HTC 2PS6500 Smartphone User Manual PME OC WWE SafetyGuide 20160303
HTC Corporation Smartphone PME OC WWE SafetyGuide 20160303
HTC >
Contents
- 1. User manual
- 2. User manual_Statement
User manual_Statement
![](/img.php?id=2941479&img=bg1.png)
Safety and
regulatory guide
![](/img.php?id=2941479&img=bg2.png)
2 Safety and regulatory guide
Please read before proceeding
THE BATTERY IS NOT FULLY CHARGED WHEN YOU TAKE THE
DEVICE OUT OF THE BOX.
Privacy restrictions
Some countries require full disclosure of recorded telephone
conversations.
Important health information and safety
precautions
READ THE FOLLOWING WARNINGS AND INFORMATION
BEFORE USE OF THE PRODUCT AND FOLLOW ALL PRODUCT
SAFETY AND OPERATING INSTRUCTIONS. FAILURE TO DO SO
MAY CAUSE BODILY INJURY, ELECTRIC SHOCK, FIRE, AND
OTHER DAMAGE.
Electrical safety
Do not attempt to disassemble the phone or its accessory. Only
qualified personnel must service or repair the phone or its
accessories.
Do not connect with incompatible products or accessories.
Do not touch the SIM card’s metal connectors as this may cause
an electrostatic discharge.
CAUTION
: Connecting to improperly grounded equipment can
result in an electric shock to your device.
This product is equipped with a USB Cable for connecting with
desktop or notebook computer. Be sure your computer is properly
grounded (earthed) before connecting this product to the
computer. The power supply cord of a desktop or notebook
computer has an equipment-grounding conductor and a
grounding plug. The plug must be plugged into an appropriate
outlet which is properly installed and grounded in accordance with
all local codes and ordinances.
Safety precautions for power supply unit
Use the correct external power source
A product should be operated only from the type of power
source indicated on the electrical ratings label.
NOTE:
This product is intended for use with a certified Class 2
Limited Power Source, rated 5 Volts DC, maximum 2.5 Amp and
rated 9 Volts DC, maximum 1.7 Amp power supply unit.
This product should be charged only with the following power
![](/img.php?id=2941479&img=bg3.png)
Safety and regulatory guide 3
supply.
AC adapter:
HTC, TC P5000-US
Your device should only be operated with the HTC qualified
battery pack, model number
B2PS6100
. Operating temperature
range: 32 °F to 104 °F (0 °C to 40 °C)
Handle battery packs carefully
This product contains a Lithium-ion polymer or Lithium-ion battery.
There is a risk of fire and burns if the battery pack is handled
improperly.
WARNING
: To reduce risk of fire or burns, do not
disassemble, crush, puncture, short external
contacts or circuits, expose to temperature above
40 °C (104 °F), or dispose of in fire or water.
Additional precautions
Keep the device dry and away from water or any liquid as it
may cause a short circuit.
The phone should only be connected to products that bear
the USB-IF logo or have completed the USB-IF compliance
program.
Only use the battery with a charging system that has been
qualified with the system per this standard, IEEE-Std-1725.
Use of an unqualified battery or charger may present a risk of
fire, explosion, leakage or other hazard.
Avoid dropping the phone. If the phone or battery is dropped,
especially on a hard surface, and the user suspects damage,
take it to a service centre for inspection.
If the battery leaks:
Do not allow the leaking fluid to come in contact with skin or
clothing. If already in contact, flush the affected area
immediately with clean water and seek medical advice.
Do not allow the leaking fluid to come in contact with eyes. If
already in contact, DO NOT rub; rinse with clean water
immediately and seek medical advice.
Take extra precautions to keep a leaking battery away from
fire as there is a danger of ignition or explosion.
![](/img.php?id=2941479&img=bg4.png)
4 Safety and regulatory guide
Safety precautions related to weather, temperature and
moisture
Keep this product away from water, excessive moisture and
extreme temperatures. Avoid hot areas. The product should be
kept away from heat sources such as radiators, heat registers,
stoves, or other products that produce heat. Do not leave the
product inside a vehicle or in places where the temperature may
exceed 40 °C (104 °F), such as on a car dashboard, window sill, or
behind glass that is exposed to direct sunlight or strong ultraviolet
light for extended periods of time. This may damage the product,
overheat the battery, or pose a risk to the vehicle.
