HTC PG58110 SMARTPHONE User Manual 2

HTC Corporation SMARTPHONE Users Manual 2

Users Manual 2

Safety and regulatory guide
2 Safety and regulatory guidePlease read before proceedingTHE BATTERY IS NOT FULLY CHARGED WHEN YOU TAKE IT OUT OF THE BOX.DO NOT REMOVE THE BATTERY PACK WHEN THE PHONE IS CHARGING.YOUR WARRANTY IS INVALIDATED IF YOU DISASSEMBLE OR ATTEMPT TO DISASSEMBLE THE DEVICE.Privacy restrictionsSome countries require full disclosure of recorded telephone conversations, and stipulate that you must inform the person with whom you are speaking that the conversation is being recorded. Always obey the relevant laws and regulations of your country when using the recording feature of your phone.DisclaimersANY WEATHER, STOCK, OR OTHER INFORMATION, DATA, OR DOCUMENTATION (“ACCESSED INFORMATION”) ARE PROVIDED “AS IS” AND WITHOUT ANY WARRANTY OR ANY TECHNICAL SUPPORT. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, HTC AND ITS AFFILIATES expressly disclaim any and all representations and warranties, arising by law or otherwise, related to the Accessed Information, including without limitation any express or implied representation or warranty of merchantability, fitness for a particular purpose, non-infringement, quality, accuracy, completeness, effectiveness, reliability, or usefulness. Without limiting the foregoing, it is further understood that HTC and its Affiliates are not responsible for any use of the Accessed Information or the results arising from such use, and that you use such information at your own risk.
Safety and regulatory guide 3 Limitation of damagesTO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL HTC OR ITS AFFILIATES BE LIABLE TO YOU, ANY USER, OR THIRD PARTY FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR PUNITIVE DAMAGES OF ANY KIND, ARISING IN CONTRACT, TORT, OR OTHERWISE, INCLUDING, BUT NOT LIMITED TO, INJURY, LOSS OF REVENUE, LOSS OF GOODWILL, LOSS OF BUSINESS OPPORTUNITY, LOSS OF DATA, AND/OR LOSS OF PROFITS, REGARDLESS OF THE FORESEEABILITY THEREOF OR WHETHER HTC OR ITS AFFILIATES HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. AND IN NO EVENT SHALL THE TOTAL LIABILITY OF HTC OR ITS AFFILIATES EXCEED THE AMOUNT RECEIVED FROM YOU, REGARDLESS OF THE LEGAL THEORY UNDER WHICH THE CAUSE OF ACTION IS BROUGHT. THE FOREGOING DOES NOT AFFECT ANY STATUTORY RIGHTS WHICH MAY NOT BE DISCLAIMED.Important health information and safety precautionsWhen using this product, the safety precautions below must be taken to avoid possible legal liabilities and damages.Retain and follow all product safety and operating instructions. Observe all warnings in the operating instructions on the product.To reduce the risk of bodily injury, electric shock, fire, and damage to the equipment, observe the following precautions.Electrical safetyThis product is intended for use when supplied with power from the designated battery or power supply unit. Other usage may be dangerous and will invalidate any approval given to this product.Safety precautions for proper grounding installationCAUTION: Connecting to improperly grounded equipment can result in an electric shock to your device.This product is equipped with a USB Cable for connecting with desktop or notebook computer. Be sure your computer is properly grounded (earthed) before connecting this product to the computer. The power supply cord of a desktop or notebook computer has an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet which is properly installed and grounded in accordance with all local codes and ordinances.
