HYUNDAI MOBIS AVN-200SLA AVN SYSTEM User Manual 1 of 4
HYUNDAI MOBIS CO., LTD. AVN SYSTEM 1 of 4
UserManual.wiki
>
HYUNDAI MOBIS
>
AVN-200SLA User Manual
>
user manual 1 of 4
Contents
1.
user manual 1 of 4
2.
user manual 2 of 4
3.
user manual 3 of 4
4.
user manual 4 of 4
user manual 1 of 4
Navigation menu
Upload a User Manual
Namespaces
Wiki Guide
HTML
PDF
Info
Views
User Manual
Discussion / Help
Navigation
![1-10 PRE-OVERVIEWPART 1 PRE-OVERVIEWHow to operate menu by voicecommand■Condition for voice recognitionsystemMost of the functions within the AV andNavigation system can be operated byvoice. Please follow the instructions below foroptimal voice recognition performance. ●Close all windows and sunroof. The performance of the voice recognitioncan be improved in quiet environment. ●Press the voice recognition button andsay the desired voice command afterthe sound of the beep. ●The microphone is positioned above thedriver so that voice commands can besaid while maintaining a proper posture. ●Pronounce the voice commandsnaturally and clearly as if in normalconversation. ■Giving voice commandPress the button on the steeringwheel remote controller. A voice command window will bedisplayed on the lower side of the screenfollowed by a "Command please" voicecomment. Once the icon changes into theicon on the pop-up screen with abeep sound, say the desired voicecommand. [Voice command list], page 4-6.[Searching a destination by voicecommand], page 4-20.INFORMATIONPress the shortly to input the desiredvoice command. The system voice instructioncomment will immediately terminate. Whenthe icon changes into the iconwith a beep sound, it is possible to input voicecommands. i](https://usermanual.wiki/HYUNDAI-MOBIS/AVN-200SLA.user-manual-1-of-4/User-Guide-1251155-Page-16.png)
![2-2 AUDIO SYSTEM PART 2 AUDIO SYSTEMOperating the radio FM/AM Radio■Listening to the FM/AM radioPress the button on the controlpanel. The FM/AM radio band of the mostrecent listened station will be displayed. Press the button to change thedesired radio band. Each press willchange the bands in the following order:FM1→FM2 →AM →FM1Select the desired broadcast frequency. [Selecting FM/AM broadcast frequency],page 2-5.Voice Command1. Press the button on the steering wheelremote controller.2. After the beep sound, say a command. " Radio""(Radio) AM""(Radio) FM""FM <1 or 2>""AM Frequency <530 to 1710>""FM Frequency <87.5 to 107.9>""AM Preset <1 to 6>""FM <1 or 2> Preset <1 to 6>"■FM/AM screen and functionsMode display : Displays the FM1/FM2/AM modes.SEEK/SCAN/PRESET SCAN : If SEEK/SCAN/PRESET SCAN is operating, the switch isdisplayed.Frequency : Displays the current playingfrequency.FM/AMFM/AM125634abcdegh123fi78](https://usermanual.wiki/HYUNDAI-MOBIS/AVN-200SLA.user-manual-1-of-4/User-Guide-1251155-Page-22.png)
![AUDIO SYSTEM 2-3Operating the radio STEREO indicator : If the currentfrequency is a stereo broadcast, theindicator is displayed Program Service name: Displays theprogram service name if data is beingbroadcasted.Program Type name: Displays theprogram type name if data is beingbroadcasted.Frequency bar : Displays the position ofthe current frequency within the totalfrequency range.Radio Text: Displays the radio textinformation if data is being broadcasted.button : Changes the desiredradio band. Each press will change thebands in the following order: FM1 →FM2 →FM1TUNE Up/Down buttonSHORT KEY(less than 0.8 second)- The frequency is increased or decreasedby 1-step increments (FM : 0.2MHz, AM :10kHz).LONG KEY(over 0.8 second)- The frequency is rapidly increased ordecreased by 1-step increments (FM :0.2MHz, AM : 10kHz) and stops operationupon KEY RELEASE. SEEK Up/Down button SHORT KEY(less than 0.8 second)- Automatically searches for the previousor next broadcast frequency and startsplaying.LONG KEY(over 0.8 second)- Quickly moves through the frequencieswhile the button is pressed. Oncereleased, it automatically searches forbroadcasts which can be received.Preset buttons : The desired frequencycan be preset and selected. [Storing FM/AM presets], page 2-5.button : Turns the Radio Textinformation on and off.INFORMATIONIf the is on OFF state, text will not bedisplayed even if there is text beingtransmitted from the broadcast station. If the is on ON state, the frequencybar will not be displayed. Even if the is on ON state, text may not be displayed iftext is not being received from the broadcaststation.button : Scans all frequencies orjust the preset frequencies for 5 secondseach. [Scanning FM/AM broadcast frequency],page 2-5.button : Adjusts the FAD/BAL,BASS/MID/TREB controls.[Audio sound setting], page 1-11.SoundScanR.TextR.TextR.TextR.TextBAND4568ab cid efgh7i](https://usermanual.wiki/HYUNDAI-MOBIS/AVN-200SLA.user-manual-1-of-4/User-Guide-1251155-Page-23.png)
