HYUNDAI MOBIS AN340EPAN CAR AVN User Manual 1
HYUNDAI MOBIS CO., LTD. CAR AVN 1
UserManual.wiki
>
HYUNDAI MOBIS
>
AN340EPAN User Manual
Users Manual
Navigation menu
Upload a User Manual
Namespaces
Wiki Guide
HTML
PDF
Info
Views
User Manual
Discussion / Help
Navigation
![Head Unit1. CD-IN LED DISC LED2. DISC IN/OUT DISC insert/eject key 3. DISC Insert Slot DISC insert/eject slot 4. DISP Displays current date and time 5. Power/Volume knob• Used to turn device power ON/OFF and control volume • When power is off, press to turn power on • When power is on, press and hold (over 0.8 seconds) to turn power off • When power is on, press shortly (under 0.8 seconds) to turn AV off• Turn left/right to adjust volume 6, 7. SEEK/ TRACKWhen the [ SEEK] [TRACK ] keys are pressed shortly (under 0.8 seconds) • In FM/AM mode, searches broadcast frequencies saved to presets• In DVDP CD/MP3/DVD and USB/iPod modes, changes the track, file or chapterWhen the [ SEEK] [TRACK ] keys are pressed and held (over 0.8 seconds) • In FM/AM mode, automatically searches broadcast frequencies and channels• In DVDP CD/MP3/DVD and USB/iPod modes, rewinds or fast forwards the track or file8. FM/AM • Operates FM/AM mode • Each time the key is pressed, mode is changed in order of FM1→FM2→AM9. SAT • Operates XM mode 10. MEDIA • Operates CD, MP3, DVD, VCD, USB, iPod, AU, Bluetooth Streaming Audio modes• If the media is not connected or a disc is not inserted, corresponding modes will be disabled11. TUNE/FILE knob• In FM/AM mode, turn to change broadcast frequencies• In CD, MP3, USB, and iPod modes, turn to search tracks/channels/files. When the desired channel or filename is displayed, press to operate the corresponding track/channel/fileComponent Names and FunctionsPart 1. BasicSAT](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-7.png)
![Part 2. AV (FM/AM)Using the ModePress the [HOME] key Select the desired FM or AM modePress the [FM/AM] key on the head unit to change the mode in order of FM1-> FM2-> AM.Information•Pressing the [FM/AM] key while the power is off will automatically turn the device on and start radio mode.Using AutostorePush the [ ] in ↓ direction to enter Preset mode.-When turning the controller in Ω direction: receives previous/next preset stationWhen pushed in ← or →directions: : Changes the frequency while pressed and receives the next frequency upon release.-If the [SEEK/TRACK] keys are shortly pressed (under 0.8 seconds): Plays previous/next frequency-If the [SEEK/TRACK] keys are pressed and held (over 0.8 seconds): changes the frequency while pressed and receives the next frequency upon release.Using TUNEPush the [ ] in ↑ direction to enter Tune mode. Push the [ ] or turn the [TUNE/FILE] knob in Ω direction to select the desired frequency.• FM1 / FM2: Increases/decreased by100kHz• AM: Increases/decreased by 9kHz Saving Radio FrequenciesSaving Automatically (Autostore)Press the [Soft1] and select the Autostore feature to automatically save receivable frequencies with superior reception to preset buttons • A total of 36 frequencies with 12 presetfrequencies each for FM1/FM2/AM modes can be saved.InformationWhile Autostore is operating, pressing the [ ] will cancel the function and return to the previous frequency.](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-11.png)
![Selecting Stations ManuallyTurn the [ ] in Ω direction and select the desired frequency Press and hold the [ ] Select position to save presetAfter selecting the desired preset, press and hold (over 0.8 seconds) the [ ]. A ‘beep’ will sound and the frequency is saved to the selected preset button. InformationStations can also be saved manually by pressing the [MENU] key Pressing [Save Preset].Scanning Radio FrequenciesPress the [MENU] key Press [Scan]Starting from the current frequency,frequencies with superior reception arescanned for 5 seconds and the previousfrequency is restored.InformationWhile Scan is operating, pressing the [ ] will cancel the function and return to the previous frequency.Part 2. AV (FM/AM)](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-12.png)
![Using the ModePress the [HOME] key Select the XM modePress the [SAT] key on the head unit to change the mode in order of XM1-> XM2Information•Pressing the [XM] key while the power is off will automatically turn the device on and start radio mode.Push the [ ] in ↓ direction to enter Preset mode.-If the [SEEK/TRACK] keys are shortly pressed (under 0.8 seconds): Plays previous/next channel.-If the [SEEK/TRACK] keys are pressed and held (over 0.8 seconds): changes the channel while pressed and receives the next frequency upon release.-When turning the controller in Ω direction: receives previous/next preset channelWhen pushed in ← or →directions:Changes the channel while pressed and receives the next channel upon release.Push the [ ] in ↑ direction to enter channel mode. Push the [ ] in ↑ direction or turn the [TUNE/FILE] knob in Ω direction to select the desired channel.Preset ModeChannel ModePress the [Soft1] key on the main screen or [Channel List] from the MENU.-Once you select a category shown on the left column, lists of channels included within the selected category are displayed on the right column.- Select the desired channel from the right column. Channel ListSATPart 2. AV (XM)](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-14.png)
![From the presets, select the desired channel.from the MENU, press [Search Channel].. - Turn the controller to enter the desired channel number.- Press the [Soft2] or the [Back] key to return to the main screen.InformationPressing the controller during Scan will stop the scanning feature.Search Channelfrom the MENU, press scan.Channel Mode: Receives channels with good reception for 5 seconds each.Preset Mode : Receives channels saved as presets for 5 seconds each.ScanPresetsPress the [Soft2] key on the main screen or [Presets] from the MENU.Part 2. AV (XM)](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-15.png)
![Press [Category Lock] from the MENU.Once Category Lock is turned on, the Category Lock icon is displayed on the main screen. Upon operating seek with the Lock on, only channels within the category are searched.Press [CCP] or [Save Channel] from the MENU.From the Preset list, select the position where you want to save.- Upon saving a channel, the Preset list screen is displayed. Select the channel you want to delete from the Preset list. - Delete a previously saved channel to save the current channel.Save ChannelCategory LockInformationThe Category Lock feature is turned off upon conducting the following operations. - Selecting Category Lock from the Menu- Selecting a Preset channel - Manually changing channels - Operating Scan-Changing XM1,2-Changing the AV modePart 2. AV (XM)](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-16.png)
![Using the ModePress the [HOME] key Select the Pandora mode-If the [SEEK/TRACK X] keys are shortly pressed (under 0.8 seconds): Skip the now playing song-When turning the controller in Ω direction: Searches stations, press to listen to selected station.When pushed in →directions: Skip the now playing songMain ControllerPress the [Soft1] key.• You can thumb down the currently playing song to play the next song.Thumb DownPart 2. AV (Pandora)Information-In order to operate Pandora Radio, the system must be connected to the related device through Bluetooth and Pandora Radio must be operating within the connected device. - Features available within Pandora Radio Mode may differ depending on the Pandora Radio specification within the connected device.](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-18.png)
![Press [Why this track is playing] from the MENU.This option is used to display information about the currently playing song. Press [Station] from the MENU.- Use the controller to select the desired station. - Use the [Soft1] key to sort station lists by date or name. StationPress the [Soft2] key.• Thumb up the currently playing song. Thumb Up Why this track is playingPart 2. AV (Pandora)](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-19.png)
![Press [Bookmark this track] from the MENU.• This option is used to bookmark the current track. Bookmark this trackPress [Bookmark this Artist] from the MENU.Bookmark this Artist• This option is used to bookmark the artist of the current song.Part 2. AV (Pandora)](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-20.png)
![Part 2. AV (CD)Starting ModePress the [HOME] Key Select [Disc] MenuCD mode will automatically start once aCD is insertedNOTICE•Only genuine audio CDs are supported. Other discs may result in recognition failure (e.g. copy CD-R, CDs with labelsCD will automatically play once a CD is inserted, press the [ ] button to pause the track.Playing a CDSelecting a TrackWhile playing Shortly push the [ ] in ← or → direction (under 0.8 seconds) or shortly press the [SEEK]TRACK] key to select the previous/next track.Fast-forwarding or Rewinding CD TracksWhile playing Push and hold the [ ] in ← or → direction (under 0.8 seconds) or press and hold the [SEEK]TRACK] key to fast-forward/rewind the track.While the [ ] or [SEEK] [TRACK] key is being operated, the track will rewind or fast-forward at 20x speed. Once released, the track will begin playing at normal speed.](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-28.png)
![Searching CD TracksTurn the [ ] or [TUNE/FILE] knob to search tracksFrom the searched tracks, once the desired track name is displayed, press the [ ] or [TUNE/FILE] knob to play the corresponding track.Information•When searching, the track info is displayed in blue. •Pressing the [ ] or [TUNE/FILE] knob will play the selected track and display the basic display specification.Press the [Menu] button to set theShuffle, Repeat, Scan, Auto Playlist options as well as Sound Settings and Display Settings.Using the Menu ButtonstShufflePress the [MENU] key Select [Shuffle] Set Shuffle All to On.RepeatPress the [MENU] key Select [Repeat] Set Repeat to On.The current track is repeated.InformationSelect the [Off] button to turn off repeat.InformationSelect the [Off] to turn the shuffle option off.Songs within the current playlist are playedin random order.Part 2. AV (CD)](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-29.png)
![The beginning (approx 10 seconds) of all tracks within the CD are scanned.ScanPress the [MENU] key Press [Auto Playlist]Auto PlaylistPress the [MENU] key Press [Scan] Press [Scan All]Information•Press the [Off] button again to turn the scan option off.Track Info/Play InformationPress the [LHT] to select Track Info to view track information, such as title, album, artist, genre, and track number. List of songs within the CD similar with the current song is displayed.Information•For more information on Sound and Display settings, refer to the Info/Setup section.Press [Play Info] to restore the previousdisplayEjecting DiscPress the [ ] key to eject the disc.Information•Artist/album info are supported within Text CDs.Part 2. AV (CD)](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-30.png)
