Gibson Innovations OKAX9 wireless portable speaker User Manual revised

Gibson Innovations Limited wireless portable speaker revised

Contents

User manual-revised

User manualOKAX9
1ENContents1 Important 2Hearing safety 22 Your Bluetooth speaker 3Introduction 3What's in the box 3Overview of the speaker 43 Get started 5Power supply 5Switch on or go to standby mode 54 Use Bluetooth devices 6Connect a Bluetooth-enabled device 6Play from a Bluetooth-enabled device 7Control your phone call 75 Other features 8Listen to an external device 8Play through USB 8Adjust volume 9Listen through a headphone 96 Product information 10Specications 107 Troubleshooting 11General 118 Notice 12
2EN1 ImportantWarning • Never remove the casing of this speaker. • Never lubricate any part of this speaker. • Never place this speaker on other electrical equipment. • Keep this speaker away from direct sunlight, naked amesorheat.• Make sure that there is enough free space around the device for ventilation.• Use only power supplies listed in the user manual.• Only use attachments or accessories speciedbythemanufacturer.• The battery shall not be exposed to excessiveheatsuchassunshine,reorthelike.• The device shall not be exposed to dripping or splashing. • Do not place any sources of danger on thedevice(e.g.liquidlledobjects,lightedcandles). • Where the plug of the Direct Plug-in Adapter is used as the disconnect device, the disconnect device shall remain readily operable.Hearing safetyCaution • To avoid hearing damage, limit the time you use the headphones at high volume and set the volume to a safe level. The louder the volume, the shorter is the safe listening time.Be sure to observe the following guidelines when using your headphones.• Listen at reasonable volumes for reasonable periods of time.• Be careful not to adjust the volume as your hearing adapts.• Do not turn up the volume so high that you can't hear what's around you.• You should use caution or temporarily discontinue use in potentially hazardous situations.• Excessive sound pressure from earphones and headphones can cause hearing loss.Note • The type plate is located on the bottom of the product.
3EN2 Your Bluetooth speakerThank you for purchasing an Onkyo product. Please read this manual carefully before making any connections or using this product. By following these instructions, you’ll get the best audio performance and the most listening pleasure from your Onkyo product. Keep this manual for future reference.IntroductionWith this speaker, you can• enjoy audio from your Bluetooth-enableddevices, USB devices or other external audio devices; and• control the incoming phone call throughBluetooth connection.What's in the boxCheck and identify the contents of your package:• Main unit• Power adapter• 3.5mm audio cable• USB cable• Printed materials•
4ENOverview of the speaker a button/indicator• Pressbrieytoswitchonorgotostandby mode.• In standby mode, press and hold to switch off.• Indicate the power status.b • Start, pause, or resume play.• Press to answer an incoming call.• During a call, press to end the current call.c -/+• Adjust volume.d button/indicator• Press and hold for 2 seconds to enter pairing mode manually.• Press and hold for 7 seconds to clear pairing information.• Indicate the Bluetooth connection status.e DC IN socket• Connect the power adapter.• Charge the built-in battery of the speaker.f AUDIO IN socket• Play an external audio device through USB.ab cdefghg AUX IN socket• Connect an external audio device.h • Connect a headphone.
5EN3 Get startedAlways follow the instructions in this chapter in sequence.Power supplyEither AC power or battery can be used as power supply of this product.Option 1: AC powerCaution • Risk of product damage! Make sure that the power voltage corresponds to the voltage printed on the back or underside of the speaker. • Risk of electric shock! When you unplug the AC adapter, always pull the plug from the socket. Never pull the cord.• Connect the power adaptor to: • the DC IN socket at the back of the speaker.• the wall outlet. Option 2: Battery powerThe speaker can also be powered by the built-in rechargeable battery. NoteSystem status Battery status Power LED statusOn/off Low power (less than 10%)Flashing redOn Under charging Flashing whiteOn Fully charged Solid whiteSwitch on or go to standby mode• Press to switch the speaker on. » If the speaker is fully charged, the power indicator turns solid white. » If the speaker is being charged, the powerindicatorasheswhite. » If the speaker is in low battery (with less than 10% power), the power indicatorashesred.