HMD global TA-1071 GSM/WCDMA/LTE Mobile Phone User Manual EN xxxxxx Argon QG DRAFT 0 1
HMD global Oy GSM/WCDMA/LTE Mobile Phone EN xxxxxx Argon QG DRAFT 0 1
UserManual.wiki
>
HMD global
>
TA 1071 User Manual
User manual
Navigation menu
Upload a User Manual
Namespaces
Wiki Guide
HTML
PDF
Info
Views
User Manual
Discussion / Help
Navigation
![• Switch the call restrictions off in your phone, such as call barring, fixed dialing, or closed user group.Take care of your deviceHandle your device, battery, charger and accessories with care.The following suggestions help you keep your device operational.• Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that corrode electronic circuits. If your device gets wet, remove the battery, and let the device dry.• Do not use or store the device in dusty or dirty areas.• Do not store the device in high temperatures. High temperatures may damage the device or battery.• Do not store the device in cold temperatures. When the device warms to its normal temperature, moisture can form inside the device and damage it.• Do not open the device other than as instructed in the user guide.• Unauthorized modifications may damage the device and violate regulations governing radio devices.• Do not drop, knock, or shake the device or the battery. Rough handling can break it.• Only use a soft, clean, dry cloth to clean the surface of the device.• Do not paint the device. Paint can prevent proper operation.• For optimal performance, switch the device off and remove the battery from time to time.• Keep the device away from magnets or magnetic fields.• To keep your important data safe, store it in at least two separate places, such as your device, memory card, or computer, or write down important info.Restore original settingsTo reset your phone to its original settings and to remove all your data, on the home screen, type in *#7370#.RecycleAlways return your used electronic products, batteries, and packaging materials to dedicated collection points. This way you help prevent uncontrolled waste disposal and promote the recycling of materials. Electrical and electronic products contain a lot of valuable materials, including metals (such as copper, aluminum, steel, and magnesium) and precious metals (such as gold, silver, and palladium). All materials of the device can be recovered as materials and energy. Crossed-out wheelie-bin symbolThe crossed-out wheelie-bin symbol on your product, battery, literature, or packaging reminds you that all electrical and electronic products and batteries must be taken to separate collection at the end of their working life. Do not dispose of these products as unsorted municipal waste: take them for recycling. For info on your nearest recycling point, check with your local waste authority.Battery and charger infoUse your device only with an original BV-6A rechargeable battery. Charge your device with AC-18 charger. Charger plug type may vary. HMD Global may make additional battery or charger models available for this device. Battery and charger safetyAlways switch the device off and unplug the charger before removing the battery. To unplug a charger or an accessory, hold and pull the plug, not the cord. When your charger is not in use, unplug it. If left unused, a fully charged battery will lose its charge over time.Always keep the battery between 15°C and 25°C (59°F and 77°F) for optimal performance. Extreme temperatures reduce the capacity and lifetime of the battery. A device with a hot or cold battery may not work temporarily.Accidental short-circuiting can happen when a metallic object touches the metal strips on the battery. This may damage the battery or the other object.Do not dispose of batteries in a fire as they may explode. Obey local regulations. Recycle when possible. Do not dispose as household waste.Do not dismantle, cut, crush, bend, puncture, or otherwise damage the battery in any way. If a battery leaks, do not let liquid touch skin or eyes. If this happens, immediately flush the affected areas with water, or seek medical help. Do not modify, attempt to insert foreign objects into the battery, or immerse or expose it to water or other liquids. Batteries may explode if damaged.Use the battery and charger for their intended purposes only. Improper use, or use of unapproved or incompatible batteries or chargers may present a risk of fire, explosion, or other hazard, and may invalidate any approval or warranty. If you believe the battery or charger is damaged, take it to a service centre before continuing to use it. Never use a damaged battery or charger. Only use the charger indoors. Do not charge your device during a lightning storm.Do not dispose of batteries in a fire as they may explode. Obey local regulations. Recycle when possible. Do not dispose as household waste.Small childrenYour device and its accessories are not toys. They may contain small parts. Keep them out of the reach of small children.Medical devicesOperation of radio transmitting equipment, including wireless phones, may interfere with inadequately shielded medical devices' function. Consult a physician or the medical device's manufacturer to determine if it is adequately shielded from external radio energy.Implanted medical devicesTo avoid potential interference, manufacturers of implanted medical devices recommend a minimum separation of 15,3 centimetres (6 inches) between a wireless device and the medical device. Persons who have such devices should:• Always keep the wireless device more than 15,3 centimetres (6 inches) from the medical device.