HYUNDAI MOBIS AC610HGMG DIGITAL CAR AUDIO SYSTEMS User Manual H HG 1012 GEN 0104 qxp

HYUNDAI MOBIS CO., LTD. DIGITAL CAR AUDIO SYSTEMS H HG 1012 GEN 0104 qxp

UserManual.wiki >

HYUNDAI MOBIS >

AC610HGMG User Manual

USER MANUAL

DIGITAL CAR AUDIO SYSTEMUser ManualAC610HGMGAC610HGGNAC610HGGE Hyundai MOBIS Co., Ltd.

FCC WarningThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in aresidential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installedand used in accordance with the instructions, may cause harmful interference to radio communications. However,there is no guarantee that interference will not occur in a particular installation. If this equipment does causeharmful interference to radio or television reception, which can be determined by turning the equipment off andon, the user is encouraged to try to correct the interference by one or more of the following measures:■Reorient or relocate the receiving antenna.■Increase the separation between the equipment and receiver.■Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.■Consult the dealer or an experienced radio/TV technician for help.Caution: Any changes or modifications to this device not explicitly approved by manufacturer could voidyour authority to operate this equipment.This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received,including interference that may cause undesired operation.

41Knowing your vehicleD300800AHMHow vehicle audio worksAM and FM radio signals are broadcastfrom transmitter towers located aroundyour city. They are intercepted by theradio antenna on your vehicle. This signalis then received by the radio and sent toyour vehicle speakers.When a strong radio signal has reachedyour vehicle, the precise engineering ofyour audio system ensures the best pos-sible quality reproduction. However, insome cases the signal coming to yourvehicle may not be strong and clear. Thiscan be due to factors such as the dis-tance from the radio station, closeness ofother strong radio stations or the pres-ence of buildings, bridges or other largeobstructions in the area.AM broadcasts can be received atgreater distances than FM broadcasts.This is because AM radio waves aretransmitted at low frequencies. Theselong, low frequency radio waves can fol-low the curvature of the earth rather thantravelling straight out into the atmos-phere. In addition, they curve aroundobstructions so that they can provide bet-ter signal coverage.¢¢¢¢¢¢JBM002AM radio reception¢¢¢JBM001FM radio reception

Knowing your vehicle24FM broadcasts are transmitted at highfrequencies and do not bend to follow theearth's surface. Because of this, FMbroadcasts generally begin to fade atshort distances from the station.Also, FM signals are easily affected bybuildings, mountains, or other obstruc-tions. These can result in certain listeningconditions which might lead you tobelieve a problem exists with your radio.The following conditions are normal anddo not indicate radio trouble:• Fading - As your vehicle moves awayfrom the radio station, the signal willweaken and sound will begin to fade.When this occurs, we suggest that youselect another stronger station.• Flutter/Static - Weak FM signals orlarge obstructions between the trans-mitter and your radio can disturb thesignal causing static or fluttering nois-es to occur. Reducing the treble levelmay lessen this effect until the distur-bance clears.• Station Swapping - As a FM signalweakens, another more powerful sig-nal near the same frequency maybegin to play. This is because yourradio is designed to lock onto the clear-est signal. If this occurs, select anotherstation with a stronger signal.• Multi-Path Cancellation - Radio signalsbeing received from several directionscan cause distortion or fluttering. Thiscan be caused by a direct and reflect-ed signal from the same station, or bysignals from two stations with closefrequencies. If this occurs, selectanother station until the condition haspassed.JBM005¢¢¢JBM004JBM003FM radio station