![2-4 AUDIO SYSTEM PART 2 AUDIO SYSTEM■Selecting FM/AM broadcastfrequencyThere are 3 ways to select the broadcastfrequency - (a) selecting through presets,(b) selecting through SEEK, (c) selectingthrough manual search.(a) Selecting a frequency through presetsPress the preset button of the desiredbroadcast frequency.INFORMATION●Press the or buttons for ashort time on the steering wheel remotecontroller. The preset frequencies of the current bandwill be selected in order.●There are 6 different preset frequencieseach for FM1, FM2, and AM modes.[Storing FM/AM preset], page 2-5.Voice Command1. Press the button on the steering wheelremote controller.2. After the beep sound, say a command."Preset <1 to 6>""Preset Up""Preset Down"(b) Selecting a Broadcast frequencythrough SEEKPress the or buttons onthe control panel or the or buttons on FM1, FM2, and AM modescreens for less than 0.8 second. Once theSEEK function is operating (SEEK indicatorblinking), the next or previous broadcastfrequency with superior reception will besearched automatically.INFORMATION●Press the or buttons onthe control panel or the or buttons on the steering wheel remotecontroller or the or buttons onFM1, FM2, and AM mode screens for morethan 0.8 second to quickly move to thenearest desired frequency. Once the buttonis released, the next frequency with superiorreception will be searched automatically.●While the SEEK function is operating, pressingthe or buttons on thecontrol panel again will terminate SEEKoperation and select the current frequency.Voice Command1. Press the button on the steering wheelremote controller.2. After the beep sound, say a command. "Seek Up""Seek Down"(c) Selecting a broadcast frequency throughmanual searchPress the or buttons or turn theknob on the control panel inclockwise or counter-clockwise direction. Each click on the tune knob or the orbuttons will increase or decrease thefrequency by 1 step (FM: 0.2 MHz, AM: 10kHz).TUNETRACK ∨SEEK ∧SEEK ∨SEEK ∧TRACK ∨SEEK ∧TRACK ∨SEEK ∧SEEK ∨SEEK ∧ii](https://usermanual.wiki/HYUNDAI-MOBIS/AVN-200SLA.user-manual-1-of-4/User-Guide-1251155-Page-24.png)
![AUDIO SYSTEM 2-5Operating the radio ■Storing FM/AM presetsSelect the desired frequency. [Selecting FM/AM broadcast frequency],page 2-4.Press the preset button to store for over0.8 second. The frequency will becomestored along with a beep sound. INFORMATIONSix preset frequencies each for FM1/FM2/AMmodes can be stored using the aboveinstructions.■Scanning FM/AM broadcastfrequencyPress the button. ●SCAN (less than 0.8 second) : Scans allfrequencies and plays only frequencieswith superior reception for 5 seconds each. Voice Command1. Press the button on the steering wheelremote controller.2. After the beep sound, say a command."Scan"●PRESET SCAN (over 0.8 second): Scans the6 frequencies stored as preset frequenciesin the current band for 5 seconds each.Voice Command1. Press the button on the steering wheelremote controller.2. After the beep sound, say a command."Preset Scan"Press the button again tocontinue listening to a frequency. The scan will be terminated and thecurrent frequency will continue to beplayed.INFORMATIONWhen scanning has completed an entirerevolution, the scan function will be terminatedautomatically and the previous playedfrequency will be restored.ScanScanii](https://usermanual.wiki/HYUNDAI-MOBIS/AVN-200SLA.user-manual-1-of-4/User-Guide-1251155-Page-25.png)
![2-6 AUDIO SYSTEM PART 2 AUDIO SYSTEM11234abcdSIRIUS radio■Listening to the SIRIUS radioPress the button on the controlpanel. The Sirius radio band screen of themost recent listened station will bedisplayed.Press the button to change thedesired radio band. Each press willchange the bands in the following order:SIRIUS1→SIRIUS2 →SIRIUS3 →SIRIUS1Select the desired broadcast channel. [Selecting SIRIUS broadcast channel],page 2-7.Voice Command1. Press the button on the steering wheelremote controller.2. After the beep sound, say a command. "SIRIUS""SIRIUS <1 or 2 or 3>""SIRIUS Channel <0 to 223>""SIRIUS <1 or 2 or 3> Preset <1 to 6>"■SIRIUS screen and functionsMode display: Displays the SIRIUS1/SIRIUS2/SIRIUS 3 modes.Channel number: Displays the currentplaying channel.SCAN/PRESET SCAN indicator: If SCAN/PRESET SCAN is operating, the switch isdisplayed.Category name: Displays the categoryname.Channel name: Displays the channelname.Song/Program title: Display the song orprogram title.Artist name: Displays the artist or otherrelated information.SATSATf56723hgi j ke4567](https://usermanual.wiki/HYUNDAI-MOBIS/AVN-200SLA.user-manual-1-of-4/User-Guide-1251155-Page-26.png)
