Giant Electronics T59XX Transmitter Portion of FRS + GMRS User Manual

Giant Electronics Ltd Transmitter Portion of FRS + GMRS

User manual

Model T5900, T5920, and T5950@6864110W17@6864110W17-O031048o4110w17o.book Page 1 Monday, January 20, 2003 12:20 PM
Introduction1PreliminaryIntroductionCongratulations on your purchase of a Motorola product!Product registration is an important step. Registering helps us facilitate warranty service and permits us to contact you should your Motorola product require an update or other service. To register your product on-line, visit www.motorola.com/warranty/radios.Please retain your original dated sales receipt for your records. For warranty service of your Motorola product, you will need to provide a copy of your dated sales receipt to confirm warranty status. Registration is not required for warranty coverage.For a copy of a large-print version of this guide, or for product-related questions, call:1-800-353-2729 in the USA1-888-390-6456 TTY (Text Telephone)On the Web: www.motorola.com/talkabout4110w17o.book Page 1 Monday, January 20, 2003 12:20 PM
Contents2PreliminaryContentsIntroduction . . . . . . . . . . . . . . . . . . . . . 1Safety and General Information . . . . 3FCC Licensing Information . . . . . . . 11Control Buttons . . . . . . . . . . . . . . . . 12Getting Started . . . . . . . . . . . . . . . . . 13Installing the AA Batteries . . . . . . . . 13Installing the NiCd Battery Pack . . . 14Battery Meter . . . . . . . . . . . . . . . . . . 14Using the Desk Stand Charger (Optional Accessory) . . . . . . . . . . 14Attaching the Belt Clip . . . . . . . . . . . 16Removing the Belt Clip . . . . . . . . . . 16Turning Your Radio On and Off . . . . 16Setting the Volume . . . . . . . . . . . . . 16Setting a Channel . . . . . . . . . . . . . . 16Channels and Frequencies . . . . . . . 17Talking and Listening . . . . . . . . . . . . 18Monitor Button . . . . . . . . . . . . . . . . . 18Special Features . . . . . . . . . . . . . . . . 19Interference Eliminator Codes . . . . . 19Push to Talk Timeout Timer . . . . . . . 19Keypad Lock . . . . . . . . . . . . . . . . . . 19Enhanced Scanning . . . . . . . . . . . . . 20Scan Advance . . . . . . . . . . . . . . . . . .21Removing Channels from the Scan List (Scan Delete) . . . . . . . . . . . . .21Alerts . . . . . . . . . . . . . . . . . . . . . . . . . .22Channel Busy Indicator . . . . . . . . . . .22Setting and Transmitting Call Tones .22Transmitting a Talk Confirmation Tone . . . . . . . . . . . . . . . . . . . . . . .23QT Noise Filtering . . . . . . . . . . . . . . .23VibraCall® Alert (Models T5920 and T5950 Only) . . . . . . . . . . . . . . . . .24Accessories . . . . . . . . . . . . . . . . . . . .25Using Audio Accessories . . . . . . . . . .25Handsfree Use Without Accessories (iVOX) . . . . . . . . . . . . . . . . . . . . . .25Handsfree Use with Accessories (VOX) . . . . . . . . . . . . . . . . . . . . . .26Setting the Sensitivity Level . . . . . . .264110w17o.book Page 2 Monday, January 20, 2003 12:20 PM
Safety and General Information3PreliminarySafety and General InformationImportant Information on Safe and Efficient OperationRead This Information Before Using Your RadioThe information provided in this document supersedes the general safety information contained in user guides published prior to July 2000.Transmit and Receive ProcedureYour two-way radio contains a transmitter and a receiver. To control your exposure and ensure compliance with the general population/uncontrolled environment exposure limits, always adhere to the following procedure: • Transmit no more than 50% of the time.• To transmit (talk), press the Push to Talk (PTT) button.• To receive calls, release the PTT button.Transmitting 50% of the time, or less, is important because the radio generates measurable RF energy exposure only when transmitting (in terms of measuring standards compliance).Exposure to Radio Frequency EnergyYour Motorola radio is designed to comply with the following national and international standards and guidelines regarding exposure of human beings to radio frequency electromagnetic energy:• United States Federal Communications Commission, Code of Federal Regulations; 47 CFR part 2 sub-part J4110w17o.book Page 3 Monday, January 20, 2003 12:20 PM