43Knowing your vehicleUsing a cellular phone or a two-wayradioWhen a cellular phone is used inside thevehicle, noise may be produced from theaudio equipment. This does not meanthat something is wrong with the audioequipment. In such a case, use the cellu-lar phone at a place as far as possiblefrom the audio equipment.Care of discs• If the temperature inside the vehicle istoo high, open the vehicle windows forventilation before using your vehicleaudio.• It is illegal to copy and use MP3/WMAfiles without permission. Use CDs thatare created only by lawful means.• Do not apply volatile agents such asbenzene and thinner, normal cleanersand magnetic sprays made for ana-logue disc onto CDs.• To prevent the disc surface from get-ting damaged. Hold and carry CDs bythe edges or the edges of the centerhole only.• Clean the disc surface with a piece ofsoft cloth before playback (wipe it fromthe center to the outside edge).• Do not damage the disc surface orattach pieces of sticky tape or paperonto it.• Make sure objects other than CDs arenot inserted into the CD player (Do notinsert more than one CD at a time).• Keep CDs in their cases after use toprotect them from scratches or dirt.• Depending on the type of CD-R/CD-RW CDs, certain CDs may not operatenormally according to manufacturingcompanies or making and recordingmethods. In such circumstances, if youstill continue to use those CDs, theymay cause the malfunction of yourvehicle audio system.✽✽NOTICE - Playing anIncompatible CopyProtected Audio CDSome copy protected CDs, which do notcomply with the international audio CDstandards (Red Book), may not play onyour vehicle audio. Please note that ifyou try to play copy protected CDs andthe CD player does not perform correct-ly the CDs maybe defective, not the CDplayer.WARNINGDo not use a cellular phone whiledriving. Stop at a safe location touse a cellular phone.

Using RADIO, SETUP, VOLUMEand AUDIO CONTROL1. ButtonTurns to FM mode and toggles FM1andFM2 when the button is pressed each time.2. ButtonPressing the button selects theAM band. AM Mode is displayed on theLCD.3. Button• When the button is pressed,it increases the band frequency to auto-matically select channel. Stops at theprevious frequency if no channel isfound.• When the button is press-ed, it reduces the band frequency toautomatically select channel. Stops atthe previous frequency if no channel isfound.4. Button(AUTO STOREButton)When the button is pressed, it automati-cally selects and saves channels withhigh reception rate to PRESET buttons~ and plays the channelsaved in PRESET1. If no channel issaved after AST, it will play the previouschannel.• When the button is pressed for longerthan 0.8 second, it automatically scansthe radio preset station upwards.• Press the button again to stopthe scan feature and to listen to thecurrently selected channel.5. KnobIf the knob is turned clockwise/counter-clockwise, the volume will increase/decrease.6. Button■AC110/100/610/600HGPress this button to turn to the SETUPadjustment mode.If no action is taken for 8 seconds afterpressing the button, it will return to theplay mode. (After entering SETUP mode,select Manual , buttonand push button)The setup changes in the order ofScroll ➟ SDVC ➟ Media ➟ Sound ➟Phone ➟ Clock ➟ Scroll...■AC210/200HGThe setup Change in the order of Scroll ➟ SDVC ➟ Media ➟ V-EQ ➟Sound ➟Phone ➟Clock ➟➟Scroll ...OKTUNEFILESETUPVOLUMESCAN61ASTSEEKTRACKSEEKTRACKSEEKAMAMFM45Knowing your vehicleAC110HG_CDP_BT

Knowing your vehicle64• SCROLLThis function is used to display charac-ters longer than the LCD text display andcan be turned On/Off through the,button.• SDVC (Speed Dependent Volume Control)This function automatically adjusts thevolume level according to the speed ofthe vehicle and can be turned On/Offthrough the ,button.• MEDIASelect default display of MP3 play infor-mation. “Folder/File” or “Artist/Title” canbe selected.• V-EQPress the ,button toselect the Variable EQ the followingorder : Normal, Dynamic, ConcertSelect and press the button tocomplete and exit from Variable EQsetup mode.• SOUNDThe Bass, Middle, Treble, Fader, Balancemode. Press the ,buttonto select mode. After selecting eachmode, press , button.BASS ControlTo increase the BASS, press the rightbutton, while to decrease the BASS,press the left button.MIDDLE ControlTo increase the MIDDLE, press the rightbutton, while to decrease the MIDDLE,press the left button.TREBLE ControlTo increase the TREBLE, press the rightbutton, while to decrease the TREBLE,press the left button.FADER ControlPress the right button to emphasize rearspeaker sound(front speaker sound willbe attenuated). When the left button ispressed, front speaker sound will beemphasized(rear speaker sound will beattenuated).TUNEFILEFOLDERFOLDEROKTUNEFILETUNEFILETUNEFILEAC110HG_CDP_BT