• Not carry the wireless device in a breast pocket.• Hold the wireless device to the ear opposite the medical device.• Switch the wireless device off if there is any reason to suspect that interference is taking place.• Follow the manufacturer directions for the implanted medical device.If you have any questions about using your wireless device with an implanted medical device, consult your health care provider.Hearing Warning: When you use the headset, your ability to hear outside sounds may be affected. Do not use the headset where it can endanger your safety.Some wireless devices may interfere with some hearing aids.NickelThe surface of this device is nickel-free.VehiclesRadio signals may affect improperly installed or inadequately shielded electronic systems in vehicles. For more info, check with the manufacturer of your vehicle or its equipment.Only qualified personnel should install the device in a vehicle. Faulty installation may be dangerous and invalidate your warranty. Check regularly that all wireless device equipment in your vehicle is mounted and operating properly. Do not store or carry flammable or explosive materials in the same compartment as the device, its parts, or accessories. Do not place your device or accessories in the air bag deployment area.Potentially explosive environmentsSwitch your device off in potentially explosive environments, such as near gas pumps. Sparks may cause an explosion or fire resulting in injury or death. Note restrictions in areas with fuel; chemical plants; or where blasting operations are in progress. Areas with a potentially explosive environment may not be clearly marked. These usually are areas where you are advised to switch your engine off, below deck on boats, chemical transfer or storage facilities, and where the air contains chemicals or particles. Check with the manufacturers of vehicles using liquefied petroleum gas (such as propane or butane) if this device can be safely used in their vicinity.Certification information (SAR)This mobile device meets guidelines for exposure to radio waves as set forth by the Council of Europe (CE). Refer to the following.European RF Exposure InformationYour mobile device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves recommended by international guidelines. These guidelines were developed by the independent scientific organization ICNIRP and include safety margins designed to assure the protection of all persons, regardless of age and health. The guidelines use a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit for mobile devices is 2.0 W/kg and the highest SAR value for this device when tested at the ear is [xxx add value] W/kg*. As mobile devices offer a range of functions, they can be used in other positions, such as on the body. In this case, the highest tested SAR value is [xxx add value] W/kg* at the separation distance of 0.5 cm from the body. For electronic safety, maintain the separation distance with accessories containing no metal, that position handset a minimum of the above distance. Use of other accessories may not ensure compliance with RF exposure guidelines.* The tests are carried out in accordance with international guidelines for testing.This mobile device meets guidelines for exposure to radio waves as set forth by the Federal Communications Commission (FCC). Refer to the following.FCC RF Exposure InformationYour handset is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The guidelines are based on standards that were developed by independent scientific organization through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless handsets employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. The tests are performed in positions and locations (e.g. at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this model handset as reported to the FCC when tested for use at the ear is 1.16 W/kg, and when worn on the body in a holder or carry case, is 1.18W/kg.Body-worn Operation; This device was tested for typical body-worn operations with the handset kept 1.0 cm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 1.0 cm separation distance between the user's body and the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. The FCC has granted an Equipment Authorization for this model handset with all reported SAR levels evaluated as in compliance with the FCC RF emission guidelines. SAR information on this model handset is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/ after searching on FCC ID 2AJOTTA-1048 or 2AJOTTA-1071.Additional information on Specific Absorption Rates (SAR) can be found on the FCC website at www.fcc.gov/general/radio-frequency-safety-0.To send data or messages, a good connection to the network is needed. Sending may be delayed until such a connection is available. Follow the separation distance instructions until the sending is finished.During general use, the SAR values are usually well below the values stated above. This is because, for purposes of system efficiency and to minimise interference on the network, the operating power of your mobile is automatically decreased when full power is not needed for the call. The lower the power output, the lower the SAR value.Device models may have different versions and more than one value. Component and design changes may occur over time and some changes could affect SAR values.For more info, go to www.sar-tick.com. Note that mobile devices may be transmitting even if you are not making a voice call.About Digital Rights ManagementWhen using