Safety and General Information4Preliminary• American National Standards Institute (ANSI)/Institute of Electrical and Electronic Engineers (IEEE) C95. 1-1992• Institute of Electrical and Electronic Engineers (IEEE) C95.1-1999 Edition• International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1998• Ministry of Health (Canada) Safety Code 6. Limits of Human Exposure to Radio Frequency Electromagnetic Fields in the Frequency Range from 3 kHz to 300 GHz, 1999• Australian Communications Authority Radiocommunications (Electromagnetic Radiation - Human Exposure) Standard 2001 (applicable to wireless phones only)• ANATEL, Brasil Regulatory Authority, Resolution 256 (April 11, 2002) “additional requirements for SMR, cellular, and PCS product certification.”To assure optimal radio performance and make sure human exposure to radio frequency electromagnetic energy is within the guidelines set forth in the above standards, always adhere to the following procedures.Portable Radio Operation and EME ExposureAntenna CareUse only the supplied or an approved replacement antenna. Unauthorized antennas, modifications, or attachments could damage the radio and may violate FCC regulations.DO NOT hold the antenna when the radio is “IN USE.” Holding the antenna affects the effective range.4110w17o.book Page 4 Monday, January 20, 2003 12:20 PM
Safety and General Information5PreliminaryTwo-Way Radio OperationWhen using your radio as a traditional two-way radio, hold the radio in a vertical position with the microphone one to two inches (2.5 to 5 cm) away from the lips.Body-Worn OperationTo maintain compliance with FCC/Health Canada RF exposure guidelines, if you wear a radio on your body when transmitting, always place the radio in a Motorola-supplied or approved clip, holder, holster, case, or body harness for this product. Use of non-Motorola-approved accessories may exceed FCC/Health Canada RF exposure guidelines. If you do not use one of the Motorola-supplied or approved body-worn accessories, and are not using the radio held in the normal use position, ensure the radio and its antenna are at least one inch (2.5 cm) from your body when transmitting.Data OperationIf applicable, when using any data feature of the radio with or without an accessory cable, position the radio and its antenna at least one inch (2.5 cm) from the body.Approved AccessoriesFor a list of approved Motorola accessories visit our website at www.mot.com.Electromagnetic Interference/CompatibilityNote:Nearly every electronic device is susceptible to electromagnetic interference (EMI) if inadequately shielded, designed, or otherwise configured for electromagnetic compatibility.4110w17o.book Page 5 Monday, January 20, 2003 12:20 PM
Safety and General Information6PreliminaryFacilitiesTo avoid electromagnetic interference and/or compatibility conflicts, turn off your radio in any facility where posted notices instruct you to do so. Hospitals or health care facilities may be using equipment that is sensitive to external RF energy.AircraftWhen instructed to do so, turn off your radio when on board an aircraft. Any use of a radio must be in accordance with applicable regulations per airline crew instructions.Medical Devices - PacemakersThe Advanced Medical Technology Association recommends that a minimum separation of six inches (15 cm) be maintained between a handheld wireless radio and a pacemaker. These recommendations are consistent with the independent research by, and recommendations of the U.S. Food and Drug Administration.Persons with pacemakers should:• ALWAYS keep the radio more than six inches (15 cm) from their pacemaker when the radio is turned ON.• Not carry the radio in the breast pocket.• Use the ear opposite the pacemaker to minimize the potential for interference.• Turn the radio OFF immediately if you have any reason to suspect that interference is taking place.4110w17o.book Page 6 Monday, January 20, 2003 12:20 PM
Safety and General Information7PreliminaryMedical Devices - Hearing AidsSome digital wireless radios may interfere with some hearing aids. In the event of such interference, you may want to consult your hearing aid manufacturer to discuss alternatives.Other Medical DevicesIf you use any other personal medical device, consult the manufacturer of your device to determine if it is adequately shielded from RF energy. Your physician may be able to assist you in obtaining this information.Safety and General Use While DrivingCheck the laws and regulations on the use of radios in the area where you drive. Always obey them. When using your radio while driving, please:• Give full attention to driving and to the road.• Use hands-free operation, if available.• Pull off the road and park before making or answering a call if driving conditions so require.Operational WarningsFor Vehicles with an Air BagDo not place a portable radio in the area over an air bag or in the air bag deployment area. Air bags inflate with great force. If a portable radio is placed in the air bag deployment area and the air bag inflates, the radio may be propelled with great force and cause serious injury to occupants of the vehicle.4110w17o.book Page 7 Monday, January 20, 2003 12:20 PM
