HON HAI PRECISION IND HDS100 HP DreamScreen User Manual FoxConn

Hon Hai Precision Ind. Co., Ltd. HP DreamScreen FoxConn

Users Manual

HP DreamScreenUser GuideRevision 1.0
Copyright © 2009 Hewlett-Packard Development Company, L.P.The information in this document is subject to change without notice.ConventionsNotes, Cautions, and WarningsThroughout this guide, blocks of text may be accompanied by an icon. These blocks are notes, cautions, and warnings, and they are used as follows:WARNING: Indicates that failure to follow directions could result in bodily harm or loss of life.CAUTION: Indicates that failure to follow directions could result in damage to equipment or loss of information.NOTE: Indicates additional information.
HP DreamScreen User Guide iiiTable of ContentsConventions.............................................................................................................. iiWhat’s in the Box ...................................................................................................... vGetting Started.........................................................................................................  1Wall Mounting ...................................................................................................  3Remote Control.........................................................................................................  4Navigating the Keyboard Utility .................................................................................  6HP DreamScreen ......................................................................................................  7Key Features ............................................................................................................  9Initial Setup............................................................................................................  10Initial configuration from factory default settings....................................................  10Restoring factory default settings .........................................................................  10Viewing Tutorial Videos .....................................................................................  11Photo Slide Show and Browse ..................................................................................  12Slide show modes .............................................................................................  12Browse mode ...................................................................................................  12Thumbnail mode ...............................................................................................  13Managing Photos ...................................................................................................  14Using a PC as an External Media Source...................................................................  16Menu Options ........................................................................................................  18Setup...............................................................................................................  18Network Setup - wired.......................................................................................  19Network Setup - wireless....................................................................................  21Manual and advanced settings for wireless connection ..........................................  22Calendar .........................................................................................................  24Clock ..............................................................................................................  25Weather ..........................................................................................................  26Video ..............................................................................................................  27Photo...............................................................................................................  28Music ..............................................................................................................  30Facebook.........................................................................................................  32Snapfish ..........................................................................................................  34Pandora...........................................................................................................  36HP Smart Radio ................................................................................................  37HP DreamScreen PC Software ..................................................................................  38Installing HP DreamScreen PC Software.....................................................................  38Running HP DreamScreen PC Software......................................................................  39Drag and Drop file transfers ...............................................................................  40HP DreamScreen PC Software buttons .................................................................  40Troubleshooting......................................................................................................  42Specifications.........................................................................................................  46Frequently Asked Questions .....................................................................................  50
iv HP DreamScreen User GuideCleaning and Care Tips ..........................................................................................  51Cleaning the Screen..........................................................................................  51Cleaning the HP DreamScreen and Backing .........................................................  51Maintenance Guidelines ....................................................................................  51Regulatory and Safety Information ............................................................................  52Materials disposal.............................................................................................  52Perchlorate Material—special handling may apply................................................  52Federal Communication Commission Interference Statement ...................................  53
HP DreamScreen User Guide vWhat’s in the BoxQty Item Image1 HP DreamScreen 100 orHP DreamScreen 1301Stand1 Power Adapter (100-240VAC, 12VDC, 2A, 24W)1 Remote Control and Lithium Button Battery1 Cleaning Cloth1 CD containing HP DreamScreen PC Software, User Guide, How-to Videos, and Demonstration Video1 DocumentationWarrantyUser Guide on CDQuick Setup Guide1 USB cable with A and mini-USB connectorsOption         Back+
vi HP DreamScreen User Guide
HP DreamScreen User Guide 1Getting Started1Attach the stand to the rear of the HP DreamScreen 100 or HP DreamScreen 130 by screwing it into the threaded hole in the back of the unit. When the HP DreamScreen is in the horizontal position, the threaded hole is at the lower right as you face the rear of the unit.2Install the battery into the remote control with the positive (+) side up.3Connect the power cord into the DC input of the HP DreamScreen (1) and then plug the adapter into an AC power outlet (2).WARNING: When using this device, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: Do not use this product near water, for example, near a bathtub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool.Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning.NOTE: Screw in the stand by hand until it fits snugly, but do not overtighten it. Caution: Only replace the battery with the supplied battery type.Ensure the plus sign (+) faces up when you install a new battery.
2HP DreamScreen User Guide4Insert your memory card or USB storage device (external memory) containing desired photos, music, and/or video into the appropriate card slot or USB port as illustrated.(A) is for Compact Flash (CF) types I, II, and MD. (B) is for Secure Digital (SD) types SD, SDHC, MS, MS-Pro, MMC, and xD.(C) is for USB flash drives A dialog box prompting you to select an application appears. 5Use  or  to select the Video, Photo or Music application. Then press OK.NOTE: Memory cards and USB flash drives must be oriented correctly. Ensure the label on the card is facing toward the rear of the HP DreamScreen when you insert the card into a slot. A USB device can only be plugged in when oriented correctly. Do not force a memory card into a slot or a USB flash drive into a connector.NOTE: The HP DreamScreen must be at the main menu for the dialog box to start when an external source is connected.ABC
HP DreamScreen User Guide 3Wall MountingTo prepare the HP DreamScreen 100 or HP DreamScreen 130 for wall mounting, unscrew the stand.Holes for wall mounting are provided on the rear of the HP DreamScreen. The distance between the mounting holes (A) is 78.7 mm (3.098 in).The mounting hole diameter is 8.5 mm (0.33 in).The width of the notch (B) at the top of each mounting hole is 5.1 mm (0.20 in).Recommended Screw Size:zStandard: #8 pan-head wood screws, or pan-head tapping screws used with drywall anchors. Minimum screw length 25 mm (1in).zMetric: M4 pan-head wood screws, or pan-head tapping screws used with drywall anchors. Minimum screw length 25 mm (1in). NOTES: The HP DreamScreen can only be wall mounted horizontally. Mounting hole placement and size are the same for the HP DreamScreen 100 and the HP DreamScreen 130.HP does not supply wall mounting screws for the HP DreamScreen.
4HP DreamScreen User GuideRemote ControlNOTE: The sensor for the remote control infrared (IR) beam is at the top center edge of the screen when the HP DreamScreen is in the horizontal position.Display On/Off On button: Alternately turns display on or off. Note: The On/Off button on the HP DreamScreen glows white when on and red when off. Option Moves down to several alternate submenu functions.Click the Option button while in Thumbnail mode for more choices when working with photos.Back Moves back up one level at a time from submenus.Press and hold to access the main menu. Slide Show Press to start a slide show from internal memory from the home (main menu icon) screen. In thumbnail mode, press to launch a slide show starting from the selected photo.Cursor Pad The cursor pad consists of the navigation controls (, , , ), and the OK button.Up  Up Arrow on the cursor pad: Press to move up in thumbnail mode. Press to move left in browse mode. Press to move up or change items in a submenu list.You can place the remote control in a storage bay in the back of the HP DreamScreen for safekeeping.
HP DreamScreen User Guide 5Left Left Arrow on the cursor pad: Press to move left in menu, thumbnail, or browse, mode. Move left or change items in a submenu list.Moves selection back while playing music.OK Activate a highlighted menu item or highlighted submenu tab or button. Activate a highlighted thumbnail to view the photo at maximum size.Plays and pauses music and videos.Similar to an Enter key when a button is highlighted.Right Right Arrow on the cursor pad: Press to move right in menu, thumbnail, or browse mode. Move right or change items in a submenu list.Moves selection forward while playing music.Down Down Arrow on the cursor pad: Press to move down in thumbnail mode. Press to move right in browse mode. Move down or change items in a submenu list.Volume Up Press to incrementally increase the speaker volume. Press and hold until the volume begins to get louder, and release when the volume is the desired level.Volume Down Press to incrementally decrease the speaker volume. Press and hold until the volume begins to get softer, and release when the volume is the desired level.Mute Press to silence the speaker. Press again to reactivate the speaker. The previously set volume level is retained.
6HP DreamScreen User GuideNavigating the Keyboard UtilityWhen you set up your HP DreamScreen, you occasionally will need to enter data into a data field. This is required when you set up a wireless network configuration, a weather reporting location, or a HP DreamScreen configuration to access user accounts on Internet sites (such as Snapfish and Facebook). The HP DreamScreen has a keyboard utility that appears when you need to enter such information into data fields. 1Select your first data field and press OK. to select the keyboard.2Use the navigation controls to select the first character you want to enter or “type” into the data field. Then press OK. Continue until you have spelled out the name or word that you are entering into the data field. 3Use the arrow buttons to select Enter on the keyboard. Then press OK.4Press  or  to move among any other data fields and the Continue and Back buttons. Select Continue and press OK when you have completed entering data in all required fields.NOTE: This section describes basic keyboard utility navigation. Detailed steps for performing the various configurations that use the keyboard utility are covered later in this document.