![Starting ModeMP3 mode automatically starts when anMP3 disc is inserted.Press the [HOME] Key Select [Disc] MenuInformation• If there are numerous songs and folders within the disc, reading time could take more than 10 seconds and the list may not be displayed or song searches may not operate. Once loading is complete, try again.• Only genuine audio CDs are supported. Other discs may result in recognition failure (e.g. copy CD-R, CDs with labels)While playing Push and hold the [ ] in ← or → direction (under 0.8 seconds) or press and hold the [SEEK]TRACK] key to fast-forward/rewind the file.Playing DISC MP3Selecting DISC MP3 filesWhile playing Shortly push the [ ] in ← or → direction (under 0.8 seconds) or shortly press the [SEEK]TRACK] key to select the previous/next file.Once a CD is inserted, the DISC MP3 will automatically being playing. Pressing the [ ]again will pause the current song.Fast-forwarding or Rewinding DISC mp3 TracksPart 2. AV (DISC MP3)](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-32.png)
![Turn the [ ] or [TUNE/FILE] knob in Ω directions to search for files.During search, the file name is displayed in blue. Press the [ ] or [TUNE/FILE] knob to play the selected file and display the basic display info. Press the [MENU] key to use the Shuffle, Repeat, Scan, Sound Settings and Display Settings.Searching DISC MP3Using the Menu ButtonsWhile the [ ] or [SEEK] [TRACK] key is being operated, the file will rewind or fast-forward at 20x speed. Once released, the track will begin playing at normal speed. Press the [Soft2] to select the list and check the playlist.Searching DISC MP3 ListTurn the [ ] in Ω direction to select and play the desired file.From the searched files, once the desired file name is displayed, press the [ ] or [TUNE/FILE] knob to play the corresponding file.Part 2. AV (DISC MP3)](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-33.png)
![Name Description1. Shuffle Folder Plays current folder in random order2. Shuffle All Plays all files in random order121212Name Description1. Repeat Song Repeat current song2. Repeat Folder Repeat current folderName Description1. Scan AllScans the beginning parts (approx 10 seconds) of all files2. Folder ScanScans the beginning parts (approx 10 seconds) of all files within the current folderInformation•Press [Off] to turn the Shuffle feature off. Information•Press [Off] to turn the Repeat feature off. Information•Press [Off] to turn the Scan feature off.Press the [MENU] key Select [Repeat] Press [Repeat Song] or [Repeat Folder]Press the [MENU] key Press [Scan] [Scan All] or [Folder Scan] Press the [MENU] key select [Shuffle] Select [Shuffle Folder] or [Shuffle All]The current song or the all files within the folder can be repeated.The beginning part (approximately first 10 seconds) of all files within the current folder or the entire DISC MP3 are scanned.All songs or songs within the current folder can be played in random order.Repeat ScanShufflePart 2. AV (DISC MP3)](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-34.png)
![File Info/Play InfoPress the [Soft1] to select File Info to display file information, such as the title, album, artist, genre, file name, and folder location.To return to the previous screen, press the [Soft1] to select Play Info.Information• No information are shown for MP3 files without file information.• For more information on Sound and Display settings, refer to the Info/Setup section.Part 2. AV (DISC MP3)](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-35.png)
![Starting ModeWhile playing Push and hold the [ ] in ← or → direction (under 0.8 seconds) or press and hold the [SEEK]TRACK] key to fast-forward/rewind the current DVD.Once a DVD is inserted, the DVD will automatically begin playing. Pressing the [ ] again will pause the DVD.Playing a DVD Searching ChapterSelecting a ChapterWhile playing Shortly push the [ ] in ← or → direction (under 0.8 seconds) or shortly press the [SEEK]TRACK] key to select the previous/next chapter.While the [ ] or [SEEK] [TRACK] key is being operated, the DVD will rewind or fast-forward at 20x speed. Once released, the DVD will begin playing at normal speed.The mode will be disabled when a DVD disc has not been inserted.Information•Only genuine DVDs are supported. Other discs may result in recognition failure (e.g. copy DVD-R, DVDs with labels)Press the [HOME] Key Select [Disc] MenuPart 2. AV (DVD)](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-37.png)
![12Searching TitlesSearching Titles/ChaptersPress the [List] button to search DVD titles and chapters.Press the [Soft1] and [Soft2] to change to the previous or next title. Searching ChaptersTurn the [ ] in Ω direction or shortly press the [SEEK]TRACK] key (under 0.8 seconds) to select the previous/next chapter. Press the [MENU] key to use the Title Menu, DVD Menu, Subtitle Language, Voice Language, Sound Settings, Display Settings and DVD Default Language.Using the Menu ButtonsInformation• The 1 displays the total number of titles within the current DVD disc.• The 2 displays the total number of chapters within the title.• The title/chapter search feature can only be used while the DVD is playing. The feature will not operate during the initial DVD screen or when menus are being displayed.Information•The DVD Menu and DVD Title options can only be used within DVDs that support these features. For DVD Menus, different DVD titles may have different menu organizations.Part 2. AV (DVD)](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-38.png)
![Push the [ ] in up/down/left/right directions to select the desired menu and press the [OK] button.Title/DVD MenuPress the [MENU] key Select [Title Menu] or [DVD Menu]Select the desired language and press the [ ] to change the subtitle language.Subtitle LanguagePress the [MENU] key Select [Subtitle Language]Voice LanguagePress the [MENU] key Select [Voice Language]Select the desired language and press the [ ] to change the voice language.Information•This is supported only for DVD titles that support this feature.Information•Supported languages may differ according to DVD title.Information•Supported languages may differ according to DVD title.Part 2. AV (DVD)](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-39.png)
![Part 2. AV (DVD)Viewing in Full ScreenPress the [Soft1] and select [Full Screen]to view the DVD in full screen.DVD Default LanguagePress the [MENU] key Select [DVD Default Language]Information•If there are no operations for 10 seconds, the DVD menu will automatically disappear. •Press the [MENU] key or [ ] to display the menu again.](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-40.png)
![Starting ModePress the [HOME] Key Select [Disc] MenuThe mode will be disabled when a VCD disc has not been inserted.While playing Push and hold the [ ] in ← or → direction (under 0.8 seconds) or press and hold the [SEEK]TRACK] key to fast-forward/rewind the current VCD.Once a VCD is inserted, the VCD will automatically begin playing. Pressing the [ ] again will pause the VCD.Playing a VCDFast-forwarding or Rewinding VCD tracksSelecting VCD tracksWhile playing Shortly push the [ ] in ← or → direction (under 0.8 seconds) or shortly press the [SEEK]TRACK] key to select the previous/next track.While the [ ] or [SEEK] [TRACK] key is being operated, the VCD will rewind or fast-forward at 20x speed. Once released, the VCD will begin playing at normal speed.Information•Only genuine VCDs are supported. Other discs may result in recognition failure . (e.g. Copied CD-R, CDs with labels)Part 2. AV (VCD)](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-42.png)
![Turn the [ ] or [TUNE/FILE] knob in Ω directions to search for tracks. From the searched tracks, once the desired file name is displayed, press the [ ] or [TUNE/FILE] knob to play the corresponding track.During search, the track name is displayed in blue. Press the [ ] or [TUNE/FILE] knob to play the selected track and display the basic display info. Press the [MENU] key to use the View PBC, PBC Menu, Repeat, Sound Settings and Display Settings.Searching VCD tracks Using the Menu ButtonsPBCPress the [MENU] key Press [View PBC] Press the [0]~[9] buttons Set and press [Done] Press the [List] button to view the play list.Searching VCD ListSelect track you want to play.Part 2. AV (VCD)](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-43.png)
![Part 2. AV (VCD)Within PBC ON state, press the [PBC MENU] button to display the PBC menu screen.Viewing in Full ScreenPress the [Soft1] and select [Full Screen] to view the VCD in full screen.RepeatPress the [MENU] key Press [Repeat] The current track is repeated. Information• Press the [PBC OFF] button to turn the PBC setting OFF. The play screen will be displayed and the first track is displayed.• Press the [<<] [>>] buttons to move to the previous/next list menu page.• While in PBC ON mode state, turning the power or ignition ON/OFF will return the VCD to PBC OFF state. Information•Press the [Repeat] button again to turn off shuffle.Information•If there are no operations for 10 seconds, the VCD menu will automatically disappear. •Press the [MENU] key or [ ] to display the menu again.•For more information on Sound and Display settings, refer to the Info/Setup section.](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-44.png)
![Starting Mode (Audio)Once Jukebox mode is selected, the Jukebox audio will automatically begin playing. Pressing the [ ] again will pause the current file. Playing Jukebox AudioPress the [HOME] key Select [Jukebox]Selecting Jukebox Audio FilesOnce [Jukebox] is selected, the most recently operated mode (Audio, Image, and Video) will operate.Information• If there are no files saved in the Jukebox, then the Jukebox button will be disabled. Information• If the most recently operated mode was video or image mode, press [MENU] > [Jukebox Audio] to operate Audio mode.Press the [List] button to check the play list.Searching Jukebox Audio ListsSelect the desired file you want to play.Part 2. AV (JUKEBOX)While playing Shortly press the [ ] in ← or → direction (under 0.8 seconds) or shortly press the [SEEK/TRACK] key to select the previous/next file.](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-48.png)
![Fast-forwarding or Rewinding Jukebox Audio Files Searching Jukebox Audio FilesPress the [MENU] key to use the Repeat, Shuffle, Scan, Auto Playlist, Sound Settings and Display Settings. This menu is also used to move to other Jukebox modes. Using the Menu ButtonsWhile playing Press and hold the [ ] in ← or → direction (over 0.8 seconds) or press and hold the [SEEK/TRACK] key to fast-forward/rewind the current file.Part 2. AV (JUKEBOX)While the [ ] or [SEEK] [TRACK] key is being operated, the file will rewind or fast-forward at a high speed. Once released, the file will begin playing at normal speed.During search, the file name is displayed in blue. Press the [ ] or [TUNE/FILE] knob to play the selected file and display the basic display info. Turn the [ ] or [TUNE/FILE] knob in Ω directions to search for files.](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-49.png)
