GemTek Technology F240WA 7368 ISAM CPE User Manual

Gemtek Technology Co., Ltd. 7368 ISAM CPE Users Manual

Contents

Users Manual

Copyright © Gemtek Technology Co., Ltd.All Rights Reserved. 2015/7/21HGW F-240W-A User manual2015.07 v1.01
Copyright © Gemtek Technology Co., Ltd.All Rights Reserved. 2015/7/21OutlineExteriorInterfaceAccessoryHGW LED definitionBackupStatement2
Copyright © Gemtek Technology Co., Ltd.All Rights Reserved. 2015/7/21Exterior 3
Copyright © Gemtek Technology Co., Ltd.All Rights Reserved. 2015/7/21Interface 4LAN portUSB port : USB 3.0 & 2.0PowerPower inForeign eXchange StationResetG.fast/Vplus-VDLS2 interfaces
Copyright © Gemtek Technology Co., Ltd.All Rights Reserved. 2015/7/21Accessory 5ONT ＊1RJ-11 Cable 1.8m ＊1RJ-11 Cable 1.5m ＊1RJ-45 Cable 1.5m ＊1Power Adapter ＊1Power Cable ＊1Pedestal *1
Copyright © Gemtek Technology Co., Ltd.All Rights Reserved. 2015/7/21HGW LED definition 6LED Color(S) Activity DescriptionPower (TOP)GreenSolid Power on(self test succeeded)flash Device POSTING and BOOTINGOff Power OffRedSolidPOST fails on startup (example, flash is corrupt). So in Hardware the LED should be RED by default until the software is running which can then turn it green. Normally the ONT should also do a self-test on power-up. If Self-test fails the LED should remain REDDuring operations the ONT fails (Device Malfunction): On regular intervals the ONT should run a self-test and if it fails the LED should turn RED.flash Firmware upgrade ongoingOff System is in normal conditionRPF (TOP)Green Solid reverse power activeAmber Solid reverse power in detection modeOff Off reverse power is offG.fast/Vplus-VDLS2(TOP) GreenSolid Provisioned and registered(VDSL2) flashFlashing at 2 Hz with a 50% duty cycle: DSL carrier detection ongoing;Flashing at 4 Hz with a 50% duty cycle: Carrier has been detected, DSL training is ongoing;Off not provisionedAmberSolid Provisioned and registered(Gfast/Vplus)flashFlashing at 2 Hz with a 50% duty cycle: DSL carrier detection ongoing;Flashing at 4 Hz with a 50% duty cycle: Carrier has been detected, DSL training is ongoing;Off not provisioned
Copyright © Gemtek Technology Co., Ltd.All Rights Reserved. 2015/7/21HGW LED definition 7LED Color(S) Activity DescriptionEthernet WAN or LAN(1~5)(TOP))Green(10/100M)Solid Ethernet Linkflash Data Transmitting / ReceivingAmber(1000M)Solid Ethernet Linkflash Data Transmitting / ReceivingFXS/ POTS(1,2)(TOP)GreenSolid Provides a positive indication that at least one of the POTS lines, provisioned on the respective Service Unit, has a telephone in the off-hook condition.flash Call in or on talkingOff Telephone at POTS ports are all on-hook.VOIP(TOP) Green Solid VoIP service is built up and can provide serviceOff VoIP service is not built up or out of service.WPS 11n(TOP)Green Solid "Success" statusOff WPS disabledRed Solid "Error" and "Session Overlap" statusOff WPS disabledWPS 11ac(TOP)Green Solid "Success" statusOff WPS disabledRed Solid "Error" and "Session Overlap" statusOff WPS disabledWLAN11n(TOP)GreenSolid WLAN link upflash WLAN activityOff WLAN is down or no link connected.WLAN11ac(TOP)GreenSolid WLAN link upflash WLAN activityOff WLAN is down or no link connected.
Copyright © Gemtek Technology Co., Ltd.All Rights Reserved. 2015/7/21HGW LED definition 8LED Color(S) Activity DescriptionUSB(1,2)(TOP) GreenSolid A device is conneced to the USB portflash Traffic activity on the USB connectionOff No device connected to the USB port.Internet(TOP) GreenSolidIP connected (the device has a WAN IP address from IPCP/DHCP/Static and Broadband link is up). If the PPPoE session is dropped due to an idle timeout, the light will remain green if the G.fast link is still present. If the session is dropped for any other reason, the light is turned off.flash The device is in the process of acquiring an IP address (either via PPPoE or DHCP).Off Broadband physical connection power off, or device in bridged mode with no IP address assigned to the device, or Broadband physical interface connection not present
Copyright © Gemtek Technology Co., Ltd.All Rights Reserved. 2015/7/21Backup 9
Copyright © Gemtek Technology Co., Ltd.All Rights Reserved. 2015/7/21Federal Communication Commission Interference Statement 10This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in aresidential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installedand used in accordance with the instructions, may cause harmful interference to radio communications. However,there is no guarantee that interference will not occur in a particular installation. If this equipment does causeharmful interference to radio or television reception, which can be determined by turning the equipment off andon, the user is encouraged to try to correct the interference by one of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.Consult the dealer or an experienced radio/TV technician for help.FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Copyright © Gemtek Technology Co., Ltd.All Rights Reserved. 2015/7/21Federal Communication Commission Interference Statement 11IMPORTANT NOTE:Radiation Exposure Statement:This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. Thisequipment should be installed and operated with minimum distance 20cm between the radiator & your body.This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.Country Code selection feature to be disabled for products marketed to the US/CANADAOperation of this device is restricted to indoor use only
