HID Global RKCLB40E iClass Reader User Manual Installation guide

HID Global Corporation iClass Reader Installation guide

Installation guide

INSTALLATION GUIDEhidglobal.com An ASSA ABLOY Group brandiCLASS SE® Biometric/iCLASS SE Display ReaderRKCL40, RPKCL40, RKCLB40SRD MODEL: RPKCL40E, RKCLB40EParts1 - Reader and base plate assembly1 - Installation guide2 - Terminal connector 4 - M3.5 mm x 12 mm Phillips machine screw4 - #6-32 x .375” Phillips self-tapping machine screw4 - #6 x 1.5” Phillips sheet metal screw3 - #6-32 x .4375” Spanner security screw, anti-tamper (black)3 - #6-32 x .4375 Phillips security screw (black)1 - Mounting GasketRecommended• Cable, 6 conductor, 22 or 24 AWG [65 mm or 51 mm] Twisted Pair, Over-All Shield (Belden 3108A or equivalent) - RS-485 + power• Cable, 6 to 9 conductor, 22 or 24 AWG [65 mm or 51 mm] Over-All Shield, (Alpha 1296C or equivalent) - Wiegand + power• DC power supply• Metal or plastic double-gang junction box• Reader spacer when using metal junction boxes - see How to Order Guide• Security tool (for spanner security screw, anti-tamper) HID 04-0001-03SpecificationsPLT-02738 A.0PRODUCT BASE PART NUMBERINPUT VOLTAGE (VDC)CURRENT OPERATING TEMPERATURE CABLE LENGTH UL REF NUMBERSRDModelStandby AVG1Maximum AVG2PEAK3RKCL40 923N12VDC150mA 185mA 250mA -4° to 149° F(-20° to 65° C) Wiegand and RS-485500 ft - 22 AWG (152 m)300 ft - 24 AWG (91 m)RPKCL40Ex1x2x3RPKCL40ERPKCL40 923PRKCLB40 924N 165mA 215mA 275mA 14° to 122° F(-10° to 50° C) RKCLB40Ex1x2x3RKCLB40EUL Reference Number Decipheringx1 Reader Colors: K = Black, x2 Wiring: T = Terminalx3 Communications: R = Module1 Standby AVG - RMS current draw without a card in the RF eld.2 Maximum AVG - RMS current draw during continuous PIV card reads. Not evaluated by UL.3 Peak - highest instantaneous current draw during RF communication.
INSTALLATION GUIDEhidglobal.com An ASSA ABLOY Group brand© 2016 HID Global Corporation/ASSA ABLOY AB. All rights reserved. HID, the HID logo, and iCLASS are trademarks or registered trademarks of HID Global, or its licensors, in the U.S. and/or other countries. All other trademarks, service marks, and product or service names are trademarks or registered trademarks of their respective owners. This Installation Guide is for informational purposes only. HID makes no warranties, expressed or implied, in this summary. Company, product names and data used in sample output are fictitious. Specifications are subject to change without notice.RKCL40E, RPKCL40E, RKCLB40ESRD Model: RPKCL40E, RKCLB40EiCLASS SE Biometric/iCLASS SE DisplayInstallation1 MountingAttach Backplate and Mounting Gasket to Junction Box.2 WiringPigtail Terminal Description Pigtail Terminal DescriptionYellow P1-1 Beeper Input Red / Green P2-7 GPIO1 (RS232-T / RS485-FDX/HDX-A) Orange P1-2 LED Input (GRN) Ta n P2-6 GPIO2 (RS232-R / RS485-FDX/HDX-B) Black P1-3 Ground (RTN) Violet P2-5 *Open Collector Output / Tamper Red P1-4 +VDC White P2-4 **Wiegand Data 1 / Clock Drain P1-5 Unused Green P2-3 **Wiegand Data 0 / Data Brown P1-6 LED Input (RED) Pink P2-2 GPIO3 (RS485-FDX-Z) Blue P1-7 Hold Input Gray P2-1 GPIO4 (RS485-FDX-Y) *Tamper Output - When activated, output synchronizes to ground (default).**Dependent upon reader conguration. See the HTOG for Wiegand and Clock-in-Data congurations.Junction box not included.Install gasket Mounting holes for US double-gang electrical boxes.Reverse Configuration Rotating the backplate 180° allows for placing the LCD display on left and the reader on right.See Section B Alternate Reader Assembly for instructions, before proceeding to Section 2: Wiring.P1P2BeeperGRN LEDGND+VDCDRAINREDHOLDGPIO1GP102OC/TMPRDATA1/CLKDATA2/DATAGPIO3GPIO4BeeperGRN LEDGND+VDCDRAINREDHOLDGPIO1GP102OC/TMPRDATA1/CLKDATA2/DATAGPIO3GPIO4Terminal Reader(Terminal block and module position varies)ATTENTIONObserve precautions for handlingELECTROSTATIC SENSITIVE DEVICESNote: Previous iCLASS readers had reversed RS-485 wiring ( P2-7 & P2-6 - A & B). When upgrading, ensure proper connections as dened below.Wall backplate