HP DreamScreen User Guide 7HP DreamScreenLeft & Right Side ViewsACF Card Slot (insert card with label facing rear of HP DreamScreen.)Cards supported: CF I, II, and MDBMemory Card Activity Indicator (On when a memory card is active)CSD Card Slot (insert card with label facing rear of HP DreamScreen.)Cards supported: SD, SDHC, MS, MS-Pro, MMC, and xDDStandEOn Button & LED (toggles display on and off.) White = On, Red = OffTo reset the HP DreamScreen, press and hold this button until the display turns off (approximately six seconds). Then wait for the HP DreamScreen to restart.FAudio out jack (for headphones) GMini USB port - to connect the HP DreamScreen to a PC, making the PC an external source for photos, music, and videosHUSB 2.0 port - to connect a USB flash drive to the HP DreamScreen, making the flash drive an external source for photos, music, and videosILAN/ETHERNET port - to connect to the Internet when a wireless connection is not available.ABCDEFGHI
8HP DreamScreen User GuideFront ViewNOTE: Buttons are touch sensitive; they appear when tapped and stay on for 10 seconds.ARemoteSensorThe receiver for the IR beam of the remote control (not visible). Point the remote control at this location while pressing the remote control buttons.BUp Arrow: Press to move up in thumbnail mode.Press to move left in browse mode.Press to move up or change items in a submenu list.CDown Arrow: Press to move down in thumbnail mode.Press to move right in browse mode.Move down or change items in a submenu list.DOK Activate a highlighted menu item or highlighted submenu tab or button. Activate a highlighted thumbnail to view the photo at maximum size.Plays and pauses music and videos.Similar to an Enter key when a button is highlighted.ERight Arrow: Press to move right in menu, thumbnail, or browse mode.Move right or change items in a submenu list.Moves selection forward while playing music.FLeft Arrow: Press to move left in menu, thumbnail, or browse, mode.Move left or change items in a submenu list.Moves selection back while playing music.GBack Moves back up one level at a time from submenus. Press and hold to access the main menu. HOption Moves down to several alternate submenu functions. Click the Option button while in Thumbnail mode for more choices when working with photos.IVolume Control. Press   on the front panel followed by  or  to increase the volume. Press   on the front panel followed by  or  to decrease the volume.BCDEFGHIOption         BackA
HP DreamScreen User Guide 9Key FeaturesFeatureExternal Memory(Cards and or Flash Drives) Internal MemoryPhoto slide show with music XXPhoto slide show without music XXPhoto auto-rotation with Screen orientationXXAdd photos/videos/audio files to memoryXDelete photos/videos/audio files from memoryXPlayback music/audio files XXPlayback video clips XXView Photo thumbnails XXBrowse Photos/Images XX
10 HP DreamScreen User GuideInitial SetupInitial configuration from factory default settingsThe first time you turn your HP DreamScreen on, it will be in factory default mode. A demonstration video with sound will automatically play. 1Watch and enjoy the video. A welcome screen with a Continue button appears.OrPress OK or Back to stop the demonstration video. A welcome screen appears.2Press OK to continue. A screen with a guide for using the remote control unit appears.3Press OK again. The home (main menu icon) screen appears.Your HP DreamScreen is ready to show videos, show photos, and play music.Restoring factory default settings1Use  or  to select Setup from the main menu.2Press OK.3Press  to select Info.4Press OK to open the System Information page. 5Press  and then  to select Factory Default.6Press OK. A dialog box appears with a warning that continuing will erase all settings.7Select Yes and press OK to continue setting factory defaults, or Select No and press OK to quit changing settings to factory defaults. If you choose to continue, the HP DreamScreen will restart.8Reconfigure your network and any other settings in Setup (see “Setup”, “Network Setup - wired”, and “Network Setup - wireless” under “Menu Options.”NOTE: The following instructions are shown using the remote control unit. Most of these functions can also be conducted using the control keys located on the bottom right side of the HP DreamScreen (when orientated in the horizontal position). The keys are labeled with similar icon/text.NOTE: There are other setup tasks that you should do to enable other features. Many features (such as Weather, Facebook, Snapfish, HP Smart Radio, and Pandora) require a network connection. To configure the additional features, see the “Setup” section and the “Network Setup - wired” and “Network Setup - wireless” subsections, in this document as well as the other menu item sections that follow. Note: This does not remove any personal data from your HP DreamScreen.CAUTION: It takes several minutes to restore the HP DreamScreen to the factory default settings. Do not unplug or attempt to stop the HP DreamScreen until after it begins to play the introductory video.
HP DreamScreen User Guide 11Viewing Tutorial VideosThe HP DreamScreen comes with a series of preinstalled tutorial videos. These include:Basic SetupLoad Photos and Music VideosConnect to NetworkInternet ServicesPC Connection SetupCopying Content from your PC Over a Home NetworkStreaming Music and PhotosTo view the tutorial videos (as well as any other video on the HP DreamScreen):1Select Video from the Main Menu and press OK.2Select the All Videos tab and press .3Use the navigation controls to select the video of your choice and press OK.The selected video plays.Note: You can also view the setup tutorial videos at any time on a PC using the CD provided with your HP DreamScreen.
12 HP DreamScreen User GuidePhoto Slide Show and BrowseSlide show modesThere are two slide show modes, one with background music and the other without.Slide show without music: Simply start a slide show from an internal or external memory source as described below.Slide show with music:aStart a selection of music from a list of MP3 files or an album stored in internal memory, an external memory card, USB flash drive, a connected PC with Windows Media® Player installed (and configured for media sharing), Pandora, or HP Smart Radio. For details on playing music, see “Music”, “Pandora”, and “HP Smart Radio” in the “Menu Options” section of this document.bOnce the music is playing, press and hold Back to return to the main menu.cStart a slide show from internal memory of from Thumbnail mode as described below.Slide show from internal memory:To view a slide show of photos stored in internal memory:1Press Back.2Press the Slide Show button ( ) on the remote control. The slide show will start momentarily.Slide show from Thumbnail mode:1From the menu, select Photo. Then press OK.2Highlight the tab labeled for the source of the photos you want to browse.Depending on whether you have any other inputs connected, such as a PC, memory cards, or a USB flash drive, different tabs will appear. The default tab All Photos represents the photos stored in the internal memory.3Press OK. The thumbnail list of photos appears.4Use the navigation controls to select the first photo from which you want to start the slide show.5Press  . The slide show will start momentarily.6Press Back to stop the slide show.7Press and hold Back to return to the main menu.Browse mode1From the menu, select Photo. Then press OK.2Highlight the tab labeled for the source of the photos you want to browse.Note: For music to continue playing, you must set Playback Sequence in Music Options to Repeat or Random (see “Music” in the “Menu Options” section).
HP DreamScreen User Guide 13Depending on whether you have any other inputs connected, such as a PC, memory cards, or a USB flash drive, different tabs will appear. The default tab All Photos represents the photos stored in the internal memory.3Press OK. The thumbnail list of photos appears.4Use the navigation controls to select the first photo you wish to view in full size.5Press OK. The  and  move you to the right in the photo browser. The  and  move you to the left in the photo browser.6Press and hold Back to return to the main menu.Thumbnail mode1From the menu, select Photo. Then press OK.2Highlight the tab labeled for the source of the photos you want to browse.Depending on whether you have any other inputs connected, such as a PC, memory cards, or a USB flash drive, different tabs will appear. The default tab All Photos represents the photos stored in the internal memory.3Press OK. The thumbnail list of photos appears.4Press and hold Back to return to the main menu.
14 HP DreamScreen User GuideManaging PhotosRotate Photo: If desired, photos that are stored in internal memory can be rotated 90 degrees to the right. 1Select Photo in the main menu and press OK.2Select the All Photos tab and press OK.3Press .4Use the navigation controls to select the photo that you want to rotate.5Press Option and then use  or  to select Rotate and press OK. The photo will be rotated 90 degrees clockwise. To rotate the photo another 90 degrees, repeat step 5.Auto Rotation: During a slide show or while browsing, photos will rotate automatically to match the orientation of the HP DreamScreen.Copy Photos onto Internal Memory: You can copy photos from an external memory card, USB flash drive, or a PC. The photos can be copied to the internal memory of the HP DreamScreen.1Select Photo in the main menu and press OK.2Select the tab for the external source you are using and press OK.3Press  and press OK.4Use the navigation controls to select the photo that you want to copy.5Press Option and then use  or  to select Copy and press OK to copy the selected photoOrPress Option and then use  or  to select Copy ALL and press OK to copy all the photos from the external source.Delete Photos from Internal memory: 1Select Photo in the main menu and press OK.2Select the All Photos tab and press OK.3Press  and press OK.4Use the navigation controls to select the photo that you want to delete.5Press Option and then use  or  to select Delete and press OK to delete the selected photo.OrPress Option and then use  or  to select Delete All and press OK to delete all the photos in the internal memory of the HP DreamScreen.