Safety and General Information8PreliminaryPotentially Explosive AtmospheresTurn off your radio prior to entering any area with a potentially explosive atmosphere, unless it is a radio type especially qualified for use in such areas as “Intrinsically Safe.” Do not remove, install, or charge batteries in such areas. Sparks in a potentially explosive atmosphere can cause an explosion or fire resulting in bodily injury or even death.Note:The areas with potentially explosive atmospheres referred to above include fueling areas such as below decks on boats, fuel or chemical transfer or storage facilities, areas where the air contains chemicals or particles, such as grain, dust or metal powders, and any other area where you would normally be advised to turn off your vehicle engine. Areas with potentially explosive atmospheres are often but not always posted.Blasting Caps and AreasTo avoid possible interference with blasting operations, turn off your radio when you are near electrical blasting caps, in a blasting area, or in areas posted: “Turn off two-way radio.” Obey all signs and instructions.Operational CautionsAntennasDo not use any portable radio that has a damaged antenna. If a damaged antenna comes into contact with your skin, a minor burn can result.4110w17o.book Page 8 Monday, January 20, 2003 12:20 PM
Safety and General Information9PreliminaryBatteriesAll batteries can cause property damage and/or bodily injury such as burns if a conductive material such as jewelry, keys, or beaded chains touch exposed terminals. The conductive material may complete an electrical circuit (short circuit) and become quite hot. Exercise care in handling any charged battery, particularly when placing it inside a pocket, purse, or other container with metal objects.Battery Charger Safety InstructionsSave these Instructions1. Do not expose the charger to rain or snow.2. Do not operate or disassemble the charger if it has received a sharp blow, or has been dropped or damaged in any way.3. Never alter the AC cord or plug provided with the unit. If the plug will not fit the outlet, have the proper outlet installed by a qualified electrician. An improper condition can result in a risk of electric shock.4. To reduce the risk of damage to the cord or plug, pull the plug rather than the cord when disconnecting the charger from the AC receptacle.5. To reduce the risk of electric shock, unplug the charger from the outlet before attempting any maintenance or cleaning.6. Use of an attachment not recommended or sold by Motorola may result in a risk of fire, electric shock, or personal injury.7. Make sure the cord is located so it will not be stepped on, tripped over, or sub-jected to damage or stress.4110w17o.book Page 9 Monday, January 20, 2003 12:20 PM
Safety and General Information10Preliminary8. An extension cord should not be used unless absolutely necessary. Use of an improper extension cord could result in a risk of fire and/or electric shock. If an extension cord must be used, make sure that:• The pins on the plug of the extension cord are the same number, size, and shape as those on the plug of the charger.• The extension cord is properly wired and in good electrical condition.• The cord size is 18 AWG for lengths up to 100 feet, and 16 AWG for lengths up to 150 feet.9. The supply cord of this charger cannot be replaced. If the cord is damaged, call Motorola Product Services at 1-800-353-2729 in the USA or 1-888-390-6456 TTY (Text Telephone).4110w17o.book Page 10 Monday, January 20, 2003 12:20 PM
