HYUNDAI MOBIS ADCA0J5AN Car Audio System User Manual

HYUNDAI MOBIS CO., LTD. Car Audio System Users Manual

Users Manual

CAR MULTIMEDIA SYSTEM USER'S MANUAL2016-11-18 오후 3:27:412016-11-18 오후 3:27:4
Read the following safety precautions for your safetyBefore using the product, read the contents of this user's manual carefully and use this product safely.※ The design and specifi cations of this product may change without prior notifi cation for product and service improvement.The actual features in the vehicle may differ from the illustrations.For more accurate information about the vehicle, please refer to the catalogue.※ This Audio system contains open source software, including without limitation, software distributed and/or modifi ed under the GNU General Public license, Version 2, June 1991, and the GNU lesser General Public License, Version 2.1, February 1999. For additional information and to obtain related materials including without limitation, the previous referred to licenses and software, please contact us at MOBIS_OSSrequest@mobis.co.krNotations used within this User's Manual WARNING• Failure to observe the instructions within this category could result in death or serious injury or damage to the vehicle. CAUTION• Information on matters that could potentially lead to injury or vehicle damage/malfunction Information that could lead to higher user safetyi Information• Information and tips that provide additional user convenience in using the product NOTICE• Information on specific features that facilitate proper product use and functional understanding• Information on terminology used within this manualK_SC 17_DAUD2[MEX_EG]AV_PART0.indd 1K_SC 17_DAUD2[MEX_EG]AV_PART0.indd 1 2016-11-18 오후 3:28:122016-11-18 오후 3:28:1
iPod®iPod® is a registered trademark of Apple Inc.Bluetooth® Wireless TechnologyThe Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Kia is under license.Other trademarks and trade names are those of their respective owners.A Bluetooth® Wireless Technology enabled cell phone is required to use Bluetooth® Wireless Technology.K_SC 17_DAUD2[MEX_EG]AV_PART0.indd 4K_SC 17_DAUD2[MEX_EG]AV_PART0.indd 4 2016-11-18 오후 3:28:152016-11-18 오후 3:28:1
Warnings and CautionsKey Product FeaturesComponent Names and FunctionsStarting the System for the First Timepart.1 BasicK_SC 17_DAUD2[MEX_EG]AV_PART1.indd 1-1K_SC 17_DAUD2[MEX_EG]AV_PART1.indd 1-1 2016-11-18 오후 3:28:252016-11-18 오후 3:28:2
1-2 I Basic Safety Warnings • Do not stare at the screen while driving. Staring at the screen for prolonged peri-ods of time could lead to traffic accidents.• Do not disassemble, assemble, or modify the Multimedia system. Such acts could result in accidents, fire, or electric shock.• Heed caution not to spill water or intro-duce foreign objects into the device. Such acts could lead to smoke, fire, or product malfunction.• If you use phone related functions while driving, you will find it difficult to concen-trate on operating the vehicle and the current traffic conditions, so the possibility of an accident may increase. Please use phone related functions only when parked.• Please refrain from use if the screen is blank or no sound can be heard as these signs may indicate product mal-function. Continued use in such con-ditions could lead to accidents (fires, electric shock) or product malfunctions.• Do not touch the antenna during thun-der or lightening as such acts may lead to lightning induced electric shock.• Do not stop or park in parking-restricted areas to operate the product. Such acts could lead to traffic accidents.• For most Audio and multimedia modes, the display will not operate when the vehicle is in motion. For your safety, first park the vehicle to watch or view the screen. (The screen will only operate when the parking brake is ON for man-ual transmission vehicles and when the parking brake is ON or the gearshift is in the P (PARK) position for automatic.)• Some functions other than the one mentioned above cannot be used while driving. These functions operate only when the vehicle is parked. BasicK_SC 17_DAUD2[MEX_EG]AV_PART1.indd 1-2K_SC 17_DAUD2[MEX_EG]AV_PART1.indd 1-2 2016-11-18 오후 3:28:272016-11-18 오후 3:28:2
Warnings and Cautions I 1-301 Safety Cautions Pay attention to traffic conditions while driving. • Operating the device while driving could lead to accidents due to a lack of atten-tion to external surroundings. First park the vehicle before operating the device. In addition, the touch screen may not work for some functions when the vehi-cle is in motion. The touch screen fea-ture will be supported once the vehicle has stopped.• Adjust the volume to levels that allow the driver to hear sounds from outside of the vehicle. Driving in a state where external sounds cannot be heard may lead to accidents.• Pay attention to the volume setting when turning the device on. A sudden output of extreme volume upon turning the device on could lead to hearing impair-ment. (Adjust the volume to a suitable levels before turning off the device.)• If you want to change the position of device installation, please inquire with your place of purchase or service main-tenance center. Technical expertise is required to install or disassemble the device.• Turn on the car ignition before using this device. Do not operate the Multimedia system for long periods of time with the ignition turned off as such operations may lead to battery discharge.• Upon using the Multimedia system for more than 10 minutes with the car engine turned off, the following warning will be displayed. After 10 minutes, the warning will be displayed for 5 seconds every 1 minute.• Do not subject the device to severe shock or impact. Direct pressure onto the front side of the monitor may cause damage to the LCD or touch screen.• When cleaning the device, make sure to turn off the device and use a dry and smooth cloth. Never use tough materi-als, chemical cloths, or solvents(alcohol, benzene, thinners, etc.) as such mate-rials may damage the device panel or cause color/quality deterioration. When experiencing product concerns, inquire with your place of purchase or service maintenance center.• Prevent caustic solutions such as per-fume and cosmetic oil from contacting the dashboard because they may cause damage or discoloration.K_SC 17_DAUD2[MEX_EG]AV_PART1.indd 1-3K_SC 17_DAUD2[MEX_EG]AV_PART1.indd 1-3 2016-11-18 오후 3:28:272016-11-18 오후 3:28:2
1-4 I BasicKey Product FeaturesThis device is a Multimedia system equipped with a multifunc-tional player that supports Radio (FM, AM), USB, iPod, AUX and Bluetooth Audio features. The WIDE VGA LCD provides a high quality resolution while the powerful and rich sound system adds to the driving enjoyment.DisplayWide TFT-LCD Display• Provides high quality video through a Wide TFT-LCD Display using an LED Back Light.• Touch screen for maximum user convenience.RadioDigital Tuner Feature• Digital Tuner using PLL method that supports memory of 40 broadcast stations.Radio broadcast station name• Displays broadcast station names.MultimediaPlayerSupport for various Media Formats• Support for various media formats, including Radio, USB, iPod, AUX and Bluetooth® Audio Streaming modes. MiscellaneousBluetooth® Wireless Technology• Convenient use of Bluetooth® Handsfree by using buttons within the steering wheel controlDigital Screen Control Features• Easy control of features through touch screen optionsSteering Wheel Control• Control over audio features, Bluetooth® through the steering wheel control for maximum conve-nience.K_SC 17_DAUD2[MEX_EG]AV_PART1.indd 1-4K_SC 17_DAUD2[MEX_EG]AV_PART1.indd 1-4 2016-11-18 오후 3:28:282016-11-18 오후 3:28:2
Component Names and Functions I 1-501Component Names and FunctionsHead UnitName DescriptionRADIOConverts to FM/AM mode• Each time the key is pressed, the mode ischanged in the following order: FM1 → FM2 →AM → FM1.MEDIAMoves to MEDIA mode.• If the media is not connected MEDIA mode willnot be activated.TRACKSEEKWhen the key is pressed shortly (for less than 0.8 seconds),• FM/AM mode: Plays the previous/next fre-quency.• MEDIA (USB/iPod) mode: Changes the track,file or title (except for AUX).When the key is pressed and held down (for over 0.8 seconds),• FM/AM mode: Continuously changes the fre-quency until the key is released.• MEDIA (USB/iPod) mode: Rewinds or fastforwards the track or file (except for BluetoothAudio, and AUX). POWER/VOL • When power is off, press to turn power on.• When power is on, press and hold for over 0.8seconds to turn the power off.• When power is on, press shortly for less than 0.8 seconds to turn Audio off.• Turn left/right to adjust the volume.K_SC 17_DAUD2[MEX_EG]AV_PART1.indd 1-5K_SC 17_DAUD2[MEX_EG]AV_PART1.indd 1-5 2016-11-18 오후 3:28:282016-11-18 오후 3:28:2Name DescriptionHOMEDisplays the HOME screen.PHONEDisplays the Bluetooth phone mode.Displays the function set by the user.SETUPMoves to the Setup screen. TUNE• FM/AM mode: Changes the frequency.• MEDIA (USB/iPod) mode: Changes the track,file or title (except for Bluetooth Audio, andAUX).RESET Resets the system settings. (Preset radio channels and other data will not be deleted)※ The actual feature in the vehicle may differ from the illustration.
