Gospell Smarthome Electronic GD8723 WIFI REARVIEW CAMERA User Manual GD8723 manual 640x480

Shenzhen Gospell Smarthome Electronic Co., Ltd. WIFI REARVIEW CAMERA GD8723 manual 640x480

Contents

Users Manual Part Two

14134. Touch “Forget” to remove network records. Then, reconnect to the network using the previous WiFi connection methods.Operations for Android system clientTouch “Settings” on the home screen of your device.Ulife toolsULIFE TEAM / Media a nd v id eo(2)OPENTo install software for your smart mobile device that runs an Android system:1. Turn on interlligent mobile device and enter Google Play store. Search for the software “Ulife tools”, and download.2. Touch Install. The software can be installed on your device.3. After the installation is complete, the icon of the software is displayed on the home screen, as shown in the following figure. Installation APP softwareWiFi ConnectionTouch “WLAN” and select your camera (The initial SSID is “ ”) and connect the WiFi with default password ( ).WIFICAMERA88888888Note handle to select WIFI channels. then reconnect the WIFI.: When the WIFI connection problem, the user can turn on / off the power switch of
1615Device OperationNote: If the WiFi interruption occurs when you view an image, or the picture viewing stops. In this case, exit the application and check whether the WiFi connection is proper.Open the APP, if the wifi connection is successful, the video could be seen in the APP as shown below.SettingsTouch this icon to display the settings menu.You can set a new SSID or password for your WiFi network.Change the WiFi channel.Take a photoRecord a video
1817 1.Touch “Settings” on the home screen of your device.After you change the SSID or password, touch Settings on the home screen to forget this network and reconnect your device to the network. Otherwise, a message indicating a login error is always displayed. To forget this network:Important Notes:Touch the "Browsing files" in can view the picture or video.Enter the pictures can choose to send the file.the settings and 2.Touch to search for the WiFi name.3.Then touch the modified WiFi camera.WLAN
20194.Touch “Forget” to remove network records. Then, reconnect to the network using the previous WiFi connection methods. Note the batteries must be replaced. If you forget the SSID and password of the smart mobile device, you can press Reset on the product for 5 seconds to enable factory defaults.: Normally the yellow light is on. When the red light is on, the battery voltage is low and* Actual transmission range of wireless monitoring may vary according to the weather, location, interference or building construction.* All specifications are subject to minor change without prior notice.< 400mA260 x 50 x 40 (mm) (Excluding Flexible Tube) 174g20~85%RH-20 ~55 /14 F~122 FO O O OC Ccamera>1 hoursMinimum Illumination Horizontal Viewing Angle Consumption Current (Max.)Handle WeightImaging SensorEffective PixelsPower SupplyOperating TemperatureOperating Humidity (Max.)Waterproof CapacityTransmission FrequencyModel No.Tube DiameterWorking TimeAA x (1.5V x 4)4 batteries CMOS2400~2483.5MHz IP67 (for lens/tube only)Transmit Power<14dBmReceiver Sensitivity11b:-90,11g/n:-72 dBmTransmission Rate1--150M bpsFrequency Stability±20 PPmUnobstructed Effective Range≥10 mWorking VoltageDC 4V--6.5VNTSCPAL0 Lux (LED ON) GD8723SpecificationsDimensions (W D H)x x Modulation /Demodulation Mode802.11g/n：OFDM (BPSK, QPSK, 16QAM, 64QAM)802.11b：DSSS (CCK, DQPSK, DBPSK)45o9mm640 x 480640 480x Picture/Video Pixels640 480 x Frame Rate20 frame/second
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference; (2) This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.The graphics included in this user manual are subject to minor change without notice.FCC information21uncontrolled environment . FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Navigation menu