FCC Licensing Information11PreliminaryFCC Licensing InformationYour Motorola radio operates on General Mobile Radio Service (GMRS) frequencies and is subject to the Rules and Regulations of the Federal Communications Commission (FCC). The FCC requires that all operators using GMRS frequencies obtain a radio license before operating their equipment. To obtain the FCC forms, please request Forms 605 and 159, which includes all forms and instructions. If you wish to have the document faxed or mailed, or have questions, please use the following contact information. Changes or modifications not expressly approved by Motorola may void the user’s authority granted by the FCC to operate this radio and should not be made. To comply with FCC requirements, transmitter adjustments should be made only by or under the supervision of a person certified as technically qualified to perform transmitter maintenance and repairs in the private land mobile and fixed services as certified by an organization representative of the user of those services. Replacement of any transmitter component (crystal, semiconductor, etc.) not authorized by the FCC equipment authorization for this radio could violate FCC rules.Note:Use of this radio outside the country where it was intended to be distributed is subject to government regulations and may be prohibited.FaxedContact the Fax-On-Demand system at: Mailed Call the FCC forms hotline at:QuestionsRegarding FCC licenseContact the FCC at:1-202-418-0177 1-800-418-FORM1-800-418-36761-888-CALL-FCC 1-888-225-5322Or: http://www.fcc.gov4110w17o.book Page 11 Monday, January 20, 2003 12:20 PM
Control Buttons12PreliminaryControl ButtonsUse P to:• Turn power on/off• Adjust volumeLED Indicator LightUse M to: • Talk • Save a settingUse ^ to: • Transmit call toneSpeakerUse \ to:• Lock the keypad (when held down and not in a menu)• Exit the menu (when pressed while in a menu)Accessory Jack CoverUse Q to: • Monitor channel activityUse [ ]to:• Scroll through menusMicrophone2238\<>J^4110w17o.book Page 12 Monday, January 20, 2003 12:20 PM
Getting Started13PreliminaryGetting StartedInstalling the AA BatteriesYour radio uses 3 AA Alkaline batteries.1. With the back of the radio facing you, lift the battery latch up to release the battery cover and remove the cover.2. Insert 3 AA Alkaline batteries as shown on the inside of the battery compartment.3. Reposition the battery cover and press down to secure.Note: A NiCd rechargeable battery can be used instead of 3 AA Alkaline batteries. A rechargeable battery upgrade kit, model number 53614, is available. For the dealer nearest you, call 1-800-353-2729 in the USA, or visit our website at www.motorola.com/talkabout.Latch4110w17o.book Page 13 Monday, January 20, 2003 12:20 PM
Getting Started14PreliminaryInstalling the NiCd Battery Pack1. Follow step 1 above to remove the battery cover.2. Remove the battery pack from the clear plastic bag. Do not disassemble or unwrap the battery pack.3. Insert the NiCd battery pack so the metal contacts on the side of the battery are facing outward from the radio to connect with the contacts on the battery door. 4. Reposition the battery cover and press down to secure.Battery MeterThe battery icon shows the battery charge level, from full d to empty a. When the battery is empty, the radio chirps periodically after releasing M.The radio powers off when the voltage drops below a predetermined level to protect the rechargeable battery.Note: Remove the batteries before storing your radio for extended periods of time. Batteries corrode over time and may cause permanent damage to your radio.Using the Desk Stand Charger (Optional Accessory)The desk stand charger provides drop-in charging convenience for NiCd batteries and can be placed on any flat surface, such as a desk or workbench. Charge the NiCd battery overnight (at least 16 hours) before using it for the first time. After the initial charge, an empty battery is fully charged within 14 hours.4110w17o.book Page 14 Monday, January 20, 2003 12:20 PM
Getting Started15Preliminary1. Turn the radio off and remove the battery cover.2. Remove the battery pack from the clear plastic bag. Do not disassemble or unwrap the battery pack.3. Insert the NiCd battery pack so the metal contacts on the side of the battery are facing outward from the radio to connect with the contacts on the battery door.4. Reposition the battery cover and press down to secure.5. Plug the AC power supply into the plug on the desk stand.6. Plug the AC power supply into a standard wall outlet.7. Slide the radio into one of the charging pockets facing forward.To charge the battery pack separately from the radio:1. Remove the battery pack from the clear plastic bag. Do not disassemble or unwrap the battery pack.2. Insert the battery pack into the charging pocket. Make sure the metal contacts on the side of the battery are making contact with the contacts inside the charger.3. Plug the AC power supply into the plug on the desk stand.4. Plug the AC power supply into a standard wall outlet.Notes• When moving between hot and cold temperatures, do not charge the battery until the battery temperature acclimates (usually about 20 minutes).4110w17o.book Page 15 Monday, January 20, 2003 12:20 PM