Avoid wet areas. Never use the product in rain, or near washbasins
or other wet or high humidity locations, such as locations where
the device may be exposed to sweat or other liquids. If your
product gets wet, do not try to dry the product with the use of an
oven, dryer or microwave, as this may damage your product.
Avoid using your device after a dramatic change in temperature
and/or humidity ranges, as condensation may form on or within
the device. To avoid damaging the device, allow sufficient time for
the moisture to evaporate before use.
Do not use your phone if it has been damaged.
Prevention of hearing loss
CAUTION
: Permanent hearing loss may occur if
earphones or headphones are used at high volume for
prolonged periods of time.
Turn down the device volume before using headphones
or other audio devices.
Using your phone while flying
Use of cell phones may be restricted on aircraft. For your safety
and the safety of other passengers, always follow crew
instructions regarding the use of your phone.
Environmental hazards
When in any area with a potentially explosive atmosphere or
where flammable materials exist, the product should be turned off
and the user should obey all signs and instructions.
Road safety
When behind the wheel, driving safely should always be your first
priority. According to the National Highway Traffic Safety
Administration (NHTSA), scientific research indicates that using a
Safety and regulatory guide 5
wireless phone while driving degrades a driver’s performance,
whether used in a hands-free or hand-held mode. NHTSA advises
that the “safest course of action is to refrain from using a cell
phone while driving.” NHTSA’s policy on “Cell Phone Use While
Driving,” as well as Frequently Asked Questions on the subject, are
are available at www.nhtsa.gov. For your safety and the safety of
those around you, please consider turning your phone off while
you are driving.
If you choose to use your phone while driving, be aware that some
state and local governments have adopted laws governing the use
of wireless devices while driving. It is your responsibility to know
and comply with the laws in your area.
General precautions
You alone are responsible for how you use your phone and any
consequences of its use. You should switch off your phone
wherever the use of a phone is prohibited.
Avoid dropping, throwing, bending, or applying excessive
pressure to the device
Do not apply excessive pressure on the screen and the device to
prevent damaging them. It is also recommended that you store
the device in a protective case and only use your finger when
interacting with the touch screen. Cracked display screens due
to improper handling are not covered by the warranty.
Protect your phone
Always treat your phone and its accessories with care and
keep them in a clean and dust-free place and away from any
contaminants.
Do not expose your phone or its accessories to open flames or
lit tobacco products.
Do not paint your phone or its accessories.
Store your phone or its accessories at temperatures between
0°C to 40°C (32 °F to 104 °F).
Do not carry your phone in your back pocket as it could break
when you sit down.
Maintain a minimum separation distance of 1.5 cm between
the phone and your body.
Damage requiring service
Unplug the product from the electrical outlet and contact HTC’s
customer support via our website (www.htc.com) to locate an
authorized service technician or provider that can service your
device if
![](/img.php?id=2941479&img=bg6.png)
6 Safety and regulatory guide
The product has been damaged by being exposed to rain or
liquid, dropped, or subject to impact.
There are noticeable signs of overheating.
The product does not operate normally when you follow the
operating instructions.
Avoid pushing objects into product
Never push objects of any kind into cabinet slots or other
openings in the product. These openings must not be blocked or
covered.
Cleaning
Unplug the product from the wall outlet before cleaning. Do not
use liquid cleaners harsh chemicals, cleaning solvents or aerosol
s on the device or accessories. Use a damp cloth for cleaning,
but NEVER use water to clean the LCD screen.
Small children
Use of your device by small children should be supervised by an
adult. They could hurt themselves or others, or could
accidentally damage the phone. Your phone contains small parts
with sharp edges that may cause an injury or which could
become detached and create a choking hazard. Consult the
doctor immediately if the accessories or battery are swallowed.
