HTC HIMALAYAS Wireless PDA Phone User Manual Andes QSG indd
HTC Corporation Wireless PDA Phone Andes QSG indd
HTC >
Contents
- 1. User Manual Part I
- 2. User Manual Part II
- 3. revised manual page 1 to 14
- 4. revised manual page 14 to 28
revised manual page 14 to 28
![14Using for the First TiemTo use Block Recognizer With Block Recognizer you can input character strokes using the stylus that are similar to those used on other devices. Tap the arrow next to the Input Panel button and then Block Recognizer. Write a letter in the box. When you write a letter, it is converted to typed text that appears on the screen. For specic instructions on using Block Recognizer, with Block Recognizer open, taps the question mark next to the writing area.To switch to Transcriber With Transcriber you can write anywhere on the screen using the stylus just as you would on paper. Unlike Letter Recognizer and Block Recognizer, you can write a sentence or more of information. Then, pause and let Transcriber change the written characters to typed characters. Tap the arrow next to the Input Panel button and then Transcriber. Write anywhere on the screen. For specic instructions on using Transcriber, with Transcriber open, tap the question mark in the lower right hand corner of the screen.11223344](https://usermanual.wiki/HTC/HIMALAYAS.revised-manual-page-14-to-28/User-Guide-400068-Page-1.png)
![17Using for the First TimeTo punctuate in Transcriber Tap the keyboard on the toolbar. Tap OK to hide the keyboard.To see how to write a letter in Transcriber Tap “a” on the toolbar. In the screen that appears, select the letter you want to learn about, and then tap on one of the examples given above. For specic instructions on using Transcriber, with Transcriber open, tap the question mark in the lower right hand corner of the screen. Click on a letter for a demonstrationWrite your rst notes (Cont'd)12213](https://usermanual.wiki/HTC/HIMALAYAS.revised-manual-page-14-to-28/User-Guide-400068-Page-2.png)
![16To make a call from Dialer1 Press Send to enter the Home screen.2 Dial the number you want to call using the keypad.3 If the number or name is already in your contacts list, enter the name or number of the person you want to call. 4 When it appears in the list, scroll to it and press the Talk key.Make Your First Call Using for the First TiemTo make a call from ContactsYou can make a call from Contacts in the following ways :Option 1 Press the Microsoft Contacts Button, nd the contact and then tap the left button twice -- once to send to the dialer screen and once to call.The pop up menu and the left button will by default display Call Work Tel. However, you can customize so that the mobile number or email is displayed instead:Option 2 Select a contact in the contacts list and then press left or right on the navigation pad -- the number on the screen will change.Option 31 In the contacts list, tap the w in the right column next to the contact you want to customize. A pop-up menu will display the phone numbers and email addresses for this contact with a dot next to the priority number.2 In the pop-up menu select a priority -- If you selected mobile number, m should now be in the right column next to the contact.](https://usermanual.wiki/HTC/HIMALAYAS.revised-manual-page-14-to-28/User-Guide-400068-Page-3.png)
![19Write your rst text message or email1 Press Send, tap Tools, and then Send SMS.2 The screen below will appear.3 Tap New.4 In the TO eld, enter either e-mail address or SMS number of one or more recipients, separating them with a semicolon, or select a name from the contact list by tapping the Address Book button. All e-mail addresses entered in the e-mail elds in Contacts appear in the Address Book.5 Compose your message. Tap Send.To enter preset or frequently used message, tap My Text and select a message.Using for the First Time](https://usermanual.wiki/HTC/HIMALAYAS.revised-manual-page-14-to-28/User-Guide-400068-Page-4.png)
![18Set up to access email, WAP and the InternetSetting up your phone for using the Internet, email and WAP is one of the most important things you will have to do. However, once done, you will be able to access a world of information anywhere, all at the touch of a few keys.You can use GPRS to connect to your mobile ISP :1 Obtain the following information from your ISP: ISP server phone number, user name, and password. 2 Tap → Setting → Connections tab → Connections 3 In My ISP, tap Add a new modem connection.4 Create a modem connection. Wireless connections can be made via a mobile phone network or GPRS. If you are using a mobile phone network to connect, in the Select a modem list, tap Cellular Line. If you are using GPRS, tap Cellular Line (GPRS).5 To start the connection, begin using the desired program. For example, switch to Pocket Internet Explorer and browse to a Web page. Your device will automatically connect.n To set up a network card or wireless network connection to your ISP, add a new connection under My Work Network.n To change modem connection settings, in either My ISP or My Work Network, tap Manage existing connections. Select the desired modem connection, tap Settings, and follow the instructions on the screen.To view additional information for any screen in the ward or while changing settings, tap .Using for the First TiemG](https://usermanual.wiki/HTC/HIMALAYAS.revised-manual-page-14-to-28/User-Guide-400068-Page-5.png)
