HUIZHOU GAOSHENGDA TECHNOLOGY WC0HR2601 WIFI Module User Manual Users manual

Hui Zhou Gaoshengda Technology Co.,LTD WIFI Module Users manual

Contents

Users manual

PRODUCT SPECIFICATION Version 1.0 IEEE 802.11 a/b/g/n/ac 2T/2R Band USB2.0 Module Model Number: WC0HR2601 ( REALTEK RTL8812BU ) 2.4G channel： 1-13 5G channel： 36-48 149-165 （MAC address from GSD） 惠 州 高 盛 达 科 技 有 限 公 司 HUIZHOU GAOSHENGDA TECHNOLOGY CO., LTD 中国惠州仲恺高新技术开发区华宇路 75 号 HUA YU RD., NO.75, ZHONGKAI HIGH-TECH DEVELOPMENT AREA, HUIZHOU, CHINA TEL：（0752）2096932 E-mail： gaoz@gaosd.cn 拟制 DESIGN 审核 CHECK 批准 APPROVAL 高照 陈宇科 熊运自 2016.09.26 2016.09.26 2016.09.26 客户认可 Custom Approval Section Custom Name Department Approval Date：
PRODUCTS SPECIFICATION PAGE 2 OF 10 WC0HR2601 Version 1.0 Document revision history Revision Date Approved by Remarks Version 1.0 2016-09-26 Draft
PRODUCTS SPECIFICATION PAGE 3 OF 10 WC0HR2601 Version 1.0 1. General Description This document is to specify the product requirements for 802.11a/b/g/n/ac and Bluetooth USB Module. This Card is based on REALTEK RTL8812BU chipset .It is a complete dual-band(2.4GHz and 5GHz)WIFI 2×2 MIMO MAC/PHY/Radio System-on-a-Chip. This module provides a high level of integration with a dual-stream IEEE 802.11ac MAC/ base band /radio.The WLAN operation supports 20MHz,40MHz and 80MHz channels for data rates up to 866.7Mbps. It is also backward complied with IEEE 802.11a standard from 5.15~5.825GHz wideband and IEEE 802.11b/g standard from 2.4~2.5GHz. It can be used to provide up to 54Mbps for IEEE 802.11a and IEEE 802.11g, 11Mbps for IEEE 802.11b and 300Mbps for IEEE 802.11n. With seamless roaming, fully interoperability and advanced security with WEP standard, 802.11 a/b/g/n/ac USB2.0 Module offers absolute interoperability with different vendors 802.11a/b/g/n/ac. Access Points through the wireless LAN. 2. Features  Compatible with IEEE 802.11b standard to provide wireless 11Mbps data rate.  Compatible with IEEE 802.11g standard to provide wireless 54Mbps data rate.  Compatible with IEEE 802.11a standard to provide wireless 54Mbps data rate.  Compatible with IEEE 802.11n standard to provide wireless 300Mbps data rate.  Compatible with IEEE 802.11ac standard to provide wireless 866.7Mbps data rate.  Operation at 2.4~2.5GHz and 5.15~5.825GHz frequency band to meet worldwide regulations  Provides simple legacy and 20MHz/40MHz/80MHz co-existence mechanisms to ensure backward and network compatibility.  Supports infrastructure networks via Access Point and ad-hoc network via peer-to-peer communication  Supports IEEE 802.11i (WPA and WPA2),WAPI,. enhanced security  Friendly user configuration and diagnostic utilities  Drivers support Win10,Win8,Win7,XP,Linux  High speed USB 2.0 interface  ROHS compliant
PRODUCTS SPECIFICATION PAGE 4 OF 10 WC0HR2601 Version 1.0 3. Application Diagrams 3.1 Functional Block Diagram 3.2 General Requirements 3.2.1 IEEE 802.11b Section Feature Detailed Description 3.2.1.1 Standard ● IEEE 802.11b 3.2.1.2 Radio and Modulation Schemes ● DQPSK , DBPSK , DSSS , and CCK 3.2.1.3 Operating Frequency ● 2400 ～ 2483.5MHz ISM band 3.2.1.4 Channel Numbers ● 11 channels for United States ● 13 channels for Europe Countries ● 14 channels for Japan 3.2.1.5 Data Rate ● 11,5.5,2,and 1Mbps 3.2.1.6 Media Access Protocol ● CSMA/CA with ACK 3.2.1.7 Transmitter Output Power at Antenna Connector ● Typical RF Output Power (tolerance±2dB) at each RF chain, Data Rate and at room Temp. 25 degree C ● 19 dBm at 1Mbps ● 16 dBm at 11Mbps 3.2.1.8 Receiver Sensitivity at Antenna Connector ● Typical Sensitivity at Which Frame(1000-byte PDUs)Error Rate=8% ● -88 dBm at 1Mbps ● -82 dBm at 11Mbps