HP DreamScreen User Guide 15 NOTES:HP DreamScreen only allows copies onto internal memory from an external memory card, or a USB flash drive.HP DreamScreen only allows deletion from internal memory. It will not delete photos from an external memory card, a USB storage device, or a PC.If your HP DreamScreen and your PC are connected to When you are at your PC, you can copy photos if you are running HP DreamScreen Software.
16 HP DreamScreen User GuideUsing a PC as an External Media SourceYou can use a PC as an external source for photos, music, and videos. The media can be copied from the PC while the HP DreamScreen is at the main menu.1Connect the power to the HP DreamScreen to turn it On. Then wait for the HP DreamScreen to go into the main menu.2Connect the small (mini) end of the USB cable to the mini USB socket on the HP DreamScreen.3Connect the large (A connector) end of the USB cable to a USB socket on your PC. See the following illustration.The HP DreamScreen stops responding to the remote control and the buttons on the bezel and displays the following message box:Screen is Connected to PCUnplug the USB cable to start using the Screen againThe PC will detect the HP DreamScreen and install it as a USB disk device with the following folders:mymusicmyphotomyvideo4Open a Windows Explorer session and open the USB disk device to the media folder to which you want to copy.
HP DreamScreen User Guide 175Open an additional Windows Explorer session and go to a folder on your PC where you store music, photos, or videos.6Double-click the appropriate media folder in the Windows Explorer session for the HP DreamScreen. 7Highlight the photos in the PC Windows Explorer session that you wish to copy to the HP DreamScreen.8Drag the media file(s) from the PC Windows Explorer session into the HP DreamScreen Windows Explorer session. See the following illustration.9Disconnect the USB cable when you are finished. The HP DreamScreen takes a moment to reorganize the files that are stored on it and then becomes active again. Note: Drag photos from your PC into the myphoto folder in the HP DreamScreen. Drag music files from your PC into the mymusic folder in the HP DreamScreen, and drag video files from your PC into the myvideo folder in the HP DreamScreen.
18 HP DreamScreen User GuideMenu OptionsTo select menu options, press  or  on the remote control or on the HP DreamScreen. Press OK when you are on the desired menu option.The menu options, from left to right are as follows:SetupCalendarClockWeather (internet connection is required)VideoPhotoMusicFacebook (Internet connection is required)Snapfish (Internet connection is required)Pandora (Internet connection is required)HP Smart Radio (Internet connection is required)SetupSelect the Setup icon in the main menu and press OK.General TabPress  or  to navigate among and select the following:Device NameIf you have more than one HP DreamScreen, you should give each one a unique name so they can all be connected to your network and work with your HP DreamScreen PC Software (see “Installing HP DreamScreen PC Software” and “Running HP DreamScreen PC Software”).1Press OK to go to a keyboard screen. You use the navigation controls in the keyboard utility to enter the desired device name as described in the following steps:2Use the Arrow buttons to navigate and select characters. Then press OK to enter the characters.Continue until you have spelled out the new device name. 3Select Enter and press OK on the remote to save the name.
HP DreamScreen User Guide 19Time Zone1Press OK to view a Time Zone Selection map. 2Press  or  to scroll to the desired time zone. 3Press  or  to select a city in a time zone (optional). 4Press OK once you have selected the time zone. OrPress Back to leave the map without making changes24-Hour TimePress  or  to toggle between On (24-hour time) or Off (12-hour time).Time1Press OK to go to the Time Setting page.2Press  or  to move among the hour, minute, second, and AM/PM settings.3Press  or  to increment or decrement the selected hour, minute, second, or AM/PM settings. 4Press OK to save your time settings. OrPress Back to exit the Time Setting page without saving the settings. Date1Press OK to go to the Date Setting page.2Press  or  to move among the month, day, and year settings.3Press   or  to increment or decrement the selected month, day, or year settings. 4Press OK to save your date settings. OrPress Back to exit the Date Setting page without saving the settings.US Daylight Saving TimePress  or  to toggle between On or Off.Network Setup - wired1Press OK to examine or change your network configuration settings.2Select Change and press OK.3Select Wired and press OK.4Select Continue and press OK.5Select Set Automatically and press OK.6Select Continue and press OK. The connection will complete automatically.NOTE: If you only want to examine the network settings, press OK after viewing them to exit without changing the configuration.
20 HP DreamScreen User GuideManual and advanced settings for wired EthernetSome cases may require manual settings of the IP address, network mask, default gateway, domain name server (DNS), and proxy servers.1Select Set Manually, Set IP and press OK.2 Select Set IP and press OK. The Network Settings page appears.3Select Static and press OK to enable editing of the network parameters.4Use the navigation controls to select the field(s) you want to change for IP, Mask, Gateway, or DNS. 5Press OK. You will be placed into the number keyboard strip at the bottom of the page.6Use  or  to select the first number to enter into the selected field. Then press OK.7Repeat step 4 if necessary to enter up to three digits in the field. 8Use  or  to select Enter. Then press OK.9Repeat steps 2 through 6 as necessary to edit the required fields.10 Select Set Manually, Set Proxy and press OK, if you need to configure the proxy settings.11 Select Proxy On and press OK. A keyboard screen appears.12 Use the navigation controls to select the first character or shortcut string to enter for the proxy server URL. Press OK.13 Continue until you have entered the entire URL of the proxy server.14 Select Enter and press OK.15 Select the Port field and press OK. A keyboard screen appears.16 Use the navigation controls to select the first digit of the port number for the proxy server. Then press OK.17 Continue until you have entered the entire port number into the field. 18 Select Enter and press OK.19 Select the ID field and press OK. A keyboard screen appears.20 Use the navigation controls to select the first character of the ID name for the proxy server. Then press OK.21 Continue until you have entered the entire ID name into the field. 22 Select Enter and press OK.23 Select the Password field and press OK. A keyboard screen appears.24 Use the navigation controls to select the first character of the Password for the proxy server. Then press OK.25 Continue until you have entered the entire password into the field. NOTE: This procedure is rarely necessary.Note: You can use an IP address for the proxy server, if you need to.Note: The port number is usually filled in by default.
HP DreamScreen User Guide 2126 Select Enter and press OK.27 Select Continue and press OK.Network Setup - wireless1Press OK to examine or change your network configuration settings.2Select Change and press OK.3Select Wireless and press OK. 4Select Continue and press OK. 5Press  to select the network name of the wireless router to which you want to connect. Then press OK. Then select Continue and press OK. The password entry keyboard appears.OrIf the name of your chosen network is not shown because broadcast SSID is disabled, select Set Network Manually and press OK. Then use  or  to select Continue and press OK. The Set your WIFI Network page appears.Network name (also known as the server set identifier, or SSID). This is displayed if the wireless router has broadcasting of the SSID enabled. It is case sensitiveSecurity - the security type used by the router. The choices are: None, WEP (OPEN), WEP (SHARED), WPA-PSK (TKIP), WPA-PSK (AES), WPA2-PSK (TKIP), and WPA2-PSK (AES)Password - The password for WEP and WPA security types is a key that is generated by a passphrase that is entered when the router is configured. The key is what you need to enter in the password field.6If you are starting at the Set your WIFI Network page, Select the Network Name field and press OK to select the keyboard. Otherwise, go to step 9.7Use the navigation controls to select the first character of the network name. Then press OK. Continue until you have spelled out the new network name. 8Use the arrow buttons to select Enter on the keyboard. Then press OK.9Press  to select the Security field.10 Press  or  to select the desired security option from those listed in the Security field.11 Press  to select the Password field. Then press OK to select the keyboard.12 Use the navigation controls to select the first character of the password. Then press OK. NOTE: If you only want to examine the network settings, press OK after viewing them to exit without changing any configuration.NOTE: If the wireless router is using any security, you will need to know some of the following information:NOTE: If the security option used by the wireless router is None, the password should be left blank.
22 HP DreamScreen User GuideContinue until you have spelled out the password. 13 Use the navigation controls to select Enter on the keyboard. Then press OK.14 Press  or  to move among the network fields and the Continue and Back buttons. Click Continue when you have completed your network configuration. The HP DreamScreen successfully connects in a few seconds if the network is configured properly.Manual and advanced settings for wireless connectionSome cases may require manual settings of the IP address, network mask, default gateway, domain name server (DNS), and proxy servers.1Select Set IP and press OK. The Network Settings page appears. 2Select Static and press OK to enable editing of the network parameters.3Use the navigation controls to select the field(s) you want to change for IP, Mask, Gateway, or DNS. 4Press OK. You will be placed into the number keyboard strip at the bottom of the page.5Use  or  to select the first number to enter into the selected field. Then press OK.6Repeat step 4 if necessary to enter up to three digits in the field. 7Use  or  to select Enter. Then press OK.8Repeat steps 2 through 6 as necessary to edit the required fields.9Select Set Proxy and press OK, if you need to configure the proxy settings.10 Select Proxy On and press OK. A keyboard screen appears.11 Use the navigation controls to select the first character or shortcut string to enter for the proxy server URL. Press OK.12 Continue until you have entered the entire URL of the proxy server.13 Select Enter and press OK.14 Select the Port field and press OK. A keyboard screen appears.15 Use the navigation controls to select the first digit of the port number for the proxy server. Then press OK.16 Continue until you have entered the entire port number into the field. 17 Select Enter and press OK.18 Select the ID field and press OK. A keyboard screen appears.19 Use the navigation controls to select the first character of the ID name for the proxy server. Then press OK.20 Continue until you have entered the entire ID name into the field. NOTE: This procedure is rarely necessary.Note: You can use an IP address for the proxy server, if you need to.Note: The port number is usually filled in by default.