![21Using for the First TimeSetting up your e-mail account1 Prepare your email account details.2 In Inbox on your device, tap Accounts, and then New Account. Follow the directions in the New Account wizard Press Menu, scroll to Options, press Action and then enter E-mail setup.3 To ll you e-mail address in the eld, and then tap Next.4 Enter “Your name”, your “User name” and “Password” then tap Next.5 From the drop down menu select the “Service type” that your email provider supports (POP3 or IMAP4).6 Enter a “Name” for your email account then tap Next 7 Enter the your email provider’s server name information for Incoming mail and Outgoing mail, then tap Finish.For an explanation of a screen, tap and then Help. When nished, to connect to your e-mail server, tap Accounts and then Connect.8 When you have nished, you will see the Set-up Complete screen. Press Finish to save the account. You can repeat the process for as many accounts as you wish to setup.](https://usermanual.wiki/HTC/HIMALAYAS.revised-manual-page-14-to-28/User-Guide-400068-Page-6.png)
![20Using for the First TimeUsing for the First TiemAccessing information using Pocket Internet ExplorerTap and then Internet Explorer.To browse the Internet1 In the address bar that appears at the top of the screen, enter the Web address you want to visit.2 Tap Go to the web address you entered. 3 Tap the Favorites button, and then tap the favorite you want to view. 4 Tap to go back to the Homepage you set.5 Tap to refresh the web page on the screen.6 Tap the arrow to choose from previously entered addresses.To view mobile favorites and channels1 Tap the Favorites button to display your list of favorites. 2 Tap the page you want to view. 3 You will see the page that was downloaded the last time you synchronized with your PC. If the page is not on your device, the favorite will be dimmed. You will need to synchronize with your PC again to download the page to your device, or connect to the Internet to view the page.To add a favorite link while using the device, go to the page you want to add, tap and hold on the page, and tap Add to Favorites.123456](https://usermanual.wiki/HTC/HIMALAYAS.revised-manual-page-14-to-28/User-Guide-400068-Page-7.png)
![Bluetooth is a short-range wireless communications technology. Devices with Bluetooth capabilities can exchange information over a distance of about 30 feet without requiring a physical connection. Unlike infrared, you don't need to line up the devices to beam information with Blue-tooth. The devices only need to be within a range of about 30 feet. You can even beam information to a device in a different room, as long as it's within range. The software included with your Pocket PC Phone allows you to use Bluetooth in following ways :n Beam information, such as les, appointments, tasks, and contact cards, between devices that have Bluetooth capabilities. For ex-ample, if you and a co-worker each have a device with Bluetooth, you can beam items between your devices, such as les, contact cards, appointments, tasks, and so forth. n Create a dial-up modem connection between your device and a Bluetooth phone. You can then use the Bluetooth phone as a modem.Bluetooth modesBluetooth operates in three different modes:a. OnThe Bluetooth radio is turned on and you can use Bluetooth features. b. OffThe Bluetooth radio is turned off. In this mode, you can neither send nor receive information by using Bluetooth. You might want to turn the radio off at times in order to conserve battery power, or in situations where radio use is prohibited, for example on airplanes and in hospitals. c. DiscoverableThe Bluetooth radio is turned on, and all of the other Bluetooth devices within range (about 30 feet) can detect your device and attempt to beam information to BluetoothBluetooth](https://usermanual.wiki/HTC/HIMALAYAS.revised-manual-page-14-to-28/User-Guide-400068-Page-8.png)
![it, establish a bond, or use a Bluetooth service. In this mode, other devices can detect your device whether or not a bond has been created; however, in order to receive a beam from another device, you must accept it on your device. To make your device discoverable:Other Bluetooth devices can now detect your device and attempt to beam infor-mation to it, establish a bond, or use a Bluetooth service. Note that to receive beamed information, you must accept it on your device.If you no longer want your device to be discoverable, tap Off to turn off the radio or On to leave the radio on, but not allow detection by other devices.BondsA bond is a relationship that you create between your Pocket PC and another Bluetooth device in order to exchange information in a secure manner. Creating a bond involves entering the same personal identication number (PIN) on the two devices you want to bond. You need only create a bond once between two devices. Once a bond is created, the devices recognize the bond and are able to exchange information without your entering a PIN again. Beaming Information with Bluetooth1 Tap and hold an item to beam, such as an appointment in Calendar, a task in Tasks, a contact card in Contacts, or a le in File Manager.2 Tap Beam [type of item].3 Tap the device to which you want to send the beam. The item is beamed to the device you selected.Receiving a Bluetooth Beam1 Make sure that your device is congured to receive incoming beams and that Bluetooth is in discoverable mode.2 Make sure that your device is within 30 feet of the device beaming the information.3 When prompted to receive an incoming beam, tap Yes. The information is now stored on your device.Bluetooth](https://usermanual.wiki/HTC/HIMALAYAS.revised-manual-page-14-to-28/User-Guide-400068-Page-9.png)
