HYUNDAI MOBIS PA965HMLSDB Car audio bluetooth User Manual HM09 usa 4c audio 151

Hyundai MOBIS Co., Ltd. Car audio bluetooth HM09 usa 4c audio 151

User manual

FCC ID: PINPA965HMLSDB / IC: 4018A-PA965HM HCT CO., LTD. SAN 136-1, AMI-RI, BUBAL-EUP, ICHEON-SI, KYOUNGKI-DO, 467-701, KOREA TEL:+82 31 639 8517 FAX:+82 31 639 8525 www.hct.co.kr Report No. : HCT-RF09-0503 1/1 ATTACHMENT E. - User Manual -
Features of your vehicle1224AntennaD300102AHM-EUYour vehicle uses a roof antenna or glassantenna to receive AM or/and FM broad-cast signals.The roof antenna is removable. Toremove the roof antenna, turn it counter-clockwise. To install the roof antenna,turn it clockwise.AUDIO SYSTEMOHM048154NOHM048235NRoof antennaGlass antennaCAUTION• Before entering a place with a lowheight clearance, be sure that theroof antenna is removed.• Be sure to remove the roof anten-na before washing the car in anautomatic car wash or it may bedamaged.• When reinstalling your roofantenna, it is important that it isfully tightened and adjusted tothe upright position to ensureproper reception. But it could beremoved when parking the vehi-cle or when loading cargo on theroof rack.• When cargo is loaded on the roofrack, do not place the cargo nearthe antenna pole to ensure prop-er reception.CAUTION• Do not clean the inside of the rearquarter glass with a cleaner oruse a scraper to remove any for-eign deposits as this may causedamage to the antenna elements.• Avoid adding metallic coatingsuch as Ni, Cd, and so on. Thesecan interfere with FM reception.
4 123Features of your vehicleD300200AENSteering wheel audio control (if equipped) The steering wheel audio control buttonis installed to promote safe driving.D300204AHMVOLUME (VOL / ) (1)• Pull the up button ( ) to increase thevolume.• Pull the down button ( ) to decreasethe volume.D300203AHMSEEK/PRESET ( / ) (2)The SEEK/PRESET button has differentfunctions based on the system mode.For the following functions the buttonshould be pressed for 0.8 second ormore.RADIO modeIt will function as the AUTO SEEK selectbutton.CDP modeIt will function as the FF/REW button.CDC modeIt will function as the DISC UP/DOWNbutton.If the SEEK/PRESET button is pressedfor less than 0.8 second, it will work asfollows in each mode.RADIO modeIt will function as the PRESET STATIONselect buttons.CDP modeIt will function as the TRACK UP/DOWNbutton.CDC modeIt will function as the TRACK UP/DOWNbutton.D300202AENMODE (3)Press the button to select Radio or CD(compact disc) / USB / AUX.D300205AHMMUTE (4)• Pull the MUTE button to cancel thesound.• Pull the MUTE button again to activatethe sound.Detailed information for audio controlbuttons is described in the followingpages in this section.OHM048146NCAUTIONDo not operate audio remote con-trol buttons simultaneously.
Features of your vehicle1244D300600AHM-EEAux, USB and iPod port(if equipped)If your vehicle has an aux and/orUSB(universal serial bus) port or iPodport, you can use an aux port to connectaudio devices and an USB port to plug inan USB and also an iPod port to plug inan iPod.✽NOTICEWhen using a portable audio deviceconnected to the power outlet, noise mayoccur during playback. If this happens,use the power source of the portableaudio device.D300800AHMHow vehicle audio worksAM(MW, LW) and FM radio signals arebroadcast from transmitter towers locat-ed around your city. They are intercept-ed by the radio antenna on your vehicle.This signal is then received by the radioand sent to your vehicle speakers. When a strong radio signal has reachedyour vehicle, the precise engineering ofyour audio system ensures the best pos-sible quality reproduction. However, insome cases the signal coming to yourvehicle may not be strong and clear. Thiscan be due to factors such as the dis-tance from the radio station, closeness ofother strong radio stations or the pres-ence of buildings, bridges or other largeobstructions in the area.AM(MW, LW) broadcasts can bereceived at greater distances than FMbroadcasts. This is because AM(MW,LW) radio waves are transmitted at lowfrequencies. These long, low frequencyradio waves can follow the curvature ofthe earth rather than travelling straightout into the atmosphere. In addition, theycurve around obstructions so that theycan provide better signal coverage.JBM002AM(MW, LW) receptionJBM001FM receptionOHM048151
4 125Features of your vehicleFM broadcasts are transmitted at highfrequencies and do not bend to follow theearth's surface. Because of this, FMbroadcasts generally begin to fade atshort distances from the station. Also,FM signals are easily affected by build-ings, mountains, or other obstructions.These can result in certain listening con-ditions which might lead you to believe aproblem exists with your radio. The fol-lowing conditions are normal and do notindicate radio trouble:• Fading - As your vehicle moves awayfrom the radio station, the signal willweaken and sound will begin to fade.When this occurs, we suggest that youselect another stronger station.• Flutter/Static - Weak FM signals orlarge obstructions between the trans-mitter and your radio can disturb thesignal causing static or fluttering nois-es to occur. Reducing the treble levelmay lessen this effect until the distur-bance clears.• Station Swapping - As a FM signalweakens, another more powerful sig-nal near the same frequency maybegin to play. This is because yourradio is designed to lock onto the clear-est signal. If this occurs, select anoth-er station with a stronger signal.• Multi-Path Cancellation - Radio signalsbeing received from several directionscan cause distortion or fluttering. Thiscan be caused by a direct and reflect-ed signal from the same station, or bysignals from two stations with closefrequencies. If this occurs, selectanother station until the condition haspassed.JBM005JBM004JBM003FM radio station