Getting Started16Preliminary• For optimal battery life, remove the radio or battery from the charger within 16 hours. Do not store the radio in the charger.Attaching the Belt Clip1. Align the belt clip post with the hole in the back of the radio.2. Gently push until the clip clicks into place.Removing the Belt Clip1. Push down on the release tab at the top of the belt clip to release the catch.2. Pull the belt clip away from the back of the radio.Turning Your Radio On and OffTurn P clockwise to turn the radio on and counterclockwise to turn the radio off. The radio chirps and the display briefly shows all feature icons available on your radio. The display then scrolls through the available channels and Interference Eliminator Codes.Setting the VolumeRotate P while holding down J until you reach a comfortable listening level. Rotate P clockwise to increase or counterclockwise to decrease the volume.Setting a ChannelYour radio has 22 channels. When the radio is on a 1 watt channel, z displays. When the radio is on a 0.5 watt channel, y displays.4110w17o.book Page 16 Monday, January 20, 2003 12:20 PM
Getting Started17Preliminary1. With the radio on, press \. The current channel flashes.2. Press ] or [ to set the channel.3. Press M to save the channel setting.Channels and FrequenciesChannel Frequency Description Channel Frequency Description1 462.5625 MHz GMRS/FRS 12 467.6625 MHz FRS2 462.5875 MHz GMRS/FRS 13 467.6875 MHz FRS3 462.6125 MHz GMRS/FRS 14 467.7125 MHz FRS4 462.6375 MHz GMRS/FRS 15 462.5500 MHz GMRS5 462.6625 MHz GMRS/FRS 16 462.5750 MHz GMRS6 462.6875 MHz GMRS/FRS 17 462.6000 MHz GMRS7 462.7125 MHz GMRS/FRS 18 462.6250 MHz GMRS8 467.5625 MHz FRS 19 462.6500 MHz GMRS9 467.5875 MHz FRS 20 462.6750 MHz GMRS10 467.6125 MHz FRS 21 462.7000 MHz GMRS11 467.6375 MHz FRS 22 462.7250 MHz GMRS4110w17o.book Page 17 Monday, January 20, 2003 12:20 PM
Talking and Listening18PreliminaryTalking and ListeningTo communicate, all radios in your group must be set to the same channel (1-22) and Interference Eliminator Code (1-99).To talk, press and hold M. Hold the radio 2 to 3 inches away from your mouth when talking. The LED indicator light glows continuously when transmitting.When you finish talking, release M (press to talk, release to listen).Note: Do not use the radios closer than 5 feet apart.Monitor ButtonPressing and holding J allows you to listen to the volume level of the radio when you are not receiving. This allows you to adjust the volume, if necessary. You can also use J to check for activity on the current channel before you transmit (talk). 4110w17o.book Page 18 Monday, January 20, 2003 12:20 PM
Special Features19PreliminarySpecial FeaturesInterference Eliminator CodesInterference Eliminator Codes help minimize interference by providing you with a choice of code combinations.To set the code for a channel:1. Press \ until the code starts to flash.2. Press ] or [ to select the code.3. Press M to save the code setting.You can set a different code for each channel using this procedure.Note: You must set the Interference Eliminator Code to 0 on an FRS radio that uses Interference Eliminator Codes to communicate with other FRS radios that do not have Interference Eliminator Codes.Push to Talk Timeout TimerTo prevent accidental transmissions and save battery life, the radio emits a continuous warning tone and stops transmitting if you press M for 60 continuous seconds.Keypad LockTo avoid accidentally changing your radio settings, press and hold \ for 3 seconds or until f displays. You can turn the radio on and off, adjust the 4110w17o.book Page 19 Monday, January 20, 2003 12:20 PM