this device, obey all laws and respect local customs, privacy and legitimate rights of others, including copyrights. Copyright protection may prevent you from copying, modifying, or transferring photos, music, and other content.Copyrights and other noticesDeclaration of conformityHereby, HMD Global Oy (Ltd.) declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. A copy of the Declaration of Conformity can be found at www.nokia.com/mobile-declaration-of-conformity.FCC notice:This device complies with part 15 of the FCC rules and standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. For more info, go to www.fcc.gov/engineering-technology/electromagnetic-compatibility-division/radio-frequency-safety/faq/rf-safety. Any changes or modifications not expressly approved by HMD Global could void the user’s authority to operate this equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.Manufacturer and/or importer in EU: HMD Global Oy, Karaportti 2, 02610 Espoo, Finland.HMD Global Privacy Policy, available at http://www.nokia.com/phones/privacy, applies to your use of the device.©2018 HMD Global. All rights reserved. HMD Global Oy is the exclusive licensee of the Nokia brand for phones & tablets. Nokia is a registered trademark of Nokia Corporation.The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by HMD Global is under license.This product includes open source software. For applicable copyright and other notices, permissions, and acknowledgements, select *#6774# [check xx]on the home screen.All other trademarks are the property of their respective owners.Manufacturer’s limited warranty1. GeneralHMD Global Oy (hereinafter “Manufacturer”) provides this Manufacturer's Limited Warranty (“Warranty”) for the genuine Product (the “Product”), which Manufacturer has released for sale in the European Union, Iceland, Norway, and Switzerland (“Covered Country”). This Warranty is valid only in the Covered Country, where the Product was purchased through Manufacturer’s authorised sales channels, provided that the Product was intended for sale in that Covered Country. This Warranty covers and includes any statutory rights under any mandatory consumer protection laws of the Covered Country applicable to you, and also grants you specific, and as the case may be, additional rights, within the limits of what is permissible under such law. This Warranty does not limit the rights you may have under applicable consumer protection laws. You may have other rights based on local laws during or after the Warranty period. These rights are not excluded by this Warranty.The Product and its accessories shall be used in accordance with the instructions provided in the user guides and leaflets that come in the Product package and are also available at www.nokia.com/mobile-support.2. WarrantyThe Warranty period starts on the date the Product is sold to an end user for the first time, as evidenced by the original proof of purchase. Manufacturer warrants that the Product is free from defects in materials and workmanship (“Defect”) for:(i)Twenty-Four (24) months for the main device, and (ii) Six (6) months for the battery, charger, headset and any other accessory included in the sales package of the main device,unless the law requires that the Manufacturer offers a longer period, in which case the Warranty period is extended to cover the minimum period required by the law.To know more about your country specific Warranty, please visit www.nokia.com/mobile-support. During the Warranty period, any Defect covered by this Warranty will be remedied within a reasonable time, free of charge, through the replacement of the Product or accessory affected by the Defect. During the Warranty period, in case you suspect that your Product or any accessory has a Defect, please take it back to the point of sale where the Product has been purchased. The seller will perform a preliminary analysis on the Product or accessory and if found to be defective, the Product or accessory will be replaced. When replacing your Product, Manufacturer may use new or re-conditioned parts or Product except where the use of such re-conditioned parts or Product is barred by local law. In case local law should require the end user to be informed about the use of re-conditioned parts or Product, this Warranty document can be considered as the necessary notice in that regard. In case local law requires consent from the end user for the use of re-conditioned parts or Product, then such parts or Product will not be used till such consent has been obtained. When making a Warranty claim, you must present: (a) The Product or accessory that has allegedly presented a Defect; and(b) The legible and original proof of purchase, clearly indicating the name and the address of the seller, the place and date of purchase, the Product type and the serial number.To the fullest extent permitted by applicable law:a)No replacement will renew or extend the Warranty period unless such renewal or extension is mandated by local law, in which case the Warranty period is extended by the minimum time required by law;b)For countries where such renewal or extension is not mandated by local law, replacement Product or accessories provided under this Warranty will be covered by this Warranty for the remainder of the original Warranty period or for sixty (60) days from the date the replacement Product or accessory is returned to you, whichever is longer;c)Original Product or accessories not found to be defective will not be replaced and will be covered by