Component Names and Functions I 1-701Name DescriptionFor more details, refer to Phone Projection guide.MODE• Each time this key is pressed, mode is changedin the following order: FM1 → FM2 → AM → USBor iPod → AUX → Bluetooth Audio → FM1• If the media is not connected, the correspondingmodes will be disabled• Press and hold the key (more than 0.8 seconds)to turn the Audio system on/off• When power is off, press the key to turn powerback onVOL +VOL -Controls the volumeWhen keys are pressed quickly. (less than 0.8 seconds)• FM/AM mode: searches broadcast frequenciessaved to Presets• Media (USB/iPod) mode: changes the track, fileor title (except for AUX)When keys are pressed and held. (more than 0.8 seconds)• FM/AM mode: automatically searches broadcastfrequencies• Media (USB/iPod) mode: quickly looks up songs(excluding AUX and Bluetooth audio files)Steering Wheel ControlK_SC 17_DAUD2[MEX_EG]AV_PART1.indd 1-7K_SC 17_DAUD2[MEX_EG]AV_PART1.indd 1-7 2016-11-18 오후 3:28:492016-11-18 오후 3:28:4Name DescriptionWhen pressed quickly. (less than 0.8 seconds)• When pressed in the dial screen, makes a call• When pressed in the incoming call screen,answers the call• When pressed during call waiting, switches towaiting call (Call Waiting)When pressed and held. (more than 0.8 seconds)• When pressed in Bluetooth® Hands-free, redialsthe last dialed call• When pressed during a Bluetooth® Hands-freecall, switches call back to mobile phone (Private)• When pressed while calling on the mobile phone,switches call back to Bluetooth® Hands-free (operates only when Bluetooth® Hands-free is connected)• When pressed during a call, ends the phone call• When pressed in the incoming call screen, rejectsthe call※ The actual feature in the vehicle may differ from the illustration.
Starting the System for the First Time I 1-901Starting the System for the First TimeTurning the System On/OffPress the engine start button or set the ignition key to On or ACC. Each time you turn on the system, a boot logo and safety warning will appear.Pressing the power key on the head unit will display the safety guide. To change the system language select the Language button. NOTICE•Cannot operate the system while it isbooting up. It may take some time for all offeatures of the system.Pressing and holding the power key on the head unit will turn off the system. You can change Screen Saver Settings in Setup to display a clock on the Screen Saver.i Information• If you turn off the system during a phonecall using the Hands-free feature, then thecall will automatically switch to your mobilephone. NOTICE• Check the volume when turning on thesystem. Before turning on the system, adjustthe volume to a reasonable level.System ResetThe System Reset function restores the system when it is not operating correctly. Press and hold the RESET key for a sec-ond or longer. (It is recommended that you press the RESET key using a tool, such as a pin or a clip.)K_SC 17_DAUD2[MEX_EG]AV_PART1.indd 1-9K_SC 17_DAUD2[MEX_EG]AV_PART1.indd 1-9 2016-11-18 오후 3:29:432016-11-18 오후 3:29:4
1-10 I BasicBattery Warning MessageAlways use the system while the car engine is running. If you turn on the sys-tem while the engine is off, a battery warn-ing message will appear. When the engine starts, the message will disappear. NOTICE• If you use the system for a long time with the engine off, the battery may become completely discharged.Restrictions on Features for Safety MeasuresSeveral features are limited while driving.The restriction screen will disappear when shifting gears into P or putting the parkingbrake on.K_SC 17_DAUD2[MEX_EG]AV_PART1.indd 1-10K_SC 17_DAUD2[MEX_EG]AV_PART1.indd 1-10 2016-11-18 오후 3:29:472016-11-18 오후 3:29:4
Starting the System for the First Time I 1-1101Home ScreenControls Menu Confi guration for the Home ScreenTap the icon on any screen to display the Home Screen below.Features Description Radio/Media Widget• Shows brief information on the radio or media that is now playing.• Tap the area to move to the mode that you are listening to.• Shows call-related information during a phone call. Connectivity Widget Shows any connected devices such as iPod and Bluetooth. All Menus Shows all of the items in the system menu. My Menu Add your favorite menus to have quick and easy access to them. Apps/Info Moves to the Apps/Info screen. Setup Moves to the Setup screen.Information Display on the Status BarDisplays the date and time, along with the system status shown by the various icons to the right of the clock. The icons in the following table indicate the various types of sys-tem status details and events.Icon DescriptionDisplayed when the audio is muted.Displays the remaining battery of the Bluetooth phone.Displayed when connected to Bluetooth for handsfree.Displayed when connected to Bluetooth for streaming audio.Displayed when connected to Bluetooth for streaming audio and handsfree.Displayed when downloading contacts or recent calls from the Bluetooth phone.Displayed while on a call with the Bluetooth phone.Displayed when the microphone of the Bluetooth phone is muted.Displays the signal strength of the Bluetooth phone.K_SC 17_DAUD2[MEX_EG]AV_PART1.indd 1-11K_SC 17_DAUD2[MEX_EG]AV_PART1.indd 1-11 2016-11-18 오후 3:29:482016-11-18 오후 3:29:4
1-12 I BasicAdding a Feature to My MenuSelect My Menu on the Home Screen to add the most frequently used menus, change the menu order, or delete menus.i Information • Up to 24 menus can be added to My Menu.On-Screen Touch ControlsLearn how to touch the screen to operate the system. SelectTap lightly on a menu or an item to select it. NOTICE• The system will not recognize your touch if you wear a glove or other non-conductive material. Touch the screen using your fi nger, an electrostatic touch-screen glove, or a stylus pen.Drag & DropSelect a menu or item you want, then drag and drop it to where you want to place it.Drag or touch the slider along the play bar in the music screens to jump to the point that you want to play from. K_SC 17_DAUD2[MEX_EG]AV_PART1.indd 1-12K_SC 17_DAUD2[MEX_EG]AV_PART1.indd 1-12 2016-11-18 오후 3:29:552016-11-18 오후 3:29:5
Starting the System for the First Time I 1-1301Flick (Quick Scrolling)Quickly moves up and down in the list. NOTICE• Moving the list when there are many itemswill display a handler on the right of thedisplay. You can easily move many items ata time with the handler.Press and HoldPressing the and buttons in the music player will fast forward/rewind the music.K_SC 17_DAUD2[MEX_EG]AV_PART1.indd 1-13K_SC 17_DAUD2[MEX_EG]AV_PART1.indd 1-13 2016-11-18 오후 3:29:562016-11-18 오후 3:29:5
Warning StatementK_SC 17_DAUD2[MEX_EG]AV_PART1.indd 1-14K_SC 17_DAUD2[MEX_EG]AV_PART1.indd 1-14 2016-11-18 오후 3:29:592016-11-18 오후 3:29:5FCC Part 15.19 Statements: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.FCC Part 15.105 statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:- Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help.FCC Part 15.21 statementAny changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.RF Exposure Statement (MPE) The antenna(s) must be installed such that a minimum separation distance of at least 20 cm ismaintained between the radiator (antenna) and all persons at all times. This device must not be co-located or operating in conjunction with any other antenna or transmitter.