![AUDIO SYSTEM 2-7Operating the radio iINFORMATIONThe Song title display may be delayed inaccordance to the reception quality of theSirius broadcast. button : Switches betweenchannel mode and category mode. [Switching the SIRIUS modes], page 2-7., : Moves to the next orprevious category, and automaticallyplays the first channel within theselected category., : Moves to the next or previouschannel. buttons : The desired channelcan be preset and selected. [Storing SIRIUS presets], page 2-9.button : Displays the Title,Artist, Composer, and other informationfor the current received channel if theinformation exists.button: Selects the channel bydirectly inputting the channel number. [Selecting SIRIUS broadcast channel],page 2-7.button: Displays the channel orcategory list.[Selecting SIRIUS broadcast channel],page 2-7.button: Scans all frequencies orjust the preset frequencies for 5 secondseach. [Scanning SIRIUS broadcast channel],page 2-10.button : Adjusts the FAD/BAL,BASS/MID/TREB controls.[Audio sound setting], page 1-11.■Switching the SIRIUS modes(Channel / Category)Each time the button is pressed,the mode will switch between channelmode and category mode. Category mode will begin operating whenthe orange light is turned ON. ■Selecting SIRIUS broadcast channelThere are 5 ways to select a broadcastchannel - (a) selecting through presets, (b)selecting with channel Up/Down, (c)Selecting a channel through manual search,(d) selecting through channel/category list,(e) selecting by directly inputting thechannel number.(a) Selecting a channel through presets Press the preset button of the desiredchannel.INFORMATION●Press the or buttons onthe steering wheel remote controller for lessthan 0.8 second. The preset channels of the current band willbe selected in order.●There are 6 preset channels each forSIRIUS1, SIRIUS2, and SIRIUS3. [Storing SIRIUS presets], page 2-9.SEEK ∨SEEK ∧CATSoundScanListSearchInfo.Preset CATab cdfgheijik](https://usermanual.wiki/HYUNDAI-MOBIS/AVN-200SLA.user-manual-1-of-4/User-Guide-1251155-Page-27.png)
![AUDIO SYSTEM 2-9Operating the radio Select the desired channel button. The previous screen will be restored andthe selected channel will begin playing.(e) Selecting channel by directly inputtingthe channel number Press the button. The Channel search screen will bedisplayed.Input desired channel number, and pressthe button. The previous screen will be restored andthe selected channel will begin playing.INFORMATIONTo prevent inputting a channel which exceedsthe channel range, numbers which cannot beinputted are set to disabled state. Voice Command1. Press the button on the steering wheelremote controller.2. After the beep sound, say a command. "Channel<0 to 223>"■Storing SIRIUS presetsSelect the desired channel. [Selecting SIRIUS broadcast channel],page 2-7.Press the preset button for over 0.8second. The frequency will be saved along withbeep sound. INFORMATIONSix preset frequencies each for SIRIUS1/SIRIUS2/ SIRIUS3 modes can be stored usingthe above instructions.DoneSearchii](https://usermanual.wiki/HYUNDAI-MOBIS/AVN-200SLA.user-manual-1-of-4/User-Guide-1251155-Page-29.png)
![AUDIO SYSTEM 2-15Operating the CDPCD■Listening to CD musicInsert the CD or press the button on the control panel if the CD isalready inserted.Select the desired track. [Selecting the CD track], page 2-16.Voice Command1. Press the button on the steering wheelremote controller.2. After the beep sound, say a command."DISC""CD""CD Track <1 to 665>"■CD screen and functionsMode display : Displays that the currentmode is CD mode.RANDOM/REPEAT/SCAN indicator : IfRANDOM/REPEAT/SCAN is operating,the switch is displayed.Play time : Displays the play time. Track number : Displays the currentplaying track number.button : Plays or pauses thecurrent track.button : REW or FF[Selecting the CD track], page 2-17.button : Previous or nexttrack.[REW/FF CD track], page 2-17.button : Plays the tracks on thedisc in random order.[Setting Random function for CDmusic] , page 2-17.button : Repeats the currentplaying track.[Setting Repeat function for CDmusic], page 2-18.button : Scans all tracks on thedisc for 10 seconds each. [Scanning CD track], page 2-18.button : Adjusts the FAD/BAL,BASS/MID/TREB controls.[Audio sound setting], page 1-11.SoundScanRepeatRandomMEDIA11234ab cdacbd e fghfghe234ii](https://usermanual.wiki/HYUNDAI-MOBIS/AVN-200SLA.user-manual-1-of-4/User-Guide-1251155-Page-35.png)