Special Features20Preliminaryvolume, receive, transmit, send a call tone, and monitor channels. All other functions are locked.To unlock the radio, press and hold \ for 3 seconds or until f is no longer displayed.Enhanced ScanningScanning is used to:• Monitor channels and codes for transmissions and lock in on one that interests you.• Find someone in your group who has accidentally changed channels and is talking during your scan.With enhanced scanning, your home channel is scanned more frequently than any other channel. The home channel is the channel your radio was set to when you started to scan. If you activate scan while your radio’s Interference Eliminator Code is set to 0, the radio checks for activity on each channel regardless of the code in use on that channel. If you activate scan while your radio’s Interference Eliminator Code is set to 1-99, the radio checks for activity on each channel, but only for codes 1-99. All transmissions using code 0 are ignored. To start scanning, briefly press and release J. The scan indicator h displays and the radio begins to scroll through the channel and Interference Eliminator Code combinations.4110w17o.book Page 20 Monday, January 20, 2003 12:20 PM
Special Features21PreliminaryWhen the radio detects activity, it stops scanning and you can hear the transmission on that channel. To respond and talk to the person transmitting, press M within 5 seconds.To stop scanning, briefly press and release J. Note: If you press M while the radio is scanning, the radio transmits on the channel you selected before you activated scan. If no transmission occurs within 5 seconds, scanning will resume.Scan AdvanceIf the radio stops scanning on a channel you do not want to listen to, briefly press and release ] or [ to resume scanning for the next active channel.Removing Channels from the Scan List (Scan Delete)To prevent the radio from scanning a channel, press and hold [ or ] for at least 3 seconds, then release, when the scan first stops on that channel. This temporarily removes the channel from the scan list. To restore the channel, turn the radio off and then back on.Note: You cannot remove your home channel from the scan list. The home channel is the channel your radio was set to when you started scanning.4110w17o.book Page 21 Monday, January 20, 2003 12:20 PM
Alerts22PreliminaryAlertsChannel Busy IndicatorWhen a channel is busy, the LED flashes twice per second.Setting and Transmitting Call Tones Your radio has 10 different call tones that you can transmit to other radios in your group to alert them that you want to talk.To set a call tone:1. With the radio on, press \ 3 times. The current call tone setting flashes and E displays.2. Press ] or [ to change and hear the call tone.3. Press \ or M to set the new call tone. To transmit your call tone to other radios set to the same channel and Interference Eliminator Code as your radio, press ^.Note: Setting the call tone to 0 disables the call tone feature.4110w17o.book Page 22 Monday, January 20, 2003 12:20 PM
Alerts23PreliminaryTransmitting a Talk Confirmation ToneYou can set your radio to transmit a unique tone when you finish transmitting. It is like saying Roger or Over to let others know you are finished talking. • To turn talk confirmation on, press and hold ] while you turn the radio on. When you release M after transmitting, your call tone transmits and ! displays.• To turn talk confirmation off, turn your radio off and then back on while pressing and holding ].QT Noise FilteringThe QT noise filtering feature helps ensure uninterrupted communication by preventing you from hearing transmissions from other radios. It is useful in places where there is heavy radio traffic, such as at an amusement park or ski resort.Note: QT noise filtering is not available while the radio is scanning. To turn QT noise filtering on and off:1. Press \ until F displays.2. Press ] until Y displays to turn QT noise filtering on, or [ to turn it off.3. Press \ to confirm your selection.To transmit to a radio that has QT noise filtering turned on:1. Select the same channel and Interference Eliminator Code as the other radio.2. Press ^ to send a call tone and temporarily open the speaker on the receiving radio.4110w17o.book Page 23 Monday, January 20, 2003 12:20 PM
Alerts24PreliminaryNow you can transmit and receive as usual.If you do not transmit or receive for 30 seconds, the QT noise filtering feature will close the speaker on the receiving radio. Press ^ to open the speaker on the receiving radio again.VibraCall® Alert (Models T5920 and T5950 Only)VibraCall is a vibrating alert that notifies you that your radio is receiving a message. This is useful in noisy environments. When the alert is on, the radio vibrates once every 30 seconds when you receive a message on the channel and code you set.• To turn vibrating alerts on, press \ until i is displayed, then press ] to display Y. • To turn vibrating alerts off, press [ until < is displayed in the same menu. 4110w17o.book Page 24 Monday, January 20, 2003 12:20 PM