FM/AM USB iPodAUXBluetooth® Audiopart.2 Radio/MediaK_SC 17_DAUD2[MEX_EG]AV_PART2.indd 2-1K_SC 17_DAUD2[MEX_EG]AV_PART2.indd 2-1 2016-11-18 오후 3:30:152016-11-18 오후 3:30:1
2-2 I Radio/MediaRadio/MediaFM/AMYou can access the radio player either by pressing the RADIO key or by selecting the Radio menu from All Menus on the Home screen.FM/AM Mode Display Controlsi Information• If you press the RADIO key when the power is off, the power will turnon and a radio broadcast will be tuned from the current mode.Features Description Mode Display Displays the current operating mode. Preset Frequencies•The stored preset frequencies are displayedfor user selection.• After selecting frequency, press and holdthe preset button for over 0.8 seconds.A beep sound will be heard and the frequency is to be stored in the selected preset button.• Flick the preset frequencies up/down toscroll quickly through presets. Frequency Displays the current frequency. Menu • Sound SettingsMoves to the Sound Settings. Back Button Converts to basic mode screen. Scan/ Preset ScanDisplays an active mode from Scan and Preset Scan modes. Scan Shortly plays the broadcasts for the frequencies with superior reception for 5 seconds per item. AutostoreSaves frequencies with good reception to Preset buttons. While Autostore is operating, pressing the Autostore button again will cancel the func-tion and play the previous frequency. K_SC 17_DAUD2[MEX_EG]AV_PART2.indd 2-2K_SC 17_DAUD2[MEX_EG]AV_PART2.indd 2-2 2016-11-18 오후 3:30:172016-11-18 오후 3:30:1
FM/AM I 2-302Features Description SEEK/TRACK• Pressing this button briefly (less than 0.8 sec-onds): Seeks the previous/next frequency.• Pressing and holding this button (for morethan 0.8 seconds): Moves quickly throughall of the frequencies. The moment that yourelease the button, the system seeks the nextavailable frequency. TUNETurn the TUNE knob to manually seek avail-able frequencies.•FM: Increment/decrement by 200 kHz•AM: Increment/decrement by 10 kHzK_SC 17_DAUD2[MEX_EG]AV_PART2.indd 2-3K_SC 17_DAUD2[MEX_EG]AV_PART2.indd 2-3 2016-11-18 오후 3:30:222016-11-18 오후 3:30:2
2-4 I Radio/MediaUSBBefore Playing a USB MP3Connect the USB device after turning on the engine. The USB device may become damaged if it is already connected when the ignition is turned on.•Files that are not standard format music/image files will not beplayed.• For MP3/WMA/OGG files, only music files with compressionrates between 8Kbps ~ 320Kbps can be played.•Heed caution to static electricity when connecting/disconnectingexternal USB devices.• Encoded MP3 Players will not be recognized when connectedas an external device.•When connecting an external USB device, the device may notproperly recognize the USB is in some states.•Only products formatted with byte/sectors under 64Kbyte will berecognized.•USB devices, formatted to the FAT12, FAT16, or FAT32 file sys-tem, are recommended. File systems other than FAT12, FAT16,FAT32, exFAT, and NTFS are not supported.•Some USB devices may not be supported due to compatibilityissues.•Take caution so that the USB connector does not come in con-tact with body parts or objects.•Repeated connecting/disconnecting of USB devices within shortperiods of time may result in product malfunction.•Make sure to connect/disconnect external USB devices with theaudio power turned off.• The amount of time required to recognize the external USBdevice may differ depending on the type, size, or file formatsstored on the USB.•The use of USB devices for purposes other than playing musicand image files is prohibited. •Do not use the USB I/F to charge batteries or USB accessoriesthat generate heat. Such acts may lead to worsened perfor-mance or damage to the device.• The device may not recognize the USB device if separatelypurchased USB hubs and extension cables are being used.Connect the USB directly with the multimedia terminal of thevehicle.• When using mass storage USB devices with separate logicaldrives, only files saved to the root drive can be played.•When application programs are installed to specific USBs, filesmay not properly play.K_SC 17_DAUD2[MEX_EG]AV_PART2.indd 2-4K_SC 17_DAUD2[MEX_EG]AV_PART2.indd 2-4 2016-11-18 오후 3:30:272016-11-18 오후 3:30:2
USB I 2-502• The device may not operate normally if MP3 Players, cellu-lar phones, digital cameras, or other electronic devices (USB devices not recognized as portable disk drives) are connected with the device.• Charging through the USB may not work for some mobile devices.• The device may not support normal operation when using a USB memory type besides Metal Cover Type USB Memory.• The device may not support normal operation when using for-mats such as HDD Type, CF, or SD Memory.• Upon playing iPods, please use a dedicated iPod car cable. • Normal operations cannot be guaranteed when other cables are being used.• The device will not support files locked by DRM. (Digital Rights Management)• USB memory sticks used by connecting an Adaptor (SD Type or CF Type) may not be properly recognized.• Only use Plug type connector products, as shown in the figure below.• To play USB MP3, the USB device must be connected to the USB port in the front multibox. The USB port in the center con-sole storage (if equipped) is for charging only. Product Name Manufacturer XTICK LG BMK BMK Technology SKY-DRV Sky Digital TRANSCEND JetFlash Transcend Sandisk Cruzer SanDisk Micro ZyRUS ZyRUS NEXTIK Digiworks i Information• Problems that occur through use of USB devices not listed within the above table are not covered by the product warranty.Plug Type ConnectorK_SC 17_DAUD2[MEX_EG]AV_PART2.indd 2-5K_SC 17_DAUD2[MEX_EG]AV_PART2.indd 2-5 2016-11-18 오후 3:30:272016-11-18 오후 3:30:2
2-6 I Radio/MediaSupported USB MP3 music specifi cationsName DescriptionMP3 File Specification Specification: MPEG1 AUDIO LAYER 3Recommended Bit Rates and Sampling FrequencyAcceptable sampling frequency: 32, 44.1, 48 (kHz)Acceptable bit rate: 32, 40, 48, 56, 64, 80, 96, 112, 128, 160, 192, 224, 256, 320 (Kbps)96, 128, 192 Kbps fixed bit rate/44.1kHzID3 Tag Supports ID3v1.0 and ID3v1.1, ID3v2.2, ID3v2.3, ID3v2.4 ID3 tagsDetailed Specifications Maximum directory layers: 20 layersMaximum length of folder name/file name: 255BytesSupported characters for folder name/file name: Alphanumeric characters, Korean standard charac-ter set 2,350 characters, Simplified Chinese 4888 charactersMaximum number of folders which can be stored onto one USB: 2000 folders (including ROOT) Maximum number of files which can be stored ontoone USB: 8000i Information• The sound quality of MP3 files that use bitrates exceeding 192 Kbps cannot be guaranteed. When using files without fixed bit rates, some features (FF/REW features) may not properly operate.K_SC 17_DAUD2[MEX_EG]AV_PART2.indd 2-6K_SC 17_DAUD2[MEX_EG]AV_PART2.indd 2-6 2016-11-18 오후 3:30:362016-11-18 오후 3:30:3
USB I 2-702USB Music Mode Display ControlsFeatures Description Mode Displays current operating mode File Index Shows the current file/total files within the USB Repeat/Shuffle From Repeat/Shuffle, displays the current oper-ating function Play Time Displays the current play time/total play time Song InfoDisplays the information of the current track• When a track in the file tab on the list screen is selected: Displays artist, title, album info• When a track in the other tabs on the list screen is selected: Displays artist, title, album info List Moves to the list screen Back Button Converts to basic mode screenFeatures Description Previous FileIf button is pressed (less than 0.8 seconds): Moves to the previous file or play the current file from the beginning (Depends on the play time)• If play time is less than 3 seconds, moves to previous file• If play time is more than 3 seconds, play the current file from the beginningIf button is pressed (more than 0.8 seconds): It rewinds the track Play/Pause Plays/pauses the current file Next File• If button is pressed (less than 0.8 seconds): Moves to the next file• If button is pressed (more than 0.8 seconds): It fast-forwards the track RepeatRepeats the current file• If select the song in the file tab on the list screen: Select the Repeat button to switch between repeating one song, repeating folder, and turning repeat off• If select the song in the other tabs (Playlist, Artist, Song, Album) on the list screen: Select the Repeat button to switch between repeating one song and turning repeat off ShufflePlays files in random order• If select the song in the file tab on the list screen: Select the Shuffle button to switch between Shuffle Folder, Shuffle All, and turning shuffle off • If select the song in the other tabs (Playlist, Artist, Song, Album) on the list screen: Select the Shuffle button to switch between Shuffle Category and turning shuffle offK_SC 17_DAUD2[MEX_EG]AV_PART2.indd 2-7K_SC 17_DAUD2[MEX_EG]AV_PART2.indd 2-7 2016-11-18 오후 3:30:362016-11-18 오후 3:30:3
2-8 I Radio/MediaFeatures Description Menu • Delete Current File: A selected file can bedeleted. Deleted file can be found in the to_Delete folder.This function is only suppored when USB for-mat is compatable with FAT16 or FAT32.• Sound Settings: Moves to the Sound Settingsscreen. You can change the settings of thesound. TUNETurn the TUNE knob to search a desired track. If the desired track is displayed, press the TUNE knob to play the track. If you do not anything with the TUNE knob for 5 seconds of searching tracks, the track info for the current track is restored.K_SC 17_DAUD2[MEX_EG]AV_PART2.indd 2-8K_SC 17_DAUD2[MEX_EG]AV_PART2.indd 2-8 2016-11-18 오후 3:30:462016-11-18 오후 3:30:4