Features of your vehicle1264Using a cellular phone or a two-wayradioWhen a cellular phone is used inside thevehicle, noise may be produced from theaudio equipment. This does not meanthat something is wrong with the audioequipment. In such a case, use the cellu-lar phone at a place as far as possiblefrom the audio equipment.Care of discs• If the temperature inside the vehicle istoo high, open the vehicle windows forventilation before using your vehicleaudio.• It is illegal to copy and use MP3/WMAfiles without permission. Use CDs thatare created only by lawful means.• Do not apply volatile agents such asbenzene and thinner, normal cleanersand magnetic sprays made for ana-logue disc onto CDs.• To prevent the disc surface from get-ting damaged. Hold and carry CDs bythe edges or the edges of the centerhole only.• Clean the disc surface with a piece ofsoft cloth before playback (wipe it fromthe center to the outside edge).• Do not damage the disc surface orattach pieces of sticky tape or paperonto it.• Make sure objects other than CDs arenot inserted into the CD player (Do notinsert more than one CD at a time).• Keep CDs in their cases after use toprotect them from scratches or dirt.• Depending on the type of CD-R/CD-RW CDs, certain CDs may not operatenormally according to manufacturingcompanies or making and recordingmethods. In such circumstances, if youstill continue to use those CDs, theymay cause the malfunction of yourvehicle audio system.✽NOTICE - Playing anIncompatible CopyProtected Audio CDSome copy protected CDs, which do notcomply with the international audio CDstandards (Red Book), may not play onyour vehicle audio. Please note that ifyou try to play copy protected CDs andthe CD player does not perform correct-ly the CDs maybe defective, not the CDplayer.CAUTIONWhen using a communication sys-tem such a cellular phone or a radioset inside the vehicle, a separateexternal antenna must be fitted.When a cellular phone or a radio setis used with an internal antennaalone, it may interfere with the vehi-cle's electrical system and adverse-ly affect safe operation of the vehi-WARNINGDon't use a cellular phone whenyou are driving. You should stop ata safe place to use a cellular phone.
4 127Features of your vehiclePA910HMU (CDP)1. FM/AM Selection Button2. Power ON/OFF Button and VolumeControl Knob3. Automatic Channel Selection Button 4. SCAN Selection Button5. Preset Selection Button6. TUNE/AUDIO Knob7. MUTE Button RADIO, SET UP, VOLUME CONTROL■Type A
Features of your vehicle1284PA960HMU (CDC)1. FM/AM Selection Button2. Power ON/OFF Button and VolumeControl Knob3. Automatic Channel Selection Button 4. SCAN Selection Button5. Preset Selection Button6. TUNE/AUDIO Knob■Type B
4 129Features of your vehiclePA965HMU (CDC_RSE)1. FM/AM Selection Button2. Power ON/OFF Button and VolumeControl Knob3. Automatic Channel Selection Button4. SCAN Selection Button5. Preset Selection Button6. TUNE/AUDIO Knob■Type C
Features of your vehicle1304How to Activate RADIO, SET UP, VOLUME Control1. FM/AM Selection Button The FM/AM button toggles between FMand AM. Listed below are the paths asthe system switches from FM to AM andback to FM.• FM/AM : FM1➟FM2➟AM➟FM1...• FM : FM1➟FM2➟FM1...2. Power ON/OFF Button &Volume Control Knob• Turns the audio system on/off whenthe ignition switch is on ACC or ON.• If the knob is turned clockwise/counter-clockwise, the volume will increase/decrease.3. Automatic Channel SelectionButton• When the [TRACK ] is pressed, itwill automatically tune to the next lowerstation. • When the [SEEK ] is pressed, it willautomatically tune to the next higherstation.4. SCAN Selection Button• When the button is pressed, it auto-matically scans the radio stationsupwards.• The SCAN feature steps through eachstation, starting from the initial station,for ten seconds.• Press the [SCAN] button again to stopthe scan feature and to listen to thecurrently selected channel.5. Preset Selection Button• Press [1]~[6] buttons less than 0.8 sec-ond to play the station saved in eachbutton.• Press [1]~[6] button more than 0.8 sec-ond or longer to save the current sta-tion to the respective button with abeep.6. TUNE/AUDIO KnobIf the knob is turned clockwise/counter-clockwise, the frequency will increase/decrease.(AM 10kHz, FM 200kHz)■Audio Setup MODE Press and Rotate [AUDIO] repeatedly tochoose the desired mode. Each press changes the mode as below :(Hierarchy 4 (AUTO VOLUME CON-TROL) mode is only selected in the CDP.)• Hierarchy 1• Hierarchy 2
4 131Features of your vehicle❈For example: To Adjusting SIRIUSDISPLAY• Press [AUDIO] to activate SETUPmode, then Hierarchy 1 is selected.• Rotate [AUDIO], to select the SAT con-trol mode.• Rotate [AUDIO] to select the SIRIUSDisplay mode.• If [AUDIO] is not pressed/rotated for 5seconds after adjusting, the displayautomatically returns to normal mode.- Another adjusting mode can be usedfor same operation. 7. MUTE Button(CDP ONLY)Press [MUTE] to stop the sound and"MUTE" is displayed on the LCD.