![Part 2. AV (JUKEBOX)ShufflePress the [MENU] key [Shuffle] [Shuffle]Information•Press [Off] to turn the Shuffle feature off.Information•Press [Off] to turn the Repeat feature off.Information•Press [Off] to turn the Scan feature off.The beginning part (approximately first 10 seconds) of all files within the current folder or all Jukebox files are scanned.ScanPress the [MENU] key [Scan] Select [Scan Playlist]RepeatPress the [MENU] key [Repeat] [Repeat]The current song or the all files within the folder can be repeated.](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-50.png)
![Press the [MENU] key [Jukebox Video]Press the [MENU] key [Jukebox Image]File Info/Play InfoTo return to the previous screen, press the [Play Info] button. Information•Information will not be displayed for MP3 files without file information. • For more information on Sound and Display settings, refer to the Info/Setup section. Part 2. AV (JUKEBOX)List of songs similar with the current song is displayed. The list can be used to select desired songs.Auto PlaylistPress the [MENU] key Select [Auto Playlist]Moving to Jukebox Video Moving to Jukebox ImagePress the [Soft1] key to select File Info to view file information, such as title, album, artist, genre, fie name, and folder location.](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-51.png)
![Starting Mode (Video)Press the [HOME] key [Jukebox]Part 2. AV (JUKEBOX)Once Jukebox mode is selected, the Jukebox video will automatically begin playing. Pressing the [ ] again will pause the current file. Playing Jukebox Video Selecting Jukebox Video FilesOnce [Jukebox] is selected, the most recently operated mode (Audio, Image, and Video) will operate.Information• If there are no files saved in the Jukebox, then the Jukebox button will be disabled. Information• If the most recently operated mode was audio or image mode, press [MENU] > [Jukebox Video] to operate Video mode.Press the [List] button to check the play list.Searching Jukebox Video ListsSelect the desired file you want to play.While playing Shortly press the [ ] in ← or → direction (under 0.8 seconds) or shortly press the [SEEK/TRACK] key to select the previous/next file.](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-52.png)
![Part 2. AV (JUKEBOX)Fast-forwarding or Rewinding Jukebox Video Files Searching Jukebox Video FilesPress the [MENU] key to use the Shuffle, Repeat, Shuffle, DivX Settings, Sound Settings and Display Settings. This menu is also used to move to other Jukebox modes. Using the Menu ButtonsWhile playing Press and hold the [ ] in ← or → direction (over 0.8 seconds) or press and hold the [SEEK/TRACK] key to fast-forward/rewind the current file.While the [ ] or [SEEK] [TRACK] key is being operated, the file will rewind or fast-forward at a high speed. Once released, the file will begin playing at normal speed.During search, the file name is displayed in blue. Press the [ ] or [TUNE/FILE] knob to play the selected file and display the basic display info. Turn the [ ] or [TUNE/FILE] knob in Ω directions to search for files.](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-53.png)
![DivX SettingsPress the [MENU] key [DivX Settings]Upon first use of this feature, you must register your product through the DivX website. Name Description1. DivX VOD Set DivX VOD relatedoptions2. SubtitleLanguage Set Subtitle language3. VoiceLanguage Set Voice languageThis option is used to play video files within the Jukebox in random order.Part 2. AV (JUKEBOX)ShufflePress the [MENU] key [Shuffle] [Shuffle All]Information•Press [Off] to turn the Shuffle feature off.Information•Press [Off] to turn the Repeat feature off.RepeatPress the [MENU] key [Repeat] [Repeat]The current song or the all files within the folder can be repeated.](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-54.png)
![Viewing in Full ScreenInformation•For more information on Sound and Display settings, refer to the Info/Setup section. Press the [Soft1] key and press [Full Screen] to view the USB in full screen. Part 2. AV (JUKEBOX)Press the [MENU] key [Jukebox Image]Press the [MENU] key [Jukebox Audio]Moving to Jukebox ImageMoving to Jukebox Audio](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-55.png)
![Starting Mode (Image)Press the [HOME] key [Jukebox]Part 2. AV (JUKEBOX)Selecting Jukebox Image FilesOnce [Jukebox] is selected, the most recently operated mode (Audio, Image, and Video) will operate.Information• If there are no files saved in the Jukebox, then the Jukebox button will be disabled. Press the [List] button to check the image list.Searching Jukebox Image ListsSelect the desired file you want to view.While playing Shortly press the [ ] in ← or → direction (under 0.8 seconds) or shortly press the [SEEK/TRACK] key to select the previous/next file. Searching Jukebox Image FilesDuring search, the image name is displayed in blue. Press the [ ] or [TUNE/FILE] knob to play the selected image and display the basic display info. From the searched files, once the desired file name is displayed, press the [ ] or [TUNE/FILE] knob to play the corresponding image.](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-56.png)
![Zoom In/OutPress the [MENU] key [Zoom In/Out] Information•Press the [ ] to restore the original image size.RotatePress the [MENU] key [Rotate]Information• Press the [ ] to restore the original image size. • When images are not all displayed on the screen, pushing the [ ] in up/down/left/right directions will display other images.Slideshow SettingPress the [MENU] key [Slideshow]Image slideshow intervals can be set at [5secs], [10secs], [20secs], [30secs] intervals.Part 2. AV (JUKEBOX)Press the [MENU] key to use the Zoom In/Out, Rotate, Slideshow, Copy, Sound Settings and Display Settings options. This menu is also used to move to other Jukebox modes. Turn the [ ] in Ω direction to enlarge or reduce the image size. The scale can be changed to 1/4, 1/2, 1x, 2x, and 4x. Each time the [ ] is turned, the image is rotated from 0 → 90 → 180 → 270 degrees.](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-57.png)
![Part 2. AV (JUKEBOX)Press the [MENU] key [Jukebox Audio]Moving to Jukebox AudioPress the [MENU] key [Jukebox Video]Moving to Jukebox Video Press the [Soft1] key and select [Full Screen] to view the USB in full screen. Information•For more information on Sound and Display settings, refer to the Info/Setup section.Viewing in Full Screen](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-58.png)
![Starting Mode (Music Mode)Once a USB is connected, the USB Music will automatically begin playing. Pressing the [ ] again will pause USB Music.Playing USB MusicPress the [HOME] button Select [USB]Selecting USB Music FilesWhile playing Shortly push the [ ] in ← or → direction (under 0.8 seconds) or shortly press the [SEEK]TRACK] key to select the previous/next track.Information• If the USB is not connected, then the USB button will be disabled.• If a previously played USB is reconnected, then the song after the most recently played song is played. However, if a different USB is connected or the file information within the USB was changed, then the USB file order information is deleted and will start playing from the first song within the USB.Once a USB is connected, USB Music mode will operate automatically.Part 2. AV (USB)](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-65.png)
![12While playing Push and hold the [ ] in ← or → direction (under 0.8 seconds) or press and hold the [SEEK]TRACK] key to fast-forward/rewind the current file.While the [ ] or [SEEK] [TRACK] key is being operated, the file will rewind or fast-forward at 20x speed. Once released, the file will begin playing at normal speed.Fast-forwarding or Rewinding USB Music FilesShufflePress the [MENU] key Select [Shuffle] [Shuffle Folder] or [Shuffle All]Press the [MENU] key to use the Shuffle, Repeat, Scan, Auto Playlist, Copy, Sound Settings and Display Settings. This menu is also used to move to other USB play modes.Using the Menu ButtonsDuring search, the file name is displayed in blue. Press the [ ] or [TUNE/FILE] knob to play the selected file and display the basic display info. From the searched files, once the desired file name is displayed, press the [ ] or [TUNE/FILE] knob to play the corresponding file.Turn the [ ] or [TUNE/FILE] knob in Ω directions to search for tracks. Searching USB Music FilesPart 2. AV (USB)](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-66.png)
![Name Description1. Shuffle Folder Plays files within the currentfolder in random order.2. Shuffle All Plays files within the USB inrandom order.Name Description1. Repeat Once Repeats play of currentlyplaying file.2. Repeat Folder Repeats the files in thecurrent folder.Name Description1. Scan All Scans files within the USBin random order.2. Folder Scan Searches files within thecurrent folder.1212Information•Press [Off] to turn the Shuffle feature off.Information•Press [Off] to turn the Repeat feature off.Information•Press [Off] to turn the Repeat feature off.The beginning part (approximately first 10 seconds) of all files within the current folder or the entire USB are scanned.ScanPress the [MENU] key Select [Scan] Select [Scan All] or [Scan Folder]RepeatPress the [MENU] key Select [Repeat] Select [Repeat] or [Repeat Folder]The current song or the all files within the folder can be repeated.List of songs similar with the current song is displayed. The list can be used to select desired songs.Auto PlaylistPress the [MENU] key Select [Auto Playlist]Part 2. AV (USB)](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-67.png)
![Part 2. AV (USB)Name Description1. Now Playing Copy currently playing file into the Jukebox2. Current SelectionCopy currently selected file into the Jukebox3. Select Files Select files you want to copy132Copy to JukeboxPress the [MENU] key Select [Copy]Set copy optionsThis feature is used to copy songs within the USB into the JUKEBOX. Information•Copying will be canceled if you move to a different mode while copying is in progress.Move to the USB Video ModePress the [MENU] key Select [USB Video]Move to the USB Image ModePress the [MENU] key Select [USB Image]File Info/Play InfoPress the [LHT] to select File Info to view file information, such as title, album, artist, genre, fie name, and folder location.To return to the previous screen, press the [Soft1] to select Play Info.Information•The title, artist and album info are displayed only when such information is recorded within the MP3 file ID3 tag.•For more information on Sound and Display settings, refer to the Info/Setup section.](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-68.png)
