HUIZHOU GAOSHENGDA TECHNOLOGY WCT1B Module User Manual

Hui Zhou Gaoshengda Technology Co.,LTD Module Users Manual

user manual

Hui Zhou Gaoshengda Technology Co., LTD WCT1BR2201D/WCT1BR2701TPAGE 1 OF 3Version 1.0WIFI+BT ModuleIEEE 802.11 a/b/g/n/ac 2T/2RModel Number: WCT1BR2201D/WCT1BR2701TProduct DescritionThe WCT1BR2201D/WCT1BR2701Tis a complete dual-band(2.4GHz and 5GHz)WIFI 2×2 MIMO module. This moduleprovides a high level of integration with a dual-stream IEEE 802.11ac MAC/ base band /radio and Bluetooth4.2+HS.The WLAN operation supports 20MHz,40MHz and 80MHz channels for data rates up to 866.7Mbps. It fullycomplies with IEEE 802.11 a/b/g/n/ac feature rich wireless connectivity at high standards,deliversreliable,cost-effective, throughput from an extended distance.Product FeaturesProduct SpecificationModelWIF+BT ModuleProduct NameWCT1BR2201D/WCT1BR2701TStandard802.11 a /b/g/n/acInterfaceUSBData Transfer Rate1,2,5.5,6,11,12,18,22,24,30,36,48,54,60,90,120 and maximum of 866.7MbpsModulation MethodGFSK,π/4-DQPSK,8DPSK(bluetooth)DQPSK,DBPSK,CCK(802.11b)QPSK,BPSK,16QAM,64QAM with OFDM (802.11g)QPSK,BPSK,16QAM,64QAM with OFDM (802.11n)QPSK,BPSK,16QAM,64QAM with OFDM (802.11a)QPSK,BPSK,16QAM,64QAM,256QAM with OFDM (802.11ac)Frequency BandBLUETOOTH2402~2480 MHzWIFI2.4G: 2412~2462 MHz5G: 5150~5250MHz,5725~5850MHzOperation ModeInfrastructureSecurityWEP, TKIP, AES, WPA, WPA2Operating Voltage3.3V±10%Current Consumption＜1000mAAntenna TypePIFAOperating Temperature0 ~ 60°C ambient temperatureStorage Temperature-40 ~ 80°C ambient temperatureHumidity5 to 95 % maximum (non-condensing)◆Complies with IEEE 802.11b/g/n for 2.4GHz and IEEE 802.11a/n/ac 5GHz Wireless LAN.◆Bluetooth v4.2+HS◆Two transmit and Two receive path(2T2R)◆Works with all existing network nfrastructure.◆Capable of up to 128-Bit WEP Encryption.◆Freedom to roam while staying connected.◆UP to 866.7 Mbps High-Speed Transfer Rate in 802.11ac mode of operation.◆Operating Systems：Linux,Win7, Win8, Win10,XP◆Low power consumption.◆Easy to install and configure.◆High speed USB 2.0 interface
Hui Zhou Gaoshengda Technology Co., LTD WCT1BR2201D/WCT1BR2701TPAGE 2 OF 3Version 1.0NOTICE:◆please keep this product and accessories attached to the places which children can't touch;◆do not splash water or other liquid onto this product, otherwise it may cause damage;◆do not put this product near the heat source or direct sunlight, otherwise it may causedeformation◆or malfunction;◆please keep this product away from flammable or naked flame;◆please do not repair this product by yourself. Only qualified personnel can be repaired.FCC StatementThis equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonableprotection against harmful interference in a residential installation. This equipmentgenerates, uses and can radiate radio frequency energy and, if not installed and used inaccordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, whichcan be determined by turning the equipment off and on, the user is encouraged to try tocorrect the interference by one or more of the following measures:-Reorient or relocate the receiving antenna.-Increase the separation between the equipment and receiver.-Connect the equipment into an outlet on a circuit different from that to which the receiveris connected.-Consult the dealer or an experienced radio/TV technician for help.This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolledenvironment.This equipment complies with Part 15 of the FCC Rules. Operation is subject to the followingtwo conditions:(1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may causeundesired operation.Any changes or modifications not expressly approved by the party responsible for compliancecould void the user’s authority to operate the equipment.Please notice that if the FCC identification number is not visible when the module isinstalled inside another device, then the outside of the device into which the module isinstalled must also display a label referring to the enclosed module. This exterior labelcan use wording such as the following: “Contains FCC ID:2AC23-WCT1B” any similar wordingthat expresses the same meaning may be used.This equipment complies with FCC radiation exposure limits set forth for an uncontrolledenvironment. This equipment should be installed and operated with a minimum distance of20cm between the radiator & your body. This transmitter must not be co-located or operatingin conjunction with any other antenna or transmitter.
Hui Zhou Gaoshengda Technology Co., LTD WCT1BR2201D/WCT1BR2701TPAGE 3 OF 3Version 1.0The module is limited to OEM installation ONLY.The OEM integrator is responsible for ensuring that the end-user has no manual instructionto remove or install module.The module is limited to installation in mobile application.A separate approval is required for all other operating configurations, including portableconfigurations with respect to Part 2.1093 and difference antenna configurations.There is requirement that the grantee provide guidance to the host manufacturer forcompliance with Part 15B requirements.Canada StatementThis device complies with Industry Canada’s licence-exempt RSSs. Operation is subject tothe following two conditions:(1) This device may not cause interference; and(2) This device must accept any interference, including interference that may causeundesired operation of the device.Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radioexempts de licence. L’exploitation est autorisée aux deux conditions suivantes :(1) l’appareil ne doit pas produire de brouillage;(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, mêmesi le brouillage est susceptible d’en compromettre le fonctionnement.Please notice that if the ISED certification number is not visible when the module isinstalled inside another device, then the outside of the device into which the module isinstalled must also display a label referring to the enclosed module. This exterior labelcan use wording such as the following: “Contains IC:12290A-CT1B” any similar wording thatexpresses the same meaning may be used.l'appareil hôte doit porter une étiquette donnant le numéro de certification du moduled'Industrie Canada, précédé des mots « Contient un module d'émission », du mot «IC:12290A-CT1B » ou d'une formulation similaire exprimant le même sens, comme suitThe device for operation in the band 5150-5250 MHz is only for indoor use to reduce thepotential for harmful interference to co-channel mobile satellite systemsfor devices with detachable antenna(s), the maximum antenna gain permitted for devices inthe band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p.limits as appropriate;Les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour uneutilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable auxsystèmes de satellites mobiles utilisant les mêmes canaux;pour les dispositifs munis d'antennes amovibles, le gain maximal d'antenne permis (pourles dispositifs utilisant la bande de 5 725 à 5 850 MHz) doit être conforme à la limitede la p.i.r.e. spécifiée, selon le cas;

Navigation menu