HYUNDAI MOBIS HM-T032 Remote Keyless Entry User Manual HM T032 RBK 315 FCCIC

HYUNDAI MOBIS CO., LTD. Remote Keyless Entry HM T032 RBK 315 FCCIC

User Manual

FCC ID: TQ8HM-T032/ IC: 5074A-HMT032 HCT CO., LTD. SAN 136-1, AMI-RI, BUBAL-EUP, ICHEON-SI, KYOUNGKI-DO, 467-701, KOREA TEL:+82 31 639 8517 F AX:+82 31 639 8525 www .hct.co.kr Report No. : HCTR1007FR20 1/1 ATTACHMENT E. - User Manual -
1. PRIMARY FUNTION - Remote door lock/unlock/panic- Operating distance : 30 m over- Id input(setting mode)2. ELECTRICAL CHARACTERISTICSOperating frequencyPower 75.6dBuV/m under315㎒ETC FM modulationOperating temperature -20 ~ +60℃Consumption current Max 15mASensitivity - Description of Transmitter Operating voltage 3 VDCTRANSMITTERmodel name HM-T032
3. OPERATING DIAGRAM1) TRANSMITTERA) DATA FRAMEB) DATA FORMAT C) TRANSMISSION SPECIFICATION- BAUD RATE : 1kbps - CODING METHOD : MANCHESTER - TRANSMISSION BIT COUNT : 380Bit- TRANSMISSION TIME : 380ms±15%LOGIC "0" LOGIC "1"
2) BCMHazard RelayTail Gate Unlock RelayDoor Lock Door lock RelayDoor Unlock Door unlock RelayTail Gate UnlockPANICRF ModuleBCMOutput CircuitOutput Circuit CARSerialNumberRollingCodeButtonPressUser CodeSerial NumberSync Codefor RollingRollingCodeDecryptionUser CodeReceived InformationParity Error DetectionCheck ForMatchCheck ForMatchDecryptedRolling CodeEEPROMArray
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifcations to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum 20 cm between the radiator and your body. This transmitter must not be collocated or operating in conjunction with any other antenna or transmitter unless authorized to do so by the FCC. IC Warning Operation of this device is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Navigation menu