4 Safety and regulatory guideSafety precautions for power supply unitUse the correct external power sourceA product should be operated only from the type of power source indicated on the electrical ratings label. If you are not sure of the type of power source required, consult your authorized service provider or local power company. For a product that operates from battery power or other sources, refer to the operating instructions that are included with the product.This product should be operated only with the following designated power supply unit(s).AC adapter:HTC, Model TC U250, TC E250, TC B250, TC C250, TC A250,TC K250Handle battery packs carefullyThis product contains a Lithium-ion polymer or Lithium-ion battery. There is a risk of fire and burns if the battery pack is handled improperly. Do not attempt to open or service the battery pack. Do not disassemble, crush, puncture, short external contacts or circuits, dispose of in fire or water, or expose a battery pack to temperatures higher than 60˚C (140˚F). WARNING: Danger of explosion if battery is incorrectly replaced. To reduce risk of fire or burns, do not disassemble, crush, puncture, short external contacts, expose to temperature above 60° C (140° F), or dispose of in fire or water. Replace only with specified batteries. Recycle or dispose of used batteries according to the local regulations or reference guide supplied with your product. NOTE: This product should be operated only with the following designated Battery Pack(s).HTC, Model BG58100 Take extra precautionsKeep the battery or device dry and away from water or any liquid as it may cause a short circuit. ••
Safety and regulatory guide 5 Keep metal objects away so they don’t come in contact with the battery or its connectors as it may lead to short circuit during operation. The phone should only be connected to products that bear the USB-IF logo or have completed the USB-IF compliance program.Do not use a battery that appears damaged, deformed, or discolored, or the one that has any rust on its casing, overheats, or emits a foul odor. Always keep the battery out of the reach of babies and small children, to avoid swallowing of the battery. Consult the doctor immediately if the battery is swallowed. If the battery leaks: Do not allow the leaking fluid to come in contact with skin or clothing. If already in contact, flush the aected area immediately with clean water and seek medical advice. Do not allow the leaking fluid to come in contact with eyes. If already in contact, DO NOT rub; rinse with clean water immediately and seek medical advice. Take extra precautions to keep a leaking battery away from fire as there is a danger of ignition or explosion. Users have to use the connection to USB interfaces with USB 2.0 version or higher.Safety precautions for direct sunlightKeep this product away from excessive moisture and extreme temperatures. Do not leave the product or its battery inside a vehicle or in places where the temperature may exceed 60°C (140°F), such as on a car dashboard, window sill, or behind a glass that is exposed to direct sunlight or strong ultraviolet light for extended periods of time. This may damage the product, overheat the battery, or pose a risk to the vehicle.Prevention of hearing lossCAUTION: Permanent hearing loss may occur if earphones or headphones are used at high volume for prolonged periods of time.NOTE: For France, Earphone (listed below) for this device have been tested to comply with the Sound Pressure Level requirement laid down in the applicable NF EN 50332-1:2000 and/or NF EN 50332-2:2003 standards as required by French Article L. 5232-1.Earphone, manufactured by HTC, Model RC E160.••••••••••
6 Safety and regulatory guideSafety in aircraftDue to the possible interference caused by this product to an aircraft’s navigation system and its communications network, using this device’s phone function on board an airplane is against the law in most countries. If you want to use this device when on board an aircraft, remember to turn off your phone by switching to Airplane Mode.Environment restrictionsDo not use this product in gas stations, fuel depots, chemical plants or where blasting operations are in progress, or in potentially explosive atmospheres such as fuelling areas, fuel storehouses, below deck on boats, chemical plants, fuel or chemical transfer or storage facilities, and areas where the air contains chemicals or particles, such as grain, dust, or metal powders. Please be aware that sparks in such areas could cause an explosion or fire resulting in bodily injury or even death.Explosive atmospheresWhen in any area with a potentially explosive atmosphere or where flammable materials exist, the product should be turned off and the user should obey all signs and instructions. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Users are advised not to use the equipment at refueling points such as service or gas stations, and are reminded of the need to observe restrictions on the use of radio equipment in fuel depots, chemical plants, or where blasting operations are in progress. Areas with a potentially explosive atmosphere are often, but not always, clearly marked. These include fueling areas, below deck on boats, fuel or chemical transfer or storage facilities, and areas where the air contains chemicals or particles, such as grain, dust, or metal powders.Road safetyFull attention must be given to driving at all times in order to reduce the risk of an accident. Using a phone while driving (even with a hands free kit) causes distraction and can lead to an accident. You must comply with local laws and regulations restricting the use of wireless devices while driving.Limiting exposure to radio frequency (RF) fieldsFor individuals concerned about limiting their exposure to RF fields, the World Health Organisation (WHO) provides the following advice:
