emissions other than what is permitted in Part 15 Subpart B or emissions are complaint with the transmitter(s) rule(s).

Navigation menu