HP DreamScreen User Guide 2321 Select Enter and press OK.22 Select the Password field and press OK. A keyboard screen appears.23 Use the navigation controls to select the first character of the Password for the proxy server. Then press OK.24 Continue until you have entered the entire password into the field. 25 Select Enter and press OK.26 Select Continue and press OK.BrightnessPress  to increase the brightness setting, or press the  to decrease the brightness setting. Display Time On (Auto)The HP DreamScreen display is turned on automatically at a preset time when Power Management: Display Schedule On is enabled.1Press OK. The Time Setting page appears.2Press  to enable and press the  to disable Power Management: Display Schedule On.3Press  or  to move among the hour, minute, and AM/PM settings.4Press  or  to increment or decrement the selected hour, minute, or AM/PM settings. 5Press OK to save your Power Management: Display Schedule On time settings. OrPress Back to exit the Time Setting page without saving the settings. Display Time Off (Auto)The HP DreamScreen display is turned off automatically at a preset time when Power Management: Display Schedule Off is enabled. This feature is used to automatically conserve power.1Press OK. The Time Setting page appears.2Press  to enable and press  to disable Power Management: Display Schedule Off.3Press  or  to move among the hour, minute, and AM/PM settings.4Press  or  to increment or decrement the selected hour, minute, or AM/PM settings. 5Press OK to save your Power Management: Display Schedule Off time settings. OrPress Back to exit the Time Setting page without saving the settings. Synchronize Clock With Internet ClockPress  or  to toggle On or Off.Screen SaverNOTE: The brightness settings range from 0 to 10. The default setting is 8.
24 HP DreamScreen User GuideScreen Saver lets you set the amount of time that the HP DreamScreen must be idle before the screen saver starts.Press  or  to select the Screen Saver Wait time. The available selections are: Off, 5 Mins, 10 Mins, 15 Mins, 30 Mins, 60 Mins, 90 Mins, and 120 Mins.Screen Saver OptionsPress  or  to toggle among Disabled, Slide Show, Clock, Screen Off, or Demo Video.Automatic Software UpdatePress  or  to toggle On or Off. Info Tab1Select the Info tab and press OK to open the System Information page. You can view the serial number, product name and model, used memory space, free memory space, copyright notices, and current software version.2Optionally, press. Then press  or  to select from Software Update, Reset Settings, and Diagnostics.3Press OK. Then follow the instructions on the page that is displayed.CalendarThe Calendar allows you to view the current month or move forward or backward from month to month.1Select the Calendar icon in the main menu and press OK. A calendar page appears.2Use the navigation keys to move forward or backward from month to month.NOTE: When Automatic Software Update is turned on and the HP DreamScreen is connected to the internet, you will be prompted to update your software when software updates are available. It is recommended that you accept updates when prompted. Never turn off power to the HP DreamScreen during a software update. Wait until the software update completes and the HP DreamScreen restarts.
HP DreamScreen User Guide 25Clock1Select the Clock icon in the main menu and press OK. A clock displaying the current time appears.2Press Option. A Clock Settings dialog appears.3Use  or  to select any of the following items:View - Press  or  to select one of the following display options: Single Clock, Dual Clock, Clock with Calendar, or Clock with Photo.Style - Press  or  to select Analog or Digital.Alarm - Select Setup. You can set up to three alarms, all of which are set in the same manner.zUse  or  to select the desired alarm to set and press OK.zUse  or  to select among ON/OFF, Hour, Minute, Frequency, or Alarm Sound.zPress  or  to change the selected alarm setting.zSelect the OK button and press OK.zPress Back to return to the Clock Settings dialog.2nd Clock Timezone - Press  or  to select among the time zone settings relative to GMT.2nd Clock Nearby city - Press  or  to select a city associated with the selected time zone.4Select the OK button and press OK when you are finished configuring the clock.5Press Back to return to the main menu.NOTE: The Clock menu is for configuring display modes, style and alarm settings. To set the clock, see the submenu items for time configuration under “Setup”.
26 HP DreamScreen User GuideWeatherYou must have an Internet connection for Weather to work.1Select the Weather icon in the main menu and press OK. The current day’s weather and the forecast for the next four days’ weather for the configured location appears.To change the location for the weather forecast:2Press Option. A Weather Settings dialog appears.3Select Country and press OK. A keyboard page appears.aUse the navigation controls to select the first character of the desired country. Then press OK. bContinue until you have spelled out the name of the country. cUse the arrow buttons to select Enter on the keyboard. Then press OK.And/OrSelect City or Zip Code and press OK. A keyboard page appears.dUse the navigation controls to select the first character of the desired city or the Zip code. Then press OK. eContinue until you have spelled out the name of the city or the five digit Zip code. Use the arrow buttons to select Enter on the keyboard. Then press OK.OrNavigate to Select City, and press the  or  to scroll through a list of cities.4Optionally, select Temperature Format, and press the  or  to toggle between Fahrenheit(°F) or Celsius(°C).5Select OK at the bottom of the dialog. Then press OK.
HP DreamScreen User Guide 27Video1Select the Video icon in the main menu and press OK.2Press  or  to select among the Dates, Folders, All Videos, (and if present) memory cards, and/or USB tabs.A thumbnail list of videos appears after a few seconds.3Press  to move into the thumbnail list.4Use  or  to select the video you wish to play.5Press OK. The selected video will start.6To pause the video, press OK.OrTo stop the video and go back into the thumbnail list, press, Back.7Press and hold the Back button to return to the main menu.Video SubmenusPress Option while a video in the thumbnail list is selected. Press the  or  to select the following submenu items:Copy - Select Copy and press OK to copy the selected video from an external source (memory cards, or USB) to the internal memory of the HP DreamScreen. You cannot copy videos to an external source.Copy All - Select Copy All and press OK to copy all videos from an external source (memory cards, or USB) to the internal memory of the HP DreamScreen. You cannot copy videos to an external source.Delete - Select Delete and press OK to delete the selected video from the internal memory of the HP DreamScreen. You cannot delete videos from an external source.Delete All - Select Delete All and press OK to delete all videos from the internal memory of the HP DreamScreen. You cannot delete videos from an external source.Video Settings - Select Video Settings and press OK to launch the Video Setting dialog, which sets the repeat and shuffle behavior of how the videos are displayed. Use the  or  to select Play Once, Random, or Repeat.When you have selected your option, select the OK button and press OK. NOTE: To install videos from your PC, use the mini USB cable.
28 HP DreamScreen User GuidePhoto1Select the Photo icon in the main menu and press OK.Press  or  to select among the Dates, Folders, All Videos, (and if present) PC, memory cards, and/or USB tabs.2Press OK. A thumbnail list of photos appears.3Press  to select the first photo in the thumbnail list.4Use the navigation controls to select the first photo you wish to browse or from which you wish to start a slide show.5Press OK to browse. The  and  move you to the right in the photo browser. The  and the  move you to the left in the photo browser.OrPress   to start the slide show. 6Press Back to stop browsing or stop a slide show.7Press Back two more times to return to the main menu.Photo SubmenusPress Option while a photo in the thumbnail list is selected. Press the  or the  to select the following submenu items:Slideshow - Select Slideshow and press OK to start a slide show.Rotate - Select Rotate and press OK to rotate the selected photo. This only works on photos stored in the internal memory of the HP DreamScreen. You cannot rotate photos stored on an external source.Copy - Select Copy and press OK to copy the selected photo from an external source (memory card, or USB) to the internal memory of the HP DreamScreen. You cannot copy photos to an external source.Copy All - Select Copy All and press OK to copy all photos from an external source (memory card, or USB) to the internal memory of the HP DreamScreen. You cannot copy photos to an external source.Delete - Select Delete and press OK to delete the selected photo from the internal memory of the HP DreamScreen. You cannot delete photos from an external source.Delete All - Select Delete All and press OK to delete all photos from the internal memory of the HP DreamScreen. You cannot delete photos from an external source.