![Starting Mode(Video Mode)Once a USB is connected, the USB Video will automatically begin playing. Pressing the [ ] again will pause USB Video.Playing USB VideoSelecting USB Video FilesWhile playing Shortly push the [ ] in ← or → direction (under 0.8 seconds) or shortly press the [SEEK]TRACK] key to select the previous/next file.Press the [HOME] button Select [USB]Once a USB is connected, USB Video mode will operate automatically.Information• If the USB is not connected, then the USB button will be disabled.• If a previously played USB is reconnected, then the video after the most recently played video is played. However, if a different USB is connected or the file information within the USB was changed, then the USB file order information is deleted and will start playing from the first video within the USB.Part 2. AV (USB)](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-69.png)
![12While playing Push and hold the [ ] in ← or → direction (under 0.8 seconds) or press and hold the [SEEK]TRACK] key to fast-forward/rewind the current file.While the [ ] or [SEEK] [TRACK] key is being operated, the file will rewind or fast-forward at 20x speed. Once released, the file will begin playing at normal speed.Turn the [ ] or [TUNE/FILE] knob in Ω directions to search for files. Searching USB Video FilesFrom the searched files, once the desired file name is displayed, press the [ ] or [TUNE/FILE] knob to play the corresponding file.Press the [MENU] key to use the Shuffle, Repeat, Copy, DivX, Sound Settings and Display Settings. This menu is also used to move to other USB play modes.ShufflePress the [MENU] key Select [Shuffle] [Shuffle Folder] or [Shuffle All]During search, the file name is displayed in blue. Press the [ ] or [TUNE/FILE] knob to play the selected file and display the basic display info. Fast-forwarding or Rewinding USB Video Files Using the Menu ButtonsPart 2. AV (USB)](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-70.png)
![Name Description1. Shuffle Folder Plays files within the currentfolder in random order.2. Shuffle All Plays files within the USB inrandom order.Name Description1. Repeat Once Repeats play of currentlyplaying file.2. Repeat Folder Repeats the files in thecurrent folder.Name Description1. Now Playing Copy currently playing fileinto the Jukebox2. Current SelectionCopy currently selected fileinto the Jukebox3. Select Files Select files to12132Information•Press [Off] to turn the Shuffle feature off. Information•Press [Off] to turn the Repeat feature off.RepeatPress the [MENU] key Select [Repeat] Select [Repeat] or [Repeat Folder]The current song or the all files within the folder can be repeated.Copy to JukeboxPress the [MENU] key Select [Copy]Set copy optionsThis option is used to copy video files within the USB to the JUKEBOX Information•Copying will be canceled if you move to a different mode while copying is in progress.Part 2. AV (USB)](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-71.png)
![Name Description1. DivX VOD Set DivX VOD features2.SubtitleLanguage Set subtitle language3.VoiceLanguage Set Voice language132Press the [MENU] key Select [USB Image]Press the [MENU] key Select [USB Audio]Press the [Soft1] and select [Full Screen] to view the USB in full screen. DivX SettingPress the [MENU] key Select [DivX Setting]When using DivX for the first time, you must register the product through the DivX website.Information•For more information on Sound and Display settings, refer to the Info/Setup section.Move to the USB Image ModeMove to the USB Audio ModeViewing in Full ScreenPart 2. AV (USB)](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-72.png)
![Starting Mode (Image Mode)Selecting USB Image FilesWhile playing Shortly push the [ ] in ← or → direction (under 0.8 seconds) or shortly press the [SEEK]TRACK] key to select the previous/next file.Turn the [ ] or [TUNE/FILE] knob in Ω directions to search for files. Searching USB Image FilesDuring search, the image name is displayed in blue. Press the [ ] or [TUNE/FILE] knob to play the selected image and display the basic display info. From the searched files, once the desired file name is displayed, press the [ ] or [TUNE/FILE] knob to play the corresponding image.Press the [HOME] button Select [USB]Once a USB is connected, USB Image mode will operate automatically.Information• If the USB is not connected, then the USB button will be disabled.• If a previously played USB is reconnected, then the image after the most recently played image is played. However, if a different USB is connected or the file information within the USB was changed, then the USB file order information is deleted and will start playing from the first image within the USB.Part 2. AV (USB)](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-73.png)
![Press the [MENU] key to use the Zoom In/Out, Rotate, Slideshow, Copy, Sound Settings and Display Settings options. This menu is also used to move to other USB play modes. Zoom In/OutPress the [MENU] key Select [Zoom In/Out]Turn the [ ] in Ω direction to enlarge or reduce the image size. The scale can be changed to 1/4, 1/2, 1x, 2x, and 4x. RotatePress the [MENU] key Select [Rotate]Each time the [ ] is rotated, the image is rotated from 0 → 90 → 180 → 270 degrees.Slideshow SettingPress the [MENU] key Select [Slideshow]Image slideshow intervals can be set at[5secs], [10secs], [20secs], [30secs] intervals.Information• Press the [ ] to restore the original image size.• When images are not all displayed on the screen, pushing the [ ] in up/down/left/right directions will display other images. Information• Press the [ ] to restore the original image size.Using the Menu ButtonsPart 2. AV (USB)](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-74.png)
![Part 2. AV (USB)Name Description1. Now Playing Copy currently playing file2. CurrentSelectionCopy by selecting desiredfiles from list3. Select Files Select files you want to copy123Move to the USB Audio ModePress the [MENU] key Select [USB Image]Move to the USB Video ModePress the [MENU] key Select [USB Audio]Viewing in Full ScreenPress the [Soft1] and select [Full Screen] to view the file in full screen. Copy to JukeboxPress the [MENU] key Select [Copy]Set copy optionsThis option is used to copy image files within the USB to the JUKEBOX Information•Copying will be canceled if you move to a different mode while copying is in progress.Information•If there are no operations for 10 seconds, the menu will automatically disappear. •Press the [MENU] key or [ ] to display the menus again.•For more information on Sound and Display settings, refer to the Info/Setup section.](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-75.png)
![1 3 42Once an iPod is connected, iPod mode will operate automatically.While playing Push and hold the [ ] in ← or → direction (under 0.8 seconds) or press and hold the [SEEK]TRACK] key to fast-forward/rewind the current song.Once an iPod is connected, the iPod will automatically begin playing. Pressing the [ ] again will pause the iPod.Playing iPod Fast-forwarding or Rewinding iPod FilesWhile the [ ] or [SEEK] [TRACK] key is being operated, the songs will rewind or fast-forward at 20x speed. Once released, the song will begin playing at normal speed.Selecting iPod FileWhile playing Shortly push the [ ] in ← or → direction (under 0.8 seconds) or shortly press the [SEEK]TRACK] key to select the previous/next song.NOTICE•Some iPods with unsupported communication protocols may not properly operate in the Audio Video Navigation system.Starting ModePress the [HOME] button Select [iPod]Part 2. AV (iPod)](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-79.png)
![1Press the [List] button to display the initial iPod menu screen.When searching iPod, it is possible to search by Play list, artist, album, song, genre, composer, audiobook, and Podcast.Press the [MENU] key to use the Shuffle, Repeat, Auto Playlist, Sound Settings and Display Settings.Searching iPod List Using the Menu ButtonsShufflePress the [MENU] key Select [Shuffle] Select [Shuffle] or [Shuffle Album]Turn the [ ] or [TUNE/FILE] knob in Ω directions to search for songs. During search, the song name is displayed in blue. Press the [ ] or [TUNE/FILE] knob to play the selected song and display the basic display info. Searching iPod FilesFrom the searched songs, once the desired song name is displayed, press the [ ] or [TUNE/FILE] knob to play the corresponding song.Information• If the search mode is accessed while playing a song, the most recently searched step will become displayed.• Upon initial connection, the search steps may differ depending on the type of iPod device.Part 2. AV (iPod)](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-80.png)
![Part 2. AV (iPod)Name Description1. Shuffle Plays songs within play listin random orderName Description1. Repeat Repeats play of currentlyplaying file.1Information•Press [Off] to turn the Shuffle feature off.Information•Press [Off] to turn the Repeat feature off.RepeatPress the [MENU] key Select [Repeat] Select [Repeat]The current song or the all files within the folder can be repeated.Auto PlaylistList of songs similar with the current song is displayed. The list can be used to select desired songs.Press the [MENU] key Select [Auto Playlist]File Info/Play InfoPress the [LHT] to select Play Info to view file information, such as title, album, artist, genre, and composer.To return to the previous screen, select [Play Info]. Information• No information are shown for MP3 files without file information.• For more information on Sound and Display settings, refer to the Info/Setup section.](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-81.png)
![Part 2. AV (AUX)Starting ModePress the [HOME] button Select [AUX]External AUDIO and VIDEO players (Camcorders, car VCR, etc.) can be played through a dedicated cable. The position of the AUX jack is at the top of the gear box located between the driver and passenger seats.Information• If an external device connector is connected with the AUX terminal, then AUX mode will automatically operate. Once the connector is disconnected, the previous mode will be restored.• AUX mode can be used only when an external audio/video player (camcorder, car VCR, etc.) has been connected.• The AUX volume can be controlled separately from other AV modes.Information• Connecting a connector jack to the AUX terminal without an external device will convert the system to AUX mode, but only output noise. When an external device is not being used, also remove the connector jack.• When the external device power is connected to the power jack, playing the external device may output noise. In such cases, disconnect the power connection before use.Information•The color saturation option is not supported when using the PAL color system within this device.](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-82.png)