• To enter standby mode, press briey. » The power indicator is dimmed in white.• To switch off when the speaker is on or in standby mode, press and hold for two seconds. » The power indicator turns off.Tip • In Bluetooth mode, if Bluetooth connection is invalid or music playback is stopped for 15 minutes, this speaker switches to standby mode automatically. • In AUX IN mode, if the audio-in cable is disconnected or music playback is stopped for 15 minutes, this speaker switches to standby mode automatically. • Rechargeable battery has a limited number of charge cycles. The battery life and number of charge cycles vary by use and settings. • It takes you approximately three hours to fully charge the battery.To charge the built-in battery:• Connect to AC power supply.
6EN4 Use Bluetooth devicesWith this speaker, you can listen to audio from Bluetooth-enabled devices and control the incoming call through Bluetooth.Connect a Bluetooth-enabled deviceNote • Make sure that your Bluetooth device is compatible with this speaker. • Before pairing a device with this speaker, read its user manual for Bluetooth compatibility. • The speaker can memorize up to 8 paired devices. • Make sure that Bluetooth function is enabled on your device, and your device is set as visible to all other Bluetooth devices. • Any obstacle between this speaker and a Bluetooth device can reduce the operational range. • Keep away from any other electronic device that may cause interference. • The operational range between this speaker and a Bluetooth device is approximately 10 meters (30 feet).The speaker can connect up to 2 Bluetooth-enabled devices at the same time.1 Press and hold on the speaker for twoseconds. » TheBluetoothindicatorashesblue.2 On your Bluetooth device, enableBluetooth and search for Bluetooth devices (refer to the user manual of the device).3 When [Onkyo X9] is displayed onyour device, select it to start pairing and connection. If necessary, enter the default password “0000”. » After successful pairing and connection, the speaker beeps twice, and the Bluetooth indicator turns solid blue. 4 Repeat steps 1 to 3 to add a secondBluetooth device.Note • When there are two Bluetooth-enabled devices connected to the speaker, you can repeat steps 1 to 3 to add a new device. In this case, the earliest connected device will be replaced.Onkyo X3Onkyo X9DevicesBluetoothBluetoothON
7ENTo disconnect the Bluetooth-enabled device:• Disable Bluetooth on your device; or• Move the device beyond the communication range.To clear the existing pairing information:• Press and hold for 7 seconds.To reconnect the Bluetooth-enabled device:• For a paired Bluetooth device on which automatic reconnection is enabled, this product reconnects with it once it is detected. • For a paired Bluetooth device that does not support automatic reconnection, reconnect it with this product manually.Bluetooth indicator DescriptionFlashing blue Connecting or waiting for connectionSolid blue ConnectedPlay from a Bluetooth-enabled deviceNote • If there is an incoming call on the connected mobile phone, music play pauses.• After successful Bluetooth connection, play music on a connected Bluetooth device. » Music streams from your Bluetooth device to the speaker.Note • To play from another connected device, just use controls on that device directly and the music streaming from the current device will be paused.Button FunctionPress to answer an incoming call.During a call, press to end the current phone call.NoteControl your phone callAfter Bluetooth connection, you can control an incoming call with this speaker. • You can talk through the microphone of the speaker. • Music play pauses when there is an incoming call, and resumes when your phone call ends.
8EN5 Other featuresListen to an external deviceWith this speaker, you can also listen to an external audio device such as an MP3 player. 1 Make sure there is no music streaming from the connected Bluetooth device (if available).2 Connect an audio input cable with a 3.5 mm connector on both ends to• the AUX IN socket on this speaker, and• the headphone socket on the external device.3 Play music on the external device (refer to its user manual). » The speaker switches to the AUX IN source.Tip • When you start music streaming from a connected Bluetooth device, the speaker switches to the Bluetooth source automatically.Play through USBNote • Make sure that the USB device contains playable audio content. 1 Make sure there is no music streaming from the connected Bluetooth device (if available).2 Connect a USB charging cable to• the AUDIO IN socket on this speaker, and• the USB socket on your mobile phone.3 Play music on your mobile phone (refer to its user manual). » The speaker switches to the USB source.Note • When you start music streaming from a connected Bluetooth device, the speaker switches to the Bluetooth source automatically.