Accessories25PreliminaryAccessoriesThere are many accessories (sold separately) available for your radio. For more information, refer to the brochure included with your radio, contact the place of purchase, call Motorola at 1-800-353-2729 in the USA or 1-800-739-7834 (TTY), or visit our website at www.motorola.com/talkabout.Using Audio Accessories1. Make sure the radio is off.2. Plug the audio accessory into the accessory port (see page 12 for accessory port location).3. Turn the radio on. Lower the volume before placing the accessory on your head or in your ear.4. Press J while rotating P to adjust the volume to a comfortable level.5. To transmit, press M and speak into the accessory microphone, if any.6. To receive, release M.Handsfree Use Without Accessories (iVOX)You can use the radio’s iVOX feature to transmit handsfree without the need for any additional voice activation (VOX) accessories. Once this feature is activated, the radio detects your voice and transmits when you speak.1. Press \ until g flashes.2. Press ] or [ until Y displays.4110w17o.book Page 25 Monday, January 20, 2003 12:20 PM
Accessories26Preliminary3. Press M twice to confirm.Handsfree Use with Accessories (VOX) You can transmit handsfree with the use of optional accessories. Once this feature is activated, the radio detects your voice and transmits when you speak.1. Make sure the radio is off.2. Plug the VOX accessory into the accessory port (see page 12 for accessory port location).3. Turn the radio volume down, and then turn the radio on. g flashes on the display.4. Adjust the volume appropriately by pressing ] or [.Note: There is a short delay between the time you start talking and when the radio transmits.To turn VOX off, press Mor remove the audio accessory.Setting the Sensitivity Level Adjusting the radio’s sensitivity level helps minimize the possibility of unintended noises triggering a transmission and helps the radio pick up soft voices.1. Press \ until g displays. 4110w17o.book Page 26 Monday, January 20, 2003 12:20 PM
Accessories27Preliminary2. Press ] or [ to select the sensitivity level:Note: When you connect a VOX accessory, the radio is automatically set to the last chosen sensitivity level.3 = High Sensitivity for quiet environments 2 = Medium Sensitivity for most environments 1 = Low Sensitivity for noisy environments4110w17o.book Page 27 Monday, January 20, 2003 12:20 PM
38MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. All other product or service names are the property of their respective owners.• 22 Channels (8 GMRS, 7 GMRS) with 99 Interference Eliminator CodesGMRS channels feature increased power for longer range. 14 channesl ensure backward compatibility with FRS two-way radios. Eliminator Codes help minimize interference from other groups.• Up to 5 mile range**Range will vary based on terrain and conditions.• VibraCall® Alert)Privately alerts you of an incoming call (Models T5920 and T5950 only)• Audible Call TonesMultiple distinct ringing options so your group can identify who’s calling• Enhanced Weather Resistance (T5820 only)Rubber seals provide added protection against the elements• Durable, fixed antennaMaximizes talk range• Talk Confirmation ToneSignals others you are finished talking• Keypad LockPrevents your settings from being accidentally changed• Priority ScanningEasily finds your group’s channel and code by searching all combinations• Motorola QualityShock, drop, and temperature tested to meet Motorola's high quality standards• Talk Handsfree (VOX) Voice activation (VOX) letsyou talk handsfree when used with optional accessories• 1 Year Limited WarrantyTo obtain a copy of thiswarranty prior to purchase, please ask your retailer• User’s Guide included• Low Battery AlertAudible tone and visualdisplay tell you that yourbattery is running down• Quick Release Swivel Belt Clip (included)• Illuminated DisplayEasy to read your settings in dark placesFCC GMRS License RequiredPWARNING CHOKING HAZARD SMALL PARTSNot for children under 3 years.This product is not intended to be used as a toy or plaything.4110w17o.book Page 38 Monday, January 20, 2003 12:20 PM

Navigation menu