USB I 2-902Features Description Folder/ Category Name Displays folder/category name in the list Current Song Displays current playing file name Back Button Converts to basic mode screen Upper Folder/Category Moves to Upper Folder Menu Now Playing: When moving to a different list screen, moves to the list page where the cur-rent file is located (Becomes disabled when the current list includes the current file) Search MenuSearch tracks by the list type. Search songs according to File, Artist, Song, Album and Recently Added. If access the search menu while playing a track, it moves to the previous search mode. SEEK/TRACK•If button is pressed (less than 0.8 seconds):Plays previous/next track.• If button is pressed (more than 0.8 seconds): Moves to play screen, and then it will rewindor fast-forward the track. TUNETurn the TUNE knob to move the focus to the previous/next list. If the desired track is dis-played, press TUNE knob to play the track.K_SC 17_DAUD2[MEX_EG]AV_PART2.indd 2-9K_SC 17_DAUD2[MEX_EG]AV_PART2.indd 2-9 2016-11-18 오후 3:30:502016-11-18 오후 3:30:5
2-10 I Radio/MediaiPodUsing iPod Devices• iPod is a registered trademark of Apple Inc.• iPod mode will not operate if the con-nected iPod cannot be recognized due to operation of unsupported versions that do not support related protocols, iPod abnormalities, or iPod device defects. Some iPods with unsupported communication protocols may not prop-erly operate with the Multimedia system.• For fifth generation iPod Nano devices, the iPod may not be recognized when the battery level is low. Please charge the iPod for use. • Search/play orders shown within the iPod device may differ with the orders shown within the Multimedia system.• If the iPod malfunctions due to an iPod device defect, reset the iPod and try again. (To learn more, refer to your iPod manual)• If repeatedly connect and disconnect iPod/iPhone to the Multimedia system with USB cable in short time, it may cause abnormal operation. • The time for recognition of iPod/iPhone may vary depending on device type, firmware version and iOS version.• For some iPod Touch and iPhone devices, connecting Bluetooth® while the iPod is operating may result in discon-tinued iPod sound. When such devices with Bluetooth® support are connected, this problem occurs as the sound source is changed from the Dock Connector (USB connector cable) to Bluetooth.• To prevent this symptom, Bluetooth Audio function in the Multimedia system is limited if iPod/iPhone is connected to the system through both cable and Bluetooth. To listen to the iPod sound, use either iPod menu with USB connec-tion or Bluetooth Audio with Bluetooth connection.• To listen to the iPod sound, reconnect the USB cable or change the audio out-put settings in iPod/iPhone to Dock.• In order to use the iPod while operating the keys, you must use a dedicated iPod cable. (the cable that is supplied when purchasing iPod/ iPhone products)※ During ACC ON state, connecting the iPod through the iPod cable (The cable that is supplied when purchasing iPod/iPhone product.) will charge the iPod through the head unit.※ The use of genuine iPod cables sup- The use of genuine iPod cables sup-plied by Apple is recommended. (The plied by Apple is recommended. (The use of other products may result in use of other products may result in noise or abnormal operation.)noise or abnormal operation.)※ To play iPod music through cable con-nection, the iPod/USB cable must be connected to the USB port in the front multibox. The USB port in the center console storage (if equipped) is for charging only.K_SC 17_DAUD2[MEX_EG]AV_PART2.indd 2-10K_SC 17_DAUD2[MEX_EG]AV_PART2.indd 2-10 2016-11-18 오후 3:30:542016-11-18 오후 3:30:5
iPod I 2-1102• When connecting with the iPod cable, make sure to fully insert the jack to pre-vent communication interference. If the iPod is connected to the vehicle while it is playing, a high pitch tone may sound for about 1~2 seconds immediately after connection. If possible, connect the iPod to the vehicle with the iPod stopped/paused.• Within iPhones, streaming audio and iPod control may occasionally conflict. If problems persist, remove the iPhone and connect again.• When connecting to iPod Nano/Classic, the Kia Motor logo appears on the Apple device. For the iPod Nano 6 genera-tion, however, the logo image does not appear since it is not supported. Also, all iPhone and iPod Touch products do not support this function.• In Apple’s iOS 6.0 version or later, Podcast and Audiobook media files are designed to be played with the Podcasts and iBooks applications specifically designed for Apple products. If the Apple device does not provide the Podcast and Audiobook lists, the playlist may not be displayed and played in the iPod mode.• If the Apple Podcasts and iBooks apps are not installed on the Apple device, but the Apple device provides the Podcast and Audiobook lists, you can play files in other categories in iPod mode.• The screen of multimedia system can be different when you run other music players (e.g. iHeartRadio) on your con-nected device.K_SC 17_DAUD2[MEX_EG]AV_PART2.indd 2-11K_SC 17_DAUD2[MEX_EG]AV_PART2.indd 2-11 2016-11-18 오후 3:30:542016-11-18 오후 3:30:5
2-12 I Radio/Media Caution• While using a connected iPhone/iPod Touch device, it may not operate nor-mally if the user changed some func-tions in the device.• When calling with an iPhone connec-tion, song may stop playing due to an Apple device feature. If sound does not resume after the call is terminated, check the device status. • If lots of songs have the same informa-tion, skipping may occur when previous/next song is executed due to an Apple device feature. Also problems may occur depending on device type or iOS version.• If lots of songs have the same informa-tion, it may occur difference of playing songs between the Multimedia system and Apple device. Reset the device or delete the same songs in the Apple device using iTunes. • If you control pause, repeat, shuffle, or seek songs when the play time is when the play time is less than 3s before fin-ished playing, it may occur difference of playing song between the Multimedia system and Apple device. Access to iPod music from another mode or pause a song and then play a song again in Apple device. • We recommend that your Apple device uses the latest firmware since some problems may occur due to an outdated firmware or other software related issues. Type 1G 2G 3G 4G 5G 6G 6.5G 7GiPod Mini Not SupportediPod Shuffle Not SupportediPod Nano ○ ○○○ ○ ○ Not released ○iPod Touch ○(iOS 1.1 not supported)○○○ ○ Not releasediPad ○ (Unable to charge, Not verified, Normal working not guaranteed)iPad Mini ○ (Unable to charge, Not verified, Normal working not guaranteed)iPod Classic Not Supported ○(iPod with Video)○(iPod Classic)○(iPod Classic)Not releasedType 3G 3GS 4 4S 5 5C 5S 6 6+iPhoneNot verified, Normal working not guaranteed○○○○○○○○K_SC 17_DAUD2[MEX_EG]AV_PART2.indd 2-12K_SC 17_DAUD2[MEX_EG]AV_PART2.indd 2-12 2016-11-18 오후 3:30:542016-11-18 오후 3:30:5
iPod I 2-1302 Caution• If the iPhone/iPod Touch supports Bluetooth, it is unable to use Bluetooth Audio if the Apple device that is con-nected to the Multimedia system through both USB connection and Bluetooth. Disconnect the USB connec-tion then use Bluetooth Audio.• If iPod/iPhone connected to the Multimedia system through both USB and AUX. iPod/iPhone keeps output sound via AUX, thus it may occur sound will not output in iPod mode.• If AUX cable connected to iPod/iPhone but not connect to the Multimedia sys-tem, it may occur sound will not output in iPod mode due to iPod/iPhone’s fea-ture. Especially, if you use AUX cable like pictures, this problem may occur. • Disconnect AUX cable from iPod/iPhone first, then connect to the Multimedia system via USB. Or change settings to “Dock” in iPod/iPhone.• If connect to the Multimedia system while podcast or iTunes music down-loading to iPod/iPhone, it may occur some problems when you select song in the list. Reconnect iPod/iPhone to the Multimedia system when downloading is finished or the file deleted.• If connect to the Multimedia system while sync, it may occur some problems. Try to use iPod/iPhone connection after sync complete. (To learn more, refer to your iPod manual)• iPhone and iPod Touch devices are guaranteed to work normally on iOS 9.3.2 or below. However, they may not work normally on future iOS versions as their operations have not yet been tested.K_SC 17_DAUD2[MEX_EG]AV_PART2.indd 2-13K_SC 17_DAUD2[MEX_EG]AV_PART2.indd 2-13 2016-11-18 오후 3:30:552016-11-18 오후 3:30:5
2-14 I Radio/MediaiPod Mode Display ControlsFeatures Description Mode Displays current operating mode Song Index Shows the current song/total songs Repeat/Shuffle From Repeat/Shuffle, displays the current operating function Play Time Displays the current play time/total play time Song Info Displays the artist/song title/album info List Moves to the list screenFeatures Description Previous FileIf button is pressed (less than 0.8 seconds): Moves to the previous file or play the current file from the beginning (Depends on the play time)• If play time is less than 3 seconds, moves to previous file• If play time is more than 3 seconds, play the current file from the beginningIf button is pressed (more than 0.8 seconds): It rewinds the track Play/Pause Plays/pauses the current file Next File• If button is pressed (less than 0.8 seconds): Moves to the next file• If button is pressed (more than 0.8 seconds): It fast-forwards the track Repeat Repeats the current fileSelect the Repeat button to switch between repeating 1 track, and turning repeat off ShufflePlays files in random orderWhen selecting Shuffle button, it changes to shuffle category → deactivate shuffle then repeat• Shuffle Category: Shuffle song in the current category Back Button Move to home/previous mode screen MenuSound Settings: Moves to the Sound Settings screen. You can change the settings of the sound.K_SC 17_DAUD2[MEX_EG]AV_PART2.indd 2-14K_SC 17_DAUD2[MEX_EG]AV_PART2.indd 2-14 2016-11-18 오후 3:30:552016-11-18 오후 3:30:5
iPod I 2-1502Features Description TUNETurn the TUNE knob to search a desired track. If the desired track is displayed, press the TUNE knob to play the track. If you do not anything with the TUNE knob for 5 seconds of searching tracks, the track info for the current track is restored.K_SC 17_DAUD2[MEX_EG]AV_PART2.indd 2-15K_SC 17_DAUD2[MEX_EG]AV_PART2.indd 2-15 2016-11-18 오후 3:31:002016-11-18 오후 3:31:0