Features of your vehicle1324PA960HMU (CDC)1. CD Loading SLOT2. CD Eject Button3. RANDOM Play Button4. Automatic Track Selection Button5. REPEAT Play Button6. CD Indicator7. CD Selection Button8. SCAN Play Button9. Track(File) Search Knob and ENTERButton10. Folder search Button 11. INFORMATION Button CDP
4 133Features of your vehiclePA960HMU (CDC)1. CD Loading Slot2. CD Eject Button3. RANDOM Play Button4. Automatic Track Selection Button5. REPEAT Play Button6. CD Indicator7. CD Selection Button8. SCAN Play Button9. Track(File) Search Knob and ENTERButton10. Folder search Button11. INFORMATION Button12. DISC UP/DOWN Button13. CD Loading Button(a). CD Number Indicator field(b). CD Slot indicatorCD CHANGER■Type A
Features of your vehicle13441. CD Loading Slot2. CD Eject Button3. RANDOM Play Button4. Automatic Track Selection Button5. REPEAT Play Button6. CD Indicator7. CD Selection Button8. SCAN Play Button9. Track(File) Search Knob and ENTERButton10. FOLDER Search Button11. INFORMATION Button12. DISC UP/DOWN Button13. CD Loading Button(a). CD Number Indicator field(b). CD Slot indicatorPA965HMU■Type B
4 135Features of your vehicleHow to Activate CDP/CD CHANGER1. CD Loading Slot• Please place the CD with the printedside upward, and then gently push in. • CDP models support both 8cm and 12cm CDs.• CDC models support only 12 cm CD.• If VCD, Data CD, DVD are loaded,"MEDIA ERROR" message will appearand the CD will eject. 2. CD Eject Button• Press this button to eject the CD duringCD playback.• If there is no CD in the deck, "NODISC" will be displayed for 5 secondsand returns to the previous mode.❈ ALL EJECT(CDC ONLY)Press this button for more than 0.8second to eject all discs inside thedecks in the respective order.3. RANDOM Play ButtonPress this button for less than 0.8 secondto activate 'RDM' mode and more than0.8 second to activate 'ALL RDM' mode.• RDM : Only files/tracks in a folder/discare played in random sequence.• ALL RDM (MP3/WMA Only) : All files/tracks in a folder/disc are played inrandom sequence.4. Automatic Track Selection Button• Press [TRACK ] to return to thebeginning of the current track(file).Press again within 1 seconds to returnto the previous track(file).• Press and hold [TRACK ] to initiaterewind search.• Press [SEEK ] for less than 0.8 sec-ond to advance the next track(file).• Press and hold [SEEK ] to initiatefast forward search.CAUTION Don’t insert a CD, if CD indicator isilluminated in the CDP.