HP DreamScreen User Guide 29Photo Options - Select Photo Options and press OK to launch the Photo Options dialog, which sets the behavior of how the photos and thumbnails are displayed. The options are:zSlideshow Timing - Press the  or  to change the time for each photo in a slide show to be displayed. The intervals are: 3 sec, 5 sec, 8 sec, 10 sec, 30 sec, 5 min, 10 min, 30 min, 1 hour, 12 hour, and 24 hour.zSlideshow Transition - Press the  or  to change the style of transition from one photo to the next. The transition options are: Random, Wipe Left, Wipe Right, Wipe Up, Wipe Down, Split horizontal in, Split horizontal out, Split vertical in, Split Vertical out, Left blinds, Right blinds, Up blinds, Down blinds, Insert Mode, Plus Mode, and Dissolve.zDisplay Mode - Press the  or  to choose between Fit to screen, or Original.zSlideshow Sequence - Use the  or  to select Play Once, Random, or Repeat.zStream Photos From PC - Use the  or  to select the PC on your network that you want to use as a source for streaming photos. See the “Streaming photos” section that follows.zWhen you have made your selections, select the OK button and press OK.Streaming photos1Select Photo from the main menu and press OK. The Photos on Screen page appears.2Press Option. The Photo Options dialog (in the foregoing description) appears.3Configure the Photo Options, select the OK button and press OK. The HP DreamScreen returns to the Photos on Screen page.4Use  or  to select the PC tab and press OK.5A list of folders that reside on the PC appears. 6Use the navigation controls to select a photo folder and press OK. You may need to repeat this step on one or more subfolders before any photo thumbnails appear.7Select a thumbnail and press   to start a slide show of photos from the PC.OrSelect a thumbnail and press OK. to browse photos from the PC.8Press Back to stop browsing or stop a slide show.9Press and hold Back to return to the main menu. Note: The Photo Options dialog can also be launched from the opening page of the Photo application by pressing Option.Note: To stream photos from a PC, you must configure at least one photo library configured in Windows Media Player (version 11 or greater).
30 HP DreamScreen User GuideMusic1Select the Music icon in the main menu and press OK.Press  or  to select among the Album, Artist, Genre, Song, (and if present) PC, memory card, and/or USB tabs.2Press OK. For Albums, Artists, Genres, and SongsA list of group icons (e.g., album titles, artist names, or music classified by genre) appears. 1Select a group from the list and press OK. A list of music selections appears, with the first song highlighted.2Press OK to play the highlighted song. Music will continue to play selections from the list.OrPress Option to launch a submenu of options.Copy - Disabled for Albums, Artists, or Genres.Copy All - Disabled for Albums, Artists, or Genres.Delete - Select Delete and press OK to delete the selected music from the internal memory of the HP DreamScreen. You cannot delete music from an external source.Delete All - Select Delete All and press OK to delete all music from the internal memory of the HP DreamScreen. You cannot delete music from an external source.Music Options - Select Music Options and press OK to launch the Music Settings dialog, which sets the behavior of how the music and thumbnails are displayed. The options are:zPlayback Sequence - Use  or  to select Play Once, Random, or Repeat.zStream Music From PC - Use the  or  to select the PC on your network that you want to use as a source for streaming music.zWhen you have made your selections, select the OK button and click OK.3Use  and  to select the first song you wish to play.4Press OK to play the song. Pressing OK alternately pauses and continues the music.5Press Back to return to the list of songs.6Press Back three more times to return to the main menu. For PC, memory card, compact flash, or USBA list of music selections appears, with the first song highlighted.1Use  and  to select the first song you wish to play.
HP DreamScreen User Guide 312Press OK to play the song. Pressing OK alternately pauses and continues the music.OrPress Option to launch a submenu of options.Copy - Select Copy and press OK to copy the selected music from an external source (memory card, or USB) to the internal memory of the HP DreamScreen. You cannot copy music to an external source.Copy All - Select Copy All and press OK to copy all music from an external source (memory card, or USB) to the internal memory of the HP DreamScreen. You cannot copy music to an external source.Delete - Select Delete and press OK to delete the selected music from the internal memory of the HP DreamScreen. You cannot delete music from an external source.Delete All - Select Delete All and press OK to delete all music from the internal memory of the HP DreamScreen. You cannot delete music from an external source.Music Options - Select Music Options and press OK to launch the Music Setting dialog, which sets the behavior of how the music and thumbnails are displayed. The options are:zPlayback Sequence - Use  or  to select Play Once, Random, or Repeat.zStream Music From PC - Use the  or  to select the PC on your network that you want to use as a source for streaming music. See the “Streaming Music” section that follows.zWhen you have made your selections, select the OK button and press OK.Streaming Music1Select Music from the main menu and press OK. The Music from your PC page appears.2Press Option. The Music Options dialog (in the foregoing description) appears.3Configure the Music options, select the OK button and press OK. The HP DreamScreen returns to the Music from your PC page.4Use  or  to select the PC tab and press OK.5A list of folders that reside on the PC appears. 6Use the navigation controls to select a music folder and press OK. You may need to repeat this step on one or more subfolders before any music selections appear.7Select a song and press OK to listen to music.8Press OK again to pause the music.9Press Back to move up one level.10 Press and hold Back to return to the main menu.Note: The Music Options dialog can also be launched from the opening page of the Music application by pressing Option.Note: To stream music from a PC, you must configure at least one music library configured in Windows Media Player (version 11 or greater).
32 HP DreamScreen User GuideFacebookFacebook requires an Internet connection and an account that is already set up.Configuring your HP DreamScreen to use your Facebook account1Select the Facebook icon in the main menu and press OK.2Press Option to start the Facebook Account dialog.3Select Email. A keyboard page appears.4Use the navigation controls to select the first character of the email address that you use for your Facebook account. Then press OK. Continue until you have spelled out the entire email address. 5Use the navigation controls to select Enter on the keyboard. The Facebook Account dialog appears.6Select Password. A keyboard screen appears.7Use the arrow buttons to select the first character of your Facebook password. Then press OK. Continue until you have spelled out the entire password. 8Use the navigation controls to select Enter on the keyboard. Then press OK.9Select the Save Password checkbox and click OK to avoid having to enter the password every time you start Facebook.10 Select OK and press OK. A Facebook list of friends appears.11 Press Back to return to the main menu.Viewing friends in your Facebook accountNOTE: You must configure the HP DreamScreen to view friends, photos, and events on your Facebook account before you can use your HP DreamScreen to use Facebook. The first time you start Facebook, an introductory screen appears. The introductory screen gives you the choice to configure the HP DreamScreen to view friends, photos, and events from an existing Facebook account or to go to a PC and create a Facebook account.NOTES: The bottom row of the keyboard has some preconfigured shortcut keys such as: http://, www., .com, .org, .gov, .edu, and .net to make it easier to key in a URL.Select Caps Lock and press OK to reveal upper case letters and several additional characters. Select Caps Lock and press OK again to return to the standard keyboard setting.
HP DreamScreen User Guide 331Select the Facebook icon in the main menu and press OK. The Status Updates tab is highlighted by default. Any friends who have included you in their list of contacts will appear if they have posted any public comments.2Use  and  to scroll your Facebook status updates down or up one page at a time.3Press Back to go back to the tabs at the top of the Facebook page.4Press Back again to return to the main menu.Viewing photos in your Facebook account1Select the Facebook icon in the main menu and press OK.2Press  to select the Photos tab. Then press OK. A thumbnail list of your friends’ profile photos (starting with you) appears. An icon appears when no profile exists for a friend.3Press  to get into the thumbnail list.4Use the navigation controls to select a friend whose photos you want to view. Then press OK.5Use the navigation controls to select an album. Then press OK.6Press OK to browse the photos in the album.OrPress   to start a slide show of the selected album.7Press Back to go up to the album view.8Press Back to go up to your friends’ thumbnail list.9Press Back two more times to get to the main menu.Viewing your events in your Facebook account1Select the Facebook icon in the main menu and press OK.2Press  to select the Events tab. Then press OK. Any events you have entered appear.3Use  and  to scroll through the events in the list.OrPress Back until you return to the main menu.NOTE: if a selected friend has not posted a photo album, a message indicating there is no album appears.