2-16 I Radio/MediaFeatures Description Category Name Displays the category name Category ListDisplays the contents of selected category If there are many items in the list, items are added in order and the scroll bar on the right is adjusted accordingly. Back Button Converts to basic mode screen Upper Category Moves to Upper Category Search MenuSearch tracks by the list type. Search songs according to Playlist, Artist, Song, Album, Genre, Composer, Podcast and Audiobook. If access the search menu while playing a track, it moves to the previous search mode. SEEK/TRACK•If button is pressed (less than 0.8 seconds):Plays previous/next track.•If button is pressed (more than 0.8 seconds): Moves to play screen, and then it will rewindor fast-forward the track. TUNETurn the TUNE knob to search a desired track. If the desired track is displayed, press the TUNE knob to play the track.If you do not anything with the knob for 5 seconds, the TUNE knob search will be terminated.K_SC 17_DAUD2[MEX_EG]AV_PART2.indd 2-16K_SC 17_DAUD2[MEX_EG]AV_PART2.indd 2-16 2016-11-18 오후 3:31:032016-11-18 오후 3:31:0
AUX I 2-1702AUXConnecting an External DeviceIf an external device connector is con-nected with the AUX terminal, then AUX mode will automatically operate. Once the connector is disconnected, the previous mode will be restored.• AUX mode can be used only when an external audio player has been con-nected.• The AUX volume can also be controlled separately through the connected device. NOTICE• If only a cable is connected to the AUX without an external device, the mode will be changed to AUX, but noise may occur. When an external device is not being used, remove the connector jack.• When the external device power is connected to the power jack, playing the external device may output noise. In such cases, disconnect the power connection before use.※ The actual feature in the vehicle may differ from the illustration.K_SC 17_DAUD2[MEX_EG]AV_PART2.indd 2-17K_SC 17_DAUD2[MEX_EG]AV_PART2.indd 2-17 2016-11-18 오후 3:31:072016-11-18 오후 3:31:0
2-18 I Radio/MediaBluetooth® AudioBluetooth Audio Mode Display ControlsFeatures Description Mode Displays the current operating mode Phone Name Displays name of connected phone Features Description Artist Info Name of current artist Title Name of current song Previous File•If play time is less than 3 seconds, moves tothe previous file• If play time is over than 3 seconds, plays thecurrent file from the beginning This function may differ depending on themodel of mobile phone Play/Pause Plays/Pauses Bluetooth Audio Next File Moves to the next file RepeatRepeats the current file. This function may differ depending on the model of mobile phone. ShufflePlays files in random order. This function may differ depending on the model of mobile phone. Menu•Connections: Moves to the Bluetooth Settingsscreen. You can pair a new device or change/delete paired device(s).•Sound Settings: Moves to the Sound Settingsscreen. You can change the settings of thesound. SEEK/TRACK Plays the previous/next file TUNE TUNE is not supported. i Information•Artist info and Title may not be supported by mobile phone.K_SC 17_DAUD2[MEX_EG]AV_PART2.indd 2-18K_SC 17_DAUD2[MEX_EG]AV_PART2.indd 2-18 2016-11-18 오후 3:31:102016-11-18 오후 3:31:1
Bluetooth® Audio I 2-1902Bluetooth Connection SettingsSettings for pairing, connection and dis-connection of a Bluetooth device.• In Bluetooth Audio play screen, select Menu and then Connections.i Information• If the music in the mobile phone is not played after changing to audio streaming mode, press the play button. Thus check if the music is playing in the Bluetooth device after changing to audio streaming mode. Audio streaming may not be supported for some mobile phones. K_SC 17_DAUD2[MEX_EG]AV_PART2.indd 2-19K_SC 17_DAUD2[MEX_EG]AV_PART2.indd 2-19 2016-11-18 오후 3:31:182016-11-18 오후 3:31:1
MEMOK_SC 17_DAUD2[MEX_EG]AV_PART2.indd 2-20K_SC 17_DAUD2[MEX_EG]AV_PART2.indd 2-20 2016-11-18 오후 3:31:192016-11-18 오후 3:31:1
Before Using the Bluetooth® HandsfreeBluetooth ConnectionBluetooth Phonepart.3 BluetoothK_SC 17_DAUD2[MEX_EG]AV_PART3.indd 3-1K_SC 17_DAUD2[MEX_EG]AV_PART3.indd 3-1 2016-11-18 오후 3:31:522016-11-18 오후 3:31:5
3-2 I BluetoothBefore Using the Bluetooth® HandsfreeWhat is Bluetooth® Wireless Technology?• Bluetooth® Wireless Technology refers to a short-distance wireless networking technology which uses a 2.45GHz fre-quency to connect various devices within a certain distance.• Supported within PCs, external devices, Bluetooth® phones, PDAs, various elec-tronic devices, and automotive environ-ments, Bluetooth® Wireless Technology to be transmitted at high speeds without having to use a connector cable.• Bluetooth® Handsfree refers to a device which allows the user to conveniently make phone calls with Bluetooth® mobile phones through the Multimedia system.• The Bluetooth® Handsfree feature may not be supported in some mobile phones. WARNING- Distracted Driving• Focus on the road while driving. The driver's primary responsibility is in the safe and legal operation of the vehicle. Drivers should not use any hand held devices or other equipment or vehicle systems that distract the driver during vehicle operation.• Do not stare at the multimedia screen for long periods of time while driving. Staring at the screen for prolonged periods of time can lead to traffi c accidents and can result in personal injuries.Precautions for Safe Driving• Bluetooth® is a feature that enables driv-ers to practice safe driving. Connecting the head unit with a Bluetooth® phone allows the user to conveniently make calls, receive calls, and manage the phonebook. Before using Bluetooth® Wireless Technology, carefully read the contents of this user’s manual.• Excessive use or operations while driv-ing may lead to negligent driving prac-tices and be the cause of accidents. Do not operate the device excessively while driving.• • Viewing the screen for prolonged peri-Viewing the screen for prolonged peri-ods of time is dangerous and may lead ods of time is dangerous and may lead to accidents. When driving, view the to accidents. When driving, view the screen only for short periods of time.screen only for short periods of time.BluetoothK_SC 17_DAUD2[MEX_EG]AV_PART3.indd 3-2K_SC 17_DAUD2[MEX_EG]AV_PART3.indd 3-2 2016-11-18 오후 3:31:582016-11-18 오후 3:31:5
Before Using the Bluetooth® Handsfree I 3-303CAUTIONS upon Connecting Bluetooth® Phone• Before connecting the head unit with the mobile phone, check to see that the mobile phone supports Bluetooth® fea-tures.• Even if the phone supports Bluetooth® Wireless Technology, the phone will not be found during device searches if the phone has been set to hidden state or the Bluetooth® power is turned off. Disable the hidden state or turn on the Bluetooth® power prior to searching/connecting with the head unit.• If Auto Connection is used, the Bluetooth® phone is automatically connected when the ignition is turned on, making it unnec-essary to have to connect the phone with the head unit every time.• If you do not want automatic connection with your Bluetooth® device, turn the Bluetooth® feature off of the Bluetooth® device.• Park the vehicle when connecting the head unit with the mobile phone.• Bluetooth® connection may become inter-mittently disconnected in some mobile phones. Follow these steps to try again.1. Turn the Bluetooth® function within the mobile phone OFF/ON and try again.2. Turn the mobile phone power OFF/ON and try again.3. Completely remove the mobile phone battery, reboot, and then again.4. Reboot the Multimedia System and try again.5. Delete all paired devices from both of Phone and Head Unit sides and then try again.• The Handsfree call volume and quality may differ depending on the mobile phone.• Pairing Bluetooth® devices and use of other Bluetooth® features are not sup-ported when the vehicle is in motion. For safety, please first park your vehicle.• If you continue having issues with downloading contacts, please check the mobile phone status or inquire of the mobile phone manufacturer. K_SC 17_DAUD2[MEX_EG]AV_PART3.indd 3-3K_SC 17_DAUD2[MEX_EG]AV_PART3.indd 3-3 2016-11-18 오후 3:31:592016-11-18 오후 3:31:5
3-4 I BluetoothBluetooth ConnectionPairing a New DeviceBefore you can use the Bluetooth feature, you must first pair/connect your mobile phone to your car.Up to 5 Bluetooth devices can be paired.Only one Bluetooth device can be con-nected at a time.Pairing a New Device by Selecting Phone/CallPress the PHONE key or key in the steering wheel control. ▶ Pair your car after your mobile phone detects the Bluetooth device. ▶ Enter the passkey or accept the authorization popup. ▶ Connect Bluetooth.Pairing a New Device Through the Phone SettingsPress the SETUP key. ▶ Select Bluetooth. ▶ Select Bluetooth Connection. ▶ Select Add New. ▶ Pair your car after your mobile phone detects the Bluetooth device. ▶ Enter the passkey or accept the authoriza-tion popup. ▶ Connect Bluetooth.The default passkey is 0000.The vehicle name above is an example. Check the actual information on the product.Connecting Bluetooth DevicesConnects the Bluetooth devices that you add.Connecting Devices by Selecting Phone/CallPress the PHONE key or key in the steering wheel control. ▶ Select the name of the device to connect. ▶ Connect Bluetooth.K_SC 17_DAUD2[MEX_EG]AV_PART3.indd 3-4K_SC 17_DAUD2[MEX_EG]AV_PART3.indd 3-4 2016-11-18 오후 3:31:592016-11-18 오후 3:31:5