9ENAdjust volume • Press +/- on the speaker to increase or decrease the volume. Listen through a headphone• Plug a headphone (not supplied) into the socket.
10 EN6 Product informationNote • Product information is subject to change without prior notice.SpecicationsAmplierRated Output Power 4 x 10W, 1% THDFrequency Response 40 Hz - 20 kHz, ±3dBSignal to Noise Ratio > 80 dBAAux In 650mV (RMS), 22k ohmBluetoothBluetooth version V2.1SupportedProles HFP, A2DP, AVRCPRange 10 m (Free space)SpeakersSpeaker Impedance4 ohmSpeaker Driver 4 x 2" mid range drivers, 2 x 3/4" high freq tweeterSensitivity > 82dB/m/W ± 3dB/m/WGeneral informationPower AdaptorPower Input 100 - 2 0V, 50/60 HzDC Output 15V 3ABuilt-in Battery Lithium ion battery ( )Dimensions - Main Unit (W x H x D)195 x 93 x 51 mmWeight - Main Unit 0.6 kg4 11.1V,2200 mAh*)3'$ (*0(
11EN7 TroubleshootingWarning • Never remove the casing of this device.To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this device, check the following points before requesting service. If the problem remains unsolved, contact Onkyo service center. When you contact Onkyo, make sure that the device is nearby and the model number and serial number are available.GeneralNo power •Make sure that the AC power plug is connected properly. •Make sure that there is power at the AC outlet. •Recharge the built-in battery.No sound •Adjust volume on the speaker or the Bluetooth-connected device. •Make sure that your Bluetooth device is within the effective operational range.No response from the speaker •Restart the speaker.About Bluetooth deviceThe audio quality is poor after connection with a Bluetooth-enabled device. •The Bluetooth reception is poor. Move the device closer to this speaker or remove any obstacle between them.Cannot connect with the device. •The Bluetooth function of the device is not enabled. Refer to the user manual of the device for how to enable the function. •The speaker is not in pairing mode. Hold to enter pairing mode, and then try again.The paired device connects and disconnects constantly. •The Bluetooth reception is poor. Move the device closer to this product or remove any obstacle between them. •For some devices, Bluetooth connection may be deactivated automatically as a power-saving feature. This does not indicate any malfunction of this speaker.The speaker is in demo mode and not working as usual. •The demo mode is not intended for end users. You may have activated this mode by accident. In this case, press and hold for 15 seconds to exit demo mode and enter standby mode. Then you can power on and operate the speaker as usual.
12 EN8 NoticeAny changes or modications made to this device that are not expressly approved by Gibson Innovations may void the user’s authority to operate the equipment.Notice for the USA and CanadaThis device complies with and RSS standard . two conditions: 1 this device may not cause harmful interference, and2 this device must accept any interference received, including interference that may cause undesired operation.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules and CAN ICES-3(B)/NMB-3(B) of Industry Canada. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Relocate the receiving antenna.• Increase the separation between equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.RF Radiation Exposure Statement: This equipment complies with FCC’s and IC’s RF radiation exposure limits set forth for an uncontrolled environment. The antenna(s) used for this transmitter must be installed and operated to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. Installers must ensure that 20cm separation distance will be maintained between the device (excluding its handset) and users.CAN ICES-3(B)/NMB-3(B).Disposal of your old product Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.This product may contain lead and mercury. Disposal of these materials may be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities or visit www.recycle.philips.com.LeprésentappareilestconformeauxCNRd'IndustrieCanadaapplicablesauxappareilsradioexemptsdelicence.L'exploitationestautoriséeauxdeuxconditionssuivantes:(1)l'appareilnedoitpasproduiredebrouillage,et(2)l'utilisateurdel'appareildoitacceptertoutbrouillageradioélectriquesubi,mêmesilebrouillageestsusceptibled'encompromettrelefonctionnement.Industry Canada license-exempt (s) Part 15 of the FCC RulesOperation is subject to the following

Navigation menu