Safety and regulatory guide 7 Precautionary measures: Present scientific information does not indicate the need for any special precautions for the use of mobile phones. If individuals are concerned, they might choose to limit their own or their children’s RF exposure by limiting the length of calls, or using ‘hands-free’ devices to keep mobile phones away from the head and body.Further information on this subject can be obtained from the WHO home page http://www.who.int/peh-emf Who Fact sheet 193: June 2000.Safety precautions for RF exposureAvoid using your phone near metal structures (for example, the steel frame of a building).Avoid using your phone near strong electromagnetic sources, such as microwave ovens, sound speakers, TV and radio.Use only original manufacturer-approved accessories, or accessories that do not contain any metal.Use of non-original manufacturer-approved accessories may violate your local RF exposure guidelines and should be avoided.Exposure to radio frequency (RF) signalsYour device contains a radio transmitter and receiver. When it is ON, it receives and transmits RF energy. When you communicate with your phone, the system handling your call controls the power level at which your phone transmits.The radiated output power is far below the international radio frequency exposure limits. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on the safety standards previously set by international standards bodies: American National Standards Institute (ANSI) IEEE. C95.1-1992National Council on Radiation Protection and Measurement (NCRP). Report 86. 1986International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1996 Ministry of Health (Canada), Safety Code 6. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health.Your mobile device is designed not to exceed the limits for exposure to radio waves recommended by international guidelines. These guidelines were developed by the independent scientific organisation ICNIRP and include safety margins designed to assure the protection of all persons regardless of age and health.
8 Safety and regulatory guideThe guidelines use a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit for mobile devices is 2 W/kg and the highest SAR value for this device when tested at the ear was 0.362 W/kg@10g*.As mobile devices offer a range of functions, they can be used in other positions, such as on the body as described in this user guide**.As SAR is measured utilising the device’s highest transmitting power, the actual SAR of this device while operating is typically below that indicated above. This is due to automatic changes to the power level of the device to ensure it only uses the minimum power required to communicate with the network.*The tests are carried out in accordance with IEC standard PT62209-1**Please see the following section about body worn operationAs with other mobile radio transmitting equipment, users are advised that for satisfactory operation of the equipment and for the safety of personnel, it is recommended that no part of the human body be allowed to come too close to the antenna during operation of the equipment.Your device has an internal antenna. Use only the supplied integral antenna. Use of unauthorised or modified antennas may impair call quality and damage the phone, causing loss of performance and SAR levels exceeding the recommended limits as well as result in non-compliance with local regulatory requirements in your country.To assure optimal phone performance and ensure human exposure to RF energy is within the guidelines set forth in the relevant standards; always use your device only in its normal-use position. Do not touch or hold the antenna area unnecessarily when placing or receiving a phone call. Contact with the antenna area may impair call quality and cause your device to operate at a higher power level than needed. Avoiding contact with the antenna area when the phone is IN USE optimises the antenna performance and the battery life.Body-worn OperationThis device was tested for typical body-worn operations. A minimum separation distance must be maintained between the user’s body and the handset, including the antenna:1 cm to comply with the RF exposure requirements in the U.S.1.5 cm to comply with the RF exposure requirements in Europe
Safety and regulatory guide 9 Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna. Unauthorized antennas, modifications, or attachments could impair call quality, damage the phone, or result in violation of regulations. Do not use the phone with a damaged antenna. If a damaged antenna comes into contact with the skin, a minor burn may result. Please contact your local dealer for replacement antenna.SAR information0.362 W/kg@10g (head), 0.592 W/kg@10g (body) *0.548 W/kg@1g (head), 1.37 W/kg@1g (body)*** NOTE: The 10g SAR value is measured at GSM/GPRS/EGPRS 900/1800 MHz and WCDMA/HSDPA/HSUPA Band I. The Body SAR value of 0.592 W/kg@10g has been tested with back of the device kept at 1.5 cm away from the body.** NOTE: The 1g SAR value is measured at GSM/GPRS/EGPRS 850/1900 MHz and WCDMA/HSDPA/HSUPA Band II & Band V. The Body SAR value of 1.37 W/kg@1g has been tested with back of the device kept at 1 cm away from the body.Interference in carsPlease note that because of possible interference to electronic equipment, some vehicle manufacturers forbid the use of mobile phone in their vehicles unless a handsfree kit with an external antenna is included in the installation.Interference with medical equipment functionsThis product may cause medical equipment to malfunction. The use of this device is forbidden in most hospitals and medical clinics.If you use any other personal medical device, consult the manufacturer of your device to determine if they are adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this information.Turn your phone OFF in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.