Bluetooth Connection I 3-503Connecting Devices Through the Phone SettingsPress the SETUP key. ▶ Select Bluetooth. ▶ Select Bluetooth Connection. ▶ Select the name of the device to connect. ▶ Connect Bluetooth.Disconnecting Bluetooth DevicesDisconnects Bluetooth devices that are connected.Press the SETUP key. ▶ Select Bluetooth. ▶ Select Bluetooth Connection. ▶ Select the name of the device to disconnect.Deleting Bluetooth DevicesDeletes the Bluetooth devices that you added. Note that deleting a Bluetooth device will delete all Call History and Contact Info downloaded along with it.Press the SETUP key. ▶ Select Bluetooth. ▶ Select Bluetooth Connection. ▶ Select Delete Devices. ▶ Select the device name to delete. ▶ Select Delete.K_SC 17_DAUD2[MEX_EG]AV_PART3.indd 3-5K_SC 17_DAUD2[MEX_EG]AV_PART3.indd 3-5 2016-11-18 오후 3:32:022016-11-18 오후 3:32:0
3-6 I BluetoothBluetooth PhonePhone Status IconsShows the current phone status in the right top of the display.Icons DescriptionYou can use Bluetooth phones when a Bluetooth Hands-free connection is established.You can use Bluetooth audio features when a Bluetooth audio connection is established.You can use Bluetooth phones and audio features when both Bluetooth Hands-free and audio connections are established.Call signal strength indicatorBattery level of the Bluetooth devices connectedDownloading Call History listDownloading ContactsIn a Bluetooth phone callMicrophone mutedi Information• The battery level icon and the call signal strength indicator may not be supported in some Bluetooth devices. • The battery level may differ from the actual level remaining.K_SC 17_DAUD2[MEX_EG]AV_PART3.indd 3-6K_SC 17_DAUD2[MEX_EG]AV_PART3.indd 3-6 2016-11-18 오후 3:32:042016-11-18 오후 3:32:0
Bluetooth Phone I 3-703DialDials a call after the Bluetooth devices are connected.• Press the PHONE key or key in the steering wheel control. • You can also select All Menus ▶ Phone.Name Description KeypadUse the keypad to enter the phone number that you want to call. Press and hold the last number of a speed dial to dial a number that you added to the Speed Dial list in the phone CallMakes a call after you dial a number and select CALL. If the number is listed in Dialed Calls, you can select the number and press CALL to auto-matically dial that num-ber again. Settings Moves to a screen of Phone Settings. Delete Deletes the numbers that you entered.i Information• Some types of mobile phones may not support the Speed Dial function.Accept/Reject CallIf there is an incoming call after you made a Bluetooth connection, a popup message will appear.Name Description Accept Answers the call. Reject Ignores the call.i Information• In some mobile phones, the caller’s number may not be displayed, and the Reject feature may not be supported.K_SC 17_DAUD2[MEX_EG]AV_PART3.indd 3-7K_SC 17_DAUD2[MEX_EG]AV_PART3.indd 3-7 2016-11-18 오후 3:32:052016-11-18 오후 3:32:0
3-8 I BluetoothUsing the Menu During a Phone CallWhen making a call, you can use the fol-lowing menu items.Name Description Use PrivateSwitches a voice call from the car Hands-free to the mobile phone. End Ends a call. Contacts Displays the Contacts list. Outgoing VolumeDisplays the Mic Volume settings. You can adjust the in-call volume that the other party hears (level 1 - 5). Keypad Moves to a screen for entering numbers. SwitchSwitches to a call on hold, if any. You can also switch calls by select-ing the number in the Information Display. The Switch function switches the current call to a wait-ing call in order to answer a new incoming call.i Information• If the caller’s number is listed in Contacts, the caller’s name will be displayed. Otherwise, only the number will be displayed. In some mobile phones, the phone number may not be displayed.• In some Bluetooth devices, the Use Private feature may not be supported. • In some Bluetooth devices, the Switch feature may not be supported.• During a phone call on a Bluetooth Hands-free, you cannot access other modes, such as Radio and Setup. • Depending on handset types, the in-call volume the other party hears may differ. If the other party hears your voice too low or too loud, adjust the mic volume.K_SC 17_DAUD2[MEX_EG]AV_PART3.indd 3-8K_SC 17_DAUD2[MEX_EG]AV_PART3.indd 3-8 2016-11-18 오후 3:32:122016-11-18 오후 3:32:1
Bluetooth Phone I 3-903Call HistoryPress the PHONE key, and then Call History.Name Description All Lists the all call history. Dialed Lists the calls that you made. Received Lists the calls that you have received. Missed Lists the calls you missed. Call HistoryDisplays all of your call history. Select from the list to dial the number. DownloadDownloads the call his-tory information from your mobile phone.i Information• In some mobile phones, call records may not be added to your Call History.• Calls from restricted ID’s are not added to your Call History Information.• Up to 50 calls can be added in each Dialed Calls/Received Calls/Missed Calls list.• The durations of each dialed/received call are not displayed in your car’s Call History list.• While the call history download is in progress, the status bar displays an icon ( ).• If the call history download is turned off on the Bluetooth device, the call history download will fail.• Some devices require a device authentication for downloading your call history. If download fails, check if the Bluetooth settings or display status are normal.• Some devices do not support call history download. Check if your Bluetooth device supports download feature. K_SC 17_DAUD2[MEX_EG]AV_PART3.indd 3-9K_SC 17_DAUD2[MEX_EG]AV_PART3.indd 3-9 2016-11-18 오후 3:32:152016-11-18 오후 3:32:1
3-10 I BluetoothContactsPress the PHONE key, and then Contacts.Name Description Contacts ListThe list of Contacts. Select from the list to dial the number. Download Downloads contacts from your mobile phone. Search Searches Contacts.i Information• Up to 5000 phone numbers can be downloaded from a single, paired Bluetooth device.• You cannot edit or delete downloaded phone numbers from your car.• Contacts can be viewed only when the Bluetooth device is connected.• Even if the Bluetooth device is disconnected, the downloaded data will remain. (Note that deleting a paired phone will also delete all downloaded Contacts and Call History data)• Downloaded phone numbers may be lost depending on the condition of the head unit. Keep your important data in a safe place.• Contacts from both the SIM card and your mobile phone are downloaded at the same time by default.• The status bar displays a ( ) while downloading contacts.• The download will not be available if the contacts download function is turned off on your Bluetooth device.• Some devices require a device authentication for downloading your contacts. If download fails, check your phone screen and confirm the download if necessary.• Some devices do not support contacts download feature. Check if your Bluetooth device supports contacts download.K_SC 17_DAUD2[MEX_EG]AV_PART3.indd 3-10K_SC 17_DAUD2[MEX_EG]AV_PART3.indd 3-10 2016-11-18 오후 3:32:222016-11-18 오후 3:32:2
Bluetooth Phone I 3-1103FavoritesPress the PHONE key, and then Favorites.Name Description FavoritesLists the phone num-bers saved as Favorites. Select from the list to dial the number. Add New Adds a new number to Favorites. DeleteDeletes numbers that you select from Favorites.K_SC 17_DAUD2[MEX_EG]AV_PART3.indd 3-11K_SC 17_DAUD2[MEX_EG]AV_PART3.indd 3-11 2016-11-18 오후 3:32:262016-11-18 오후 3:32:2
MEMOK_SC 17_DAUD2[MEX_EG]AV_PART3.indd 3-12K_SC 17_DAUD2[MEX_EG]AV_PART3.indd 3-12 2016-11-18 오후 3:32:302016-11-18 오후 3:32:3
Camerapart.4 Other FeaturesK_SC 17_DAUD2[MEX_EG]AV_PART4.indd 4-1K_SC 17_DAUD2[MEX_EG]AV_PART4.indd 4-1 2016-11-18 오후 3:32:442016-11-18 오후 3:32:4
4-2 I Other FeaturesCamera WARNING- Backing Up & Using Camera• Never rely solely on the rear view camera when backing up. Prior to entering your vehicle always do a visual check of the area behind your vehicle, and before backing up be aware of your surroundings and supplement the rear view camera by looking over your shoulders and checking your rear view mir-rors. Due to the difficulty of ensuring that the area behind you remains clear, always back up slowly and stop immediately if you even suspect that a person, and especially a child, might be behind you.i Information• A separate chipset is used for the camera screen while booting up, so it may be different after booting up.Steering-linked camera• This device is connected to a rear detection camera to see behind the car for safe reversing.• The Rear View Camera turns on auto-matically if you shift the gear to R when the power is on or the engine has started.• While the device boots up, shift the gear to “R” to activate the rear detection cam-eras. Shift the gear to another position to deactivate the rear detection camera. NOTICE• A wide-angle lens is installed as the rear detection camera to get a wider view, so there may be some difference between the actual distance and the distance that appears. on-screen. For safety, make sure to view the back, right, and left sides of the car for yourself.• The color of the parking guidelines displayed in the picture may differ from the actual screen.• When booted up, blinking may occur when you switch to a UI screen.Name Description Red Line About 0.5 m from the rear bumper Yellow Line 1 About 1 m from the rear bumper Yellow Line 2 About 3 m from the rear bumper Yellow Line 3 Trajectory of the wheel on the driver’s side Yellow Line 4 Trajectory of the wheel on the passenger side Blue Line Neutral steering trajec-toryAs you reverse your car and monitor the area behind your car, the steering-linked driving trajectory and the neutral driving trajectory are both displayed.Other FeaturesK_SC 17_DAUD2[MEX_EG]AV_PART4.indd 4-2K_SC 17_DAUD2[MEX_EG]AV_PART4.indd 4-2 2016-11-18 오후 3:32:452016-11-18 오후 3:32:4
SetupSound SettingsDisplay SettingsBluetooth SettingsCustom Button SettingsHome Screen SettingsDate/Time SettingsLanguage SettingsKeyboard SettingsScreen Saver SettingsAdvanced SettingsSystem Infopart.5 SetupK_SC 17_DAUD2[MEX_EG]AV_PART5.indd 5-1K_SC 17_DAUD2[MEX_EG]AV_PART5.indd 5-1 2016-11-18 오후 3:33:072016-11-18 오후 3:33:0