47Knowing your vehicleBALANCE ControlPress the right button to emphasize rightspeaker sound(left speaker sound will beattenuated). When the left button ispressed, left speaker sound will beemphasized(right speaker sound will beattenuated).• PHONE (if equipped)Select this item to enter PHONE setup mode.Refer to “BLUETOOTH PHONE OPERA-TION” section for detailed information.❈“PHONE” menu is not available if theaudio does not support Bluetooth features.• CLOCKSelect this item to enter Clock setup mode.Adjust the hour using ,button and press the button.Adjust the minute using ,button and press the button tocomplete and exit from clock adjustmentmode.Press the button for more than 1seconds while in power off/on, you canenter the Clock setup mode directly.• Return( )This function displays the previous MODEscreen. 8. PRESET ButtonsPush ~ buttons less than 0.8second to play the channel saved in eachbutton. Push Preset button for 0.8 sec-ond or longer to save current channel tothe respective button with a beep.9. Button• Turns on/off the set when the IGNI-TION SWITCH is on ACC or ON.10. ButtonTurn ON/OFF the displayed data andlight on LCD.When LCD Display is turned OFF, Pressany button to turn ON display.DISP61SETUPOKFOLDERFOLDERTUNEFOLDERFOLDERAC110HG_CDP_BT

Knowing your vehicle84Using CD Player1. Button (CD)If the CD is loaded, turns to CD mode.If no CD, it displays “No Media” for 3 sec-onds and returns to the previous mode.2. Button• Press button for less than0.8 seconds to play from the beginningof current song.• Press button for less than 0.8 seconds and press again within1 second to play the previous song.• Press button for 0.8 secondsor longer to initiate reverse directionhigh speed sound search of currentsong.• Press button for less than0.8 seconds to play the next song.• Press button for 0.8 secondsor longer to initiate forward directionhigh speed sound search of currentsong.3. ButtonPlay each song in the CD for 10 seconds.To cancel SCAN Play, press this buttonagain.4. ButtonPress the button to play theselect song.5. ButtonDisplays the information of the currentCD TRACK(FILE) as below when thebutton is pressed each time.• CDDA : Disc Title, Disc Artist, Track Title,Track Artist, Total Track.• MP3/WMA : File Name, Title, Artist,Album, Folder, Total File.(not displayed if the information isnot available on the DISC.)6. Button (REPEAT)Press this button for less than 0.8 secondto activate ‘RPT’ mode and more than 0.8seconds to activate ‘FLD.RPT’ mode.• RPT : Only a track(file) is repeatedlyplayed back.•FLD.RPT (MP3/WMA Only) : Only filesin a folder are repeatedly played back.❈DISC RPT(CD Changer) : Repeats theentire DISC when this button is pressedfor 0.8 seconds or longer.7. Button (RANDOM)Press this button for less than 0.8 secondto activate ‘RDM’ mode and longer than0.8 second to activate ‘ALL RDM’ mode.•FLD.RDM : Only files/tracks in a folder/discare played back in random sequence.•ALL RDM(MP3/WMA Only) : All files ina disc are played back in randomsequence.8. Button (CD changer :AC610/600HG)• Preset Change Button Changes5DISCDISC2 RDM1 RPTINFOOKOKSCANSEEKTRACKSEEKTRACKSEEKTRACKSEEKTRACKSEEKTRACKTRACKMEDIAAC110HG_CDP_BTAC610HG_CDC_BTAC110HG_CDP_BT