10 Safety and regulatory guideHearing aidsSome digital wireless phones may interfere with some hearing aids. In the event of such interference, you may want to consult your service provider, or call the customer service line to discuss alternatives.Nonionizing radiationYour device has an internal antenna. This product should be operated in its normal-use position to ensure the radiative performance and safety of the interference. As with other mobile radio transmitting equipment, users are advised that for satisfactory operation of the equipment and for the safety of personnel, it is recommended that no part of the human body be allowed to come too close to the antenna during operation of the equipment.Use only the supplied integral antenna. Use of unauthorized or modified antennas may impair call quality and damage the phone, causing loss of performance and SAR levels exceeding the recommended limits as well as result in non-compliance with local regulatory requirements in your country.To assure optimal phone performance and ensure human exposure to RF energy is within the guidelines set forth in the relevant standards, always use your device only in its normal-use position. Contact with the antenna area may impair call quality and cause your device to operate at a higher power level than needed. Avoiding contact with the antenna area when the phone is IN USE optimizes the antenna performance and the battery life. Antenna locationElectrical safetyAccessoriesUse only approved accessories.Do not connect with incompatible products or accessories.Take care not to touch or allow metal objects, such as coins or key rings, to contact or short-circuit the battery terminals.•••
Safety and regulatory guide 11 Connection to a carSeek professional advice when connecting a phone interface to the vehicle electrical system.Faulty and damaged productsDo not attempt to disassemble the phone or its accessory.Only qualified personnel must service or repair the phone or its accessory. General precautionsYou alone are responsible for how you use your phone and any consequences of its use. You must always switch off your phone wherever the use of a phone is prohibited. Use of your phone is subject to safety measures designed to protect users and their environment.Avoid applying excessive pressure to the deviceDo not apply excessive pressure on the screen and the device to prevent damaging them and remove the device from your pants’ pocket before sitting down. It is also recommended that you store the device in a protective case and only use the device stylus or your finger when interacting with the touch screen. Cracked display screens due to improper handling are not covered by the warranty.Device getting warm after prolonged useWhen using your device for prolonged periods of time, such as when you’re talking on the phone, charging the battery or browsing the Web, the device may become warm. In most cases, this condition is normal and therefore should not be interpreted as a problem with the device.Heed service markingsExcept as explained elsewhere in the Operating or Service documentation, do not service any product yourself. Service needed on components inside the device should be done by an authorized service technician or provider.Protect your phoneAlways treat your phone and its accessories with care and keep them in a clean and dust-free place.Do not expose your phone or its accessories to open flames or lit tobacco products.Do not expose your phone or its accessories to liquid, moisture or high humidity.Do not drop, throw or try to bend your phone or its accessories.••••••
12 Safety and regulatory guideDo not use harsh chemicals, cleaning solvents, or aerosols to clean the device or its accessories.Do not paint your phone or its accessories.Do not attempt to disassemble your phone or its accessories, only authorised personnel must do so.Do not expose your phone or its accessories to extreme temperatures, minimum -20 and maximum 50 degrees Celsius.Please check local regulations for disposal of electronic products.Do not carry your phone in your back pocket as it could break when you sit down.Damage requiring serviceUnplug the product from the electrical outlet and refer servicing to an authorized service technician or provider under the following conditions:Liquid has been spilled or an object has fallen into the product.The product has been exposed to rain or water.The product has been dropped or damaged.There are noticeable signs of overheating.The product does not operate normally when you follow the operating instructions.Avoid hot areasThe product should be placed away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.Avoid wet areasNever