Features of your vehicle13645. REPEAT Play ButtonPress this button for less than 0.8 secondto activate 'RPT' mode and more than 0.8second to activate 'FLD RPT' mode.• RPT : Only a track(file) is playedrepeatedly.• FLD RPT(MP3/WMA Only) : Only filesin a folder are played repeatedly.6. CD Indicator(CDP ONLY)When the ignition switch is in the ACC orON position and if the CD is loaded, thisindicator is illuminated.7. CD Selection Button• If the CD is loaded, turns to CD mode.• If there is no Disc in the deck, it dis-plays "NO DISC" for 5 seconds andreturns to the previous mode. 8. SCAN Selection ButtonPlays back the first 10 seconds of eachsong in the CD. 9. Track(File) Search Knob andENTER Button• Turn this knob clockwise to display theTrack NO(File name) after the currentsong.• Turn this button counterclockwise todisplay the Track NO(File Name)before the current song.• To select the displayed song, press thebutton.10. FOLDER Search Button • Folder name/File name(the first song inthe folder) is moved up or down fromthe currently playing folder. • To select the displayed folder, pressENTER(NO.10) button.11. INFORMATION ButtonDisplays the information of the currentCD TRACK(FILE) as below when the but-ton is pressed each time. • CDDA : Disc Title➟Disc Artist➟Track Title➟Track Artist➟Total Track... (not displayed ifthe information is not available on the DISC)• MP3/WMA : File Name➟Title➟Artist➟Album➟Folder Name➟Total File...12. DISC UP/DOWN Button(CDC ONLY)Disc is moved up or down from the cur-rently playing disc. 13. CD Loading Button(CDC ONLY)How to load a CD• Press [LOAD] for less than 0.8 second.• An empty slot is selected and the CDnumber indicator(a) blinks on the LCD. • After "WAIT" is displayed for a moment,"INSERT DISC(1~6)" is diplayed andthe CD slot indicator(b) blinks.• Insert a CD while the slot indicatorblinks.How to load CDs(ALL Load)• Press [LOAD] for more than 0.8 sec-ond.• An empty slot is selected and the CDnumber indicator(a) blinks on the LCD. CAUTION • Insert a CD only while "InsertDisc(1~6)" is displayed and theslot indicator blinks.• Don't insert two CDs for one oper-ation.
4 137Features of your vehicleCAUTION IN USING USB DEVICE• To use an external USB device,make sure the device is notmounted when starting up thevehicle and mount the deviceafter starting up.• If you start the vehicle when theUSB device is mounted, it maydamage the USB device. (USB isnot ESA.)• If the vehicle is started up orturned off while the external USBdevice is connected, the externalUSB device may not work.• It may not play inauthentic MP3 orWMA files.1) It can only play MP3 files withthe compression rate between8Kbps~320Kbps.2) It can only play WMA musicfiles with the compression ratebetween 8Kbps~320Kbps. • Take cautions for static electricitywhen mounting or dismountingthe external USB device.• An encoded MP3 PLAYER is notrecognizable. (Continued)(Continued)• Depending on the condition ofthe external USB device, the con-nected external USB device canbe unrecognizable.• When the formatted byte/sectorsetting of External USB devices isnot either 512BYTE or 2048BYTE,then the device will not be recog-nized.• Use only a USB device formattedto FAT 12/16/32.• USB devices without USB IFauthentication may not be recog-nizable.• Make sure the USB connectionterminal does not come in contactwith human bodies or externalobjects.• If you repeat mounting andunmounting the USB device in ashort period of time, it may breakthe device.• You may hear a strange noisewhen mounting or dismounting aUSB device. (Continued)(Continued)• If you dismount the external USBdevice during playback in USBmode, the external USB devicecan be damaged or malfunction.Therefore, mount the external USBdevice when the engine is turnedoff or in another mode.• Depending on the type and capac-ity of the external USB device orthe type of the files stored in thedevice, there is a difference in thetime taken for recognition of thedevice, but this is not an indicatorof trouble and you only have towait.• Do not use the USB device for otherpurposes than playing music files.• Use of USB accessories such asrecharger or heater using USB I/Fmay lower performance or causetrouble.• If you use devices such as a USBhub purchased separately, thevehicle’s audio system may notrecognize the USB device.Connect the USB device directlyto the multimedia terminal of thevehicle. (Continued)
Features of your vehicle1384(Continued)• If USB device is divided by logicaldrives, only the music files on thehighest-priority drive are recog-nized by car audio.• Devices such as MP3 Player/Cellular phone/Digital camerathose are not recognizable bystandard USB I/F can be unrecog-nizable.• USB devices other than standard-ized goods (METAL COVER TYPEUSB) can be unrecognizable.• USB flash memory reader (suchas CF, SD, microSD, etc.) or exter-nal-HDD type devices can beunrecognizable.• Music files protected by DRM(DIGITAL RIGHTS MANAGEMENT)are not recognizalbe.• The data in the USB memory maybe lost while using this AUDIO. Itis recommeded to back up impor-tant data on a personal storagedevice. (Continued)(Continued)• Please avoid using USB memoryproducts which can be used askey chains or cellular phoneaccessories as they could causedamage to the USB jack. Pleasemake certain only to use plug typeconnector products as shownbelow.