PRODUCTS SPECIFICATION PAGE 5 OF 10 WC0HR2601 Version 1.0 3.2.2 IEEE 802.11g Section Feature Detailed Description 3.2.2.1 Standard ● IEEE 802.11g 3.2.2.2 Radio and Modulation Type ● QPSK , BPSK , 16QAM ,64QAM with OFDM 3.2.2.3 Operating Frequency ● 2400 ～ 2483.5MHz ISM band 3.2.2.4 Channel Numbers ● 11 channels for United States ● 13 channels for Europe Countries ● 13 channels for Japan 3.2.2.5 Data Rate ● 6,9,12,18,24,36,48,54Mbps 3.2.2.6 Media Access Protocol ● CSMA/CA with ACK 3.2.2.7 Transmitter Output Power at Antenna Connector ● Typical RF Output Power(tolerance±2dB) at each RF chain, Data Rate and at room Temp. 25degree C ● +18 dBm at 6Mbps ● +14 dBm at 54Mbps 3.2.2.8 Receiver Sensitivity at Antenna Connector ● Typical Sensitivity at each RF chain. Frame(1000-byte PDUs)Error Rate<10% at room Temp 25 degree C ● -86 dBm at 6Mbps ● -73 dBm at 54Mbps 3.2.3 IEEE 802.11a Section Feature Detailed Description 3.2.3.1 Standard ● IEEE 802.11a 3.2.3.2 Radio and Modulation Type ● QPSK , BPSK , 16QAM ,64QAM with OFDM 3.2.3.3 Operating Frequency ● 5.15~5.35GHz and 5.725~5.825GHz for US and Canada ● 5.15~5.35GHz and 5.47~5.725GHz for Japan ● 5.15~5.35GHz and 5.47~5.725GHz for Europe ● 5.725~5.825GHz for China 3.2.3.4 Channel Numbers ● 12 non-overlapping channels for US and Canada ● 8 non-overlapping channels for Japan ● 19 non-overlapping channels for Europe ● 4 non-overlapping channels for China 3.2.3.5 Data Rate ● 6,9,12,18,24,36,48,54Mbps 3.2.3.6 Media Access Protocol ● CSMA/CA with ACK 3.2.3.7 Transmitter Output Power at Antenna Connector ● Typical RF Output Power(tolerance±2dB) at each RF chain, Data Rate and at room Temp. 25degree C ● +18 dBm at 6Mbps ● +14dBm at 54Mbps 3.2.3.8 Receiver Sensitivity at Antenna Connector ● Typical Sensitivity at each RF chain. Frame(1000-byte PDUs)Error Rate<10% at room Temp 25 degree C ● -86 dBm at 6Mbps ● -73 dBm at 54Mbps
PRODUCTS SPECIFICATION PAGE 6 OF 10 WC0HR2601 Version 1.0 3.2.4 IEEE 802.11n Section Feature Detailed Description 3.2.4.1 Standard ● IEEE 802.11n 3.2.4.2 Radio and Modulation Type ● BPSK , QPSK , 16QAM ,64QAM with OFDM 3.2.4.3 Operating Frequency ● 2.4GHz band:2400 ~ 2483.5MHz ● 5GHz and:5150 ~ 5825MHZ 3.2.4.4 Data Rate GI=800ns GI=400ns MCS 20MHz 40MH 20MHz 40MHz 0 6.5 13.5 7.2 15 1 13 27 14.4 30 2 19.5 40.5 21.7 45 3 26 54 28.9 60 4 39 81 43.3 90 5 52 108 57.8 120 6 58.5 121.5 65.0 135 7 65 135 72.2 150 8 13 27 14.444 30 9 26 54 28.889 60 10 39 81 43.333 90 11 52 108 57.778 120 12 78 162 86.667 180 13 104 216 115.556 240 14 117 243 130.000 170 15 130 270 144.444 300 3.2.4.5 Media Access Protocol ● CSMA/CA with ACK ● Typical RF Output Power (tolerance±2dB) at each RF chain, Data Rate and at room Temp. 25 degree C ● 2.4GHz Band/HT20 ● 18 dBm at MCS0 ● 12 dBm at MCS7 ● 2.4GHz Band/HT40 ● 18 dBm at MCS0 ● 12 dBm at MCS7 3.2.4.6 Transmitter Output Power at Antenna Connector ● 5GHz Band/HT20 ● 18 dBm at MCS0 ● 12 dBm at MCS7 ● 5GHz Band/HT40 ● 18 dBm at MCS0 ● 12 dBm at MCS7 Typical Sensitivity at each RF chain at Which Frame(1000-byte PDUs)Error Rate=10% and at room Temp.25 degree C 2.4GHz Band/HT20 ● -86 dBm at MCS0 ● -70 dBm at MCS7 2.4GHz Band/HT40 ● -83 dBm at MCS0 ● -66 dBm at MCS7 3.2.4.7 Receiver Sensitivity at Antenna Connector 5GHz Band/HT20 ● -86 dBm at MCS0 ● -71 dBm at MCS7 5GHz Band/HT40 ● -83 dBm at MCS0 ● -67 dBm at MCS7