![Part 2. AV (Bluetooth Audio)Starting ModePress the [HOME] button Select [Bluetooth Audio] Press the [ ] button to begin playing Bluetooth Audio. Pressing the [ ] again will pause the Bluetooth Audio.Playing Bluetooth AudioSelecting Bluetooth AudioWhile playing Shortly push the [ ] in ← or → direction (under 0.8 seconds) or shortly press the [SEEK]TRACK] key to select the previous/next song.Information• The title/artist info may not be supported in some mobile phones.• For more information on Sound and Display settings, refer to the Info/Setup section.Information•If the Bluetooth® device is not connected, then the [Bluetooth Audio] button will be disabled.](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-85.png)
![Safety Cautions•For safety, some functions will be inactive while the vehicle is in motion. Buttons that cannot be operated will be inactive. Roads names and POI information may not always be completely updated. Some places may not include up-to-date information.The route displayed for destination guidance is a reference that will take you to the vicinity of your destination. The navigation system uses GPS information, various sensors, road map data, and other related information to display the current position. Errors may occur if the satellite is transmitting inaccurate signals or if which can only two or less satellite signals can be received. Errors which occur in such conditions cannot be corrected.The current position may become displayed on at a place somewhat different from your actual location. The car position mark may differ from the actual location due to the state of the GPS satellites or the vehicle (driving location and conditions). In addition, the car position mark can become deleted from the actual position when driving on roads different from the map data, such as newly constructed roads. • Even if the car position mark on the map is different, map matching or GPS info are used to automatically update the current position. (In such cases, up to several minutes may be required.)Before Use•When a button function is operating, the color of the selected button will be displayed differently. •To return to the previous screen, press the [Back] button. •Press the [Back] button to cancel the functions that can be operated on the current screen. (Some functions may not be canceled.)Operating the NavigationInformation•Buttons that cannot be operated will be inactive.Part 3. Navigation](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-87.png)
![About Map IconsSome roads, site names, facility information and fare rates may have changed after map data development and may differ with actual road conditions.About the MapAbout Map ScaleIf [100m] is displayed on the left side of the map, this represents a map scale of 1/10,000. Icons displayed on the map may be different with actual conditions. Also, display of multiple icons may be displayed under one mark. About Map DBUnlicensed copying of the map in any form, in full or in part, is strictly prohibited.About Map UpdatesFor up-to-date maps and software, visit the site (blu.hyundai.com) and download related files to an SD card. To learn more, refer to the System Update section of this userrs manual.Information• Turn the [ ] left/right to change the scale. DisplayScale Display Scale150m 1 /15,000 4ml 1 /4ml300m 1 /30,000 8ml 1 /8ml700m 1 /70,000 16ml 1 /16ml0.25ml 1 /0.25ml 32ml 1 /32ml0.5ml 1 /0.5ml 64ml 1 /64ml1ml 1 /1ml 130ml 1 /130ml2ml 1 /2ml 250ml 1 /250mlPart 3. Navigation](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-88.png)
![Initial ScreenPress the [Agree] button to display the most recently used modePress the [MAP] key to display the map of the current position and the neighboring area.Information• When riding in a new car or after replacing the battery terminal, the car position mark may appear at a location different from your actual current position.• Even if the car position mark on the map is different, map matching or GPS info are used to automatically update the current position.Information• If you turn the vehicle ignition is turned on, the User Warning screen will always be displayed. Make sure to carefully read the page as it contains important information related to system operations while driving.Displaying the Current PositionIf AV mode is used with the navigation turned on, navigation guidance will be provided in the background. If you turn the ignition on, then the most recently played mode will restart..MarkPress the [MAP] key Press [MENU] [Mark]This feature is used to save the current position or the scrolled position as a My Place.To save the position, press the [ ] after selecting the desired group.Part 3. Navigation](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-91.png)
![Information• My Places are saved without distinction for the driving state or the scrolled state.• To edit or delete registered mark, refer to the My places section.POIPress the [MAP] key Press [MENU] Press [POI]Within the screen when the POI menus are displayed, pressing one of the 6 facility icon buttons will display the corresponding facilities.Name Details1. POI Icons Sets POI facilities2. Edit POI IconSets the 6 POI icons to thedesired genre through userediting3. Local POI Moves to Search by POIscreen123Map SettingsPress the [MAP] key Press [MENU]Map ModeSets map related options, such as map direction, traffic information and sound/volume adjustment.12345Information• If the map scale is above 16mi, the map display mode will be changed automatically to 2D North-Up.Name Details1. HeadingUp/North UpDisplays map in Vehicle TravelingDirection(Heading Up) or theNorth-Up direction2. Traffic Provides traffic information on thescreen or by voice3. Mute Mute route guidance sound4. Volume Adjust outgoing volume of routeguidance5 . RouteOptionDisplays a menu to change routesettings and conditions6. AutoZoomSets whether to automaticallyadjust the map scale when thevehicle is in motion6Part 3. Navigation](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-92.png)
![QuickPress the [DEST] key Press [Quick]Name Details1. Quick Lists Registered Quick menulists2. Edit QuickMenuAdd and delete Quickmenu lists3. Menu Lists Editable Quick menu lists4. Deselect All Unmark all selected Quickmenu5. Done Finishes editing QuickmenuInformation• Among 11 quick menus, Up to 7 quick menu can be added to Quick menu.Favorites23412351These menus allow you to set frequently used menu to Quick List.To add or delete Quick list, press the [Edit Quick Menu] button.Press the [DEST] key Press [Favorites] This feature is used to register frequently visited positions to favorites.Press the [Edit Favorite Place] to add or delete favorites.Part 3. Navigation](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-94.png)
![Address SearchPress the [DEST] key Press [Search by Address] 123This search feature is used to search destinations by addresses through street/ tower/city/country names..Name Details1. Street Destination search byentering the street address2. Select City Destination search byentering the city name3. State Selects statePOI SearchPress the [DEST] key Press [Search by POI] Select the desired Category1234This search feature is used to search destinations by criteria (Near current position, Near scroll mark, Near destination)56Name Details1. Favorites lists Registered Favorites lists2. Edit Favorites Adds edit, and deletesFavorites3. Menu Lists Editable Quick Menu listsInformation• Up to 7 positions can be added to Favorites.Part 3. Navigation](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-95.png)
![These search features allow you to search previous routes and set as destinations or waypoint.Previous DestinationsPress the [DEST] key Press [Previous Destinations] These search features allow you to search previous start points and set as destinations or waypoint..These search features allow you to search previous searches and set as destinations or waypoint.Previous Start PositionPress the [DEST] key Press [Previous Start Position] Previous SearchesPress the [DEST] key Press [Previous Searches] EmergencyPress the [DEST] key Press [Emergency] This menu is used to search nearby police stations, hospitals, dealer shops.Name Details1. Near CurrentPositionSearches POI around thevehicle's current position2. Near ScrollMarksearches facilities based onthe current scrolled position3. NearDestinationsearches facilities based onthe location of thedestination4. Near citycentresearches facilities based onthe selected location5. Category Selects POI categories6. POI Mark Selects POI marksPart 3. Navigation](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-96.png)
![My PlacesPress the [DEST] key Press [My Places] This search feature is used to search destinations by selecting previously saved My Places from the list to set asDestinations.Name Details1. Sort Sort POIs and locations byname/symbol/date2. Add Adds a new place to My Placegroup3. Edit Edits selected place4. Delete Deletes selected place5. Delete All Deletes all registered places6. Edit groupname Edits My Places group name12IntersectionPress the [DEST] key Press[Intersection]3456This search feature is used to searchdestinations by streets and intersectionsthrough road/city/country.Part 3. Navigation](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-97.png)
![This feature is used to search the locations of POIs by entering the phone number of the facility you wish to search. When entering the phone number, the area code must be included.Phone NumberPress the [DEST] key Press [Phone Number] Information• The telephone number and location may not the same for some POIs. In addition, the following types of facilities may be more frequently located in other locations.•Locations of department stores, museums, and amusement parks may somewhat differ from the set destination. Check the exact address when trying to reach such destinations.Within general information newspapers, there are cases when phone numbers of concert halls list the numbers of managing companies. In such cases, searches will be to the managing company. • The telephone number and addresses may change at any time. CoordinatesPress the [DEST] key Press [Coordinates]This feature is used to search the locations by entering longitude and latitude.Previous MapPress the [DEST] key Press [Previous Map] Information• When entering one digit number, 0(zero) should be entered first.Part 3. Navigation](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-98.png)