Repetitive motion injuries
To minimise the risk of repetitive strain injuries, when texting or
playing games with your phone:
Do not grip the phone too tightly
Press the buttons lightly
Emergency calls
This phone, like any wireless phone, operates using radio signals,
which cannot guarantee connection in all conditions. Therefore,
you must never rely solely on any wireless phone for emergency
communications.
Disposal of your device
Please do not discard your device in a landfill. Electronic devices
contain substances that may be hazardous to the environment if
not properly disposed of. Please safely dispose of your device
through HTC’s free mail-back recycling program at
www.freeurecycle.com or by locating an e-waste drop-off point in
your community.
![](/img.php?id=2941479&img=bg7.png)
Safety and regulatory guide 7
Regulatory agency identifications
For regulatory identification purposes, your product is assigned a
model number of
2PS6500
.
Your phone’s FCC ID is
NM82PS6500.
This FCC ID can also be
found printed on the back of the device
To view your FCC ID and IC ID in your device you may also go to
the Settings menu
About Phone
Legal Information
Regulatory.
This is a Class 1 laser device.
However, the design of this product incorporates optics, a
protective housing and scanning safeguard such that there is no
access to level of laser radiation above Class 1.
CAUTION:
Use of controls or adjustment or performance of
procedures other than those specified herein may result in
hazardous radiation exposure.
Location of the label on the product:
L
aser beams
8 Safety and regulatory guide
Industry Canada statement
This device complies with Industry Canada licence-exempt RSS
standard(s). Operation is subject to the following two conditions:
(1) This device may not cause interference, and (2) this device
must accept any interference, including interference that may
cause undesired operation of the device.
This Class B digital apparatus complies with Canadian ICES-003.
This Category II radio communication device complies with
Industry Canada Standard RSS-310.
IMPORTANT NOTE:
The Country Code selection for 2.4 GHz WLAN is disabled on this
device. Operation in the 2.4 GHz band is restricted to Channels 1 –
11.
Operation in the 5 GHz band
Operation in the 5150-5250 MHz band is restricted by Industry
Canada to indoor use to reduce the potential for harmful
interference to co-channel mobile satellite systems.
The maximum antenna gain permitted for devices in the bands
5250-5350 MHz and 5470-5725 MHz shall comply with the e.i.r.p.
limit; and the maximum antenna gain permitted for devices in
the band 5725-5825 MHz shall comply with the e.i.r.p. limits
specified for point-to-point and non point-to-point operation as
appropriate.
High-power radars are allocated as primary users (i.e. priority
users) of the bands 5250-5350 MHz and 5650-5850 MHz and
that these radars could use interference and/or damage to
LE-LAN devices.
The worst-case tilt angle(s) necessary to remain compliant with
the e.i.r.p. elevation mask requirement set forth in Section 6.2.2(3)
shall be clearly indicated.
Federal Communication Commission interference
statement
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
Safety and regulatory guide 9
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
Consult the dealer or an experienced radio or television
technician for help.
FCC Caution
: Any changes or modifications not expressly
approved by the party responsible for compliance could void the
user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
FCC Hearing-Aid Compatibility (HAC) regulations for
wireless devices
The FCC has adopted rules to ensure reasonable access to
telecommunications services for persons with hearing disabilities.
As part of this effort, the industry uses a rating system for wireless
phones to help hearing device users find phones that may be
compatible with their hearing devices (hearing aids and cochlear
implants). This hearing-aid compatibility (HAC) rating system is
described in the American National Standards Institute (ANSI)
C63.19 standard and includes the following ratings:
M-Ratings:
For phones that use acoustic coupling with hearing
devices that are not operating in telecoil mode.
Phones rated M3
or M4 meet FCC HAC requirements and are likely to generate less
radio frequency interference with hearing devices than phones
with lower ratings. M4 is the better/higher of the two ratings. Your
2PS6500
is rated
M4
.
T-Ratings:
For phones that use inductive coupling with hearing
devices operating in telecoil mode.
Phones rated T3 or T4 meet
FCC HAC requirements and are likely to be more usable with a
hearing aid’s telecoil than phones that are not rated. T4 is the
better/higher of the two ratings. Your
2PS6500
is rated
T4
.