this Warranty for the remainder of the original Warranty period;d)The Product or all accessories that have been replaced become seller’s property.Manufacturer does not warrant that software preinstalled by or on behalf of Manufacturer in the Product (or subsequent updates and upgrades) (together “Manufacturer software”) will meet your requirements, work in combination with any hardware or software not provided by Manufacturer, is uninterrupted or error free or that errors are correctable or will be corrected. For Manufacturer software-related errors, Manufacturer will make available the latest version of the Manufacturer software for reinstallation on your Product or, if that would not be possible, another remedy, which in Manufacturer’s reasonable discretion, satisfactorily addresses the error. Some Manufacturer software may be subject to separate license terms that are available with the software.Please always back up all data and content stored on your Product before taking your Product in for replacement since all data in your Product will be lost.Manufacturer and its authorized service providers are not responsible for the loss the of your data, programs or confidential information.3. What this Warranty does not coverManufacturer does not provide any Warranty for the following:A. When the Product is used in a way that is different from its ordinary use, such as:a) errors or damages caused by:i) exposure to moisture, to extreme electromagnetic field (such as damages caused by microwave oven), to dampness, to extreme thermal or environmental conditions or to rapid changes in such conditions, corrosion, oxidation, spillage of food or liquid, or to influence from chemical products, (ii) using your Product with, or connecting it to, any product, accessory, software, or service not manufactured or supplied by Manufacturer, (iii) any products combined with your Product by a third party, (iv) damage or errors caused by hacking, cracking, viruses, or other malware, or by unauthorized access to services, accounts, computer systems, or networks; or (v) other acts beyond Manufacturer’s reasonable control. b) If your Product's serial number, the mobile accessory date code, or the IMEI number has been removed, erased, defaced, altered or if these are illegible in any way.B. Not using your Product in accordance with the user guide.C. If your Product, has been (i) opened, repaired or modified by non-authorized third parties, or (ii) repaired with unauthorized spare parts. D. If you have not installed the latest software updates that are publicly available for your Product within a reasonable time of their release. You won’t be able to enforce this Warranty if you refuse to give possession of the Product to Manufacturer for analysis and investigation.This Warranty is not valid Outside of the Covered Country and doesn’t cover:1. User guides; 2. Any (i) third party software, settings, content, data, or links installed or downloaded onto your Product at any time, or (ii) Manufacturer and third-party services or enabling clients even if preinstalled by Manufacturer (please read the terms and conditions that may accompany the services as those will define your rights and obligations); 3. Any (i) normal wear and tear, (ii) reduced charging capacity of the battery resulting from its natural end of Product life, or (iii) pixel defects in your Product’s display that are within the scope of industry standards; and4. SIM card and/or any cellular or other networks or system on which your Product operates. If this Warranty does not cover your Product or the issue based on which it requires service, Manufacturer reserves the right to charge for the repair or replacement of your Product, as well as a handling fee.4. Limitation of Manufacturer’s liabilityTo the extent permitted by applicable law(s), Manufacturer shall not under any circumstances be liable, either expressly or implicitly, for any:1.Damages or losses of any kind whatsoever resulting from or relating to loss of, damage to, or corruption of, content or data or the re-creation or transfer thereof even if such loss, damage, or cor ruption was a r esult of (i) a Defect in you r Prod uct or (ii) an a ttemp t to repair your Product; and/or2.Loss of profit, productivity, functionality, business, contracts, revenues or anticipated savings, increased costs or expenses, or for any indirect, consequential or special loss or damage.To the extent permitted by applicable law, Manufacturer’s liability shall be limited to the purchase value of your Product.The limitations in this clause 4 shall not apply in case of Manufacturer’s negligence or intentional misconduct or in case of death or personal injury resulting from Manufacturer’s proven negligence.5. Other important noticesFor any further information related to your Product please visit www.nokia.com/mobile-supportYour Product may contain country-specific elements, including software. The replacement services available in a particular country may be limited to the Products and country-specific elements available in that country. Also, if your Product has been re-exported from its original destination to another country, your Product may contain country-specific elements that are not considered a Defect under this Warranty even if those elements or the Product would not be operational.HMD Global Oy (address: Karaportti 2, 02610 Espoo, Finland)EN_xxxxxx_Argon_QG_DRAFT_0_1.fm Page 2 Monday, December 18, 2017 1:39 PM](https://usermanual.wiki/HMD-global/TA-1071/User-Guide-3754563-Page-2.png)