4 139Features of your vehiclePA910HMU (CDP)1. RANDOM Play Button2. Automatic Track Selection Button3. REPEAT Play Button4. USB/AUX/iPod Selection Button5. INFORMATION Button6. File Search Knob and ENTER Button7. FOLDER/CATEGORY Search Button8. SCAN Selection ButtonUSB MEMORY/AUX/iPod®iPod®is a trademark of Apple Inc.■Type A
Features of your vehicle1404PA960HMU (CDC)1. RANDOM Play Button2. Automatic Track Selection Button3. REPEAT Play Button4. USB/AUX/iPod Selection Button5. INFORMATION Button6. File Search Knob and ENTER Button7. FOLDER/CATEGORY Search Button8. SCAN Selection Button■Type B
4 141Features of your vehicle1. RANDOM Play Button2. Automatic Track Selection Button3. REPEAT Play Button4. USB/AUX/iPod Selection Button5. INFORMATION Button6. File Search Knob and ENTER Button7. FOLDER/CATEGORY Search Button8. SCAN Selection ButtonPA965HMU (CDC_RSE)■Type C
Features of your vehicle1424How to Activate USB MEMORY1. RANDOM Play ButtonPress this button for less than 0.8 secondto activate 'RDM' mode and more than0.8 second to activate 'ALL RDM' mode.• RDM : Only files in a folder are playedback in random sequence. • ALL RDM : All files in a USB memory areplayed back in random sequence.2. Automatic Track Selection Button• Press [TRACK ] to return to thebeginning of the current file. Press again within 1 second to returnthe previous file.• Press and hold [TRACK ] to initiaterewind search.• Press [SEEK ] for less than 0.8 sec-ond to advance the next file.• Press and hold [SEEK ] to initiatefast forward search.3. REPEAT Play ButtonPress this button for less than 0.8 secondto activate 'RPT' mode and more than0.8 second to activate 'FLD RPT' mode.• RPT : Only a file is played repeatedly.• FLD RPT : Only files in a folder areplayed repeatedly.4. USB/AUX Selection Button• If auxiliary device/USB/ is connected, itturns to USB/AUX mode and togglesas below when the button is pressedeach time.AUX/USB : AUX➟USB➟AUX.......• If no auxiliary device and USB is con-nected, it displays "No Media" for 5seconds and returns to the previousmode.5. INFORMATION ButtonDisplays the information of the currentCD TRACK(FILE) as below when thebutton is pressed each time. File Name➟Title➟Artist➟Album➟Folder Name➟Total File...(not dis-played if the file has no song)6. File Search Knob and ENTERButton• Turn this knob clockwise to display Filename after the current song. • Turn this knob counterclockwise to dis-play File Name before the currentsong.• To select the displayed song, press thebutton.7. FOLDER Search Button • Folder name/File name(the first songin the folder) is moved up or down fromcurrently playing folder. • To select the displayed folder, pressENTER(NO.6) button.9. SCAN Play Button Plays back the first 10 seconds of eachsong in the USB memory.
4 143Features of your vehicleHierarchy 1 Hierarchy 2 Hierarchy 3 Hierarchy 4 Hierarchy 5Playlist Playlists Songs - -Artist Artists Albums Songs -Album Albums Songs - -Song Songs - - -Genre Genres Artists Albums SongsComposer Composers Albums Songs -How to Activate iPod Device1. RANDOM Play ButtonPress this button for less than 0.8 secondto activate ' ' mode and more than 0.8second to activate ''mode.•'': All songs in the current categoryare played in random.•'': An album in the iPod is selectedin random and is played in the order ofthe songs in the album.2. Automatic Track Selection Button• Press [TRACK ] to return to thebeginning of the current file.Press again within 1 second to returnthe previous file.• Press and hold [TRACK ] to initiaterewind search.• Press [SEEK ] for less than 0.8 sec-ond to advance to the next file.• Press and hold [SEEK ] to initiatefast forward search.3. REPEAT Play ButtonA single song is played repeatedly.4. iPod Selection Button If iPod is connected, it turns to iPod mode.5. INFORMATION ButtonDisplays the information of the file cur-rently played as below when the button ispressed each time. Title➟Artist➟Album...■Searching for a desired Song/TitleUsing search mode's individual hierar-chy, you can narrow down your searchas shown in the table below.❈ For example : Searching byComposers• Press [FOLDER ] or turn [ENTER]to activate the Menu Select mode.• Turn [ENTER] to select the Compo-sers, and press ENTER.• Turn [ENTER] to select the Albums,and press ENTER.• Turn [ENTER] to select the Song, andpress ENTER. The selected song isplayed.- In the search mode, pressing[FOLDER ] will return to the previ-ous mode.- Other search modes scan be adjustedas above. Although, the hierarchy dif-fers.