INSTALLATION GUIDEhidglobal.com An ASSA ABLOY Group brand© 2016 HID Global Corporation/ASSA ABLOY AB. All rights reserved. HID, the HID logo, and iCLASS are trademarks or registered trademarks of HID Global, or its licensors, in the U.S. and/or other countries. All other trademarks, service marks, and product or service names are trademarks or registered trademarks of their respective owners. This Installation Guide is for informational purposes only. HID makes no warranties, expressed or implied, in this summary. Company, product names and data used in sample output are fictitious. Specifications are subject to change without notice.RKCL40E, RPKCL40E, RKCLB40ESRD Model: RPKCL40E, RKCLB40EiCLASS SE Biometric/iCLASS SE Display3 Attach to Backplate 4 Power & TestingStandard Configuration: Slide Reader Assembly towards the right to lock.Alternate Configuration: Slide Reader Assembly to the left to lock.Mount the Reader Assembly (Reader, LCD Assembly, and reader backplate) to the wall backplate.Install Security screws.
INSTALLATION GUIDEhidglobal.com An ASSA ABLOY Group brand© 2016 HID Global Corporation/ASSA ABLOY AB. All rights reserved. HID, the HID logo, and iCLASS are trademarks or registered trademarks of HID Global, or its licensors, in the U.S. and/or other countries. All other trademarks, service marks, and product or service names are trademarks or registered trademarks of their respective owners. This Installation Guide is for informational purposes only. HID makes no warranties, expressed or implied, in this summary. Company, product names and data used in sample output are fictitious. Specifications are subject to change without notice.RKCL40E, RPKCL40E, RKCLB40ESRD Model: RPKCL40E, RKCLB40EiCLASS SE Biometric/iCLASS SE DisplayA Biometric Reader Proper UsageEnsure a good quality Contact:• Do not press too hard• Do not move during image acquisition• Leave your finger on the sensor at least 2 seconds• Do not slide or roll your finger across the sensor CleaningFor optimum performance, it is recommended that the user clean the bio-reader periodically.The use of a dry cloth is recommended to clean the acquisition surface. Caution: Acidic liquids, alcohol or abrasive materials are prohibited. In order not to scratch the surface, remove all dust and residue with gentle movements. B Credential Presentation Best PracticesTo ensure a successful read of a card:1. Hold card between the thumb and index finger.2. Present the card so that the index finger creates a spacing between the card and the reader face. Do not place the card flat on the reader.3. Place the card parallel to the reader form factor. Do not angle to the right or left4. Place the card parallel to the reader face. Do not angle the card up or down from the reader face.Acquisition Surface
INSTALLATION GUIDEhidglobal.com An ASSA ABLOY Group brand© 2016 HID Global Corporation/ASSA ABLOY AB. All rights reserved. HID, the HID logo, and iCLASS are trademarks or registered trademarks of HID Global, or its licensors, in the U.S. and/or other countries. All other trademarks, service marks, and product or service names are trademarks or registered trademarks of their respective owners. This Installation Guide is for informational purposes only. HID makes no warranties, expressed or implied, in this summary. Company, product names and data used in sample output are fictitious. Specifications are subject to change without notice.RKCL40E, RPKCL40E, RKCLB40ESRD Model: RPKCL40E, RKCLB40EiCLASS SE Biometric/iCLASS SE DisplayE Alternate Reader AssemblyThe following steps reconfigure the reader assembly to position the LCD Display component on the left side of theassembly. 1. Disassemble the Reader.• Remove the Reader from the backplate.• Carefully unplug the ribbon cable from the module in the back of the Reader. Caution: Do not pull on the ribbon cable as this may damage the connection to the Reader LCD Display connector.• Remove the LCD Display from the backplate.• Gently pull the ribbon cable through the backplate. 2. Reassemble with the LCD Display on the left side of the assembly.• Rotate the backplate so that the large cutout for the power cable is on the left• Gently route the ribbon cable back through the backplate slots, as shown below• Plug the ribbon cable back into the module (back of Reader) and ensure module is fully seated into the reader• Attach the LCD Display to the backplate (this must be installed first, as the Reader will fit slightly over the LCD Display)• Attach the Reader to the backplate (power cable must be threaded through the large square cutout on the backplate)• Return to Section 2.Test card Standard Configuration Alternate Configuration LCD Display Reader LCD Display Reader Ribbon cable Reader Backplate Reader LCD Display Reader BackplateRibbon cable