34 HP DreamScreen User GuideSnapfishSnapfish requires an Internet connection and a Snapfish account that is already set up on your PC.Configuring your HP DreamScreen to use your Snapfish account1Select the Snapfish icon in the main menu and press OK. The Snapfish page appears with the Albums highlighted.2Press Option. A Snapfish Account dialog box appears.3Select Email and press OK. A keyboard page appears.4Use the navigation controls to select the first character of the email address that you use for your Snapfish account. Then press OK. Continue until you have spelled out the entire email address. 5Use the arrow buttons to select Enter on the keyboard. The Snapfish Account dialog box appears.6Select Password. A keyboard screen appears.7Use the navigation controls to select the first character of your Snapfish password. Then press OK. Continue until you have spelled out the entire password. 8Use the navigation controls to select Enter on the keyboard. Then press OK. The Snapfish Account dialog box appears.9Select the Save Password checkbox and click OK to avoid having to enter the password every time you start Snapfish.10 Select the OK button and press OK.NOTE: You must configure the HP DreamScreen to play from your Snapfish account before you can view Snapfish photos or slide shows on your HP DreamScreen. The first time you start Snapfish, an introductory screen appears. The introductory screen gives you the choice to configure the HP DreamScreen to play from an existing Snapfish account or to go to a PC and create a Snapfish account.NOTES: The bottom row of the keyboard has some preconfigured shortcut keys such as: http://, www., .com, .org, .gov, .edu, and .net to make it easier to key in a URL.Select Caps Lock and press OK to reveal upper case letters and several additional characters. Select Caps Lock and press OK again to return to the standard keyboard setting.
HP DreamScreen User Guide 35Using your Snapfish account1Select the Snapfish icon in the main menu and press OK. A thumbnail list of albums appears.2Press  to get into the album thumbnail list. The first album will be highlighted.Use the navigation controls to select a different album as desired.3Press OK to select the album. The first photo in the album will be selected.Use the navigation controls to select the first photo you wish to browse or from which you wish to start a slide show.4Press OK to browse. The  and  move you to the right in the photo browser. The  and  move you to the left in the photo browser.OrPress   to start the slide show. 5Press Back to stop browsing or stop a slide show.6Press Back two more times to return to the main menu.NOTE: You can start a slide show from the selected album by pressing   at this point, or you can continue to the next step for additional options.
36 HP DreamScreen User GuidePandoraPandora requires an Internet connection and a Pandora account that is already set up on your PC. Configuring your HP DreamScreen to use your Pandora accountIf you do not have a Pandora account or you do not have media sharing enabled on your PC, the HP DreamScreen will prompt you to set up a Pandora account when you start Pandora.1Set up a Pandora account from your PC as you normally would. 2Ensure that your PC and your HP DreamScreen on the same local area network. 3Set up file sharing. When you install HP DreamScreen PC Software and configure it to share with your HP DreamScreen, that should take care of this. See “Installing HP DreamScreen PC Software.”4When you run Pandora from the main menu on the HP DreamScreen, the HP DreamScreen detects the Pandora setup from your PC and displays stations that are configured for that account. 5Use  or  to select a station and press OK.When you select a station, the HP DreamScreen runs Pandora from the PC and streams the music from the PCUsing your Pandora account1Select the Pandora icon in the main menu and press OK. A list of stations appears.2Press  to get into the station list. The first station will be highlighted.Use  or  to select a different station as desired.3Press OK to play music from the selected station. Music will start to play from the selected station.4Press OK to stop playing music.5Press and hold Back to return to the main menu.NOTE: You must configure the HP DreamScreen to play music from your Pandora account before you can listen to Pandora. The first time you start Pandora, an introductory screen appears. The introductory screen gives you the choice to configure the HP DreamScreen to play from an existing Pandora account or to go to a PC and create a Pandora account.NOTE: You can use  or  to select a different station at any time. Then press OK to start playing music from the newly selected station.
HP DreamScreen User Guide 37HP Smart RadioHP Smart Radio requires an Internet connection.1Select the HP Smart Radio icon in the main menu and press OK. The HP Smart Radio page appears.2Press Option. The Search for Stations dialog box appears.3Use  or  to select Location and press OK.OrUse  or  to select Genre and press OK.4Use  to select the First Char of Location / Genre (depending on your choice in the previous step) selector.5Use  or  to select the first character of the location / genre.6Use  to select the Location / Genre selector. 7Use  or  to scroll the items in the selector.8Use  to go to the Sort By options.9Use  or  to select Popularity and press OK to sort stations by popularity.OrUse  or  to select Name and press OK to sort stations by name.10 Use  to select the OK button on the screen. Then press OK on the remote.A list of stations loads and appears after a brief amount of time.11 Use  and  to select a station in the list. Press OK to add a selected station to your permanent play list.12 Repeat the previous step to add any other stations to your play list.13 Press Back to view your HP Smart Radio play list.14 Use  and  to select a new station in the play list, and press OK to start playing.OrYou can remove a station. Use  and  to select a station in the play list, and press Option. Select Yes and press OK in the Remove Selected Stations dialog to remove the station.NOTE: You must configure stations on HP Smart Radio before you can listen to listen to HP Smart Radio.NOTE: When you add a station to your play list, it begins to play and continues playing until you add another station.
38 HP DreamScreen User GuideHP DreamScreen PC SoftwareThe CD that comes with your HP DreamScreen has PC software that can enhance the ease of HP DreamScreen configuration and installation of photos, videos, and music files. The PC software allows you to:Upload photos, videos, and music from your PC to your HP DreamScreen.Manage multiple HP DreamScreens on your home network.Use your PC to set up your HP DreamScreen(s) to view your accounts on Snapfish, Pandora, and Facebook.Installing HP DreamScreen PC Software1Turn on the HP DreamScreen and connect it to your network.2Insert the HP DreamScreen CDROM into the optical disc drive of your PC.The HP DreamScreen PC Software will start automatically. A list of options appears.3Click on the option to install the HP DreamScreen PC Software. An Install Shield Wizard dialog box appears.4Click Next to continue with the installation.The End User License Agreement appears in a dialog box.5Scroll through the End User License Agreement to read it.6Select the button to accept the terms of the End User License Agreement.7Click Install.8Continue following the prompts and by clicking Next whenever it appears in a subsequent dialog box. After a few steps, a Media Sharing dialog box appears with an icon representing each HP DreamScreen on your network.Note: HP DreamScreen PC Software is supported on Windows® XP 32-bit and Windows Vista® 32 and 64-bit operating systems.Note: If the HP DreamScreen PC Software does not start automatically, open the HP DreamScreen CDROM in Windows Explorer, and double-click the autorun.exe file.Note: If the HP DreamScreen PC Software is already installed, a dialog box will either appear and inform you if the currently installed PC software is the newest available, or it will ask you if you want to update to a newer version of HP DreamScreen PC Software.Note: You must accept the terms of the End User License Agreement to complete the installation of the HP DreamScreen PC Software.If you select the button to decline the End User License Agreement, cancellation of the HP DreamScreen PC Software installation is the only available option.
HP DreamScreen User Guide 399Left click the icon of the HP DreamScreen that you want to configure to share media files stored on your PC. This also enables media sharing with Windows Media Player.10 Click OK in the Media Sharing dialog box. The final Install Shield Wizard dialog box appears.11 Click Finish to complete the PC software installation and setup.Running HP DreamScreen PC Software1Turn on the HP DreamScreen and connect it to your network.2Go to the HP DreamScreen main menu.3Double-click the HP PC Utility icon on the PC desktop. The HP DreamScreen PC Software main window appears.4Click the name of the HP DreamScreen from the list at the top of the HP DreamScreen PC Software window. HP DreamScreen PC Software displays an active Drag and Drop folder icon for transferring files from the PC to the HP DreamScreen. The following message is displayed on the HP DreamScreen:Screen is ready to receive files from PCThe HP DreamScreen does not allow direct user input at this time.  Note: To select more than one HP DreamScreen to configure to share files with your PC, hold down the Ctrl key while you left click the additional icons.NOTE: From time to time you may be prompted to update your HP DreamScreen PC Software when software updates are available. It is recommended that you accept updates when prompted.Note: If the HP DreamScreen list at the top of the HP DreamScreen PC Software utility window is empty, click the Find Screen(s) button in the lower right corner of the window.
40 HP DreamScreen User GuideDrag and Drop file transfers1Open Windows Explorer and navigate to a folder containing picture or music files.2Click a music or picture file in Windows Explorer. Continue to press the left mouse button while dragging the selected file over the folder displayed in the HP DreamScreen PC Software utility window.The file is transferred to the HP DreamScreen.3Click Finished when you have finished using HP DreamScreen PC Software and want to use the HP DreamScreen normally.HP DreamScreen PC Software buttonsFinishedClick Finished when you have finished using HP DreamScreen PC Software and want to use the HP DreamScreen normally.Find Screen(s)Click Find Screen(s) in the HP DreamScreen PC Software utility window to find an HP DreamScreen that does not appear in the list at the top of the window.OptionsClick Options in the HP DreamScreen PC Software utility window. The Options page appears with the following buttons:Online Services1Click Online services to use your PC to configure the HP DreamScreen to access your existing Facebook and, Snapfish accounts. An account settings page appears.2Enter the user email account name and password for your Facebook and/or Snapfish account.3Click Send to Screen to send the online services account information to the HP DreamScreen and return to the Options page.OrClick Back to return to the Options page without transferring online account information.4Click Back to return to the HP DreamScreen PC Software main window. 5Click Finished when you have finished using HP DreamScreen PC Software and want to use the HP DreamScreen normally.Delete All1Click Delete All to delete all the media files on the HP DreamScreen. A pop up window appears and asks you to confirm that you want to delete all music, photo, video files that are currently on the HP DreamScreen.Note: You can also drag a folder containing multiple files (even mixed media types) into the file folder displayed in the PC Utility window.
