Grandstream Networks GWN7600LR Long Range Wi-Fi Access Point User Manual quick Start Guide

Grandstream Networks, Inc. Long Range Wi-Fi Access Point quick Start Guide

Contents

quick Start Guide

For Warranty and RMA information, please visit www.grandstream.comGrandstream Networks, Inc.126 Brookline Ave, 3rd FloorBoston, MA 02215. USATel : +1 (617) 566 - 9300 Fax: +1 (617) 249 - 1987 www.grandstream.com GWN7600LR Enterprise 802.11ac Wave-2 Outdoor Long Range WiFi Access Point Quick Installation GuideIn all EU member states, operation of 5150-5350 MHz is restricted to indoor use only.
~1~ ~2~OVERVIEWThis WiFi long range access point is designed to provide extended coverage support. Ideal for outdoor WiFi solutions thanks to its waterproof casing and heat resistant technology. The GWN7600LR comes equipped with dual-band 2x2:2 MU-MIMO with beam-forming technology and a sophisticated antenna design for maximum network throughput and extended WiFi coverage range of up to 300 meters. To ensure easy installation and management, the GWN7600LR uses a controller-less distributed network management design and an embeded controller within the product’s web user interface. This allows each access point to manage a network of up to 30 GWN76xx series APs independently without needing separate controller hardware/software and without a single point-of-failure. Its easy installation and management features packed with extra coverage support and advanced performance features make the GWN7600LR an ideal enterprise AP for mid-size wireless network deployments. 1 x GWN7600LR Access Point1 x Quick Installation Guide 1 x GPL Statement4 x Screw (PM8 x 115)4 x Locknut4 x Screws and AnchorsEN1 x Base BracketPACKAGE CONTENTS2 x Assembled Screw1 x Cover BracketGWN7600LR PORTSPort DescriptionNET/POE Ethernet RJ45 port (10/100/1000Mbps) supporting PoE.NET Ethernet RJ45 port (10/100/1000Mbps) to your router or another GWN76xx.RESET Factory reset button. Press for 7 seconds to reset factory default settings.POWERING AND CONNECTING THE GWN7600LRNetwork Port RJ45 Ethernet Cable to power over Ethernet (PoE) Switch ●Do not attempt to open, disassemble, or modify the device. ●Do not expose this device to temperatures out the range of -30 °C to 60 °C for operating and -30°C to 70°C for storage ●Do not expose the GWN7600LR to environments outside of the following humidity range: 5-95% RH (non-condensing). ● Do not power cycle your GWN7600LR during system boot up or rmware upgrade. You may corrupt rmware images and cause the unit to malfunction.PRECAUTIONSGWN7600LR can be powered on via PoE switch using following steps:Step 1: Plug a RJ45 Ethernet cable into the network port of the GWN7600LR.Step 2: Plug the other end into the uplink port of the power over Ethernet (PoE) switch.
~3~ ~4~Horizontal Mounting HARDWARE INSTALLATION GWN7600LR can be mounted horizontally or vertically on a metal bar. Please refer to the following steps for the appropriate installation. Vertical Mounting4. Connect the Ethernet cable (RJ45) to the correct ports of your GWN7600LR. 5. Align the GWN7600LR with the Base Bracket and pull it down to the right position.6. Install the 2x Assembled screws to x GWN7600LR on the Mounting Bolt.1. Prepare the Cover Bracket by inserting the 4 screws (PM8) into corresponding holes.2. Attach the Cover Bracket with screws on the vertical Mounting Bolt where GWN7600LR will be installed.3. Assemble the Base Bracket with the Cover Bracket using provided locknuts and screws (PM8).1. Prepare the Cover Bracket by inserting the 4 screws (PM8) into corresponding holes.2. Attach the Cover Bracket with screws on the horizontal Mounting Bolt where GWN7600LR will be installed.3. Assemble the Base Bracket with the Cover Bracket using provided locknuts and screws (PM8).4. Connect the Ethernet cable (RJ45) to the correct ports of your GWN7600LR. 5. Align the GWN7600LR with the Base Bracket and pull it down to the right position.6. Install the 2x Assembled screws to x GWN7600LR on the Mounting Bolt.1234512345
~5~ ~6~CONNECT TO GWN7600LR DEFAULT WIFI NETWORK GWN7600LR can be used as standalone access point out of box, or after factory reset with Wi-Fi enabled by default.After powering the GWN7600LR and connecting it to the network, GWN7600LR will broad-cast a default SSID based on its MAC address GWN[MAC’s last 6 digits] and a random password.Note: GWN7600LR’s default SSID and password information are printed on the MAC tag of the unit. Method 2: Discover GWN7600LR using GWN Discovery Tool1. Download and install GWN Discovery Tool from the following link:http://www.grandstream.com/tools/GWNDiscoveryTool.zip 2. Open the GWN DiscoveryTool, and click on Scan.3. The tool will discover all GWN76XX Access Points connected on the network showing their MAC and IP addresses.4. Click on Manage Device to be redirected directly to the GWN7600LR’s conguration interface, or type in manually the displayed IP address on your browser.Notes : ●Make sure that the GWN7600LR is not already paired with another GWN76xx Access Point as slave, or GWN7000 Router Series, otherwise the conguration interface cannot be accessed. ● If the GWN7600LR is already paired, make sure to unpair it rst, or do a factory reset. ●It is customer’s responsibility to ensure compliance with local regulations for frequency bands, transmit power and others.A computer connected to the GWN7600LR’s SSID, or to the same network as the GWN-7600LR can discover and access its conguration interface using one of the below methods:Method 1: Discover GWN7600LR using its MAC Address1. Locate the MAC address on the MAC tag of the unit, which is on the underside of the device, or on the package.2. From a computer connected to same network as the GWN7600LR, type in following ad-dress using GWN7600LR’s MAC address on your browser https://gwn_<mac>.localExample: If a GWN7600LR has the MAC address 00:0B:82:8C:4D:F8, this unit can be ac-cessed by typing https://gwn_000b828c4df8.local on the browser. ACCESSING THE CONFIGURATION INTERFACEUsing one of the above methods, the login screen will appear. Type in “admin” in both User-name and Password elds and click on Sign In.Refer to online documents and FAQ for more detailed information: http://www.grandstream.com/our-productsLabel's content is for reference only, subject to actual production.
Any Changes or modifications not expressly approved by the party responsible forcompliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the followingtwo conditions: (1) This device may not cause harmful interference, and (2) this devicemust accept any interference received, including interference that may cause undesiredoperation. FCC Caution:Note: This equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonableprotection against harmful interference in a residential installation. This equipment generates,uses and can radiate radio frequency energy and, if not installed and used in accordance withthe instructions, may cause harmful interference to radio communications. However, there isno guarantee that interference will not occur in a particular installation. If this equipment doescause harmful interference to radio or television reception, which can be determined by turningthe equipment off and on, the user is encouraged to try to correct the interference by one ormore of the following measures:—Reorient or relocate the receiving antenna.—Increase the separation between the equipment and receiver.—Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected.—Consult the dealer or an experienced radio/TV technician for help.FCC Radiation Exposure Statement:This equipment complies with FCC radiation exposure limits set forth for anuncontrolled environment. This equipment should be installed and operated withminimum distance 20cm between the radiator& your body.This transmitter must not be co-located or operating in conjunction with any other antenna ortransmitter.


Navigation menu