49Knowing your vehicledisc to the previous disc.• Preset Change Button Changesdisc to the next disc.9. Button (CD Eject)Push button for less than 0.8 sec-onds to eject the CD during CD playback.This button is enabled when ignition switchis off.• ALL EJECT(CD Changer : AC610/600HG)Press this button for more than 0.8 sec-onds to eject all discs inside the deck inrespective order.10. CD SlotPlease face printed side upward andgently push in. When the ignition switchis on ACC or ON and power is off, poweris automatically turned on if the CD isloaded. This CDP supports only 12cmCD. If VCD, Data CD are loaded,"Reading Error" message will appearand CD will be ejected.11. Button (CD changer :AC610/600HG)Push button to load CDs to avail-able CDC deck (from 1~6). Push button for more than 2 seconds to loadinto all available decks. The last CD willplay. 10 seconds idle status will disableloading process.12. Button • Press button to move to childfolder of the current folder and displaythe first song in the folder.Press button to move to thefolder displayed. It will play the firstsong in the folder.• Press button to move to par-ent folder of the current folder and dis-play the first song in the folder.Press button to move to thefolder displayed.13. Search ButtonPress the button to display thesongs next to the currently played song.press the button to display thesongs before to the currently playedsong.FILETUNEOKFOLDEROKFOLDERFOLDERLOADLOADLOAD6DISCAC610HG_CDC_BTAC110HG_CDP_BT

Knowing your vehicle104CAUTION IN USING USB DEVICE• To use an external USB device,make sure the device is not con-nected when starting up the vehi-cle. Connect the device afterstarting up.• If you start the engine when theUSB device is connected, it maydamage the USB device. (USBflashdrives are very sensitive toelectric shock.)• If the engine is started up orturned off while the external USBdevice is connected, the externalUSB device may not work.• It may not play inauthentic MP3 orWMA files.1) It can only play MP3 files withthe compression rate between8Kbps~320Kbps.2) It can only play WMA musicfiles with the compression ratebetween 8Kbps~320Kbps.• Take precautions for static electrici-ty when connecting or disconnect-ing the external USB device.(Continued)(Continued)• An encrypted MP3 PLAYER is notrecognizable.• Depending on the condition ofthe external USB device, the con-nected external USB device canbe unrecognizable.• When the formatted byte/sectorsetting of External USB device isnot either 512BYTE or 2048BYTE,then the device will not be recog-nized.• Use only a USB device formattedto FAT 12/16/32.• USB devices without USB I/Fauthentication may not be recog-nizable.• Make sure the USB connectionterminal does not come in contactwith the human body or otherobjects.• If you repeatedly connect or dis-connect the USB device in a shortperiod of time, it may break thedevice.• You may hear a strange noisewhen connecting or disconnect-ing a USB device.(Continued)(Continued)• If you disconnect the external USBdevice during playback in USBmode, the external USB device canbe damaged or may malfunction.Therefore, disconnect the externalUSB device when the audio isturned off or in another mode. (e.g,Radio or CD)• Depending on the type and capacityof the external USB device or thetype of the files stored in the device,there is a difference in the timetaken for recognition of the device.• Do not use the USB device for pur-poses other than playing music files.• Playing videos through the USB isnot supported.• Use of USB accessories such asrechargers or heaters using USBI/F may lower performance orcause trouble.• If you use devices such as a USBhub purchased separately, thevehicle’s audio system may notrecognize the USB device. In thatcase, connect the USB devicedirectly to the multimedia termi-nal of the vehicle.(Continued)

411Knowing your vehicle(Continued)• If the USB device is divided bylogical drives, only the music fileson the highest-priority drive arerecognized by car audio.• Devices such as MP3 Player/Cellular phone/Digital camera canbe unrecognizable by standardUSB I/F can be unrecognizable.• Charging through the USB maynot be supported in some mobiledevices.❋ A car exclusive cable (sold sep-arately) is required to use theiPod.• Some non-standard USB devices(METAL COVER TYPE USB) can beunrecognizable.• Some USB flash memory readers(such as CF, SD, microSD, etc.) orexternal-HDD type devices can beunrecognizable.• Music files protected by DRM(DIGITAL RIGHTS MANAGEMENT)are not recognizable.• The data in the USB memory maybe lost while using this audio.Always back up important data ona personal storage device.(Continued)(Continued)• A SD-to-USB adapter may notwork with the car audio system.• Please avoid using USB memoryproducts which can be used askey chains or cellular phoneaccessories as they could causedamage to the USB jack. Pleasemake certain only to use plug typeconnector products as shownbelow.

