HBC radiomatic M40004 Crane Remote Control Transmitter User Manual statement page

HBC-radiomatic GmbH Crane Remote Control Transmitter statement page

Contents

statement page

Operating InstructionsRadio Transmitter micron 4 IndustrialBEMIC4_V2-3_US-L.DOC [ Word 97 ] FL Page 7 / 18HBC-radiomatic, Inc. , Cincinnati , Ohio 45242 , USAInformation and specifications subject to change without notice. 2001-05-16Radio Control System2.3 Operator Safety Instructions! Warning to our Users :In accordance to the rules and regulations of the FCC, any changes or modifications made toour transmitter or receiver by you without the express written consent of HBC-radiomatic, Inc.could void your authority to operate the equipment under FCC’s rule 15.21 !! Before beginning crane operation, position yourself so that you have a clear and completeoverview of the working radius of the crane or machine.! To operate, hold the transmitter securely in your hand. Use the optional wrist strap. Followthese instructions to ensure personal safety.! Depending on your angle or position to the crane or machine, the transmitter control commands“trolley left” and “trolley right” appear to interchange ! It is essential that you take yourbearings to the crane or machine into due consideration before operating equipment.! In case of an emergency or any disturbances within the working range of the crane or machine,switch the transmitter OFF immediately by pressing the STOP pushbutton. Should thetransmitter show signs of technical failure or breakdown, disconnect the radio control systemimmediately !! Switch the transmitter OFF during breaks and after finishing work to avoid any misoperation ofcrane or machine by unintended activation of the operator controls.– These precautions are particularly important whenever changing your position or climbingover an obstacle.! Never leave an activated transmitter unattended. The operator undertakes to follow and complywith the authoritative regulations for worker safety and accident prevention (e. g. VBG 9).Note :– In the event of an interruption of the radio link during a working cycle – what canoccasionally happen – both transmitter and receiver automatically shut down (so-called"compulsory switch-off").To reactivate the system release all operator controls, such as pushbuttons or momentarycontacts, and allow the control elements to return to their zero position. Press the"ON/Horn" pushbutton. The system must be reactivated before the crane or machine canreact to control commands ! This feature hinders any uncontrolled or unwanted crane ormachine movement, should the radio link be interrupted.– When operating a crane by means of a radio control system for the first time, you may missthe physical contact to the crane that you were used to in the operating stand. As you are nolonger in the crane and can no longer sense the starting of the crane movements asdistinctly, crane reactions will appear sluggish or dull.

Navigation menu