5-2 I SetupSetupSetupSetup is the screen to control Audio sys-tem settings. To enter the screen, press the SETUP key or the Setup icon in All Menus.Features Description SoundProvides the sound con-trol options for Position, Bass, Mid, Treble, Volume, Priority and Advanced settings. Display Provides the Mode/Illumination settings. BluetoothProvides the Bluetooth Connection/Auto Connection Priority/Bluetooth System Info settings. Phone ProjectionFor more details, refer to Phone Projection guide. Custom ButtonProvides settings that configure the feature to be accessed when the key is pressed.Features Description Home ScreenProvides the function to customize the three menu items at the bottom of the Home Screen. Date/Time Provides the Date and Time settings. Language Provides the Change Language settings. KeyboardProvides settings to switch keyboard layouts. Screen SaverProvides the Clock/None settings. AdvancedProvides settings that configure notifications per feature, etc. System Info Provides software and default information. Display Off Provides the Display Off (touch activation) function.K_SC 17_DAUD2[MEX_EG]AV_PART5.indd 5-2K_SC 17_DAUD2[MEX_EG]AV_PART5.indd 5-2 2016-11-18 오후 3:33:082016-11-18 오후 3:33:0
Setup I 5-305Sound SettingsAdjusts the sound effects for the whole system.Features Description PositionSelect the Up/Down/Left/Right button to control sound positioning.Select to concen-trate the sound on the center of vehicle. ToneDrag the slide bar to con-trol Bass/Middle/Treble settings.Select Center to initialize the settings.Features Description PrioritySets the volume priority for Back-up warning and resets Start-up volume. AdvancedSelect additional audio options such as “Speed Dependent Volume Control” that automatically controls Audio volume according to vehicle speed. Default Resets the sound to fac-tory default settings. Beep Select to activate a beep when pressing buttons.i Information • Advanced sound settings may differ according to selected AMP option. • The seat shape may differ according to vehicle model.Display SettingsAdjusts the level of illumination for theentire system.Features Description ModeSelect any of LCD illumi-nation change modes:Automatic (changes the level automatically), Daylight, and Night. IlluminationSet the levels of illumina-tion for day and night.Select Default to initialize the settings. Default Resets the display to fac-tory default settings Display Off Provides the Display Off (touch activation) function.K_SC 17_DAUD2[MEX_EG]AV_PART5.indd 5-3K_SC 17_DAUD2[MEX_EG]AV_PART5.indd 5-3 2016-11-18 오후 3:33:262016-11-18 오후 3:33:2
5-4 I SetupBluetooth SettingsChanges Bluetooth phone settings.Bluetooth SettingsPress the SETUP key ▶ Select Bluetooth. Bluetooth ConnectionPress the SETUP key ▶ Select Bluetooth ▶ Select Bluetooth Connection.Features Description Paired Device ListDisplays the paired Bluetooth device list. When selecting from the list, the device is connected or discon-nected. Bluetooth Audio Connection StatusAn icon appears when you make a Bluetooth Audio con-nection. Bluetooth Hands-Free Connection StatusAn icon appears when you make a Bluetooth Hands-free connection. Add New Register a new Bluetooth device. Delete DevicesSelect and delete a paired device. HelpSwitches to the Bluetooth Connection Help screen.K_SC 17_DAUD2[MEX_EG]AV_PART5.indd 5-4K_SC 17_DAUD2[MEX_EG]AV_PART5.indd 5-4 2016-11-18 오후 3:33:362016-11-18 오후 3:33:3
Setup I 5-505i Information • Up to 5 Bluetooth devices can be paired. • Only one Bluetooth device can be connected at a time. • During a Bluetooth device connection, another device cannot be paired. • When you delete a paired device, the Call History and Contacts stored in the head unit are also deleted. • Bluetooth Hands-free and Bluetooth Audio functions are supported. • Hands-free and audio-supported devices, such as a Bluetooth smartphone or audio, will function normally. • When a Bluetooth device is connected, if the Bluetooth connection is unexpectedly disconnected, due to being out of communication range, the device powering off, or a Bluetooth communication error, the Bluetooth device automatically searches for and connects to nearby Bluetooth devices. • If the system is not stable, due to a vehicle-Bluetooth device communication error, restore the Default Factory Settings. • For Default Factory Settings, the bluetooth settings are reset to factory settings. • Press the SETUP key ▶ Select Bluetooth ▶ Select Default Factory Settings.Auto Connection PriorityPress the SETUP key ▶ Select Bluetooth ▶ Select Auto Connection Priority.When the engine is running, the selected Bluetooth device is automatically con-nected. If you fail to connect the selected device, the previously-connected device is automatically connected, and if it also fails, then it tries to connect all paired devices sequentially.Depending on auto connection priority, connection to a device may take time.Bluetooth System InfoPress the SETUP key ▶ Select Bluetooth ▶ Select Bluetooth System Info.Features Description Vehicle NameYou can change the Bluetooth device name of the vehicle. PasskeyYou can change the pass-key used for Bluetooth device authentication. the initial passkey is 0000.i Information • The vehicle name above is an example. Check the actual information on the product.K_SC 17_DAUD2[MEX_EG]AV_PART5.indd 5-5K_SC 17_DAUD2[MEX_EG]AV_PART5.indd 5-5 2016-11-18 오후 3:33:542016-11-18 오후 3:33:5
5-6 I SetupCustom Button SettingsYou can configure the feature to be accessed when the key is pressed.Setting it to a feature that you frequently use will allow you to access the feature quickly and conveniently anytime.For example, setting it to My Menu will enable you to access the My Menu screen by pressing the key.Home Screen SettingsYou can customize the three menu items at the bottom right of the Home Screen into the ones you want.On the Home Screen Settings screen, drag the menu items on the right to the area marked in red in the screen below.i Information • You can select the Default button to reset to the factory default settings.Date/Time SettingsConfigure the settings for time and date.Using the arrow buttons, you can change the values. Date/Time settings do not automatically change when crossing into different time zones. The time must be changed manually on this screen.Features Description Daylight Saving TimeThe daylight saving time (DST) is applied. 24 Hours The time display is set in 24-hour format. Direct entryIf you tap any value, you can directly enter the number in the following screen.K_SC 17_DAUD2[MEX_EG]AV_PART5.indd 5-6K_SC 17_DAUD2[MEX_EG]AV_PART5.indd 5-6 2016-11-18 오후 3:33:592016-11-18 오후 3:33:5
Setup I 5-705Language SettingsYou can configure the displayed system language.When the language is changed, the sys-tem language is automatically changed.Unique data including MP3 file name is not changed.Keyboard SettingsYou can configure the keyboard layout for each language.i Information • Configured keyboard layouts are applied to all input modes.Screen Saver SettingsYou can select any of the following screen formats to be displayed when the screen or power is turned off (Press and hold the Power button).• Digital clock and date• Analog clock and date• NoneK_SC 17_DAUD2[MEX_EG]AV_PART5.indd 5-7K_SC 17_DAUD2[MEX_EG]AV_PART5.indd 5-7 2016-11-18 오후 3:34:042016-11-18 오후 3:34:0
5-8 I SetupAdvanced SettingsYou can configure notifications per feature, etc.Features Description Media Change NotificationsSets whether to display media information at the top of the screen as the next item is played when not on the media screen. Steering Wheel Mode ButtonYou can configure the media to be accessed when the steering wheel’s MODE button is pressed.System InfoSystem version information and update details are available.Select the Update button to update the system.System UpdateAt the System Info screen, insert the USB memory with the latest file downloaded, and then select the Update button to begin updating. The system will then reboot automatically.i Information • This product needs supplemented software updates and additional functions, which collectively may take some time to complete, depending on the amount of data. CAUTION• If the power is disconnected or the USB is removed during an update, the data might be damaged. Please do not turn off the vehicle while an update is in progress.K_SC 17_DAUD2[MEX_EG]AV_PART5.indd 5-8K_SC 17_DAUD2[MEX_EG]AV_PART5.indd 5-8 2016-11-18 오후 3:34:062016-11-18 오후 3:34:0
Product Specification TroubleshootingFAQpart.6 AppendixK_SC 17_DAUD2[MEX_EG]AV_PART6.indd 6-1K_SC 17_DAUD2[MEX_EG]AV_PART6.indd 6-1 2016-11-18 오후 3:34:222016-11-18 오후 3:34:2
6-2 I AppendixProduct SpecificationTFT-LCD Screen Size 7 inch(152.4 X 91.44 mm)Resolution 384000 pixels (Resolution: 800 x 480)Operating Method TFT(Thin Film Transistor) Active MatrixViewing Angle Left/Right, Top/Bottom: ALL 89° Internal Lighting LED RadioChannels FM: 87.5 MHz ~ 107.9 MHz(Step: 200 kHz) AM: 530 kHz ~ 1710 kHz(Step: 10 kHz)Sensitivity FM: Under 10 dBu/AM: Under 35 dBuDistortion Factor Within 2 %CommonName Car TFT LCD Display Audio Unit Power Supply DC 14.4 V Operating Power DC 9 V ~ DC 16 VCurrent Consumption 2.5 A Sleep Current1 mA (Head Unit Only)Operating Temperature-20 ~ +70 °C(-4 ~ +158 °F)Storage Temperature-30 ~ +80 °C(-22 ~ +176 °F)Dimensions 178 X 140.2 X 60 mm (Main BOX)Weight 1.7 kgAppendixK_SC 17_DAUD2[MEX_EG]AV_PART6.indd 6-2K_SC 17_DAUD2[MEX_EG]AV_PART6.indd 6-2 2016-11-18 오후 3:34:232016-11-18 오후 3:34:2
06Appendix I 6-3Bluetooth® Wireless TechnologyFrequency Range 2402 ~ 2480 MHzSupported Bluetooth® Specification3.0Supported Profile Handsfree(1.6), A2DP(1.2), AVRCP(1.4), PBAP(1.0)Output -6~4 dBm (Power Class2, Conducted)Number of Channels 79 channels CAUTION• The producer and installer cannot provide services related to life safety as the concerned radio equipment is liable to radio interference.K_SC 17_DAUD2[MEX_EG]AV_PART6.indd 6-3K_SC 17_DAUD2[MEX_EG]AV_PART6.indd 6-3 2016-11-18 오후 3:34:232016-11-18 오후 3:34:2