Knowing your vehicle124Using USB device1. Button (USB)If USB is connected, it switches to theUSB mode from the other mode to playthe song files stored in the USB. If no CDand auxiliary device is not connected, itdisplays "No Media" for 3 seconds andreturns to the previous mode.2. Button• Press button for less than0.8 seconds to play from the beginningof current song.• Press button for less than 0.8 seconds and press again within1 second to play the previous song.• Press button for 0.8 secondsor longer to initiate reverse directionhigh speed sound search of currentsong.• Press button for less than0.8 seconds to play the next song.• Press button for 0.8 secondsor longer to initiate forward directionhigh speed sound search of currentsong.3.ButtonPlay each song in the CD for 10 seconds.To cancel SCAN Play, press this buttonagain.4. ButtonPress the button to play theselect song.5. ButtonDisplays the information of the file cur-rently played in the order of File Name,Title, Artist, Album, Folder, Total File,Normal Display.(Displays no information if the file has nosong information.)6. Button (REPEAT)Press this button for less than 0.8 secondto activate 'RPT' mode and longer than0.8 second to activate 'FLD.RPT' mode.• RPT : Only the current file is repeated-ly played back.•FLD.RPT : All files in a folder arerepeatedly played back.7. Button (RANDOM)Press this button for less than 0.8 sec-onds to activate ‘RDM’ mode and morethan 0.8 seconds to activate ‘ALL RDM’mode.•FLD.RDM : Only files in a folder areplayed back in a random sequence.•ALL RDM: All files in a USB memory areplayed back in the random sequence.2 RDM1 RPTINFOOKOKSCANSEEKTRACKSEEKTRACKSEEKTRACKSEEKTRACKSEEKTRACKTRACKMEDIAAC110HG_CDP_BTAC110HG_CDP_BTAC110HG_CDP_BT

413Knowing your vehicle8. Button• Press button to move to childfolder of the current folder and displaythe first song in the folder.Press button to move to thefolder displayed. It will play the firstsong in the folder.• Press button to move to par-ent folder display the first song in thefolder.Press button to move to thefolder displayed.9. Search ButtonPress the button to display thesongs next to the currently played song.press the button to display thesongs before to the currently playedsong.FILETUNEOKFOLDEROKFOLDERFOLDERAC110HG_CDP_BT

Knowing your vehicle144✽✽NOTICE FOR USING THEiPod DEVICE• Some iPod models might not sup-port the communication protocoland the files will not be played. Supported iPod models: - iPod Mini- iPod 4th(Photo) ~ 6th(Classic)generation- iPod Nano 1st~4th generation- iPod Touch 1st~2nd generation• The order of search or playback ofsongs in the iPod can be differentfrom the order searched in theaudio system.• If the iPod disabled due to its ownmalfunction, reset the iPod. (Reset:Refer to iPod manual)• An iPod may not operate normallyon low battery.• Some iPod devices, such as theiPhone, can be connected through theBluetooth®interface. The devicemust have audio Bluetooth®capabili-ty (such as for stereo headphoneBluetooth®). The device can play, butit will not be controlled by the audiosystem.CAUTION IN USING THE iPod DEVICE• The Hyundai iPod Power Cable isneeded in order to operate iPodwith the audio buttons on theaudio system. The USB cable pro-vided by Apple may cause mal-function and should not be usedfor Hyundai vehicles.❋ The Hyundai iPod Power Cablemay be purchased through yourHyundai Dealership.• When connecting iPod with theiPod Power Cable, insert the con-nector to the multimedia socketcompletely. If not inserted com-pletely, communications betweeniPod and audio may be interrupted.• When adjusting the sound effects ofthe iPod and the audio system, thesound effects of both devices willoverlap and might reduce or distortthe quality of the sound.• Deactivate (turn off) the equalizerfunction of an iPod when adjust-ing the audio system’s volume,and turn off the equalizer of theaudio system when using theequalizer of an iPod.(Continued)(Continued)• When the iPod cable is connected,the system can be switched to AUXmode even without iPod deviceand may cause noise. Disconnectthe iPod cable when you are notusing the iPod device.• When not using iPod with caraudio, detach the iPod cable fromiPod. Otherwise, iPod may remainin accessory mode, and may notwork properly.• When connecting the iPod, use theUSB/AUX terminals.• When disconnecting the iPod,disconnect both the USB/AUX ter-minal.• The iPod exclusive cable must beconnected to both the USB/AUXterminals for iPod charging andoperations to be supported.Detachable USB/AUXAll-in-one USB/AUX