![AUDIO SYSTEM 2-19Operating the CDP■Listening to MP3 musicInsert the MP3 disc or press the button on the control panel if the MP3disc is already inserted.Select the desired file. [Selecting the MP3 file], page 2-21.Voice Command1. Press the button on the steering wheelremote controller.2. After the beep sound, say a command. "DISC""CD""MP3"■MP3 screen and functionsMode display: Displays that the currentmode is MP3 disc mode. (MP3 files onDVDs are not supported.)REPEAT/RANDOM/SCAN indicator: IfREPEAT/RANDOM/SCAN is operating,the switch is displayed.Play file position : Current playing file /total files Play time: Displays the play time.Folder name: Displays the folder name.File name: Displays the file name.button: Plays or pauses thecurrent file. button : REW or FF.[REW/FF MP3 file], page 2-22.button : Previous or nexttrack.[Selecting the MP3 file], page 2-21.button : Plays all files on thedisc or folder in random order. [Setting Random function for MP3file] , page 2-22.button : Repeats the currentplaying folder or file.[Setting Repeat function for MP3 file],page 2-23.button : Scans all files on thedisc or folder for 10 seconds each.[Scanning MP3 file], page 2-23.button : Displays the MP3folders and file lists for the disc. [Selecting the MP3 file], page 2-21.button : Displays or hides thedetailed file information for the currentplaying file.[Browsing detailed information aboutthe MP3 file], page 2-22.Info.ListScanRepeatRandomMEDIA11426532345aacbd e fi jhgb cd efghijk](https://usermanual.wiki/HYUNDAI-MOBIS/AVN-200SLA.user-manual-1-of-4/User-Guide-1251155-Page-39.png)
![2-20 AUDIO SYSTEM PART 2 AUDIO SYSTEMbutton : Adjusts the FAD/BAL,BASS/MID/TREB controls.[Audio sound setting], page 1-11.■Selecting the MP3 fileThere are 3 ways to select an MP3 file - (a)selecting through file up/down, (b)selecting through searching files, (c)selecting through MP3 list.(a) Selecting through File Up / DownPress the or buttons onthe control panel or the orbuttons on the steering wheelremote controller or the or buttons on the screen for less than 0.8second. The next or previous file will begin playing.INFORMATIONIf the button on the control panelor the button on the steering wheelremote controller the button on thescreen is pressed shortly while the file hasplayed for more than 3 seconds, the start ofthe current file will begin playing. If the file has been playing for less than 2seconds, the start of the previous file willbegin playing.Voice Command1. Press the button on the steering wheelremote controller.2. After the beep sound, say a command. "Next File""Previous File""Next Folder""Previous Folder"(b) Selecting through search Turn the knob on the controlpanel in clockwise or counter-clockwisedirection. Each click on the knob will displaythe information of the next or previousfile. The current playing file will continueto be played. INFORMATIONIf the operation of the knob is toorapid, there may be a delay in displaying thefile information.Press the knob at the desired file.The searched file will begin playing.(c) Selecting through MP3 List Press the button. The file list of the folder for the currentplaying file will be displayed. INFORMATION●If many songs and folders are recorded ontoa DISC, file loading time may be longer andcause the play list to be improperly displayedor song search through TUNE operation tooperate improperly. In such cases, wait until file loading iscomplete and try again.●Within the MP3 list screen, if the button is pressed while searching for fileswithin a folder or a page, the current playingfile list will become displayed.Now playingListTUNETUNETUNETUNESEEK ∨TRACK ∨SEEK ∨SEEK ∧TRACK ∨SEEK ∧Soundiiik](https://usermanual.wiki/HYUNDAI-MOBIS/AVN-200SLA.user-manual-1-of-4/User-Guide-1251155-Page-40.png)