![23Regulatory NoticeRegulatory Agency Identication NumbersFor regulatory identification purposes your product is assigned a model number PH10xx.The following accessories have been evaluated for use with your device. Their assigned model numbers listed below can identify these approved accessories. To ensure continued reliable and safe operation of your Pocket PC Phone, use only the accessories listed below with your PH10xx.Accessories Model NumberCradle PH15xCF Back Pack PH16xBattery Pack PH17x nThe above X may be any alphanumeric character or blank denoting external cosmetic changes.nThis product is intended for use with certied Class 2 Limited Power Source, rated 5 VDC, minimum 2A power supply unit.European Union NoticeProducts with CE marking comply with the R&TTE Directive (99/5/EC), the EMC Directive (89/336/EEC) and the Low Voltage Directive (73/23/EEC) issued by the Commission of the European Community. Compliance with these directives implies conformity to the followng European Norms (in brackets are the equivalent international standards): nEN 60950 (IEC 60950) Safety of InformationTechnology Equipment.n ETSI EN 301 511 Global system for mobile communications (GSM); Harmonized EN for mobile stations in the GSM 900 and GSM 1800 bands covering essential requirements of article 3.2 of the R&TTE directive (1995/5/EC )n ETSI EN 301 489-1 Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirementsn ETSI EN 301 489-7 Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 7: Specic conditions for mobile and protable radio and ancillary equipment of digital cellular radio teleommunications systems (GSM and DCS)n ETSI EN 301 489-17 Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 17: Specic conditions for 2.4 GHz wideband transmission systems and 5 GHz high performance RLAN equipment.n ETSI EN 300 328 Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband Transmission systems; data transmission equipment operating in the 2.4 GHz ISM band and using spread spectrum modulation techniques.nGSM11.10nANSI/IEEE C.95.1-1992 Specic absorption rate in mobile phone emission condition for body health nEN50360, EN50371 for SARnSAR : 0.271mW/10g](https://usermanual.wiki/HTC/HIMALAYAS.revised-manual-page-14-to-28/User-Guide-400068-Page-10.png)
![22Regulatory NoticeFCC Compliance StatementnFCC part 15 and part 24This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions : (!) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.n FCC ID : NM8HIMALAYASn Statement according to FCC part 15.21Modications not expressly approved by HTC could void the user's authority to operate the equipment.n Statement according to FCC part 15.105NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures :n Reorient or relocate the receiving antenna.n Increase the separation between the equipment and receiver.n Connect the equipment into an outlet on a circuit different from that to which the receiver is connectedn Consult the dealer or an experienced radio/TV technician for help..RF exposures Tests for SAR are conducted using standard operating positions specied by the FCC with the phone transmitting at its highest certied power level in all tested frequency bands. Although the SAR is determined at the highest certied power level, the actual SAR level of the phone while operation can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. Before a phone model is available for sale to the public, it must be tested and certied to the FCC that it does not exceed the limit established by the government-adopted requirement for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model. (Body-worn measurements may differ among phone models, depending upon available accessories and FCC requirements). While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement for safe exposure. For body worn operation, to maintain compliance with FCC RF exposure guidelines, use only High Tech computer, Corp. approved accessories. When carrying the phone while it is on, use the specic High Tech computer, Corp. supplied or approved carrying case, holster, or other body-worn accessory.Use of non High Tech computer, Corp. approved accessories may violate FCC RF exposure guidelines and should be avoided.](https://usermanual.wiki/HTC/HIMALAYAS.revised-manual-page-14-to-28/User-Guide-400068-Page-11.png)
![25Regulatory NoticeImportant Health and Safety InformationRetain and follow all product safety and operating instructions. Observe all warn and in the operating instructions.ings on the product To reduce the risk of bodily injury, electric shock, re, and damage to the equipment observe the following precautions.a) General PrecautionsnHeed service markings Except as explained elsewhere in the Operating or Service documentation, do not service any product yourself. Service needed on components inside these compartments should be done by an authorized service technicians or provider.nDamage requiring service Unplug the product from the electrical outlet and refer servicing to an authorized service technicians or provider under the following conditions:lLiquid has been spilled or an object has fallen into the product.lThe product has been exposed to rain or