INSTALLATION GUIDEhidglobal.com An ASSA ABLOY Group brand© 2016 HID Global Corporation/ASSA ABLOY AB. All rights reserved. HID, the HID logo, and iCLASS are trademarks or registered trademarks of HID Global, or its licensors, in the U.S. and/or other countries. All other trademarks, service marks, and product or service names are trademarks or registered trademarks of their respective owners. This Installation Guide is for informational purposes only. HID makes no warranties, expressed or implied, in this summary. Company, product names and data used in sample output are fictitious. Specifications are subject to change without notice.RKCL40E, RPKCL40E, RKCLB40ESRD Model: RPKCL40E, RKCLB40EiCLASS SE Biometric/iCLASS SE DisplayRegulatoryThe final product, containing the modular transmitter must be labeled with its own FCC ID and IC ID. If the FCC & IC ID is not visible, when the module is installed inside another device, then the final assembly label must contain the FCC and IC ID numbers with a statement such as follows: “Contains Transmitter Module with FCC ID JQ6-ICLASSBTM and IC ID 2236B-ICLASSBTM”.ULConnect only to a Listed Access Control / Burglary power-limited power supply. These readers are intended to be used with listed (UL294) control equipment. Suitable for outdoor use. Only Wiegand and RS-485 communications have been evaluated by UL.FCCThis device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.CAUTION: Any changes or modifcations to this device not explicitly approved by the manufacturer could void your authority to operate this equipment. Indala Prox products RP10EL, RP15EL, RP30EL, RP40EL and RPK40EL are certified for FCC, Canada Radio Certification and CE Marking only.Canada Radio CeRtiFiCationThis device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.Ce MaRkingHID Global hereby declares that these proximity readers are in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.Por el presente, HID Global declara que estos lectores de proximidad cumplen con los requisitos esenciales y otras disposiciones relevantes de la Directiva 1999/5/EC.HID Global déclare par la présente que ces lecteurs à proximité sont conformes aux exigences essentielles et aux autres stipulations pertinentes de la Directive 1999/5/CE.A HID Global, por meio deste, declara que estes leitores de proximidade estão em conformidade com as exigências essenciais e outras condições da diretiva 1999/5/EC.HID Global bestätigt hiermit, dass die Leser die wesentlichen Anforderungen und anderen relevanten Bestimmungen der Richtlinie 1999/5/EG erfüllen.HID Global dichiara che i lettori di prossimità sono conformi ai requisiti essenziali e ad altre misure rilevanti come previsto dalla Direttiva europea 1999/5/EC.Download copies of the R&TTE Declaration of Conformity (DoC) at http://www.hidglobal.com/certifications.BRaziLCompliance Statement Este produto está homologado pela ANATEL, de acordo com os procedimentos regulamentados pela Resolução 242/2000, e atende aos requisitos técnicos aplicados. Para maiores informações, consulte o site da ANATEL - www.anatel.gov.br This product is homologated at ANATEL according to procedure regulated by Resolution 242/2000, and it complies with the applicable technical requirements. For more information, consult ANATEL website - www.anatel.gov.br RF Warning Statement Per Article 6 of Resolution 506, equipment of restricted radiation must carry the following statement in a visible location: Este equipamento opera em caráter secundário, isto é, não tem direito a proteção contra interferência prejudicial, mesmo de estações do mesmo tipo, e não pode causar interferência a sistemas operando em caráter primário. This equipment operates in secondary character, meaning it does not have the right of protection against harmful interference, even against those the same character, and it cannot cause any interference to systems operating in the primary character.