Features of your vehicle1444✽NOTICE - Using iPod device• Some iPod models might not supportthe communication protocol and thefiles will not be played.• The order of search or playback ofsongs in the iPod can be differentfrom the order searched in the audiosystem.• If the iPod crashes due to its own trou-ble, reset the iPod. (Reset: Refer toiPod manual)• iPod may not operate normally on lowbattery.❈ iPod to AUDIO Buttons(It is displayed once at the beginning ofiPod mode)(Continued)• When connecting the device withan iPod cable, push in the jackfully so as to not cause interferewith communication.• When adjusting the sound effectsof an iPod and the audio system,the sound effects of both deviceswill overlap and might reduce ordistort the quality of the sound.• Deactivate (turn off) the equalizerfunction of an iPod when adjust-ing the audio system’s volume,and turn off the equalizer of theaudio system when using theequalizer of an iPod.• When the iPod cable is connected,the system can be switched to theAUX mode even without the iPoddevice and can cause noise.Disconnect the iPod cable whenyou are not using the iPod device.• When not using iPod with caraudio, detach the iPod cable fromiPod. If not, the iPod may remain inaccessary mode, and may notwork properly.CAUTION IN USING iPod DEVICE• You need the power cable exclu-sive for an iPod in order to oper-ate an iPod with the buttons onthe audio system. Connectionthrough standard iPod-USB cableis not supported, so do not use itwith car audio. (Continued)MENUFILE DOWN/REW FILE UP/FFTRACKCATENTERROTATEENCODERSEEKROTATION
4 145Features of your vehicle1. DVDP TRACK UP/DOWN Button 2. DVDP TITLE UP/DOWN Button 3. RSE ON/OFF, RSE LOCK/UNLOCKButton4. AUX2/DVD Selection ButtonPA965HMURSE(DVD/AUX2)
Features of your vehicle1464Using the Rear SeatEntertainment (RSE)1. DVD Chapter Selection Button• Press [TRACK ] button to play fromthe beginning of current track.• Press [TRACK ] button again within3 seconds to play the previous track.• Press [SEEK ] button for less than0.8 second to play the next track.2.DVD Title Selection Button• Press [FOLDER ] button to play theprevious track.• Press [CAT ] button to play the nexttrack.3. RSE ON/OFF, LOCK/UNLOCKButtonWhen the RSE ON/OFF, LOCK/UNLOCKbutton is pushed for less than 0.8 sec-ond, the red color LED of the button willlight and RSE unit will be locked. If youpush button for more than 0.8 second,the green color LED of the button willlight and RSE unit will turn on and [RSE]will appear on the LCD.4. DVD/AUX2 Selection ButtonIn the event there is a DVD inserted andan auxiliary device is connected to theRSE system, pressing the DVD/AUX2button will switch between DVD andAUX2 modes.
4 147Features of your vehicle1. SATELLITE RADIO Selection Button2. Channel Selection Button3. Preset Selection Button4. SCAN Selection Button5. Tune Knob and Enter Button 6. CAT/FOLDER Button 7. INFO Selection ButtonSIRIUS SATELLITE RADIOPA910HMU (DCP)■Type A
Features of your vehicle14841. SATELLITE RADIO Selection Button2. Channel Selection Button3. Preset Selection Button4. SCAN Selection Button5. Tune Knob and Enter Button6. CAT/FOLDER Button7. INFO Selection ButtonPA960HMU (CDC)■Type B
4 149Features of your vehicle1. SATELLITE RADIO Selection Button2. Channel Selection Button3. Preset Selection Button4. SCAN Selection Button5. Tune Knob and Enter Button6. CAT/FOLDER Button7. INFO Selection ButtonPA965HMU■Type C
Features of your vehicle1504How to Use SIRIUS SatelliteRadioYour Kia vehicle is equipped with 3months complimentary period of SIRIUSSatellite Radio so you have access toover 130 channels of music, information,and entertainment programming.ActivationIn order to extend or reactivate your sub-scription to SIRIUS Satellite Radio, youwill need to contact SIRIUS CustomerCare at 888-539-7474. Have your 12digit SID (Sirius IdentificationNumber)/ESN (Electronic SerialNumber) ready. To retrieve the SID/ESN,turn on the radio, press the [SAT] button,and tune to channel zero. Please notethat the vehicle will need to be turned on,in Sirius mode, and have an unobstruct-ed view of the sky in order for the radio toreceive the activation signal.1. SATELLITE RADIO SelectionButton(SIRIUS Satellite Radio)Press the [SAT] button to switch to SIR-IUS Satellite Radio. It cycles through thedifferent bands as noted below.SAT1➟SAT2➟SAT3➟SAT1➟...2. Channel Selection Button• Press [TRACK ] or [SEEK ] but-ton for less than 0.8 second to selectprevious or next channel.• Press [TRACK ] or [SEEK ] but-ton for 0.8 second or longer to continu-ously move to previous or next chan-nel.• if "CATEGORY" Icon is displayed atthe top of the screen, channel up/downis done through the channels withincurrent category.3. Preset Selection Button• Press [1]~[6] buttons less than 0.8 sec-ond to play the channel saved in eachbutton.• Press [1]~[6] button for 0.8 second orlonger to save current channel to therespective button with a beep.4. SCAN Selection Button • When the [SCAN] button is pressed, itautomatically scans the radio stationsupwards.• The SCAN feature steps through everychannel, starting from the initial chan-nel, for ten seconds.• Press the [SCAN] button again to stopthe scan feature and to listen to thecurrently selected channel.• if "CATEGORY" Icon is displayed atthe top of the screen, channel chang-ing is done through the channels with-in current category.5. Tune Knob and Enter Button• Rotate clockwise to increase the chan-nel number or to scroll down the cate-gory list.• Rotate counterclockwise to decreasethe channel number or to scroll up thecategory list.• Press this button to make selection ofchannels or items.