![After searching for the destination according to the map search method, select the desired destination from the list.(For more information on destination search methods, refer to the Destination Search section.)Name Details1. Set asDestinationSets the facility or position wherethe cursor is positioned as the newdestination2. AddWaypointSets the facility or position wherethe cursor is positioned as awaypoint3. Mark Marks the facility or position wherethe cursor is positioned4. POI Sets destination by searching POI5. CallMakeing a phone call to the facilityor position where the cursor ispositionedThe previously displayed position is displayed by scrolling the map.23451Set as Destination<Alternative Route><Route Overview>After verifying the location of the searched position, select the [Set as Destination] button to calculate the route. The Route Overview or Multipath screen will be the displayed. Within the Route Overview or Alternative Route screen, press the [Map] key or the [Start Guidance] button to begin guidance. To add a destination, press the [Add Waypoint] button.Press the [DEST] key Press [Search by Address] Search destination and press [Set as Destination] Part 3. Navigation](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-99.png)
![Information• If you select the [Set as Destination] button while a previous destination has already been set, the pop-up Do you want to change the destination? is displayed.• If you select [Yes], then the previous destination is deleted and the new destination will be set.• If you select [Add Waypoint], then a new waypoint is added.• To learn more about Alternative Route , Route Overviewwor Detailed Route Settings , refer to the Route Menu section.SimulationOnce route calculation is complete, Press the [Simulation] button to view a demo of the route guidance.During Simulation, pressing the [Map] key will end the Simulation and display the current map position. If you start driving the vehicle while viewing the route Simulation, demo will end and route guidance will start.Information• Simulation will not operate after route guidance has begun. When wishing to use the Demo feature, please use after route calculation but prior to receiving route guidance.Part 3. Navigation](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-100.png)
![Add WaypointPress the [MENU] Key Press [AddWaypoint] Searching for the destination according to the map search method after searching for waypoints within the map screen, press the [Add Waypoint] key to add the waypoint to the current route.Route OptionsPress the [MENU] Key Press [Route Options] Information• For more information on Fastest, Shortest, and other calculating options, refer to the Route Option section.Selecting the [Route Options] will display a pop up that allows you to change route settings and conditions. Once the settings are changed, the route will be recalculated by reflecting the changes.Cancel RoutePress the [MENU] Key Press [Cancel Route] Press [Yes]Cancels and deletes the currently designated destination.Part 3. Navigation](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-101.png)
![Motorway Mode<All><Summary><Rest Area>Upon entering a motorway during route guidance, the motorway mode will automatically be displayed. This mode is displayed when driving on an expected route and display mainly motorway related POIs.Information• Some POIs may not be displayed if seven(7) or more POIs exist within the position.Selecting [All], [Summary], [Rest Area] at the bottom right side of the screen will change the route guidance mode.Press the [ ] left/right to switch display mode and check POI info list.Part 3. Navigation](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-103.png)
![123451234Guidance to the current route is canceled.Press the [NAVI] key Press [Route] Press [Cancel Route] Press [Yes] Cancel Route Route Overview[Press the [NAVI] key Press [Route] Press [Route Overview] Name Details1. StartGuidance Starts route guidance to the destination2. Edit Waypoint Add/delete/change order ofdestinations/waypoints3. RouteInfo/DetourRoute guidance information to the setdestination and calculate detours4. AlternativeRouteDisplays various alternative routeoptions to select the desired routecalculation method5. Simulation Route simulation to the set destinationWithin the Route Overview screen, pressing the [Alt. Route] button or setting ‘Calculate Alternative Routes upon Calculation’ within Navigation Setup will display alternative routes on the screen.Name Details1. Fastest Recommended route that reflectsdistance and traffic conditions2. Shortest The shortest distance from start pointto destination12Part 3. Navigation](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-105.png)
![This option provides calculates routes by reflecting the average speed of streets and roads to the destination.Press the [NAVI] key Press [Route] Press [Route Options] Route OptionFastestShortestThis option provides guidance by calculating the shortest distance route to the destination.Advanced SettingsAdvanced settings allow you to set whether to include motorways, toll roads or ferries within route calculation.Name Details1. MinimiseMotorwayRoute calculation with minimaluse of motorways2. Minimise TollRoadsRoute calculation with minimaluse of toll roads3. Use Ferries Route calculation byincluding/not including ferries4. Use HOVlanesRoute calculation by includinguse of HOV lanes5. Use EasypassRoute calculation by includinguse of Easy pass6. Use GatedRoadsRoute calculation by includinguse of Gated roadsPart 3. Navigation](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-106.png)
![Edit WaypointPress the [NAVI] key Press [Route] Press [Edit Waypoint] This feature displays the start point, waypoints and thee destination in list format and is used to edit corresponding positions or edit the order of the destinations included within the route.Press the [NAVI] key Press [Route] Press [Destination Info] Shows the estimated arrival time, remaining distance, waypoint information, and map of the destination.Destination InfoInformation• If you press the [Detour] button, you can set an area to detour in 1/2/5/10km units for route calculation. Route InfoPress the [NAVI] key Press [Route] Press [Route Info] This feature is used to check the key routes and re-set the route by setting detours for a fixed distance from the current positionPart 3. Navigation](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-107.png)
![12345Press the [NAVI] key Press [Route] Press [Avoid Area] Avoid AreaIt is possible to add/edit/delete avoid areas. Use the [controller] to set the range of the area you wish to avoid.Name Details 1. Edit Name Edit name of Avoid Area2. Edit Edit size and area of AvoidArea3. Delete Delete set Avoid Area4. Avoid Avoid the set area5. Done Finalize settingPart 3. Navigation](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-108.png)
![Press the [NAVI] key Press [NAVI Setup] Press [Main] MainThis option is used to set the unit when displaying the vehicle speedUnitEstimated Time ofThis option is used to set the estimated arrival time or the remaining time to the destination.Distance and Time toThis option is used to set the distance and time to the destination or waypointFuel TypeThis option is used to set the fuel type. Select a VoiceThis option is used to set the navigation voice.Part 3. Navigation](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-110.png)
![This feature is used to set the color of the route indicator line.Press the [NAVI] key Press [NAVI Setup] Press [Display] DisplayRoute Indicator LineMap Font SizeThis option is used to set the size of the font shown in the map between 3 levels.Map ColorThe map color can be set according to Day/Night/Auto modes.TraceThis option is used to set whether to display the trace on the mapPart 3. Navigation](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-112.png)
![Distance Setup.1234Press the [NAVI] key Press [NAVI Setup] Press [Route Search]Route Search12Name Details1. UseAlternativeRoute SearchSearch for alternative routeswhen calculating routes2. Uponrecalculation,displayrouting optionsSets whether to display routingoptions upon recalculatingroutesPress the [NAVI] key Press [NAVI Setup] Press [Guidance] GuidanceDriver Alert GuidanceThis option is used to set whether provide guidance in various driving conditions.Camera Alert GuidanceThis option is used to set whether provide guidance in various conditions.Part 3. Navigation](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-113.png)
![Name Details1. InitializeSettingsused to initialize previous setnavigation settings back tothe default state2. MemoryPointsused to initialize all searched lists, memory points and saved navigation informationPress the [NAVI] key Press [NAVI Setup] Press [Default] DefaultInitialize SettingsThis option is used to initialize previous set navigation settings back to the default state.12.Press the [NAVI] key Press [NAVI Setup] Press [Traffic]TrafficPart 3. Navigation](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-114.png)
![GPS Info When GPS information cannot be usedGPS information may not operate under the following conditions. - When buildings, tunnels, or other obstructions block satellite signals - When materials are placed above the GPS antenna and block satellite signals - When the satellite is not transmitting - When a digital cellular phone (1.5GHz) is placed near the GPS antennaErrors unavoidable due to system characteristicsThe navigation system uses GPS information, various sensors, road map data, and other related information to display the current position. Errors may occur if the satellite is transmitting inaccurate signals or if which can only two or less satellite signals can be received. Errors which occur in such conditions cannot be corrected.GPS (Global Positioning System) is a system developed and operated by the United States which determines the current location of the user (longitude · latitude, etc) by generally using 3 or more satellites. This system is used with related GPS information, various sensors, road map data, and other related information for the purposes of navigationAbout GPSInformation• For continued map updates, information collection and surveys are continuously being conducted to check for changes to roads and new road construction. Nonetheless, roads, facilities, and fares are under constant change. Consequently, it is impossible to completely delete any errors, including road updates, names, facilities, and fares. Keep such matters in mind when using GPS. • In principle, roads with widths less than 3m are not included within the map data. Roads including sections with widths less than 3m may be deleted upon updating the map dataGPS InfoPress the [MENU] key Select [GPS Info] This option is used to display the GPS satellite reception state, car speed and position.Part 3. Navigation](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-115.png)
