Hafele and Co KG ELLIPTAUSB UNIVERSAL POST BASE User Manual Hi Speed USB2 0 4 Port Hub V0

Hafele GmbH & Co KG UNIVERSAL POST BASE Hi Speed USB2 0 4 Port Hub V0

Users Manual

Hi-Speed USB2.0 4-Port Hub User Manual TABLE OF CONTENTS Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.1 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.2 Technical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . 3 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Introduction
1. Introduction Please read this manual thoroughly and follow theprocedures to prevent any damage to the 4 Port Hub and/or to the connected devices. Congratulations and thank you for purchasing our product .the In stand Hi-Speed USB 2.0 4-Port Hub. and deliver with high performance, lower power consumption for USB connective. Base Multiple Transaction Translator (MTT) architecture technology,the Hub provides faster data link between PC to you desktop USB device. four downstream USB ports that offer backward-compatible, Plug-and-Play connectivity with all USB devices, including USB 1.1 (12MHz) or low- (1.5MHz) and full-speed (480MHz) devices, as well as with USB 2.0 (or high-speed) devices. This includes such peripherals as scanners, printers, mass-storage devices, and high-resolution cameras. and more. The Hub is USB Bus-powered, and with 1 USB power extend plug which allows total 1A current suck from PC to Hub side ((Max =1A,), drive with high current devices such external USB-HDD storage and without external power require (only for HDD ≤500mA). The Hub is uniquely designed to allow the user to position the four downstream ports toward the back of the desktop for efficient cable management, or to the front of the desktop for easier port access.
2. OVERVIEW Features • Compliant with Universal Serial Bus specification 2.0 (data rate 1.5/12/480Mbps) • Backward-compatible with Universal Serial Bus specification 1.1 (data rate 1.5/12Mbps) • Compatible with Windows. 98 SE, Me, 2000, and XP • Supports Plug-and-Play specifications • Over-current detection and protection • Four 480Mbps downstream ports • Fully compatible with USB 1.1 and USB 2.0 devices • Multiple hubs may be serial with other one another • Upsream port can extend longer cable for distance. Package Contents • In stand 4 Ports High speed USB hub /With 2 plug USB Cable • User manual 3. Technical Specifications Upstream Ports (1)+ Power Extend Ports(1) Downstream Ports (4) Per-Port Voltage DC +5V Per Port Current 100mA @ Power extend port not connect PC Max Port Current 500mA @ Power entend port connected PC Total Port Current < 1000mA @ Power entend port connected PC Auto Off if no devive presence, current < 1mA No operation current < 50mA Operating Temperature 5o C ~ 40o C Storage Temperature -20o C ~ 60o C
4. INSTALLATION Important Note: Please do not connect any High current (>500mA )USB devices to the Hub directly or attach high current (>100mA,<500mA) device until instructed to do so in step 2 of this installation procedure. Otherwise possible can’t start you computer , or damage you computer or USB-HDD storage!!! Please use extend power for you high current devices (>500mA) before attach to the USB-Hub. 1. Plug USB-A power extend plug to PC.( Short one cable), then USB-Hub can provide >100mA current to each downstream ports. ( USB standard ports can only supply current ≤500mA, two USB plug extend total current to 1000mA -- including Hub self consume) 2. Plug the flat end of USB cable into the downstream port of your computer or downstream port of another Hub. Important Note: The Hub must be connected to a USB 2.0-compliant host in order to function in high-speed mode (480Mbps data rate). If the Hub is connected to a USB 1.1-compliant host, it will operate only in low-speed or full-speed mode (1.5Mbps/12Mbps). 3. Windows will now detect your Hub and install the required driver support. (The Windows “Install New Hardware Wizard” may prompt you to provide your Windows Installation CD to complete the driver installation process). 3. Plug the USB-A connector of the USB device, or an additional hub,into any of the downstream ports of the Hub. Important Note: When moving a device from one port on the Hub to another, it may be necessary to reinstall the USB drivers for that device.
FCC WARNING This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. NOTE: The manufacturer is not responsible for and radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.

Navigation menu