4 151Features of your vehicle6. CAT/FOLDER Button• Press [CAT ] or [FOLDER ] but-ton to enter the Category List Mode.The display will indicate the categoryitems, highlight the category that thecurrent channel belongs to.• In the Category List Mode, press thesebuttons to navigate category list.• Press [ENTER] Button to select thelowest channel in highlighted category.• If channel is selected by selecting cat-egory "CATEGORY" Icon is displayedat the top of the screen.7. INFO Selection ButtonDisplays the information of the currentchannel as below when the button ispressed each time.• When default display is CAT/CHCategory/Channel➟Artist/Title➟Composer (if available)➟ Category/Channel ➟...• When default display is ART/TITLEArtist/Title➟Category/Channel➟Composer(if available)➟Artist/Title➟...✽Troubleshooting1. Antenna ErrorIf this message is displayed, the anten-na or antenna cable is broken orunplugged. Please consult with yourKia dealership. 2. Acquiring SignalIf this message is displayed, it meansthat the antenna is covered and thatthe SIRIUS Satellite Radio signal isnot available. Ensure the antenna isuncovered and has a clear view of thesky.
BLUETOOTH PHONE OPERATION ■ General Feature• This system supports Bluetooth, a wire-less system that allows you to make orreceive calls without taking your handsfrom the steering wheel and withoutusing cables to connect the phone andsystem.• The phone must be paired to the systembefore using the hands-free feature.Only one linked cellular phone can beused with the system at a time. TheSystem is available in English, USSpanish, or Canadian French languages.✽NOTICESome Bluetooth devices do not offer aperfect compatibility with this system.■Voice Recognition Activation• The voice recognition engine containedin the Bluetooth System can be activat-ed in the following conditions: - Button ActivationThe voice recognition system will beactive when the button is pressedand after the sound of a Beep.- Active ListeningThe voice recognition system will beactive for a period of time when theVoice Recognition system has askedfor a customer response.• The system can recognize single digitsfrom zero to nine while number greaterthan ten will not be recognized.• If the command is not recognized, thesystem will announce "Pardon" or Noinput voice signal from microphone. (Noresponse)• The system shall cancel voice recogni-tion mode in following cases : Whenpressing the button and sayingcancel following the beep. When notmaking a call and pressing the but-ton. When voice recognition has failed 3consecutive times.Features of your vehicle1524CAUTIONIf the vehicle is moving do not use acellular phone or connect theBluetooth phone.BluetoothVolumeOperationButton
4 153Features of your vehicle• At any time if you say "help", the sys-tem will announce what commands areavailable.■ Menu tree■Phone Setup• Pairing phoneTo use the hands-free system, you needto register your phone in the system. Up to5 phones can be registered in the system.1. Press the button. 2. Say "Set Up".3. Say "Pair Phone".4. Say "Yes".5. Say the name of the contact.6. Say "Yes".7. The Pairing procedure of the cellularphone varies according to each cellu-lar phone.✽NOTICEThe system may not function in the fol-lowing cases: If 5 phones have already been registered. If the system cannot communicate withthe phone.• To connect phoneThe registered phones can be selected.When the system connects to Bluetooth,the phone previously used is automati-cally selected. Select a different phone ifnecessary. Only the selected phone canbe used with the hands-free system.1. Press the button.2. Say "Set Up".3. Say "Select Phone".4. Say the name of the contact or thenumber of the contact.5. Say "Yes".✽NOTICEThe system may not function in the fol-lowing cases: If the phone is not found. If the system does not recognize thevoice command.• Deleting phoneThe registered phones can be deleted.1. Press the button.2. Say "Set Up".3. Say "Delete Phone".4. Say the name of the contact, the num-ber of the contact or "Delete all phone".5. Say "Yes".Pair phoneSelect phoneChange priorityDelete phoneBluetooth offSetupAdd entryPhonebookChangeDelete nameBy PhoneBy voiceCall By nameBy number