415Knowing your vehicleUsing iPod❋iPod is a trademark of Apple Inc.1. Button (iPod)If iPod is connected, it switches to theiPod mode from the previous mode toplay the song files stored in the iPod.If there is no iPod connected, then it dis-plays the message "No Media" for 3 sec-onds and returns to the previous mode.2. Button• Press button for less than0.8 seconds to play from the beginningof current song.• Press button for less than 0.8 seconds and press again within1 second to play the previous song.• Press button for 0.8 secondsor longer to initiate reverse directionhigh speed sound search of currentsong.• Press button for less than0.8 seconds to play the next song.• Press button for 0.8 secondsor longer to initiate forward directionhigh speed sound search of currentsong.3. Button (iPod)Displays the information of the file cur-rently played in the order of Title, Artist,Album, Normal Display.(Displays no information if the file has nosong information.)4. ButtonPress the button to play theselect song.5. Button (REPEAT)Repeats the song currently played.6. Button (RANDOM)• Press this button for less than 0.8 sec-onds to shuffle order of all songs incurrent category. (Song Random)• Press this button for 0.8 seconds orlonger to shuffle order of albums in cur-rent category. (Album Random)• To cancel RANDOM Play, press thisbutton again.7. CATEGORY ButtonMoves to the upper category from cur-rently played category of the iPod.To move to (play) the category (song)displayed, press , but-ton.You will be able to search through thelower category of the selected category.FOLDERFOLDER2 RDM1 RPTOKOKINFOSEEKTRACKSEEKTRACKSEEKTRACKSEEKTRACKSEEKTRACKTRACKMEDIAAC110HG_CDP_BTAC110HG_CDP_BTAC110HG_CDP_BT

Knowing your vehicle164CAUTION IN USINGBLUETOOTH®CELLULARPHONE• Do not use a cellular phone orperform Bluetooth®settings (e.g.pairing a phone) while driving.• Some Bluetooth®-enabled phonesmay not be recognized by thesystem or fully compatible withthe system.• Before using Bluetooth®relatedfeatures of the audio system,refer your phone’s User’s Manualfor phone-side Bluetooth®opera-tions.•The phone must be paired to theaudio system to use Bluetooth®related features.• You will not be able to use thehands-free feature when yourphone (in the car) is outside ofthe cellular service area (e.g. in atunnel, in a underground, in amountainous area, etc.).• If the cellular phone signal is pooror the vehicles interior noise istoo loud, it may be difficult to hearthe other person’s voice during acall.(Continued)(continued)• Do not place the phone near orinside metallic objects, otherwise communications with Bluetooth®system or cellular service sta-tions can be disturbed.• While a phone is connectedthrough Bluetooth®your phonemay discharge quicker than usualfor additional Bluetooth®-relatedoperations.• Some cellular phones or otherdevices may cause interferencenoise or malfunction to audiosystem. In this case, store thedevice in a different location mayresolve the situation.• Please save your phone name inEnglish, or your phone name maynot be displayed correctly.

417Knowing your vehicleBLUETOOTH®PHONE OPERATION(if equipped)1. button : Raises or lowersspeaker volume.2. button : Mute the microphoneduring a call.3. button : Places and transfers calls.4. button : Ends calls or cancels func-tions.■What is Bluetooth®?Bluetooth®is a wireless technology thatallows multiple devices to be connectedin a short range, low-powered deviceslike hands-free, stereo headset, wirelessremote control, etc. For more informa-tion, visit the Bluetooth®website atwww.Bluetooth.com■General Features• This audio system supports Bluetooth®hands-free and stereo-headset fea-tures.- HANDS-FREE feature: Making orreceiving calls wirelessly.- STEREO-HEADSET feature: Playingmusic from cellular phones (that sup-ports A2DP feature) wirelessly.✽✽NOTICE• The phone must be paired to the sys-tem before using Bluetooth®features.• Only one selected (connected) cellularphone can be used with the system ata time.• Some phones are not fully compatiblewith this system.■Phone SetupAll Bluetooth®-related operations can beperformed in PHONE menu.1) Push the button to enterSETUP mode.2) Select “PHONE” item by using, button, then pushthe button.3) Select desired item by using, button, then pushthe button.OKTUNEFILEOKTUNEFILESETUPMUTEVOLUME4312