INSTALLATION GUIDEhidglobal.com An ASSA ABLOY Group brand© 2016 HID Global Corporation/ASSA ABLOY AB. All rights reserved. HID, the HID logo, and iCLASS are trademarks or registered trademarks of HID Global, or its licensors, in the U.S. and/or other countries. All other trademarks, service marks, and product or service names are trademarks or registered trademarks of their respective owners. This Installation Guide is for informational purposes only. HID makes no warranties, expressed or implied, in this summary. Company, product names and data used in sample output are fictitious. Specifications are subject to change without notice.RKCL40E, RPKCL40E, RKCLB40ESRD Model: RPKCL40E, RKCLB40EiCLASS SE Biometric/iCLASS SE DisplayiCLASS Keypad ReadersFOTO SELO ANATELFabricante: HID Global CorporationModelo: iCLASS SE RK40E, multiCLASS RPK40EEste produto esta aprovada pela Anatel, de acordo com os procedimentos regulamentados pela Resolução nº 242/2000 e atende aos requisitos técnicos aplicados.“Este equipamento opera em caráter secundário, isto é, não tem direito a proteção contra interferência prejudicial, mesmo de estações do mesmo tipo, e não pode causar interferência a sistemas operando em caráter primário”iCLASS Non-Keypad ReadersFOTO SELO ANATELFabricante: HID Global CorporationModelo: iCLASS SE R10, multiCLASS RP10E, multiCLASS RP30E iCLASS SE R40E, multiCLASS RP15E, multiCLASS RP40EEste produto esta aprovada pela Anatel, de acordo com os procedimentos regulamentados pela Resolução nº 242/2000 e atende aos requisitos técnicos aplicados.“Este equipamento opera em caráter secundário, isto é, não tem direito a proteção contra interferência prejudicial, mesmo de estações do mesmo tipo, e não pode causar interferência a sistemas operando em caráter primário”
hidglobal.com An ASSA ABLOY Group brandINSTALLATION GUIDE RKCL40E, RPKCL40E, RKCLB40ESRD Model: RPKCL40E, RKCLB40EiCLASS SE Biometric/iCLASS SE DisplayHID GlobalAmericas & Corporate611 Center Ridge DriveAustin, TX 78758USASupport: 866-607-7339Fax: 949-732-2120Asia Pacific19/F 625 King's RoadNorth Point, Island EastHong KongSupport: 852-3160-9833Fax: 852-3160-4809Europe, Middle East & AfricaPhoenix RoadHaverhill, Suolk CB9 7AEEnglandSupport: 55 11 5514-7100Fax: 55 11 5514-7109For additional oces around the world, see www.hidglobal.com corporate oces.HID Global Customer Support: www.hidglobal.com/supportEquipment8T29ACC Control ReaderGeneral SignalingEquipmenttaiwanAccording to “Administrative Regulations on Low Power Radio Waves Radiated Devices” Without permission granted by the NCC, any company, enterprise, or user is not allowed to change frequency, enhance transmitting power or alter original characteristic as well as performance to a approved low power radio-frequency devices. The low power radio-frequency devices shall not influence aircraft security and interfere legal communications; If found, the user shall cease operating immediately until no interference is achieved. The said legal communications means radio communications is operated in compliance with the Telecommunications Act. The low power radio-frequency devices must be susceptible with the interference from legal communications or ISM radio wave radiated devices.Japan MiC“ この装置は総務省の型式指定を受けています。”(総務省指定番号は第AC-ｘｘｘｘｘ号です)本製品は電波を使用したRFID 機器の読み取り・書き込み装置です。そのため使用する用途・場所によっては、医療機器に影響を与える恐れがありますSingapoRekoRean kCCComplies with IDA Standards DA103548R10E, R15E, R30E, and R40E RP10E, RP15E, RP30E and RP40ERK40E RPK40E항목 규격송신주파수 RFID:13.56 MHz RFID:13.5607 MHz, LPD:125 KHz수신주파수 RFID:13.56 MHz RFID:13.56 MHz, LPD:125 KHz출력 RFID: 10m에서 47.544mv이하RFID: 10m에서 47.544mv이하.LPD:3 m 거리에서 500 ㎶/m이하전원 DC 16.0V전파형식 A1D발진방식 X-tal X-tal (13.56MHz) Resonator(125kHz)변조방식 AM AM(13.56MHz), FSK(125kHz)

Navigation menu