![PART 4. BLUETOOTHWhen no phones have been pairedInformation• Press the [Help] button within the pop-up to view the help section with information related to pairing and connecting Bluetooth devices, and using Handsfree related features.• To learn more about searching from Bluetooth devices and pairing, refer tothe user's manual for your Bluetooth device.If the system becomes unstable or the authentication popup is not displayed due to some communication error, please wait or reset the Bluetooth device and try again.Pairing and Connecting a PhonePress the [PHONE] button Select [Connections] Select [Add New] Enter passkey from the Bluetooth deviceWhen a phone is already pairedPress the [PHONE] button Select [Connections] Select the device from the device list Select ConnectSelect the device you want to connect and press the [Connect] button.If the phone you want to connect does not exist, press the [Add New] button to pair a new Bluetooth device.When the Waiting to Pairrscreen is displayed, search for your mobile device and enter the passkey. The default passkey is set to 0000 .](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-119.png)
![PART 4. BLUETOOTHPairing Additional DevicesInformation• When a Bluetooth device is connected, a new device cannot be paired. If you want to pair a new phone, first disconnect the connected Bluetooth device.Press the [Add New] button to pair a new Bluetooth device.For more information on pairing, refer to the When no phones have been pairedsection.Information• Bluetooth features supported within the vehicle are as follows. Some features may not be supported depending on your Bluetooth device. - Answering and making Bluetooth Handsfree calls - Menu operation during a call (Switch to Private, Switch to call waiting, Outgoing volume) - Download Call History - Download Mobile Contacts - Download USIM Contacts - Download contacts to vehicle - Contacts/ Call History Auto Download - Bluetooth device auto connection Bluetooth Audio Streaming • It is possible to pair up to five Bluetooth devices to the car system. • Only one Bluetooth device can be connected at a time. • Other devices cannot be paired while a Bluetooth device is connected.• While connecting a Bluetooth device, the cancel operation is not supported. • Only Bluetooth Handsfree and Bluetooth audio related features are supported.Information• Normal operation is possible only within devices that support Handsfree or audio features, such as a Bluetooth mobile phone or a Bluetooth audio device.• Only one function can be used at a time between the Bluetooth Handsfree and Bluetooth audio. (While playing Bluetooth audio, streaming will end upon entering the Bluetooth phone screen.) • If a connected Bluetooth device becomes disconnected due to being out of communication range, turning the device OFF, or a Bluetooth communication error, corresponding Bluetooth devices are automatically searched and connected. • If the system becomes unstable due to communication errors between the vehicle and the Bluetooth device, reset the Bluetooth and try again. Upon resetting Bluetooth, the system is restored to its factory release state.](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-120.png)
![PART 4. BLUETOOTHInformation•If a paired phone is deleted, the call history and phone book lists will also be deleted. Disconnecting a DeviceA device cannot be deleted when it is connected. To delete a paired device, first disconnect the Bluetooth connection. Press [Delete All] to delete all paired Bluetooth devices.Select the device you want to disconnectPress [Disconnect] Press [Yes]Deleting DevicePress the [MENU] key Press [Delete] Press [Yes]](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-121.png)
![Making/Answering CallsInformationMost functions within AV mode and INFO will not operate during a Bluetooth Handsfreecall. Only the call volume and Navigation screens can be operated.Starting ModeEnter number on the dial pad Press the [Send] button or the [ ] key on the steering remote controller.Calling by dialing a numberIf you press the Send button without entering a number, the Call History screen is displayed.Press and hold the dial pad 0 + (over 0.8 seconds) to enter a "+".Making a call from Speed DialEnter the 1 or 2 digit speed dial number with the Dial Pad Press and hold the last number.Information• For speed dials saved within mobile phones, up to 2 digits are supported.• Saving or changing speed dial numbers through the head unit.Calling through RedialPress the hold (over 0.8 seconds) the [Send] button or the key on the steering remote controller.InformationRedialing is not possible when there is no call history or the Bluetooth phone has not been connected.](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-123.png)
![Information• Calling through the call history is not possible when there is no call history or the Bluetooth phone has not been connected.Making a call from Call history Answering a callWhen a call is received on the connected phone, the bell will sound and the phone number of the other party will be displayed on the incoming call pop-up, as shown here.Information• When the incoming call pop-up is displayed, most functions within AV mode and SETUP will not operate. Only the call volume and Navigation screens can be operated.• The telephone number may not be displayed in some mobile phones.Rejecting a callPress the [Send] button or the Key on the steering remote controller Select the call list Press [Call]Information• The reject call function may not be supported in some mobile phones.Incoming call notice Press the [Accept] button or the [ ] key on the steering remote controller.Incoming call notice Press the [Reject] button or the [ ] key on the steering remote controller.](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-124.png)
![Operating Menus during a Call InformationThe Private function may not be supported in some mobile phones.During Handsfree call Press the [Private] button or press and hold the [ ] key (over 0.8 seconds) on the steering remote controller.The call will be switched from the Handsfreeto the Bluetooth mobile phone.Switching Call to the Bluetooth phoneSwitching Call to the HandsfreeDuring call on mobile phone Press the [Use Handsfree] button or press and hold the [ ] key (over 0.8 seconds) on the steering remote controller.The call will be switched from the Bluetooth mobile phone to the car handsfree.Ending a callWhile on a call Press the [End] button or the [ ] Key on the steering remote controller.The Bluetooth handsfree call will end.](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-125.png)
![Information• Call waiting is a feature that allows the caller to answer a second call while already on a call. When call waiting is used, the first call is placed on waiting mode.• The Private function may not be supported in some mobile phones.If another person calls while you are already on a call, the current call must be placed on hold or ended to answer the new call.If there is waiting call, press the [ ] key on the steering remote controller (under 0.8 seconds) or press the [Switch] button on the Phone screen.While on a call Select [Mute]Switching to Call WaitingWhile on a call Use the [VOL] knob on the head unit or the [+], [-] keys on the steering remote controller to adjust the ring/call volume.Setting Mic OffIf you press the [Mute] button, The outgoing volume is muted and blocked to the other party.InformationThe volume heard by the other party may differ depending on the mobile phone. If call volume heard by the other party is too low or too high, first adjust the volume setting.Adjusting the Ring/Call VolumeName Description1. Hold 1st call Places current call on callwaiting and answer new call2. End 1st call Ends current call and answernew call3. Reject Rejects new call andmaintains current call4. SwitchIf there is a call waiting,switches to the waiting callwaiting call](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-126.png)
![Name Description1. Send Calls the corresponding number2. Search Search contacts by name or number3. Download Download contacts from Bluetooth device4. Contacts List Downloaded Contacts5. MENU Displays menu screenInformation• If there are numerous list entries, selecting the list page area will move to the corresponding list page.• It is possible to download contacts even during a call or during Bluetooth streaming audio. • When downloading call histories, the icon will be displayed within the status bar. • It is not possible to commence download when the contacts download feature has been turned of within the Bluetooth device. In addition, some devices may require device authorization upon attempting to download contacts. If downloading does not normally occur, check the Bluetooth device settings or the screen state. • The download feature may not be supported in some mobile phones. Check to see that the Bluetooth device supports the download feature. For more information of supported Bluetooth devices and function support, visit the BLUmembers website (blu.hyundai.com)• Mobile and car contacts data could be lost depending on the state of the head unit. Please back up important data within a safe location.Information• Mobile phone contacts can only be searched when a Bluetooth device is connected. • Up to 5,000 contacts saved in your Bluetooth phone or USIM can be downloaded into the car contacts. Contacts that have been downloaded to the car cannot be edited or deleted. • Mobile phone contacts are managed separately for each paired Bluetooth device (max 5 devices x 5,000 contacts each). Previously downloaded data is maintained even if the Bluetooth device has been disconnected. (However, the contacts and call history saved to the phone will be deleted if a paired phone is deleted.)ContactsPress [PHONE] button Select [Contacts]](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-127.png)
![Information• Upon downloading mobile phone contacts,the previous corresponding datais deleted.• This feature may not be supported insome mobile phones.• Upon downloading, contacts saved inyour USIM and mobile phone are simultaneously downloaded.• When using Contacts Sync, the contactsand call histories within your mobile phone are automatically downloaded upon connecting Bluetooth. If you do not wish to use this feature, turn Contacts Sync Setting off.Press the [MENU] keyyPress [Download] Press [Yes] Download Mobile Phone ContactsName Description1. Received Displays the incoming call history list2. Dialed Displays the outgoing call history list3. Missed Displays the missed call history list4. Send Dial to selected number5. Delete All Delete entire call historyEntering Call History ScreenPress the [PHONE] Key Select [Call History] Information• The call history may not become saved in the call history list in some mobile phones.• Calls received with hidden caller ID will not become saved in the call history list.](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-128.png)
![Press the [Search] Key Select [Search by Name]Searching Contacts (By Name)InformationWhen searching a number, it is possible to search by entering a part of the entire number. (ex: if you enter 1544 , all numbers with 1544 will be searched.After inputting is complete, press the [Done] button to save.InformationUpon search, initial search and intermedial search is supported.Searching Contacts (By Number)Press the [Search] Key Select [Search by Number]After inputting is complete, press the [Done] button to save to search saved numbers.](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-129.png)