Knowing your vehicle184• Pairing a phoneBefore using Bluetooth®features, thephone must be paired (registered) withthe audio system. Up to 5 phones can bepaired with the system.NOTE:• The pairing procedure of the phonevaries according to each phonemodel. Before attempting to pairphone, please see your phone’sUser’s Guide for instructions.• Once pairing with the phone is com-pleted, there is no need to pair withthat phone again unless the phoneis deleted manually from the audiosystem (refer “Deleting a Phone”section) or the vehicle’s informationis removed from the phone.1. Press button to enter SETUPmode.2. Select “Phone”, then “Pair” in PHONEmenu.3. The audio displays “searching ----passkey: 0000”4. Search the Bluetooth®system on yourphone .Your phone should display your[vehicle model name] on theBluetooth®device list. Then attemptpairing on your phone.NOTE:If the phone is paired to two or morevehicles of the same model, i.e. bothvehicles are HYUNDAI AZERA, somephones may not handle Bluetooth®devices of that name correctly. In thiscase, you may need to change thename displayed on your phone fromAZERA to AZERA1 and AZERA2.Refer to your phone’s User’s Guide, orcontact your cellular carrier or phonemanufacturer for instructions.• Connecting a phoneWhen the Bluetooth®system is enabled,the phone previously used is automati-cally selected and re-connected. If youwant to select different phone previouslypaired, the phone can be selectedthrough “Select Phone” menu.Only a selected phone can be used withthe hands-free system at a time.1. Press button to enter SETUPmode.2. Select “Phone”, then “Select”inPHONE menu.3. Select desired phone name from the listshown.• Deleting a PhoneThe paired phone can be deleted.- When the phone is deleted, all the infor-mation associated with that phone isalso deleted (including phonebook).- If you want to use the deleted phonewith the audio system again, pairingprocedure must be completed oncemore.1. Press button to enter SETUPmode.2. Select “Phone”, then “Delete”inPHONE menu.3. Select desired phone name from the listshown.• Changing PriorityIf several phones are paired with theaudio system, the system attempts toconnect following order when theBluetooth®system is enabled:1) “Priority” checked phone.2) Previously connected phone3) Gives up auto connection.1. Press button to enter SETUPmode.2. Select “Phone”, then “Priority”inPHONE menu.3. Select desired phone name from thelist shown.SETUPSETUPSETUPSETUP

419Knowing your vehicle• Turning Bluetooth®ON/OFFBluetooth®system can be enabled (ON)or disabled (OFF) by this menu.- If Bluetooth®is disabled, all the com-mands related to Bluetooth®systemprompts whether you wish to turnBluetooth®ON or not.1. Press button to enter SETUPmode.2. Select “Phone”, then “BT Off”inPHONE menu.■Receiving a Phone CallWhen receiving a phone call, a ringtoneis audible from speakers and the audiosystem changes into telephone mode.When receiving a phone call, “Incoming”message and incoming phone number (if available) are displayed on the audio.• To Answer a Call:- Press button on the steering wheel.• To Reject a Call:- Press button on the steering wheel.• To Adjust Ring Volume:- Use VOLUME buttons on the steeringwheel.• To Transfer a Call to the Phone(PrivateCall):- Press and hold button on thesteering wheel until the audio systemtransfers a call to the phone.■Talking on the PhoneWhen talking on the phone, “Active Calls”message and the other party’s phonenumber (if available) are displayed on theaudio.• To Mute the Microphone- Press button on the steeringwheel.• To Finish a Call- Press button on the steering wheel.■Making a Phone CallA Call Back can be made by pressingbutton on the steering wheel.- This is the same function as using thebutton solely on the cellular phone.NOTE:Some phone models require pressingbutton twice to make a call.MUTESETUP

Navigation menu