use the product in rain, or near washbasins or other wet locations. If your product gets wet, do not try to dry the product with the use of an oven or dryer, as this may damage your product.Avoid using your device after a dramatic change in temperatureWhen you move your device between environments with very different temperature and/or humidity ranges, condensation may form on or within the device. To avoid damaging the device, allow sufficient time for the moisture to evaporate before using the device.NOTICE: When taking the device from low-temperature conditions into a warmer environment or from high-temperature conditions into a cooler environment, allow the device to acclimate to room temperature before turning on power.•••••••••••
Safety and regulatory guide 13 Avoid pushing objects into productNever push objects of any kind into cabinet slots or other openings in the product. Slots and openings are provided for ventilation. These openings must not be blocked or covered.Air bagsDo not place a phone in the area over an air bag or in the air bag deployment area. Store the phone safely before driving your vehicle.Mounting accessoriesDo not use the product on an unstable table, cart, stand, tripod, or bracket. Any mounting of the product should follow the manufacturer’s instructions, and should use a mounting accessory recommended by the manufacturer.Avoid unstable mountingDo not place the product with an unstable base. Use product with approved equipmentThis product should be used only with personal computers and options identified as suitable for use with your equipment.Adjust the volumeTurn down the volume before using headphones or other audio devices.CleaningUnplug the product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning, but NEVER use water to clean the LCD screen. Small childrenDo not leave your phone and its accessories within the reach of small children or allow them to play with it. They could hurt themselves or others, or could accidentally damage the phone. Your phone contains small parts with sharp edges that may cause an injury or which could become detached and create a choking hazard.Repetitive motion injuriesTo minimise the risk of RSI, when Texting or playing games with your phone:Do not grip the phone too tightlyPress the buttons lightlyMake use of the special features in the handset which minimise the number of buttons which have to be pressed, such as message templates and predictive text.Take lots of breaks to stretch and relax. ••••
14 Safety and regulatory guideOperating machineryFull attention must be given to operating the machinery in order to reduce the risk of an accident.Electrostatic discharge (ESD)Do not touch the SIM card’s metal connectors. Loud noiseThis phone is capable of producing loud noises which may damage your hearing.Emergency callsThis phone, like any wireless phone, operates using radio signals, which cannot guarantee connection in all conditions. Therefore, you must never rely solely on any wireless phone for emergency communications.Regulatory agency identificationsFor regulatory identification purposes, your product is assigned a model number of PG58110. FCC ID: NM8PG58110To ensure continued reliable and safe operation of your device, use only the accessories listed below with your PG58110.The Battery Pack has been assigned a model number of BG58100.NOTE: This product is intended for use with a certified Class 2 Limited Power Source, rated 5 Volts DC, maximum 1 Amp power supply unit.European Union noticeProducts with CE marking comply with the R&TTE Directive (99/5/EC), the EMC Directive (2004/108/EC), and the Low Voltage Directive (2006/95/EC) issued by the Commission of the European Community. Compliance with these directives implies conformity to the following European Norms (in parentheses are the equivalent international standards).EN 50360EN 62209-1EN 62311EN 62209-2EN 60950-1EN 50332-1EN 301 489-1EN 301 489-3••••••••
Safety and regulatory guide 15 EN 301 489-7EN 301 489-17EN 301 489-24EN 301 489-34EN 301 511EN 301 908-1EN 301 908-2EN 300 328EN 300 440-1EN 300 440-2This equipment may be operated in:AT BE BG CH CY CZ DE DKEE ES FI FR GB GR HU IEIT IS LI LT LU LV MT NLNO PL PT RO SE SI SK TRFederal Communications Commission notice This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or TV reception, which can be determined by turning the equipment on and off, the user is encouraged to try to correct the interference by one or more of the following measures:Reorient or relocate the receiving antenna. ••••••••••