Copyright © Gemtek Technology Co., Ltd.All Rights Reserved. 2015/7/21EU Declaration of Conformity 12This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The following testmethods have been applied in order to prove presumption of conformity with the essential requirements of theR&TTE Directive 1999/5/EC:EN 60950-1:2006 + A1:2010 + A11:2009 + A12:2011 + A2:2013Safety of Information Technology EquipmentEN 62311: 2008 / Article 3(1)(a) and Article 2 2006/95/EC)Assessment of electronic and electrical equipment related to human exposure restrictions for electromagneticfields (0 Hz-300 GHz)EN 300 328 V1.9.1: 2015-02Electromagnetic compatibility and Radio spectrum Matters (ERM);Wideband transmission systems; Datatransmission equipment operating in the 2,4 GHz ISM band and using wide band modulation techniques;Harmonized EN covering the essential requirements of article 3.2 of the R&TTE DirectiveEN 301 893 V1.7.1: 2012-06Broadband Radio Access Networks (BRAN); 5 GHz high performance RLAN; Harmonized EN covering theessential requirements of article 3.2 of the R&TTE DirectiveEN 301 489-1 V1.9.2: 2011Electromagnetic compatibility and Radio spectrum Matters (ERM); Electro Magnetic Compatibility (EMC)standard for radio equipment and services; Part 1: Common technical requirementsEN 301 489-17 V2.2.1 2012Electromagnetic compatibility and Radio spectrum Matters (ERM); Electro Magnetic Compatibility (EMC)standard for radio equipment; Part 17: Specific conditions for Broadband Data Transmission Systems
Copyright © Gemtek Technology Co., Ltd.All Rights Reserved. 2015/7/21EU Declaration of Conformity 13In Italy the end-user should apply for a license at the national spectrum authorities in order to obtainauthorization to use the device for setting up outdoor radio links and/or for supplying public access totelecommunications and/or network services.Česky[Czech][Jméno výrobce] tímto prohlašuje, že tento [typ zařízení] je ve shodě se základními požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES.Dansk [Danish]Undertegnede [fabrikantens navn] erklærer herved, at følgende udstyr [udstyrets typebetegnelse]overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.Deutsch [German]Hiermit erklärt [Name des Herstellers], dass sich das Gerät [Gerätetyp] in Übereinstimmung mit den grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet.Eesti [Estonian]Käesolevaga kinnitab [tootja nimi = name of manufacturer] seadme [seadme tüüp = type of equipment] vastavust direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele sätetele.English Hereby, [name of manufacturer], declares that this [type of equipment] is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.Español [Spanish]Por medio de la presente [nombre del fabricante] declara que el [clase de equipo] cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de 1999/5/CE.Ελληνική [Greek]ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ [name of manufacturer] ΔΗΛΩΝΕΙ ΟΤΙ [type of equipment] ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ.Français [French]Par la présente [nom du fabricant] déclare que l'appareil [type d'appareil] est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE.
Copyright © Gemtek Technology Co., Ltd.All Rights Reserved. 2015/7/21EU Declaration of Conformity 14Italiano[Italian]Con la presente [nome del costruttore] dichiara che questo [tipo di apparecchio] è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.Latviski [Latvian]Ar šo [name of manufacturer / izgatavotāja nosaukums] deklarē, ka [type of equipment / iekārtas tips] atbilst Direktīvas 1999/5/EK būtiskajām prasībām un citiem ar to saistītajiem noteikumiem.Lietuvių [Lithuanian] Šiuo [manufacturer name] deklaruoja, kad šis [equipment type] atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas.Nederlands [Dutch]Hierbij verklaart [naam van de fabrikant] dat het toestel [type van toestel] in overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG.Malti [Maltese]Hawnhekk, [isem tal-manifattur], jiddikjara li dan [il-mudel tal-prodott] jikkonforma mal-ħtiġijiet essenzjali u ma provvedimenti oħrajn relevanti li hemm fid-Dirrettiva 1999/5/EC.Magyar [Hungarian]Alulírott, [gyártó neve] nyilatkozom, hogy a [... típus] megfelel a vonatkozó alapvetõ követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak.Polski [Polish] Niniejszym [nazwa producenta] oświadcza, że [nazwa wyrobu] jest zgodny z zasadniczymi wymogami oraz pozostałymi stosownymi postanowieniami Dyrektywy 1999/5/EC.Português [Portuguese][Nome do fabricante] declara que este [tipo de equipamento] está conforme com os requisitos essenciais e outras disposições da Directiva 1999/5/CE.Slovensko [Slovenian][Ime proizvajalca] izjavlja, da je ta [tip opreme] v skladu z bistvenimi zahtevami in ostalimi relevantnimi določili direktive 1999/5/ES.Slovensky [Slovak][Meno výrobcu] týmto vyhlasuje, že [typ zariadenia] spĺňa základné požiadavky a všetky príslušné ustanovenia Smernice 1999/5/ES.Suomi [Finnish][Valmistaja = manufacturer] vakuuttaa täten että [type of equipment = laitteen tyyppimerkintä]tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen.
Copyright © Gemtek Technology Co., Ltd.All Rights Reserved. 2015/7/21EU Declaration of Conformity 15

Navigation menu