Features of your vehicle1544• Changing PriorityThe connection priority for registeredphones can be changed.1. Press the button. 2. Say "Set Up".3. Say "Change Priority".4. Say the name of the contact or thenumber of the contact.5. Say "Yes".•Turning Bluetooth on / offBluetooth function can be switched ON/OFF. initial status : Bluetooth ON1. Press the button. 2. Say "Set Up".3. Say "Bluetooth off".4. Say "Yes".• Turning Bluetooth on1. Press the send or button.2. Say "yes".3. The Bluetooth will be turned on.■ Phone Book• Adding EntryPhone numbers and voice tags can beregistered. Entries registered in the phonecan also be transferred.• Adding Entry by Voice1. Press the button.2. Say "phonebook".3. Say "add entry".4. Say "by voice".5. Say the name of the contact.6. Say "yes".7. Say the phone number.8. Say "store".9. Say "Home", "Office", "Mobile", "Other"or "default".10. Say "Yes" to store an additional loca-tion for this contact.• Adding Entry by phone1. Press the button.2. Say "phonebook".3. Say "add entry".4. Say "by phone".5. Say "yes".6. Transfer procedures may vary depend-ing on the cellular phone.✽NOTICEThe system can recognize single digitsfrom zero to nine. Numbers that are tenor greater are not recognized.To speed up input, it is a good idea togroup all digits into a continuous string. However, you can enter each digit indi-vidually or group digits together in pre-ferred string lengths.The display corresponding to each oper-ation appears on the screen as follows:Input operation1. say: "Nine, nine, five"Display: "995"2. say: "Seven, three, four"Display: "995734"• Changing NameThe registered names can be changed.1. Press the button.2. Say "phonebook".3. Say "Change name".4. Say the name of the phonebook [voicetag].5. Say "yes".6. Say the name of the phonebook to bechanged.
4 155Features of your vehicle• Deleting nameThe registered names can be deleted.1. Press the button.2. Say "phonebook".3. Say "Delete name".4. Say the name of the contact.5. Say "yes".■ Making a phone call• Calling by NameThe system dials the numbers corre-sponding to the spoken names regis-tered in the system.1. Press the button.2. Say "Call".3. Say "name".4. Say "<John>".6. Say "<at home>".7. Say "yes".✽TipA shortcut to each of the following func-tions is available.1. Say "Call name".2. Say "Call <john>".3. Say "Call <john at home>".• Dialing by NumberThe system will make a phone call bydialing the spoken numbers.The system can recognize single digitsfrom zero to nine.1. Press the button.2. Say "Call".3. Say "Number".4. Say "<digit number>".5. Say "<added digit number>".6. Say "Dial".✽TipA shortcut to each of the following func-tions is available.1. Say "Dial number".2. Say "Dial <digit>".
Features of your vehicle1564■ Receiving a phone callWhen receiving a phone call, a ring toneis audible and the system changes intotelephone mode.When receiving a phone call, the phonenumber and the message "Incoming" willbe displayed.• Do either one of the following: Press the send switch to take the call.Press the end switch to refuse the call.• To adjust the ring volume, push "+" or "-" on the steering volume controls.Volume adjustment cannot be madeusing the audio system.• To transfer a call to the phone:The received call can be transferredfrom the hands-free system to the cellu-lar phone that is connected to Bluetooth. For details, please refer to you user'smanual for the cellular phone or go to theKey matrix in this manual (next page).■ Talking on the phoneWhen talking on the phone, the displaywill differ depending on whether or notthe vehicle is in motion.Number and "active call" is displayed.When the call is finished, press the endswitch.✽NOTICEIn the following situations, your voicemay not reach the other party:1. Talk alternately with the other partyon the phone. If you talk at the sametime, the voice may not reach eachother parties. (This is not a malfunc-tion.) (It is not a malfunction.)2. Keep the volume of receiving voice toa low level. Otherwise, high volumesmay result in an echo. When you talkon the phone, speak clearly towardsthe microphone.3. When driving on a rough road.4. When driving at high speeds.5. When the window is open.6. When the air conditioning vents arefacing the microphone.7. When the sound of the air condition-ing fan is loud.
4 157Features of your vehicle■ Key matrixNo.ClassPaired H/PEmpty Disconnected1SHORTLONGSHORTSHORTLONG[10sec]LONG[10sec]Normal modeBT SETUP menuIncoming Call Outgoing Call Active Call 2nd CallNot Paired Not Connecting --Accept CallConnected-2nd call1st Call:waiting2nd Call:active2nd Call2nd Call:waiting1st Call:activeKEY------Transfer call:secret callEnd CallVR MODE CancelVR MODE CancelVR MODE CancelVR MODE Cancel Reject Call End Call End Call-ActiveChangelanguage-ActiveSpeakerAdaptation(Only English)ChangelanguageActiveChangelanguageActive-SpeakerAdaptation(Only English)Changelanguage-----------23
4 158 This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum 20 cm between the radiator and your body. This transmitter must not be collocated or operating in conjunction with any other antenna or transmitter unless authorized to do so by the FCC. IC Warning Operation of this device is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Navigation menu