16 Safety and regulatory guideIncrease the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.Consult the dealer or an experienced radio or television technician for help. Industry Canada StatementThis device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.This Class B digital apparatus complies with Canadian ICES-003.Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.This Category II radiocommunication device complies with Industry Canada Standard RSS-310. Ce dispositif de radiocommunication de catégorie II respecte la norme CNR-310 d’ Industrie Canada.The device could automatically discontinue transmission in case of absence of information to transmit, or operational failure. Note that this is not intended to prohibit transmission of control or signaling information or the use of repetitive codes where required by the technology.IMPORTANT NOTE:IC Radiation Exposure StatementThis EUT is compliance with SAR for general population/uncontrolled exposure limits in IC RSS-102 and had been tested in accordance with the measurement methods and procedures specified in IEEE 1528. This equipment should be installed and operated with minimum distance 1 cm between the radiator & your body.This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.The County Code Selection feature is disabled for products marketed in the US/ Canada.)ModificationsThe FCC requires the user to be notified that any changes or modifications made to the device that are not expressly approved by HTC Corporation may void the user’s authority to operate the equipment.
Safety and regulatory guide 17 FCC RF Radiation Exposure StatementThis Transmitter has been demonstrated co-location compliance requirements with Bluetooth and WLAN. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.Telecommunications & Internet Association (TIA) safety informationPacemakersThe Health Industry Manufacturers Association recommends that a minimum separation of 15 cm (6 inches) be maintained between a handheld wireless phone and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research by and recommendations of Wireless Technology Research. Persons with pacemakers:Should ALWAYS keep the phone more than 15 cm (6 inches) from their pacemaker when the phone is turned ON.Should not carry the phone in a breast pocket.Should use the ear opposite the pacemaker to minimize the potential for interference. If you have any reason to suspect that interference is taking place, turn the phone OFF immediately.Hearing aidsSome digital wireless phones may interfere with some hearing aids. In the event of such interference, you may want to consult your service provider, or call the customer service line to discuss alternatives.WEEE noticeThe Directive on Waste Electrical and Electronic Equipment (WEEE), which entered into force as European law on 13th February 2003, resulted in a major change in the treatment of electrical equipment at end-of-life. The purpose of this Directive is, as a first priority, the prevention of WEEE, and in addition, to promote the reuse, recycling and other forms of recovery of such wastes so as to reduce disposal.
18 Safety and regulatory guide The WEEE logo (shown at the left) on the product or on its box indicates that this product must not be disposed of or dumped with your other household waste. You are liable to dispose of all your electronic or electrical waste equipment by relocating over to the specified collection point for recycling of such hazardous waste. Isolated collection and proper recovery of your electronic and electrical waste equipment at the time of disposal will allow us to help conserving natural resources. Moreover, proper recycling of the electronic and electrical waste equipment will ensure safety of human health and environment. For more information about electronic and electrical waste equipment disposal, recovery, and collection points, please contact your local city center, household waste disposal service, shop from where you purchased the equipment, or manufacturer of the equipment.RoHS complianceThis product is in compliance with Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003, on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS) and its amendments.Products with 2.4–GHz Wireless LAN Devices FranceFor 2.4–GHz wireless LAN operation of this product, certain restrictions apply. This equipment may use the entire–2400–MHz to 2483.5–MHz frequency band (channels 1 through 13) for indoor applications. For outdoor use, only 2400-2454 MHz frequency band (channels 1-9) may be used. For the latest requirements, see http://www.art-telecom.fr.Wireless LAN Module’s Maximum EIRPFrequency Ranges (MHz)Indoors Outdoors2400 MHz ~ 2446.5 MHz10mW Not Permitted2446.5 MHz ~ 2483.5 MHz100mW 100mW on private property with Ministry of Defense approval.
91H0xxxx-xxM Rev.Ahtc.com

Navigation menu