HP DreamScreen User Guide 412Click OK to confirm that you want to delete all the media files from the HP DreamScreen.OrClick Cancel to avoid deleting any files from the HP DreamScreen.Repair Now1Click Repair Now to restart the network services on your PC. A Summary window appears followed by a Components Wizard pop-up window. 2Wait for the Wizard to complete.3Click Next on the Summary window. The Options window appears.Check Now1Click Check Now to find out if your HP DreamScreen PC Software is current. An HP DreamScreen PC Updater dialog appears.2Click the red X in the upper right corner of the dialog box if the updater indicates your HP DreamScreen PC Software version is new.OrIf your HP DreamScreen PC Software needs to be updated, continue following the prompts and by clicking Next whenever it appears in a subsequent dialog box.HelpClick Help if you need help running HP DreamScreen PC Software. An online help session starts.BackClick Back to return to the HP DreamScreen PC Software main window.
42 HP DreamScreen User GuideTroubleshootingRemote control does not work or works erraticallyThe most likely cause of this is a weak battery. Replace the battery.Cannot establish a wireless connectionIncorrectly setting the following parameters can cause this problem:SSID - This is the network name (also known as the server set identifier, or SSID). Check for correct spelling. The SSID is case sensitive. If the router is set to broadcast the SSID, it will be scanned automatically during setup for the wireless network, but it might not be broadcast for security reasons. Security - The security type used by the router. The choices are: None, WEP (OPEN), WEP (SHARED), WPA-PSK (TKIP), WPA-PSK (AES), WPA2-PSK (TKIP), and WPA2-PSK (AES). You need to match the security type during your wireless network setup with the security type used in your router configuration for wireless connections.Password - The password for WEP and WPA security types is a key that is generated by a passphrase that is entered when the router is configured. The key is what you need to enter in the password field.MAC address - This is the Media Access Control (MAC) address, an address that is unique to every network card. If your router is configured to connect explicitly to wireless cards on a list, you must add the MAC address of HP DreamScreen to the list on your router. Once you make a wireless connection, you should be able to view the MAC addresses of all devices connected to your router. The MAC address of the HP DreamScreen wireless network card is displayed by default when you select Setup from the main menu and then, Network Setup. Then click OK. To adjust your router’s configuration, see the configuration instructions that came with your router.Correcting network streaming problemsIf the HP DreamSereen is connected to your home network, but it still cannot stream content from your computer, try the following solutions:1Finding the IP addresses of the HP DreamScreen and the computer Follow the instructions below to find the IP address of your HP DreamScreen:aMake sure the HP DreamScreen is connected to the network and can access the Internet.bUse the navigation controls to select Setup, and press OK. The Settings menu opens.cPress  or  to select Network, and then press OK. The Network Summary screen opens. You can see the IP information of your HP DreamScreen.dFind the IP address of the computer that you are using as a media server. From a command line, enter ipconfig -all Both the computer and HP DreamScreen must have the same Gateway address. If not, this is probably the problem. Change the gateway address to the same address for all devices that you want to share on the network.
HP DreamScreen User Guide 43eFrom your computer, open the cmd window again and type ping 192.168.xx.xx (the IP address of the HP DreamScreen that was found from the HP DreamScreen Network Summary screen).If the HP DreamScreen sends a reply from 192.168.xx.xx then your computer and your HP DreamScreen are able to send packet information across the network. Continue using these steps to find and correct the problem.If the message “Request timed out” appears, there is still a basic networking problem between your computer and your HP DreamScreen.2Ensure you have enabled Media Sharing Use the instructions in Starting or stopping media sharing with Windows Media Player 11 to check if you enabled media sharing on your computer. In many cases, even though you enabled sharing, Windows Media Player 11 asks to re-enable media sharing.If media sharing is enabled and the HP DreamScreen is listed among the devices that WMP11 can stream to, then: stop sharing and then restart sharing. This restart is usually good enough to make sure the WMP11 server can be seen by the HP DreamScreen.If you enabled media sharing, make sure the HP DreamScreen is among the devices allowed to receive content.3Ensure a firewall is not blocking the stream Windows Media Player 11 ensures that Windows firewall allows media streaming; however it is not unusual for a computer to have more than one firewall software installed and enabled. If you cannot stream any content and WMP11 is configured correctly, temporarily disable all firewalls (except Microsoft® Windows firewall). If that fixes the problem, configure the firewall settings so that WMP11 is considered a trusted application and the HP DreamScreen is part of your trusted network. For additional help, see the Microsoft FAQs on Firewall settings for WMP11.4Ensure the computer is using a private Network (Vista) If your computer is not using Windows Vista, skip this step.If your computer is running Microsoft Vista, make sure it is using a private and not a public network. Vista does not allow any media streaming in a public network. To check your settings, follow these steps at your computer:aClick Start, and select Network.bClick the Network and Sharing Center tab.cIf your network is Public, click Customize.dIn the Customize screen, change your network to Private.5Disabling unused LAN connections If your PC has or ever had more than one LAN card, the media server may have selected to stream on the port of the network card connection that is not connected to the HP DreamScreen. To check if there are multiple LAN connections on a computer with Windows access the Network connections window using the following steps at your computer:aClick Start, Connect to, and then click Show all connections.bCheck your connections under LAN or High-speed Internet.
44 HP DreamScreen User GuideIf there are more than one active Local Area Connection, right-click on a connection that the HP DreamScreen does not use and select Disable.The HP DreamScreen should be able to find and stream shared music and photos through Windows Media Player.Finding network settings of your HP DreamScreen To find the network settings of your HP DreamScreen, follow these steps:1Go to main menu of your HP DreamScreen. 2Select Setup and press OK.3Select Network and press OK. Your home network information is displayed.Finding the network settings of your computer You can find the network settings of a computer by following these simple steps:1Click Start on the taskbar, and then select Run.2On the Run window, type cmd, and then press the Enter key. A new command window should appear.3When the new command window appears, type ipconfig -all, and then press the Enter key. The network information for your computer displays.Finding the network settings of your router or access point The procedure to find the settings of your router, such as the SSID and wireless keys, varies and depends on the router brand and model. Most routers (or access points) are accessible using a computer browser, such as Internet Explorer.To find the network settings of your router or access point using the browser, follow these steps:1Open your browser on your computer.2Type the address of your access point, for example http://192.168.1.1If you do not know the address, follow the directions in Finding the network settings of your computer.3If needed, enter the administrator user name and password. If you do not remember it, you can reset the router to the default settings and read your router's user manual for the default user name and password settings. If you still need help, call the support line of your router's manufacturer or visit their web site.The SSID is usually listed in the home page of your router's settings. Finding your wireless encryption keys depends on the model of router, but most routers list keys under Wireless or Wireless Security or similar. From the router Web page you should be able to find all the wireless security information that you will need including: Whether the SSID is broadcast or notWhether wireless is enabled or disabledType of wireless securityNumber of bits used in the keysNote: The address of the Default Gateway is also the address of your router.
HP DreamScreen User Guide 45KeysStarting or Stopping Media Sharing with Windows Media Player 11To check your media sharing configuration using Windows Media Player 11 (WMP11):1Click Start, and then click Windows Media Player 11.2On the top menu, click Library, and then select Media Sharing. A Media Sharing dialog box appears. If sharing is configured and allowed for your HP DreamScreen, an icon with a green circle and a check mark appears. The name of your HP DreamScreen appears below the icon. A red X appears on the icon if media sharing is not allowed.3Select the icon for your HP DreamScreen, click Allow, and then click Apply to enable media sharing with your HP DreamScreen. Click OK when you are done.4Shut down your PC and your HP DreamScreen.5Turn on your HP DreamScreen. Then turn on your PC.Customer SupportIf you are still having problems, visit http://www.hp.com for more details and the latest information.You can also contact HP customer support by phone at 1-800-474-6836 (800-HP-Invent).Note: If no icon appears in the Media Sharing dialog, do the following:aClose the dialog. bTurn off your HP DreamScreen and then turn it back on. cGo back to step 2 and continue.Note: To stop media sharing, follow this procedure but click Deny in the Media Sharing dialog.