![Name Description1. Off Disables auto connection2. Previous PhoneAuto connection with the previously connected Bluetooth phone3. User Selected PhoneDisplays the outgoing call history list4. Connect by PriorityAutomatically connects according to the set Bluetooth phone priorityBluetooth SettingsThis option is used to select ringtones for the connected phone.Auto ConnectionPress the [Settings] key Select [Auto Connection]If auto connection is turned on, a Bluetooth device will automatically be connected according to the option setting when the car ignition is turned on.RingtonesPress the [Settings] Key Select [Ringtones]Contacts SyncPress the [Settings] key Select [Contacts Sync]When connecting a Bluetooth device, it is possible to automatically download new contacts.This option is used to check messages (SMS) through the vehicle handsfree.SMSPress the [Settings] Key Select [SMS]Bluetooth AudioPress the [Settings] key Select [Bluetooth Audio]You can play music files saved in your Bluetooth device from the car.](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-130.png)
![Name Description1. Delete all call historyDelete all dialed / received/ missed call lists2. Delete All MessagesDelete all received messages3. Delete All PhonesDelete all registered phones4. Factory DefaultsReset Bluetooth settings and data to factory stateThis option is used to check information about the connected device, such as device name, address, and type.Device InformationPress the [Settings] Key Select [DeviceInformation]Data InitializationPress the [Settings] Key Select [Data Initialization]When connecting a Bluetooth device, it is possible to automatically download new contacts.This option is used to change the passkey needed upon connecting a Bluetooth phone.Change PasskeyPress the [Settings] key Select [Change Passkey]InformationThe default pin code is 0000 .](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-131.png)
![XM DataPart 6. INFOWeatherPress the [XM Data] button Press [Weather]12TrafficPress the [XM Data] button Press [Traffic]123Starting ModePress the [HOME] Key Press [INFO]](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-133.png)
![Part 6. INFOSportsPress the [XM Data] button Press [Sports]StocksPress the [XM Data] button Press [Stocks]12Auto Door LockPress the [Car Settings] button Press [Auto Door Lock]This option enables doors to be automatically locked in certain conditions (vehicle speed, shift lever).Car Settings](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-134.png)
![Part 6. INFOTurning on this option enables doors to be automatically unlocked in certain conditions (vehicle speed, shift lever).Auto Door UnlockPress the [Car Settings] button Press [Auto Door Unlock]Easy Steering AccessPress the [Car Settings] button Press [Easy Steering Access]Turning on this option will automatically move the steering wheel when the ignition is turned off and re-position it when the ignition is turned on again.Turning on this option will sound a signal when the car is locked/unlocked when using a remote control. Door Lock SoundPress the [Car Settings] button Press [Door Lock Sound]Easy Seat AccessPress the [Car Settings] button Press [Easy Seat Access]Turning on this option will automatically move the driver-side seat when the ignition is turned off and re-position it when the ignition is turned on again.Key Activated AlarmPress the [Car Settings] button Press [Key Activated Alarm]Turning on this option will activate the car alarm when the vehicle is locked by either the remote key or the actual key. .](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-135.png)
![Part 6. INFOVoice RecognitionPress [System Settings Press [Voice Recognition]This option enables you to set Voice Recognition mode to either Normal or Expert mode.Name Description12123Name Description1. Image Display screen as image2. Find Image Used to select a differentimage3. None Turns Frame offInformation• If the language is set to English or another language, then voice recognition may not be supported.This option is used to change the language of the system display. It is possible to set to Korean, English, and other languages.LanguagePress [System Settings] Press [Language] Setting Power Off Setting (Frame Image)Press [System Settings] Press [Power Off Settings]System Setting](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-136.png)
![Part 6. INFOName Description1. ABC Keyboard with characters arranged in order2. QWERTYKeyboard similar to the one used within a computer12System UpdatePress [System Settings] Press [System Update]This option provides Help sections for key features found within the system.HelpPress [System Settings] Press [Help]Interactive GuidePress [System Settings] Press [Interactive Guide]This option is used to turn on the Interactive Guide that provides explanations and simple examples of ways to use the Controller.KeyboardPress [System Settings] Press [Keyboard]This option allows you to change the typeof keyboard used within the system.InformationThe set keyboard will be applied to allinput modes across the entire system.](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-137.png)
![Part 6. INFO123Fader/BalancePress [Sound Settings] Press [Fader/Balance]Use the top/down/left/right buttons on the [ ] to move the cursor on the control screen to the desired position.Press and hold the [ ] for approx 3 seconds to restore sound to the center position.Sound SettingsInformationThe Balance/Fader settings allow the position of the sound to be set. For example, the sound can be set towards the driver seat so that the volume relatively lower in the passenger seat or back seats.Use the [<] or [>] cursors to adjust the bass/mid/treble settings.Press and hold the controller for approx 3 seconds to restore all settings back to 0.Treble/Middle/BassPress [Sound Settings] Press [Treble/Middle/Bass]Variable EQPress [Sound Settings] Press [Variable EQ]Information• This product requires regular updatesfor software corrections, new functionsand map updates. Updating mayrequire up to 1 hour depending on thedata size.• Turning off the power or ejecting the SD card during the update process mayresult in data loss. Make sure to keepthe ignition on and wait until updating iscomplete.• For up-to-date maps and software, visit the site (blu.hyundai.com) and download related files to an SD card.After inserting the SD card where the updated file is downloaded, press [USB Update] to start the update. Once updating is complete, the system will automatically restart.](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-138.png)
![Part 6. INFOThis option allows users to set the sound mode according to one’s preferences.Name Description1. Normal Natural sound, soundoptimized for driver2. DynamicPowerful sound,emphasizing bass, stereosound3. Concert Sound similar to a concertor live hall123Name Description1.Navigation PriorityNavigation guidance is output louder than audio volume2. Audio PriorityAudio volume is output louder than the navigation guidance3. Same RatioAudio volume and navigation guidance are output in identical volumeThe volume level is automatically controlled according to the vehicle speed.Auto Volume Control (AVC)Press [Sound Settings] Press [Auto Volume Control]Each press of this setting with turn the BEEP tone ON/OFF.Touch Beep TonePress [Sound Settings] Press [Touch Beep Tone]Volume RatioPress [Sound Settings] Press [Volume Ratio] These options are used to set the volume ratio by selecting from Navigation Priority/ Audio Priority/Same Ratio.InformationThe rear seat speaker will maintain itsaudio volume regardless of which volumeratio is selected.This option is used to restore all Sound settings back to the default state.Default SoundPress [Sound Settings] Press [Default Sound]](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-139.png)
![Part 6. INFOAdjust ScreenPress [Display Settings] Press [Brightness/Saturation/Contrast/Color]This option is used to set the screen brightness and color. Name Description1. AutomaticAdjusts the brightnessautomatically according tosurrounding brightness2. Daylight Always maintains thebrightness on high3. Night Always maintains thebrightness on low123LCD BrightnessPress [Display Settings] Press [LCD Brightness]This option is used to change the LCD brightness. Press and hold the [ ] for approx 3 seconds to restore brightness to the default settingDisplay Settings IlluminationPress [Display Settings] Press [Illumination]InformationWhen set to Automatic, the screen brightness and color will automatically be adjusted according to the surrounding brightness.](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-140.png)
![Part 6. INFOName Description1. Normal (4:3) 4:3 screen display2. Wide (16:9) 16:9 wide screen display3. Full Screen Full screen displayThis option is used to set the screen ratio in video modes, such as VCD/DVD/USB Video/AUX.RatioPress [Display Settings] Press [Ratio]InformationIf a DVD is created with a defined ratio(example: 16:9), the screen will notchange even if a different screen ratio(example: Normal) is selected.This option is used to restore all Display settings back to the default state.Default DisplayPress [Display Settings] Press [Default Display]](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-141.png)
![9-17APPENDIXM & SOFT AMERICA MAP CENTERTEL : 888-757-0010WEBSITE : www.mapnsoft.comMAP DATABASE HOTLINEThis equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ˍ Reorient or relocate the receiving antenna. ˍ Increase the separation between the equipment and receiver. ˍ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ˍ Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may notcause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. ,&:DUQLQJ7KLVGHYLFHFRPSOLHVZLWK,QGXVWU\&DQDGDOLFHQFHH[HPSW566VWDQGDUGV2SHUDWLRQLVVXEMHFWWRWKHIROORZLQJWZRFRQGLWLRQVWKLVGHYLFHPD\QRWFDXVHLQWHUIHUHQFHDQGWKLVGHYLFHPXVWDFFHSWDQ\LQWHUIHUHQFHLQFOXGLQJLQWHUIHUHQFHWKDWPD\FDXVHXQGHVLUHGRSHUDWLRQRIWKHGHYLFH/HSUpVHQWDSSDUHLOHVWFRQIRUPHDX[&15G,QGXVWULH&DQDGDDSSOLFDEOHVDX[DSSDUHLOVUDGLRH[HPSWVGHOLFHQFH/H[SORLWDWLRQHVWDXWRULVpHDX[GHX[FRQGLWLRQVVXLYDQWHVODSSDUHLOQHGRLWSDVSURGXLUHGHEURXLOODJHHWOXWLOLVDWHXUGHODSSDUHLOGRLWDFFHSWHUWRXWEURXLOODJHUDGLRpOHFWULTXHVXELPrPHVLOHEURXLOODJHHVWVXVFHSWLEOHGHQFRPSURPHWWUHOHIRQFWLRQQHPHQW7KLVHTXLSPHQWFRPSOLHVZLWK)&&UDGLDWLRQH[SRVXUHOLPLWVVHWIRUWKIRUDQXQFRQWUROOHGHQYLURQPHQW7KLVHTXLSPHQWVKRXOGEHLQVWDOOHGDQGRSHUDWHGZLWKPLQLPXPFPEHWZHHQWKHUDGLDWRUDQG\RXUERG\7KLVWUDQVPLWWHUPXVWQRWEHFROORFDWHGRURSHUDWLQJLQFRQMXQFWLRQZLWKDQ\RWKHUDQWHQQDRUWUDQVPLWWHUXQOHVVDXWKRUL]HGWRGRVRE\WKH)&&](https://usermanual.wiki/HYUNDAI-MOBIS/AN340EPAN/User-Guide-1640900-Page-142.png)