6-4 I AppendixTroubleshooting1. Errors which occur during the operation or installation of the device may be mistaken as a malfunction of the actual device.2. If you are having problems with the device, try the suggestions listed below.3. If the problems persist, contact your Kia dealer.Problem Possible CauseThere are small red, blue, or green dots on the screen• Because the LCD is manufactured with technology requiring high point density, a pixel or lighting deficiency may occur within 0.01% of total pixelsThe sound or image is not working• Has the Switch for the vehicle been turned to [ACC] or [ON]?• Has the SYSTEM been turned OFF?The screen is being displayed but sound is not working• Has the volume been set to a low level?• Has the volume been muted?When the power is turned on, the corners of the screen are dark• The display appearing somewhat dark after prolonged periods of use is normal with LCD panels. It is not a malfunction• If the screen is very dark, contact your nearest Kia dealer for assistanceSound is working from only one speaker• Are the positions of Fader or Balance sound controls adjusted to only one side?Problem Possible CauseSound does not work in AUX mode• Are the audio connector jacks fully inserted into the AUX terminal?The external device is not working• Is the external device connected with a standard connector cable?Upon turning power on, the most recent mode screen is not displayedWithin modes that play files by reading external sources, such as USB, iPod, or Bluetooth® streaming mode, the most recently played mode screen prior to turn-ing off power may not properly load• If the corresponding device is not con-nected, the mode operated prior to the most recent mode will operate• If the previous mode still cannot be properly played, the mode operated prior to that will operateK_SC 17_DAUD2[MEX_EG]AV_PART6.indd 6-4K_SC 17_DAUD2[MEX_EG]AV_PART6.indd 6-4 2016-11-18 오후 3:34:232016-11-18 오후 3:34:2
06Appendix I 6-5Problem Possible Cause Countermeasure The power does not turn onThe fuse is disconnected• Replace with a suitable fuse• If the fuse is disconnected again, please contact your point of purchase or Kia dealerDevice is not prop-erly connected• Check to see that the device has been properly connectedThe system does not playThe vehicle battery is low• Charge the battery If the problem persists, contact your point of purchase or Kia dealerProblem Possible Cause Countermeasure The image color/tone quality is low• The brightness, saturation, hue, and contrast levels are not set properly• Properly adjust the bright-ness, saturation, hue, and contrast levels through Display SetupSound does not work• The volume level is set to the lowest level• The connection is not proper• The device is currently fast-for-warding, rewinding, scanning, or play-ing in slow mode• Adjust the volume level• Check to see that the device has been properly connected• The sound will not work when the device is fast-for-warding, rewinding, scan-ning, or playing in slow modeThe sound or image quality is low• Vibration is occur-ring from where the conversion switch has been installed• Image color/tone quality is low• The sound may be short-circuited and the image distorted if the device vibrates• The device will return to normal once vibrations stopK_SC 17_DAUD2[MEX_EG]AV_PART6.indd 6-5K_SC 17_DAUD2[MEX_EG]AV_PART6.indd 6-5 2016-11-18 오후 3:34:232016-11-18 오후 3:34:2
6-6 I AppendixProblem Possible Cause Countermeasure The USB does notwork• USB memory is damaged• Please use the USB after formatting it. • USB memory has been contami-nated• Remove any foreign sub-stances on the contact sur-face of the USB memory and multimedia terminal• A separately pur-chased USB HUB is being used• Directly connect the USB memory with the multime-dia terminal on the vehicle• A USB extension cable is being used• Directly connect the USB memory with the multime-dia terminal on the vehicle• A USB which is not a Metal Cover Type USB Memory is being used• Use standard USB Memory• An HDD type, CF, SD Memory is being used• Use standard USB Memory• There are no music files which can be played• Only MP3, WMA file formats are supported. Please use only the sup-ported music file formatsProblem Possible Cause Countermeasure The iPod is not recog-nized even though it has been connected• There are no titles which can be played• Use iTunes to download and save MP3 files into the iPod• The iPod firmware version has not been properly updated• Use iTunes to update the firmware version and reconnect the iPod with the device• The iPod device does not recog-nize downloads• Reset the iPod and recon-nect with the deviceBluetoothdoes notwork or itslimitedfunctions areavailable• Bluetooth on your mobile phone is set to OFF• Set it to ON• The Bluetooth connection is not made• Make the connection activei Information • While operating the device, if an abnormality occurs that cannot be corrected with the above described measures, press the RESET key to reset the system. • Press and hold the RESET key (over 1 second). The device power will turn off and the system will reset.K_SC 17_DAUD2[MEX_EG]AV_PART6.indd 6-6K_SC 17_DAUD2[MEX_EG]AV_PART6.indd 6-6 2016-11-18 오후 3:34:242016-11-18 오후 3:34:2
06Appendix I 6-7FAQAbout Pairing Mobile PhonesQ I cannot pair my mobile phone. What is the cause? A Check to see that the mobile phone supports Bluetooth® func-tion. Verify if Bluetooth on the cell phone is set to OFF. If so, set it to ON. If the cell phone still can’t be registered, try again after turning Bluetooth off and on, or delete the device registration on the multimedia system and cell phone and then register the cell phone again.Q What is the difference between pairing a mobile phone and con-necting a mobile phone? A Pairing occurs through authenticating the head unit and mobile phone. Mobile phones paired to the head unit can be connected and disconnected until the paired mobile phone is deleted from the system. Bluetooth® Handsfree features, such as making/answering calls or managing contacts, are supported only in mobile phones connected with the head unit. Q What is a Passkey? A A passkey is the password used to authenticate the connection between the head unit and mobile phone. The passkey only needs to be entered once when pairing the mobile phone for the first time. The initial passkey is 0000. You can change it with SETUP ▶ Bluetooth ▶ Bluetooth System Info ▶ Passkey menu options. K_SC 17_DAUD2[MEX_EG]AV_PART6.indd 6-7K_SC 17_DAUD2[MEX_EG]AV_PART6.indd 6-7 2016-11-18 오후 3:34:242016-11-18 오후 3:34:2
6-8 I AppendixAbout Making/Answering Phone CallsQ How can I answer a call?A When there is an incoming call, a notification pop-up will become displayed. To answer the incoming call, select the Accept button on the screen or press the key on the steering wheel control. To reject the call, select the Reject button on the screen or press the key on the steering wheel control. Q What should I do if I am talking on the Handsfree but want to switch the call to the mobile phone?A While on a call, press and hold (over 0.8 seconds) the key on the steering wheel control or select the Use Private but-ton at the bottom of the Phone screen to switch the call to your mobile phone.About Bluetooth® Wireless Technology/Head Unit Use EnvironmentQ What is the range of my wireless connection?A The wireless connection can be used within 15 yards.Q How many mobile phones can be paired?A It is possible to pair up to five mobile phones.Q Why is call quality sometimes poor?A Check the reception sensitivity of the mobile phone when call quality becomes worsened. The call quality may deteriorate when the signal strength is low. Call quality may also worsen if metal objects, such as beverage cans, are placed near the mobile phone. Check to see if there are metal objects in the vicinity of the mobile phone. The call sound and quality may differ depend-ing on the type of mobile phone. K_SC 17_DAUD2[MEX_EG]AV_PART6.indd 6-8K_SC 17_DAUD2[MEX_EG]AV_PART6.indd 6-8 2016-11-18 오후 3:34:242016-11-18 오후 3:34:2
06Important Safety InformationBefore using your Multimedia system, read and follow all instructions and safety information provided in this end user manual (“User’s Guide”). Not following precautions found in this User’s Guide can lead to an accident or other serious consequences.Keep User’s Guide in VehicleWhen kept in the vehicle, the User’s Guide will be a ready reference for you and other users unfamiliar with the Multimedia system. Please make certain that before using the system for the first time, all persons have access to the User’s Guide and read its instructions and safety information carefully.WarningOperating certain parts of this system while driving can distract your attention away from the road, and possibly cause an accident or other serious consequences. Do not change system settings or enter data non-verbally (using your hands) while driving. Stop the vehicle in a safe and legal manner before attempting these operations. This is important since while setting up or changing some functions as you may to distract your attention away from the road and remove your hands from the wheel.K_SC 17_DAUD2[MEX_EG]AV_PART6.indd 6-9K_SC 17_DAUD2[MEX_EG]AV_PART6.indd 6-9 2016-11-18 오후 3:34:252016-11-18 오후 3:34:2
Prolonged Views of ScreenDo not access any function requiring a prolonged view of the screen while you are driving. Pull over in a safe and legal manner before attempting to access a function of the system requiring prolonged attention. Even occasional short scans to the screen may be hazardous if your attention has been diverted away from your driving task at a critical time.Volume SettingDo not raise the volume excessively. Keep the volume at a level where you can still hear outside traffic and emergency signals while driving. Driving while unable to hear these sounds could cause an accident.K_SC 17_DAUD2[MEX_EG]AV_PART6.indd 6-10K_SC 17_DAUD2[MEX_EG]AV_PART6.indd 6-10 2016-11-18 오후 3:34:252016-11-18 오후 3:34:2

Navigation menu