![AUDIO SYSTEM 2-23Operating the external devicesOperating the external devices iPodiPodis a registered trademark of AppleInc.■Connecting iPod devicesConnect the iPod device as shown in thepicture. The identification of the iPod device, batteryrecharge, and other functions provided bythe iPod device can be normally supportedonly by using a separated sold iPodconnector cable. If the USB cable provided upon purchasingthe iPod for charging is used as the connectorcable, the device will be recognized as a USBand may not properly operate or display all ofthe display information. ●Supported iPod devices : iPod 3G, iPod 5G,5.5G, iPod Mini, iPod Nano 1G, 2G.If iPod mode cannot be entered due toidentification error, no track, incompatibleprotocol version, or other reasons, a pop-upmessage "No Media Connected" will bedisplayed for 5 seconds and returnautomatically to the previous mode. If the message continues even afterreconnecting the iPod, check to see if thereare any problems with the iPod device.CAUTIONIf a playing iPod is connected to the audiosystem, a high-pitched tone may occur forapproximately 1-2 seconds. Please turn the iPod device to pause/stopprior to connecting it to the vehicle. ■Listening to music from iPodConnect the iPod or press the button on the control panel if the iPod isalready connected.INFORMATIONEven if the iPod is connected, the 'No MediaConnected' message may be displayed if anerror has occurred. In such a case, reconnectthe iPod. Select the desired song. [Selecting music from iPod], page 2-26.MEDIAi](https://usermanual.wiki/HYUNDAI-MOBIS/AVN-200SLA.user-manual-1-of-4/User-Guide-1251155-Page-43.png)
![2-24 AUDIO SYSTEM PART 2 AUDIO SYSTEMiINFORMATIONAn iPod cable assembly can be purchased atyour local KIA dealer.Voice Command1. Press the button on the steering wheelremote controller.2. After the beep sound, say a command. "iPod"■iPod screen and functionsMode display: Displays that the currentmode is iPod mode.RANDOM/REPEAT indicator: If RANDOM/REPEAT is operating, the switch isdisplayed.Play file position: Current playing file /total files Play time: Displays the play time.Category name: Displays the categoryname of the playing file.Title name: Displays the title name ofthe playing file.button : Plays or pauses thecurrent file.button : REW or FF.[REW/FF iPod music], page2-27.button : Previous or nexttrack.[Selcting music from iPod], page 2-26.button : Plays all music in thecurrent playing list in random order orrandomly in album unit.[Setting Random function for iPodmusic], page 2-27.button: Repeats the currentplaying music. [Setting Repeat function for iPodmusic], page 2-28.button : Converts to thecategory menu screen. [Selecting music from iPod], page 2-26.button : Displays or hides thedetailed file information for the currentplaying file.[Browsing detailed information aboutthe iPod music], page 2-28.button : Adjusts the FAD/BAL,BASS/MID/TREB controls.[Audio sound setting], page 1-10.SoundInfo.MenuRepeatRandom112345623456abacbd e f gh icd efghijj](https://usermanual.wiki/HYUNDAI-MOBIS/AVN-200SLA.user-manual-1-of-4/User-Guide-1251155-Page-44.png)
![2-30 AUDIO SYSTEM PART 2 AUDIO SYSTEM●The device may not support normaloperation if MP3 Players, cellular phones,digital cameras, or other electronicdevices (USB devices not recognized asportable disk drives) are connected to thedevice. ●The device may not support normaloperation when using a USB memorytype besides the Metal Cover Type USBMemory. ●The device may not support normaloperation when using formats such asHDD Type, CF, or SD Memory. ●The device will not support files locked byDRM (Digital Rights Management).●The device may not support. Please makesure to use normal operation if the properconnection with the USB memory failsdue to vibrations caused by the vehicle. (i-stick type, etc.)●Please avoid using USB memory productswhich can be used as key chains orcellular phone accessories as they couldcause damage to the USB jack. Please make certain only to use plug typeconnector products as shown below. ■Connecting the USB devicesConnect the USB as shown in the picture. ■Listening to USB musicConnect a USB or press the button on the control panel if the USB isalready connected.Select the desired file. [Selecting the MP3 file], page 2-21.INFORMATIONThe USB screen and operation method is thesame with MP3 mode. Please refer to the MP3 mode section formore information. MEDIAiPlug Type Connector](https://usermanual.wiki/HYUNDAI-MOBIS/AVN-200SLA.user-manual-1-of-4/User-Guide-1251155-Page-50.png)