![](/img.php?id=2941479&img=bga.png)
10 Safety and regulatory guide
This phone has been tested and rated for use with hearing aids for
some of the wireless technologies that it uses. However, there may
be some newer wireless technologies used in this phone that have
not been tested yet for use with hearing aids. It is important to try
the different features of this phone thoroughly and in different
locations, using your hearing aid or cochlear implant, to determine
if you hear any interfering noise. Consult your service provider or
the manufacturer of this phone for information on hearing aid
compatibility. If you have questions about return or exchange
policies, consult your service provider or phone retailer.
The ratings are not guarantees. Trying out the phone with your
hearing device is the best way to evaluate it for your personal
needs. Results will vary depending on a user’s hearing device and
hearing loss. For example, if some wireless phones are used near
some hearing devices, users may detect a buzzing, humming, or
whining noise. Some hearing devices are more immune than others
to this interference noise, and phones also vary in the amount of
interference they generate. If your hearing device happens to be
vulnerable to interference, you may not be able to use a rated
phone successfully.
Please power off the Bluetooth function while using hearing aid
devices with your
2PS6500
.
For information about hearing aids and digital wireless
phones
FCC Hearing Aid Compatibility and Volume Control:
http://www.fcc.gov/cgb/dro/hearing.html
Hearing Aid Compatibility for Wireless Telephones
http://www.fcc.gov/guides/hearing-aid-compatibility-wireless
-telephones
Specific Absorption Rate (SAR) testing
Your device has been designed to comply with applicable limits for
RF exposure. These limits use a unit of measurement called
Specific Absorption Rate, or SAR, which refers to the rate at which
the human body absorbs RF energy. For more information on
Federal Communications Commission (FCC) and Industry Canada
(IC) SAR and radio frequency exposure, please see our Radio
Frequency Safety web page at:
http://www.htc.com/us/support/content.aspx?id=6505.
![](/img.php?id=2941479&img=bgb.png)
Safety and regulatory guide 11
HTC Corp. submitted SAR test results demonstrating compliance
with the FCC’s SAR limit for wireless devices as part of the FCC’s
equipment certification process for this device. These results can
be accessed via the FCC’s equipment authorization database
(found at http://transition.fcc.gov/oet/ea/fccid/) by searching for
the device’s FCC ID:
NM82PS6500
. This device’s maximum SAR
values as reported to the FCC are:
Head: 0.79 W/kg@1g
Body-worn Accessory: 0.62 W/kg@1g
Body-worn operation
This device was tested for typical body-worn operations. A
minimum separation distance of 1 cm must be maintained between
the user’s body and the handset, including the antenna.
Third-party belt-clips, holsters, and similar accessories used by this
device should not contain any metallic components. Body-worn
accessories that do not meet these requirements may not comply
with RF exposure requirements and should be avoided.
RF radiation exposure statement
This equipment must not be co-located or operated in
conjunction with any other antenna or transmitter.
Use only the supplied or an approved antenna. Unauthorized
antennas, modifications, or attachments could impair call quality,
damage the phone, or result in violation of regulations. Do not
use the phone with a damaged antenna. If a damaged antenna
comes into contact with the skin, a burn may result.
RoHS compliance
This product is in compliance with Directive 2011/65/EU of the
European Parliament and of the Council of 8 June 2011, on the
restriction of the use of certain hazardous substances in electrical
and electronic equipment (RoHS) and its amendments.
CEC appliance efficiency compliance
The BC logo (shown at the left) indicates that this
product complies with the California Energy
Commission (CEC) energy efficiency standards for
battery charger systems set forth at California Code
of Regulations Title 20, Sections 1601 through 1608.
12 Safety and regulatory guide
Proprietary notice
© 2013-2016 HTC Corporation. All rights reserved. HTC, the HTC
logo, and all other HTC device and feature names are the
trademarks or registered trademarks in the U.S. and/or other
countries of HTC Corporation and its affiliates.
![](/img.php?id=2941479&img=bgd.png)
91H0XXXX-XXM Rev.A
htc.com