water.lThe product has been dropped or damaged.lThere are noticeable signs of overheating.lThe product does not operate normally when you follow the operating instructions.nAvoid hot areas The product should be placed away from heat sources such as radiators, heat registers, stoves, or other products (including ampliers) that produce heat.nAvoid wet areas Never use the product in a wet location.nAvoid pushing objects into product Never push objects of any kind into cabinet slots or other openings in the product. Slots and openings are provided for ventilation. These openings must not be blocked or covered.nMounting Accessories Do not use the product on an unstable table, cart, stand, tripod, or bracket. Any mounting of the product should follow the manufacturer's instructions, and should use a mounting accessory recommended by the manufacturer.nAvoid unstable mounting Do not place the product with an unstable base. nUse product with approved equipment This product should be used only with personal computers and options identied as suitable for use with your equipment.nAdjust the volume Turn down the volume before using headphones or other audio devices.nCleaning Unplug the product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning, but NEVER use water to clean an LCD screen. b) Safety Precautions for Power Supply UnitnUse the correct external power source A product should be operated only from the type of power source indicated on the electrical ratings label. If you are not sure of the type of power source required, consult your authorized service provider or local power company. For a product that operates from battery power or other sources, refer to the operating instructions that are included with the product](https://usermanual.wiki/HTC/HIMALAYAS.revised-manual-page-14-to-28/User-Guide-400068-Page-12.png)
![24Regulatory NoticenHandle battery packs carefully This product contains a Lithium Polymer battery. There is a risk of re and burns if the battery pack is handled improperly. Do not attempt to open or service the battery pack. Do not disassemble, crush, puncture, short external contacts or circuits, dispose of in fire or water, or expose a battery pack to temperatures higher than 60¢XC (140¢XF).DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY RE-PLACED. TO REDUCE RISK OF FIRE OR BURNS, DO NOT DISASSEMBLE, CRUSH, PUNCTURE, SHORT EXTERNAL CONTACTS, HEAT ABOVE 100℃ (212℉), OR DISPOSE OF IN FIRE OR WATER. REPLACE ONLY WITH SPECIFIED BATTERIES. RECYCLE OR DISPOSE OF USED BATTERIES ACCORDING TO THE LOCAL RE-GULATIONS OR REFERENCE GUIDE SUPPLIED WITH YOUR PRODUCT.c) Exposure to Radio Frequency (RF) SignalsYour wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on the safety standards previously set by both U.S. and international standards bodies:n American National Standards Institute (ANSI) IEEE. C95.1-1992n National Council on Radiation Protection and Measurement (NCRP). Report 86. 1986n International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1996n Ministry of Health (Canada), Safety Code 6. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health.The exposure standard for wireless mobile phones employs a unit of measurement known as the Specic Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg *.*In the U.S. and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in.d) SAR InformationTHIS MODEL DEVICE MEETS THE GOVERN-MENT'S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES.Your wireless mobile GSM phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on the saftety standards previously set by both U.S. and international standards bodies :n American National Standards Institute (ANSI) IEEE. C95.1-1992n National Council on Radiation Protection and Measurement (NCRP). Report 86. 1986n International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1996](https://usermanual.wiki/HTC/HIMALAYAS.revised-manual-page-14-to-28/User-Guide-400068-Page-13.png)
![For More InformationUsing for the First TiemMicrosoft, ActiveSync, Outlook, Pocket Outlook, Windows, Windows NT, and the Windows logo are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. n Ministry of Health (Canada), Safety Code 6. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health.The exposure standard for wireless mobile GSM phone employs a unit of measurement known as the Specic Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg*.For body worn operation, this phone has been tested and meets the FCC RF exposure guidelines when used with an accessory that contains no metal and that position the antenna of the GSM phone a minimum of 1.5cm from the body. The SAR values of this GSM phone are 0.726W/g (body) and 0.362W/g (head). Use of other accessories may not ensure compliance with the FCC RF exposure guidelines.The FCC has granted an Equipment Authorization for this model device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model device is on le with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID: NM8HIMALAYAS. Additional information on Specic Absorption Rates (SAR) can be found on the Cellular Telecommunications & Internet Association (CTIA) web-site as http://www.devicefacts.net.* In the U.S. and Canada, the SAR limit for mobile GSM phone used by the public is 1.6Watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in.Regulatory Notice](https://usermanual.wiki/HTC/HIMALAYAS.revised-manual-page-14-to-28/User-Guide-400068-Page-14.png)