PRODUCTS SPECIFICATION PAGE 7 OF 10 WC0HR2601 Version 1.0 3.2.5 IEEE 802.11ac Section Feature Detailed Description 3.2.5.1 Standard ● IEEE 802.11ac 3.2.5.2 Radio and Modulation Type ● QPSK , BPSK , 16QAM ,64QAM,256QAM with OFDM 3.2.5.3 Operating Frequency ● 5.15~5.35GHz and 5.725~5.825GHz for US and Canada ● 5.15~5.35GHz and 5.47~5.725GHz for Japan ● 5.15~5.35GHz and 5.47~5.725GHz for Europe ● 5.725~5.825GHz for China 3.2.5.4 Channel Numbers ● 12 non-overlapping channels for US and Canada ● 8 non-overlapping channels for Japan ● 19 non-overlapping channels for Europe ● 4 non-overlapping channels for China 3.2.5.5 Data Rate ● at most 866.7 Mbps 3.2.5.6 Media Access Protocol ● CSMA/CA with ACK ● Typical RF Output Power(tolerance±2dB) at each RF chain, Data Rate and at room Temp. 25degree C HT20 ● 18 dBm at MCS0 ● 12 dBm at MCS7 ● 11 dBm at MCS8 HT40 ● 18 dBm at MCS0 ● 12 dBm at MCS8 ● 11 dBm at MCS9 3.2.5.7 Transmitter Output Power at Antenna Connector HT80 ● 18 dBm at MCS0 ● 12 dBm at MCS8 ● 11 dBm at MCS9 3.2.5.8 Receiver Sensitivity at Antenna Connector ● Typical Sensitivity at each RF chain. Frame(1000-byte PDUs)Error Rate<10% at room Temp 25 degree C 5GHz Band / HT20 ● -64dBm at MCS8 5GHz Band / HT40 ● -61dBm at MCS9 5GHz Band / HT80 ● -58dBm at MCS9
PRODUCTS SPECIFICATION PAGE 8 OF 10 WC0HR2601 Version 1.0 4. Electrical and Thermal Characteristics 4.1 Environmental Requirements Parameter Minimum Maximum Units Storage Temperature -40 +80 ℃ Ambient Operating Temperature 0 60 ℃ Junction Temperature 0 125 ℃ 4.2 General Section Feature Detailed Description 5.2.1 Antenna Type ● WIFI ANT :PIFA Antenna and IPEX 5.2.2 Operating Voltage ● 3.3 V±10% 5.2.3 Current Consumption ● ＜1000mA 5.2.4 Form Factor and Interface ● High Speed USB2.0 Interface 4.3 Software Driver Win10,Win8,Win7, XP, Linux, MAC Security 64/128-bits WEP, WPA, WPA2 4.4 Mechanical Dimensions Feature Detailed Description 4.4.1 Length ● 47mm 4.4.2 Width ● 30mm 4.4.3 Height ● 7.0mm(PCB 1.0mm)
PRODUCTS SPECIFICATION PAGE 9 OF 10 WC0HR2601 Version 1.0 5 Connector Definition 10-Pin 1.25 mm connector（Horizontal Type） Pin 1 3 3 4 5 6 7 8 9 10 Definition 3.3V 3.3V D- D+ GND WOWn RST GND NC GND 6 Mechanical Dimensions Note1: The below is left-off-board ANT diagram Note2:TOLERANCES ARE +/-0.5mm UNLESS OTHERWISE SPECIFIED * UNITE :mm
PRODUCTS SPECIFICATION PAGE 10 OF 10 WC0HR2601 Version 1.0 Appendix 1 : SMT connector GH-10AWB-GF This is the N pin connector which is in common use. You can select 10 pins according to your requirement.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved by the party. Responsible for compliance could void the user’s authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices). This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement: The equipment complies with FCC Radiation exposure limits set forth foruncontrolled enviroment. This equipment should be installed and operated withminimum distance 20cm between the radiator and your body. .

Navigation menu