46 HP DreamScreen User GuideSpecificationsPanel SpecificationSize  HP DreamScreen 100: 254.5 mm (10.2 in)HP DreamScreen 130: 337.8 mm (13.3 in)Aspect ratio  HP DreamScreen 100: 16:9HP DreamScreen 130: 16:10Resolution  HP DreamScreen 100: 800 x 480HP DreamScreen 130:1280 x 800Contrast ratio 350:1PowerExternal Power Adapter Input: 100-240VAC, 50/60Hz, 0.8AOutput: 12VDC, 2.0AAudioInternal speakers StereoConnectivityUSB Ports 1 STD USB 2.0 Host1 STD mini USB 2.0 clientStorage/MediaInternal memory 2GBNote: Customer usable space is limited to 1.5GB Memory cards supported: CF – CompactFlash®  SupportedMS – Memory Stick Pro™  SupportedMMC – MultiMedia Card  SupportedSD™ – Secure Digital  SupportedSDHC™ – High Capacity  SupportedxD – xD-Picture Card™  SupportedMemory cards slot 1  SD/SDHC/MS/MS-Pro/MMC/xDMemory cards slot 2 CF I/II/MD
HP DreamScreen User Guide 47Media Files Supported:Video file formats (AVI, .MPG, .MP4)MPEG 1, MPEG 2 MP@MLMPEG 1 Compliant with ISO/IEC11172 Part 2Max resolution up to 352x240 @30Hz or 352x288 @ 25HzMax bit rate up to 1.5Mbps MPEG 2 Compliant with ISO/IEC 13818 Part 2Supports up to Main Profile @ Main Level (720x480 @ 30Hz or 720x576 @ 25Hz)Max bit rate up to 15MbpsMPEG 4 ASP@L5 Compliant with ISO/IEC 14496 Part 2Supports up to Advanced Simple Profile @ Level 5 (720x480 @ 30Hz or 720x576 @ 25Hz)No support for Resync marker, Global Motion Compensation, and Quarter-pel Motion CompensationMax bit rate up to 8MbpsH.264 BP/MP/HL@L3Compliant with ITU-T H.264Supports Simple, Baseline, Main, and High profiles up to Level 3 (720x480 @ 30Hz or 720x576 @ 25Hz)Does not support the following:Extended Profile: SVSP switching slicesExtended Profile: data partitioningHigh Profile: 4:2:2 and 4:4:4 YUV pixel formatsHigh Profile: residual color transformHigh Profile: bit depths other than 8 bits/pixel
48 HP DreamScreen User GuidePhoto file formats BMPJPEG (JPEG Compression)Compliant with ISO/IEC 10918 Part 1Supports Baseline Profile up to 4096x4096Does not support CMYK color spacePNG Compliant with ISO/IEC 15948Audio file formats MP3 Compliant with ISO/IEC 11172 Part 3Supports sampling frequency 32KHz, 44.1KHz, and 48KHzSupports bit rate up to 320Kbps for Layer 3Supports bit rate up to 384Kbps for Layer 2Supports 2-channelPCM/LPCM LPCM:2 channels, sampling frequency up to 48KHzPCM:5.1 channels, sampling frequency up to 192KHzWMA 9 Supports Microsoft Windows Media Audio 9 StandardSupports sampling frequency up to 48KHzSupports bit rate up to 384KbpsSupports 2-channelAAC Compliant with ISO/IEC 14496 Part 3Supports Low-Complexity profileSupports sampling frequency up to 48KHzSupports bit rate up to 192KbpsSupports 2-channelUser Interface/ControlButtons on the front of the HP DreamScreenCapacitive touch buttonsRemote control Infrared, with storage bay on the HP DreamScreenVertical Image Switch
HP DreamScreen User Guide 49Auto image rotate with HP DreamScreen orientationYes, but only during slide show or photo browsingPC softwareHP DreamScreen PC Software utilitySupported operating systemsMicrosoft Windows XP 32-bit (SP2 or later required for Media Player 11 functionality)Microsoft Windows Vista 32 and 64-bit
50 HP DreamScreen User GuideFrequently Asked QuestionsQuestion AnswerHow far away can I use the remote control?Up to 2.44m (8 ft.)Why can’t I display some of my Photos?Some photo/image file formats or resolutions are not supported. Please refer to the specifications.JPEG support up to 4K x 4K resolution, TIFF (4K x4K if JPEG content), PNG (1K x 1K), BMP (1K x 1K)Why can’t I play some of my music tracks?Some music file formats are not supported. Please refer to the specifications.Why can’t I play some of my video clips?Some video file formats are not supported. Please refer to the specifications.Can I delete photos from external memory cards, flash drives, or connected PC?No. You cannot use the HP DreamScreen to delete photos, videos, or music from any external source.Can I delete photos from internal memory?Yes. You can delete photos, videos, and music from internal memory.How can I switch to the internal memory?Remove all external memory cards and USB flash drives. The HP DreamScreen will automatically switch to internal memory.I have lost or damaged my remote and/or power adapter. Can I order replacements?Yes. Visit http://www.hp.com for more details.How can I find the latest information/FAQs about my HP DreamScreen?Visit http://www.hp.com for more details and the latest information.How can I get customer support from a live person over the phone?The HP customer support phone number is:1-800-474-6836 (800-HP-Invent)
HP DreamScreen User Guide 51Cleaning and Care TipsPlease power off the HP DreamScreen before cleaning.DO NOT spray or pour liquid cleaning agents directly on the screen or bezel.DO NOT use ammonia, alcohol, or abrasive detergent cleaning agents.Cleaning the Screen1Wipe screen with a clean, soft, lint-free cloth to remove dust and loose particles.2If further cleaning is required, apply an appropriate cleaning agent (approved for LCD displays) to a clean, soft, lint-free cloth and wipe the screen.Cleaning the HP DreamScreen and Backing1Use a clean, soft, lint-free cloth to remove dust and loose particles.2If desired, apply an appropriate cleaning agent to a clean, soft, lint-free cloth and wipe the appropriate surfaces.Maintenance GuidelinesTo enhance the performance and extend the life of the HP DreamScreen:Do not open the HP DreamScreen or attempt to service this product yourself. If the HP DreamScreen is not operating properly or has been dropped or damaged, contact your Hewlett-Packard authorized dealer, reseller, or service provider.Adjust only those controls that are described in the operating instructions.Keep the HP DreamScreen in a well-ventilated area, away from excessive light, heat, or moisture.Slots and openings in the cabinet are provided for ventilation. These openings must not be blocked or covered.Never push objects of any kind into cabinet slots or other openings.Unplug the HP DreamScreen from the power outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.Do not drop the HP DreamScreen or place it on an unstable surface.When removing the stand, you must lay the monitor face down on a soft area to prevent it from getting scratched, defaced, or broken.NOTE: Do not apply too much pressure on the screen to avoid damaging it.
52 HP DreamScreen User GuideRegulatory and Safety InformationMaterials disposalThe HP DreamScreen 130 contains the following material that might require special handling at end-of-life:Mercury in the fluorescent lamp in the display LCD.Disposal of mercury can be regulated because of environmental considerations. For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance (EIA) (http://www.eiae.org).Lithium battery for nonvolatile memory.The HP DreamScreen contains a lithium battery. This battery is designed to last the lifetime of the product and is not replaceable. When the HP DreamScreen has exceeded its useful life, it should be taken to an electronic equipment recycling facility. For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance (EIA) (http://www.eiae.org).Perchlorate Material—special handling may applyThe remote control’s battery may contain perchlorate and may require special handling when recycled or disposed of in California. For more information go to http://www.dtsc.ca.gov/hazardouswaste/perchlorate/.NOTE: The HP DreamScreen 100 does not contain mercury, but please ensure that you dispose of it properly at the end of product life.WARNING: Danger of explosion if the remote control battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions.
54 HP DreamScreen User Guide
HP DreamScreen User Guide 55IndexBBrowse 12CCalendar 24Care 51Cleaning 51Clock 25DDisposal of materials 52FFacebook 32–33Features 9Frequently Asked QuestionsFAQ 50GGetting Started 1HHP Smart Radio 37IInitial Setup 10–17Installing PC software 38KKeyboard Utility 6MMaintenance 51Managing Photos 14–15Menu 18Menu Options 18–37Music 30–31NNavigationKeyboard Utility 6Remote Control 4–5touch sensitive buttons 8Networkwired 19–21wireless 21–23PPandora 36PC 16PC Software 38–41PC software, installing 38PC Software, running 39Photo 28–29Photos, managing 14–15RRegulatory and Safety Information 52–53Remote Control 1, 4remote control battery 1Running PC Software 39SSetup 18–2424-Hour Time 19Automatic Software Update 24Brightness 23Date 19Device Name 18General Tab 18Info Tab 24Networkwired 19–21wireless 21–23Power Management 23Synchronize Device Clock With Internet Clock 23Time 19Time Zone 19US Daylight Saving Time 19Slide Show 12Snapfish 34–35Specifications 46TTroubleshooting 42–45UUpdate
56 HP DreamScreen User GuidePC Utility 41software 24software, automatic 24VVideo 27WWall Mounting 3Weather 26

Navigation menu